API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 2nd, 2019
150
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 242.54 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Samsung S-Boot 4.0 for SM-T310 (Feb 16 2017 - 16:22:56)
  3.  
  4. EXYNOS4212(EVT 1.0) / 2044MB / 0MB / Rev 6 / T310XXSBQB5 /(PKG_ID 0x500f028)
  5.  
  6. BOOTLOADER VERSION : T310XXSBQB5
  7.  
  8. PMIC rev = PASS2(4)
  9. CHECK PWROFFSRC = 0x00
  10. CHECK RTC PWROFFSRC = 0x70
  11. [s5m8767] update LDO2 onoff[1]
  12. [s5m8767] update LDO4 onoff[1]
  13. [s5m8767] update LDO5 onoff[0]
  14. [s5m8767] update LDO6 onoff[1]
  15. [s5m8767] update LDO7 onoff[1]
  16. [s5m8767] update LDO8 onoff[1]
  17. [s5m8767] update LDO9 vol[1800]
  18. [s5m8767] update LDO10 onoff[1]
  19. [s5m8767] update LDO11 vol[1950], onoff[1]
  20. [s5m8767] update LDO12 onoff[1]
  21. [s5m8767] update LDO13 onoff[0]
  22. [s5m8767] update LDO14 vol[1950], onoff[1]
  23. [s5m8767] update LDO15 onoff[1]
  24. [s5m8767] update LDO16 onoff[1]
  25. [s5m8767] update LDO19 vol[1900]
  26. [s5m8767] update LDO20 vol[3300]
  27. [s5m8767] update LDO21 vol[3300]
  28. [s5m8767] update LDO22 vol[2800]
  29. [s5m8767] update LDO27 vol[1500]
  30. cardtype: 0x00000007
  31. SB_MMC_HS_52MHZ_1_8V_3V_IO
  32. mmc->card_caps: 0x00000311
  33. mmc->host_caps: 0x00000311
  34. [mmc] capacity = 30777344
  35. Current SBOOT version : VERSION_-+A1
  36. - read_bl1
  37. pit_check_signature (PIT) valid.
  38. initialize_ddi_data: usable! (7:0xe)
  39. [RPMB] emmc_rpmb_open:
  40. Get DATA success.
  41.  
  42. [RPMB] emmc_rpmb_close:
  43. initialize_rpmb_data: usable! (SM-T310:VERSION_-+A1)
  44. PARAM ENV VERSION: v1.0..
  45. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  46. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  47. set_charger_state: buck(1), chg(1), reg(0x05)
  48. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  49. set_auto_current: ta_state(1), curr(1800)
  50. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  51. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  52. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  53. set_charger_state: buck(1), chg(1), reg(0x05)
  54. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  55. set_auto_current: ta_state(1), curr(1800)
  56. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  57. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  58. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  59. set_charger_state: buck(1), chg(0), reg(0x04)
  60. init_fuelgauge: Start!!
  61. check_battery_type: ADC of the BATT_ID(729)
  62. check_battery_type: BATTERY TYPE(0)
  63. init_fuelgauge: Battery type : SDI
  64. init_fuelgauge: FG Capacity(0x21f6), LearnCFG(0x77), CGain(0x3fa1)
  65. get_CGAIN: CGain = 0x3fa1
  66. init_fuelgauge: Already initialized (0x21f6, SDI type)
  67. fuel_gauge_read_vfsoc: VFSOC(0), data(0x0000)
  68. fuel_gauge_read_soc: SOC(0), data(0x0015)
  69. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  70. fuel_gauge_compensate_soc: Start!!
  71. fuel_gauge_read_soc: SOC(0), data(0x0015)
  72. fuel_gauge_read_vcell: VCELL(2975), data(0x94c2)
  73. calculate_table_soc: Get table SOC in case of charging!!
  74. calculate_table_soc: i(9), vcell(2975), table_soc(0)
  75. differ(0), table_soc(0), RepSOC(0)
  76. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  77. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  78. set_charger_state: buck(1), chg(1), reg(0x05)
  79. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  80. set_auto_current: ta_state(1), curr(1800)
  81. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  82. init_microusb_ic: before MUIC: CDETCTRL:0x2d
  83. init_microusb_ic: after MUIC: CDETCTRL:0x2d
  84. init_microusb_ic: MUIC: CONTROL1:0x00
  85. init_microusb_ic: MUIC: CONTROL1:0x00
  86. init_microusb_ic: MUIC: CONTROL2:0x3b
  87. init_microusb_ic: MUIC: CONTROL2:0x3b
  88. ====================
  89. s5m8767 pmic register
  90. ====================
  91. ID = 0x05
  92. ONSRC = 0x04
  93. STATUS1 = 0x00
  94. STATUS2 = 0x16
  95. STATUS3 = 0x07
  96. IRQ1 = 0x00
  97. IRQ2 = 0x3a
  98. IRQ3 = 0x00
  99. PWROFFSRC = 0x70
  100. PMIC_RTC_WTSR_SMPL_REG = 0x00
  101. S5M8767_REG_BUCHG = 0x6f
  102. s5p_check_keypad: 0x0
  103. s5p_check_reboot_mode: INFORM3 = 0 ... skip
  104. s5p_check_upload: MAGIC(0xc0c0c0c0), RST_STAT(0x10000)
  105. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  106. s5p_check_download: 0
  107. mach_board_main: recovery set!(0x80000)
  108. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  109. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  110. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  111. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  112. set_charger_state: buck(1), chg(1), reg(0x05)
  113. check_pm_status: charger boot, waiting 500ms and check again
  114. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  115. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  116. check_pm_status: charger is ok, LPM boot
  117. AST_POWERON..
  118. scr_draw_image: draw 'logo.jpg'...
  119. read 'logo.jpg'(55175) completed.
  120. cmu_div:10, div:1, src_clk:800000000, pixel_clk:72161280
  121. s5p_dsim_display_config: VIDEO MODE
  122. 5E, 8C, 10,
  123. BL_ID : 3
  124. <start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
  125. <start_checksum:483>offset:50, size:6296
  126. <start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:25
  127. Not Need Movinand Checksum
  128. Movinand Checksum Confirmation Pass
  129. [mobi_drv] add: 0x43e51c40, size: 3933
  130. MobiCore INIT response = 0
  131. MobiCore RTM has initialized!
  132. MobiCore IDLE flag = 0
  133. MobiCore driver address 43e51c40, size = 3933
  134. MobiCore RTM Notified back!
  135. MobiCore Driver loaded and RTM IDLE!
  136. MobiCore RTM has been uninitialized!
  137. Set debug level to low(4f4c)
  138. load_kernel: loading boot image from 163840..
  139. Verify_Binary_Signature: failed.
  140. pit_check_signature (RECOVERY) invalid.
  141. Set invalid sign flag
  142. No need to update kernel type.
  143.  
  144. SMC Num = 0x83000001
  145.  
  146. mobismc success!!! [ret = 0]
  147. [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A1, rpmb_version:VERSION_-+A1
  148. rpmb_version:49, cur_version:49
  149. DDI value :0x0000000e
  150. [MMC] Set write protection (boot partition)
  151. ATAG_CORE: 5 54410001 0 0 0
  152. ATAG_MEM: 4 54410002 20000000 40000000
  153. ATAG_MEM: 4 54410002 1FC00000 60000000
  154. ATAG_MEM: 4 54410002 20000000 80000000
  155. ATAG_MEM: 4 54410002 20000000 A0000000
  156. ATAG_SERIAL: 4 54410006 430035c8 b06b60bd
  157. ATAG_INITRD2: 4 54420005 42000000 376ea5
  158. ATAG_REVISION: 3 54410007 6
  159. ATAG_CMDLINE: ab 54410009 'console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 sysscope=0xee000000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=0bc9e41feecd0a01230f66f1fdc80e49 connie=SM-T310_OPEN_EUR_daec14058ffc2ccd4d22f48a17ee444a androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000'
  160. ATAG_NONE: 0 0
  161.  
  162. Starting kernel at 0x40008000...
  163.  
  164. SWITCH_SEL(3)
  165. <6>[ 0.000000] c0 Initializing cgroup subsys cpu
  166. <5>[ 0.000000] c0 Linux version 3.0.31-kerNoleCM14.1+ (dave@noletude) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Fri Jun 2 09:49:02 EDT 2017
  167. <4>[ 0.000000] c0 CPU: ARMv7 Processor [412fc098] revision 8 (ARMv7), cr=10c5387d
  168. <4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  169. <4>[ 0.000000] c0 Machine: SMDK4x12
  170. <3>[ 0.000000] c0 exynos_page_hole_area_reserve: Reserved 0x80000000 ~ 0xc0000000 for marking page holes
  171. <6>[ 0.000000] c0 cma: CMA: reserved 8 MiB at 65800000
  172. <6>[ 0.000000] c0 cma: CMA: reserved 40 MiB at 58800000
  173. <6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 70000000
  174. <6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
  175. <4>[ 0.000000] c0 CPU EXYNOS4212 (id 0x43220210)
  176. <7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
  177. <6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
  178. <3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
  179. <3>[ 0.000000] c0 audiocdclk: no parent clock specified
  180. <3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
  181. <7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
  182. <7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
  183. <6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
  184. <6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
  185. <6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
  186. <6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
  187. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  188. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  189. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  190. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  191. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  192. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  193. <6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
  194. <6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
  195. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  196. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  197. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  198. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  199. <6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 72727272
  200. <6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
  201. <6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 72727272
  202. <6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
  203. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  204. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  205. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
  206. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
  207. <6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
  208. <6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
  209. <6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
  210. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6f700000/0x00800000 for 'fimd'
  211. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dd00000/0x01a00000 for 'fimc0'
  212. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dc00000/0x00100000 for 'srp'
  213. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x60800000/0x00400000 for 'mfc-normal'
  214. <6>[ 0.000000] c0 S5P/CMA: Reserving 0x8700000 for secure region aligned by 0x8000000.
  215. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58000000/0x00100000 for 'sectbl'
  216. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58100000/0x03100000 for 'mfc-secure'
  217. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x5b200000/0x05500000 for 'ion'
  218. <0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
  219. <0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
  220. <7>[ 0.000000] c0 On node 0 totalpages: 523264
  221. <7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0b1c700, node_mem_map c0f5e000
  222. <7>[ 0.000000] c0 Normal zone: 1568 pages used for memmap
  223. <7>[ 0.000000] c0 Normal zone: 0 pages reserved
  224. <7>[ 0.000000] c0 Normal zone: 199136 pages, LIFO batch:31
  225. <7>[ 0.000000] c0 HighMem zone: 2528 pages used for memmap
  226. <7>[ 0.000000] c0 HighMem zone: 320032 pages, LIFO batch:31
  227. <6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
  228. <6>[ 0.000000] c0 PERCPU: Embedded 7 pages/cpu @c1f76000 s7936 r8192 d12544 u32768
  229. <7>[ 0.000000] c0 pcpu-alloc: s7936 r8192 d12544 u32768 alloc=8*4096
  230. <7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
  231. <6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 519168
  232. <5>[ 0.000000] c0 Kernel command line: console=ttySAC3,115200 consoleblank=0 androidboot.hardware=smdk4x12 androidboot.selinux=permissive console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 sysscope=0xee000000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=0bc9e41feecd0a01230f66f1fdc80e49 connie=SM-T310_OPEN_EUR_daec14058ffc2ccd4d22f48a17ee444a androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000
  233. <6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:1933 sec_log_buf:fd200000 sec_log_size:2097152
  234. <6>[ 0.000000] c0 sec_log_save_old: saved old log at 6451@c1f85160
  235. <6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
  236. <6>[ 0.000000] c0 tima :sec_tima_log_setup, base:46202000, size:200000
  237. <6>[ 0.000000] c0 sec_avc_log_setup: *sec_avc_log_ptr:c0c0c0c0 sec_avc_log_buf:c6404000 sec_log_size:0x40000
  238. <6>[ 0.000000] c0 sec_avc_log_setup: no old log found
  239. <6>[ 0.000000] c0 get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:4
  240. <6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  241. <6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  242. <6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  243. <6>[ 0.000000] c0 Memory: 1020MB 1024MB = 2044MB total
  244. <5>[ 0.000000] c0 Memory: 1324900k/1324900k available, 768156k reserved, 765952K highmem
  245. <5>[ 0.000000] c0 Virtual kernel memory layout:
  246. <5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  247. <5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  248. <5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
  249. <5>[ 0.000000] c0 vmalloc : 0xf1800000 - 0xfc000000 ( 168 MB)
  250. <5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xf1000000 ( 784 MB)
  251. <5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  252. <5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  253. <5>[ 0.000000] c0 .init : 0xc0008000 - 0xc0049000 ( 260 kB)
  254. <5>[ 0.000000] c0 .text : 0xc0049000 - 0xc099c000 (9548 kB)
  255. <5>[ 0.000000] c0 .data : 0xc099c000 - 0xc0b32050 (1625 kB)
  256. <5>[ 0.000000] c0 .bss : 0xc0b32074 - 0xc0f5da00 (4271 kB)
  257. <6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  258. <6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
  259. <6>[ 0.000000] c0 NR_IRQS:501
  260. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  261. <6>[ 0.000000] c0 Console: colour dummy device 80x30
  262. <6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
  263. <6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
  264. <6>[ 0.000000] c0 Security Framework initialized
  265. <6>[ 0.000000] c0 SELinux: Initializing.
  266. <7>[ 0.000000] c0 SELinux: Starting in permissive mode
  267. <6>[ 0.000000] c0 Mount-cache hash table entries: 512
  268. <6>[ 0.000000] c0 Initializing cgroup subsys debug
  269. <6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
  270. <6>[ 0.000000] c0 Initializing cgroup subsys freezer
  271. <6>[ 0.000000] c0 Initializing cgroup subsys bfqio
  272. <6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
  273. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  274. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  275. <6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  276. <6>[ 0.000000] c0 L310 cache controller enabled
  277. <6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c7, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  278. <4>[ 0.030000] c1 CPU1: Booted secondary processor
  279. <6>[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
  280. <6>[ 0.040000] c0 Brought up 2 CPUs
  281. <6>[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
  282. <3>[ 0.045000] c0 gpio: GPK0 has missing PM functions
  283. <6>[ 0.050000] c0 print_constraints: dummy:
  284. <6>[ 0.050000] c0 NET: Registered protocol family 16
  285. <7>[ 0.050000] c0 migrating range 70000 70280, retry (0)
  286. <6>[ 0.075000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
  287. <6>[ 0.080000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
  288. <6>[ 0.080000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
  289. <7>[ 0.085000] c0 midas_config_gpio_table
  290. <6>[ 0.085000] c0 midas_power_init
  291. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] state : init
  292. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] --
  293. <6>[ 0.085000] c0 [gpio_dvs_check_initgpio] !!!
  294. <6>[ 0.085000] c0 [TSP] midas_tsp_init() is called
  295. <6>[ 0.085000] c0 Registered chained gpio int handler for interrupt 111.
  296. <6>[ 0.085000] c0 Registered interrupt support for gpio group 2.
  297. <6>[ 0.085000] c0 tab3_tsp_init touch irq : 388 (6)
  298. <6>[ 0.085000] c0 TSP ID : 0
  299. <6>[ 0.085000] c0 touch panel : 0
  300. <6>[ 0.085000] c0 Sound: start midas_sound_init
  301. <6>[ 0.085000] c0 midas_machine_init() register sii9234 driver
  302. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=0
  303. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init tune_mask=0x3800, tune=0x2800
  304. <6>[ 0.085000] c0 exynos_slim8_charger_init: tab3 charger init
  305. <4>[ 0.085000] c0 brcm_wlan_init: start
  306. <4>[ 0.085000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
  307. <4>[ 0.085000] c0 -----------------------------------------------------
  308. <4>[ 0.085000] c0 -----------------------------------------------------
  309. <4>[ 0.085000] c0 -----------------------------------------------------
  310. <4>[ 0.085000] c0 regist ret:0
  311. <6>[ 0.100000] c0 exynos4_exynos4212_mfd_init
  312. <3>[ 0.100000] c0 irda_device_init called!
  313. <6>[ 0.100000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  314. <6>[ 0.100000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  315. <6>[ 0.100000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
  316. <6>[ 0.100000] c0 exynos4_pmu_init: PMU supports 4212(104)
  317. <6>[ 0.100000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
  318. <6>[ 0.100000] c0 EXYNOS4: Initializing architecture
  319. <4>[ 0.100000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
  320. <6>[ 0.100000] c0 s3c-adc samsung-adc-v4: attached adc driver
  321. <6>[ 0.105000] c0 samsung-pd samsung-pd.0: power domain registered
  322. <6>[ 0.105000] c0 samsung-pd samsung-pd.1: power domain registered
  323. <6>[ 0.105000] c0 samsung-pd samsung-pd.2: power domain registered
  324. <6>[ 0.105000] c0 lcd0 disable skip only one time
  325. <6>[ 0.105000] c0 samsung-pd samsung-pd.5: power domain registered
  326. <6>[ 0.105000] c0 samsung-pd samsung-pd.4: power domain registered
  327. <6>[ 0.105000] c0 samsung-pd samsung-pd.6: power domain registered
  328. <6>[ 0.105000] c0 samsung-pd samsung-pd.7: power domain registered
  329. <6>[ 0.105000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
  330. <6>[ 0.105000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
  331. <6>[ 0.105000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
  332. <6>[ 0.105000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
  333. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
  334. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
  335. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
  336. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
  337. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
  338. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
  339. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
  340. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
  341. <6>[ 0.105000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
  342. <6>[ 0.145000] c0 bio: create slab <bio-0> at 0
  343. <6>[ 0.145000] c0 print_constraints: VBATT: 5000 mV
  344. <5>[ 0.145000] c0 SCSI subsystem initialized
  345. <6>[ 0.145000] c0 usbcore: registered new interface driver usbfs
  346. <6>[ 0.145000] c0 usbcore: registered new interface driver hub
  347. <6>[ 0.145000] c0 usbcore: registered new device driver usb
  348. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
  349. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
  350. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
  351. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
  352. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
  353. <6>[ 0.150000] c0 i2c-gpio i2c-gpio.24: using pins 284 (SDA) and 283 (SCL)
  354. <6>[ 0.150000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0
  355. <6>[ 0.225000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe
  356. <6>[ 0.225000] c0 print_constraints: safeout1 range: at 4900 mV
  357. <6>[ 0.225000] c0 print_constraints: safeout2 range: at 4900 mV
  358. <6>[ 0.230000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 1800 mA
  359. <6>[ 0.230000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)
  360. <6>[ 0.230000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  361. <6>[ 0.230000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  362. <6>[ 0.230000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  363. <6>[ 0.230000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
  364. <6>[ 0.230000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
  365. <3>[ 0.230000] c0 s3c-i2c s3c2440-i2c.6: no platform data
  366. <4>[ 0.230000] c0 s3c-i2c: probe of s3c2440-i2c.6 failed with error -22
  367. <7>[ 0.235000] c0 s5m8767_pmic_probe: PMIC DEVICE ID=> 0x5
  368. <6>[ 0.245000] c0 print_constraints: vdd_mif range: 850 <--> 1100 mV at 1000 mV
  369. <6>[ 0.245000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
  370. <6>[ 0.245000] c0 print_constraints: vdd_int range: 850 <--> 1300 mV at 1000 mV
  371. <6>[ 0.245000] c0 print_constraints: vdd_g3d range: 850 <--> 1150 mV at 1000 mV
  372. <6>[ 0.250000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
  373. <6>[ 0.250000] c0 print_constraints: VCC_1.8V_AP: 1800 mV
  374. <6>[ 0.250000] c0 print_constraints: VCC_3.3V_MHL: 3300 mV
  375. <6>[ 0.255000] c0 print_constraints: VMIPI_1.0V: 1000 mV
  376. <6>[ 0.255000] c0 print_constraints: VSIL_1.2V: 1200 mV
  377. <6>[ 0.255000] c0 print_constraints: VMIPI_1.8V: 1800 mV
  378. <6>[ 0.260000] c0 print_constraints: VCC_1.8V_MHL: 1800 mV
  379. <6>[ 0.260000] c0 print_constraints: VLED_IC_1.9V: 1900 mV
  380. <6>[ 0.260000] c0 print_constraints: VTOUCH_3.3V: 3300 mV
  381. <6>[ 0.265000] c0 print_constraints: TSP_VDD_3.3V: 3300 mV
  382. <6>[ 0.265000] c0 print_constraints: 5M_AF_2.8V: 2800 mV
  383. <6>[ 0.265000] c0 print_constraints: VTF_2.8V: 2800 mV
  384. <6>[ 0.270000] c0 print_constraints: LEDA_2.8V: 2800 mV
  385. <6>[ 0.270000] c0 print_constraints: TSP_VDD_1.8V: 1800 mV
  386. <6>[ 0.270000] c0 print_constraints: CAM_IO_1.8V: 1800 mV
  387. <6>[ 0.270000] c0 print_constraints: VTCAM_1.8V: 1800 mV
  388. <6>[ 0.270000] c0 s5m87xx 7-0066: S5M87xx MFD probe done!!!
  389. <6>[ 0.275000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  390. <6>[ 0.275000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
  391. <6>[ 0.275000] c0 Bluetooth: Core ver 2.16
  392. <6>[ 0.275000] c0 NET: Registered protocol family 31
  393. <6>[ 0.275000] c0 Bluetooth: HCI device and connection manager initialized
  394. <6>[ 0.275000] c0 Bluetooth: HCI socket layer initialized
  395. <6>[ 0.275000] c0 Bluetooth: L2CAP socket layer initialized
  396. <6>[ 0.275000] c0 Bluetooth: SCO socket layer initialized
  397. <6>[ 0.275000] c0 cfg80211: Calling CRDA to update world regulatory domain
  398. <6>[ 0.275000] c0 Switching to clocksource mct-frc
  399. <6>[ 0.276299] c0 Switched to NOHz mode on CPU #0
  400. <6>[ 0.276729] c1 Switched to NOHz mode on CPU #1
  401. <6>[ 0.311574] c0 NET: Registered protocol family 2
  402. <6>[ 0.311860] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  403. <6>[ 0.312854] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  404. <6>[ 0.314808] c0 TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  405. <6>[ 0.318070] c0 TCP: Hash tables configured (established 131072 bind 65536)
  406. <6>[ 0.318112] c0 TCP reno registered
  407. <6>[ 0.318150] c0 UDP hash table entries: 512 (order: 3, 32768 bytes)
  408. <6>[ 0.318259] c0 UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  409. <6>[ 0.318860] c0 NET: Registered protocol family 1
  410. <6>[ 0.319178] c0 Trying to unpack rootfs image as initramfs...
  411. <6>[ 2.680812] c0 Freeing initrd memory: 3544K
  412. <6>[ 2.680969] c0 PMU: registered new PMU device of type 0
  413. <6>[ 2.681401] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  414. <6>[ 2.681644] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  415. <6>[ 2.681791] c0 Exynos4 : ARM Clock down on idle mode is enabled
  416. <6>[ 2.683366] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
  417. <6>[ 2.683619] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
  418. <6>[ 2.683868] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
  419. <6>[ 2.684128] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
  420. <6>[ 2.684379] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
  421. <6>[ 2.684416] c0 accel_gpio_init
  422. <6>[ 2.684655] c0 i2c 1-0019: i2c_add_devices - added k3dh successfully
  423. <6>[ 2.684920] c0 i2c 9-0010: i2c_add_devices - added cm3323 successfully
  424. <6>[ 2.685215] c0 i2c 10-002e: i2c_add_devices - added yas532 successfully
  425. <6>[ 2.686318] c0 wake enabled for irq 374
  426. <6>[ 2.686617] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  427. <7>[ 2.687882] c0 migrating range 70280 70281, retry (0)
  428. <6>[ 2.704326] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
  429. <6>[ 2.704364] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  430. <7>[ 2.704616] c0 migrating range 70281 70282, retry (0)
  431. <6>[ 2.720139] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
  432. <6>[ 2.720174] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  433. <7>[ 2.720423] c0 migrating range 70282 70283, retry (0)
  434. <6>[ 2.735840] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
  435. <6>[ 2.735876] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  436. <6>[ 2.736728] c0 audit: initializing netlink socket (enabled)
  437. <4>[ 2.746207] c0 highmem bounce pool size: 64 pages
  438. <6>[ 2.746725] c0 ashmem: initialized
  439. <6>[ 2.767058] c0 exFAT: Core Version 1.2.9
  440. <6>[ 2.767086] c0 exFAT: FS Version 1.2.9
  441. <6>[ 2.769708] c0 Registering sdcardfs 0.1
  442. <6>[ 2.770175] c0 fuse init (API version 7.16)
  443. <6>[ 2.771697] c0 msgmni has been set to 1226
  444. <7>[ 2.771850] c0 SELinux: Registering netfilter hooks
  445. <6>[ 2.772539] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  446. <6>[ 2.772776] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  447. <6>[ 2.772984] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  448. <6>[ 2.773197] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  449. <6>[ 2.773400] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  450. <6>[ 2.773597] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  451. <6>[ 2.773799] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  452. <6>[ 2.774006] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  453. <6>[ 2.774333] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  454. <6>[ 2.774565] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  455. <6>[ 2.774814] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  456. <6>[ 2.775619] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  457. <6>[ 2.775852] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  458. <6>[ 2.776061] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  459. <6>[ 2.776105] c0 FIPS: No test for stdrng (krng)
  460. <6>[ 2.776187] c0 io scheduler noop registered (default)
  461. <6>[ 2.776218] c0 io scheduler deadline registered
  462. <6>[ 2.776246] c0 io scheduler row registered
  463. <6>[ 2.776395] c0 io scheduler cfq registered
  464. <6>[ 2.776872] c0 io scheduler bfq registered
  465. <6>[ 2.776897] c0 BFQ I/O-scheduler: v7r8
  466. <6>[ 2.776921] c0 io scheduler sio registered
  467. <6>[ 2.776946] c0 io scheduler vr registered
  468. <6>[ 2.776970] c0 start plist test
  469. <6>[ 2.782967] c0 end plist test
  470. <6>[ 2.785722] c0 s3cfb s3cfb.0: src_clk=800000000, vclk=72161280, div=11(10), rate=79999999
  471. <6>[ 2.785885] c0 set mdnie_pwm sclk rate to 2181818
  472. <6>[ 2.785914] c0 set mdnie_pwm sclk rate to 12000000
  473. <6>[ 2.785948] c0 s3cfb s3cfb.0: fimd sclk rate 72727272, clkdiv 0xff1baa
  474. <6>[ 2.786112] c0 s3cfb s3cfb.0: fifo underrun trace
  475. <6>[ 2.786396] c0 s3cfb s3cfb.0: [fb0] win2: dma: 0x6f700000, cpu: 0xf20c9000, size: 0x007d0000
  476. <6>[ 2.791935] c0 sec_getlog_supply_fbinfo: 0x6f700000 800 1280 32 2
  477. <6>[ 2.799788] c0 Bootloader sent 'bootloaderfb' : 5EC00000
  478. <6>[ 2.801240] c0 s3cfb s3cfb.0: parent clock: 72727272, vclk: 72165000, vclk div: 1
  479. <6>[ 2.801428] c0 s3cfb s3cfb.0: registered successfully
  480. <6>[ 2.802402] c0 mdnie mdnie: lcdtype: 1
  481. <6>[ 2.802444] c0 mdnie mdnie: standard_ui
  482. <6>[ 2.802468] c0 mdnie mdnie: registered successfully
  483. <6>[ 2.802741] c0 s5p_dsim_mipi_power_control: enable=1
  484. <6>[ 2.803848] c0 lcd_power_on: enable=1
  485. <6>[ 2.818312] c0 s5p-dsim s5p-dsim.0: rxhd : 2005e11
  486. <6>[ 2.835436] c0 s5p-dsim s5p-dsim.0: rxhd : 3e008c11
  487. <6>[ 2.852537] c0 s5p-dsim s5p-dsim.0: rxhd : 32001011
  488. <6>[ 2.852695] c0 lcd panel: ID: 5e, 8c, 10
  489. <6>[ 2.852721] c0 lcd panel: s6d7aa0 lcd panel driver has been probed.
  490. <6>[ 2.852769] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed
  491. <6>[ 2.853425] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  492. <6>[ 3.150460] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
  493. <6>[ 3.230125] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
  494. <6>[ 3.310112] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
  495. <6>[ 3.390112] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
  496. <6>[ 3.439766] c0 console [ttySAC3] enabled
  497. <4>[ 3.495555] c0 Mali: :::exynos_result_of_asv : 0
  498. <4>[ 3.495586] c0 Mali: mali_dvfs[0].vol = 950000
  499. <4>[ 3.495616] c0 Mali: :::exynos_result_of_asv : 0
  500. <4>[ 3.495644] c0 Mali: mali_dvfs[1].vol = 975000
  501. <4>[ 3.495673] c0 Mali: mali_runtime_resume.vol = 975000
  502. <4>[ 3.495703] c0 Mali: :::exynos_result_of_asv : 0
  503. <4>[ 3.495732] c0 Mali: mali_dvfs[2].vol = 1025000
  504. <4>[ 3.495761] c0 Mali: :::exynos_result_of_asv : 0
  505. <4>[ 3.495789] c0 Mali: mali_dvfs[3].vol = 1100000
  506. <4>[ 3.495819] c0 Mali: init_gpu_vol = 1100000
  507. <4>[ 3.496233] c0 Mali: init_mali_clock mali_clock c0a91ab0
  508. <7>[ 3.499067] c0 migrating range 70300 70700, retry (0)
  509. <4>[ 3.528053] c0 Mali: Mali device driver loaded
  510. <4>[ 3.528495] c0 UMP: UMP device driver 0000 loaded
  511. <6>[ 3.528530] c0 func:max77693_muic_init
  512. <6>[ 3.528671] c0 func:max77693_muic_probe
  513. <6>[ 3.528705] c0 max77693-muic max77693-muic: adc:0 chgtype:0, adc1k:0
  514. <6>[ 3.528741] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART
  515. <6>[ 3.528783] c0 max77693_muic_probe: switch_sel: 3
  516. <6>[ 3.529196] c0 MUIC ret=0
  517. <6>[ 3.529221] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2
  518. <6>[ 3.530734] c0 max77693_muic_set_adcdbset: CNTL3: before:0x0 value:0x20 after:0x20
  519. <6>[ 3.532332] c0 max77693-muic:max77693_muic_init_regs CONTROL[1:0x0, 2:0x3b, 3:0x20]
  520. <6>[ 3.532376] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=6
  521. <6>[ 3.532936] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0
  522. <6>[ 3.533497] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0
  523. <6>[ 3.534057] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0
  524. <6>[ 3.543699] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445
  525. <6>[ 3.544264] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9
  526. <6>[ 3.544825] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11
  527. <6>[ 3.545472] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0
  528. <6>[ 3.546035] c0 max77693_set_jig_state: 0
  529. <6>[ 3.557064] c0 brd: module loaded
  530. <6>[ 3.562694] c0 loop: module loaded
  531. <6>[ 3.562745] c0 lkdtm: No crash points registered, enable through debugfs
  532. <6>[ 3.562898] c0 sec_jack_probe : Registering jack driver
  533. <6>[ 3.564157] c1 wake enabled for irq 356
  534. <6>[ 3.565353] c1 print_constraints: WM1811 LDO1: at 3000 mV
  535. <6>[ 3.565965] c1 print_constraints: WM1811 LDO2: at 1050 mV
  536. <6>[ 3.597916] c0 wm8994 4-001a: Succeeded to read ID register
  537. <6>[ 3.604815] c0 wm8994 4-001a: WM1811 revision D CUST_ID 01
  538. <4>[ 3.615172] c0 wm8994 4-001a: No interrupt specified, no interrupts
  539. <6>[ 3.617740] c0 PPP generic driver version 2.4.2
  540. <6>[ 3.618192] c0 PPP Deflate Compression module registered
  541. <6>[ 3.618224] c0 PPP BSD Compression module registered
  542. <6>[ 3.618735] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  543. <6>[ 3.618867] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  544. <6>[ 3.619221] c0 PPP MPPE Compression module registered
  545. <6>[ 3.619253] c0 NET: Registered protocol family 24
  546. <6>[ 3.619285] c0 tun: Universal TUN/TAP device driver, 1.6
  547. <6>[ 3.619315] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  548. <6>[ 3.619824] c0 host_notifier host_notifier.0: notifier_prove
  549. <6>[ 3.620672] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  550. <6>[ 3.620901] c0 s5p-ehci s5p-ehci: usb phy usage(2)
  551. <7>[ 3.621063] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  552. <6>[ 3.621104] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
  553. <6>[ 3.621429] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  554. <7>[ 3.621601] c0 migrating range 70283 70284, retry (0)
  555. <6>[ 3.639594] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
  556. <6>[ 3.645337] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  557. <6>[ 3.645463] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  558. <6>[ 3.645505] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  559. <6>[ 3.645545] c0 usb usb1: Product: S5P EHCI Host Controller
  560. <6>[ 3.645576] c0 usb usb1: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ehci_hcd
  561. <6>[ 3.645613] c0 usb usb1: SerialNumber: s5p-ehci
  562. <6>[ 3.646510] c0 hub 1-0:1.0: USB hub found
  563. <6>[ 3.646551] c0 hub 1-0:1.0: 3 ports detected
  564. <6>[ 3.647244] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  565. <6>[ 3.647457] c0 s5p-ohci s5p-ohci: usb phy usage(6)
  566. <3>[ 3.647488] c0 s5p-ohci s5p-ohci: Already power on PHY
  567. <7>[ 3.651192] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  568. <6>[ 3.651231] c0 s5p-ohci s5p-ohci: s5p OHCI
  569. <6>[ 3.651589] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  570. <7>[ 3.651725] c0 migrating range 70284 70285, retry (0)
  571. <6>[ 3.669445] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
  572. <6>[ 3.724138] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  573. <6>[ 3.724182] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  574. <6>[ 3.724222] c0 usb usb2: Product: s5p OHCI
  575. <6>[ 3.724248] c0 usb usb2: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ohci_hcd
  576. <6>[ 3.724285] c0 usb usb2: SerialNumber: s5p-ohci
  577. <6>[ 3.725254] c0 hub 2-0:1.0: USB hub found
  578. <6>[ 3.725294] c0 hub 2-0:1.0: 3 ports detected
  579. <6>[ 3.726213] c0 usbcore: registered new interface driver usblp
  580. <6>[ 3.726246] c0 Initializing USB Mass Storage driver...
  581. <6>[ 3.726502] c0 usbcore: registered new interface driver usb-storage
  582. <6>[ 3.726537] c0 USB Mass Storage support registered.
