Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@FEDEXTESTLINUX /]# dmesg && cat /var/log/message
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.32-504.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Wed Oct 15 04:27:16 UTC 2014
- Command line: ro root=/dev/mapper/vg_fedextestlinux-lv_root rd_LVM_LV=vg_fedextestlinux/lv_swap rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_fedextestlinux/lv_root rd_NO_DM rhgb quiet
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- Centaur CentaurHauls
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
- BIOS-e820: 000000003fff0000 - 0000000040000000 (ACPI data)
- BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
- DMI 2.5 present.
- SMBIOS version 2.5 @ 0xFFF60
- DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
- e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR variable ranges disabled:
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- CPU MTRRs all blank - virtualized system.
- initial memory mapped : 0 - 20000000
- init_memory_mapping: 0000000000000000-000000003fff0000
- 0000000000 - 003fe00000 page 2M
- 003fe00000 - 003fff0000 page 4k
- kernel direct mapping tables up to 3fff0000 @ 8000-b000
- RAMDISK: 36d5a000 - 37fefd93
- ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
- ACPI: XSDT 000000003fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
- ACPI: FACP 000000003fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
- ACPI: DSDT 000000003fff0470 01BF1 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
- ACPI: FACS 000000003fff0200 00040
- ACPI: APIC 000000003fff0240 0005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
- ACPI: SSDT 000000003fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
- ACPI: Local APIC address 0xfee00000
- Setting APIC routing to flat.
- No NUMA configuration found
- Faking a node at 0000000000000000-000000003fff0000
- Bootmem setup node 0 0000000000000000-000000003fff0000
- NODE_DATA [0000000000009000 - 000000000003cfff]
- bootmap [000000000003d000 - 0000000000044fff] pages 8
- (7 early reservations) ==> bootmem [0000000000 - 003fff0000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- #2 [0001000000 - 000202abe4] TEXT DATA BSS ==> [0001000000 - 000202abe4]
- #3 [0036d5a000 - 0037fefd93] RAMDISK ==> [0036d5a000 - 0037fefd93]
- #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
- #5 [000202b000 - 000202b13c] BRK ==> [000202b000 - 000202b13c]
- #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
- found SMP MP-table at [ffff88000009fff0] 9fff0
- crashkernel=auto resulted in zero bytes of reserved memory.
- [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002600000-ffff8800033fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000001 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00100000
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000001 -> 0x0000009f
- 0: 0x00000100 -> 0x0003fff0
- On node 0 totalpages: 262030
- DMA zone: 56 pages used for memmap
- DMA zone: 100 pages reserved
- DMA zone: 3842 pages, LIFO batch:0
- DMA32 zone: 3528 pages used for memmap
- DMA32 zone: 254504 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x4008
- ACPI: Local APIC address 0xfee00000
- Setting APIC routing to flat.
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
- PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
- Allocating PCI resources starting at 40000000 (gap: 40000000:bffc0000)
- Booting paravirtualized kernel on bare hardware
- NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 31 pages/cpu @ffff880002200000 s95064 r8192 d23720 u1048576
- pcpu-alloc: s95064 r8192 d23720 u1048576 alloc=1*2097152
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Node order, mobility grouping on. Total pages: 258346
- Policy zone: DMA32
- Kernel command line: ro root=/dev/mapper/vg_fedextestlinux-lv_root rd_LVM_LV=vg_fedextestlinux/lv_swap rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_LVM_LV=vg_fedextestlinux/lv_root rd_NO_DM rhgb quiet
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Checking aperture...
- No AGP bridge found
- Memory: 997444k/1048512k available (5336k kernel code, 392k absent, 50676k reserved, 7016k data, 1292k init)
- Hierarchical RCU implementation.
- NR_IRQS:33024 nr_irqs:424
- Console: colour VGA+ 80x25
- console [tty0] enabled
- allocated 4194304 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Fast TSC calibration using PIT
- Detected 2893.833 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.66 BogoMIPS (lpj=2893833)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- Mount-cache hash table entries: 256
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- Initializing cgroup subsys perf_event
- Initializing cgroup subsys net_prio
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 0 MCE banks
- ACPI: Core revision 20090903
- ftrace: converting mcount calls to 0f 1f 44 00 00
- ftrace: allocating 21917 entries in 86 pages
- APIC routing finalized to flat.
