2018-09-11 12:52:43  ★ Vincent DeLuca puts his bag on the floor after unslinging it from his shoulder.

2018-09-11 12:52:58  ★ Vincent DeLuca kneels down and opens it, taking out a small box containing the new ignition switch

2018-09-11 12:53:16  ★ along with a few tools, mainly a socket wrench and a screwdriver.      ((Vincent DeLuca))

2018-09-11 12:54:05  ★ Vincent DeLuca opens the driver door and pulls the hood unlock handle to unlock the hood.

2018-09-11 12:54:21  ★ Vincent DeLuca pops the hood open and raises it up before applying the hood prop.

2018-09-11 12:54:44  ★ Vincent DeLuca uses his screwdriver to loosen the screws on the clamps of the battery terminals

2018-09-11 12:54:52  ★ before removing them both to disconnect the battery.      ((Vincent DeLuca))

2018-09-11 12:55:35  ★ Vincent DeLuca jumps in the driver seat as he grasps firmly on the horn pad, shaking it and pulling back

2018-09-11 12:55:40  ★ at the same time, removing it.      ((Vincent DeLuca))

2018-09-11 12:55:55  ★ Vincent DeLuca locates the wire behind the horn pad and disconnects it.

2018-09-11 12:56:45  ★ Vincent DeLuca removes the rubber cylinder boot from the adapter before loosening the nut from the column

2018-09-11 12:56:53  ★ assembly's center.      ((Vincent DeLuca))

2018-09-11 12:57:11  ★ Vincent DeLuca grasps onto the steering wheel and pulls it out, resting it on the passenger seat.

2018-09-11 12:57:39  ★ Vincent DeLuca grabs ahold of his screwdriver and undoes the three screws from the stalk before

2018-09-11 12:57:51  ★ undoing the plastic housing, removing it and putting it aside.      ((Vincent DeLuca))

2018-09-11 12:58:26  ★ Vincent DeLuca pulls out the two stalks at the same time carefully.

2018-09-11 12:58:57  ★ Vincent DeLuca removes the plastic collar from the column after using his screwdriver to pry it off.

2018-09-11 12:59:23  ★ Vincent DeLuca puts it aside and loosens the bolt from the left side from the bottom of the dashboard.

2018-09-11 12:59:45  ★ Vincent DeLuca slides out the ignition switch assembly and unplugs the wires from its back.

2018-09-11 13:00:13  ★ Vincent DeLuca reaches out for the box as he opens it and takes out the new ignition switch, inserting it

2018-09-11 13:00:23  ★ in place after plugging the wires in its back.      ((Vincent DeLuca))

2018-09-11 13:01:07  ★ Vincent DeLuca puts the bolt in the left side of the bottom of the dashboard and secures it before position

2018-09-11 13:01:23  ★ -ing the plastic collar back on the collumn.      ((Vincent DeLuca))

2018-09-11 13:01:41  ★ Vincent DeLuca puts both stalks back and uses his screwdriver to secure the three screws.

2018-09-11 13:02:10  ★ Vincent DeLuca reaches out for the removed steering wheel, carefully placing it back in place.

2018-09-11 13:02:26  ★ Vincent DeLuca puts the nut back in the center of the steering column and uses his socket wrench to

2018-09-11 13:02:38  ★ secure it prior to applying the rubber cylinder boot.      ((Vincent DeLuca))

2018-09-11 13:02:51  ★ Vincent DeLuca plugs the wire back in the horn pad and secures it in place before removing a pair of

2018-09-11 13:03:00  ★ keys from the box of the new ignition switch.      ((Vincent DeLuca))

2018-09-11 13:03:17  ★ Vincent DeLuca jumps out of the car and heads to the hood as he connects both of the battery's terminals

2018-09-11 13:03:18  ★ back on.      ((Vincent DeLuca))

2018-09-11 13:03:56  ★ Vincent DeLuca unapplies the hood tie prop rod and slams the hood closed before collecting all of the tools

2018-09-11 13:03:59  ★ back in the bag.      ((Vincent DeLuca))