  583. <6>[ 3.726982] c0 usbcore: registered new interface driver usbserial
  584. <6>[ 3.727016] c0 usbserial: USB Serial Driver core
  585. <6>[ 3.727225] c0 USB Serial support registered for pl2303
  586. <6>[ 3.727458] c0 usbcore: registered new interface driver pl2303
  587. <6>[ 3.727494] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
  588. <7>[ 3.727799] c0 migrating range 70285 70286, retry (0)
  589. <6>[ 3.745809] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
  590. <6>[ 3.745849] c0 s3c-udc : version 15 March 2009
  591. <7>[ 3.745878] c0 init
  592. <6>[ 3.746458] c0 usb: android_probe pdata: c0aa8670
  593. <6>[ 3.746489] c0 usb: android_probe nluns=0
  594. <7>[ 3.747027] c0 usb: android_bind disconnect
  595. <7>[ 3.747054] c0 usb: usb_gadget_disconnect
  596. <7>[ 3.750212] c0 usb: mass_storage_function_init pdata->nluns=0, cdfs = 1
  597. <7>[ 3.750254] c0 usb: usb_string_id cdev(0xedb31720)->next_string_id=1
  598. <6>[ 3.750434] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
  599. <6>[ 3.750475] c0 android_usb gadget: Number of LUNs=1
  600. <6>[ 3.750507] c0 lun0: LUN: removable CD-ROM file: (no medium)
  601. <7>[ 3.751710] c0 usb: usb_string_id cdev(0xedb31720)->next_string_id=2
  602. <7>[ 3.751747] c0 usb: usb_string_id cdev(0xedb31720)->next_string_id=3
  603. <7>[ 3.751788] c0 usb: usb_string_id cdev(0xedb31720)->next_string_id=4
  604. <7>[ 3.751824] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
  605. <7>[ 3.751857] c0 usb: composite_bind bcdDevice=0x0
  606. <7>[ 3.751885] c0 usb: composite_bind composite_manufacturer=
  607. <6>[ 3.751923] c0 android_usb gadget: android_usb ready
  608. <6>[ 3.751951] c0 usb: Skip udc_enable
  609. <6>[ 3.752462] c0 mousedev: PS/2 mouse device common for all mice
  610. <6>[ 3.753472] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
  611. <6>[ 3.753669] c0 wake enabled for irq 372
  612. <6>[ 3.860070] c0 melfas-ts 3-0048: 0 panel
  613. <3>[ 3.860096] c0 mms_reset excute
  614. <6>[ 4.075164] c0 melfas-ts 3-0048: ILJIN panel
  615. <6>[ 4.075442] c0 melfas-ts 3-0048: boot : 0x1, core : 0x76, config : 0x20
  616. <6>[ 4.075851] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input1
  617. <6>[ 4.076240] c0 s5p_gpioint_set_type irq:388 is at GPB(4)
  618. <6>[ 4.080391] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_wtsr: enable WTSR
  619. <6>[ 4.082989] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_smpl: disable SMPL
  620. <6>[ 4.086029] c0 s5m_rtc_enable_smpl: WTSR_SMPL(0x40)
  621. <6>[ 4.088338] c0 s5m_rtc_read_alarm: 2000/0/1 0:0:0(-1)
  622. <6>[ 4.090563] c0 using rtc device, s5m-rtc, for alarms
  623. <6>[ 4.090624] c0 s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0
  624. <6>[ 4.091082] c0 s5m-rtc s5m-rtc: RTC CHIP NAME: s5m-rtc
  625. <4>[ 4.091304] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  626. <6>[ 4.091488] c0 s3c-rtc exynos-rtc: rtc disabled, re-enabling
  627. <4>[ 4.091566] c0 s3c-rtc exynos-rtc: warning: invalid RTC value so initializing it
  628. <6>[ 4.091913] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
  629. <6>[ 4.092176] c0 i2c /dev entries driver
  630. <6>[ 4.095645] c0 Linux media interface: v0.10
  631. <6>[ 4.096226] c0 lirc_dev: IR Remote Control driver registered, major 248
  632. <6>[ 4.096266] c0 IR NEC protocol handler initialized
  633. <6>[ 4.096295] c0 IR RC5(x) protocol handler initialized
  634. <6>[ 4.096324] c0 IR RC6 protocol handler initialized
  635. <6>[ 4.096352] c0 IR JVC protocol handler initialized
  636. <6>[ 4.096380] c0 IR Sony protocol handler initialized
  637. <6>[ 4.096408] c0 IR RC5 (streamzap) protocol handler initialized
  638. <6>[ 4.096440] c0 IR LIRC bridge handler initialized
  639. <6>[ 4.096469] c0 Linux video capture interface: v2.00
  640. <6>[ 4.096661] c0 v4l2_i2c_drv_init: ISX012 init
  641. <6>[ 4.097327] c0 v4l2_i2c_drv_init: SR130PC20 called
  642. <6>[ 4.097875] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
  643. <6>[ 4.097960] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
  644. <2>[ 4.098191] c0 Initialize JPEG driver
  645. <6>[ 4.100837] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  646. <6>[ 4.101127] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  647. <4>[ 4.101439] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
  648. <6>[ 4.101807] c0 s5p_int_src_ext_hpd()
  649. <6>[ 4.101836] c0 s5p_hpd_read_gpio(0)
  650. <6>[ 4.102295] c0 s5p_hpd_read_gpio(0)
  651. <6>[ 4.102863] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
  652. <4>[ 4.103063] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
  653. <4>[ 4.103100] c0 i2c-core: driver [s5p_ddc] using legacy resume method
  654. <6>[ 4.103380] c0 mfc_init_mem_mgr[581] cma 0x58100000 0x5b200000 0x3100000 0x3100000 1
  655. <6>[ 4.103436] c0 mfc_init_mem_mgr[641]: base 0x58100000, size 0x3100000, addr 0xd8100000
  656. <6>[ 4.103857] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
  657. <6>[ 4.104612] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
  658. <6>[ 4.105814] c0 sii9234_cfg_gpio()
  659. <6>[ 4.105869] c0 Registered interrupt support for gpio group 10.
  660. <6>[ 4.105907] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  661. <6>[ 4.106151] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
  662. <6>[ 4.106376] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  663. <6>[ 4.106506] c0 sii9234 : create mhl sysfile
  664. <6>[ 4.107153] c0 input: sii9234_rcp as /devices/virtual/input/input2
  665. <3>[ 4.159634] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  666. <3>[ 4.165998] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  667. <6>[ 4.173891] c0 wake enabled for irq 371
  668. <7>[ 4.250038] c0 [keys] flip_cover_work : 1
  669. <4>[ 4.283118] c0 i2c-core: driver [sec-fuelgauge] using legacy suspend method
  670. <4>[ 4.283157] c0 i2c-core: driver [sec-fuelgauge] using legacy resume method
  671. <6>[ 4.283211] c0 func:max77693_charger_init
  672. <6>[ 4.283341] c0 max77693_charger_probe: MAX77693 Charger driver probe
  673. <6>[ 4.287105] c0 max77693_get_health_state: battery is okaybut its voltage is low
  674. <3>[ 4.289755] c0 power_supply sec-charger: driver failed to report `power_now' property
  675. <6>[ 4.297264] c0 max77693_get_health_state: battery is okaybut its voltage is low
  676. <3>[ 4.299912] c0 power_supply sec-charger: driver failed to report `power_now' property
  677. <6>[ 4.310233] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  678. <6>[ 4.310668] c0 Bluetooth: HCI UART driver ver 2.2
  679. <6>[ 4.310700] c0 Bluetooth: HCI H4 protocol initialized
  680. <6>[ 4.311340] c0 cpuidle: using governor ladder
  681. <6>[ 4.312348] c0 cpuidle: using governor menu
  682. <6>[ 4.312554] c0 mshci: Mobile Storage Host Controller Interface driver
  683. <6>[ 4.312589] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
  684. <6>[ 4.312809] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (13333333 Hz)
  685. <3>[ 4.314087] c0 mmc0: Version ID 0x5342240a.
  686. <6>[ 4.318059] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
  687. <6>[ 4.319600] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
  688. <6>[ 4.319943] c0 sdhci: Secure Digital Host Controller Interface driver
  689. <6>[ 4.319979] c0 sdhci: Copyright(c) Pierre Ossman
  690. <6>[ 4.320161] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
  691. <6>[ 4.320509] c0 mmc1: vtf_2.8v regulator found
  692. <7>[ 4.320754] c0 Registered led device: mmc1::
  693. <6>[ 4.322712] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
  694. <6>[ 4.322768] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  695. <6>[ 4.322995] c0 wake enabled for irq 380
  696. <6>[ 4.323020] c0 mmc1: card removed.
  697. <6>[ 4.323135] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
  698. <3>[ 4.323230] c0 mmc2: no vmmc regulator found
  699. <7>[ 4.326322] c0 Registered led device: mmc2::
  700. <6>[ 4.326629] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  701. <6>[ 4.336580] c0 usbcore: registered new interface driver usbhid
  702. <6>[ 4.336614] c0 usbhid: USB HID core driver
  703. <6>[ 4.337358] c0 logger: created 2048K log 'log_main'
  704. <6>[ 4.337608] c0 logger: created 256K log 'log_events'
  705. <6>[ 4.337855] c0 logger: created 1024K log 'log_radio'
  706. <6>[ 4.338107] c0 logger: created 256K log 'log_system'
  707. <6>[ 4.338143] c0 sec_getlog_supply_loggerinfo: 0xc0b97848 0xc0d97848 0xc0e97848 0xc0ed7848
  708. <6>[ 4.339852] c0 successful, position = 5
  709. <6>[ 4.340439] c0 input: accelerometer as /devices/virtual/input/input3
  710. <6>[ 4.340950] c0 Registered sensors device: accelerometer_sensor
  711. <3>[ 4.341222] c0 geomagnetic_probe, is called
  712. <6>[ 4.344251] c0 input: geomagnetic as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input4
  713. <6>[ 4.344892] c0 input: geomagnetic_raw as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input5
  714. <6>[ 4.345425] c0 geomagnetic_probe: set from board file.
  715. <6>[ 4.345460] c0 geomagnetic_probe: yas magnetic position is 7
  716. <6>[ 4.345793] c0 geomagnetic_probe: yamaha magnetic sensor id = 2
  717. <3>[ 4.346004] c0 mmc0: cmd 52 response timeout error
  718. <4>[ 4.349534] c0 i2c-core: driver [yas532] using legacy suspend method
  719. <4>[ 4.349572] c0 i2c-core: driver [yas532] using legacy resume method
  720. <3>[ 4.350160] c0 mmc0: cmd 52 response timeout error
  721. <6>[ 4.354422] c0 input: orientation as /devices/virtual/input/input6
  722. <6>[ 4.355002] c0 cm3323_i2c_probe is called.
  723. <6>[ 4.355506] c0 cm3323_setup_reg is success.
  724. <6>[ 4.355881] c0 input: light_sensor as /devices/virtual/input/input7
  725. <6>[ 4.356523] c0 Registered sensors device: light_sensor
  726. <6>[ 4.356571] c0 cm3323_i2c_probe is success.
  727. <6>[ 4.356837] c0 ir_remocon_probe start!
  728. <3>[ 4.358164] c0 mmc0: cmd 8 response timeout error
  729. <3>[ 4.362280] c0 mmc0: cmd 5 response timeout error
  730. <3>[ 4.366908] c0 mmc0: cmd 5 response timeout error
  731. <3>[ 4.371595] c0 mmc0: cmd 5 response timeout error
  732. <3>[ 4.376282] c0 mmc0: cmd 5 response timeout error
  733. <3>[ 4.381008] c0 mmc0: cmd 55 response timeout error
  734. <3>[ 4.385745] c0 mmc0: cmd 55 response timeout error
  735. <3>[ 4.390518] c0 mmc0: cmd 55 response timeout error
  736. <3>[ 4.395293] c0 mmc0: cmd 55 response timeout error
  737. <6>[ 4.417623] c0 sec-fuelgauge 14-0036: fg_check_status_reg: addr(0x00), data(0x0400)
  738. <6>[ 4.418552] c0 sec-fuelgauge 14-0036: sec_fg_irq_thread: Fuel-alert alerted!
  739. <6>[ 4.420876] c0 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Abnormal Current Consumption jump by -1 units
  740. <6>[ 4.420931] c0 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Last Reported SOC (0).
  741. <3>[ 4.420983] c0 sec_hal_fg_fuelalert_process: Fail to get psy (battery)
  742. <6>[ 4.426082] c0 mmc0: MAG2GC: 1501004d41473247430035c8b06b60bd
  743. <6>[ 4.510747] c0 8. irda_fw_update: chip : 0202, bin : 0202, latest FW_ver
  744. <6>[ 4.533410] c0 mmc0 : 20 : 00 : 01400312 : 1400312.
  745. <6>[ 4.533443] c0 mmc0 : enable PON feature : 20 : 00 : 01400312
  746. <4>[ 4.536772] c0 mmc0: Voltage range not supported for power class.
  747. <3>[ 4.536809] c0 mmc0: power class selection to bus width 8 failed
  748. <4>[ 4.558767] c0 mmc0: Voltage range not supported for power class.
  749. <3>[ 4.558804] c0 mmc0: power class selection to bus width 8 ddr 2 failed
  750. <6>[ 4.564252] c0 mmc0: new high speed DDR MMC card at address 0001
  751. <6>[ 4.564846] c0 mmcblk0: mmc0:0001 MAG2GC 14.6 GiB
  752. <6>[ 4.573292] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
  753. <6>[ 4.609590] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
  754. <6>[ 4.615481] c0 mckernelapi : Mobicore API module initialized!
  755. <6>[ 4.615542] c0 mcdrvkmod mcd: MobiCore Driver, Build: Mon Jun 13 10:34:21 2016
  756. <6>[ 4.615584] c0 mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
  757. <6>[ 4.615621] c0 mcdrvkmod mcd: MobiCore *** SAMSUNG_Exynos4x12_Release_tbase-200_V005 ###
  758. <6>[ 4.616989] c0 usbcore: registered new interface driver snd-usb-audio
  759. <6>[ 4.618936] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
  760. <6>[ 4.619098] c0 audss_init: RCLK SRC[busclk]
  761. <7>[ 4.620051] c0 i2s_txctrl: Turn Off - spr is no active
  762. <4>[ 4.764240] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
  763. <4>[ 4.764284] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
  764. <6>[ 4.798389] c0 Sound: enabled mclk
  765. <7>[ 4.798416] c0 pmu_debug: 0x00000900
  766. <6>[ 4.808437] c0 Sound: state: 1, use_cnt: 1
  767. <3>[ 4.810892] c0 wm8994-codec wm8994-codec: dapm: unknown pin FM In
  768. <3>[ 4.815566] c0 wm8994-codec wm8994-codec: dapm: unknown pin Third Mic
  769. <6>[ 4.830066] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
  770. <6>[ 4.835171] c0 asoc: wm8994-aif2 <-> tab3.cp mapping ok
  771. <6>[ 4.836637] c0 asoc: wm8994-aif3 <-> tab3.bt mapping ok
  772. <7>[ 4.836747] c0 i2s_txctrl: Turn Off - spr is no active
  773. <7>[ 4.838371] c0 migrating range 702a0 702c0, retry (0)
  774. <7>[ 4.856675] c0 migrating range 702c0 702e0, retry (0)
  775. <6>[ 4.874554] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
  776. <6>[ 4.877517] c0 Samsung SRP driver, (c)2011 Samsung Electronics
  777. <6>[ 4.878773] c0 ALSA device list:
  778. <6>[ 4.878799] c0 #0: TAB3_WM1811
  779. <6>[ 4.878985] c0 GACT probability NOT on
  780. <6>[ 4.879017] c0 Mirror/redirect action on
  781. <6>[ 4.879044] c0 u32 classifier
  782. <6>[ 4.879064] c0 Actions configured
  783. <6>[ 4.879090] c0 Netfilter messages via NETLINK v0.30.
  784. <6>[ 4.879191] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  785. <6>[ 4.880767] c0 ctnetlink v0.93: registering with nfnetlink.
  786. <6>[ 4.880849] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  787. <6>[ 4.880889] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  788. <6>[ 4.881825] c0 xt_time: kernel timezone is -0000
  789. <6>[ 4.883724] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
  790. <6>[ 4.884042] c0 arp_tables: (C) 2002 David S. Miller
  791. <6>[ 4.884133] c0 TCP cubic registered
  792. <6>[ 4.885954] c0 NET: Registered protocol family 10
  793. <6>[ 4.889277] c0 Mobile IPv6
  794. <6>[ 4.889331] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
  795. <6>[ 4.889661] c0 IPv6 over IPv4 tunneling driver
  796. <6>[ 4.895632] c0 NET: Registered protocol family 17
  797. <6>[ 4.895694] c0 NET: Registered protocol family 15
  798. <6>[ 4.895895] c0 Bluetooth: RFCOMM TTY layer initialized
  799. <6>[ 4.895943] c0 Bluetooth: RFCOMM socket layer initialized
  800. <6>[ 4.895975] c0 Bluetooth: RFCOMM ver 1.11
  801. <6>[ 4.896000] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  802. <6>[ 4.896033] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  803. <6>[ 4.896351] c0 NET: Registered protocol family 35
  804. <5>[ 4.896861] c0 Registering the dns_resolver key type
  805. <6>[ 4.896926] c0 EXYNOS4X12: Adaptive Support Voltage init
  806. <6>[ 4.896960] c0 EXYNOS4X12(SG): ORIG : 0 MOD : 0 RESULT : 0
  807. <6>[ 4.897005] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  808. <5>[ 4.897076] c0 Registering SWP/SWPB emulation handler
  809. <5>[ 4.897109] c0 Registering SDIV/UDIV emulation handler
  810. <6>[ 4.897155] c0 DVFS : VDD_ARM Voltage table set with 0 Group
  811. <6>[ 4.898015] c0 DVFS : VDD_INT Voltage table set with 0 Group
  812. <6>[ 4.898474] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14
  813. <6>[ 4.898521] c0 s5p_tmu_probe: cpufreq_level[14], busfreq_value[100100]
  814. <6>[ 4.898557] c0 @@@ get_refresh_interval = 0x2e
  815. <6>[ 4.898582] c0 @@@ get_refresh_interval = 0x5d
  816. <6>[ 4.898616] c0 ** temperature set value **
  817. <6>[ 4.898636] c0 1st throttling stop_temp = 78, start_temp = 80
  818. <6>[ 4.898665] c0 2nd throttling stop_temp = 87, start_tmep = 103
  819. <6>[ 4.898695] c0 tripping temp = 110, s/w emergency temp = 120
  820. <6>[ 4.898726] c0 mem throttling stop_temp = 80, start_temp = 85
  821. <6>[ 4.898761] c0 tc_voltage stop_temp = 13, start_temp = 10
  822. <6>[ 4.903001] c0 zswap: loading zswap
  823. <6>[ 4.903433] c0 zswap: using lzo compressor
  824. <4>[ 4.909482] c0 regulator_init_complete: vdd_int range: incomplete constraints, leaving on
  825. <4>[ 4.910114] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on
  826. <4>[ 4.911200] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
  827. <6>[ 4.912482] c0 s5m-rtc s5m-rtc: setting system clock to 2012-01-01 00:03:54 UTC (1325376234)
  828. <7>[ 4.912623] c0 ctrl->mem.size = 0x1a00000
  829. <7>[ 4.912648] c0 ctrl->mem.base = 0x6dd00000
  830. <6>[ 4.913171] c0 FIMC0 registered successfully
  831. <7>[ 4.913320] c0 ctrl->mem.size = 0x500000
  832. <7>[ 4.913344] c0 ctrl->mem.base = 0x0
  833. <6>[ 4.913713] c0 FIMC1 registered successfully
  834. <7>[ 4.913853] c0 ctrl->mem.size = 0x0
  835. <7>[ 4.913876] c0 ctrl->mem.base = 0x0
  836. <6>[ 4.914239] c0 FIMC2 registered successfully
  837. <7>[ 4.914387] c0 ctrl->mem.size = 0x0
  838. <7>[ 4.914410] c0 ctrl->mem.base = 0xffffffea
  839. <6>[ 4.914763] c0 FIMC3 registered successfully
  840. <6>[ 4.915370] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
  841. <6>[ 4.950620] c0 Freeing init memory: 260K
  842. <5>[ 4.953582] c1 init: init first stage started!
  843. <7>[ 4.959600] c1 SELinux: 2048 avtab hash slots, 7527 rules.
  844. <7>[ 4.964480] c1 SELinux: 2048 avtab hash slots, 7527 rules.
  845. <7>[ 4.964527] c1 SELinux: 1 users, 2 roles, 721 types, 0 bools, 1 sens, 1024 cats
  846. <7>[ 4.964573] c1 SELinux: 63 classes, 7527 rules
  847. <7>[ 4.966837] c1 SELinux: Completing initialization.
  848. <7>[ 4.966868] c1 SELinux: Setting up existing superblocks.
  849. <7>[ 4.966923] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  850. <7>[ 4.966981] c1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  851. <7>[ 4.968047] c1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
  852. <7>[ 4.968111] c1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
  853. <7>[ 4.968178] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  854. <7>[ 4.968246] c1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  855. <7>[ 4.973080] c1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  856. <7>[ 4.973138] c1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  857. <7>[ 4.973187] c1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  858. <7>[ 4.973248] c1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  859. <7>[ 4.973319] c1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  860. <7>[ 4.973491] c1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  861. <7>[ 4.973567] c1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  862. <5>[ 5.090060] c1 init: (Initializing SELinux non-enforcing took 0.14s.)
  863. <5>[ 5.096421] c0 init: init second stage started!
  864. <3>[ 5.103694] c0 init: property_set("ro.boot.selinux", "enforcing") failed
  865. <5>[ 5.113529] c0 init: Running restorecon...
  866. <3>[ 5.172189] c0 init: waitpid failed: No child processes
  867. <3>[ 5.178429] c0 init: property_set("ro.carrier", "wifi-only") failed
  868. <5>[ 5.183873] c0 init: (Loading properties from /default.prop took 0.01s.)
  869. <3>[ 5.185329] c0 init: /init.rc: 13: invalid keyword 'setcon'
  870. <3>[ 5.189784] c0 init: /init.rc: 63: invalid keyword 'load_all_props'
  871. <3>[ 5.196183] c0 init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
  872. <5>[ 5.206182] c0 init: (Parsing /init.recovery.usb.rc took 0.00s.)
  873. <5>[ 5.206359] c0 init: (Parsing /init.recovery.service.rc took 0.00s.)
  874. <3>[ 5.206456] c0 init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc': No such file or directory
  875. <3>[ 5.216455] c0 init: could not import file '/init.recovery.smdk4x12.rc' from '/init.rc': No such file or directory
  876. <5>[ 5.226760] c0 init: (Parsing /init.rc took 0.04s.)
  877. <5>[ 5.227447] c0 init: Starting service 'ueventd'...
  878. <5>[ 5.228338] c0 init: Starting service 'healthd'...
  879. <5>[ 5.229178] c0 init: Waiting for /dev/.coldboot_done...
  880. <5>[ 5.232547] c1 ueventd: ueventd started!
  881. <3>[ 5.234737] c0 charger: void healthd_board_init(struct healthd_config *): Unable to load battery scale image
  882. <3>[ 5.243166] c0 healthd: wakealarm_init: timerfd_create failed
  883. <4>[ 5.251893] c0 healthd: BatteryFullChargePath not found
  884. <4>[ 5.251942] c0 healthd: BatteryCycleCountPath not found
  885. <4>[ 5.255318] c0 healthd: sec-charger: Unknown power supply type
  886. <4>[ 5.260607] c0 healthd: sec-charger: Unknown power supply type
  887. <3>[ 5.264873] c1 power_supply sec-fuelgauge: driver failed to report `status' property
  888. <4>[ 5.277204] c0 healthd: sec-charger: Unknown power supply type
  889. <4>[ 5.283145] c0 healthd: sec-charger: Unknown power supply type
  890. <4>[ 5.288199] c0 healthd: sec-charger: Unknown power supply type
  891. <4>[ 5.292517] c0 healthd: sec-charger: Unknown power supply type
  892. <6>[ 5.550267] c1 max77693_get_health_state: battery is okaybut its voltage is low
  893. <3>[ 5.552930] c1 power_supply sec-charger: driver failed to report `power_now' property
  894. <6>[ 5.900103] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  895. <6>[ 5.902084] c0 exynos4_handler_tmu_state: inform to init state to platform.
  896. <5>[ 5.916839] c1 ueventd: Coldboot took 0.68s.
  897. <5>[ 5.920052] c0 init: Waiting for /dev/.coldboot_done took 0.69s.
  898. <3>[ 5.920204] c0 init: /dev/hw_random not found
  899. <7>[ 5.932456] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  900. <3>[ 5.933032] c0 init: /dev/hw_random not found
  901. <7>[ 5.937721] c0 usb: enable_store enabled=0, !dev->enabled=1
  902. <7>[ 5.937766] c0 usb: usb_gadget_disconnect
  903. <5>[ 5.938137] c0 init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
  904. <7>[ 5.938316] c0 usb: functions_store buff=adb
  905. <7>[ 5.938358] c0 usb: android_enable_function name=adb
  906. <5>[ 5.938860] c0 init: (Loading properties from /system/build.prop took 0.00s.)
  907. <5>[ 5.938961] c0 init: (Loading properties from /vendor/build.prop took 0.00s.)
  908. <5>[ 5.939053] c0 init: (Loading properties from /factory/factory.prop took 0.00s.)
  909. <5>[ 5.941192] c0 init: (Loading properties from /data/local.prop took 0.00s.)
  910. <3>[ 5.941285] c0 init: Unable to open persistent property directory "/data/property": No such file or directory
  911. <5>[ 5.951647] c0 init: Starting service 'set_permissive'...
  912. <5>[ 5.952600] c0 init: Starting service 'recovery'...
  913. <7>[ 5.954091] c0 usb: enable_store enabled=0, !dev->enabled=1
  914. <7>[ 5.954157] c0 usb: usb_gadget_disconnect
  915. <5>[ 5.954325] c0 init: Starting service 'adbd'...
  916. <7>[ 5.955577] c0 usb: enable_store enabled=1, !dev->enabled=1
  917. <7>[ 5.955640] c0 usb: enable_store f:adb
  918. <7>[ 5.955684] c0 usb: enable_store vendor=18d1,product=d001,bcdDevice=226
  919. <7>[ 5.955754] c0 ,Class=0,SubClass=0,Protocol=0
  920. <7>[ 5.955791] c0 usb: enable_store next cmd : usb_add_config
  921. <6>[ 5.966453] c0 adb_open
  922. <7>[ 5.966494] c0 usb: android_bind_enabled_functions f:adb
  923. <6>[ 5.966534] c0 adb_bind_config
  924. <7>[ 5.966586] c0 usb: usb_gadget_connect
  925. <4>[ 5.986000] c0 healthd: sec-charger: Unknown power supply type
  926. <6>[ 5.997171] c0 failed to copy MFC F/W during init
  927. <5>[ 6.020269] c1 init: Service 'set_permissive' (pid 1778) exited with status 0
  928. <3>[ 6.051922] c1 init: avc: denied { set } for property=twrp.crash_counter pid=1779 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
  929. <6>[ 6.085446] c0 s3cfb s3cfb.0: change blank mode=4, fb0, win2
  930. <6>[ 6.085523] c0 s3cfb s3cfb.0: change blank mode=0, fb0, win2
  931. <6>[ 6.085582] c0 s3cfb s3cfb.0: parent clock: 72727272, vclk: 72165000, vclk div: 1
  932. <6>[ 6.087849] c0 s3cfb s3cfb.0: fifo underrun occur
  933. <6>[ 6.088019] c0 s3cfb s3cfb.0: fifo underrun occur
  934. <6>[ 6.088374] c0 s3cfb s3cfb.0: fifo underrun occur
  935. <6>[ 6.089168] c0 s3cfb s3cfb.0: fifo underrun occur
  936. <6>[ 6.090133] c0 s3cfb s3cfb.0: fifo underrun occur
  937. <6>[ 6.090554] c0 s3cfb s3cfb.0: fifo underrun occur
  938. <6>[ 6.091030] c0 s3cfb s3cfb.0: fifo underrun occur
  939. <6>[ 6.091095] c0 s3cfb s3cfb.0: fifo underrun occur
  940. <6>[ 6.091399] c0 s3cfb s3cfb.0: fifo underrun occur
  941. <6>[ 6.091872] c0 s3cfb s3cfb.0: fifo underrun occur
  942. <6>[ 6.091992] c0 s3cfb s3cfb.0: fifo underrun occur
  943. <6>[ 6.092245] c0 s3cfb s3cfb.0: fifo underrun occur
  944. <6>[ 6.092414] c0 s3cfb s3cfb.0: fifo underrun occur
  945. <6>[ 6.092786] c0 s3cfb s3cfb.0: fifo underrun occur
  946. <6>[ 6.092906] c0 s3cfb s3cfb.0: fifo underrun occur
  947. <6>[ 6.093330] c0 s3cfb s3cfb.0: fifo underrun occur
  948. <6>[ 6.093581] c0 s3cfb s3cfb.0: fifo underrun occur
  949. <6>[ 6.093752] c0 s3cfb s3cfb.0: fifo underrun occur
  950. <6>[ 6.094174] c0 s3cfb s3cfb.0: fifo underrun occur
  951. <6>[ 6.094545] c0 s3cfb s3cfb.0: fifo underrun occur
  952. <6>[ 6.094716] c0 s3cfb s3cfb.0: fifo underrun occur
  953. <4>[ 6.225896] c0 EXT4-fs (mmcblk0p19): warning: maximal mount count reached, running e2fsck is recommended
  954. <6>[ 6.227888] c0 EXT4-fs (mmcblk0p19): recovery complete
  955. <6>[ 6.227946] c0 EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts:
  956. <7>[ 6.228043] c0 SELinux: initialized (dev mmcblk0p19, type ext4), uses xattr
  957. <6>[ 6.248126] c0 EXT4-fs (mmcblk0p21): recovery complete
  958. <6>[ 6.248186] c0 EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  959. <7>[ 6.248273] c0 SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  960. <6>[ 6.338058] c0 EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  961. <7>[ 6.338126] c0 SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  962. <6>[ 6.405598] c0 EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  963. <7>[ 6.405691] c0 SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  964. <6>[ 6.442034] c1 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts:
  965. <7>[ 6.442123] c1 SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
  966. <6>[ 6.550190] c0 max77693-muic max77693-muic: func:max77693_muic_init_detect
  967. <6>[ 6.551863] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  968. <6>[ 6.552570] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:-1 ret:0
  969. <6>[ 6.552635] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x43
  970. <6>[ 6.552718] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:3 vb:40 dxovp:0 cable_type:19
  971. <6>[ 6.552796] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED
  972. <6>[ 6.552863] c0 max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:43 cable_type:19
  973. <6>[ 6.552965] c0 max77693-muic max77693-muic: max77693_muic_handle_attach:TA
  974. <6>[ 6.553031] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  975. <6>[ 6.553129] c0 max77693_muic_charger_cb: cable_type(3), prev_cable(0)
  976. <6>[ 6.554260] c0 sec_bat_get_cable_from_extended_cable_type : cable(0x30000) - main(0x03), sub(0x00), main(0x00)
  977. <6>[ 6.554347] c0 sec_bat_get_cable_from_extended_cable_type : cable(0x03) - input cur(1800mA), charge cur(1800mA)
  978. <6>[ 6.554431] c0 sec_bat_check_cable_result_callback : Cable Type(3)
  979. <6>[ 6.557459] c0 max77693_set_charge_current: charge current 1800 mA, reg_data(0xb6)
  980. <6>[ 6.566121] c0 max77693_set_topoff_current: reg_data(0x25), topoff(250), time(40)
  981. <6>[ 6.566592] c0 sec-fuelgauge 14-0036: sec_hal_fg_set_property: Reset low_batt_alarm
  982. <6>[ 6.900089] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0
  983. <6>[ 6.901590] c0 normal: free cpufreq_limit & interrupt enable.
  984. <6>[ 7.093255] c0 max77693_get_health_state: battery is okaybut its voltage is low
  985. <4>[ 7.096242] c0 healthd: sec-charger: Unknown power supply type
  986. <6>[ 7.113809] c1 max77693_get_health_state: battery is okaybut its voltage is low
  987. <4>[ 7.116730] c0 healthd: sec-charger: Unknown power supply type
  988. <6>[ 7.310053] c1 max77693_chgin_init_work
  989. <6>[ 7.312878] c0 max77693_irq_thread: interrupt source(0x01)
  990. <6>[ 7.313390] c0 max77693_irq_thread: charger interrupt(0x48)
  991. <3>[ 8.026003] c1 init: avc: denied { set } for property=sys.usb.config pid=1779 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
  992. <7>[ 8.042214] c1 usb: enable_store enabled=0, !dev->enabled=0
  993. <7>[ 8.042254] c1 usb: usb_gadget_disconnect
  994. <7>[ 8.042287] c1 usb: usb_remove_config cdev->config= (null), config=c0ad8e88
  995. <6>[ 8.042564] c1 adb_release
  996. <6>[ 8.042863] c0 adb_open
  997. <7>[ 8.048184] c1 usb: enable_store enabled=0, !dev->enabled=1
  998. <7>[ 8.048220] c1 usb: usb_gadget_disconnect
  999. <7>[ 8.048320] c1 usb: functions_store buff=mtp,adb
  1000. <7>[ 8.048354] c1 usb: android_enable_function name=mtp
  1001. <7>[ 8.048386] c1 usb: android_enable_function name=acm
  1002. <7>[ 8.048417] c1 usb: android_enable_function name=adb
  1003. <7>[ 8.048510] c1 usb: enable_store enabled=1, !dev->enabled=1
  1004. <7>[ 8.048544] c1 usb: enable_store f:mtp
  1005. <7>[ 8.048568] c1 usb: enable_store f:acm
  1006. <7>[ 8.048597] c1 usb: acm is enabled. (bcdDevice=0x400)
  1007. <7>[ 8.048628] c1 usb: enable_store f:adb
  1008. <7>[ 8.048655] c1 usb: enable_store vendor=18d1,product=4ee2,bcdDevice=400
  1009. <7>[ 8.048693] c1 ,Class=0,SubClass=0,Protocol=0
  1010. <7>[ 8.048720] c1 usb: enable_store next cmd : usb_add_config
  1011. <7>[ 8.048755] c1 usb: android_bind_enabled_functions f:mtp
  1012. <6>[ 8.048789] c1 mtp_bind_config
  1013. <7>[ 8.048812] c1 usb: usb_string_id cdev(0xedb31720)->next_string_id=5
  1014. <7>[ 8.048874] c1 usb: android_bind_enabled_functions f:acm
  1015. <7>[ 8.048910] c1 usb: usb_string_id cdev(0xedb31720)->next_string_id=6
  1016. <7>[ 8.048947] c1 usb: usb_string_id cdev(0xedb31720)->next_string_id=7
  1017. <7>[ 8.048985] c1 usb: usb_string_id cdev(0xedb31720)->next_string_id=8
  1018. <6>[ 8.049034] c1 DUN is registerd
  1019. <7>[ 8.049056] c1 usb: android_bind_enabled_functions f:adb
  1020. <6>[ 8.049088] c1 adb_bind_config
  1021. <7>[ 8.049116] c1 usb: usb_gadget_connect
  1022. <6>[ 8.067323] c0 EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  1023. <7>[ 8.067389] c0 SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  1024. <6>[ 8.470998] c1 max77693_chgin_isr_work: irq(436), chgin(0x3), prev 0x3
  1025. <6>[ 8.853020] c0 mtp_open
  1026. <3>[ 14.100233] c0 [HOTPLUG OUT] check_down 200000<=200000 && 100<100
  1027. <3>[ 14.105013] c0 CPU_DOWN 1
  1028. <5>[ 14.110128] c0 CPU1: shutdown
  1029. <7>[ 18.800245] c0 usb: usb_ready udc_enable=0
  1030. <6>[ 20.560270] c0 max77693-muic max77693-muic: func:max77693_muic_usb_detect info->muic_data->sw_path:0
  1031. <3>[ 25.650105] c0 [HOTPLUG IN] check_up 800000>=500000 && 200>100
  1032. <3>[ 25.654622] c0 CPU_UP 3
  1033. <4>[ 25.686228] c1 CPU1: Booted secondary processor
  1034. <6>[ 25.686310] c1 notifier_call_chain : NOTIFY BAD tick_notify
  1035. <6>[ 25.690040] c1 Switched to NOHz mode on CPU #1
  1036. <6>[ 28.640154] c0 max77693-muic max77693-muic: func:max77693_muic_mhl_detect cable_type:3
  1037. <6>[ 40.415960] c0 s5m_set_buchg set S5M8767_REG_BUCHG = 0x4f
  1038. <4>[ 55.208110] c1 EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
  1039. <6>[ 55.208465] c1 EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  1040. <7>[ 55.208523] c1 SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  1041. <4>[ 55.239268] c1 EXT4-fs (mmcblk0p20): warning: maximal mount count reached, running e2fsck is recommended
  1042. <6>[ 55.239623] c1 EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts:
  1043. <7>[ 55.239682] c1 SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
  1044. <6>[ 55.371156] c0 SysRq : Emergency Remount R/O
  1045. <6>[ 55.376896] c0 EXT4-fs (mmcblk0p19): re-mounted. Opts: (null)
  1046. <6>[ 55.397089] c0 EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  1047. <4>[ 55.426261] c0 Emergency Remount complete
  1048. <0>[ 55.478726] c1 (sec_debug_set_upload_magic) 0
  1049. <6>[ 55.485393] c0 REBOOT Notifier for CPUFREQ
  1050. <6>[ 55.485428] c0 REBOOT Notifier for BUSFREQ
  1051. <6>[ 55.485915] c0 yas532 10-002e: shutdown +: i2c_device_shutdown+0x0/0x4c
  1052. <6>[ 55.485954] c0 yas532 10-002e: shutdown -
  1053. <6>[ 55.485983] c0 cm3323 9-0010: shutdown +: i2c_device_shutdown+0x0/0x4c
  1054. <6>[ 55.486018] c0 cm3323 9-0010: shutdown -
  1055. <6>[ 55.486046] c0 k3dh 1-0019: shutdown +: i2c_device_shutdown+0x0/0x4c
  1056. <6>[ 55.486209] c0 k3dh 1-0019: shutdown -
  1057. <6>[ 55.486241] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
  1058. <6>[ 55.486277] c0 s5p_ddc 5-003a: shutdown -
  1059. <6>[ 55.486305] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
  1060. <6>[ 55.486343] c0 sii9234_cbus 15-0064: shutdown -
  1061. <6>[ 55.486375] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
  1062. <6>[ 55.486414] c0 sii9234_hdmi_rx 15-0049: shutdown -
  1063. <6>[ 55.486444] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
  1064. <6>[ 55.486482] c0 sii9234_tpi 15-003d: shutdown -
  1065. <6>[ 55.486513] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
  1066. <6>[ 55.486551] c0 sii9234_mhl_tx 15-0039: shutdown -
  1067. <6>[ 55.486704] c0 s5m-rtc s5m-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
  1068. <6>[ 55.486744] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_wtsr: disable WTSR
  1069. <6>[ 55.489793] c0 s5m_rtc_shutdown: WTSR_SMPL reg(0x00)
  1070. <6>[ 55.489822] c0 s5m_rtc_shutdown: success to disable WTSR
  1071. <6>[ 55.489853] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_smpl: disable SMPL
  1072. <6>[ 55.492900] c0 s5m_rtc_enable_smpl: WTSR_SMPL(0x00)
  1073. <6>[ 55.492930] c0 s5m-rtc s5m-rtc: shutdown -
  1074. <6>[ 55.492992] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
  1075. <6>[ 55.493027] c0 dummy 7-0006: shutdown -
  1076. <6>[ 55.493054] c0 s5m87xx 7-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
  1077. <6>[ 55.493090] c0 s5m87xx 7-0066: shutdown -
  1078. <6>[ 55.493118] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
  1079. <6>[ 55.493151] c0 i2c i2c-7: shutdown -
  1080. <6>[ 55.493177] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
  1081. <6>[ 55.493211] c0 i2c i2c-5: shutdown -
  1082. <6>[ 55.493237] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
  1083. <6>[ 55.493272] c0 wm8994 4-001a: shutdown -
  1084. <6>[ 55.493299] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
  1085. <6>[ 55.493333] c0 i2c i2c-4: shutdown -
  1086. <6>[ 55.493358] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
  1087. <6>[ 55.495847] c0 melfas-ts 3-0048: shutdown -
  1088. <6>[ 55.495879] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
  1089. <6>[ 55.495959] c0 i2c i2c-3: shutdown -
  1090. <6>[ 55.495987] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
  1091. <6>[ 55.496021] c0 i2c i2c-1: shutdown -
  1092. <6>[ 55.496049] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
  1093. <6>[ 55.496082] c0 i2c i2c-0: shutdown -
  1094. <6>[ 55.496122] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x110
  1095. <6>[ 55.496165] c0 max77693-muic:max77693_muic_shutdown +
  1096. <6>[ 55.496195] c0 max77693-muic:max77693_muic_shutdown max77693->iolock.count.counter=1
  1097. <6>[ 55.496235] c0 max77693-muic:max77693_muic_shutdown JIGSet: auto detection
  1098. <6>[ 55.497154] c0 max77693-muic:max77693_muic_shutdown -
  1099. <6>[ 55.497184] c0 max77693-muic max77693-muic: shutdown -
  1100. <6>[ 55.497222] c0 max77693-charger max77693-charger: shutdown +: max77693_charger_shutdown+0x0/0xa4
  1101. <6>[ 55.498387] c0 func:max77693_charger_shutdown
  1102. <6>[ 55.498413] c0 max77693-charger max77693-charger: shutdown -
  1103. <6>[ 55.498449] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
  1104. <6>[ 55.498485] c0 dummy 17-0048: shutdown -
  1105. <6>[ 55.498512] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
  1106. <6>[ 55.498548] c0 dummy 17-0025: shutdown -
  1107. <6>[ 55.498575] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
  1108. <6>[ 55.498612] c0 max77693 17-0066: shutdown -
  1109. <6>[ 55.498641] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
  1110. <6>[ 55.498675] c0 i2c i2c-17: shutdown -
  1111. <6>[ 55.498701] c0 lp855x 24-002c: shutdown +: i2c_device_shutdown+0x0/0x4c
  1112. <6>[ 55.498737] c0 lp855x 24-002c: shutdown -
  1113. <6>[ 55.498765] c0 i2c i2c-24: shutdown +: i2c_device_shutdown+0x0/0x4c
  1114. <6>[ 55.498799] c0 i2c i2c-24: shutdown -
  1115. <6>[ 55.498825] c0 mc96 22-0050: shutdown +: i2c_device_shutdown+0x0/0x4c
  1116. <6>[ 55.498860] c0 mc96 22-0050: shutdown -
  1117. <6>[ 55.498889] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
  1118. <6>[ 55.498922] c0 i2c i2c-22: shutdown -
  1119. <6>[ 55.498948] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
  1120. <6>[ 55.498982] c0 i2c i2c-15: shutdown -
  1121. <6>[ 55.499009] c0 i2c i2c-10: shutdown +: i2c_device_shutdown+0x0/0x4c
  1122. <6>[ 55.499042] c0 i2c i2c-10: shutdown -
  1123. <6>[ 55.499067] c0 i2c i2c-9: shutdown +: i2c_device_shutdown+0x0/0x4c
  1124. <6>[ 55.499101] c0 i2c i2c-9: shutdown -
  1125. <6>[ 55.499127] c0 sec-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
  1126. <6>[ 55.499166] c0 sec-fuelgauge 14-0036: shutdown -
  1127. <6>[ 55.499197] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
  1128. <6>[ 55.499230] c0 i2c i2c-14: shutdown -
  1129. <6>[ 55.499328] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
  1130. <6>[ 55.499384] c0 s3c-sdhci s3c-sdhci.3: shutdown -
  1131. <6>[ 55.499417] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
  1132. <6>[ 55.499915] c0 s3c-sdhci s3c-sdhci.2: shutdown -
  1133. <6>[ 55.499958] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
  1134. <6>[ 55.499998] c0 s5p-ohci s5p-ohci: shutdown -
  1135. <6>[ 55.500085] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
  1136. <6>[ 55.500130] c0 s5p-ehci s5p-ehci: shutdown -
  1137. <6>[ 55.500189] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
  1138. <6>[ 55.500231] c0 mdnie mdnie: -mdnie_shutdown
  1139. <6>[ 55.500256] c0 mdnie mdnie: shutdown -
  1140. <6>[ 55.500302] c0 sec-battery sec-battery: shutdown +: sec_battery_shutdown+0x0/0x10
  1141. <6>[ 55.500341] c0 sec-battery sec-battery: shutdown -
  1142. <4>[ 55.500454] c0 Disabling non-boot CPUs ...
  1143. <5>[ 55.501155] c0 CPU1: shutdown
  1144. <0>[ 55.501905] c0 Restarting system with command ''.
  1145. <0>[ 55.505186] c0 pid = 1 name:init
  1146. <0>[ 55.508442] c0 sec_reboot (104, )
  1147.  
  1148. Samsung S-Boot 4.0 for SM-T310 (Feb 16 2017 - 16:22:56)
  1149.  
  1150. EXYNOS4212(EVT 1.0) / 2044MB / 0MB / Rev 6 / T310XXSBQB5 /(PKG_ID 0x500f028)
  1151.  
  1152. BOOTLOADER VERSION : T310XXSBQB5
  1153.  
  1154. PMIC rev = PASS2(4)
  1155. CHECK PWROFFSRC = 0x00
  1156. CHECK RTC PWROFFSRC = 0x00
  1157. [s5m8767] update LDO2 onoff[1]
  1158. [s5m8767] update LDO4 onoff[1]
  1159. [s5m8767] update LDO5 onoff[0]
  1160. [s5m8767] update LDO6 onoff[1]
  1161. [s5m8767] update LDO7 onoff[1]
  1162. [s5m8767] update LDO8 onoff[1]
  1163. [s5m8767] update LDO9 vol[1800]
  1164. [s5m8767] update LDO10 onoff[1]
  1165. [s5m8767] update LDO11 vol[1950], onoff[1]
  1166. [s5m8767] update LDO12 onoff[1]
  1167. [s5m8767] update LDO13 onoff[0]
  1168. [s5m8767] update LDO14 vol[1950], onoff[1]
  1169. [s5m8767] update LDO15 onoff[1]
  1170. [s5m8767] update LDO16 onoff[1]
  1171. [s5m8767] update LDO19 vol[1900]
  1172. [s5m8767] update LDO20 vol[3300]
  1173. [s5m8767] update LDO21 vol[3300]
  1174. [s5m8767] update LDO22 vol[2800]
  1175. [s5m8767] update LDO27 vol[1500]
  1176. cardtype: 0x00000007
  1177. SB_MMC_HS_52MHZ_1_8V_3V_IO
  1178. mmc->card_caps: 0x00000311
  1179. mmc->host_caps: 0x00000311
  1180. [mmc] capacity = 30777344
  1181. Current SBOOT version : VERSION_-+A1
  1182. - read_bl1
  1183. pit_check_signature (PIT) valid.
  1184. initialize_ddi_data: usable! (7:0xe)
  1185. [RPMB] emmc_rpmb_open:
  1186. Get DATA success.
  1187.  
  1188. [RPMB] emmc_rpmb_close:
  1189. initialize_rpmb_data: usable! (SM-T310:VERSION_-+A1)
  1190. PARAM ENV VERSION: v1.0..
  1191. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1192. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1193. set_charger_state: buck(1), chg(1), reg(0x05)
  1194. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1195. set_auto_current: ta_state(1), curr(1800)
  1196. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1197. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1198. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1199. set_charger_state: buck(1), chg(1), reg(0x05)
  1200. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1201. set_auto_current: ta_state(1), curr(1800)
  1202. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1203. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1204. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1205. set_charger_state: buck(1), chg(0), reg(0x04)
  1206. init_fuelgauge: Start!!
  1207. check_battery_type: ADC of the BATT_ID(729)
  1208. check_battery_type: BATTERY TYPE(0)
  1209. init_fuelgauge: Battery type : SDI
  1210. init_fuelgauge: FG Capacity(0x21f6), LearnCFG(0x77), CGain(0x3fa1)
  1211. get_CGAIN: CGain = 0x3fa1
  1212. init_fuelgauge: Already initialized (0x21f6, SDI type)
  1213. fuel_gauge_read_vfsoc: VFSOC(0), data(0x0000)
  1214. fuel_gauge_read_soc: SOC(0), data(0x0089)
  1215. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1216. fuel_gauge_compensate_soc: Start!!
  1217. fuel_gauge_read_soc: SOC(0), data(0x0089)
  1218. fuel_gauge_read_vcell: VCELL(3516), data(0xafd8)
  1219. calculate_table_soc: Get table SOC in case of charging!!
  1220. calculate_table_soc: i(8), vcell(3516), table_soc(1)
  1221. differ(1), table_soc(1), RepSOC(0)
  1222. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1223. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1224. set_charger_state: buck(1), chg(1), reg(0x05)
  1225. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1226. set_auto_current: ta_state(1), curr(1800)
  1227. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  1228. init_microusb_ic: before MUIC: CDETCTRL:0x2d
  1229. init_microusb_ic: after MUIC: CDETCTRL:0x2d
  1230. init_microusb_ic: MUIC: CONTROL1:0x00
  1231. init_microusb_ic: MUIC: CONTROL1:0x00
  1232. init_microusb_ic: MUIC: CONTROL2:0x3b
  1233. init_microusb_ic: MUIC: CONTROL2:0x3b
  1234. ====================
  1235. s5m8767 pmic register
  1236. ====================
  1237. ID = 0x05
  1238. ONSRC = 0x04
  1239. STATUS1 = 0x00
  1240. STATUS2 = 0x16
  1241. STATUS3 = 0x07
  1242. IRQ1 = 0x00
  1243. IRQ2 = 0x38
  1244. IRQ3 = 0x00
  1245. PWROFFSRC = 0x00
  1246. PMIC_RTC_WTSR_SMPL_REG = 0x00
  1247. S5M8767_REG_BUCHG = 0x6f
  1248. s5p_check_keypad: 0x0
  1249. s5p_check_reboot_mode: INFORM3 = 12345670 ... setting REBOOT_MODE to 0
  1250. s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
  1251. s5p_check_download: 0
  1252. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1253. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  1254. check_pm_status: normal reset, do not enter LPM mode.
  1255. AST_POWERON..
  1256. scr_draw_image: draw 'logo.jpg'...
  1257. read 'logo.jpg'(55175) completed.
  1258. cmu_div:10, div:1, src_clk:800000000, pixel_clk:72161280
  1259. s5p_dsim_display_config: VIDEO MODE
  1260. 5E, 8C, 10,
  1261. BL_ID : 3
  1262. <start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
  1263. <start_checksum:483>offset:50, size:6296
  1264. <start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:25
  1265. Not Need Movinand Checksum
  1266. Movinand Checksum Confirmation Pass
  1267. [mobi_drv] add: 0x43e51c40, size: 3933
  1268. MobiCore INIT response = 0
  1269. MobiCore RTM has initialized!
  1270. MobiCore IDLE flag = 0
  1271. MobiCore driver address 43e51c40, size = 3933
  1272. MobiCore RTM Notified back!
  1273. MobiCore Driver loaded and RTM IDLE!
  1274. MobiCore RTM has been uninitialized!
  1275. load_kernel: loading boot image from 147456..
  1276. Verify_Binary_Signature: failed.
  1277. pit_check_signature (BOOT) invalid.
  1278. Set invalid sign flag
  1279. No need to update kernel type.
  1280.  
  1281. SMC Num = 0x83000001
  1282.  
  1283. mobismc success!!! [ret = 0]
  1284. [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A1, rpmb_version:VERSION_-+A1
  1285. rpmb_version:49, cur_version:49
  1286. DDI value :0x0000000e
  1287. ATAG_CORE: 5 54410001 0 0 0
  1288. ATAG_MEM: 4 54410002 20000000 40000000
  1289. ATAG_MEM: 4 54410002 1FC00000 60000000
  1290. ATAG_MEM: 4 54410002 20000000 80000000
  1291. ATAG_MEM: 4 54410002 20000000 A0000000
  1292. ATAG_SERIAL: 4 54410006 430035c8 b06b60bd
  1293. ATAG_INITRD2: 4 54420005 42000000 3d5f2e
  1294. ATAG_REVISION: 3 54410007 6
  1295. ATAG_CMDLINE: a3 54410009 'console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=2fba02cab31e3f6c2923b303211b8a65 connie=SM-T310_OPEN_EUR_8fb00f1935619a5b1d035a8c123c20be androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000'
  1296. ATAG_NONE: 0 0
  1297.  
  1298. Starting kernel at 0x40008000...
  1299.  
  1300. SWITCH_SEL(3)
  1301. <6>[ 0.000000] c0 Initializing cgroup subsys cpuset
  1302. <6>[ 0.000000] c0 Initializing cgroup subsys cpu
  1303. <5>[ 0.000000] c0 Linux version 3.0.31-kerNoleCM14.1+ (mika@arch-desktop) (gcc version 4.8 (GCC) ) #11 SMP PREEMPT Fri Mar 1 22:50:19 CET 2019
  1304. <4>[ 0.000000] c0 CPU: ARMv7 Processor [412fc098] revision 8 (ARMv7), cr=10c5387d
  1305. <4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  1306. <4>[ 0.000000] c0 Machine: SMDK4x12
  1307. <3>[ 0.000000] c0 exynos_page_hole_area_reserve: Reserved 0x80000000 ~ 0xc0000000 for marking page holes
  1308. <6>[ 0.000000] c0 cma: CMA: reserved 8 MiB at 65800000
  1309. <6>[ 0.000000] c0 cma: CMA: reserved 40 MiB at 58800000
  1310. <6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 70000000
  1311. <6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
  1312. <4>[ 0.000000] c0 CPU EXYNOS4212 (id 0x43220210)
  1313. <7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
  1314. <6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
  1315. <3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
  1316. <3>[ 0.000000] c0 audiocdclk: no parent clock specified
  1317. <3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
  1318. <7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
  1319. <7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
  1320. <6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
  1321. <6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
  1322. <6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
  1323. <6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
  1324. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  1325. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  1326. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  1327. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  1328. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  1329. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  1330. <6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
  1331. <6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
  1332. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  1333. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  1334. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  1335. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  1336. <6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 72727272
  1337. <6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
  1338. <6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 72727272
  1339. <6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
  1340. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  1341. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  1342. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
  1343. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
  1344. <6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
  1345. <6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
  1346. <6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
  1347. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6f700000/0x00800000 for 'fimd'
  1348. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dd00000/0x01a00000 for 'fimc0'
  1349. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dc00000/0x00100000 for 'srp'
  1350. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x60800000/0x00400000 for 'mfc-normal'
  1351. <6>[ 0.000000] c0 S5P/CMA: Reserving 0x8700000 for secure region aligned by 0x8000000.
  1352. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58000000/0x00100000 for 'sectbl'
  1353. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58100000/0x03100000 for 'mfc-secure'
  1354. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x5b200000/0x05500000 for 'ion'
  1355. <0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
  1356. <0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
  1357. <7>[ 0.000000] c0 On node 0 totalpages: 523264
  1358. <7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0b9b1a0, node_mem_map c0fdf000
  1359. <7>[ 0.000000] c0 Normal zone: 1568 pages used for memmap
  1360. <7>[ 0.000000] c0 Normal zone: 0 pages reserved
  1361. <7>[ 0.000000] c0 Normal zone: 199136 pages, LIFO batch:31
  1362. <7>[ 0.000000] c0 HighMem zone: 2528 pages used for memmap
  1363. <7>[ 0.000000] c0 HighMem zone: 320032 pages, LIFO batch:31
  1364. <6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
  1365. <6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c23d6000 s8768 r8192 d15808 u32768
  1366. <7>[ 0.000000] c0 pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
  1367. <7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
  1368. <6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 519168
  1369. <5>[ 0.000000] c0 Kernel command line: console=ttySAC3,115200 consoleblank=0 androidboot.hardware=smdk4x12 androidboot.selinux=permissive console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=2fba02cab31e3f6c2923b303211b8a65 connie=SM-T310_OPEN_EUR_8fb00f1935619a5b1d035a8c123c20be androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000
  1370. <6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:13568 sec_log_buf:fd200000 sec_log_size:2097152
  1371. <6>[ 0.000000] c0 sec_log_save_old: saved old log at 79208@c23e6180
  1372. <6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
  1373. <6>[ 0.000000] c0 tima :sec_tima_log_setup, base:46202000, size:200000
  1374. <6>[ 0.000000] c0 sec_avc_log_setup: *sec_avc_log_ptr:1dff6 sec_avc_log_buf:c6404000 sec_log_size:0x40000
  1375. <6>[ 0.000000] c0 get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:4
  1376. <6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  1377. <6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1378. <6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1379. <6>[ 0.000000] c0 allocated 8388608 bytes of page_cgroup
  1380. <6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
  1381. <6>[ 0.000000] c0 Memory: 1020MB 1024MB = 2044MB total
  1382. <5>[ 0.000000] c0 Memory: 1315736k/1315736k available, 777320k reserved, 765952K highmem
  1383. <5>[ 0.000000] c0 Virtual kernel memory layout:
  1384. <5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1385. <5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1386. <5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
  1387. <5>[ 0.000000] c0 vmalloc : 0xf1800000 - 0xfc000000 ( 168 MB)
  1388. <5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xf1000000 ( 784 MB)
  1389. <5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1390. <5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1391. <5>[ 0.000000] c0 .init : 0xc0008000 - 0xc004d000 ( 276 kB)
  1392. <5>[ 0.000000] c0 .text : 0xc004d000 - 0xc0a15000 (10016 kB)
  1393. <5>[ 0.000000] c0 .data : 0xc0a16000 - 0xc0bb0b10 (1643 kB)
  1394. <5>[ 0.000000] c0 .bss : 0xc0bb0b34 - 0xc0fde868 (4280 kB)
  1395. <6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  1396. <6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
  1397. <6>[ 0.000000] c0 NR_IRQS:501
  1398. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  1399. <6>[ 0.000000] c0 Console: colour dummy device 80x30
  1400. <6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
  1401. <6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
  1402. <6>[ 0.000000] c0 Security Framework initialized
  1403. <6>[ 0.000000] c0 AppArmor: AppArmor initialized
  1404. <6>[ 0.000000] c0 Mount-cache hash table entries: 512
  1405. <6>[ 0.000000] c0 Initializing cgroup subsys debug
  1406. <6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
  1407. <6>[ 0.000000] c0 Initializing cgroup subsys memory
  1408. <6>[ 0.000000] c0 Initializing cgroup subsys devices
  1409. <6>[ 0.000000] c0 Initializing cgroup subsys freezer
  1410. <6>[ 0.000000] c0 Initializing cgroup subsys blkio
  1411. <6>[ 0.000000] c0 Initializing cgroup subsys perf_event
  1412. <6>[ 0.000000] c0 Initializing cgroup subsys bfqio
  1413. <6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
  1414. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  1415. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  1416. <6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  1417. <6>[ 0.000000] c0 L310 cache controller enabled
  1418. <6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c7, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  1419. <4>[ 0.030000] c1 CPU1: Booted secondary processor
  1420. <6>[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
  1421. <6>[ 0.040000] c0 Brought up 2 CPUs
  1422. <6>[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
  1423. <6>[ 0.040000] c0 devtmpfs: initialized
  1424. <3>[ 0.045000] c0 gpio: GPK0 has missing PM functions
  1425. <6>[ 0.045000] c0 print_constraints: dummy:
  1426. <6>[ 0.050000] c0 NET: Registered protocol family 16
  1427. <7>[ 0.050000] c0 migrating range 70000 70280, retry (0)
  1428. <6>[ 0.080000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
  1429. <6>[ 0.085000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
  1430. <6>[ 0.085000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
  1431. <7>[ 0.085000] c0 midas_config_gpio_table
  1432. <6>[ 0.085000] c0 midas_power_init
  1433. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] state : init
  1434. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] --
  1435. <6>[ 0.085000] c0 [gpio_dvs_check_initgpio] !!!
  1436. <6>[ 0.085000] c0 [TSP] midas_tsp_init() is called
  1437. <6>[ 0.085000] c0 Registered chained gpio int handler for interrupt 111.
  1438. <6>[ 0.085000] c0 Registered interrupt support for gpio group 2.
  1439. <6>[ 0.085000] c0 tab3_tsp_init touch irq : 388 (6)
  1440. <6>[ 0.085000] c0 TSP ID : 0
  1441. <6>[ 0.085000] c0 touch panel : 0
  1442. <6>[ 0.085000] c0 Sound: start midas_sound_init
  1443. <6>[ 0.085000] c0 midas_machine_init() register sii9234 driver
  1444. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=0
  1445. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init tune_mask=0x3800, tune=0x2800
  1446. <6>[ 0.085000] c0 exynos_slim8_charger_init: tab3 charger init
  1447. <4>[ 0.085000] c0 brcm_wlan_init: start
  1448. <4>[ 0.085000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
  1449. <4>[ 0.085000] c0 -----------------------------------------------------
  1450. <4>[ 0.085000] c0 -----------------------------------------------------
  1451. <4>[ 0.085000] c0 -----------------------------------------------------
  1452. <4>[ 0.085000] c0 regist ret:0
  1453. <3>[ 0.085000] c0 ram_console: invalid start 0 or end 0
  1454. <6>[ 0.090000] c0 exynos4_exynos4212_mfd_init
  1455. <3>[ 0.090000] c0 irda_device_init called!
  1456. <6>[ 0.090000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  1457. <6>[ 0.090000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  1458. <6>[ 0.090000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
  1459. <6>[ 0.090000] c0 exynos4_pmu_init: PMU supports 4212(104)
  1460. <6>[ 0.090000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
  1461. <6>[ 0.090000] c0 EXYNOS4: Initializing architecture
  1462. <4>[ 0.095000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
  1463. <6>[ 0.095000] c0 s3c-adc samsung-adc-v4: attached adc driver
  1464. <6>[ 0.095000] c0 samsung-pd samsung-pd.0: power domain registered
  1465. <6>[ 0.095000] c0 samsung-pd samsung-pd.1: power domain registered
  1466. <6>[ 0.095000] c0 samsung-pd samsung-pd.2: power domain registered
  1467. <6>[ 0.095000] c0 lcd0 disable skip only one time
  1468. <6>[ 0.095000] c0 samsung-pd samsung-pd.5: power domain registered
  1469. <6>[ 0.095000] c0 samsung-pd samsung-pd.4: power domain registered
  1470. <6>[ 0.095000] c0 samsung-pd samsung-pd.6: power domain registered
  1471. <6>[ 0.095000] c0 samsung-pd samsung-pd.7: power domain registered
  1472. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
  1473. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
  1474. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
  1475. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
  1476. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
  1477. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
  1478. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
  1479. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
  1480. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
  1481. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
  1482. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
  1483. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
  1484. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
  1485. <6>[ 0.105000] c0 bio: create slab <bio-0> at 0
  1486. <6>[ 0.105000] c0 print_constraints: VBATT: 5000 mV
  1487. <5>[ 0.105000] c0 SCSI subsystem initialized
  1488. <6>[ 0.105000] c0 usbcore: registered new interface driver usbfs
  1489. <6>[ 0.105000] c0 usbcore: registered new interface driver hub
  1490. <6>[ 0.105000] c0 usbcore: registered new device driver usb
  1491. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
  1492. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
  1493. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
  1494. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
  1495. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
  1496. <6>[ 0.110000] c0 i2c-gpio i2c-gpio.24: using pins 284 (SDA) and 283 (SCL)
  1497. <6>[ 0.110000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0
  1498. <6>[ 0.180000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe
  1499. <6>[ 0.185000] c0 print_constraints: safeout1 range: at 4900 mV
  1500. <6>[ 0.185000] c0 print_constraints: safeout2 range: at 4900 mV
  1501. <6>[ 0.185000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 1800 mA
  1502. <6>[ 0.185000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)
  1503. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  1504. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  1505. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  1506. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
  1507. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
  1508. <3>[ 0.185000] c0 s3c-i2c s3c2440-i2c.6: no platform data
  1509. <4>[ 0.185000] c0 s3c-i2c: probe of s3c2440-i2c.6 failed with error -22
  1510. <7>[ 0.190000] c0 s5m8767_pmic_probe: PMIC DEVICE ID=> 0x5
  1511. <6>[ 0.200000] c0 print_constraints: vdd_mif range: 850 <--> 1100 mV at 1050 mV
  1512. <6>[ 0.200000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
  1513. <6>[ 0.200000] c0 print_constraints: vdd_int range: 850 <--> 1300 mV at 1000 mV
  1514. <6>[ 0.200000] c0 print_constraints: vdd_g3d range: 850 <--> 1150 mV at 1000 mV
  1515. <6>[ 0.200000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
  1516. <6>[ 0.205000] c0 print_constraints: VCC_1.8V_AP: 1800 mV
  1517. <6>[ 0.205000] c0 print_constraints: VCC_3.3V_MHL: 3300 mV
  1518. <6>[ 0.210000] c0 print_constraints: VMIPI_1.0V: 1000 mV
  1519. <6>[ 0.210000] c0 print_constraints: VSIL_1.2V: 1200 mV
  1520. <6>[ 0.210000] c0 print_constraints: VMIPI_1.8V: 1800 mV
  1521. <6>[ 0.210000] c0 print_constraints: VCC_1.8V_MHL: 1800 mV
  1522. <6>[ 0.215000] c0 print_constraints: VLED_IC_1.9V: 1900 mV
  1523. <6>[ 0.215000] c0 print_constraints: VTOUCH_3.3V: 3300 mV
  1524. <6>[ 0.215000] c0 print_constraints: TSP_VDD_3.3V: 3300 mV
  1525. <6>[ 0.220000] c0 print_constraints: 5M_AF_2.8V: 2800 mV
  1526. <6>[ 0.220000] c0 print_constraints: VTF_2.8V: 2800 mV
  1527. <6>[ 0.220000] c0 print_constraints: LEDA_2.8V: 2800 mV
  1528. <6>[ 0.220000] c0 print_constraints: TSP_VDD_1.8V: 1800 mV
  1529. <6>[ 0.225000] c0 print_constraints: CAM_IO_1.8V: 1800 mV
  1530. <6>[ 0.225000] c0 print_constraints: VTCAM_1.8V: 1800 mV
  1531. <6>[ 0.225000] c0 s5m87xx 7-0066: S5M87xx MFD probe done!!!
  1532. <6>[ 0.225000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  1533. <6>[ 0.225000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
  1534. <6>[ 0.225000] c0 Bluetooth: Core ver 2.16
  1535. <6>[ 0.225000] c0 NET: Registered protocol family 31
  1536. <6>[ 0.225000] c0 Bluetooth: HCI device and connection manager initialized
  1537. <6>[ 0.225000] c0 Bluetooth: HCI socket layer initialized
  1538. <6>[ 0.225000] c0 Bluetooth: L2CAP socket layer initialized
  1539. <6>[ 0.225000] c0 Bluetooth: SCO socket layer initialized
  1540. <6>[ 0.225000] c0 cfg80211: Calling CRDA to update world regulatory domain
  1541. <6>[ 0.225000] c0 NetLabel: Initializing
  1542. <6>[ 0.225000] c0 NetLabel: domain hash size = 128
  1543. <6>[ 0.225000] c0 NetLabel: protocols = UNLABELED CIPSOv4
  1544. <6>[ 0.225000] c0 NetLabel: unlabeled traffic allowed by default
  1545. <6>[ 0.225000] c0 Switching to clocksource mct-frc
  1546. <6>[ 0.225740] c0 Switched to NOHz mode on CPU #0
  1547. <6>[ 0.226161] c1 Switched to NOHz mode on CPU #1
  1548. <6>[ 0.239953] c0 AppArmor: AppArmor Filesystem Enabled
  1549. <6>[ 0.249144] c0 NET: Registered protocol family 2
  1550. <6>[ 0.249464] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  1551. <6>[ 0.250501] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  1552. <6>[ 0.252459] c0 TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  1553. <6>[ 0.255788] c0 TCP: Hash tables configured (established 131072 bind 65536)
  1554. <6>[ 0.255831] c0 TCP reno registered
  1555. <6>[ 0.255872] c0 UDP hash table entries: 512 (order: 3, 32768 bytes)
  1556. <6>[ 0.255979] c0 UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  1557. <6>[ 0.256578] c0 NET: Registered protocol family 1
  1558. <6>[ 0.256869] c0 Trying to unpack rootfs image as initramfs...
  1559. <6>[ 0.503590] c0 Freeing initrd memory: 3924K
  1560. <6>[ 0.503751] c0 PMU: registered new PMU device of type 0
  1561. <6>[ 0.504019] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1562. <6>[ 0.504226] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1563. <6>[ 0.504334] c0 Exynos4 : ARM Clock down on idle mode is enabled
  1564. <6>[ 0.505698] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
  1565. <6>[ 0.505818] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
  1566. <6>[ 0.505935] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
  1567. <6>[ 0.506053] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
  1568. <6>[ 0.506172] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
  1569. <6>[ 0.506209] c0 accel_gpio_init
  1570. <6>[ 0.506336] c0 i2c 1-0019: i2c_add_devices - added k3dh successfully
  1571. <6>[ 0.506451] c0 i2c 9-0010: i2c_add_devices - added cm3323 successfully
  1572. <6>[ 0.506568] c0 i2c 10-002e: i2c_add_devices - added yas532 successfully
  1573. <6>[ 0.507362] c0 wake enabled for irq 374
  1574. <6>[ 0.507505] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  1575. <7>[ 0.508188] c0 migrating range 70280 70281, retry (0)
  1576. <6>[ 0.523699] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
  1577. <6>[ 0.523736] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  1578. <7>[ 0.523992] c0 migrating range 70281 70282, retry (0)
  1579. <6>[ 0.539325] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
  1580. <6>[ 0.539361] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  1581. <7>[ 0.539619] c0 migrating range 70282 70283, retry (0)
  1582. <6>[ 0.554894] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
  1583. <6>[ 0.554929] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  1584. <6>[ 0.555337] c0 audit: initializing netlink socket (enabled)
  1585. <4>[ 0.563928] c0 highmem bounce pool size: 64 pages
  1586. <6>[ 0.564250] c0 ashmem: initialized
  1587. <6>[ 0.573903] c0 exFAT: Core Version 1.2.9
  1588. <6>[ 0.573929] c0 exFAT: FS Version 1.2.9
  1589. <6>[ 0.575430] c0 Registering sdcardfs 0.1
  1590. <6>[ 0.575810] c0 fuse init (API version 7.16)
  1591. <6>[ 0.576657] c0 msgmni has been set to 1209
  1592. <6>[ 0.577004] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1593. <6>[ 0.577216] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1594. <6>[ 0.577371] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1595. <6>[ 0.577561] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1596. <6>[ 0.577747] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1597. <6>[ 0.577902] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1598. <6>[ 0.578059] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1599. <6>[ 0.578252] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1600. <6>[ 0.578537] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1601. <6>[ 0.578712] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1602. <6>[ 0.578914] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1603. <6>[ 0.579622] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1604. <6>[ 0.579839] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1605. <6>[ 0.580008] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1606. <6>[ 0.580050] c1 FIPS: No test for stdrng (krng)
  1607. <6>[ 0.580136] c0 io scheduler noop registered (default)
  1608. <6>[ 0.580166] c0 io scheduler deadline registered
  1609. <6>[ 0.580192] c0 io scheduler row registered
  1610. <6>[ 0.580490] c0 io scheduler cfq registered
  1611. <6>[ 0.580734] c0 io scheduler bfq registered
  1612. <6>[ 0.580758] c0 BFQ I/O-scheduler: v7r8
  1613. <6>[ 0.580782] c0 io scheduler sio registered
  1614. <6>[ 0.580807] c0 io scheduler vr registered
  1615. <6>[ 0.580830] c0 start plist test
  1616. <6>[ 0.590939] c0 end plist test
  1617. <6>[ 0.593347] c0 s3cfb s3cfb.0: src_clk=800000000, vclk=72161280, div=11(10), rate=79999999
  1618. <6>[ 0.593504] c0 set mdnie_pwm sclk rate to 2181818
  1619. <6>[ 0.593533] c0 set mdnie_pwm sclk rate to 12000000
  1620. <6>[ 0.593566] c0 s3cfb s3cfb.0: fimd sclk rate 72727272, clkdiv 0xff1baa
  1621. <6>[ 0.593728] c0 s3cfb s3cfb.0: fifo underrun trace
  1622. <6>[ 0.594017] c0 s3cfb s3cfb.0: [fb0] win2: dma: 0x6f700000, cpu: 0xf18b9000, size: 0x007d0000
  1623. <6>[ 0.599295] c0 sec_getlog_supply_fbinfo: 0x6f700000 800 1280 32 2
  1624. <6>[ 0.606936] c0 Bootloader sent 'bootloaderfb' : 5EC00000
  1625. <6>[ 0.607801] c0 s3cfb s3cfb.0: parent clock: 72727272, vclk: 72165000, vclk div: 1
  1626. <6>[ 0.608048] c0 s3cfb s3cfb.0: registered successfully
  1627. <6>[ 0.608450] c0 mdnie mdnie: lcdtype: 1
  1628. <6>[ 0.608492] c0 mdnie mdnie: standard_ui
  1629. <6>[ 0.608516] c0 mdnie mdnie: registered successfully
  1630. <6>[ 0.608643] c0 s5p_dsim_mipi_power_control: enable=1
  1631. <6>[ 0.609780] c0 lcd_power_on: enable=1
  1632. <6>[ 0.624762] c0 s5p-dsim s5p-dsim.0: rxhd : 2005e11
  1633. <6>[ 0.641877] c0 s5p-dsim s5p-dsim.0: rxhd : 3e008c11
  1634. <6>[ 0.658984] c0 s5p-dsim s5p-dsim.0: rxhd : 32001011
  1635. <6>[ 0.659148] c0 lcd panel: ID: 5e, 8c, 10
  1636. <6>[ 0.659175] c0 lcd panel: s6d7aa0 lcd panel driver has been probed.
  1637. <6>[ 0.659220] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed
  1638. <6>[ 0.659613] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  1639. <6>[ 0.880288] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
  1640. <6>[ 0.960098] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
  1641. <6>[ 1.040107] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
  1642. <6>[ 1.120096] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
  1643. <6>[ 1.174702] c0 console [ttySAC3] enabled
  1644. <4>[ 1.230265] c0 Mali: :::exynos_result_of_asv : 0
  1645. <4>[ 1.230297] c0 Mali: mali_dvfs[0].vol = 950000
  1646. <4>[ 1.230328] c0 Mali: :::exynos_result_of_asv : 0
  1647. <4>[ 1.230356] c0 Mali: mali_dvfs[1].vol = 975000
  1648. <4>[ 1.230384] c0 Mali: mali_runtime_resume.vol = 975000
  1649. <4>[ 1.230416] c0 Mali: :::exynos_result_of_asv : 0
  1650. <4>[ 1.230444] c0 Mali: mali_dvfs[2].vol = 1025000
  1651. <4>[ 1.230472] c0 Mali: :::exynos_result_of_asv : 0
  1652. <4>[ 1.230500] c0 Mali: mali_dvfs[3].vol = 1100000
  1653. <4>[ 1.230528] c0 Mali: init_gpu_vol = 1100000
  1654. <4>[ 1.230938] c0 Mali: init_mali_clock mali_clock c0b0cab0
  1655. <7>[ 1.233859] c0 migrating range 70300 70700, retry (0)
  1656. <4>[ 1.262232] c0 Mali: Mali device driver loaded
  1657. <4>[ 1.262447] c0 UMP: UMP device driver 0000 loaded
  1658. <6>[ 1.262481] c0 func:max77693_muic_init
  1659. <6>[ 1.262618] c0 func:max77693_muic_probe
  1660. <6>[ 1.262651] c0 max77693-muic max77693-muic: adc:0 chgtype:0, adc1k:0
  1661. <6>[ 1.262687] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART
  1662. <6>[ 1.262728] c0 max77693_muic_probe: switch_sel: 3
  1663. <6>[ 1.262904] c0 MUIC ret=0
  1664. <6>[ 1.262927] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2
  1665. <6>[ 1.264412] c0 max77693_muic_set_adcdbset: CNTL3: before:0x20 value:0x20 after:0x20
  1666. <6>[ 1.266053] c0 max77693-muic:max77693_muic_init_regs CONTROL[1:0x0, 2:0x3b, 3:0x20]
  1667. <6>[ 1.266097] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=6
  1668. <6>[ 1.266659] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0
  1669. <6>[ 1.267223] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0
  1670. <6>[ 1.267784] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0
  1671. <6>[ 1.277436] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445
  1672. <6>[ 1.278000] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9
  1673. <6>[ 1.278562] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11
  1674. <6>[ 1.279123] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0
  1675. <6>[ 1.279683] c0 max77693_set_jig_state: 0
  1676. <6>[ 1.286613] c0 brd: module loaded
  1677. <6>[ 1.289799] c0 loop: module loaded
  1678. <6>[ 1.289842] c0 lkdtm: No crash points registered, enable through debugfs
  1679. <6>[ 1.289979] c0 sec_jack_probe : Registering jack driver
  1680. <6>[ 1.290700] c0 wake enabled for irq 356
  1681. <6>[ 1.291210] c0 print_constraints: WM1811 LDO1: at 3000 mV
  1682. <6>[ 1.291538] c0 print_constraints: WM1811 LDO2: at 1050 mV
  1683. <6>[ 1.322885] c0 wm8994 4-001a: Succeeded to read ID register
  1684. <6>[ 1.329901] c0 wm8994 4-001a: WM1811 revision D CUST_ID 01
  1685. <4>[ 1.340492] c0 wm8994 4-001a: No interrupt specified, no interrupts
  1686. <6>[ 1.341363] c0 PPP generic driver version 2.4.2
  1687. <6>[ 1.341582] c0 PPP Deflate Compression module registered
  1688. <6>[ 1.341617] c0 PPP BSD Compression module registered
  1689. <6>[ 1.343864] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1690. <6>[ 1.343970] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  1691. <6>[ 1.344267] c0 PPP MPPE Compression module registered
  1692. <6>[ 1.344301] c0 NET: Registered protocol family 24
  1693. <6>[ 1.344334] c0 tun: Universal TUN/TAP device driver, 1.6
  1694. <6>[ 1.344365] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1695. <6>[ 1.344731] c0 host_notifier host_notifier.0: notifier_prove
  1696. <6>[ 1.345121] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1697. <6>[ 1.345340] c0 s5p-ehci s5p-ehci: usb phy usage(2)
  1698. <7>[ 1.345500] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  1699. <6>[ 1.345542] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
  1700. <6>[ 1.345762] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  1701. <7>[ 1.345946] c0 migrating range 70283 70284, retry (0)
  1702. <6>[ 1.363401] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
  1703. <6>[ 1.370061] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  1704. <6>[ 1.370188] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  1705. <6>[ 1.370229] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1706. <6>[ 1.370269] c0 usb usb1: Product: S5P EHCI Host Controller
  1707. <6>[ 1.370300] c0 usb usb1: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ehci_hcd
  1708. <6>[ 1.370337] c0 usb usb1: SerialNumber: s5p-ehci
  1709. <6>[ 1.370984] c0 hub 1-0:1.0: USB hub found
  1710. <6>[ 1.371022] c0 hub 1-0:1.0: 3 ports detected
  1711. <6>[ 1.371472] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1712. <6>[ 1.371692] c0 s5p-ohci s5p-ohci: usb phy usage(6)
  1713. <3>[ 1.371723] c0 s5p-ohci s5p-ohci: Already power on PHY
  1714. <7>[ 1.375433] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  1715. <6>[ 1.375473] c0 s5p-ohci s5p-ohci: s5p OHCI
  1716. <6>[ 1.375723] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  1717. <7>[ 1.375845] c0 migrating range 70284 70285, retry (0)
  1718. <6>[ 1.393047] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
  1719. <6>[ 1.449163] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1720. <6>[ 1.449207] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1721. <6>[ 1.449249] c0 usb usb2: Product: s5p OHCI
  1722. <6>[ 1.449274] c0 usb usb2: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ohci_hcd
  1723. <6>[ 1.449311] c0 usb usb2: SerialNumber: s5p-ohci
  1724. <6>[ 1.449971] c0 hub 2-0:1.0: USB hub found
  1725. <6>[ 1.450041] c0 hub 2-0:1.0: 3 ports detected
  1726. <6>[ 1.450560] c0 usbcore: registered new interface driver usblp
  1727. <6>[ 1.450593] c0 Initializing USB Mass Storage driver...
  1728. <6>[ 1.450714] c0 usbcore: registered new interface driver usb-storage
  1729. <6>[ 1.450749] c0 USB Mass Storage support registered.
  1730. <6>[ 1.450919] c0 usbcore: registered new interface driver usbserial
  1731. <6>[ 1.450954] c0 usbserial: USB Serial Driver core
  1732. <6>[ 1.451021] c0 USB Serial support registered for pl2303
  1733. <6>[ 1.451117] c0 usbcore: registered new interface driver pl2303
  1734. <6>[ 1.451149] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
  1735. <7>[ 1.451448] c0 migrating range 70285 70286, retry (0)
  1736. <6>[ 1.468715] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
  1737. <6>[ 1.468755] c0 s3c-udc : version 15 March 2009
  1738. <7>[ 1.468785] c0 init
  1739. <6>[ 1.469073] c0 usb: android_probe pdata: c0b23850
  1740. <6>[ 1.469103] c0 usb: android_probe nluns=0
  1741. <7>[ 1.469427] c0 usb: android_bind disconnect
  1742. <7>[ 1.469454] c0 usb: usb_gadget_disconnect
  1743. <7>[ 1.471128] c0 usb: mass_storage_function_init pdata->nluns=0, cdfs = 1
  1744. <7>[ 1.471172] c0 usb: usb_string_id cdev(0xedaec960)->next_string_id=1
  1745. <6>[ 1.471342] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
  1746. <6>[ 1.471383] c0 android_usb gadget: Number of LUNs=1
  1747. <6>[ 1.471416] c0 lun0: LUN: removable CD-ROM file: (no medium)
  1748. <7>[ 1.471951] c0 usb: usb_string_id cdev(0xedaec960)->next_string_id=2
  1749. <7>[ 1.471990] c0 usb: usb_string_id cdev(0xedaec960)->next_string_id=3
  1750. <7>[ 1.472031] c0 usb: usb_string_id cdev(0xedaec960)->next_string_id=4
  1751. <7>[ 1.472067] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
  1752. <7>[ 1.472099] c0 usb: composite_bind bcdDevice=0x0
  1753. <7>[ 1.472125] c0 usb: composite_bind composite_manufacturer=
  1754. <6>[ 1.472162] c0 android_usb gadget: android_usb ready
  1755. <6>[ 1.472189] c0 usb: Skip udc_enable
  1756. <6>[ 1.472525] c0 mousedev: PS/2 mouse device common for all mice
  1757. <6>[ 1.473239] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
  1758. <6>[ 1.473447] c0 wake enabled for irq 372
  1759. <6>[ 1.580059] c0 melfas-ts 3-0048: 0 panel
  1760. <3>[ 1.580086] c0 mms_reset excute
  1761. <6>[ 1.795158] c0 melfas-ts 3-0048: ILJIN panel
  1762. <6>[ 1.795437] c0 melfas-ts 3-0048: boot : 0x1, core : 0x76, config : 0x20
  1763. <6>[ 1.795686] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input1
  1764. <6>[ 1.796001] c0 s5p_gpioint_set_type irq:388 is at GPB(4)
  1765. <6>[ 1.798954] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_wtsr: enable WTSR
  1766. <6>[ 1.801618] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_smpl: disable SMPL
  1767. <6>[ 1.804734] c0 s5m_rtc_enable_smpl: WTSR_SMPL(0x40)
  1768. <6>[ 1.807083] c0 s5m_rtc_read_alarm: 2000/0/1 0:0:0(-1)
  1769. <6>[ 1.809042] c0 using rtc device, s5m-rtc, for alarms
  1770. <6>[ 1.809101] c0 s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0
  1771. <6>[ 1.809557] c0 s5m-rtc s5m-rtc: RTC CHIP NAME: s5m-rtc
  1772. <4>[ 1.809626] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  1773. <6>[ 1.810045] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
  1774. <6>[ 1.810180] c0 i2c /dev entries driver
  1775. <6>[ 1.811924] c0 Linux media interface: v0.10
  1776. <6>[ 1.812109] c0 lirc_dev: IR Remote Control driver registered, major 248
  1777. <6>[ 1.812148] c0 IR NEC protocol handler initialized
  1778. <6>[ 1.812177] c0 IR RC5(x) protocol handler initialized
  1779. <6>[ 1.812207] c0 IR RC6 protocol handler initialized
  1780. <6>[ 1.812237] c0 IR JVC protocol handler initialized
  1781. <6>[ 1.812265] c0 IR Sony protocol handler initialized
  1782. <6>[ 1.812294] c0 IR RC5 (streamzap) protocol handler initialized
  1783. <6>[ 1.812327] c0 IR LIRC bridge handler initialized
  1784. <6>[ 1.812354] c0 Linux video capture interface: v2.00
  1785. <6>[ 1.812408] c0 v4l2_i2c_drv_init: ISX012 init
  1786. <6>[ 1.812677] c0 v4l2_i2c_drv_init: SR130PC20 called
  1787. <6>[ 1.812943] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
  1788. <6>[ 1.813025] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
  1789. <2>[ 1.813118] c0 Initialize JPEG driver
  1790. <6>[ 1.815621] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  1791. <6>[ 1.815782] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  1792. <4>[ 1.815991] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
  1793. <6>[ 1.816215] c0 s5p_int_src_ext_hpd()
  1794. <6>[ 1.816244] c0 s5p_hpd_read_gpio(0)
  1795. <6>[ 1.816424] c0 s5p_hpd_read_gpio(0)
  1796. <6>[ 1.816680] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
  1797. <4>[ 1.816750] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
  1798. <4>[ 1.816786] c0 i2c-core: driver [s5p_ddc] using legacy resume method
  1799. <6>[ 1.817045] c0 mfc_init_mem_mgr[581] cma 0x58100000 0x5b200000 0x3100000 0x3100000 1
  1800. <6>[ 1.817101] c0 mfc_init_mem_mgr[641]: base 0x58100000, size 0x3100000, addr 0xd8100000
  1801. <6>[ 1.817418] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
  1802. <6>[ 1.817944] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
  1803. <6>[ 1.818412] c0 sii9234_cfg_gpio()
  1804. <6>[ 1.818465] c0 Registered interrupt support for gpio group 10.
  1805. <6>[ 1.818503] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  1806. <6>[ 1.818618] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
  1807. <6>[ 1.818897] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  1808. <6>[ 1.819017] c0 sii9234 : create mhl sysfile
  1809. <6>[ 1.819551] c0 input: sii9234_rcp as /devices/virtual/input/input2
  1810. <3>[ 1.870737] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  1811. <3>[ 1.877106] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  1812. <6>[ 1.884948] c0 wake enabled for irq 371
  1813. <7>[ 1.970035] c0 [keys] flip_cover_work : 1
  1814. <4>[ 1.993870] c0 i2c-core: driver [sec-fuelgauge] using legacy suspend method
  1815. <4>[ 1.993910] c0 i2c-core: driver [sec-fuelgauge] using legacy resume method
  1816. <6>[ 1.993963] c0 func:max77693_charger_init
  1817. <6>[ 1.994082] c0 max77693_charger_probe: MAX77693 Charger driver probe
  1818. <6>[ 1.997869] c0 max77693_get_health_state: battery is okaybut its voltage is low
  1819. <3>[ 2.000546] c0 power_supply sec-charger: driver failed to report `power_now' property
  1820. <6>[ 2.008035] c0 max77693_get_health_state: battery is okaybut its voltage is low
  1821. <3>[ 2.010726] c0 power_supply sec-charger: driver failed to report `power_now' property
  1822. <6>[ 2.011205] c1 sec-fuelgauge 14-0036: fg_check_status_reg: addr(0x00), data(0x0400)
  1823. <6>[ 2.012143] c1 sec-fuelgauge 14-0036: sec_fg_irq_thread: Fuel-alert alerted!
  1824. <6>[ 2.014461] c1 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Abnormal Current Consumption jump by -5 units
  1825. <6>[ 2.014513] c1 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Last Reported SOC (0).
  1826. <3>[ 2.014559] c1 sec_hal_fg_fuelalert_process: Fail to get psy (battery)
  1827. <6>[ 2.017791] c1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  1828. <6>[ 2.018206] c1 cpuidle: using governor ladder
  1829. <6>[ 2.023820] c1 cpuidle: using governor menu
  1830. <6>[ 2.023888] c1 mshci: Mobile Storage Host Controller Interface driver
  1831. <6>[ 2.023922] c1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
  1832. <6>[ 2.024125] c1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (13333333 Hz)
  1833. <3>[ 2.025429] c1 mmc0: Version ID 0x5342240a.
  1834. <6>[ 2.029367] c1 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
  1835. <6>[ 2.030800] c1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
  1836. <6>[ 2.030918] c1 sdhci: Secure Digital Host Controller Interface driver
  1837. <6>[ 2.030952] c1 sdhci: Copyright(c) Pierre Ossman
  1838. <6>[ 2.031101] c1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
  1839. <6>[ 2.031287] c1 mmc1: vtf_2.8v regulator found
  1840. <7>[ 2.031407] c1 Registered led device: mmc1::
  1841. <6>[ 2.033301] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
  1842. <6>[ 2.033357] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  1843. <6>[ 2.033584] c0 wake enabled for irq 380
  1844. <6>[ 2.033609] c0 mmc1: card removed.
  1845. <6>[ 2.033740] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
  1846. <3>[ 2.033827] c0 mmc2: no vmmc regulator found
  1847. <7>[ 2.036784] c0 Registered led device: mmc2::
  1848. <6>[ 2.036975] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  1849. <6>[ 2.039571] c0 usbcore: registered new interface driver usbhid
  1850. <6>[ 2.039603] c0 usbhid: USB HID core driver
  1851. <6>[ 2.040111] c0 logger: created 2048K log 'log_main'
  1852. <6>[ 2.040282] c0 logger: created 256K log 'log_events'
  1853. <6>[ 2.040430] c0 logger: created 1024K log 'log_radio'
  1854. <6>[ 2.040570] c0 logger: created 256K log 'log_system'
  1855. <6>[ 2.040603] c0 sec_getlog_supply_loggerinfo: 0xc0c18638 0xc0e18638 0xc0f18638 0xc0f58638
  1856. <6>[ 2.041608] c0 successful, position = 5
  1857. <6>[ 2.041813] c0 input: accelerometer as /devices/virtual/input/input3
  1858. <6>[ 2.042079] c0 Registered sensors device: accelerometer_sensor
  1859. <3>[ 2.042220] c0 geomagnetic_probe, is called
  1860. <6>[ 2.045207] c0 input: geomagnetic as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input4
  1861. <6>[ 2.045622] c0 input: geomagnetic_raw as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input5
  1862. <6>[ 2.045849] c0 geomagnetic_probe: set from board file.
  1863. <6>[ 2.045883] c0 geomagnetic_probe: yas magnetic position is 7
  1864. <6>[ 2.046214] c0 geomagnetic_probe: yamaha magnetic sensor id = 2
  1865. <4>[ 2.046358] c0 i2c-core: driver [yas532] using legacy suspend method
  1866. <4>[ 2.046393] c0 i2c-core: driver [yas532] using legacy resume method
  1867. <6>[ 2.046917] c0 input: orientation as /devices/virtual/input/input6
  1868. <6>[ 2.047188] c0 cm3323_i2c_probe is called.
  1869. <6>[ 2.047655] c0 cm3323_setup_reg is success.
  1870. <6>[ 2.047859] c0 input: light_sensor as /devices/virtual/input/input7
  1871. <6>[ 2.048245] c0 Registered sensors device: light_sensor
  1872. <6>[ 2.048291] c0 cm3323_i2c_probe is success.
  1873. <6>[ 2.048395] c0 ir_remocon_probe start!
  1874. <3>[ 2.060869] c0 mmc0: cmd 52 response timeout error
  1875. <3>[ 2.065033] c0 mmc0: cmd 52 response timeout error
  1876. <3>[ 2.073056] c0 mmc0: cmd 8 response timeout error
  1877. <3>[ 2.077134] c0 mmc0: cmd 5 response timeout error
  1878. <3>[ 2.081790] c0 mmc0: cmd 5 response timeout error
  1879. <3>[ 2.086477] c0 mmc0: cmd 5 response timeout error
  1880. <3>[ 2.091163] c0 mmc0: cmd 5 response timeout error
  1881. <3>[ 2.095905] c0 mmc0: cmd 55 response timeout error
  1882. <3>[ 2.100658] c0 mmc0: cmd 55 response timeout error
  1883. <3>[ 2.105428] c0 mmc0: cmd 55 response timeout error
  1884. <3>[ 2.110201] c0 mmc0: cmd 55 response timeout error
  1885. <6>[ 2.131843] c0 mmc0: MAG2GC: 1501004d41473247430035c8b06b60bd
  1886. <6>[ 2.205755] c0 8. irda_fw_update: chip : 0202, bin : 0202, latest FW_ver
  1887. <6>[ 2.239117] c0 mmc0 : 20 : 00 : 01400312 : 1400312.
  1888. <6>[ 2.239151] c0 mmc0 : enable PON feature : 20 : 00 : 01400312
  1889. <4>[ 2.247046] c0 mmc0: Voltage range not supported for power class.
  1890. <3>[ 2.247082] c0 mmc0: power class selection to bus width 8 failed
  1891. <4>[ 2.269027] c0 mmc0: Voltage range not supported for power class.
  1892. <3>[ 2.269064] c0 mmc0: power class selection to bus width 8 ddr 2 failed
  1893. <6>[ 2.274526] c0 mmc0: new high speed DDR MMC card at address 0001
  1894. <6>[ 2.274929] c0 mmcblk0: mmc0:0001 MAG2GC 14.6 GiB
  1895. <6>[ 2.287615] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
  1896. <6>[ 2.310202] c0 mckernelapi : Mobicore API module initialized!
  1897. <6>[ 2.310261] c0 mcdrvkmod mcd: MobiCore Driver, Build: Wed Feb 27 21:20:52 2019
  1898. <6>[ 2.310302] c0 mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
  1899. <6>[ 2.310339] c0 mcdrvkmod mcd: MobiCore *** SAMSUNG_Exynos4x12_Release_tbase-200_V005 ###
  1900. <6>[ 2.311163] c0 usbcore: registered new interface driver snd-usb-audio
  1901. <6>[ 2.312176] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
  1902. <6>[ 2.312324] c0 audss_init: RCLK SRC[busclk]
  1903. <7>[ 2.312934] c0 i2s_txctrl: Turn Off - spr is no active
  1904. <6>[ 2.325119] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
  1905. <4>[ 2.451983] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
  1906. <4>[ 2.452026] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
  1907. <6>[ 2.486338] c0 Sound: enabled mclk
  1908. <7>[ 2.486365] c0 pmu_debug: 0x00000900
  1909. <6>[ 2.496382] c0 Sound: state: 1, use_cnt: 1
  1910. <3>[ 2.498826] c0 wm8994-codec wm8994-codec: dapm: unknown pin FM In
  1911. <3>[ 2.503489] c0 wm8994-codec wm8994-codec: dapm: unknown pin Third Mic
  1912. <6>[ 2.517215] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
  1913. <6>[ 2.521997] c0 asoc: wm8994-aif2 <-> tab3.cp mapping ok
  1914. <6>[ 2.523236] c0 asoc: wm8994-aif3 <-> tab3.bt mapping ok
  1915. <7>[ 2.523342] c0 i2s_txctrl: Turn Off - spr is no active
  1916. <7>[ 2.524734] c0 migrating range 702a0 702c0, retry (0)
  1917. <7>[ 2.542818] c0 migrating range 702c0 702e0, retry (0)
  1918. <6>[ 2.560536] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
  1919. <6>[ 2.562138] c0 Samsung SRP driver, (c)2011 Samsung Electronics
  1920. <6>[ 2.563151] c0 ALSA device list:
  1921. <6>[ 2.563176] c0 #0: TAB3_WM1811
  1922. <6>[ 2.563334] c0 GACT probability NOT on
  1923. <6>[ 2.563365] c0 Mirror/redirect action on
  1924. <6>[ 2.563393] c0 u32 classifier
  1925. <6>[ 2.563411] c0 Actions configured
  1926. <6>[ 2.563436] c0 Netfilter messages via NETLINK v0.30.
  1927. <6>[ 2.563532] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  1928. <6>[ 2.564676] c0 ctnetlink v0.93: registering with nfnetlink.
  1929. <6>[ 2.564759] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1930. <6>[ 2.564798] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1931. <6>[ 2.565241] c0 xt_time: kernel timezone is -0000
  1932. <6>[ 2.567335] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
  1933. <6>[ 2.567648] c0 arp_tables: (C) 2002 David S. Miller
  1934. <6>[ 2.567741] c0 TCP cubic registered
  1935. <6>[ 2.567765] c0 Initializing XFRM netlink socket
  1936. <6>[ 2.568729] c0 NET: Registered protocol family 10
  1937. <6>[ 2.572111] c0 Mobile IPv6
  1938. <6>[ 2.572168] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
  1939. <6>[ 2.572617] c0 IPv6 over IPv4 tunneling driver
  1940. <6>[ 2.577883] c0 NET: Registered protocol family 17
  1941. <6>[ 2.577941] c0 NET: Registered protocol family 15
  1942. <5>[ 2.578201] c0 Bridge firewalling registered
  1943. <6>[ 2.578462] c0 Bluetooth: RFCOMM TTY layer initialized
  1944. <6>[ 2.578519] c0 Bluetooth: RFCOMM socket layer initialized
  1945. <6>[ 2.578553] c0 Bluetooth: RFCOMM ver 1.11
  1946. <6>[ 2.578579] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1947. <6>[ 2.578611] c0 Bluetooth: BNEP filters: protocol multicast
  1948. <6>[ 2.578643] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1949. <6>[ 2.578804] c0 NET: Registered protocol family 35
  1950. <5>[ 2.579120] c0 Registering the dns_resolver key type
  1951. <6>[ 2.579215] c0 EXYNOS4X12: Adaptive Support Voltage init
  1952. <6>[ 2.579248] c0 EXYNOS4X12(SG): ORIG : 0 MOD : 0 RESULT : 0
  1953. <6>[ 2.579292] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  1954. <5>[ 2.579363] c0 Registering SWP/SWPB emulation handler
  1955. <5>[ 2.579398] c0 Registering SDIV/UDIV emulation handler
  1956. <6>[ 2.579443] c0 DVFS : VDD_ARM Voltage table set with 0 Group
  1957. <6>[ 2.580197] c0 DVFS : VDD_INT Voltage table set with 0 Group
  1958. <6>[ 2.580507] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14
  1959. <6>[ 2.580553] c0 s5p_tmu_probe: cpufreq_level[14], busfreq_value[100100]
  1960. <6>[ 2.580588] c0 @@@ get_refresh_interval = 0x2e
  1961. <6>[ 2.580613] c0 @@@ get_refresh_interval = 0x5d
  1962. <6>[ 2.580646] c0 ** temperature set value **
  1963. <6>[ 2.580666] c0 1st throttling stop_temp = 78, start_temp = 80
  1964. <6>[ 2.580697] c0 2nd throttling stop_temp = 87, start_tmep = 103
  1965. <6>[ 2.580727] c0 tripping temp = 110, s/w emergency temp = 120
  1966. <6>[ 2.580758] c0 mem throttling stop_temp = 80, start_temp = 85
  1967. <6>[ 2.580792] c0 tc_voltage stop_temp = 13, start_temp = 10
  1968. <6>[ 2.584020] c0 zswap: loading zswap
  1969. <6>[ 2.584429] c0 zswap: using lzo compressor
  1970. <4>[ 2.590360] c0 regulator_init_complete: vdd_int range: incomplete constraints, leaving on
  1971. <4>[ 2.590941] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on
  1972. <4>[ 2.592026] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
  1973. <6>[ 2.593307] c0 s5m-rtc s5m-rtc: setting system clock to 2012-01-01 00:04:53 UTC (1325376293)
  1974. <7>[ 2.593441] c0 ctrl->mem.size = 0x1a00000
  1975. <7>[ 2.593467] c0 ctrl->mem.base = 0x6dd00000
  1976. <6>[ 2.593835] c0 FIMC0 registered successfully
  1977. <7>[ 2.594032] c0 ctrl->mem.size = 0x500000
  1978. <7>[ 2.594058] c0 ctrl->mem.base = 0x0
  1979. <6>[ 2.594307] c0 FIMC1 registered successfully
  1980. <7>[ 2.594476] c0 ctrl->mem.size = 0x0
  1981. <7>[ 2.594499] c0 ctrl->mem.base = 0x0
  1982. <6>[ 2.594775] c0 FIMC2 registered successfully
  1983. <7>[ 2.594966] c0 ctrl->mem.size = 0x0
  1984. <7>[ 2.594989] c0 ctrl->mem.base = 0xffffffea
  1985. <6>[ 2.595313] c0 FIMC3 registered successfully
  1986. <6>[ 2.595527] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
  1987. <6>[ 2.625652] c1 Freeing init memory: 276K
  1988. <0>[ 2.626647] c1 Kernel panic - not syncing: Attempted to kill init!