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Core(TM) i5-3470T CPU @ 2.90GHz stepping 09
- Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
- NMI watchdog disabled (cpu0): hardware events not enabled
- Booting Node 0, Processors #1 Ok.
- mce: CPU supports 0 MCE banks
- Brought up 2 CPUs
- Total of 2 processors activated (11575.33 BogoMIPS).
- sizeof(vma)=200 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=592 bytes
- sizeof(dentry)=192 bytes
- sizeof(ext3inode)=800 bytes
- sizeof(buffer_head)=104 bytes
- sizeof(skbuff)=232 bytes
- sizeof(task_struct)=2656 bytes
- devtmpfs: initialized
- regulator: core version 0.5
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
- PCI: root bus 00: using default resources
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
- pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
- pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
- pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
- pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
- pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
- pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
- pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
- pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
- pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
- pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
- pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
- pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
- pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
- pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
- pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:00:02.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
- PCI: pci_cache_line_size set to 64 bytes
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- Switching to clocksource jiffies
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [io 0x0060]
- pnp 00:01: [io 0x0064]
- pnp 00:01: [irq 1]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
- pnp 00:02: [io 0x0000-0x000f]
- pnp 00:02: [io 0x0080-0x008f]
- pnp 00:02: [io 0x00c0-0x00df]
- pnp 00:02: [dma 4]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:03: [irq 12]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
- pnp 00:04: [io 0x0378-0x037f]
- pnp 00:04: [io 0x0778-0x077f]
- pnp 00:04: [irq 7]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
- pnp: PnP ACPI: found 5 devices
- ACPI: ACPI bus type pnp unregistered
- Switching to clocksource acpi_pm
- pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
- TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- pci 0000:00:01.0: Activating ISA DMA hang workarounds
- pci 0000:00:02.0: Boot video device
- alloc irq_desc for 22 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- pci 0000:00:06.0: PCI INT A disabled
- alloc irq_desc for 19 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:0b.0: PCI INT A disabled
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 19031k freed
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- futex hash table entries: 512 (order: 3, 32768 bytes)
- audit: initializing netlink socket (disabled)
- type=2000 audit(1436668458.333:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 1985
- SELinux: Registering netfilter hooks
- alg: No test for stdrng (krng)
- ksign: Installing public key data
- Loading keyring
- - Added public key FEBCF26ABFDA92DD
- - User ID: CentOS (Kernel Module GPG key)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- ACPI: AC Adapter [AC] (on-line)
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- ACPI: Power Button [PWRF]
- input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
- ACPI: Sleep Button [SLPF]
- ACPI: acpi_idle registered with cpuidle
- [Firmware Bug]: No valid trip found
- GHES: HEST is not enabled!
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- crash memory driver: version 1.1
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input2
- Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ehci_hcd 0000:00:0b.0: EHCI Host Controller
- ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
- ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-504.el6.x86_64 ehci_hcd
- usb usb1: SerialNumber: 0000:00:0b.0
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- ohci_hcd 0000:00:06.0: OHCI Host Controller
- ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
- ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: OHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-504.el6.x86_64 ohci_hcd
- usb usb2: SerialNumber: 0000:00:06.0
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 8 ports detected
- uhci_hcd: USB Universal Host Controller Interface driver
- PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one day, 114 bytes nvram
- cpuidle: using governor ladder
- cpuidle: using governor menu
- EFI Variables Facility v0.08 2004-May-17
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- GRE over IPv4 demultiplexor driver
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- registered taskstats version 1
- rtc_cmos rtc_cmos: setting system clock to 2015-07-12 02:34:19 UTC (1436668459)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 1292k freed
- Write protecting the kernel read-only data: 10240k
- Freeing unused kernel memory: 788k freed
- Freeing unused kernel memory: 1568k freed
- input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
- dracut: dracut-004-356.el6
- dracut: rd_NO_LUKS: removing cryptoluks activation
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- udev: starting version 147
- dracut: Starting plymouth daemon
- dracut: rd_NO_DM: removing DM RAID activation
- dracut: rd_NO_MD: removing MD RAID activation
- ahci 0000:00:0d.0: version 3.0
- alloc irq_desc for 21 on node -1
- alloc kstat_irqs on node -1
- ahci 0000:00:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- ahci: SSS flag set, parallel bus scan disabled
- ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
- scsi0 : ahci
- ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
- usb 2-1: new full speed USB device number 2 using ohci_hcd
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
- ata1.00: 83886080 sectors, multi 128: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
- ata_piix 0000:00:01.1: version 2.13
- scsi1 : ata_piix
- scsi2 : ata_piix
- ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
- ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
- usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
- usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
- usb 2-1: Product: USB Tablet
- usb 2-1: Manufacturer: VirtualBox
- usb 2-1: configuration #1 chosen from 1 choice
- input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
- generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
- ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
- ata3.00: configured for UDMA/33
- scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
- ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- STARTING CRC_T10DIF
- sd 0:0:0:0: [sda] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
- sd 0:0:0:0: [sda] Attached SCSI disk
- sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
- Uniform CD-ROM driver Revision: 3.20
- sr 2:0:0:0: Attached scsi CD-ROM sr0
- Refined TSC clocksource calibration: 2893.645 MHz.
