Linux Slackware 7.1 on Compaq Prosignia VS 486 boot log:

Linux Slackware 7.1 on Compaq Prosignia VS 486 boot log:

Linux version 2.2.16 (root@bigkitty) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #69 Fri Jun 16 18:38:33 PDT 2000
Console: colour VGA+ 80x25
Calibrating delay loop... 16.59 BogoMIPS
Memory: 14096k/16384k available (1336k kernel code, 416k reserved, 472k data, 64k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: 486
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: No PCI bus detected
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 16384 bhash 16384)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 512 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
sim710: Configuring Sim710 (SCSI-ID 7) at 8000, IRQ 14
scsi0: Revision 0x2
scsi0 : Simple 53c710
scsi : 1 host.
  Vendor: IBM       Model: DDRS-34560W       Rev: S97B
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 2, lun 0
scsi : detected 1 SCSI generic 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8813870 [4303 MB] [4.3 GB]
Partition check:
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
INIT: version 2.78 booting
Uhhuh. NMI received. Dazed and confused, but trying to continue
You probably have a hardware problem with your RAM chips
Adding Swap: 393552k swap-space (priority -1)
/etc/rc.d/rc.S: Testing filesystem status: Read-only file system
Parallelizing fsck version 1.18 (11-Nov-1999)
/dev/sda5: clean, 23979/829504 files, 133674/829347 blocks
Remounting root device with read-write enabled.
/dev/sda5 on / type ext2 (rw)
/dev/sda1 on /msdos type vfat (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
none on /proc type proc (rw)
Setting system time from hardware clock...
Module dependencies up to date (no new kernel modules found).
/lib/modules/2.2.16/misc/parport_pc.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.16/misc/parport_pc.o: insmod /lib/modules/2.2.16/misc/parport_pc.o failed
/lib/modules/2.2.16/misc/parport_pc.o: insmod parport_pc failed
lp: no devices found
/lib/modules/2.2.16/misc/lp.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.16/misc/lp.o: insmod /lib/modules/2.2.16/misc/lp.o failed
/lib/modules/2.2.16/misc/lp.o: insmod lp failed
CSLIP: code copyright 1989 Regents of the University of California
SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
SLIP linefill/keepalive option.
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
PPP BSD Compression module registered
lance.c: Module autoprobing not allowed. Append "io=0xNNN" value(s).
/lib/modules/2.2.16/net/lance.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.16/net/lance.o: insmod /lib/modules/2.2.16/net/lance.o failed
/lib/modules/2.2.16/net/lance.o: insmod lance failed
/lib/modules/2.2.16/net/pcnet32.o: init_module: Device or resource busy
Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.2.16/net/pcnet32.o: insmod /lib/modules/2.2.16/net/pcnet32.o failed
/lib/modules/2.2.16/net/pcnet32.o: insmod pcnet32 failed
Using /etc/random-seed to initialize /dev/urandom...
INIT: Entering runlevel: 3
Going multiuser...