  1989. <4>[ 2.631405] c1 Backtrace:
  1990. <4>[ 2.634088] c1 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  1991. <4>[ 2.642771] c1 r7:ed842000 r6:c035e5e0 r5:c078f774 r4:c0bb3c48
  1992. <4>[ 2.648653] c1 [<c078e33c>] (dump_stack+0x0/0x24) from [<c078f61c>] (panic+0xac/0x204)
  1993. <4>[ 2.656576] c1 [<c078f570>] (panic+0x0/0x204) from [<c00a6078>] (complete_and_exit+0x0/0x2c)
  1994. <4>[ 2.664980] c1 r3:c078f570 r2:ed843dc0 r1:00000001 r0:c095630c
  1995. <4>[ 2.670864] c1 r7:ed842000
  1996. <4>[ 2.673649] c1 [<c00a5748>] (do_exit+0x0/0x930) from [<c00a6100>] (do_group_exit+0x44/0xe4)
  1997. <4>[ 2.682005] c1 r7:ed842000
  1998. <4>[ 2.684765] c1 [<c00a60bc>] (do_group_exit+0x0/0xe4) from [<c00b82dc>] (get_signal_to_deliver+0x374/0x594)
  1999. <4>[ 2.694407] c1 r7:ed842000 r6:ed22c608 r5:ed22c60c r4:ed842000
  2000. <4>[ 2.700300] c1 [<c00b7f68>] (get_signal_to_deliver+0x0/0x594) from [<c00572b0>] (do_signal+0x78/0x5b4)
  2001. <4>[ 2.709603] c1 [<c0057238>] (do_signal+0x0/0x5b4) from [<c0057b80>] (do_notify_resume+0x68/0x74)
  2002. <4>[ 2.718371] c1 [<c0057b18>] (do_notify_resume+0x0/0x74) from [<c0053c58>] (work_pending+0x24/0x28)
  2003. <4>[ 2.727305] c1 r4:0000040f r3:00000000
  2004. <2>[ 2.731147] c0 CPU0: stopping
  2005. <4>[ 2.734054] c0 Backtrace:
  2006. <4>[ 2.736760] c0 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  2007. <4>[ 2.745425] c0 r7:00000006 r6:c004b2d4 r5:c0b01480 r4:00000000
  2008. <4>[ 2.751340] c0 [<c078e33c>] (dump_stack+0x0/0x24) from [<c004d73c>] (do_IPI+0x354/0x374)
  2009. <4>[ 2.759408] c0 [<c004d3e8>] (do_IPI+0x0/0x374) from [<c0053580>] (__irq_svc+0x80/0x160)
  2010. <4>[ 2.767387] c0 Exception stack(0xc0a17ea0 to 0xc0a17ee8)
  2011. <4>[ 2.772687] c0 7ea0: b241d173 4effa325 026eea1a 0009bba8 c0bb128c c00d2aa8 c23d61b8 c0a16020
  2012. <4>[ 2.781106] c0 7ec0: c23d61c8 c0c178b0 00000000 c0a17f1c 4effa325 c0a17ee8 c00d29a8 c006c284
  2013. <4>[ 2.789521] c0 7ee0: 80000013 ffffffff
  2014. <4>[ 2.793268] c0 [<c006c234>] (exynos4_enter_idle+0x0/0x1c8) from [<c05269c8>] (cpuidle_idle_call+0xdc/0x36c)
  2015. <4>[ 2.802974] c0 r8:c23d61c8 r7:c0a16020 r6:c23d61b8 r5:00000000 r4:c0bb0c04
  2016. <4>[ 2.809925] c0 [<c05268ec>] (cpuidle_idle_call+0x0/0x36c) from [<c0054d18>] (cpu_idle+0x13c/0x174)
  2017. <4>[ 2.818871] c0 [<c0054bdc>] (cpu_idle+0x0/0x174) from [<c077c9bc>] (rest_init+0xf0/0xf4)
  2018. <4>[ 2.826940] c0 [<c077c8cc>] (rest_init+0x0/0xf4) from [<c0008d04>] (start_kernel+0x5b0/0x5bc)
  2019. <4>[ 2.835437] c0 r4:c0b014ac r3:c077c8cc
  2020. <4>[ 2.839262] c0 [<c0008754>] (start_kernel+0x0/0x5bc) from [<40008040>] (0x40008040)
  2021. <6>[ 2.846905] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
  2022. <0>[ 2.853516] c1 Rebooting in 1 seconds..
  2023. <0>[ 3.855536] c1 sec_reboot (104, emergency)
  2024.  
  2025. Samsung S-Boot 4.0 for SM-T310 (Feb 16 2017 - 16:22:56)
  2026.  
  2027. EXYNOS4212(EVT 1.0) / 2044MB / 0MB / Rev 6 / T310XXSBQB5 /(PKG_ID 0x500f028)
  2028.  
  2029. BOOTLOADER VERSION : T310XXSBQB5
  2030.  
  2031. PMIC rev = PASS2(4)
  2032. CHECK PWROFFSRC = 0x00
  2033. CHECK RTC PWROFFSRC = 0x00
  2034. [s5m8767] update LDO2 onoff[1]
  2035. [s5m8767] update LDO4 onoff[1]
  2036. [s5m8767] update LDO5 onoff[0]
  2037. [s5m8767] update LDO6 onoff[1]
  2038. [s5m8767] update LDO7 onoff[1]
  2039. [s5m8767] update LDO8 onoff[1]
  2040. [s5m8767] update LDO9 vol[1800]
  2041. [s5m8767] update LDO10 onoff[1]
  2042. [s5m8767] update LDO11 vol[1950], onoff[1]
  2043. [s5m8767] update LDO12 onoff[1]
  2044. [s5m8767] update LDO13 onoff[0]
  2045. [s5m8767] update LDO14 vol[1950], onoff[1]
  2046. [s5m8767] update LDO15 onoff[1]
  2047. [s5m8767] update LDO16 onoff[1]
  2048. [s5m8767] update LDO19 vol[1900]
  2049. [s5m8767] update LDO20 vol[3300]
  2050. [s5m8767] update LDO21 vol[3300]
  2051. [s5m8767] update LDO22 vol[2800]
  2052. [s5m8767] update LDO27 vol[1500]
  2053. cardtype: 0x00000007
  2054. SB_MMC_HS_52MHZ_1_8V_3V_IO
  2055. mmc->card_caps: 0x00000311
  2056. mmc->host_caps: 0x00000311
  2057. [mmc] capacity = 30777344
  2058. Current SBOOT version : VERSION_-+A1
  2059. - read_bl1
  2060. pit_check_signature (PIT) valid.
  2061. initialize_ddi_data: usable! (7:0xe)
  2062. [RPMB] emmc_rpmb_open:
  2063. Get DATA success.
  2064.  
  2065. [RPMB] emmc_rpmb_close:
  2066. initialize_rpmb_data: usable! (SM-T310:VERSION_-+A1)
  2067. PARAM ENV VERSION: v1.0..
  2068. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2069. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2070. set_charger_state: buck(1), chg(1), reg(0x05)
  2071. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2072. set_auto_current: ta_state(1), curr(1800)
  2073. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2074. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2075. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2076. set_charger_state: buck(1), chg(1), reg(0x05)
  2077. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2078. set_auto_current: ta_state(1), curr(1800)
  2079. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2080. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2081. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2082. set_charger_state: buck(1), chg(0), reg(0x04)
  2083. init_fuelgauge: Start!!
  2084. check_battery_type: ADC of the BATT_ID(728)
  2085. check_battery_type: BATTERY TYPE(0)
  2086. init_fuelgauge: Battery type : SDI
  2087. init_fuelgauge: FG Capacity(0x21f6), LearnCFG(0x77), CGain(0x3fa1)
  2088. get_CGAIN: CGain = 0x3fa1
  2089. init_fuelgauge: Already initialized (0x21f6, SDI type)
  2090. fuel_gauge_read_vfsoc: VFSOC(0), data(0x0000)
  2091. fuel_gauge_read_soc: SOC(0), data(0x00a2)
  2092. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2093. fuel_gauge_compensate_soc: Start!!
  2094. fuel_gauge_read_soc: SOC(0), data(0x00a2)
  2095. fuel_gauge_read_vcell: VCELL(3351), data(0xa790)
  2096. calculate_table_soc: Get table SOC in case of charging!!
  2097. calculate_table_soc: i(9), vcell(3351), table_soc(0)
  2098. differ(0), table_soc(0), RepSOC(0)
  2099. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2100. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2101. set_charger_state: buck(1), chg(1), reg(0x05)
  2102. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2103. set_auto_current: ta_state(1), curr(1800)
  2104. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2105. init_microusb_ic: before MUIC: CDETCTRL:0x2d
  2106. init_microusb_ic: after MUIC: CDETCTRL:0x2d
  2107. init_microusb_ic: MUIC: CONTROL1:0x00
  2108. init_microusb_ic: MUIC: CONTROL1:0x00
  2109. init_microusb_ic: MUIC: CONTROL2:0x3b
  2110. init_microusb_ic: MUIC: CONTROL2:0x3b
  2111. ====================
  2112. s5m8767 pmic register
  2113. ====================
  2114. ID = 0x05
  2115. ONSRC = 0x04
  2116. STATUS1 = 0x00
  2117. STATUS2 = 0x16
  2118. STATUS3 = 0x07
  2119. IRQ1 = 0x00
  2120. IRQ2 = 0x20
  2121. IRQ3 = 0x00
  2122. PWROFFSRC = 0x00
  2123. PMIC_RTC_WTSR_SMPL_REG = 0x00
  2124. S5M8767_REG_BUCHG = 0x6f
  2125. s5p_check_keypad: 0x10000000
  2126. s5p_check_reboot_mode: INFORM3 = 0 ... skip
  2127. s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
  2128. s5p_check_upload: debug level is 4f4c!
  2129. s5p_check_upload: level low or unknown: skip 0
  2130. s5p_check_download: 0
  2131. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2132. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2133. check_pm_status: normal reset, do not enter LPM mode.
  2134. AST_POWERON..
  2135. scr_draw_image: draw 'logo.jpg'...
  2136. read 'logo.jpg'(55175) completed.
  2137. cmu_div:10, div:1, src_clk:800000000, pixel_clk:72161280
  2138. s5p_dsim_display_config: VIDEO MODE
  2139. 5E, 8C, 10,
  2140. BL_ID : 3
  2141. <start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
  2142. <start_checksum:483>offset:50, size:6296
  2143. <start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:25
  2144. Not Need Movinand Checksum
  2145. Movinand Checksum Confirmation Pass
  2146. [mobi_drv] add: 0x43e51c40, size: 3933
  2147. MobiCore INIT response = 0
  2148. MobiCore RTM has initialized!
  2149. MobiCore IDLE flag = 0
  2150. MobiCore driver address 43e51c40, size = 3933
  2151. MobiCore RTM Notified back!
  2152. MobiCore Driver loaded and RTM IDLE!
  2153. MobiCore RTM has been uninitialized!
  2154. load_kernel: loading boot image from 147456..
  2155. Verify_Binary_Signature: failed.
  2156. pit_check_signature (BOOT) invalid.
  2157. Set invalid sign flag
  2158. No need to update kernel type.
  2159.  
  2160. SMC Num = 0x83000001
  2161.  
  2162. mobismc success!!! [ret = 0]
  2163. [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A1, rpmb_version:VERSION_-+A1
  2164. rpmb_version:49, cur_version:49
  2165. DDI value :0x0000000e
  2166. ATAG_CORE: 5 54410001 0 0 0
  2167. ATAG_MEM: 4 54410002 20000000 40000000
  2168. ATAG_MEM: 4 54410002 1FC00000 60000000
  2169. ATAG_MEM: 4 54410002 20000000 80000000
  2170. ATAG_MEM: 4 54410002 20000000 A0000000
  2171. ATAG_SERIAL: 4 54410006 430035c8 b06b60bd
  2172. ATAG_INITRD2: 4 54420005 42000000 3d5f2e
  2173. ATAG_REVISION: 3 54410007 6
  2174. ATAG_CMDLINE: a3 54410009 'console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=ac708349b259c45c658c67a757920a2b connie=SM-T310_OPEN_EUR_03f9f5560bb14228929cd904b6d0134d androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000'
  2175. ATAG_NONE: 0 0
  2176.  
  2177. Starting kernel at 0x40008000...
  2178.  
  2179. SWITCH_SEL(3)
  2180. <6>[ 0.000000] c0 Initializing cgroup subsys cpuset
  2181. <6>[ 0.000000] c0 Initializing cgroup subsys cpu
  2182. <5>[ 0.000000] c0 Linux version 3.0.31-kerNoleCM14.1+ (mika@arch-desktop) (gcc version 4.8 (GCC) ) #11 SMP PREEMPT Fri Mar 1 22:50:19 CET 2019
  2183. <4>[ 0.000000] c0 CPU: ARMv7 Processor [412fc098] revision 8 (ARMv7), cr=10c5387d
  2184. <4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  2185. <4>[ 0.000000] c0 Machine: SMDK4x12
  2186. <3>[ 0.000000] c0 exynos_page_hole_area_reserve: Reserved 0x80000000 ~ 0xc0000000 for marking page holes
  2187. <6>[ 0.000000] c0 cma: CMA: reserved 8 MiB at 65800000
  2188. <6>[ 0.000000] c0 cma: CMA: reserved 40 MiB at 58800000
  2189. <6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 70000000
  2190. <6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
  2191. <4>[ 0.000000] c0 CPU EXYNOS4212 (id 0x43220210)
  2192. <7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
  2193. <6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
  2194. <3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
  2195. <3>[ 0.000000] c0 audiocdclk: no parent clock specified
  2196. <3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
  2197. <7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
  2198. <7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
  2199. <6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
  2200. <6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
  2201. <6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
  2202. <6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
  2203. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  2204. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  2205. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  2206. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  2207. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  2208. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  2209. <6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
  2210. <6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
  2211. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  2212. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  2213. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  2214. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  2215. <6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 72727272
  2216. <6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
  2217. <6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 72727272
  2218. <6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
  2219. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  2220. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  2221. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
  2222. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
  2223. <6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
  2224. <6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
  2225. <6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
  2226. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6f700000/0x00800000 for 'fimd'
  2227. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dd00000/0x01a00000 for 'fimc0'
  2228. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dc00000/0x00100000 for 'srp'
  2229. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x60800000/0x00400000 for 'mfc-normal'
  2230. <6>[ 0.000000] c0 S5P/CMA: Reserving 0x8700000 for secure region aligned by 0x8000000.
  2231. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58000000/0x00100000 for 'sectbl'
  2232. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58100000/0x03100000 for 'mfc-secure'
  2233. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x5b200000/0x05500000 for 'ion'
  2234. <0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
  2235. <0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
  2236. <7>[ 0.000000] c0 On node 0 totalpages: 523264
  2237. <7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0b9b1a0, node_mem_map c0fdf000
  2238. <7>[ 0.000000] c0 Normal zone: 1568 pages used for memmap
  2239. <7>[ 0.000000] c0 Normal zone: 0 pages reserved
  2240. <7>[ 0.000000] c0 Normal zone: 199136 pages, LIFO batch:31
  2241. <7>[ 0.000000] c0 HighMem zone: 2528 pages used for memmap
  2242. <7>[ 0.000000] c0 HighMem zone: 320032 pages, LIFO batch:31
  2243. <6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
  2244. <6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c23d6000 s8768 r8192 d15808 u32768
  2245. <7>[ 0.000000] c0 pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
  2246. <7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
  2247. <6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 519168
  2248. <5>[ 0.000000] c0 Kernel command line: console=ttySAC3,115200 consoleblank=0 androidboot.hardware=smdk4x12 androidboot.selinux=permissive console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=ac708349b259c45c658c67a757920a2b connie=SM-T310_OPEN_EUR_03f9f5560bb14228929cd904b6d0134d androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000
  2249. <6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:20cb9 sec_log_buf:fd200000 sec_log_size:2097152
  2250. <6>[ 0.000000] c0 sec_log_save_old: saved old log at 134329@c23e6180
  2251. <6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
  2252. <6>[ 0.000000] c0 tima :sec_tima_log_setup, base:46202000, size:200000
  2253. <6>[ 0.000000] c0 sec_avc_log_setup: *sec_avc_log_ptr:1e2c9 sec_avc_log_buf:c6404000 sec_log_size:0x40000
  2254. <6>[ 0.000000] c0 get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:4
  2255. <6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  2256. <6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  2257. <6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  2258. <6>[ 0.000000] c0 allocated 8388608 bytes of page_cgroup
  2259. <6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
  2260. <6>[ 0.000000] c0 Memory: 1020MB 1024MB = 2044MB total
  2261. <5>[ 0.000000] c0 Memory: 1315684k/1315684k available, 777372k reserved, 765952K highmem
  2262. <5>[ 0.000000] c0 Virtual kernel memory layout:
  2263. <5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  2264. <5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  2265. <5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
  2266. <5>[ 0.000000] c0 vmalloc : 0xf1800000 - 0xfc000000 ( 168 MB)
  2267. <5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xf1000000 ( 784 MB)
  2268. <5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  2269. <5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  2270. <5>[ 0.000000] c0 .init : 0xc0008000 - 0xc004d000 ( 276 kB)
  2271. <5>[ 0.000000] c0 .text : 0xc004d000 - 0xc0a15000 (10016 kB)
  2272. <5>[ 0.000000] c0 .data : 0xc0a16000 - 0xc0bb0b10 (1643 kB)
  2273. <5>[ 0.000000] c0 .bss : 0xc0bb0b34 - 0xc0fde868 (4280 kB)
  2274. <6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  2275. <6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
  2276. <6>[ 0.000000] c0 NR_IRQS:501
  2277. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  2278. <6>[ 0.000000] c0 Console: colour dummy device 80x30
  2279. <6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
  2280. <6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
  2281. <6>[ 0.000000] c0 Security Framework initialized
  2282. <6>[ 0.000000] c0 AppArmor: AppArmor initialized
  2283. <6>[ 0.000000] c0 Mount-cache hash table entries: 512
  2284. <6>[ 0.000000] c0 Initializing cgroup subsys debug
  2285. <6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
  2286. <6>[ 0.000000] c0 Initializing cgroup subsys memory
  2287. <6>[ 0.000000] c0 Initializing cgroup subsys devices
  2288. <6>[ 0.000000] c0 Initializing cgroup subsys freezer
  2289. <6>[ 0.000000] c0 Initializing cgroup subsys blkio
  2290. <6>[ 0.000000] c0 Initializing cgroup subsys perf_event
  2291. <6>[ 0.000000] c0 Initializing cgroup subsys bfqio
  2292. <6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
  2293. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  2294. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  2295. <6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  2296. <6>[ 0.000000] c0 L310 cache controller enabled
  2297. <6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c7, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  2298. <4>[ 0.030000] c1 CPU1: Booted secondary processor
  2299. <6>[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
  2300. <6>[ 0.040000] c0 Brought up 2 CPUs
  2301. <6>[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
  2302. <6>[ 0.040000] c0 devtmpfs: initialized
  2303. <3>[ 0.045000] c0 gpio: GPK0 has missing PM functions
  2304. <6>[ 0.045000] c0 print_constraints: dummy:
  2305. <6>[ 0.050000] c0 NET: Registered protocol family 16
  2306. <7>[ 0.050000] c0 migrating range 70000 70280, retry (0)
  2307. <6>[ 0.080000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
  2308. <6>[ 0.085000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
  2309. <6>[ 0.085000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
  2310. <7>[ 0.085000] c0 midas_config_gpio_table
  2311. <6>[ 0.085000] c0 midas_power_init
  2312. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] state : init
  2313. <6>[ 0.085000] c0 [GPIO_DVS][check_gpio_status] --
  2314. <6>[ 0.085000] c0 [gpio_dvs_check_initgpio] !!!
  2315. <6>[ 0.085000] c0 [TSP] midas_tsp_init() is called
  2316. <6>[ 0.085000] c0 Registered chained gpio int handler for interrupt 111.
  2317. <6>[ 0.085000] c0 Registered interrupt support for gpio group 2.
  2318. <6>[ 0.085000] c0 tab3_tsp_init touch irq : 388 (6)
  2319. <6>[ 0.085000] c0 TSP ID : 0
  2320. <6>[ 0.085000] c0 touch panel : 0
  2321. <6>[ 0.085000] c0 Sound: start midas_sound_init
  2322. <6>[ 0.085000] c0 midas_machine_init() register sii9234 driver
  2323. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=0
  2324. <7>[ 0.085000] c0 usb: smdk4212_usbgadget_init tune_mask=0x3800, tune=0x2800
  2325. <6>[ 0.085000] c0 exynos_slim8_charger_init: tab3 charger init
  2326. <4>[ 0.085000] c0 brcm_wlan_init: start
  2327. <4>[ 0.085000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
  2328. <4>[ 0.085000] c0 -----------------------------------------------------
  2329. <4>[ 0.085000] c0 -----------------------------------------------------
  2330. <4>[ 0.085000] c0 -----------------------------------------------------
  2331. <4>[ 0.085000] c0 regist ret:0
  2332. <3>[ 0.085000] c0 ram_console: invalid start 0 or end 0
  2333. <6>[ 0.090000] c0 exynos4_exynos4212_mfd_init
  2334. <3>[ 0.090000] c0 irda_device_init called!
  2335. <6>[ 0.090000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  2336. <6>[ 0.090000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  2337. <6>[ 0.090000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
  2338. <6>[ 0.090000] c0 exynos4_pmu_init: PMU supports 4212(104)
  2339. <6>[ 0.090000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
  2340. <6>[ 0.090000] c0 EXYNOS4: Initializing architecture
  2341. <4>[ 0.095000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
  2342. <6>[ 0.095000] c0 s3c-adc samsung-adc-v4: attached adc driver
  2343. <6>[ 0.095000] c0 samsung-pd samsung-pd.0: power domain registered
  2344. <6>[ 0.095000] c0 samsung-pd samsung-pd.1: power domain registered
  2345. <6>[ 0.095000] c0 samsung-pd samsung-pd.2: power domain registered
  2346. <6>[ 0.095000] c0 lcd0 disable skip only one time
  2347. <6>[ 0.095000] c0 samsung-pd samsung-pd.5: power domain registered
  2348. <6>[ 0.095000] c0 samsung-pd samsung-pd.4: power domain registered
  2349. <6>[ 0.095000] c0 samsung-pd samsung-pd.6: power domain registered
  2350. <6>[ 0.095000] c0 samsung-pd samsung-pd.7: power domain registered
  2351. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
  2352. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
  2353. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
  2354. <6>[ 0.095000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
  2355. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
  2356. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
  2357. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
  2358. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
  2359. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
  2360. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
  2361. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
  2362. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
  2363. <6>[ 0.095000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
  2364. <6>[ 0.105000] c0 bio: create slab <bio-0> at 0
  2365. <6>[ 0.105000] c0 print_constraints: VBATT: 5000 mV
  2366. <5>[ 0.105000] c0 SCSI subsystem initialized
  2367. <6>[ 0.105000] c0 usbcore: registered new interface driver usbfs
  2368. <6>[ 0.105000] c0 usbcore: registered new interface driver hub
  2369. <6>[ 0.105000] c0 usbcore: registered new device driver usb
  2370. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
  2371. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
  2372. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
  2373. <6>[ 0.105000] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
  2374. <6>[ 0.110000] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
  2375. <6>[ 0.110000] c0 i2c-gpio i2c-gpio.24: using pins 284 (SDA) and 283 (SCL)
  2376. <6>[ 0.110000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0
  2377. <6>[ 0.180000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe
  2378. <6>[ 0.185000] c0 print_constraints: safeout1 range: at 4900 mV
  2379. <6>[ 0.185000] c0 print_constraints: safeout2 range: at 4900 mV
  2380. <6>[ 0.185000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 1800 mA
  2381. <6>[ 0.185000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)
  2382. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  2383. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  2384. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  2385. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
  2386. <6>[ 0.185000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
  2387. <3>[ 0.185000] c0 s3c-i2c s3c2440-i2c.6: no platform data
  2388. <4>[ 0.185000] c0 s3c-i2c: probe of s3c2440-i2c.6 failed with error -22
  2389. <7>[ 0.190000] c0 s5m8767_pmic_probe: PMIC DEVICE ID=> 0x5
  2390. <6>[ 0.200000] c0 print_constraints: vdd_mif range: 850 <--> 1100 mV at 1050 mV
  2391. <6>[ 0.200000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
  2392. <6>[ 0.200000] c0 print_constraints: vdd_int range: 850 <--> 1300 mV at 1000 mV
  2393. <6>[ 0.200000] c0 print_constraints: vdd_g3d range: 850 <--> 1150 mV at 1000 mV
  2394. <6>[ 0.200000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
  2395. <6>[ 0.205000] c0 print_constraints: VCC_1.8V_AP: 1800 mV
  2396. <6>[ 0.205000] c0 print_constraints: VCC_3.3V_MHL: 3300 mV
  2397. <6>[ 0.210000] c0 print_constraints: VMIPI_1.0V: 1000 mV
  2398. <6>[ 0.210000] c0 print_constraints: VSIL_1.2V: 1200 mV
  2399. <6>[ 0.210000] c0 print_constraints: VMIPI_1.8V: 1800 mV
  2400. <6>[ 0.215000] c0 print_constraints: VCC_1.8V_MHL: 1800 mV
  2401. <6>[ 0.215000] c0 print_constraints: VLED_IC_1.9V: 1900 mV
  2402. <6>[ 0.215000] c0 print_constraints: VTOUCH_3.3V: 3300 mV
  2403. <6>[ 0.215000] c0 print_constraints: TSP_VDD_3.3V: 3300 mV
  2404. <6>[ 0.220000] c0 print_constraints: 5M_AF_2.8V: 2800 mV
  2405. <6>[ 0.220000] c0 print_constraints: VTF_2.8V: 2800 mV
  2406. <6>[ 0.220000] c0 print_constraints: LEDA_2.8V: 2800 mV
  2407. <6>[ 0.220000] c0 print_constraints: TSP_VDD_1.8V: 1800 mV
  2408. <6>[ 0.225000] c0 print_constraints: CAM_IO_1.8V: 1800 mV
  2409. <6>[ 0.225000] c0 print_constraints: VTCAM_1.8V: 1800 mV
  2410. <6>[ 0.225000] c0 s5m87xx 7-0066: S5M87xx MFD probe done!!!
  2411. <6>[ 0.225000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  2412. <6>[ 0.225000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
  2413. <6>[ 0.225000] c0 Bluetooth: Core ver 2.16
  2414. <6>[ 0.225000] c0 NET: Registered protocol family 31
  2415. <6>[ 0.225000] c0 Bluetooth: HCI device and connection manager initialized
  2416. <6>[ 0.225000] c0 Bluetooth: HCI socket layer initialized
  2417. <6>[ 0.225000] c0 Bluetooth: L2CAP socket layer initialized
  2418. <6>[ 0.225000] c0 Bluetooth: SCO socket layer initialized
  2419. <6>[ 0.225000] c0 cfg80211: Calling CRDA to update world regulatory domain
  2420. <6>[ 0.225000] c0 NetLabel: Initializing
  2421. <6>[ 0.225000] c0 NetLabel: domain hash size = 128
  2422. <6>[ 0.225000] c0 NetLabel: protocols = UNLABELED CIPSOv4
  2423. <6>[ 0.225000] c0 NetLabel: unlabeled traffic allowed by default
  2424. <6>[ 0.225000] c0 Switching to clocksource mct-frc
  2425. <6>[ 0.225510] c0 Switched to NOHz mode on CPU #0
  2426. <6>[ 0.225936] c1 Switched to NOHz mode on CPU #1
  2427. <6>[ 0.239978] c0 AppArmor: AppArmor Filesystem Enabled
  2428. <6>[ 0.249170] c0 NET: Registered protocol family 2
  2429. <6>[ 0.249486] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  2430. <6>[ 0.250524] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  2431. <6>[ 0.252484] c0 TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  2432. <6>[ 0.255823] c0 TCP: Hash tables configured (established 131072 bind 65536)
  2433. <6>[ 0.255867] c0 TCP reno registered
  2434. <6>[ 0.255908] c0 UDP hash table entries: 512 (order: 3, 32768 bytes)
  2435. <6>[ 0.256017] c0 UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  2436. <6>[ 0.256614] c0 NET: Registered protocol family 1
  2437. <6>[ 0.256905] c0 Trying to unpack rootfs image as initramfs...
  2438. <6>[ 0.503397] c0 Freeing initrd memory: 3924K
  2439. <6>[ 0.503560] c0 PMU: registered new PMU device of type 0
  2440. <6>[ 0.503836] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2441. <6>[ 0.504045] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2442. <6>[ 0.504155] c0 Exynos4 : ARM Clock down on idle mode is enabled
  2443. <6>[ 0.505528] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
  2444. <6>[ 0.505647] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
  2445. <6>[ 0.505765] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
  2446. <6>[ 0.505882] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
  2447. <6>[ 0.506000] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
  2448. <6>[ 0.506037] c0 accel_gpio_init
  2449. <6>[ 0.506165] c0 i2c 1-0019: i2c_add_devices - added k3dh successfully
  2450. <6>[ 0.506280] c0 i2c 9-0010: i2c_add_devices - added cm3323 successfully
  2451. <6>[ 0.506398] c0 i2c 10-002e: i2c_add_devices - added yas532 successfully
  2452. <6>[ 0.507196] c0 wake enabled for irq 374
  2453. <6>[ 0.507339] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  2454. <7>[ 0.508020] c0 migrating range 70280 70281, retry (0)
  2455. <6>[ 0.523537] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
  2456. <6>[ 0.523574] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  2457. <7>[ 0.523830] c0 migrating range 70281 70282, retry (0)
  2458. <6>[ 0.539166] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
  2459. <6>[ 0.539202] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  2460. <7>[ 0.539460] c0 migrating range 70282 70283, retry (0)
  2461. <6>[ 0.554705] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
  2462. <6>[ 0.554741] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  2463. <6>[ 0.555154] c0 audit: initializing netlink socket (enabled)
  2464. <4>[ 0.563763] c0 highmem bounce pool size: 64 pages
  2465. <6>[ 0.564089] c0 ashmem: initialized
  2466. <6>[ 0.573713] c0 exFAT: Core Version 1.2.9
  2467. <6>[ 0.573739] c0 exFAT: FS Version 1.2.9
  2468. <6>[ 0.575204] c0 Registering sdcardfs 0.1
  2469. <6>[ 0.575583] c0 fuse init (API version 7.16)
  2470. <6>[ 0.576429] c0 msgmni has been set to 1209
  2471. <6>[ 0.576777] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2472. <6>[ 0.576982] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2473. <6>[ 0.577135] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2474. <6>[ 0.577298] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2475. <6>[ 0.577455] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2476. <6>[ 0.577613] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2477. <6>[ 0.577796] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2478. <6>[ 0.577988] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2479. <6>[ 0.578299] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2480. <6>[ 0.578501] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2481. <6>[ 0.578703] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2482. <6>[ 0.579439] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2483. <6>[ 0.579653] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2484. <6>[ 0.579822] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2485. <6>[ 0.579855] c1 FIPS: No test for stdrng (krng)
  2486. <6>[ 0.579920] c0 io scheduler noop registered (default)
  2487. <6>[ 0.579950] c0 io scheduler deadline registered
  2488. <6>[ 0.579976] c0 io scheduler row registered
  2489. <6>[ 0.580300] c0 io scheduler cfq registered
  2490. <6>[ 0.580547] c0 io scheduler bfq registered
  2491. <6>[ 0.580571] c0 BFQ I/O-scheduler: v7r8
  2492. <6>[ 0.580595] c0 io scheduler sio registered
  2493. <6>[ 0.580620] c0 io scheduler vr registered
  2494. <6>[ 0.580644] c0 start plist test
  2495. <6>[ 0.592473] c0 end plist test
  2496. <6>[ 0.594876] c0 s3cfb s3cfb.0: src_clk=800000000, vclk=72161280, div=11(10), rate=79999999
  2497. <6>[ 0.595067] c0 set mdnie_pwm sclk rate to 2181818
  2498. <6>[ 0.595096] c0 set mdnie_pwm sclk rate to 12000000
  2499. <6>[ 0.595134] c0 s3cfb s3cfb.0: fimd sclk rate 72727272, clkdiv 0xff1baa
  2500. <6>[ 0.595290] c0 s3cfb s3cfb.0: fifo underrun trace
  2501. <6>[ 0.595577] c0 s3cfb s3cfb.0: [fb0] win2: dma: 0x6f700000, cpu: 0xf18b9000, size: 0x007d0000
  2502. <6>[ 0.600854] c0 sec_getlog_supply_fbinfo: 0x6f700000 800 1280 32 2
  2503. <6>[ 0.608476] c0 Bootloader sent 'bootloaderfb' : 5EC00000
  2504. <6>[ 0.609343] c0 s3cfb s3cfb.0: parent clock: 72727272, vclk: 72165000, vclk div: 1
  2505. <6>[ 0.609578] c0 s3cfb s3cfb.0: registered successfully
  2506. <6>[ 0.609979] c0 mdnie mdnie: lcdtype: 1
  2507. <6>[ 0.610063] c0 mdnie mdnie: standard_ui
  2508. <6>[ 0.610087] c0 mdnie mdnie: registered successfully
  2509. <6>[ 0.610221] c0 s5p_dsim_mipi_power_control: enable=1
  2510. <6>[ 0.611347] c0 lcd_power_on: enable=1
  2511. <6>[ 0.620525] c0 s5p-dsim s5p-dsim.0: rxhd : 2005e11
  2512. <6>[ 0.637641] c0 s5p-dsim s5p-dsim.0: rxhd : 3e008c11
  2513. <6>[ 0.654748] c0 s5p-dsim s5p-dsim.0: rxhd : 32001011
  2514. <6>[ 0.654912] c0 lcd panel: ID: 5e, 8c, 10
  2515. <6>[ 0.654938] c0 lcd panel: s6d7aa0 lcd panel driver has been probed.
  2516. <6>[ 0.654982] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed
  2517. <6>[ 0.655396] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  2518. <6>[ 0.905286] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
  2519. <6>[ 0.985097] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
  2520. <6>[ 1.065107] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
  2521. <6>[ 1.145096] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
  2522. <6>[ 1.199696] c0 console [ttySAC3] enabled
  2523. <4>[ 1.255263] c0 Mali: :::exynos_result_of_asv : 0
  2524. <4>[ 1.255294] c0 Mali: mali_dvfs[0].vol = 950000
  2525. <4>[ 1.255323] c0 Mali: :::exynos_result_of_asv : 0
  2526. <4>[ 1.255351] c0 Mali: mali_dvfs[1].vol = 975000
  2527. <4>[ 1.255379] c0 Mali: mali_runtime_resume.vol = 975000
  2528. <4>[ 1.255409] c0 Mali: :::exynos_result_of_asv : 0
  2529. <4>[ 1.255438] c0 Mali: mali_dvfs[2].vol = 1025000
  2530. <4>[ 1.255466] c0 Mali: :::exynos_result_of_asv : 0
  2531. <4>[ 1.255494] c0 Mali: mali_dvfs[3].vol = 1100000
  2532. <4>[ 1.255522] c0 Mali: init_gpu_vol = 1100000
  2533. <4>[ 1.255931] c0 Mali: init_mali_clock mali_clock c0b0cab0
  2534. <7>[ 1.258847] c0 migrating range 70300 70700, retry (0)
  2535. <4>[ 1.287360] c0 Mali: Mali device driver loaded
  2536. <4>[ 1.287574] c0 UMP: UMP device driver 0000 loaded
  2537. <6>[ 1.287607] c0 func:max77693_muic_init
  2538. <6>[ 1.287737] c0 func:max77693_muic_probe
  2539. <6>[ 1.287768] c0 max77693-muic max77693-muic: adc:0 chgtype:0, adc1k:0
  2540. <6>[ 1.287803] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART
  2541. <6>[ 1.287843] c0 max77693_muic_probe: switch_sel: 3
  2542. <6>[ 1.288019] c0 MUIC ret=0
  2543. <6>[ 1.288042] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2
  2544. <6>[ 1.289522] c0 max77693_muic_set_adcdbset: CNTL3: before:0x20 value:0x20 after:0x20
  2545. <6>[ 1.291164] c0 max77693-muic:max77693_muic_init_regs CONTROL[1:0x0, 2:0x3b, 3:0x20]
  2546. <6>[ 1.291206] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=6
  2547. <6>[ 1.291767] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0
  2548. <6>[ 1.292330] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0
  2549. <6>[ 1.292892] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0
  2550. <6>[ 1.302542] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445
  2551. <6>[ 1.303107] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9
  2552. <6>[ 1.303669] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11
  2553. <6>[ 1.304233] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0
  2554. <6>[ 1.304793] c0 max77693_set_jig_state: 0
  2555. <6>[ 1.311729] c0 brd: module loaded
  2556. <6>[ 1.314933] c0 loop: module loaded
  2557. <6>[ 1.314977] c0 lkdtm: No crash points registered, enable through debugfs
  2558. <6>[ 1.315134] c0 sec_jack_probe : Registering jack driver
  2559. <6>[ 1.315815] c0 wake enabled for irq 356
  2560. <6>[ 1.316327] c0 print_constraints: WM1811 LDO1: at 3000 mV
  2561. <6>[ 1.316654] c0 print_constraints: WM1811 LDO2: at 1050 mV
  2562. <6>[ 1.348001] c0 wm8994 4-001a: Succeeded to read ID register
  2563. <6>[ 1.355034] c0 wm8994 4-001a: WM1811 revision D CUST_ID 01
  2564. <4>[ 1.365623] c0 wm8994 4-001a: No interrupt specified, no interrupts
  2565. <6>[ 1.366497] c0 PPP generic driver version 2.4.2
  2566. <6>[ 1.366713] c0 PPP Deflate Compression module registered
  2567. <6>[ 1.366746] c0 PPP BSD Compression module registered
  2568. <6>[ 1.368998] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2569. <6>[ 1.369105] c1 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  2570. <6>[ 1.369402] c0 PPP MPPE Compression module registered
  2571. <6>[ 1.369438] c0 NET: Registered protocol family 24
  2572. <6>[ 1.369472] c0 tun: Universal TUN/TAP device driver, 1.6
  2573. <6>[ 1.369501] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  2574. <6>[ 1.369865] c0 host_notifier host_notifier.0: notifier_prove
  2575. <6>[ 1.370263] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  2576. <6>[ 1.370480] c0 s5p-ehci s5p-ehci: usb phy usage(2)
  2577. <7>[ 1.370642] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  2578. <6>[ 1.370685] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
  2579. <6>[ 1.370900] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  2580. <7>[ 1.371082] c0 migrating range 70283 70284, retry (0)
  2581. <6>[ 1.388655] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
  2582. <6>[ 1.395054] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  2583. <6>[ 1.395183] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  2584. <6>[ 1.395225] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2585. <6>[ 1.395268] c0 usb usb1: Product: S5P EHCI Host Controller
  2586. <6>[ 1.395301] c0 usb usb1: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ehci_hcd
  2587. <6>[ 1.395339] c0 usb usb1: SerialNumber: s5p-ehci
  2588. <6>[ 1.395988] c0 hub 1-0:1.0: USB hub found
  2589. <6>[ 1.396027] c0 hub 1-0:1.0: 3 ports detected
  2590. <6>[ 1.396475] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  2591. <6>[ 1.396693] c0 s5p-ohci s5p-ohci: usb phy usage(6)
  2592. <3>[ 1.396725] c0 s5p-ohci s5p-ohci: Already power on PHY
  2593. <7>[ 1.400439] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  2594. <6>[ 1.400479] c0 s5p-ohci s5p-ohci: s5p OHCI
  2595. <6>[ 1.400733] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  2596. <7>[ 1.400855] c0 migrating range 70284 70285, retry (0)
  2597. <6>[ 1.418033] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
  2598. <6>[ 1.474166] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  2599. <6>[ 1.474209] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2600. <6>[ 1.474253] c0 usb usb2: Product: s5p OHCI
  2601. <6>[ 1.474278] c0 usb usb2: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ohci_hcd
  2602. <6>[ 1.474315] c0 usb usb2: SerialNumber: s5p-ohci
  2603. <6>[ 1.474977] c0 hub 2-0:1.0: USB hub found
  2604. <6>[ 1.475047] c0 hub 2-0:1.0: 3 ports detected
  2605. <6>[ 1.475563] c0 usbcore: registered new interface driver usblp
  2606. <6>[ 1.475599] c0 Initializing USB Mass Storage driver...
  2607. <6>[ 1.475724] c0 usbcore: registered new interface driver usb-storage
  2608. <6>[ 1.475757] c0 USB Mass Storage support registered.
  2609. <6>[ 1.475926] c0 usbcore: registered new interface driver usbserial
  2610. <6>[ 1.475961] c0 usbserial: USB Serial Driver core
  2611. <6>[ 1.476026] c0 USB Serial support registered for pl2303
  2612. <6>[ 1.476124] c0 usbcore: registered new interface driver pl2303
  2613. <6>[ 1.476157] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
  2614. <7>[ 1.476453] c0 migrating range 70285 70286, retry (0)
  2615. <6>[ 1.493710] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
  2616. <6>[ 1.493750] c0 s3c-udc : version 15 March 2009
  2617. <7>[ 1.493780] c0 init
  2618. <6>[ 1.494067] c0 usb: android_probe pdata: c0b23850
  2619. <6>[ 1.494097] c0 usb: android_probe nluns=0
  2620. <7>[ 1.494421] c0 usb: android_bind disconnect
  2621. <7>[ 1.494448] c0 usb: usb_gadget_disconnect
  2622. <7>[ 1.496129] c0 usb: mass_storage_function_init pdata->nluns=0, cdfs = 1
  2623. <7>[ 1.496171] c0 usb: usb_string_id cdev(0xed206960)->next_string_id=1
  2624. <6>[ 1.496337] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
  2625. <6>[ 1.496378] c0 android_usb gadget: Number of LUNs=1
  2626. <6>[ 1.496409] c0 lun0: LUN: removable CD-ROM file: (no medium)
  2627. <7>[ 1.496946] c0 usb: usb_string_id cdev(0xed206960)->next_string_id=2
  2628. <7>[ 1.496984] c0 usb: usb_string_id cdev(0xed206960)->next_string_id=3
  2629. <7>[ 1.497025] c0 usb: usb_string_id cdev(0xed206960)->next_string_id=4
  2630. <7>[ 1.497061] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
  2631. <7>[ 1.497096] c0 usb: composite_bind bcdDevice=0x0
  2632. <7>[ 1.497122] c0 usb: composite_bind composite_manufacturer=
  2633. <6>[ 1.497159] c0 android_usb gadget: android_usb ready
  2634. <6>[ 1.497187] c0 usb: Skip udc_enable
  2635. <6>[ 1.497522] c0 mousedev: PS/2 mouse device common for all mice
  2636. <6>[ 1.498236] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
  2637. <6>[ 1.498442] c0 wake enabled for irq 372
  2638. <6>[ 1.605061] c0 melfas-ts 3-0048: 0 panel
  2639. <3>[ 1.605088] c0 mms_reset excute
  2640. <6>[ 1.820159] c0 melfas-ts 3-0048: ILJIN panel
  2641. <6>[ 1.820439] c0 melfas-ts 3-0048: boot : 0x1, core : 0x76, config : 0x20
  2642. <6>[ 1.820690] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input1
  2643. <6>[ 1.821004] c0 s5p_gpioint_set_type irq:388 is at GPB(4)
  2644. <6>[ 1.823959] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_wtsr: enable WTSR
  2645. <6>[ 1.826624] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_smpl: disable SMPL
  2646. <6>[ 1.829741] c0 s5m_rtc_enable_smpl: WTSR_SMPL(0x40)
  2647. <6>[ 1.832092] c0 s5m_rtc_read_alarm: 2000/0/1 0:0:0(-1)
  2648. <6>[ 1.834049] c0 using rtc device, s5m-rtc, for alarms
  2649. <6>[ 1.834108] c0 s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0
  2650. <6>[ 1.834561] c0 s5m-rtc s5m-rtc: RTC CHIP NAME: s5m-rtc
  2651. <4>[ 1.834629] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  2652. <6>[ 1.835045] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
  2653. <6>[ 1.835176] c0 i2c /dev entries driver
  2654. <6>[ 1.836919] c0 Linux media interface: v0.10
  2655. <6>[ 1.837103] c0 lirc_dev: IR Remote Control driver registered, major 248
  2656. <6>[ 1.837142] c0 IR NEC protocol handler initialized
  2657. <6>[ 1.837170] c0 IR RC5(x) protocol handler initialized
  2658. <6>[ 1.837199] c0 IR RC6 protocol handler initialized
  2659. <6>[ 1.837227] c0 IR JVC protocol handler initialized
  2660. <6>[ 1.837255] c0 IR Sony protocol handler initialized
  2661. <6>[ 1.837283] c0 IR RC5 (streamzap) protocol handler initialized
  2662. <6>[ 1.837315] c0 IR LIRC bridge handler initialized
  2663. <6>[ 1.837344] c0 Linux video capture interface: v2.00
  2664. <6>[ 1.837398] c0 v4l2_i2c_drv_init: ISX012 init
  2665. <6>[ 1.837664] c0 v4l2_i2c_drv_init: SR130PC20 called
  2666. <6>[ 1.837929] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
  2667. <6>[ 1.838009] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
  2668. <2>[ 1.838101] c0 Initialize JPEG driver
  2669. <6>[ 1.840610] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  2670. <6>[ 1.840772] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  2671. <4>[ 1.841002] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
  2672. <6>[ 1.841227] c0 s5p_int_src_ext_hpd()
  2673. <6>[ 1.841256] c0 s5p_hpd_read_gpio(0)
  2674. <6>[ 1.841433] c0 s5p_hpd_read_gpio(0)
  2675. <6>[ 1.841690] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
  2676. <4>[ 1.841759] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
  2677. <4>[ 1.841795] c0 i2c-core: driver [s5p_ddc] using legacy resume method
  2678. <6>[ 1.842050] c0 mfc_init_mem_mgr[581] cma 0x58100000 0x5b200000 0x3100000 0x3100000 1
  2679. <6>[ 1.842106] c0 mfc_init_mem_mgr[641]: base 0x58100000, size 0x3100000, addr 0xd8100000
  2680. <6>[ 1.842433] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
  2681. <6>[ 1.842962] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
  2682. <6>[ 1.843429] c0 sii9234_cfg_gpio()
  2683. <6>[ 1.843482] c0 Registered interrupt support for gpio group 10.
  2684. <6>[ 1.843521] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  2685. <6>[ 1.843636] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
  2686. <6>[ 1.843943] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  2687. <6>[ 1.844063] c0 sii9234 : create mhl sysfile
  2688. <6>[ 1.844597] c0 input: sii9234_rcp as /devices/virtual/input/input2
  2689. <3>[ 1.895807] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  2690. <3>[ 1.902173] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  2691. <6>[ 1.910039] c0 wake enabled for irq 371
  2692. <7>[ 1.995035] c0 [keys] flip_cover_work : 1
  2693. <4>[ 2.018939] c0 i2c-core: driver [sec-fuelgauge] using legacy suspend method
  2694. <4>[ 2.018979] c0 i2c-core: driver [sec-fuelgauge] using legacy resume method
  2695. <6>[ 2.019033] c0 func:max77693_charger_init
  2696. <6>[ 2.019150] c0 max77693_charger_probe: MAX77693 Charger driver probe
  2697. <3>[ 2.025588] c0 power_supply sec-charger: driver failed to report `power_now' property
  2698. <3>[ 2.035713] c0 power_supply sec-charger: driver failed to report `power_now' property
  2699. <6>[ 2.045197] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  2700. <6>[ 2.045623] c0 cpuidle: using governor ladder
  2701. <6>[ 2.045865] c0 cpuidle: using governor menu
  2702. <6>[ 2.045931] c0 mshci: Mobile Storage Host Controller Interface driver
  2703. <6>[ 2.045967] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
  2704. <6>[ 2.046163] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (13333333 Hz)
  2705. <3>[ 2.047444] c0 mmc0: Version ID 0x5342240a.
  2706. <6>[ 2.051437] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
  2707. <6>[ 2.052878] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
  2708. <6>[ 2.052990] c0 sdhci: Secure Digital Host Controller Interface driver
  2709. <6>[ 2.053025] c0 sdhci: Copyright(c) Pierre Ossman
  2710. <6>[ 2.053174] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
  2711. <6>[ 2.053369] c0 mmc1: vtf_2.8v regulator found
  2712. <7>[ 2.053488] c0 Registered led device: mmc1::
  2713. <6>[ 2.055326] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
  2714. <6>[ 2.055383] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  2715. <6>[ 2.055633] c0 wake enabled for irq 380
  2716. <6>[ 2.055658] c0 mmc1: card removed.
  2717. <6>[ 2.055789] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
  2718. <3>[ 2.055882] c0 mmc2: no vmmc regulator found
  2719. <7>[ 2.058784] c0 Registered led device: mmc2::
  2720. <6>[ 2.058982] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  2721. <6>[ 2.061639] c0 usbcore: registered new interface driver usbhid
  2722. <6>[ 2.061672] c0 usbhid: USB HID core driver
  2723. <6>[ 2.062118] c0 logger: created 2048K log 'log_main'
  2724. <6>[ 2.062260] c0 logger: created 256K log 'log_events'
  2725. <6>[ 2.062414] c0 logger: created 1024K log 'log_radio'
  2726. <6>[ 2.062558] c0 logger: created 256K log 'log_system'
  2727. <6>[ 2.062592] c0 sec_getlog_supply_loggerinfo: 0xc0c18638 0xc0e18638 0xc0f18638 0xc0f58638
  2728. <6>[ 2.063596] c0 successful, position = 5
  2729. <6>[ 2.063813] c0 input: accelerometer as /devices/virtual/input/input3
  2730. <6>[ 2.064071] c0 Registered sensors device: accelerometer_sensor
  2731. <3>[ 2.064221] c0 geomagnetic_probe, is called
  2732. <6>[ 2.067207] c0 input: geomagnetic as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input4
  2733. <6>[ 2.067624] c0 input: geomagnetic_raw as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input5
  2734. <6>[ 2.067851] c0 geomagnetic_probe: set from board file.
  2735. <6>[ 2.067885] c0 geomagnetic_probe: yas magnetic position is 7
  2736. <6>[ 2.068217] c0 geomagnetic_probe: yamaha magnetic sensor id = 2
  2737. <4>[ 2.068361] c0 i2c-core: driver [yas532] using legacy suspend method
  2738. <4>[ 2.068399] c0 i2c-core: driver [yas532] using legacy resume method
  2739. <6>[ 2.068939] c0 input: orientation as /devices/virtual/input/input6
  2740. <6>[ 2.069211] c0 cm3323_i2c_probe is called.
  2741. <6>[ 2.069641] c1 sec-fuelgauge 14-0036: fg_check_status_reg: addr(0x00), data(0x0400)
  2742. <6>[ 2.069684] c0 cm3323_setup_reg is success.
  2743. <6>[ 2.069884] c0 input: light_sensor as /devices/virtual/input/input7
  2744. <6>[ 2.070649] c1 sec-fuelgauge 14-0036: sec_fg_irq_thread: Fuel-alert alerted!
  2745. <6>[ 2.072953] c1 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Abnormal Current Consumption jump by -6 units
  2746. <6>[ 2.073010] c1 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Last Reported SOC (0).
  2747. <3>[ 2.073058] c1 sec_hal_fg_fuelalert_process: Fail to get psy (battery)
  2748. <6>[ 2.078278] c0 Registered sensors device: light_sensor
  2749. <6>[ 2.078324] c0 cm3323_i2c_probe is success.
  2750. <6>[ 2.078429] c0 ir_remocon_probe start!
  2751. <3>[ 2.080859] c0 mmc0: cmd 52 response timeout error
  2752. <3>[ 2.085022] c0 mmc0: cmd 52 response timeout error
  2753. <3>[ 2.093042] c0 mmc0: cmd 8 response timeout error
  2754. <3>[ 2.097113] c0 mmc0: cmd 5 response timeout error
  2755. <3>[ 2.101785] c0 mmc0: cmd 5 response timeout error
  2756. <3>[ 2.106456] c0 mmc0: cmd 5 response timeout error
  2757. <3>[ 2.111144] c0 mmc0: cmd 5 response timeout error
  2758. <3>[ 2.115864] c0 mmc0: cmd 55 response timeout error
  2759. <3>[ 2.120632] c0 mmc0: cmd 55 response timeout error
  2760. <3>[ 2.125408] c0 mmc0: cmd 55 response timeout error
  2761. <3>[ 2.130193] c0 mmc0: cmd 55 response timeout error
  2762. <6>[ 2.151844] c0 mmc0: MAG2GC: 1501004d41473247430035c8b06b60bd
  2763. <6>[ 2.235752] c0 8. irda_fw_update: chip : 0202, bin : 0202, latest FW_ver
  2764. <6>[ 2.259200] c0 mmc0 : 20 : 00 : 01400312 : 1400312.
  2765. <6>[ 2.259233] c0 mmc0 : enable PON feature : 20 : 00 : 01400312
  2766. <4>[ 2.266431] c0 mmc0: Voltage range not supported for power class.
  2767. <3>[ 2.266467] c0 mmc0: power class selection to bus width 8 failed
  2768. <4>[ 2.288425] c0 mmc0: Voltage range not supported for power class.
  2769. <3>[ 2.288461] c0 mmc0: power class selection to bus width 8 ddr 2 failed
  2770. <6>[ 2.293917] c0 mmc0: new high speed DDR MMC card at address 0001
  2771. <6>[ 2.294329] c0 mmcblk0: mmc0:0001 MAG2GC 14.6 GiB
  2772. <6>[ 2.298377] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
  2773. <6>[ 2.334536] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
  2774. <6>[ 2.340204] c0 mckernelapi : Mobicore API module initialized!
  2775. <6>[ 2.340262] c0 mcdrvkmod mcd: MobiCore Driver, Build: Wed Feb 27 21:20:52 2019
  2776. <6>[ 2.340304] c0 mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
  2777. <6>[ 2.340339] c0 mcdrvkmod mcd: MobiCore *** SAMSUNG_Exynos4x12_Release_tbase-200_V005 ###
  2778. <6>[ 2.341172] c0 usbcore: registered new interface driver snd-usb-audio
  2779. <6>[ 2.342195] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
  2780. <6>[ 2.342350] c0 audss_init: RCLK SRC[busclk]
  2781. <7>[ 2.342978] c0 i2s_txctrl: Turn Off - spr is no active
  2782. <4>[ 2.482329] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
  2783. <4>[ 2.482371] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
  2784. <6>[ 2.516721] c0 Sound: enabled mclk
  2785. <7>[ 2.516748] c0 pmu_debug: 0x00000900
  2786. <6>[ 2.526810] c0 Sound: state: 1, use_cnt: 1
  2787. <3>[ 2.529233] c0 wm8994-codec wm8994-codec: dapm: unknown pin FM In
  2788. <3>[ 2.533904] c0 wm8994-codec wm8994-codec: dapm: unknown pin Third Mic
  2789. <6>[ 2.547655] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
  2790. <6>[ 2.552511] c0 asoc: wm8994-aif2 <-> tab3.cp mapping ok
  2791. <6>[ 2.553748] c0 asoc: wm8994-aif3 <-> tab3.bt mapping ok
  2792. <7>[ 2.553853] c0 i2s_txctrl: Turn Off - spr is no active
  2793. <7>[ 2.555275] c0 migrating range 702a0 702c0, retry (0)
  2794. <7>[ 2.573333] c0 migrating range 702c0 702e0, retry (0)
  2795. <6>[ 2.591027] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
  2796. <6>[ 2.592665] c0 Samsung SRP driver, (c)2011 Samsung Electronics
  2797. <6>[ 2.593644] c0 ALSA device list:
  2798. <6>[ 2.593669] c0 #0: TAB3_WM1811
  2799. <6>[ 2.593826] c0 GACT probability NOT on
  2800. <6>[ 2.593858] c0 Mirror/redirect action on
  2801. <6>[ 2.593884] c0 u32 classifier
  2802. <6>[ 2.593903] c0 Actions configured
  2803. <6>[ 2.593929] c0 Netfilter messages via NETLINK v0.30.
  2804. <6>[ 2.594027] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  2805. <6>[ 2.595238] c0 ctnetlink v0.93: registering with nfnetlink.
  2806. <6>[ 2.595321] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  2807. <6>[ 2.595360] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  2808. <6>[ 2.595756] c0 xt_time: kernel timezone is -0000
  2809. <6>[ 2.597864] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
  2810. <6>[ 2.598155] c0 arp_tables: (C) 2002 David S. Miller
  2811. <6>[ 2.598247] c0 TCP cubic registered
  2812. <6>[ 2.598271] c0 Initializing XFRM netlink socket
  2813. <6>[ 2.599215] c0 NET: Registered protocol family 10
  2814. <6>[ 2.602596] c0 Mobile IPv6
  2815. <6>[ 2.602652] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
  2816. <6>[ 2.603112] c0 IPv6 over IPv4 tunneling driver
  2817. <6>[ 2.608469] c0 NET: Registered protocol family 17
  2818. <6>[ 2.608527] c0 NET: Registered protocol family 15
  2819. <5>[ 2.608783] c0 Bridge firewalling registered
  2820. <6>[ 2.609054] c0 Bluetooth: RFCOMM TTY layer initialized
  2821. <6>[ 2.609125] c0 Bluetooth: RFCOMM socket layer initialized
  2822. <6>[ 2.609158] c0 Bluetooth: RFCOMM ver 1.11
  2823. <6>[ 2.609186] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2824. <6>[ 2.609217] c0 Bluetooth: BNEP filters: protocol multicast
  2825. <6>[ 2.609250] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2826. <6>[ 2.609424] c0 NET: Registered protocol family 35
  2827. <5>[ 2.609742] c0 Registering the dns_resolver key type
  2828. <6>[ 2.609801] c0 EXYNOS4X12: Adaptive Support Voltage init
  2829. <6>[ 2.609834] c0 EXYNOS4X12(SG): ORIG : 0 MOD : 0 RESULT : 0
  2830. <6>[ 2.609880] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  2831. <5>[ 2.609951] c0 Registering SWP/SWPB emulation handler
  2832. <5>[ 2.609985] c0 Registering SDIV/UDIV emulation handler
  2833. <6>[ 2.610062] c0 DVFS : VDD_ARM Voltage table set with 0 Group
  2834. <6>[ 2.610793] c0 DVFS : VDD_INT Voltage table set with 0 Group
  2835. <6>[ 2.611104] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14
  2836. <6>[ 2.611151] c0 s5p_tmu_probe: cpufreq_level[14], busfreq_value[100100]
  2837. <6>[ 2.611187] c0 @@@ get_refresh_interval = 0x2e
  2838. <6>[ 2.611213] c0 @@@ get_refresh_interval = 0x5d
  2839. <6>[ 2.611246] c0 ** temperature set value **
  2840. <6>[ 2.611267] c0 1st throttling stop_temp = 78, start_temp = 80
  2841. <6>[ 2.611296] c0 2nd throttling stop_temp = 87, start_tmep = 103
  2842. <6>[ 2.611327] c0 tripping temp = 110, s/w emergency temp = 120
  2843. <6>[ 2.611359] c0 mem throttling stop_temp = 80, start_temp = 85
  2844. <6>[ 2.611394] c0 tc_voltage stop_temp = 13, start_temp = 10
  2845. <6>[ 2.614630] c0 zswap: loading zswap
  2846. <6>[ 2.615078] c0 zswap: using lzo compressor
  2847. <4>[ 2.620992] c0 regulator_init_complete: vdd_int range: incomplete constraints, leaving on
  2848. <4>[ 2.621573] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on
  2849. <4>[ 2.622661] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
  2850. <6>[ 2.623943] c0 s5m-rtc s5m-rtc: setting system clock to 2012-01-01 00:05:04 UTC (1325376304)
  2851. <7>[ 2.624089] c0 ctrl->mem.size = 0x1a00000
  2852. <7>[ 2.624115] c0 ctrl->mem.base = 0x6dd00000
  2853. <6>[ 2.624499] c0 FIMC0 registered successfully
  2854. <7>[ 2.624691] c0 ctrl->mem.size = 0x500000
  2855. <7>[ 2.624717] c0 ctrl->mem.base = 0x0
  2856. <6>[ 2.624979] c0 FIMC1 registered successfully
  2857. <7>[ 2.625209] c0 ctrl->mem.size = 0x0
  2858. <7>[ 2.625233] c0 ctrl->mem.base = 0x0
  2859. <6>[ 2.625502] c0 FIMC2 registered successfully
  2860. <7>[ 2.625651] c0 ctrl->mem.size = 0x0
  2861. <7>[ 2.625674] c0 ctrl->mem.base = 0xffffffea
  2862. <6>[ 2.625917] c0 FIMC3 registered successfully
  2863. <6>[ 2.626132] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
  2864. <6>[ 2.655656] c1 Freeing init memory: 276K
  2865. <0>[ 2.656673] c1 Kernel panic - not syncing: Attempted to kill init!
  2866. <4>[ 2.661436] c1 Backtrace:
  2867. <4>[ 2.664119] c1 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  2868. <4>[ 2.672802] c1 r7:ed842000 r6:c035e5e0 r5:c078f774 r4:c0bb3c48
  2869. <4>[ 2.678684] c1 [<c078e33c>] (dump_stack+0x0/0x24) from [<c078f61c>] (panic+0xac/0x204)
  2870. <4>[ 2.686607] c1 [<c078f570>] (panic+0x0/0x204) from [<c00a6078>] (complete_and_exit+0x0/0x2c)
  2871. <4>[ 2.695019] c1 r3:c078f570 r2:ed843dc0 r1:00000001 r0:c095630c
  2872. <4>[ 2.700896] c1 r7:ed842000
  2873. <4>[ 2.703681] c1 [<c00a5748>] (do_exit+0x0/0x930) from [<c00a6100>] (do_group_exit+0x44/0xe4)
  2874. <4>[ 2.712036] c1 r7:ed842000
  2875. <4>[ 2.714796] c1 [<c00a60bc>] (do_group_exit+0x0/0xe4) from [<c00b82dc>] (get_signal_to_deliver+0x374/0x594)
  2876. <4>[ 2.724438] c1 r7:ed842000 r6:ed22c608 r5:ed22c60c r4:ed842000
  2877. <4>[ 2.730332] c1 [<c00b7f68>] (get_signal_to_deliver+0x0/0x594) from [<c00572b0>] (do_signal+0x78/0x5b4)
  2878. <4>[ 2.739634] c1 [<c0057238>] (do_signal+0x0/0x5b4) from [<c0057b80>] (do_notify_resume+0x68/0x74)
  2879. <4>[ 2.748402] c1 [<c0057b18>] (do_notify_resume+0x0/0x74) from [<c0053c58>] (work_pending+0x24/0x28)
  2880. <4>[ 2.757336] c1 r4:0000040f r3:00000000
  2881. <2>[ 2.761178] c0 CPU0: stopping
  2882. <4>[ 2.764085] c0 Backtrace:
  2883. <4>[ 2.766792] c0 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  2884. <4>[ 2.775457] c0 r7:00000006 r6:c004b2d4 r5:c0b01480 r4:00000000
  2885. <4>[ 2.781373] c0 [<c078e33c>] (dump_stack+0x0/0x24) from [<c004d73c>] (do_IPI+0x354/0x374)
  2886. <4>[ 2.789439] c0 [<c004d3e8>] (do_IPI+0x0/0x374) from [<c0053580>] (__irq_svc+0x80/0x160)
  2887. <4>[ 2.797419] c0 Exception stack(0xc0a17ea0 to 0xc0a17ee8)
  2888. <4>[ 2.802718] c0 7ea0: b2414d1b 4effa330 026e52da 0009b94b c0bb128c c00d2aa8 c23d61b8 c0a16020
  2889. <4>[ 2.811137] c0 7ec0: c23d61c8 c0c178b0 00000000 c0a17f1c 4effa330 c0a17ee8 c00d29a8 c006c284
  2890. <4>[ 2.819552] c0 7ee0: 80000013 ffffffff
  2891. <4>[ 2.823300] c0 [<c006c234>] (exynos4_enter_idle+0x0/0x1c8) from [<c05269c8>] (cpuidle_idle_call+0xdc/0x36c)
  2892. <4>[ 2.833005] c0 r8:c23d61c8 r7:c0a16020 r6:c23d61b8 r5:00000000 r4:c0bb0c04
  2893. <4>[ 2.839957] c0 [<c05268ec>] (cpuidle_idle_call+0x0/0x36c) from [<c0054d18>] (cpu_idle+0x13c/0x174)
  2894. <4>[ 2.848903] c0 [<c0054bdc>] (cpu_idle+0x0/0x174) from [<c077c9bc>] (rest_init+0xf0/0xf4)
  2895. <4>[ 2.856971] c0 [<c077c8cc>] (rest_init+0x0/0xf4) from [<c0008d04>] (start_kernel+0x5b0/0x5bc)
  2896. <4>[ 2.865468] c0 r4:c0b014ac r3:c077c8cc
  2897. <4>[ 2.869293] c0 [<c0008754>] (start_kernel+0x0/0x5bc) from [<40008040>] (0x40008040)
  2898. <6>[ 2.876936] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
  2899. <0>[ 2.883550] c1 Rebooting in 1 seconds..
  2900. <0>[ 3.885564] c1 sec_reboot (104, emergency)
  2901.  
  2902. Samsung S-Boot 4.0 for SM-T310 (Feb 16 2017 - 16:22:56)
  2903.  
  2904. EXYNOS4212(EVT 1.0) / 2044MB / 0MB / Rev 6 / T310XXSBQB5 /(PKG_ID 0x500f028)
  2905.  
  2906. BOOTLOADER VERSION : T310XXSBQB5
  2907.  
  2908. PMIC rev = PASS2(4)
  2909. CHECK PWROFFSRC = 0x00
  2910. CHECK RTC PWROFFSRC = 0x00
  2911. [s5m8767] update LDO2 onoff[1]
  2912. [s5m8767] update LDO4 onoff[1]
  2913. [s5m8767] update LDO5 onoff[0]
  2914. [s5m8767] update LDO6 onoff[1]
  2915. [s5m8767] update LDO7 onoff[1]
  2916. [s5m8767] update LDO8 onoff[1]
  2917. [s5m8767] update LDO9 vol[1800]
  2918. [s5m8767] update LDO10 onoff[1]
  2919. [s5m8767] update LDO11 vol[1950], onoff[1]
  2920. [s5m8767] update LDO12 onoff[1]
  2921. [s5m8767] update LDO13 onoff[0]
  2922. [s5m8767] update LDO14 vol[1950], onoff[1]
  2923. [s5m8767] update LDO15 onoff[1]
  2924. [s5m8767] update LDO16 onoff[1]
  2925. [s5m8767] update LDO19 vol[1900]
  2926. [s5m8767] update LDO20 vol[3300]
  2927. [s5m8767] update LDO21 vol[3300]
  2928. [s5m8767] update LDO22 vol[2800]
  2929. [s5m8767] update LDO27 vol[1500]
  2930. cardtype: 0x00000007
  2931. SB_MMC_HS_52MHZ_1_8V_3V_IO
  2932. mmc->card_caps: 0x00000311
  2933. mmc->host_caps: 0x00000311
  2934. [mmc] capacity = 30777344
  2935. Current SBOOT version : VERSION_-+A1
  2936. - read_bl1
  2937. pit_check_signature (PIT) valid.
  2938. initialize_ddi_data: usable! (7:0xe)
  2939. [RPMB] emmc_rpmb_open:
  2940. Get DATA success.
  2941.  
  2942. [RPMB] emmc_rpmb_close:
  2943. initialize_rpmb_data: usable! (SM-T310:VERSION_-+A1)
  2944. PARAM ENV VERSION: v1.0..
  2945. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2946. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2947. set_charger_state: buck(1), chg(1), reg(0x05)
  2948. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2949. set_auto_current: ta_state(1), curr(1800)
  2950. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2951. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2952. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2953. set_charger_state: buck(1), chg(1), reg(0x05)
  2954. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2955. set_auto_current: ta_state(1), curr(1800)
  2956. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2957. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2958. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2959. set_charger_state: buck(1), chg(0), reg(0x04)
  2960. init_fuelgauge: Start!!
  2961. check_battery_type: ADC of the BATT_ID(728)
  2962. check_battery_type: BATTERY TYPE(0)
  2963. init_fuelgauge: Battery type : SDI
  2964. init_fuelgauge: FG Capacity(0x21f6), LearnCFG(0x77), CGain(0x3fa1)
  2965. get_CGAIN: CGain = 0x3fa1
  2966. init_fuelgauge: Already initialized (0x21f6, SDI type)
  2967. fuel_gauge_read_vfsoc: VFSOC(0), data(0x0000)
  2968. fuel_gauge_read_soc: SOC(0), data(0x00bb)
  2969. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2970. fuel_gauge_compensate_soc: Start!!
  2971. fuel_gauge_read_soc: SOC(0), data(0x00bb)
  2972. fuel_gauge_read_vcell: VCELL(3394), data(0xa9b8)
  2973. calculate_table_soc: Get table SOC in case of charging!!
  2974. calculate_table_soc: i(9), vcell(3394), table_soc(0)
  2975. differ(0), table_soc(0), RepSOC(0)
  2976. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2977. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2978. set_charger_state: buck(1), chg(1), reg(0x05)
  2979. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  2980. set_auto_current: ta_state(1), curr(1800)
  2981. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  2982. init_microusb_ic: before MUIC: CDETCTRL:0x2d
  2983. init_microusb_ic: after MUIC: CDETCTRL:0x2d
  2984. init_microusb_ic: MUIC: CONTROL1:0x00
  2985. init_microusb_ic: MUIC: CONTROL1:0x00
  2986. init_microusb_ic: MUIC: CONTROL2:0x3b
  2987. init_microusb_ic: MUIC: CONTROL2:0x3b
  2988. ====================
  2989. s5m8767 pmic register
  2990. ====================
  2991. ID = 0x05
  2992. ONSRC = 0x04
  2993. STATUS1 = 0x00
  2994. STATUS2 = 0x16
  2995. STATUS3 = 0x07
  2996. IRQ1 = 0x00
  2997. IRQ2 = 0x20
  2998. IRQ3 = 0x00
  2999. PWROFFSRC = 0x00
  3000. PMIC_RTC_WTSR_SMPL_REG = 0x00
  3001. S5M8767_REG_BUCHG = 0x6f
  3002. s5p_check_keypad: 0x0
  3003. s5p_check_reboot_mode: INFORM3 = 0 ... skip
  3004. s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
  3005. s5p_check_upload: debug level is 4f4c!
  3006. s5p_check_upload: level low or unknown: skip 0
  3007. s5p_check_download: 0
  3008. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3009. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3010. check_pm_status: normal reset, do not enter LPM mode.
  3011. AST_POWERON..
  3012. scr_draw_image: draw 'logo.jpg'...
  3013. read 'logo.jpg'(55175) completed.
  3014. cmu_div:10, div:1, src_clk:800000000, pixel_clk:72161280
  3015. s5p_dsim_display_config: VIDEO MODE
  3016. 5E, 8C, 10,
  3017. BL_ID : 3
  3018. <start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
  3019. <start_checksum:483>offset:50, size:6296
  3020. <start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:25
  3021. Not Need Movinand Checksum
  3022. Movinand Checksum Confirmation Pass
  3023. [mobi_drv] add: 0x43e51c40, size: 3933
  3024. MobiCore INIT response = 0
  3025. MobiCore RTM has initialized!
  3026. MobiCore IDLE flag = 0
  3027. MobiCore driver address 43e51c40, size = 3933
  3028. MobiCore RTM Notified back!
  3029. MobiCore Driver loaded and RTM IDLE!
  3030. MobiCore RTM has been uninitialized!
  3031. load_kernel: loading boot image from 147456..
  3032. Verify_Binary_Signature: failed.
  3033. pit_check_signature (BOOT) invalid.
  3034. Set invalid sign flag
  3035. No need to update kernel type.
  3036.  
  3037. SMC Num = 0x83000001
  3038.  
  3039. mobismc success!!! [ret = 0]
  3040. [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A1, rpmb_version:VERSION_-+A1
  3041. rpmb_version:49, cur_version:49
  3042. DDI value :0x0000000e
  3043. ATAG_CORE: 5 54410001 0 0 0
  3044. ATAG_MEM: 4 54410002 20000000 40000000
  3045. ATAG_MEM: 4 54410002 1FC00000 60000000
  3046. ATAG_MEM: 4 54410002 20000000 80000000
  3047. ATAG_MEM: 4 54410002 20000000 A0000000
  3048. ATAG_SERIAL: 4 54410006 430035c8 b06b60bd
  3049. ATAG_INITRD2: 4 54420005 42000000 3d5f2e
  3050. ATAG_REVISION: 3 54410007 6
  3051. ATAG_CMDLINE: a3 54410009 'console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=f2c237718f530fb073cadbe393f4efc6 connie=SM-T310_OPEN_EUR_6e6ba1dfe4f4f816ed223cb02c204e70 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000'
  3052. ATAG_NONE: 0 0
  3053.  
  3054. Starting kernel at 0x40008000...
  3055.  
  3056. SWITCH_SEL(3)
  3057. <6>[ 0.000000] c0 Initializing cgroup subsys cpuset
  3058. <6>[ 0.000000] c0 Initializing cgroup subsys cpu
  3059. <5>[ 0.000000] c0 Linux version 3.0.31-kerNoleCM14.1+ (mika@arch-desktop) (gcc version 4.8 (GCC) ) #11 SMP PREEMPT Fri Mar 1 22:50:19 CET 2019
  3060. <4>[ 0.000000] c0 CPU: ARMv7 Processor [412fc098] revision 8 (ARMv7), cr=10c5387d
  3061. <4>[ 0.000000] c0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  3062. <4>[ 0.000000] c0 Machine: SMDK4x12
  3063. <3>[ 0.000000] c0 exynos_page_hole_area_reserve: Reserved 0x80000000 ~ 0xc0000000 for marking page holes
  3064. <6>[ 0.000000] c0 cma: CMA: reserved 8 MiB at 65800000
  3065. <6>[ 0.000000] c0 cma: CMA: reserved 40 MiB at 58800000
  3066. <6>[ 0.000000] c0 cma: CMA: reserved 16 MiB at 70000000
  3067. <6>[ 0.000000] c0 Memory policy: ECC disabled, Data cache writealloc
  3068. <4>[ 0.000000] c0 CPU EXYNOS4212 (id 0x43220210)
  3069. <7>[ 0.000000] c0 exynos4_init_clocks: initializing clocks
  3070. <6>[ 0.000000] c0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
  3071. <3>[ 0.000000] c0 s3c_register_clksrc: clock audiocdclk has no registers set
  3072. <3>[ 0.000000] c0 audiocdclk: no parent clock specified
  3073. <3>[ 0.000000] c0 s3c_register_clksrc: clock armclk has no registers set
  3074. <7>[ 0.000000] c0 exynos4_setup_clocks: registering clocks
  3075. <7>[ 0.000000] c0 exynos4_setup_clocks: xtal is 24000000
  3076. <6>[ 0.000000] c0 EXYNOS4: PLL settings, A=800000000, M=800000000, E=96000000 V=108000000
  3077. <6>[ 0.000000] c0 EXYNOS4: ARMCLK=800000000, DMC=400000000, ACLK200=24000000
  3078. <6>[ 0.000000] c0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
  3079. <6>[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
  3080. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  3081. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  3082. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  3083. <6>[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000
  3084. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  3085. <6>[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000
  3086. <6>[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000
  3087. <6>[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000
  3088. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  3089. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  3090. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  3091. <6>[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000
  3092. <6>[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 72727272
  3093. <6>[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000
  3094. <6>[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 72727272
  3095. <6>[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000
  3096. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  3097. <6>[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000
  3098. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 1500000
  3099. <6>[ 0.000000] c0 sclk_mdnie_pwm_pre: source is xusbxti (1), rate is 24000000
  3100. <6>[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
  3101. <6>[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
  3102. <6>[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000
  3103. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6f700000/0x00800000 for 'fimd'
  3104. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dd00000/0x01a00000 for 'fimc0'
  3105. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x6dc00000/0x00100000 for 'srp'
  3106. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x60800000/0x00400000 for 'mfc-normal'
  3107. <6>[ 0.000000] c0 S5P/CMA: Reserving 0x8700000 for secure region aligned by 0x8000000.
  3108. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58000000/0x00100000 for 'sectbl'
  3109. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x58100000/0x03100000 for 'mfc-secure'
  3110. <6>[ 0.000000] c0 S5P/CMA: Reserved 0x5b200000/0x05500000 for 'ion'
  3111. <0>[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564
  3112. <0>[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe
  3113. <7>[ 0.000000] c0 On node 0 totalpages: 523264
  3114. <7>[ 0.000000] c0 free_area_init_node: node 0, pgdat c0b9b1a0, node_mem_map c0fdf000
  3115. <7>[ 0.000000] c0 Normal zone: 1568 pages used for memmap
  3116. <7>[ 0.000000] c0 Normal zone: 0 pages reserved
  3117. <7>[ 0.000000] c0 Normal zone: 199136 pages, LIFO batch:31
  3118. <7>[ 0.000000] c0 HighMem zone: 2528 pages used for memmap
  3119. <7>[ 0.000000] c0 HighMem zone: 320032 pages, LIFO batch:31
  3120. <6>[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area
  3121. <6>[ 0.000000] c0 PERCPU: Embedded 8 pages/cpu @c23d6000 s8768 r8192 d15808 u32768
  3122. <7>[ 0.000000] c0 pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
  3123. <7>[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1
  3124. <6>[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 519168
  3125. <5>[ 0.000000] c0 Kernel command line: console=ttySAC3,115200 consoleblank=0 androidboot.hardware=smdk4x12 androidboot.selinux=permissive console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=f2c237718f530fb073cadbe393f4efc6 connie=SM-T310_OPEN_EUR_6e6ba1dfe4f4f816ed223cb02c204e70 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000
  3126. <6>[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:2e358 sec_log_buf:fd200000 sec_log_size:2097152
  3127. <6>[ 0.000000] c0 sec_log_save_old: saved old log at 189272@c23e6180
  3128. <6>[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000
  3129. <6>[ 0.000000] c0 tima :sec_tima_log_setup, base:46202000, size:200000
  3130. <6>[ 0.000000] c0 sec_avc_log_setup: *sec_avc_log_ptr:1e59c sec_avc_log_buf:c6404000 sec_log_size:0x40000
  3131. <6>[ 0.000000] c0 get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:4
  3132. <6>[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  3133. <6>[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  3134. <6>[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  3135. <6>[ 0.000000] c0 allocated 8388608 bytes of page_cgroup
  3136. <6>[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups
  3137. <6>[ 0.000000] c0 Memory: 1020MB 1024MB = 2044MB total
  3138. <5>[ 0.000000] c0 Memory: 1315628k/1315628k available, 777428k reserved, 765952K highmem
  3139. <5>[ 0.000000] c0 Virtual kernel memory layout:
  3140. <5>[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  3141. <5>[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  3142. <5>[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
  3143. <5>[ 0.000000] c0 vmalloc : 0xf1800000 - 0xfc000000 ( 168 MB)
  3144. <5>[ 0.000000] c0 lowmem : 0xc0000000 - 0xf1000000 ( 784 MB)
  3145. <5>[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  3146. <5>[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  3147. <5>[ 0.000000] c0 .init : 0xc0008000 - 0xc004d000 ( 276 kB)
  3148. <5>[ 0.000000] c0 .text : 0xc004d000 - 0xc0a15000 (10016 kB)
  3149. <5>[ 0.000000] c0 .data : 0xc0a16000 - 0xc0bb0b10 (1643 kB)
  3150. <5>[ 0.000000] c0 .bss : 0xc0bb0b34 - 0xc0fde868 (4280 kB)
  3151. <6>[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  3152. <6>[ 0.000000] c0 Preemptible hierarchical RCU implementation.
  3153. <6>[ 0.000000] c0 NR_IRQS:501
  3154. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  3155. <6>[ 0.000000] c0 Console: colour dummy device 80x30
  3156. <6>[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)
  3157. <6>[ 0.000000] c0 pid_max: default: 32768 minimum: 301
  3158. <6>[ 0.000000] c0 Security Framework initialized
  3159. <6>[ 0.000000] c0 AppArmor: AppArmor initialized
  3160. <6>[ 0.000000] c0 Mount-cache hash table entries: 512
  3161. <6>[ 0.000000] c0 Initializing cgroup subsys debug
  3162. <6>[ 0.000000] c0 Initializing cgroup subsys cpuacct
  3163. <6>[ 0.000000] c0 Initializing cgroup subsys memory
  3164. <6>[ 0.000000] c0 Initializing cgroup subsys devices
  3165. <6>[ 0.000000] c0 Initializing cgroup subsys freezer
  3166. <6>[ 0.000000] c0 Initializing cgroup subsys blkio
  3167. <6>[ 0.000000] c0 Initializing cgroup subsys perf_event
  3168. <6>[ 0.000000] c0 Initializing cgroup subsys bfqio
  3169. <6>[ 0.000000] c0 CPU: Testing write buffer coherency: ok
  3170. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  3171. <6>[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify
  3172. <6>[ 0.000000] c0 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  3173. <6>[ 0.000000] c0 L310 cache controller enabled
  3174. <6>[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c7, AUX_CTRL 0x7e470001, Cache size: 1048576 B
  3175. <4>[ 0.030000] c1 CPU1: Booted secondary processor
  3176. <6>[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify
  3177. <6>[ 0.040000] c0 Brought up 2 CPUs
  3178. <6>[ 0.040000] c0 SMP: Total of 2 processors activated (3185.04 BogoMIPS).
  3179. <6>[ 0.040000] c0 devtmpfs: initialized
  3180. <3>[ 0.045000] c0 gpio: GPK0 has missing PM functions
  3181. <6>[ 0.045000] c0 print_constraints: dummy:
  3182. <6>[ 0.050000] c0 NET: Registered protocol family 16
  3183. <7>[ 0.050000] c0 migrating range 70000 70280, retry (0)
  3184. <6>[ 0.075000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations
  3185. <6>[ 0.075000] c0 [GPIO_DVS] secgpio_dvs_init has been initialized(0)!!!
  3186. <6>[ 0.075000] c0 [GPIO_DVS] secgpio_dvs_probe has been created!!!
  3187. <7>[ 0.075000] c0 midas_config_gpio_table
  3188. <6>[ 0.075000] c0 midas_power_init
  3189. <6>[ 0.075000] c0 [GPIO_DVS][check_gpio_status] state : init
  3190. <6>[ 0.080000] c0 [GPIO_DVS][check_gpio_status] --
  3191. <6>[ 0.080000] c0 [gpio_dvs_check_initgpio] !!!
  3192. <6>[ 0.080000] c0 [TSP] midas_tsp_init() is called
  3193. <6>[ 0.080000] c0 Registered chained gpio int handler for interrupt 111.
  3194. <6>[ 0.080000] c0 Registered interrupt support for gpio group 2.
  3195. <6>[ 0.080000] c0 tab3_tsp_init touch irq : 388 (6)
  3196. <6>[ 0.080000] c0 TSP ID : 0
  3197. <6>[ 0.080000] c0 touch panel : 0
  3198. <6>[ 0.080000] c0 Sound: start midas_sound_init
  3199. <6>[ 0.080000] c0 midas_machine_init() register sii9234 driver
  3200. <7>[ 0.080000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=0
  3201. <7>[ 0.080000] c0 usb: smdk4212_usbgadget_init tune_mask=0x3800, tune=0x2800
  3202. <6>[ 0.080000] c0 exynos_slim8_charger_init: tab3 charger init
  3203. <4>[ 0.080000] c0 brcm_wlan_init: start
  3204. <4>[ 0.080000] c0 brcm_init_wlan_mem: WIFI MEM Allocated
  3205. <4>[ 0.080000] c0 -----------------------------------------------------
  3206. <4>[ 0.080000] c0 -----------------------------------------------------
  3207. <4>[ 0.080000] c0 -----------------------------------------------------
  3208. <4>[ 0.080000] c0 regist ret:0
  3209. <3>[ 0.080000] c0 ram_console: invalid start 0 or end 0
  3210. <6>[ 0.085000] c0 exynos4_exynos4212_mfd_init
  3211. <3>[ 0.085000] c0 irda_device_init called!
  3212. <6>[ 0.085000] c0 hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  3213. <6>[ 0.085000] c0 hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  3214. <6>[ 0.085000] c0 hw-breakpoint: maximum watchpoint size is 4 bytes.
  3215. <6>[ 0.085000] c0 exynos4_pmu_init: PMU supports 4212(104)
  3216. <6>[ 0.085000] c0 S3C Power Management, Copyright 2004 Simtec Electronics
  3217. <6>[ 0.085000] c0 EXYNOS4: Initializing architecture
  3218. <4>[ 0.085000] c0 s3c-adc samsung-adc-v4: s3c_adc_irq: no adc pending
  3219. <6>[ 0.085000] c0 s3c-adc samsung-adc-v4: attached adc driver
  3220. <6>[ 0.085000] c0 samsung-pd samsung-pd.0: power domain registered
  3221. <6>[ 0.085000] c0 samsung-pd samsung-pd.1: power domain registered
  3222. <6>[ 0.085000] c0 samsung-pd samsung-pd.2: power domain registered
  3223. <6>[ 0.085000] c0 lcd0 disable skip only one time
  3224. <6>[ 0.085000] c0 samsung-pd samsung-pd.5: power domain registered
  3225. <6>[ 0.085000] c0 samsung-pd samsung-pd.4: power domain registered
  3226. <6>[ 0.085000] c0 samsung-pd samsung-pd.6: power domain registered
  3227. <6>[ 0.085000] c0 samsung-pd samsung-pd.7: power domain registered
  3228. <6>[ 0.085000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
  3229. <6>[ 0.085000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
  3230. <6>[ 0.085000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12
  3231. <6>[ 0.085000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16
  3232. <6>[ 0.085000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.
  3233. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
  3234. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
  3235. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.
  3236. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
  3237. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
  3238. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
  3239. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
  3240. <6>[ 0.090000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.
  3241. <6>[ 0.095000] c0 bio: create slab <bio-0> at 0
  3242. <6>[ 0.095000] c0 print_constraints: VBATT: 5000 mV
  3243. <5>[ 0.100000] c0 SCSI subsystem initialized
  3244. <6>[ 0.100000] c0 usbcore: registered new interface driver usbfs
  3245. <6>[ 0.100000] c0 usbcore: registered new interface driver hub
  3246. <6>[ 0.100000] c0 usbcore: registered new device driver usb
  3247. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.14: using pins 137 (SDA) and 138 (SCL)
  3248. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.9: using pins 115 (SDA) and 114 (SCL)
  3249. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)
  3250. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.15: using pins 149 (SDA) and 150 (SCL)
  3251. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.22: using pins 135 (SDA) and 136 (SCL)
  3252. <6>[ 0.100000] c0 i2c-gpio i2c-gpio.24: using pins 284 (SDA) and 283 (SCL)
  3253. <6>[ 0.100000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0
  3254. <6>[ 0.175000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe
  3255. <6>[ 0.175000] c0 print_constraints: safeout1 range: at 4900 mV
  3256. <6>[ 0.175000] c0 print_constraints: safeout2 range: at 4900 mV
  3257. <6>[ 0.175000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 1800 mA
  3258. <6>[ 0.180000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)
  3259. <6>[ 0.180000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  3260. <6>[ 0.180000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  3261. <6>[ 0.180000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  3262. <6>[ 0.180000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
  3263. <6>[ 0.180000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
  3264. <3>[ 0.180000] c0 s3c-i2c s3c2440-i2c.6: no platform data
  3265. <4>[ 0.180000] c0 s3c-i2c: probe of s3c2440-i2c.6 failed with error -22
  3266. <7>[ 0.180000] c0 s5m8767_pmic_probe: PMIC DEVICE ID=> 0x5
  3267. <6>[ 0.190000] c0 print_constraints: vdd_mif range: 850 <--> 1100 mV at 1050 mV
  3268. <6>[ 0.190000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV
  3269. <6>[ 0.195000] c0 print_constraints: vdd_int range: 850 <--> 1300 mV at 1000 mV
  3270. <6>[ 0.195000] c0 print_constraints: vdd_g3d range: 850 <--> 1150 mV at 1000 mV
  3271. <6>[ 0.195000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
  3272. <6>[ 0.195000] c0 print_constraints: VCC_1.8V_AP: 1800 mV
  3273. <6>[ 0.200000] c0 print_constraints: VCC_3.3V_MHL: 3300 mV
  3274. <6>[ 0.200000] c0 print_constraints: VMIPI_1.0V: 1000 mV
  3275. <6>[ 0.200000] c0 print_constraints: VSIL_1.2V: 1200 mV
  3276. <6>[ 0.205000] c0 print_constraints: VMIPI_1.8V: 1800 mV
  3277. <6>[ 0.205000] c0 print_constraints: VCC_1.8V_MHL: 1800 mV
  3278. <6>[ 0.205000] c0 print_constraints: VLED_IC_1.9V: 1900 mV
  3279. <6>[ 0.210000] c0 print_constraints: VTOUCH_3.3V: 3300 mV
  3280. <6>[ 0.210000] c0 print_constraints: TSP_VDD_3.3V: 3300 mV
  3281. <6>[ 0.210000] c0 print_constraints: 5M_AF_2.8V: 2800 mV
  3282. <6>[ 0.210000] c0 print_constraints: VTF_2.8V: 2800 mV
  3283. <6>[ 0.215000] c0 print_constraints: LEDA_2.8V: 2800 mV
  3284. <6>[ 0.215000] c0 print_constraints: TSP_VDD_1.8V: 1800 mV
  3285. <6>[ 0.215000] c0 print_constraints: CAM_IO_1.8V: 1800 mV
  3286. <6>[ 0.215000] c0 print_constraints: VTCAM_1.8V: 1800 mV
  3287. <6>[ 0.215000] c0 s5m87xx 7-0066: S5M87xx MFD probe done!!!
  3288. <6>[ 0.215000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
  3289. <6>[ 0.220000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.
  3290. <6>[ 0.220000] c0 Bluetooth: Core ver 2.16
  3291. <6>[ 0.220000] c0 NET: Registered protocol family 31
  3292. <6>[ 0.220000] c0 Bluetooth: HCI device and connection manager initialized
  3293. <6>[ 0.220000] c0 Bluetooth: HCI socket layer initialized
  3294. <6>[ 0.220000] c0 Bluetooth: L2CAP socket layer initialized
  3295. <6>[ 0.220000] c0 Bluetooth: SCO socket layer initialized
  3296. <6>[ 0.220000] c0 cfg80211: Calling CRDA to update world regulatory domain
  3297. <6>[ 0.220000] c0 NetLabel: Initializing
  3298. <6>[ 0.220000] c0 NetLabel: domain hash size = 128
  3299. <6>[ 0.220000] c0 NetLabel: protocols = UNLABELED CIPSOv4
  3300. <6>[ 0.220000] c0 NetLabel: unlabeled traffic allowed by default
  3301. <6>[ 0.220000] c0 Switching to clocksource mct-frc
  3302. <6>[ 0.223145] c0 Switched to NOHz mode on CPU #0
  3303. <6>[ 0.223578] c1 Switched to NOHz mode on CPU #1
  3304. <6>[ 0.234991] c0 AppArmor: AppArmor Filesystem Enabled
  3305. <6>[ 0.244141] c0 NET: Registered protocol family 2
  3306. <6>[ 0.244452] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  3307. <6>[ 0.245482] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  3308. <6>[ 0.247440] c0 TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
  3309. <6>[ 0.250824] c0 TCP: Hash tables configured (established 131072 bind 65536)
  3310. <6>[ 0.250867] c0 TCP reno registered
  3311. <6>[ 0.250907] c0 UDP hash table entries: 512 (order: 3, 32768 bytes)
  3312. <6>[ 0.251017] c0 UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
  3313. <6>[ 0.251622] c0 NET: Registered protocol family 1
  3314. <6>[ 0.251912] c0 Trying to unpack rootfs image as initramfs...
  3315. <6>[ 0.498666] c0 Freeing initrd memory: 3924K
  3316. <6>[ 0.498831] c0 PMU: registered new PMU device of type 0
  3317. <6>[ 0.499092] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3318. <6>[ 0.499361] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3319. <6>[ 0.499493] c0 Exynos4 : ARM Clock down on idle mode is enabled
  3320. <6>[ 0.500854] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully
  3321. <6>[ 0.500974] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully
  3322. <6>[ 0.501090] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully
  3323. <6>[ 0.501207] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully
  3324. <6>[ 0.501325] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully
  3325. <6>[ 0.501362] c0 accel_gpio_init
  3326. <6>[ 0.501478] c0 i2c 1-0019: i2c_add_devices - added k3dh successfully
  3327. <6>[ 0.501594] c0 i2c 9-0010: i2c_add_devices - added cm3323 successfully
  3328. <6>[ 0.501711] c0 i2c 10-002e: i2c_add_devices - added yas532 successfully
  3329. <6>[ 0.502491] c0 wake enabled for irq 374
  3330. <6>[ 0.502644] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  3331. <7>[ 0.503325] c0 migrating range 70280 70281, retry (0)
  3332. <6>[ 0.518854] c0 Loaded driver for PL330 DMAC-0 s3c-pl330
  3333. <6>[ 0.518890] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  3334. <7>[ 0.519137] c0 migrating range 70281 70282, retry (0)
  3335. <6>[ 0.534424] c0 Loaded driver for PL330 DMAC-1 s3c-pl330
  3336. <6>[ 0.534460] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  3337. <7>[ 0.534718] c0 migrating range 70282 70283, retry (0)
  3338. <6>[ 0.549938] c0 Loaded driver for PL330 DMAC-2 s3c-pl330
  3339. <6>[ 0.549973] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  3340. <6>[ 0.550358] c0 audit: initializing netlink socket (enabled)
  3341. <4>[ 0.558942] c0 highmem bounce pool size: 64 pages
  3342. <6>[ 0.559265] c0 ashmem: initialized
  3343. <6>[ 0.568918] c0 exFAT: Core Version 1.2.9
  3344. <6>[ 0.568945] c0 exFAT: FS Version 1.2.9
  3345. <6>[ 0.570451] c0 Registering sdcardfs 0.1
  3346. <6>[ 0.570832] c0 fuse init (API version 7.16)
  3347. <6>[ 0.571672] c0 msgmni has been set to 1209
  3348. <6>[ 0.572031] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3349. <6>[ 0.572273] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3350. <6>[ 0.572455] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3351. <6>[ 0.572671] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3352. <6>[ 0.572877] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3353. <6>[ 0.573032] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3354. <6>[ 0.573240] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3355. <6>[ 0.573452] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3356. <6>[ 0.573734] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3357. <6>[ 0.573967] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3358. <6>[ 0.574180] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3359. <6>[ 0.574936] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3360. <6>[ 0.575219] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3361. <6>[ 0.575380] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3362. <6>[ 0.575424] c0 FIPS: No test for stdrng (krng)
  3363. <6>[ 0.575510] c0 io scheduler noop registered (default)
  3364. <6>[ 0.575541] c0 io scheduler deadline registered
  3365. <6>[ 0.575568] c0 io scheduler row registered
  3366. <6>[ 0.575864] c0 io scheduler cfq registered
  3367. <6>[ 0.576122] c0 io scheduler bfq registered
  3368. <6>[ 0.576147] c0 BFQ I/O-scheduler: v7r8
  3369. <6>[ 0.576172] c0 io scheduler sio registered
  3370. <6>[ 0.576196] c0 io scheduler vr registered
  3371. <6>[ 0.576220] c0 start plist test
  3372. <6>[ 0.587512] c0 end plist test
  3373. <6>[ 0.589923] c0 s3cfb s3cfb.0: src_clk=800000000, vclk=72161280, div=11(10), rate=79999999
  3374. <6>[ 0.590117] c0 set mdnie_pwm sclk rate to 2181818
  3375. <6>[ 0.590147] c0 set mdnie_pwm sclk rate to 12000000
  3376. <6>[ 0.590182] c0 s3cfb s3cfb.0: fimd sclk rate 72727272, clkdiv 0xff1baa
  3377. <6>[ 0.590349] c0 s3cfb s3cfb.0: fifo underrun trace
  3378. <6>[ 0.590636] c0 s3cfb s3cfb.0: [fb0] win2: dma: 0x6f700000, cpu: 0xf18b9000, size: 0x007d0000
  3379. <6>[ 0.595949] c0 sec_getlog_supply_fbinfo: 0x6f700000 800 1280 32 2
  3380. <6>[ 0.603654] c0 Bootloader sent 'bootloaderfb' : 5EC00000
  3381. <6>[ 0.604519] c0 s3cfb s3cfb.0: parent clock: 72727272, vclk: 72165000, vclk div: 1
  3382. <6>[ 0.604752] c0 s3cfb s3cfb.0: registered successfully
  3383. <6>[ 0.605203] c0 mdnie mdnie: lcdtype: 1
  3384. <6>[ 0.605244] c0 mdnie mdnie: standard_ui
  3385. <6>[ 0.605268] c0 mdnie mdnie: registered successfully
  3386. <6>[ 0.605398] c0 s5p_dsim_mipi_power_control: enable=1
  3387. <6>[ 0.606501] c0 lcd_power_on: enable=1
  3388. <6>[ 0.616495] c0 s5p-dsim s5p-dsim.0: rxhd : 2005e11
  3389. <6>[ 0.633614] c0 s5p-dsim s5p-dsim.0: rxhd : 3e008c11
  3390. <6>[ 0.650721] c0 s5p-dsim s5p-dsim.0: rxhd : 32001011
  3391. <6>[ 0.650879] c0 lcd panel: ID: 5e, 8c, 10
  3392. <6>[ 0.650906] c0 lcd panel: s6d7aa0 lcd panel driver has been probed.
  3393. <6>[ 0.650952] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed
  3394. <6>[ 0.651336] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  3395. <6>[ 0.945283] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
  3396. <6>[ 1.025104] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
  3397. <6>[ 1.105109] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
  3398. <6>[ 1.185096] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
  3399. <6>[ 1.239706] c0 console [ttySAC3] enabled
  3400. <4>[ 1.295263] c0 Mali: :::exynos_result_of_asv : 0
  3401. <4>[ 1.295294] c0 Mali: mali_dvfs[0].vol = 950000
  3402. <4>[ 1.295323] c0 Mali: :::exynos_result_of_asv : 0
  3403. <4>[ 1.295353] c0 Mali: mali_dvfs[1].vol = 975000
  3404. <4>[ 1.295382] c0 Mali: mali_runtime_resume.vol = 975000
  3405. <4>[ 1.295412] c0 Mali: :::exynos_result_of_asv : 0
  3406. <4>[ 1.295440] c0 Mali: mali_dvfs[2].vol = 1025000
  3407. <4>[ 1.295468] c0 Mali: :::exynos_result_of_asv : 0
  3408. <4>[ 1.295495] c0 Mali: mali_dvfs[3].vol = 1100000
  3409. <4>[ 1.295523] c0 Mali: init_gpu_vol = 1100000
  3410. <4>[ 1.295931] c0 Mali: init_mali_clock mali_clock c0b0cab0
  3411. <7>[ 1.298853] c0 migrating range 70300 70700, retry (0)
  3412. <4>[ 1.327301] c0 Mali: Mali device driver loaded
  3413. <4>[ 1.327517] c0 UMP: UMP device driver 0000 loaded
  3414. <6>[ 1.327550] c0 func:max77693_muic_init
  3415. <6>[ 1.327688] c0 func:max77693_muic_probe
  3416. <6>[ 1.327719] c0 max77693-muic max77693-muic: adc:0 chgtype:0, adc1k:0
  3417. <6>[ 1.327755] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART
  3418. <6>[ 1.327795] c0 max77693_muic_probe: switch_sel: 3
  3419. <6>[ 1.327968] c0 MUIC ret=0
  3420. <6>[ 1.327992] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2
  3421. <6>[ 1.329477] c0 max77693_muic_set_adcdbset: CNTL3: before:0x20 value:0x20 after:0x20
  3422. <6>[ 1.331120] c0 max77693-muic:max77693_muic_init_regs CONTROL[1:0x0, 2:0x3b, 3:0x20]
  3423. <6>[ 1.331163] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=6
  3424. <6>[ 1.331728] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0
  3425. <6>[ 1.332289] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0
  3426. <6>[ 1.332851] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0
  3427. <6>[ 1.342526] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445
  3428. <6>[ 1.343090] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9
  3429. <6>[ 1.343652] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11
  3430. <6>[ 1.344213] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0
  3431. <6>[ 1.344775] c0 max77693_set_jig_state: 0
  3432. <6>[ 1.351715] c0 brd: module loaded
  3433. <6>[ 1.354898] c0 loop: module loaded
  3434. <6>[ 1.354940] c0 lkdtm: No crash points registered, enable through debugfs
  3435. <6>[ 1.355099] c0 sec_jack_probe : Registering jack driver
  3436. <6>[ 1.355740] c0 wake enabled for irq 356
  3437. <6>[ 1.356278] c0 print_constraints: WM1811 LDO1: at 3000 mV
  3438. <6>[ 1.356599] c0 print_constraints: WM1811 LDO2: at 1050 mV
  3439. <6>[ 1.387951] c0 wm8994 4-001a: Succeeded to read ID register
  3440. <6>[ 1.394973] c0 wm8994 4-001a: WM1811 revision D CUST_ID 01
  3441. <4>[ 1.405593] c0 wm8994 4-001a: No interrupt specified, no interrupts
  3442. <6>[ 1.406458] c0 PPP generic driver version 2.4.2
  3443. <6>[ 1.406681] c0 PPP Deflate Compression module registered
  3444. <6>[ 1.406712] c0 PPP BSD Compression module registered
  3445. <6>[ 1.408915] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3446. <6>[ 1.409051] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify
  3447. <6>[ 1.409402] c0 PPP MPPE Compression module registered
  3448. <6>[ 1.409437] c0 NET: Registered protocol family 24
  3449. <6>[ 1.409468] c0 tun: Universal TUN/TAP device driver, 1.6
  3450. <6>[ 1.409498] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  3451. <6>[ 1.409859] c0 host_notifier host_notifier.0: notifier_prove
  3452. <6>[ 1.410258] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3453. <6>[ 1.410476] c0 s5p-ehci s5p-ehci: usb phy usage(2)
  3454. <7>[ 1.410637] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  3455. <6>[ 1.410678] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller
  3456. <6>[ 1.410898] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  3457. <7>[ 1.411083] c0 migrating range 70283 70284, retry (0)
  3458. <6>[ 1.428621] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
  3459. <6>[ 1.435067] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  3460. <6>[ 1.435193] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  3461. <6>[ 1.435235] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3462. <6>[ 1.435277] c0 usb usb1: Product: S5P EHCI Host Controller
  3463. <6>[ 1.435309] c0 usb usb1: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ehci_hcd
  3464. <6>[ 1.435346] c0 usb usb1: SerialNumber: s5p-ehci
  3465. <6>[ 1.435991] c0 hub 1-0:1.0: USB hub found
  3466. <6>[ 1.436031] c0 hub 1-0:1.0: 3 ports detected
  3467. <6>[ 1.436487] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  3468. <6>[ 1.436698] c0 s5p-ohci s5p-ohci: usb phy usage(6)
  3469. <3>[ 1.436730] c0 s5p-ohci s5p-ohci: Already power on PHY
  3470. <7>[ 1.440447] c0 usb: set_exynos_usb_phy_tune it is not exynos4412.(t=1)
  3471. <6>[ 1.440487] c0 s5p-ohci s5p-ohci: s5p OHCI
  3472. <6>[ 1.440734] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
  3473. <7>[ 1.440855] c0 migrating range 70284 70285, retry (0)
  3474. <6>[ 1.458057] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
  3475. <6>[ 1.514161] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  3476. <6>[ 1.514204] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  3477. <6>[ 1.514247] c0 usb usb2: Product: s5p OHCI
  3478. <6>[ 1.514273] c0 usb usb2: Manufacturer: Linux 3.0.31-kerNoleCM14.1+ ohci_hcd
  3479. <6>[ 1.514311] c0 usb usb2: SerialNumber: s5p-ohci
  3480. <6>[ 1.514978] c0 hub 2-0:1.0: USB hub found
  3481. <6>[ 1.515048] c0 hub 2-0:1.0: 3 ports detected
  3482. <6>[ 1.515568] c0 usbcore: registered new interface driver usblp
  3483. <6>[ 1.515604] c0 Initializing USB Mass Storage driver...
  3484. <6>[ 1.515731] c0 usbcore: registered new interface driver usb-storage
  3485. <6>[ 1.515766] c0 USB Mass Storage support registered.
  3486. <6>[ 1.515936] c0 usbcore: registered new interface driver usbserial
  3487. <6>[ 1.515970] c0 usbserial: USB Serial Driver core
  3488. <6>[ 1.516038] c0 USB Serial support registered for pl2303
  3489. <6>[ 1.516136] c0 usbcore: registered new interface driver pl2303
  3490. <6>[ 1.516169] c0 pl2303: Prolific PL2303 USB to serial adaptor driver
  3491. <7>[ 1.516469] c0 migrating range 70285 70286, retry (0)
  3492. <6>[ 1.533797] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
  3493. <6>[ 1.533837] c0 s3c-udc : version 15 March 2009
  3494. <7>[ 1.533869] c0 init
  3495. <6>[ 1.534151] c0 usb: android_probe pdata: c0b23850
  3496. <6>[ 1.534181] c0 usb: android_probe nluns=0
  3497. <7>[ 1.534504] c0 usb: android_bind disconnect
  3498. <7>[ 1.534530] c0 usb: usb_gadget_disconnect
  3499. <7>[ 1.536239] c0 usb: mass_storage_function_init pdata->nluns=0, cdfs = 1
  3500. <7>[ 1.536282] c0 usb: usb_string_id cdev(0xed208960)->next_string_id=1
  3501. <6>[ 1.536451] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11
  3502. <6>[ 1.536496] c0 android_usb gadget: Number of LUNs=1
  3503. <6>[ 1.536528] c0 lun0: LUN: removable CD-ROM file: (no medium)
  3504. <7>[ 1.537062] c0 usb: usb_string_id cdev(0xed208960)->next_string_id=2
  3505. <7>[ 1.537100] c0 usb: usb_string_id cdev(0xed208960)->next_string_id=3
  3506. <7>[ 1.537141] c0 usb: usb_string_id cdev(0xed208960)->next_string_id=4
  3507. <7>[ 1.537178] c0 usb: composite_bind idVendor=0x0, idProduct=0x0
  3508. <7>[ 1.537210] c0 usb: composite_bind bcdDevice=0x0
  3509. <7>[ 1.537237] c0 usb: composite_bind composite_manufacturer=
  3510. <6>[ 1.537274] c0 android_usb gadget: android_usb ready
  3511. <6>[ 1.537304] c0 usb: Skip udc_enable
  3512. <6>[ 1.537639] c0 mousedev: PS/2 mouse device common for all mice
  3513. <6>[ 1.538337] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input0
  3514. <6>[ 1.538543] c0 wake enabled for irq 372
  3515. <6>[ 1.645062] c0 melfas-ts 3-0048: 0 panel
  3516. <3>[ 1.645089] c0 mms_reset excute
  3517. <6>[ 1.860158] c0 melfas-ts 3-0048: ILJIN panel
  3518. <6>[ 1.860434] c0 melfas-ts 3-0048: boot : 0x1, core : 0x76, config : 0x20
  3519. <6>[ 1.860684] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input1
  3520. <6>[ 1.860986] c0 s5p_gpioint_set_type irq:388 is at GPB(4)
  3521. <6>[ 1.863890] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_wtsr: enable WTSR
  3522. <6>[ 1.866540] c0 s5m-rtc s5m-rtc: s5m_rtc_enable_smpl: disable SMPL
  3523. <6>[ 1.869640] c0 s5m_rtc_enable_smpl: WTSR_SMPL(0x40)
  3524. <6>[ 1.871986] c0 s5m_rtc_read_alarm: 2000/0/1 0:0:0(-1)
  3525. <6>[ 1.873939] c0 using rtc device, s5m-rtc, for alarms
  3526. <6>[ 1.873996] c0 s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0
  3527. <6>[ 1.874448] c0 s5m-rtc s5m-rtc: RTC CHIP NAME: s5m-rtc
  3528. <4>[ 1.874518] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  3529. <6>[ 1.874907] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1
  3530. <6>[ 1.875070] c0 i2c /dev entries driver
  3531. <6>[ 1.876799] c0 Linux media interface: v0.10
  3532. <6>[ 1.876984] c0 lirc_dev: IR Remote Control driver registered, major 248
  3533. <6>[ 1.877024] c0 IR NEC protocol handler initialized
  3534. <6>[ 1.877053] c0 IR RC5(x) protocol handler initialized
  3535. <6>[ 1.877082] c0 IR RC6 protocol handler initialized
  3536. <6>[ 1.877110] c0 IR JVC protocol handler initialized
  3537. <6>[ 1.877138] c0 IR Sony protocol handler initialized
  3538. <6>[ 1.877166] c0 IR RC5 (streamzap) protocol handler initialized
  3539. <6>[ 1.877198] c0 IR LIRC bridge handler initialized
  3540. <6>[ 1.877225] c0 Linux video capture interface: v2.00
  3541. <6>[ 1.877278] c0 v4l2_i2c_drv_init: ISX012 init
  3542. <6>[ 1.877554] c0 v4l2_i2c_drv_init: SR130PC20 called
  3543. <6>[ 1.877819] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully
  3544. <6>[ 1.877900] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully
  3545. <2>[ 1.877993] c0 Initialize JPEG driver
  3546. <6>[ 1.880502] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  3547. <6>[ 1.880665] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  3548. <4>[ 1.880881] c0 S5P HPD Driver, (c) 2009 Samsung Electronics
  3549. <6>[ 1.881104] c0 s5p_int_src_ext_hpd()
  3550. <6>[ 1.881133] c0 s5p_hpd_read_gpio(0)
  3551. <6>[ 1.881313] c0 s5p_hpd_read_gpio(0)
  3552. <6>[ 1.881571] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully
  3553. <4>[ 1.881642] c0 i2c-core: driver [s5p_ddc] using legacy suspend method
  3554. <4>[ 1.881677] c0 i2c-core: driver [s5p_ddc] using legacy resume method
  3555. <6>[ 1.881940] c0 mfc_init_mem_mgr[581] cma 0x58100000 0x5b200000 0x3100000 0x3100000 1
  3556. <6>[ 1.881996] c0 mfc_init_mem_mgr[641]: base 0x58100000, size 0x3100000, addr 0xd8100000
  3557. <6>[ 1.882293] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully
  3558. <6>[ 1.882792] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics
  3559. <6>[ 1.883231] c0 sii9234_cfg_gpio()
  3560. <6>[ 1.883285] c0 Registered interrupt support for gpio group 10.
  3561. <6>[ 1.883323] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  3562. <6>[ 1.883437] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.
  3563. <6>[ 1.883721] c0 s5p_gpioint_set_type irq:397 is at GPF3(5)
  3564. <6>[ 1.883835] c0 sii9234 : create mhl sysfile
  3565. <6>[ 1.884384] c0 input: sii9234_rcp as /devices/virtual/input/input2
  3566. <3>[ 1.935630] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  3567. <3>[ 1.941996] c0 power_supply sec-fuelgauge: driver failed to report `status' property
  3568. <6>[ 1.949839] c0 wake enabled for irq 371
  3569. <7>[ 2.035034] c0 [keys] flip_cover_work : 1
  3570. <4>[ 2.058797] c0 i2c-core: driver [sec-fuelgauge] using legacy suspend method
  3571. <4>[ 2.058835] c0 i2c-core: driver [sec-fuelgauge] using legacy resume method
  3572. <6>[ 2.058888] c0 func:max77693_charger_init
  3573. <6>[ 2.059004] c0 max77693_charger_probe: MAX77693 Charger driver probe
  3574. <3>[ 2.065441] c0 power_supply sec-charger: driver failed to report `power_now' property
  3575. <6>[ 2.072985] c0 sec-fuelgauge 14-0036: fg_check_status_reg: addr(0x00), data(0x0400)
  3576. <6>[ 2.073914] c0 sec-fuelgauge 14-0036: sec_fg_irq_thread: Fuel-alert alerted!
  3577. <6>[ 2.076232] c0 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Abnormal Current Consumption jump by -7 units
  3578. <6>[ 2.076287] c0 sec-fuelgauge 14-0036: sec_hal_fg_fuelalert_process: Last Reported SOC (0).
  3579. <3>[ 2.076333] c0 sec_hal_fg_fuelalert_process: Fail to get psy (battery)
  3580. <3>[ 2.085168] c0 power_supply sec-charger: driver failed to report `power_now' property
  3581. <6>[ 2.094615] c0 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  3582. <6>[ 2.095069] c0 cpuidle: using governor ladder
  3583. <6>[ 2.095308] c0 cpuidle: using governor menu
  3584. <6>[ 2.095374] c0 mshci: Mobile Storage Host Controller Interface driver
  3585. <6>[ 2.095410] c0 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
  3586. <6>[ 2.095609] c0 dw_mmc dw_mmc: clock source 0: sclk_dwmci (13333333 Hz)
  3587. <3>[ 2.096887] c0 mmc0: Version ID 0x5342240a.
  3588. <6>[ 2.100876] c0 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
  3589. <6>[ 2.102316] c0 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
  3590. <6>[ 2.102424] c0 sdhci: Secure Digital Host Controller Interface driver
  3591. <6>[ 2.102459] c0 sdhci: Copyright(c) Pierre Ossman
  3592. <6>[ 2.102607] c0 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)
  3593. <6>[ 2.102796] c0 mmc1: vtf_2.8v regulator found
  3594. <7>[ 2.102914] c0 Registered led device: mmc1::
  3595. <6>[ 2.104753] c0 sdhci_set_ios : MMC Card ON samsung-hsmmc
  3596. <6>[ 2.104821] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
  3597. <6>[ 2.105082] c0 wake enabled for irq 380
  3598. <6>[ 2.105107] c0 mmc1: card removed.
  3599. <6>[ 2.105220] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)
  3600. <3>[ 2.105322] c0 mmc2: no vmmc regulator found
  3601. <7>[ 2.108245] c0 Registered led device: mmc2::
  3602. <6>[ 2.108453] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
  3603. <6>[ 2.111095] c0 usbcore: registered new interface driver usbhid
  3604. <6>[ 2.111129] c0 usbhid: USB HID core driver
  3605. <6>[ 2.111570] c0 logger: created 2048K log 'log_main'
  3606. <6>[ 2.111725] c0 logger: created 256K log 'log_events'
  3607. <6>[ 2.111867] c0 logger: created 1024K log 'log_radio'
  3608. <6>[ 2.112007] c0 logger: created 256K log 'log_system'
  3609. <6>[ 2.112041] c0 sec_getlog_supply_loggerinfo: 0xc0c18638 0xc0e18638 0xc0f18638 0xc0f58638
  3610. <6>[ 2.113038] c0 successful, position = 5
  3611. <6>[ 2.113246] c0 input: accelerometer as /devices/virtual/input/input3
  3612. <6>[ 2.113514] c0 Registered sensors device: accelerometer_sensor
  3613. <3>[ 2.113652] c0 geomagnetic_probe, is called
  3614. <6>[ 2.116655] c0 input: geomagnetic as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input4
  3615. <6>[ 2.117073] c0 input: geomagnetic_raw as /devices/platform/i2c-gpio.10/i2c-10/10-002e/input/input5
  3616. <6>[ 2.117310] c0 geomagnetic_probe: set from board file.
  3617. <6>[ 2.117344] c0 geomagnetic_probe: yas magnetic position is 7
  3618. <6>[ 2.117674] c0 geomagnetic_probe: yamaha magnetic sensor id = 2
  3619. <4>[ 2.117820] c0 i2c-core: driver [yas532] using legacy suspend method
  3620. <4>[ 2.117857] c0 i2c-core: driver [yas532] using legacy resume method
  3621. <6>[ 2.118386] c0 input: orientation as /devices/virtual/input/input6
  3622. <6>[ 2.118655] c0 cm3323_i2c_probe is called.
  3623. <6>[ 2.119124] c0 cm3323_setup_reg is success.
  3624. <6>[ 2.119327] c0 input: light_sensor as /devices/virtual/input/input7
  3625. <6>[ 2.119675] c0 Registered sensors device: light_sensor
  3626. <6>[ 2.119721] c0 cm3323_i2c_probe is success.
  3627. <6>[ 2.119829] c0 ir_remocon_probe start!
  3628. <3>[ 2.130847] c0 mmc0: cmd 52 response timeout error
  3629. <3>[ 2.134999] c0 mmc0: cmd 52 response timeout error
  3630. <3>[ 2.143048] c0 mmc0: cmd 8 response timeout error
  3631. <3>[ 2.147120] c0 mmc0: cmd 5 response timeout error
  3632. <3>[ 2.151776] c0 mmc0: cmd 5 response timeout error
  3633. <3>[ 2.156460] c0 mmc0: cmd 5 response timeout error
  3634. <3>[ 2.161147] c0 mmc0: cmd 5 response timeout error
  3635. <3>[ 2.165924] c0 mmc0: cmd 55 response timeout error
  3636. <3>[ 2.170674] c0 mmc0: cmd 55 response timeout error
  3637. <3>[ 2.175414] c0 mmc0: cmd 55 response timeout error
  3638. <3>[ 2.180187] c0 mmc0: cmd 55 response timeout error
  3639. <6>[ 2.201844] c0 mmc0: MAG2GC: 1501004d41473247430035c8b06b60bd
  3640. <6>[ 2.275752] c0 8. irda_fw_update: chip : 0202, bin : 0202, latest FW_ver
  3641. <6>[ 2.309116] c0 mmc0 : 20 : 00 : 01400312 : 1400312.
  3642. <6>[ 2.309149] c0 mmc0 : enable PON feature : 20 : 00 : 01400312
  3643. <4>[ 2.317038] c0 mmc0: Voltage range not supported for power class.
  3644. <3>[ 2.317075] c0 mmc0: power class selection to bus width 8 failed
  3645. <4>[ 2.339016] c0 mmc0: Voltage range not supported for power class.
  3646. <3>[ 2.339052] c0 mmc0: power class selection to bus width 8 ddr 2 failed
  3647. <6>[ 2.344505] c0 mmc0: new high speed DDR MMC card at address 0001
  3648. <6>[ 2.344901] c0 mmcblk0: mmc0:0001 MAG2GC 14.6 GiB
  3649. <6>[ 2.348923] c0 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
  3650. <6>[ 2.380199] c0 mckernelapi : Mobicore API module initialized!
  3651. <6>[ 2.380259] c0 mcdrvkmod mcd: MobiCore Driver, Build: Wed Feb 27 21:20:52 2019
  3652. <6>[ 2.380300] c0 mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
  3653. <6>[ 2.380336] c0 mcdrvkmod mcd: MobiCore *** SAMSUNG_Exynos4x12_Release_tbase-200_V005 ###
  3654. <6>[ 2.381166] c0 usbcore: registered new interface driver snd-usb-audio
  3655. <6>[ 2.382195] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
  3656. <6>[ 2.382348] c0 audss_init: RCLK SRC[busclk]
  3657. <7>[ 2.382974] c0 i2s_txctrl: Turn Off - spr is no active
  3658. <6>[ 2.389177] c0 sdhci_set_ios : MMC Card OFF samsung-hsmmc
  3659. <4>[ 2.523309] c0 wm8994-codec wm8994-codec: Failed to request Mic detect IRQ: -22
  3660. <4>[ 2.523351] c0 wm8994-codec wm8994-codec: Failed to request Jack detect IRQ: -22
  3661. <6>[ 2.557476] c0 Sound: enabled mclk
  3662. <7>[ 2.557504] c0 pmu_debug: 0x00000900
  3663. <6>[ 2.567524] c0 Sound: state: 1, use_cnt: 1
  3664. <3>[ 2.569959] c0 wm8994-codec wm8994-codec: dapm: unknown pin FM In
  3665. <3>[ 2.574620] c0 wm8994-codec wm8994-codec: dapm: unknown pin Third Mic
  3666. <6>[ 2.588386] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok
  3667. <6>[ 2.593248] c0 asoc: wm8994-aif2 <-> tab3.cp mapping ok
  3668. <6>[ 2.594483] c0 asoc: wm8994-aif3 <-> tab3.bt mapping ok
  3669. <7>[ 2.594587] c0 i2s_txctrl: Turn Off - spr is no active
  3670. <7>[ 2.596001] c0 migrating range 702a0 702c0, retry (0)
  3671. <7>[ 2.614094] c0 migrating range 702c0 702e0, retry (0)
  3672. <6>[ 2.631763] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok
  3673. <6>[ 2.633387] c0 Samsung SRP driver, (c)2011 Samsung Electronics
  3674. <6>[ 2.634387] c0 ALSA device list:
  3675. <6>[ 2.634412] c0 #0: TAB3_WM1811
  3676. <6>[ 2.634567] c0 GACT probability NOT on
  3677. <6>[ 2.634600] c0 Mirror/redirect action on
  3678. <6>[ 2.634627] c0 u32 classifier
  3679. <6>[ 2.634646] c0 Actions configured
  3680. <6>[ 2.634671] c0 Netfilter messages via NETLINK v0.30.
  3681. <6>[ 2.634766] c0 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  3682. <6>[ 2.635976] c0 ctnetlink v0.93: registering with nfnetlink.
  3683. <6>[ 2.636058] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  3684. <6>[ 2.636097] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  3685. <6>[ 2.636485] c0 xt_time: kernel timezone is -0000
  3686. <6>[ 2.638560] c0 ip_tables: (C) 2000-2006 Netfilter Core Team
  3687. <6>[ 2.638849] c0 arp_tables: (C) 2002 David S. Miller
  3688. <6>[ 2.638940] c0 TCP cubic registered
  3689. <6>[ 2.638964] c0 Initializing XFRM netlink socket
  3690. <6>[ 2.639910] c0 NET: Registered protocol family 10
  3691. <6>[ 2.643314] c0 Mobile IPv6
  3692. <6>[ 2.643370] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team
  3693. <6>[ 2.643823] c0 IPv6 over IPv4 tunneling driver
  3694. <6>[ 2.649104] c0 NET: Registered protocol family 17
  3695. <6>[ 2.649163] c0 NET: Registered protocol family 15
  3696. <5>[ 2.649422] c0 Bridge firewalling registered
  3697. <6>[ 2.649665] c0 Bluetooth: RFCOMM TTY layer initialized
  3698. <6>[ 2.649727] c0 Bluetooth: RFCOMM socket layer initialized
  3699. <6>[ 2.649760] c0 Bluetooth: RFCOMM ver 1.11
  3700. <6>[ 2.649786] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3701. <6>[ 2.649818] c0 Bluetooth: BNEP filters: protocol multicast
  3702. <6>[ 2.649851] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  3703. <6>[ 2.650052] c0 NET: Registered protocol family 35
  3704. <5>[ 2.650364] c0 Registering the dns_resolver key type
  3705. <6>[ 2.650437] c0 EXYNOS4X12: Adaptive Support Voltage init
  3706. <6>[ 2.650469] c0 EXYNOS4X12(SG): ORIG : 0 MOD : 0 RESULT : 0
  3707. <6>[ 2.650514] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  3708. <5>[ 2.650582] c0 Registering SWP/SWPB emulation handler
  3709. <5>[ 2.650619] c0 Registering SDIV/UDIV emulation handler
  3710. <6>[ 2.650666] c0 DVFS : VDD_ARM Voltage table set with 0 Group
  3711. <6>[ 2.651396] c0 DVFS : VDD_INT Voltage table set with 0 Group
  3712. <6>[ 2.651710] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14
  3713. <6>[ 2.651756] c0 s5p_tmu_probe: cpufreq_level[14], busfreq_value[100100]
  3714. <6>[ 2.651793] c0 @@@ get_refresh_interval = 0x2e
  3715. <6>[ 2.651819] c0 @@@ get_refresh_interval = 0x5d
  3716. <6>[ 2.651851] c0 ** temperature set value **
  3717. <6>[ 2.651871] c0 1st throttling stop_temp = 78, start_temp = 80
  3718. <6>[ 2.651901] c0 2nd throttling stop_temp = 87, start_tmep = 103
  3719. <6>[ 2.651931] c0 tripping temp = 110, s/w emergency temp = 120
  3720. <6>[ 2.651966] c0 mem throttling stop_temp = 80, start_temp = 85
  3721. <6>[ 2.652001] c0 tc_voltage stop_temp = 13, start_temp = 10
  3722. <6>[ 2.655238] c0 zswap: loading zswap
  3723. <6>[ 2.655655] c0 zswap: using lzo compressor
  3724. <4>[ 2.661533] c0 regulator_init_complete: vdd_int range: incomplete constraints, leaving on
  3725. <4>[ 2.662113] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on
  3726. <4>[ 2.663198] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on
  3727. <6>[ 2.664477] c0 s5m-rtc s5m-rtc: setting system clock to 2012-01-01 00:05:14 UTC (1325376314)
  3728. <7>[ 2.664611] c0 ctrl->mem.size = 0x1a00000
  3729. <7>[ 2.664636] c0 ctrl->mem.base = 0x6dd00000
  3730. <6>[ 2.665088] c0 FIMC0 registered successfully
  3731. <7>[ 2.665266] c0 ctrl->mem.size = 0x500000
  3732. <7>[ 2.665293] c0 ctrl->mem.base = 0x0
  3733. <6>[ 2.665550] c0 FIMC1 registered successfully
  3734. <7>[ 2.665710] c0 ctrl->mem.size = 0x0
  3735. <7>[ 2.665733] c0 ctrl->mem.base = 0x0
  3736. <6>[ 2.665996] c0 FIMC2 registered successfully
  3737. <7>[ 2.666157] c0 ctrl->mem.size = 0x0
  3738. <7>[ 2.666180] c0 ctrl->mem.base = 0xffffffea
  3739. <6>[ 2.666444] c0 FIMC3 registered successfully
  3740. <6>[ 2.666643] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics
  3741. <6>[ 2.691989] c0 Freeing init memory: 276K
  3742. <0>[ 2.693074] c1 Kernel panic - not syncing: Attempted to kill init!
  3743. <4>[ 2.697823] c1 Backtrace:
  3744. <4>[ 2.700515] c1 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  3745. <4>[ 2.709185] c1 r7:ed842000 r6:c035e5e0 r5:c078f774 r4:c0bb3c48
  3746. <4>[ 2.715096] c1 [<c078e33c>] (dump_stack+0x0/0x24) from [<c078f61c>] (panic+0xac/0x204)
  3747. <4>[ 2.723000] c1 [<c078f570>] (panic+0x0/0x204) from [<c00a6078>] (complete_and_exit+0x0/0x2c)
  3748. <4>[ 2.731406] c1 r3:c078f570 r2:ed843dc0 r1:00000001 r0:c095630c
  3749. <4>[ 2.737291] c1 r7:ed842000
  3750. <4>[ 2.740103] c1 [<c00a5748>] (do_exit+0x0/0x930) from [<c00a6100>] (do_group_exit+0x44/0xe4)
  3751. <4>[ 2.748420] c1 r7:ed842000
  3752. <4>[ 2.751192] c1 [<c00a60bc>] (do_group_exit+0x0/0xe4) from [<c00b82dc>] (get_signal_to_deliver+0x374/0x594)
  3753. <4>[ 2.760833] c1 r7:ed842000 r6:ed2fba88 r5:ed2fba8c r4:ed842000
  3754. <4>[ 2.766727] c1 [<c00b7f68>] (get_signal_to_deliver+0x0/0x594) from [<c00572b0>] (do_signal+0x78/0x5b4)
  3755. <4>[ 2.776031] c1 [<c0057238>] (do_signal+0x0/0x5b4) from [<c0057b80>] (do_notify_resume+0x68/0x74)
  3756. <4>[ 2.784800] c1 [<c0057b18>] (do_notify_resume+0x0/0x74) from [<c0053c58>] (work_pending+0x24/0x28)
  3757. <4>[ 2.793730] c1 r4:0000040f r3:00000000
  3758. <2>[ 2.797574] c0 CPU0: stopping
  3759. <4>[ 2.800481] c0 Backtrace:
  3760. <4>[ 2.803187] c0 [<c0058244>] (dump_backtrace+0x0/0x120) from [<c078e35c>] (dump_stack+0x20/0x24)
  3761. <4>[ 2.811852] c0 r7:00000006 r6:c004b2d4 r5:c0b01480 r4:00000000
  3762. <4>[ 2.817767] c0 [<c078e33c>] (dump_stack+0x0/0x24) from [<c004d73c>] (do_IPI+0x354/0x374)
  3763. <4>[ 2.825835] c0 [<c004d3e8>] (do_IPI+0x0/0x374) from [<c0053580>] (__irq_svc+0x80/0x160)
  3764. <4>[ 2.833814] c0 Exception stack(0xc0a17ea0 to 0xc0a17ee8)
  3765. <4>[ 2.839114] c0 7ea0: b23dc382 4effa33a 026a47e2 0009a91f c0bb128c c00d2aa8 c23d61b8 c0a16020
  3766. <4>[ 2.847532] c0 7ec0: c23d61c8 c0c178b0 00000000 c0a17f1c 4effa33a c0a17ee8 c00d29a8 c006c284
  3767. <4>[ 2.855948] c0 7ee0: 80000013 ffffffff
  3768. <4>[ 2.859695] c0 [<c006c234>] (exynos4_enter_idle+0x0/0x1c8) from [<c05269c8>] (cpuidle_idle_call+0xdc/0x36c)
  3769. <4>[ 2.869400] c0 r8:c23d61c8 r7:c0a16020 r6:c23d61b8 r5:00000000 r4:c0bb0c04
  3770. <4>[ 2.876352] c0 [<c05268ec>] (cpuidle_idle_call+0x0/0x36c) from [<c0054d18>] (cpu_idle+0x13c/0x174)
  3771. <4>[ 2.885298] c0 [<c0054bdc>] (cpu_idle+0x0/0x174) from [<c077c9bc>] (rest_init+0xf0/0xf4)
  3772. <4>[ 2.893366] c0 [<c077c8cc>] (rest_init+0x0/0xf4) from [<c0008d04>] (start_kernel+0x5b0/0x5bc)
  3773. <4>[ 2.901864] c0 r4:c0b014ac r3:c077c8cc
  3774. <4>[ 2.905689] c0 [<c0008754>] (start_kernel+0x0/0x5bc) from [<40008040>] (0x40008040)
  3775. <6>[ 2.913333] c1 notifier_call_chain : NOTIFY BAD sec_debug_panic_handler
  3776. <0>[ 2.919943] c1 Rebooting in 1 seconds..
  3777. <0>[ 3.921867] c1 sec_reboot (104, emergency)
  3778.  
  3779. Samsung S-Boot 4.0 for SM-T310 (Feb 16 2017 - 16:22:56)
  3780.  
  3781. EXYNOS4212(EVT 1.0) / 2044MB / 0MB / Rev 6 / T310XXSBQB5 /(PKG_ID 0x500f028)
  3782.  
  3783. BOOTLOADER VERSION : T310XXSBQB5
  3784.  
  3785. PMIC rev = PASS2(4)
  3786. CHECK PWROFFSRC = 0x00
  3787. CHECK RTC PWROFFSRC = 0x00
  3788. [s5m8767] update LDO2 onoff[1]
  3789. [s5m8767] update LDO4 onoff[1]
  3790. [s5m8767] update LDO5 onoff[0]
  3791. [s5m8767] update LDO6 onoff[1]
  3792. [s5m8767] update LDO7 onoff[1]
  3793. [s5m8767] update LDO8 onoff[1]
  3794. [s5m8767] update LDO9 vol[1800]
  3795. [s5m8767] update LDO10 onoff[1]
  3796. [s5m8767] update LDO11 vol[1950], onoff[1]
  3797. [s5m8767] update LDO12 onoff[1]
  3798. [s5m8767] update LDO13 onoff[0]
  3799. [s5m8767] update LDO14 vol[1950], onoff[1]
  3800. [s5m8767] update LDO15 onoff[1]
  3801. [s5m8767] update LDO16 onoff[1]
  3802. [s5m8767] update LDO19 vol[1900]
  3803. [s5m8767] update LDO20 vol[3300]
  3804. [s5m8767] update LDO21 vol[3300]
  3805. [s5m8767] update LDO22 vol[2800]
  3806. [s5m8767] update LDO27 vol[1500]
  3807. cardtype: 0x00000007
  3808. SB_MMC_HS_52MHZ_1_8V_3V_IO
  3809. mmc->card_caps: 0x00000311
  3810. mmc->host_caps: 0x00000311
  3811. [mmc] capacity = 30777344
  3812. Current SBOOT version : VERSION_-+A1
  3813. - read_bl1
  3814. pit_check_signature (PIT) valid.
  3815. initialize_ddi_data: usable! (7:0xe)
  3816. [RPMB] emmc_rpmb_open:
  3817. Get DATA success.
  3818.  
  3819. [RPMB] emmc_rpmb_close:
  3820. initialize_rpmb_data: usable! (SM-T310:VERSION_-+A1)
  3821. PARAM ENV VERSION: v1.0..
  3822. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3823. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3824. set_charger_state: buck(1), chg(1), reg(0x05)
  3825. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3826. set_auto_current: ta_state(1), curr(1800)
  3827. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3828. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3829. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3830. set_charger_state: buck(1), chg(1), reg(0x05)
  3831. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3832. set_auto_current: ta_state(1), curr(1800)
  3833. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3834. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3835. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3836. set_charger_state: buck(1), chg(0), reg(0x04)
  3837. init_fuelgauge: Start!!
  3838. check_battery_type: ADC of the BATT_ID(729)
  3839. check_battery_type: BATTERY TYPE(0)
  3840. init_fuelgauge: Battery type : SDI
  3841. init_fuelgauge: FG Capacity(0x21f6), LearnCFG(0x77), CGain(0x3fa1)
  3842. get_CGAIN: CGain = 0x3fa1
  3843. init_fuelgauge: Already initialized (0x21f6, SDI type)
  3844. fuel_gauge_read_vfsoc: VFSOC(0), data(0x0000)
  3845. fuel_gauge_read_soc: SOC(0), data(0x00d4)
  3846. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3847. fuel_gauge_compensate_soc: Start!!
  3848. fuel_gauge_read_soc: SOC(0), data(0x00d4)
  3849. fuel_gauge_read_vcell: VCELL(3585), data(0xb344)
  3850. calculate_table_soc: Get table SOC in case of charging!!
  3851. calculate_table_soc: i(8), vcell(3585), table_soc(2)
  3852. differ(2), table_soc(2), RepSOC(0)
  3853. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3854. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3855. set_charger_state: buck(1), chg(1), reg(0x05)
  3856. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3857. set_auto_current: ta_state(1), curr(1800)
  3858. set_charger_current: input(0x5a) : 1800mA charge(0xb6) : 1800mA
  3859. init_microusb_ic: before MUIC: CDETCTRL:0x2d
  3860. init_microusb_ic: after MUIC: CDETCTRL:0x2d
  3861. init_microusb_ic: MUIC: CONTROL1:0x00
  3862. init_microusb_ic: MUIC: CONTROL1:0x00
  3863. init_microusb_ic: MUIC: CONTROL2:0x3b
  3864. init_microusb_ic: MUIC: CONTROL2:0x3b
  3865. ====================
  3866. s5m8767 pmic register
  3867. ====================
  3868. ID = 0x05
  3869. ONSRC = 0x04
  3870. STATUS1 = 0x00
  3871. STATUS2 = 0x16
  3872. STATUS3 = 0x07
  3873. IRQ1 = 0x00
  3874. IRQ2 = 0x20
  3875. IRQ3 = 0x00
  3876. PWROFFSRC = 0x00
  3877. PMIC_RTC_WTSR_SMPL_REG = 0x00
  3878. S5M8767_REG_BUCHG = 0x6f
  3879. s5p_check_keypad: 0x10100000
  3880. s5p_check_keypad: recovery mode
  3881. set_oneshot_recovery: recovery mode set! sys_bootm=0x80000
  3882. s5p_check_reboot_mode: INFORM3 = 0 ... skip
  3883. s5p_check_upload: MAGIC(0x66262564), RST_STAT(0x20000000)
  3884. s5p_check_upload: debug level is 4f4c!
  3885. s5p_check_upload: level low or unknown: skip 0
  3886. s5p_check_download: 0
  3887. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3888. microusb_get_attached_device: STATUS1:0x3f, 2:0x43
  3889. check_pm_status: normal reset, do not enter LPM mode.
  3890. AST_POWERON..
  3891. scr_draw_image: draw 'logo.jpg'...
  3892. read 'logo.jpg'(55175) completed.
  3893. cmu_div:10, div:1, src_clk:800000000, pixel_clk:72161280
  3894. s5p_dsim_display_config: VIDEO MODE
  3895. 5E, 8C, 10,
  3896. BL_ID : 3
  3897. <start_checksum:481>CHECKSUM_HEADER_SECTOR :4096
  3898. <start_checksum:483>offset:50, size:6296
  3899. <start_checksum:485>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:25
  3900. Not Need Movinand Checksum
  3901. Movinand Checksum Confirmation Pass
  3902. [mobi_drv] add: 0x43e51c40, size: 3933
  3903. MobiCore INIT response = 0
  3904. MobiCore RTM has initialized!
  3905. MobiCore IDLE flag = 0
  3906. MobiCore driver address 43e51c40, size = 3933
  3907. MobiCore RTM Notified back!
  3908. MobiCore Driver loaded and RTM IDLE!
  3909. MobiCore RTM has been uninitialized!
  3910. Set debug level to low(4f4c)
  3911. load_kernel: loading boot image from 163840..
  3912. Verify_Binary_Signature: failed.
  3913. pit_check_signature (RECOVERY) invalid.
  3914. Set invalid sign flag
  3915. No need to update kernel type.
  3916.  
  3917. SMC Num = 0x83000001
  3918.  
  3919. mobismc success!!! [ret = 0]
  3920. [s5p_check_sboot_version_rpmb]cur_version:VERSION_-+A1, rpmb_version:VERSION_-+A1
  3921. rpmb_version:49, cur_version:49
  3922. DDI value :0x0000000e
  3923. [MMC] Set write protection (boot partition)
  3924. ATAG_CORE: 5 54410001 0 0 0
  3925. ATAG_MEM: 4 54410002 20000000 40000000
  3926. ATAG_MEM: 4 54410002 1FC00000 60000000
  3927. ATAG_MEM: 4 54410002 20000000 80000000
  3928. ATAG_MEM: 4 54410002 20000000 A0000000
  3929. ATAG_SERIAL: 4 54410006 430035c8 b06b60bd
  3930. ATAG_INITRD2: 4 54420005 42000000 376ea5
  3931. ATAG_REVISION: 3 54410007 6
  3932. ATAG_CMDLINE: ab 54410009 'console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x5ec00000 sysscope=0xee000000 lcdtype=2049 consoleblank=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=67 cordon=96b2bfe166deae488c98e52f6557e7f6 connie=SM-T310_OPEN_EUR_9a5af274667403d284637885df63b500 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=T310XXSBQB5 androidboot.selinux=enforcing androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=430035c8b06b60bd snd_soc_core.pmdown_time=1000'
  3933. ATAG_NONE: 0 0
  3934.  
  3935. Starting kernel at 0x40008000...
  3936.  
  3937. SWITCH_SEL(3)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!