- Switching to clocksource tsc
- dracut: Scanning devices sda2 for LVM logical volumes vg_fedextestlinux/lv_swap vg_fedextestlinux/lv_root
- dracut: inactive '/dev/vg_fedextestlinux/lv_root' [37.54 GiB] inherit
- dracut: inactive '/dev/vg_fedextestlinux/lv_swap' [1.97 GiB] inherit
- EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
- dracut: Mounted root filesystem /dev/mapper/vg_fedextestlinux-lv_root
- dracut: Loading SELinux policy
- type=1404 audit(1436668461.301:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- SELinux: 2048 avtab hash slots, 294585 rules.
- SELinux: 2048 avtab hash slots, 294585 rules.
- SELinux: 9 users, 12 roles, 4142 types, 228 bools, 1 sens, 1024 cats
- SELinux: 81 classes, 294585 rules
- SELinux: Completing initialization.
- SELinux: Setting up existing superblocks.
- SELinux: initialized (dev dm-0, type ext4), uses xattr
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
- SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
- SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
- SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
- SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev proc, type proc), uses genfs_contexts
- SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
- SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- type=1403 audit(1436668462.092:3): policy loaded auid=4294967295 ses=4294967295
- dracut:
- dracut: Switching root
- udev: starting version 147
- Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- Intel ICH 0000:00:05.0: setting latency timer to 64
- intel8x0_measure_ac97_clock: measured 51423 usecs (10836 samples)
- intel8x0: measured clock 210722 rejected
- intel8x0_measure_ac97_clock: measured 50936 usecs (7200 samples)
- intel8x0: measured clock 141353 rejected
- intel8x0_measure_ac97_clock: measured 54394 usecs (7200 samples)
- intel8x0: measured clock 132367 rejected
- intel8x0: clocking to 48000
- e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- e1000: Copyright (c) 1999-2006 Intel Corporation.
- e1000 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:52:2b:9d
- e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
- piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 2:0:0:0: Attached scsi generic sg1 type 5
- parport_pc 00:04: reported by Plug and Play ACPI
- microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19
- platform microcode: firmware: requesting intel-ucode/06-3a-09
- microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19
- platform microcode: firmware: requesting intel-ucode/06-3a-09
- Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- ppdev: user-space parallel port driver
- microcode: CPU0 update to revision 0x1b failed
- microcode: CPU1 update to revision 0x1b failed
- microcode: CPU0 update to revision 0x1b failed
- microcode: CPU1 update to revision 0x1b failed
- microcode: CPU0 update to revision 0x1b failed
- microcode: CPU1 update to revision 0x1b failed
- microcode: CPU0 update to revision 0x1b failed
- microcode: CPU1 update to revision 0x1b failed
- microcode: CPU0 update to revision 0x1b failed
- microcode: CPU1 update to revision 0x1b failed
- EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
- SELinux: initialized (dev sda1, type ext4), uses xattr
- Adding 2064380k swap on /dev/mapper/vg_fedextestlinux-lv_swap. Priority:-1 extents:1 across:2064380k
- SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- nf_conntrack version 0.5.0 (7969 buckets, 31876 max)
- ip_tables: (C) 2000-2006 Netfilter Core Team
- e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
- type=1305 audit(1436682876.991:4): audit_pid=1243 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- 8021q: adding VLAN 0 to HW filter on device eth0
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- eth0: no IPv6 routers present
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
- mtrr: no MTRR for e0000000,c00000 found
- fuse init (API version 7.14)
- hrtimer: interrupt took 5090799 ns
- cat: /var/log/message: No such file or directory
- [root@FEDEXTESTLINUX /]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement