Advertisement
Guest User

Untitled

a guest
Feb 18th, 2020
200
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.81 KB | None | 0 0
  1. [ 0.000000] Linux version 4.14.169 (gl@gl-pc) (gcc version 8.3.0 (OpenWrt GCC 8.3.0 r12238-dc145de4be)) #0 Mon Feb 17 19:23:59 2020
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
  4. [ 0.000000] SoC: Atheros AR9344 rev 3
  5. [ 0.000000] Determined physical RAM map:
  6. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  7. [ 0.000000] User-defined physical RAM map:
  8. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  18. [ 0.000000] On node 0 totalpages: 32768
  19. [ 0.000000] free_area_init_node: node 0, pgdat 805cf2f0, node_mem_map 81000020
  20. [ 0.000000] Normal zone: 288 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  23. [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x4a8 with crng_init=0
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
  27. [ 0.000000] Kernel command line: benand_no_swecc=2 lcd_ctrl=84 parts=1 boot_part_size=4194304 gpio=249403 HZ=300000000 mem=128M kmac=C4:AD:34:24:2E:AF board=2011r5 board=2011r5 board_rev=r2 ver=6.45.3 bver=6.45.3 hw_opt=00718004 boot=1 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd
  28. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  31. [ 0.000000] Writing ErrCtl register=00000000
  32. [ 0.000000] Readback ErrCtl register=00000000
  33. [ 0.000000] Memory: 123392K/131072K available (4407K kernel code, 188K rwdata, 972K rodata, 184K init, 217K bss, 7680K reserved, 0K cma-reserved)
  34. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. [ 0.000000] NR_IRQS: 51
  36. [ 0.000000] Clocks: CPU:600.000MHz, DDR:400.000MHz, AHB:400.000MHz, Ref:25.000MHz
  37. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
  38. [ 0.000009] sched_clock: 32 bits at 300MHz, resolution 3ns, wraps every 7158278654ns
  39. [ 0.008861] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
  40. [ 0.085997] pid_max: default: 32768 minimum: 301
  41. [ 0.091521] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.099036] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.110214] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  44. [ 0.121433] futex hash table entries: 256 (order: -1, 3072 bytes)
  45. [ 0.129708] NET: Registered protocol family 16
  46. [ 0.139564] MIPS: machine is Mikrotik RouterBOARD RB2011UiAS-2HnD
  47. [ 0.651023] clocksource: Switched to clocksource MIPS
  48. [ 0.657964] NET: Registered protocol family 2
  49. [ 0.663834] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  50. [ 0.671805] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  51. [ 0.679023] TCP: Hash tables configured (established 1024 bind 1024)
  52. [ 0.686392] UDP hash table entries: 256 (order: 0, 4096 bytes)
  53. [ 0.693078] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  54. [ 0.700487] NET: Registered protocol family 1
  55. [ 0.705511] PCI: CLS 0 bytes, default 32
  56. [ 0.710065] Crashlog allocated RAM at address 0x3f00000
  57. [ 0.717528] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  58. [ 0.730919] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  59. [ 0.737592] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  60. [ 0.762107] io scheduler noop registered
  61. [ 0.766564] io scheduler deadline registered (default)
  62. [ 0.772860] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  63. [ 0.782215] console [ttyS0] disabled
  64. [ 0.806436] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
  65. [ 0.816239] console [ttyS0] enabled
  66. [ 0.823807] bootconsole [early0] disabled
  67. [ 0.839841] m25p80 spi0.0: found gd25d05, expected m25p80
  68. [ 0.847420] m25p80 spi0.0: gd25d05 (64 Kbytes)
  69. [ 0.852659] Creating 4 MTD partitions on "spi0.0":
  70. [ 0.857631] 0x000000000000-0x00000000c000 : "routerboot"
  71. [ 0.865076] 0x00000000c000-0x00000000d000 : "hard_config"
  72. [ 0.872158] 0x00000000d000-0x00000000e000 : "bios"
  73. [ 0.879330] 0x00000000e000-0x00000000f000 : "soft_config"
  74. [ 0.888075] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  75. [ 0.894695] nand: Samsung NAND 128MiB 3,3V 8-bit
  76. [ 0.899470] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  77. [ 0.907338] Scanning device for bad blocks
  78. [ 0.917224] random: fast init done
  79. [ 1.053594] Creating 3 MTD partitions on "ar934x-nfc":
  80. [ 1.058925] 0x000000000000-0x000000040000 : "booter"
  81. [ 1.065950] 0x000000040000-0x000000400000 : "kernel"
  82. [ 1.072615] 0x000000400000-0x000008000000 : "ubi"
  83. [ 1.083174] libphy: Fixed MDIO Bus: probed
  84. [ 1.103722] libphy: ag71xx_mdio: probed
  85. [ 1.116833] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
  86. [ 1.842730] libphy: ag71xx_mdio: probed
  87. [ 2.472492] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316]
  88. [ 2.484058] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii
  89. [ 3.112805] ag71xx-mdio.1: Found an AR934X built-in switch
  90. [ 3.165092] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
  91. [ 3.172840] NET: Registered protocol family 10
  92. [ 3.181748] Segment Routing with IPv6
  93. [ 3.185644] NET: Registered protocol family 17
  94. [ 3.190300] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  95. [ 3.203730] 8021q: 802.1Q VLAN Support v1.8
  96. [ 3.212888] UBI: auto-attach mtd6
  97. [ 3.216351] ubi0: attaching mtd6
  98. [ 4.501693] ubi0: scanning is finished
  99. [ 4.523396] ubi0: attached mtd6 (name "ubi", size 124 MiB)
  100. [ 4.529078] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  101. [ 4.536221] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  102. [ 4.543248] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  103. [ 4.550435] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0
  104. [ 4.556651] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  105. [ 4.564125] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 427379365
  106. [ 4.573482] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20
  107. [ 4.583089] ubi0: background thread "ubi_bgt0d" started, PID 392
  108. [ 4.591109] block ubiblock0_1: created from ubi0:1(rootfs)
  109. [ 4.596788] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
  110. [ 4.615712] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  111. [ 4.624003] Freeing unused kernel memory: 184K
  112. [ 4.628591] This architecture does not have kernel memory protection.
  113. [ 5.294665] init: Console is alive
  114. [ 5.298440] init: - watchdog -
  115. [ 5.474680] random: crng init done
  116. [ 6.315014] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  117. [ 6.384221] usbcore: registered new interface driver usbfs
  118. [ 6.389955] usbcore: registered new interface driver hub
  119. [ 6.395602] usbcore: registered new device driver usb
  120. [ 6.406598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  121. [ 6.415171] ehci-platform: EHCI generic platform driver
  122. [ 6.420659] ehci-platform ehci-platform: EHCI Host Controller
  123. [ 6.426686] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  124. [ 6.436957] ehci-platform ehci-platform: TX-TX IDP fix enabled
  125. [ 6.443025] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  126. [ 6.471047] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  127. [ 6.478350] hub 1-0:1.0: USB hub found
  128. [ 6.482729] hub 1-0:1.0: 1 port detected
  129. [ 6.489993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  130. [ 6.498178] ohci-platform: OHCI generic platform driver
  131. [ 6.504430] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  132. [ 6.522398] init: - preinit -
  133. [ 7.318397] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  134. [ 8.342658] eth0: link up (1000Mbps/Full duplex)
  135. [ 8.347643] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  136. [ 11.580938] UBIFS (ubi0:2): default file-system created
  137. [ 11.587895] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 465
  138. [ 11.720016] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  139. [ 11.728162] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  140. [ 11.738421] UBIFS (ubi0:2): FS size: 116690944 bytes (111 MiB, 919 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
  141. [ 11.749390] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  142. [ 11.756240] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 5157E100-2278-40F5-B173-1BF189E4CEEF, small LPT model
  143. [ 11.770821] mount_root: overlay filesystem has not been fully initialized yet
  144. [ 11.778777] mount_root: switching to ubifs overlay
  145. [ 11.814457] urandom-seed: Seed file not found (/etc/urandom.seed)
  146. [ 12.016649] eth0: link down
  147. [ 12.033024] procd: - early -
  148. [ 12.036115] procd: - watchdog -
  149. [ 12.691152] procd: - watchdog -
  150. [ 12.694753] procd: - ubus -
  151. [ 12.819348] procd: - init -
  152. [ 13.616500] kmodloader: loading kernel modules from /etc/modules.d/*
  153. [ 13.748126] ip6_tables: (C) 2000-2006 Netfilter Core Team
  154. [ 13.776192] Loading modules backported from Linux version v5.4-rc8-0-gaf42d3466bdc
  155. [ 13.784073] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51
  156. [ 13.813819] ip_tables: (C) 2000-2006 Netfilter Core Team
  157. [ 13.840686] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  158. [ 13.974973] xt_time: kernel timezone is -0000
  159. [ 13.983337] urngd: v1.0.2 started.
  160. [ 14.123981] PPP generic driver version 2.4.2
  161. [ 14.142144] NET: Registered protocol family 24
  162. [ 14.221800] kmodloader: done loading kernel modules from /etc/modules.d/*
  163. [ 39.402950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  164. [ 39.425541] br-lan: port 1(eth0.1) entered blocking state
  165. [ 39.431184] br-lan: port 1(eth0.1) entered disabled state
  166. [ 39.437083] device eth0.1 entered promiscuous mode
  167. [ 39.442088] device eth0 entered promiscuous mode
  168. [ 39.543104] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  169. [ 39.719135] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  170. [ 39.758341] br-lan: port 2(eth1.1) entered blocking state
  171. [ 39.763983] br-lan: port 2(eth1.1) entered disabled state
  172. [ 39.769893] device eth1.1 entered promiscuous mode
  173. [ 39.774899] device eth1 entered promiscuous mode
  174. [ 39.858726] IPv6: ADDRCONF(NETDEV_UP): eth0.3: link is not ready
  175. [ 39.890480] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  176. [ 40.423918] eth0: link up (1000Mbps/Full duplex)
  177. [ 40.428890] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  178. [ 40.551163] br-lan: port 1(eth0.1) entered blocking state
  179. [ 40.556778] br-lan: port 1(eth0.1) entered forwarding state
  180. [ 40.562888] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
  181. [ 40.569768] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.3: link becomes ready
  182. [ 40.801136] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement