SHARE
TWEET

I9300 Beta11

a guest Jul 12th, 2015 276 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ehci s5p-ehci: suspend root hub
  2. <6>[ 4912.727131] c2 s5p-ehci s5p-ehci: host_phy_susp
  3. <6>[ 4912.727180] c2 s5p_ehci_runtime_suspend: usage=0, child=0
  4. <6>[ 4912.801664] c0 pet_watchdog_timer_fn kicking...be65
  5. <4>[ 4913.108466] c3 lsm330dlc_gyro_work_func, use last data(-128, 184, -52), status=0, selftest=0
  6. <4>[ 4913.443292] c2 lsm330dlc_gyro_work_func, use last data(16, 200, 36), status=0, selftest=0
  7. <6>[ 4916.565661] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  8. <6>[ 4916.565765] c0 s5p-ehci s5p-ehci: host_phy_resume
  9. <6>[ 4916.565896] c0 s5p_ehci_runtime_resume: usage=1, child=0
  10. <7>[ 4916.565950] c0 usb usb1: usb auto-resume
  11. <7>[ 4916.565991] c0 s5p-ehci s5p-ehci: resume root hub
  12. <7>[ 4916.591825] c0 hub 1-0:1.0: hub_resume
  13. <7>[ 4916.591971] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  14. <7>[ 4916.592154] c0 usb 1-2: usb auto-resume
  15. <7>[ 4916.592258] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  16. <6>[ 4916.593505] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  17. <7>[ 4916.626787] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  18. <6>[ 4916.641787] c0 mif: usb_port_resume: 1283, 4
  19. <7>[ 4916.641869] c0 usb 1-2: finish resume
  20. <7>[ 4916.842699] c3 usb 1-2: usb auto-suspend
  21. <7>[ 4916.956743] c3 hub 1-0:1.0: hub_suspend
  22. <7>[ 4916.956815] c3 usb usb1: bus auto-suspend
  23. <7>[ 4916.956860] c3 s5p-ehci s5p-ehci: suspend root hub
  24. <6>[ 4916.957073] c3 s5p-ehci s5p-ehci: host_phy_susp
  25. <6>[ 4916.957126] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  26. <6>[ 4917.577190] c1 max17047_get_soc: SOC(92, 9126 / 9821)
  27. <6>[ 4917.579268] c1 [317] bat: s(92, 22), v(4316, 98), t(52.6), cs(1, 1), cb(3), cr(999, 1000), t(2130)
  28. <4>[ 4917.584410] c3 healthd: max77693-charger: Unknown power supply type
  29. <4>[ 4917.585837] c3 healthd: battery [l=92 v=4316 t=52.6 h=2 st=2] c=0 dock-battery none chg=a
  30. <6>[ 4917.801659] c0 pet_watchdog_timer_fn kicking...be65
  31. <4>[ 4919.428250] c1 lsm330dlc_gyro_work_func, use last data(78, 250, -67), status=0, selftest=0
  32. <4>[ 4920.113903] c0 lsm330dlc_gyro_work_func, use last data(-108, 237, -114), status=0, selftest=0
  33. <6>[ 4920.525476] c0 cm36651_work_func_light, red = 4476 green = 5402 blue = 3005 white = 6396
  34. <6>[ 4922.801655] c0 pet_watchdog_timer_fn kicking...be65
  35. <4>[ 4923.133058] c0 lsm330dlc_gyro_work_func, use last data(206, -74, -25), status=0, selftest=0
  36. <6>[ 4923.203014] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
  37. <6>[ 4923.203088] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
  38. <6>[ 4923.203234] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
  39. <6>[ 4923.203301] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
  40. <6>[ 4923.203360] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
  41. <6>[ 4923.203867] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
  42. <4>[ 4923.208111] c0 lsm330dlc_gyro_work_func, use last data(-209, -13, 36), status=0, selftest=0
  43. <7>[ 4923.270504] c0 i2s_txctrl:Turn on
  44. <6>[ 4923.632228] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  45. <6>[ 4923.632333] c0 s5p-ehci s5p-ehci: host_phy_resume
  46. <6>[ 4923.632500] c0 s5p_ehci_runtime_resume: usage=1, child=0
  47. <7>[ 4923.632571] c0 usb usb1: usb auto-resume
  48. <7>[ 4923.632618] c0 s5p-ehci s5p-ehci: resume root hub
  49. <7>[ 4923.661733] c0 hub 1-0:1.0: hub_resume
  50. <7>[ 4923.661818] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  51. <7>[ 4923.661933] c0 usb 1-2: usb auto-resume
  52. <7>[ 4923.661991] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  53. <6>[ 4923.663534] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  54. <7>[ 4923.696760] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  55. <6>[ 4923.711738] c0 mif: usb_port_resume: 1283, 4
  56. <7>[ 4923.711814] c0 usb 1-2: finish resume
  57. <7>[ 4923.912840] c3 usb 1-2: usb auto-suspend
  58. <7>[ 4924.026732] c3 hub 1-0:1.0: hub_suspend
  59. <7>[ 4924.026821] c3 usb usb1: bus auto-suspend
  60. <7>[ 4924.026870] c3 s5p-ehci s5p-ehci: suspend root hub
  61. <6>[ 4924.027859] c3 s5p-ehci s5p-ehci: host_phy_susp
  62. <6>[ 4924.027917] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  63. <4>[ 4926.293132] c0 lsm330dlc_gyro_work_func, use last data(-58, 63, -76), status=0, selftest=0
  64. <4>[ 4926.893778] c0 lsm330dlc_gyro_work_func, use last data(82, -238, -117), status=0, selftest=0
  65. <7>[ 4927.568980] c2 i2s_txctrl: Turn Off - spr is no active
  66. <6>[ 4927.569769] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
  67. <6>[ 4927.569843] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
  68. <6>[ 4927.801661] c0 pet_watchdog_timer_fn kicking...be66
  69. <4>[ 4928.108251] c0 lsm330dlc_gyro_work_func, use last data(44, -114, -76), status=0, selftest=0
  70. <4>[ 4929.393438] c0 lsm330dlc_gyro_work_func, use last data(369, -90, -127), status=0, selftest=0
  71. <4>[ 4929.658122] c0 lsm330dlc_gyro_work_func, use last data(239, -39, -41), status=0, selftest=0
  72. <6>[ 4932.101415] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  73. <6>[ 4932.101507] c1 s5p-ehci s5p-ehci: host_phy_resume
  74. <6>[ 4932.101666] c1 s5p_ehci_runtime_resume: usage=1, child=0
  75. <7>[ 4932.101713] c1 usb usb1: usb auto-resume
  76. <7>[ 4932.101746] c1 s5p-ehci s5p-ehci: resume root hub
  77. <7>[ 4932.131736] c0 hub 1-0:1.0: hub_resume
  78. <7>[ 4932.131820] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  79. <7>[ 4932.131911] c0 usb 1-2: usb auto-resume
  80. <7>[ 4932.131957] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  81. <6>[ 4932.133302] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  82. <7>[ 4932.166739] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  83. <6>[ 4932.181679] c0 mif: usb_port_resume: 1283, 4
  84. <7>[ 4932.181733] c0 usb 1-2: finish resume
  85. <7>[ 4932.382254] c3 usb 1-2: usb auto-suspend
  86. <7>[ 4932.496697] c3 hub 1-0:1.0: hub_suspend
  87. <7>[ 4932.496758] c3 usb usb1: bus auto-suspend
  88. <7>[ 4932.496798] c3 s5p-ehci s5p-ehci: suspend root hub
  89. <6>[ 4932.497806] c3 s5p-ehci s5p-ehci: host_phy_susp
  90. <6>[ 4932.497849] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  91. <6>[ 4932.801658] c0 pet_watchdog_timer_fn kicking...be66
  92. <6>[ 4933.179675] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
  93. <6>[ 4933.179733] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
  94. <6>[ 4933.179895] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
  95. <6>[ 4933.179963] c0 wm8994-codec wm8994-codec: _wm8994_set_fll ++
  96. <6>[ 4933.180015] c0 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
  97. <6>[ 4933.180525] c0 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
  98. <7>[ 4933.251399] c0 i2s_txctrl:Turn on
  99. <6>[ 4933.518406] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  100. <6>[ 4933.518529] c0 s5p-ehci s5p-ehci: host_phy_resume
  101. <6>[ 4933.518671] c0 s5p_ehci_runtime_resume: usage=1, child=0
  102. <7>[ 4933.518750] c0 usb usb1: usb auto-resume
  103. <7>[ 4933.518804] c0 s5p-ehci s5p-ehci: resume root hub
  104. <7>[ 4933.546714] c0 hub 1-0:1.0: hub_resume
  105. <7>[ 4933.546807] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  106. <7>[ 4933.546932] c0 usb 1-2: usb auto-resume
  107. <7>[ 4933.546997] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  108. <6>[ 4933.548202] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  109. <7>[ 4933.581769] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  110. <6>[ 4933.596694] c0 mif: usb_port_resume: 1283, 4
  111. <7>[ 4933.596768] c0 usb 1-2: finish resume
  112. <7>[ 4933.797757] c3 usb 1-2: usb auto-suspend
  113. <7>[ 4933.911990] c3 hub 1-0:1.0: hub_suspend
  114. <7>[ 4933.912081] c3 usb usb1: bus auto-suspend
  115. <7>[ 4933.912140] c3 s5p-ehci s5p-ehci: suspend root hub
  116. <6>[ 4933.912888] c3 s5p-ehci s5p-ehci: host_phy_susp
  117. <6>[ 4933.912939] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  118. <6>[ 4934.930688] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  119. <6>[ 4934.930802] c0 s5p-ehci s5p-ehci: host_phy_resume
  120. <6>[ 4934.930934] c0 s5p_ehci_runtime_resume: usage=1, child=0
  121. <7>[ 4934.930991] c0 usb usb1: usb auto-resume
  122. <7>[ 4934.931035] c0 s5p-ehci s5p-ehci: resume root hub
  123. <7>[ 4934.957032] c2 hub 1-0:1.0: hub_resume
  124. <7>[ 4934.957147] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  125. <7>[ 4934.957279] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  126. <7>[ 4934.957338] c2 usb 1-2: usb auto-resume
  127. <6>[ 4934.958606] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  128. <7>[ 4934.991904] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  129. <6>[ 4935.007110] c2 mif: usb_port_resume: 1283, 4
  130. <7>[ 4935.007202] c2 usb 1-2: finish resume
  131. <7>[ 4935.207447] c3 usb 1-2: usb auto-suspend
  132. <7>[ 4935.321706] c3 hub 1-0:1.0: hub_suspend
  133. <7>[ 4935.321763] c3 usb usb1: bus auto-suspend
  134. <7>[ 4935.321798] c3 s5p-ehci s5p-ehci: suspend root hub
  135. <6>[ 4935.322105] c3 s5p-ehci s5p-ehci: host_phy_susp
  136. <6>[ 4935.322145] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  137. <4>[ 4936.808232] c0 lsm330dlc_gyro_work_func, use last data(87, -23, 9), status=3, selftest=0
  138. <7>[ 4937.621731] c2 i2s_txctrl: Turn Off - spr is no active
  139. <6>[ 4937.622453] c2 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
  140. <6>[ 4937.622509] c2 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
  141. <6>[ 4937.801653] c0 pet_watchdog_timer_fn kicking...be65
  142. <6>[ 4939.167176] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  143. <6>[ 4939.167248] c3 s5p-ehci s5p-ehci: host_phy_resume
  144. <6>[ 4939.167362] c3 s5p_ehci_runtime_resume: usage=1, child=0
  145. <7>[ 4939.167400] c3 usb usb1: usb auto-resume
  146. <7>[ 4939.167436] c3 s5p-ehci s5p-ehci: resume root hub
  147. <7>[ 4939.196697] c3 hub 1-0:1.0: hub_resume
  148. <7>[ 4939.196755] c3 hub 1-0:1.0: port 2: status 0507 change 0000
  149. <7>[ 4939.196817] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  150. <7>[ 4939.196853] c3 usb 1-2: usb auto-resume
  151. <6>[ 4939.198529] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  152. <7>[ 4939.231673] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  153. <6>[ 4939.246680] c3 mif: usb_port_resume: 1283, 4
  154. <7>[ 4939.246726] c3 usb 1-2: finish resume
  155. <7>[ 4939.448003] c3 usb 1-2: usb auto-suspend
  156. <7>[ 4939.561731] c3 hub 1-0:1.0: hub_suspend
  157. <7>[ 4939.561800] c3 usb usb1: bus auto-suspend
  158. <7>[ 4939.561843] c3 s5p-ehci s5p-ehci: suspend root hub
  159. <6>[ 4939.562499] c3 s5p-ehci s5p-ehci: host_phy_susp
  160. <6>[ 4939.562552] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  161. <4>[ 4940.098179] c0 lsm330dlc_gyro_work_func, use last data(12, 23, -73), status=0, selftest=0
  162. <6>[ 4940.158275] c1 binder: undelivered transaction 5404734
  163. <6>[ 4940.455713] c3 [BT] bt_lpm_exit_lpm_locked.
  164. <6>[ 4940.460093] c3 [BT] bt_lpm_exit_lpm_locked.
  165. <6>[ 4940.461198] c3 [BT] bt_lpm_exit_lpm_locked.
  166. <6>[ 4940.463945] c3 [BT] bt_lpm_exit_lpm_locked.
  167. <6>[ 4940.465003] c3 [BT] bt_lpm_exit_lpm_locked.
  168. <6>[ 4940.465793] c3 [BT] bt_lpm_exit_lpm_locked.
  169. <6>[ 4940.574857] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  170. <6>[ 4940.574964] c0 s5p-ehci s5p-ehci: host_phy_resume
  171. <6>[ 4940.575093] c0 s5p_ehci_runtime_resume: usage=1, child=0
  172. <7>[ 4940.575148] c0 usb usb1: usb auto-resume
  173. <7>[ 4940.575189] c0 s5p-ehci s5p-ehci: resume root hub
  174. <7>[ 4940.601777] c2 hub 1-0:1.0: hub_resume
  175. <7>[ 4940.601876] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  176. <7>[ 4940.602022] c2 usb 1-2: usb auto-resume
  177. <7>[ 4940.602857] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  178. <6>[ 4940.603322] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  179. <7>[ 4940.636829] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  180. <6>[ 4940.651893] c2 mif: usb_port_resume: 1283, 4
  181. <7>[ 4940.651980] c2 usb 1-2: finish resume
  182. <7>[ 4940.853315] c2 usb 1-2: usb auto-suspend
  183. <7>[ 4940.966711] c2 hub 1-0:1.0: hub_suspend
  184. <7>[ 4940.966773] c2 usb usb1: bus auto-suspend
  185. <7>[ 4940.966813] c2 s5p-ehci s5p-ehci: suspend root hub
  186. <6>[ 4940.967262] c2 s5p-ehci s5p-ehci: host_phy_susp
  187. <6>[ 4940.967308] c2 s5p_ehci_runtime_suspend: usage=0, child=0
  188. <6>[ 4942.801661] c0 pet_watchdog_timer_fn kicking...be65
  189. <4>[ 4943.103059] c0 lsm330dlc_gyro_work_func, use last data(143, -28, 3), status=1, selftest=0
  190. <6>[ 4943.404482] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  191. <6>[ 4943.404779] c3 s5p-ehci s5p-ehci: host_phy_resume
  192. <6>[ 4943.404911] c3 s5p_ehci_runtime_resume: usage=1, child=0
  193. <7>[ 4943.404966] c3 usb usb1: usb auto-resume
  194. <7>[ 4943.405008] c3 s5p-ehci s5p-ehci: resume root hub
  195. <7>[ 4943.431726] c3 hub 1-0:1.0: hub_resume
  196. <7>[ 4943.431811] c3 hub 1-0:1.0: port 2: status 0507 change 0000
  197. <7>[ 4943.431921] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  198. <7>[ 4943.431968] c3 usb 1-2: usb auto-resume
  199. <6>[ 4943.433108] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  200. <7>[ 4943.466754] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  201. <6>[ 4943.481700] c3 mif: usb_port_resume: 1283, 4
  202. <7>[ 4943.481778] c3 usb 1-2: finish resume
  203. <7>[ 4943.682698] c3 usb 1-2: usb auto-suspend
  204. <7>[ 4943.796787] c3 hub 1-0:1.0: hub_suspend
  205. <7>[ 4943.796855] c3 usb usb1: bus auto-suspend
  206. <7>[ 4943.796898] c3 s5p-ehci s5p-ehci: suspend root hub
  207. <6>[ 4943.797085] c3 s5p-ehci s5p-ehci: host_phy_susp
  208. <6>[ 4943.797132] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  209. <4>[ 4946.153495] c0 lsm330dlc_gyro_work_func, use last data(160, -80, -158), status=0, selftest=0
  210. <6>[ 4947.615794] c3 max17047_get_soc: SOC(93, 9137 / 9821)
  211. <6>[ 4947.619627] c3 [318] bat: s(93, 11), v(4331, 111), t(52.1), cs(1, 1), cb(3), cr(999, 1000), t(2160)
  212. <6>[ 4947.619757] c3 battery_monitor_work: update wakelock(200)
  213. <4>[ 4947.627438] c3 healthd: max77693-charger: Unknown power supply type
  214. <4>[ 4947.629771] c3 healthd: battery [l=93 v=4331 t=52.1 h=2 st=2] c=0 dock-battery none chg=a
  215. <6>[ 4947.801658] c0 pet_watchdog_timer_fn kicking...be65
  216. <4>[ 4948.308193] c0 lsm330dlc_gyro_work_func, use last data(197, -2, -1), status=0, selftest=0
  217. <6>[ 4950.466910] c3 [BT] bt_lpm_exit_lpm_locked.
  218. <6>[ 4950.471900] c3 [BT] bt_lpm_exit_lpm_locked.
  219. <6>[ 4950.472941] c3 [BT] bt_lpm_exit_lpm_locked.
  220. <4>[ 4951.073503] c0 lsm330dlc_gyro_work_func, use last data(144, 63, -106), status=0, selftest=0
  221. <6>[ 4951.525046] c1 cm36651_work_func_light, red = 3406 green = 4296 blue = 2444 white = 5148
  222. <6>[ 4952.801695] c0 pet_watchdog_timer_fn kicking...be66
  223. <4>[ 4953.128397] c2 lsm330dlc_gyro_work_func, use last data(234, 12, -38), status=0, selftest=0
  224. <4>[ 4954.408824] c0 lsm330dlc_gyro_work_func, use last data(61, 84, 33), status=0, selftest=0
  225. <6>[ 4957.801664] c0 pet_watchdog_timer_fn kicking...be66
  226. <4>[ 4959.953273] c2 lsm330dlc_gyro_work_func, use last data(91, 70, -55), status=0, selftest=0
  227. <6>[ 4962.801660] c0 pet_watchdog_timer_fn kicking...be65
  228. <4>[ 4965.893154] c0 lsm330dlc_gyro_work_func, use last data(-157, 57, -76), status=0, selftest=0
  229. <6>[ 4967.801660] c0 pet_watchdog_timer_fn kicking...be65
  230. <6>[ 4972.801662] c0 pet_watchdog_timer_fn kicking...be66
  231. <6>[ 4973.062972] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  232. <6>[ 4973.063152] c0 s5p-ehci s5p-ehci: host_phy_resume
  233. <6>[ 4973.063323] c0 s5p_ehci_runtime_resume: usage=1, child=0
  234. <7>[ 4973.063440] c0 usb usb1: usb auto-resume
  235. <7>[ 4973.063515] c0 s5p-ehci s5p-ehci: resume root hub
  236. <7>[ 4973.091736] c3 hub 1-0:1.0: hub_resume
  237. <7>[ 4973.091846] c3 hub 1-0:1.0: port 2: status 0507 change 0000
  238. <7>[ 4973.091983] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  239. <7>[ 4973.092045] c3 usb 1-2: usb auto-resume
  240. <6>[ 4973.093274] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  241. <7>[ 4973.126781] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  242. <4>[ 4973.139249] c0 lsm330dlc_gyro_work_func, use last data(-37, -141, -78), status=1, selftest=0
  243. <6>[ 4973.143719] c3 mif: usb_port_resume: 1283, 4
  244. <7>[ 4973.143793] c3 usb 1-2: finish resume
  245. <7>[ 4973.342253] c0 usb 1-2: usb auto-suspend
  246. <7>[ 4973.456792] c0 hub 1-0:1.0: hub_suspend
  247. <7>[ 4973.456857] c0 usb usb1: bus auto-suspend
  248. <7>[ 4973.456896] c0 s5p-ehci s5p-ehci: suspend root hub
  249. <6>[ 4973.457677] c0 s5p-ehci s5p-ehci: host_phy_susp
  250. <6>[ 4973.457897] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  251. <6>[ 4977.801641] c0 pet_watchdog_timer_fn kicking...be66
  252. <6>[ 4978.707534] c1 max17047_get_soc: SOC(93, 9158 / 9821)
  253. <6>[ 4978.710117] c1 [319] bat: s(93, 21), v(4330, 108), t(52.0), cs(1, 1), cb(3), cr(999, 1000), t(2191)
  254. <4>[ 4978.717016] c1 healthd: max77693-charger: Unknown power supply type
  255. <4>[ 4978.720383] c1 healthd: battery [l=93 v=4330 t=52.0 h=2 st=2] c=0 dock-battery none chg=a
  256. <4>[ 4979.313104] c3 lsm330dlc_gyro_work_func, use last data(-76, 76, 33), status=0, selftest=0
  257. <6>[ 4980.535348] c3 [BT] bt_lpm_exit_lpm_locked.
  258. <6>[ 4980.539780] c3 [BT] bt_lpm_exit_lpm_locked.
  259. <6>[ 4980.541034] c3 [BT] bt_lpm_exit_lpm_locked.
  260. <6>[ 4980.543681] c3 [BT] bt_lpm_exit_lpm_locked.
  261. <6>[ 4980.544567] c3 [BT] bt_lpm_exit_lpm_locked.
  262. <6>[ 4980.545487] c3 [BT] bt_lpm_exit_lpm_locked.
  263. <4>[ 4981.094035] c1 lsm330dlc_gyro_work_func, use last data(124, 270, -42), status=0, selftest=0
  264. <6>[ 4982.525523] c0 cm36651_work_func_light, red = 4238 green = 5035 blue = 2867 white = 5816
  265. <6>[ 4982.801655] c0 pet_watchdog_timer_fn kicking...be65
  266. <4>[ 4982.948228] c3 lsm330dlc_gyro_work_func, use last data(49, -232, -63), status=0, selftest=0
  267. <4>[ 4984.118205] c0 lsm330dlc_gyro_work_func, use last data(-199, -75, 43), status=0, selftest=0
  268. <6>[ 4985.773700] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  269. <6>[ 4985.773842] c0 s5p-ehci s5p-ehci: host_phy_resume
  270. <6>[ 4985.773977] c0 s5p_ehci_runtime_resume: usage=1, child=0
  271. <7>[ 4985.774037] c0 usb usb1: usb auto-resume
  272. <7>[ 4985.774083] c0 s5p-ehci s5p-ehci: resume root hub
  273. <7>[ 4985.801748] c1 hub 1-0:1.0: hub_resume
  274. <7>[ 4985.801859] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  275. <7>[ 4985.801963] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  276. <7>[ 4985.802010] c1 usb 1-2: usb auto-resume
  277. <6>[ 4985.803093] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  278. <7>[ 4985.836818] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  279. <6>[ 4985.851955] c1 mif: usb_port_resume: 1283, 4
  280. <7>[ 4985.852051] c1 usb 1-2: finish resume
  281. <7>[ 4986.055286] c1 usb 1-2: usb auto-suspend
  282. <7>[ 4986.168311] c1 hub 1-0:1.0: hub_suspend
  283. <7>[ 4986.168401] c1 usb usb1: bus auto-suspend
  284. <7>[ 4986.168457] c1 s5p-ehci s5p-ehci: suspend root hub
  285. <6>[ 4986.169173] c1 s5p-ehci s5p-ehci: host_phy_susp
  286. <6>[ 4986.169244] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  287. <6>[ 4987.186006] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  288. <6>[ 4987.186942] c0 s5p-ehci s5p-ehci: host_phy_resume
  289. <6>[ 4987.187069] c0 s5p_ehci_runtime_resume: usage=1, child=0
  290. <7>[ 4987.187118] c0 usb usb1: usb auto-resume
  291. <7>[ 4987.187155] c0 s5p-ehci s5p-ehci: resume root hub
  292. <7>[ 4987.216680] c0 hub 1-0:1.0: hub_resume
  293. <7>[ 4987.216735] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  294. <7>[ 4987.216799] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  295. <7>[ 4987.216832] c0 usb 1-2: usb auto-resume
  296. <6>[ 4987.218166] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  297. <7>[ 4987.252176] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  298. <6>[ 4987.266678] c3 mif: usb_port_resume: 1283, 4
  299. <7>[ 4987.266734] c3 usb 1-2: finish resume
  300. <7>[ 4987.467460] c0 usb 1-2: usb auto-suspend
  301. <7>[ 4987.581737] c0 hub 1-0:1.0: hub_suspend
  302. <7>[ 4987.581801] c0 usb usb1: bus auto-suspend
  303. <7>[ 4987.581837] c0 s5p-ehci s5p-ehci: suspend root hub
  304. <6>[ 4987.582237] c0 s5p-ehci s5p-ehci: host_phy_susp
  305. <6>[ 4987.582279] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  306. <6>[ 4987.801659] c0 pet_watchdog_timer_fn kicking...be65
  307. <6>[ 4988.598285] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  308. <6>[ 4988.598383] c0 s5p-ehci s5p-ehci: host_phy_resume
  309. <6>[ 4988.598512] c0 s5p_ehci_runtime_resume: usage=1, child=0
  310. <7>[ 4988.598564] c0 usb usb1: usb auto-resume
  311. <7>[ 4988.598604] c0 s5p-ehci s5p-ehci: resume root hub
  312. <7>[ 4988.626717] c1 hub 1-0:1.0: hub_resume
  313. <7>[ 4988.626805] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  314. <7>[ 4988.626913] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  315. <7>[ 4988.626961] c1 usb 1-2: usb auto-resume
  316. <6>[ 4988.628189] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  317. <7>[ 4988.661731] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  318. <6>[ 4988.676708] c2 mif: usb_port_resume: 1283, 4
  319. <7>[ 4988.676779] c2 usb 1-2: finish resume
  320. <7>[ 4988.877677] c3 usb 1-2: usb auto-suspend
  321. <7>[ 4988.991734] c3 hub 1-0:1.0: hub_suspend
  322. <7>[ 4988.991813] c3 usb usb1: bus auto-suspend
  323. <7>[ 4988.991862] c3 s5p-ehci s5p-ehci: suspend root hub
  324. <6>[ 4988.992683] c3 s5p-ehci s5p-ehci: host_phy_susp
  325. <6>[ 4988.992756] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  326. <6>[ 4990.010608] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  327. <6>[ 4990.010720] c0 s5p-ehci s5p-ehci: host_phy_resume
  328. <6>[ 4990.010849] c0 s5p_ehci_runtime_resume: usage=1, child=0
  329. <7>[ 4990.010903] c0 usb usb1: usb auto-resume
  330. <7>[ 4990.010943] c0 s5p-ehci s5p-ehci: resume root hub
  331. <7>[ 4990.036826] c0 hub 1-0:1.0: hub_resume
  332. <7>[ 4990.036962] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  333. <7>[ 4990.037119] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  334. <7>[ 4990.037172] c0 usb 1-2: usb auto-resume
  335. <6>[ 4990.038420] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  336. <7>[ 4990.071822] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  337. <6>[ 4990.086744] c0 mif: usb_port_resume: 1283, 4
  338. <7>[ 4990.086855] c0 usb 1-2: finish resume
  339. <4>[ 4990.119418] c0 lsm330dlc_gyro_work_func, use last data(23, -138, 14), status=0, selftest=0
  340. <7>[ 4990.287802] c3 usb 1-2: usb auto-suspend
  341. <4>[ 4990.308113] c3 lsm330dlc_gyro_work_func, use last data(46, 2, 0), status=0, selftest=0
  342. <7>[ 4990.401745] c3 hub 1-0:1.0: hub_suspend
  343. <7>[ 4990.401823] c3 usb usb1: bus auto-suspend
  344. <7>[ 4990.401880] c3 s5p-ehci s5p-ehci: suspend root hub
  345. <6>[ 4990.402023] c3 s5p-ehci s5p-ehci: host_phy_susp
  346. <6>[ 4990.402080] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  347. <4>[ 4990.478645] c0 lsm330dlc_gyro_work_func, use last data(3, 33, 18), status=0, selftest=0
  348. <6>[ 4990.548968] c3 [BT] bt_lpm_exit_lpm_locked.
  349. <6>[ 4990.554083] c3 [BT] bt_lpm_exit_lpm_locked.
  350. <6>[ 4990.555048] c3 [BT] bt_lpm_exit_lpm_locked.
  351. <6>[ 4991.422933] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  352. <6>[ 4991.423081] c0 s5p-ehci s5p-ehci: host_phy_resume
  353. <6>[ 4991.423250] c0 s5p_ehci_runtime_resume: usage=1, child=0
  354. <7>[ 4991.423318] c0 usb usb1: usb auto-resume
  355. <7>[ 4991.423367] c0 s5p-ehci s5p-ehci: resume root hub
  356. <7>[ 4991.451695] c0 hub 1-0:1.0: hub_resume
  357. <7>[ 4991.451790] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  358. <7>[ 4991.451912] c0 usb 1-2: usb auto-resume
  359. <7>[ 4991.452664] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  360. <6>[ 4991.453013] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  361. <7>[ 4991.486762] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  362. <6>[ 4991.501786] c0 mif: usb_port_resume: 1283, 4
  363. <7>[ 4991.501867] c0 usb 1-2: finish resume
  364. <7>[ 4991.702729] c0 usb 1-2: usb auto-suspend
  365. <7>[ 4991.816701] c0 hub 1-0:1.0: hub_suspend
  366. <7>[ 4991.816763] c0 usb usb1: bus auto-suspend
  367. <7>[ 4991.816802] c0 s5p-ehci s5p-ehci: suspend root hub
  368. <6>[ 4991.817478] c0 s5p-ehci s5p-ehci: host_phy_susp
  369. <6>[ 4991.817526] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  370. <6>[ 4992.801657] c0 pet_watchdog_timer_fn kicking...be65
  371. <4>[ 4993.113257] c0 lsm330dlc_gyro_work_func, use last data(-135, -57, -56), status=3, selftest=0
  372. <4>[ 4993.188118] c2 lsm330dlc_gyro_work_func, use last data(124, 341, -105), status=0, selftest=0
  373. <4>[ 4994.118006] c0 lsm330dlc_gyro_work_func, use last data(56, 135, -179), status=0, selftest=0
  374. <4>[ 4994.958819] c0 lsm330dlc_gyro_work_func, use last data(177, -43, -139), status=0, selftest=0
  375. <4>[ 4995.164892] c2 lsm330dlc_gyro_work_func, use last data(-28, 162, 51), status=0, selftest=0
  376. <4>[ 4997.198084] c0 lsm330dlc_gyro_work_func, use last data(-20, 6, -101), status=0, selftest=0
  377. <6>[ 4997.801656] c0 pet_watchdog_timer_fn kicking...be66
  378. <4>[ 5001.163048] c0 lsm330dlc_gyro_work_func, use last data(-57, -108, 9), status=0, selftest=0
  379. <4>[ 5001.993313] c3 lsm330dlc_gyro_work_func, use last data(27, 152, -70), status=0, selftest=0
  380. <4>[ 5002.110615] c0 lsm330dlc_gyro_work_func, use last data(167, -85, -81), status=0, selftest=0
  381. <6>[ 5002.801688] c0 pet_watchdog_timer_fn kicking...be66
  382. <4>[ 5002.803241] c2 lsm330dlc_gyro_work_func, use last data(283, -3, 43), status=0, selftest=0
  383. <4>[ 5003.093481] c0 lsm330dlc_gyro_work_func, use last data(-285, -417, -187), status=0, selftest=0
  384. <4>[ 5003.633043] c0 lsm330dlc_gyro_work_func, use last data(254, -145, 7), status=1, selftest=0
  385. <6>[ 5006.087568] c0 lcd panel: brightness=221, bl=28, candela=220
  386. <6>[ 5006.958266] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  387. <6>[ 5006.958361] c0 s5p-ehci s5p-ehci: host_phy_resume
  388. <6>[ 5006.958473] c0 s5p_ehci_runtime_resume: usage=1, child=0
  389. <7>[ 5006.958505] c0 usb usb1: usb auto-resume
  390. <7>[ 5006.958528] c0 s5p-ehci s5p-ehci: resume root hub
  391. <7>[ 5006.986672] c0 hub 1-0:1.0: hub_resume
  392. <7>[ 5006.986720] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  393. <7>[ 5006.986787] c0 usb 1-2: usb auto-resume
  394. <7>[ 5006.986835] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  395. <6>[ 5006.988096] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  396. <7>[ 5007.021747] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  397. <6>[ 5007.036694] c0 mif: usb_port_resume: 1283, 4
  398. <7>[ 5007.036823] c0 usb 1-2: finish resume
  399. <7>[ 5007.237142] c3 usb 1-2: usb auto-suspend
  400. <7>[ 5007.351720] c3 hub 1-0:1.0: hub_suspend
  401. <7>[ 5007.351773] c3 usb usb1: bus auto-suspend
  402. <7>[ 5007.351806] c3 s5p-ehci s5p-ehci: suspend root hub
  403. <6>[ 5007.352645] c3 s5p-ehci s5p-ehci: host_phy_susp
  404. <6>[ 5007.352692] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  405. <6>[ 5007.801641] c0 pet_watchdog_timer_fn kicking...be66
  406. <6>[ 5008.370645] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  407. <6>[ 5008.370802] c0 s5p-ehci s5p-ehci: host_phy_resume
  408. <6>[ 5008.370957] c0 s5p_ehci_runtime_resume: usage=1, child=0
  409. <7>[ 5008.371034] c0 usb usb1: usb auto-resume
  410. <7>[ 5008.371085] c0 s5p-ehci s5p-ehci: resume root hub
  411. <7>[ 5008.396722] c0 hub 1-0:1.0: hub_resume
  412. <7>[ 5008.396807] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  413. <7>[ 5008.396946] c0 usb 1-2: usb auto-resume
  414. <7>[ 5008.397007] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  415. <6>[ 5008.398208] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  416. <7>[ 5008.431766] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  417. <6>[ 5008.446768] c0 mif: usb_port_resume: 1283, 4
  418. <7>[ 5008.446843] c0 usb 1-2: finish resume
  419. <4>[ 5008.533036] c0 lsm330dlc_gyro_work_func, use last data(-11, 28, -97), status=0, selftest=0
  420. <7>[ 5008.647398] c3 usb 1-2: usb auto-suspend
  421. <6>[ 5008.725468] c0 max17047_get_soc: SOC(93, 9169 / 9821)
  422. <6>[ 5008.729998] c0 battery_interval_calulation: raw soc(9198), weight(90)
  423. <6>[ 5008.730053] c0 battery_interval_calulation: weight(90)
  424. <6>[ 5008.730099] c0 battery_monitor_interval: apply weight(90), 30 -> 27
  425. <6>[ 5008.730160] c0 [320] bat: s(93, 11), v(4333, 109), t(52.5), cs(1, 1), cb(3), cr(999, 1000), t(2221)
  426. <4>[ 5008.738800] c3 healthd: max77693-charger: Unknown power supply type
  427. <4>[ 5008.740796] c3 healthd: battery [l=93 v=4333 t=52.5 h=2 st=2] c=0 dock-battery none chg=a
  428. <7>[ 5008.761761] c3 hub 1-0:1.0: hub_suspend
  429. <7>[ 5008.761829] c3 usb usb1: bus auto-suspend
  430. <7>[ 5008.761869] c3 s5p-ehci s5p-ehci: suspend root hub
  431. <6>[ 5008.762172] c3 s5p-ehci s5p-ehci: host_phy_susp
  432. <6>[ 5008.762218] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  433. <4>[ 5009.113620] c0 lsm330dlc_gyro_work_func, use last data(329, 262, -110), status=0, selftest=0
  434. <4>[ 5010.073245] c0 lsm330dlc_gyro_work_func, use last data(177, -21, 0), status=0, selftest=0
  435. <6>[ 5012.801650] c0 pet_watchdog_timer_fn kicking...be65
  436. <6>[ 5013.525200] c0 cm36651_work_func_light, red = 2119 green = 2934 blue = 1612 white = 3425
  437. <4>[ 5015.118091] c2 lsm330dlc_gyro_work_func, use last data(159, 254, -30), status=0, selftest=0
  438. <4>[ 5016.158463] c0 lsm330dlc_gyro_work_func, use last data(25, 243, 14), status=0, selftest=0
  439. <4>[ 5017.328549] c0 lsm330dlc_gyro_work_func, use last data(-119, 63, -51), status=0, selftest=0
  440. <6>[ 5017.801638] c0 pet_watchdog_timer_fn kicking...be65
  441. <6>[ 5018.256709] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  442. <6>[ 5018.256785] c0 s5p-ehci s5p-ehci: host_phy_resume
  443. <6>[ 5018.256906] c0 s5p_ehci_runtime_resume: usage=1, child=0
  444. <7>[ 5018.256942] c0 usb usb1: usb auto-resume
  445. <7>[ 5018.256969] c0 s5p-ehci s5p-ehci: resume root hub
  446. <7>[ 5018.287008] c0 hub 1-0:1.0: hub_resume
  447. <7>[ 5018.287058] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  448. <7>[ 5018.287127] c0 usb 1-2: usb auto-resume
  449. <7>[ 5018.287160] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  450. <6>[ 5018.288505] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  451. <7>[ 5018.321681] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  452. <6>[ 5018.336699] c1 mif: usb_port_resume: 1283, 4
  453. <7>[ 5018.336748] c1 usb 1-2: finish resume
  454. <7>[ 5018.537799] c3 usb 1-2: usb auto-suspend
  455. <7>[ 5018.651736] c3 hub 1-0:1.0: hub_suspend
  456. <7>[ 5018.651821] c3 usb usb1: bus auto-suspend
  457. <7>[ 5018.651865] c3 s5p-ehci s5p-ehci: suspend root hub
  458. <6>[ 5018.652042] c3 s5p-ehci s5p-ehci: host_phy_susp
  459. <6>[ 5018.652102] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  460. <6>[ 5019.669031] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  461. <6>[ 5019.669701] c0 s5p-ehci s5p-ehci: host_phy_resume
  462. <6>[ 5019.669842] c0 s5p_ehci_runtime_resume: usage=1, child=0
  463. <7>[ 5019.669907] c0 usb usb1: usb auto-resume
  464. <7>[ 5019.669959] c0 s5p-ehci s5p-ehci: resume root hub
  465. <7>[ 5019.696699] c0 hub 1-0:1.0: hub_resume
  466. <7>[ 5019.696778] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  467. <7>[ 5019.696890] c0 usb 1-2: usb auto-resume
  468. <7>[ 5019.696949] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  469. <6>[ 5019.698040] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  470. <7>[ 5019.731788] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  471. <6>[ 5019.746758] c0 mif: usb_port_resume: 1283, 4
  472. <7>[ 5019.746836] c0 usb 1-2: finish resume
  473. <7>[ 5019.947504] c3 usb 1-2: usb auto-suspend
  474. <7>[ 5020.061718] c3 hub 1-0:1.0: hub_suspend
  475. <7>[ 5020.061784] c3 usb usb1: bus auto-suspend
  476. <7>[ 5020.061828] c3 s5p-ehci s5p-ehci: suspend root hub
  477. <6>[ 5020.062042] c3 s5p-ehci s5p-ehci: host_phy_susp
  478. <6>[ 5020.062092] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  479. <6>[ 5020.628756] c3 [BT] bt_lpm_exit_lpm_locked.
  480. <6>[ 5020.633269] c3 [BT] bt_lpm_exit_lpm_locked.
  481. <6>[ 5020.634246] c3 [BT] bt_lpm_exit_lpm_locked.
  482. <6>[ 5020.637243] c3 [BT] bt_lpm_exit_lpm_locked.
  483. <6>[ 5020.638371] c3 [BT] bt_lpm_exit_lpm_locked.
  484. <6>[ 5020.639355] c3 [BT] bt_lpm_exit_lpm_locked.
  485. <6>[ 5022.801655] c0 pet_watchdog_timer_fn kicking...be66
  486. <6>[ 5027.801671] c0 pet_watchdog_timer_fn kicking...be66
  487. <4>[ 5028.753147] c0 lsm330dlc_gyro_work_func, use last data(52, 203, -202), status=0, selftest=0
  488. <4>[ 5029.136055] c0 lsm330dlc_gyro_work_func, use last data(47, -31, -52), status=0, selftest=0
  489. <6>[ 5030.642160] c3 [BT] bt_lpm_exit_lpm_locked.
  490. <6>[ 5030.647348] c3 [BT] bt_lpm_exit_lpm_locked.
  491. <6>[ 5030.648443] c3 [BT] bt_lpm_exit_lpm_locked.
  492. <6>[ 5030.967072] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  493. <6>[ 5030.967183] c0 s5p-ehci s5p-ehci: host_phy_resume
  494. <6>[ 5030.967373] c0 s5p_ehci_runtime_resume: usage=1, child=0
  495. <7>[ 5030.967454] c0 usb usb1: usb auto-resume
  496. <7>[ 5030.967497] c0 s5p-ehci s5p-ehci: resume root hub
  497. <7>[ 5030.996719] c1 hub 1-0:1.0: hub_resume
  498. <7>[ 5030.996806] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  499. <7>[ 5030.996916] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  500. <7>[ 5030.996970] c1 usb 1-2: usb auto-resume
  501. <6>[ 5030.998625] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  502. <7>[ 5031.031729] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  503. <6>[ 5031.046728] c1 mif: usb_port_resume: 1283, 4
  504. <7>[ 5031.046798] c1 usb 1-2: finish resume
  505. <7>[ 5031.247535] c3 usb 1-2: usb auto-suspend
  506. <7>[ 5031.362415] c3 hub 1-0:1.0: hub_suspend
  507. <7>[ 5031.362495] c3 usb usb1: bus auto-suspend
  508. <7>[ 5031.362547] c3 s5p-ehci s5p-ehci: suspend root hub
  509. <6>[ 5031.363577] c3 s5p-ehci s5p-ehci: host_phy_susp
  510. <6>[ 5031.363628] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  511. <6>[ 5032.801671] c0 pet_watchdog_timer_fn kicking...be65
  512. <4>[ 5033.358273] c0 lsm330dlc_gyro_work_func, use last data(-155, 162, -102), status=0, selftest=0
  513. <4>[ 5033.633125] c2 lsm330dlc_gyro_work_func, use last data(173, 63, -139), status=0, selftest=0
  514. <6>[ 5033.922176] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: SIOP_LEVEL=3
  515. <6>[ 5033.922260] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
  516. <6>[ 5037.643148] c1 max17047_get_soc: SOC(93, 9191 / 9821)
  517. <6>[ 5037.645966] c1 [321] bat: s(93, 22), v(4333, 107), t(52.3), cs(1, 1), cb(3), cr(999, 1000), t(2250)
  518. <4>[ 5037.658629] c3 healthd: max77693-charger: Unknown power supply type
  519. <4>[ 5037.665273] c3 healthd: battery [l=93 v=4333 t=52.3 h=2 st=2] c=0 dock-battery none chg=a
  520. <4>[ 5037.698241] c0 lsm330dlc_gyro_work_func, use last data(-122, -32, -2), status=0, selftest=0
  521. <6>[ 5037.801646] c0 pet_watchdog_timer_fn kicking...be65
  522. <6>[ 5037.846374] c0 logger_release: took 0 msec
  523. <6>[ 5039.441342] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  524. <6>[ 5039.441436] c0 s5p-ehci s5p-ehci: host_phy_resume
  525. <6>[ 5039.441561] c0 s5p_ehci_runtime_resume: usage=1, child=0
  526. <7>[ 5039.441608] c0 usb usb1: usb auto-resume
  527. <7>[ 5039.441707] c0 s5p-ehci s5p-ehci: resume root hub
  528. <7>[ 5039.471736] c0 hub 1-0:1.0: hub_resume
  529. <7>[ 5039.471826] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  530. <7>[ 5039.471946] c0 usb 1-2: usb auto-resume
  531. <7>[ 5039.472010] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  532. <6>[ 5039.473315] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  533. <7>[ 5039.506844] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  534. <6>[ 5039.521731] c0 mif: usb_port_resume: 1283, 4
  535. <7>[ 5039.521812] c0 usb 1-2: finish resume
  536. <7>[ 5039.727359] c0 usb 1-2: usb auto-suspend
  537. <7>[ 5039.841749] c0 hub 1-0:1.0: hub_suspend
  538. <7>[ 5039.841844] c0 usb usb1: bus auto-suspend
  539. <7>[ 5039.841902] c0 s5p-ehci s5p-ehci: suspend root hub
  540. <6>[ 5039.842819] c0 s5p-ehci s5p-ehci: host_phy_susp
  541. <6>[ 5039.842902] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  542. <4>[ 5040.108329] c0 lsm330dlc_gyro_work_func, use last data(199, -28, -12), status=3, selftest=0
  543. <6>[ 5042.801672] c0 pet_watchdog_timer_fn kicking...be65
  544. <6>[ 5043.678116] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  545. <6>[ 5043.678348] c0 s5p-ehci s5p-ehci: host_phy_resume
  546. <6>[ 5043.678496] c0 s5p_ehci_runtime_resume: usage=1, child=0
  547. <7>[ 5043.678563] c0 usb usb1: usb auto-resume
  548. <7>[ 5043.678610] c0 s5p-ehci s5p-ehci: resume root hub
  549. <7>[ 5043.706729] c0 hub 1-0:1.0: hub_resume
  550. <7>[ 5043.706814] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  551. <7>[ 5043.706926] c0 usb 1-2: usb auto-resume
  552. <7>[ 5043.706986] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  553. <6>[ 5043.708211] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  554. <7>[ 5043.741751] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  555. <6>[ 5043.756774] c0 mif: usb_port_resume: 1283, 4
  556. <7>[ 5043.756851] c0 usb 1-2: finish resume
  557. <7>[ 5043.957809] c3 usb 1-2: usb auto-suspend
  558. <7>[ 5044.071713] c3 hub 1-0:1.0: hub_suspend
  559. <7>[ 5044.071792] c3 usb usb1: bus auto-suspend
  560. <7>[ 5044.071837] c3 s5p-ehci s5p-ehci: suspend root hub
  561. <6>[ 5044.072705] c3 s5p-ehci s5p-ehci: host_phy_susp
  562. <6>[ 5044.072759] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  563. <6>[ 5044.525250] c0 cm36651_work_func_light, red = 3920 green = 4840 blue = 2592 white = 5508
  564. <4>[ 5045.803259] c0 lsm330dlc_gyro_work_func, use last data(-799, -2, 19), status=0, selftest=0
  565. <6>[ 5046.502856] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  566. <6>[ 5046.503077] c2 s5p-ehci s5p-ehci: host_phy_resume
  567. <6>[ 5046.503214] c2 s5p_ehci_runtime_resume: usage=1, child=0
  568. <7>[ 5046.503282] c2 usb usb1: usb auto-resume
  569. <7>[ 5046.503331] c2 s5p-ehci s5p-ehci: resume root hub
  570. <7>[ 5046.531705] c2 hub 1-0:1.0: hub_resume
  571. <7>[ 5046.531789] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  572. <7>[ 5046.531897] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  573. <7>[ 5046.531946] c2 usb 1-2: usb auto-resume
  574. <6>[ 5046.533080] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  575. <7>[ 5046.566763] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  576. <6>[ 5046.581726] c2 mif: usb_port_resume: 1283, 4
  577. <7>[ 5046.581810] c2 usb 1-2: finish resume
  578. <7>[ 5046.782697] c3 usb 1-2: usb auto-suspend
  579. <7>[ 5046.896746] c3 hub 1-0:1.0: hub_suspend
  580. <7>[ 5046.896815] c3 usb usb1: bus auto-suspend
  581. <7>[ 5046.896858] c3 s5p-ehci s5p-ehci: suspend root hub
  582. <6>[ 5046.897420] c3 s5p-ehci s5p-ehci: host_phy_susp
  583. <6>[ 5046.897477] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  584. <4>[ 5047.313375] c0 lsm330dlc_gyro_work_func, use last data(222, -61, 6), status=0, selftest=0
  585. <6>[ 5047.801672] c0 pet_watchdog_timer_fn kicking...be66
  586. <6>[ 5047.915144] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  587. <6>[ 5047.915250] c1 s5p-ehci s5p-ehci: host_phy_resume
  588. <6>[ 5047.915383] c1 s5p_ehci_runtime_resume: usage=1, child=0
  589. <7>[ 5047.915441] c1 usb usb1: usb auto-resume
  590. <7>[ 5047.915482] c1 s5p-ehci s5p-ehci: resume root hub
  591. <7>[ 5047.941831] c1 hub 1-0:1.0: hub_resume
  592. <7>[ 5047.941987] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  593. <7>[ 5047.942194] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  594. <7>[ 5047.942283] c1 usb 1-2: usb auto-resume
  595. <6>[ 5047.943318] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  596. <7>[ 5047.976836] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  597. <6>[ 5047.991694] c1 mif: usb_port_resume: 1283, 4
  598. <7>[ 5047.991767] c1 usb 1-2: finish resume
  599. <7>[ 5048.192845] c3 usb 1-2: usb auto-suspend
  600. <7>[ 5048.306918] c3 hub 1-0:1.0: hub_suspend
  601. <7>[ 5048.306970] c3 usb usb1: bus auto-suspend
  602. <7>[ 5048.307005] c3 s5p-ehci s5p-ehci: suspend root hub
  603. <6>[ 5048.307546] c3 s5p-ehci s5p-ehci: host_phy_susp
  604. <6>[ 5048.307587] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  605. <4>[ 5049.038415] c2 lsm330dlc_gyro_work_func, use last data(-110, 51, -20), status=0, selftest=0
  606. <6>[ 5049.327457] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  607. <6>[ 5049.327595] c0 s5p-ehci s5p-ehci: host_phy_resume
  608. <6>[ 5049.327763] c0 s5p_ehci_runtime_resume: usage=1, child=0
  609. <7>[ 5049.327823] c0 usb usb1: usb auto-resume
  610. <7>[ 5049.327866] c0 s5p-ehci s5p-ehci: resume root hub
  611. <7>[ 5049.356750] c1 hub 1-0:1.0: hub_resume
  612. <7>[ 5049.356840] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  613. <7>[ 5049.356963] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  614. <7>[ 5049.357016] c1 usb 1-2: usb auto-resume
  615. <6>[ 5049.358595] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  616. <7>[ 5049.391790] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  617. <6>[ 5049.406734] c1 mif: usb_port_resume: 1283, 4
  618. <7>[ 5049.406829] c1 usb 1-2: finish resume
  619. <7>[ 5049.608189] c1 usb 1-2: usb auto-suspend
  620. <7>[ 5049.721719] c1 hub 1-0:1.0: hub_suspend
  621. <7>[ 5049.721786] c1 usb usb1: bus auto-suspend
  622. <7>[ 5049.721825] c1 s5p-ehci s5p-ehci: suspend root hub
  623. <6>[ 5049.721942] c1 s5p-ehci s5p-ehci: host_phy_susp
  624. <6>[ 5049.721991] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  625. <6>[ 5050.861276] c2 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
  626. <6>[ 5050.861316] c2 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
  627. <6>[ 5050.861435] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
  628. <6>[ 5050.861484] c2 wm8994-codec wm8994-codec: _wm8994_set_fll ++
  629. <6>[ 5050.861521] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
  630. <6>[ 5050.862043] c2 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
  631. <7>[ 5050.930297] c0 i2s_txctrl:Turn on
  632. <6>[ 5052.801666] c0 pet_watchdog_timer_fn kicking...be66
  633. <6>[ 5053.564379] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  634. <6>[ 5053.566076] c0 s5p-ehci s5p-ehci: host_phy_resume
  635. <6>[ 5053.566211] c0 s5p_ehci_runtime_resume: usage=1, child=0
  636. <7>[ 5053.566267] c0 usb usb1: usb auto-resume
  637. <7>[ 5053.566305] c0 s5p-ehci s5p-ehci: resume root hub
  638. <7>[ 5053.592485] c0 hub 1-0:1.0: hub_resume
  639. <7>[ 5053.592679] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  640. <7>[ 5053.592888] c0 usb 1-2: usb auto-resume
  641. <7>[ 5053.592979] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  642. <4>[ 5053.593750] c1 lsm330dlc_gyro_work_func, use last data(183, -60, 46), status=0, selftest=0
  643. <6>[ 5053.594161] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  644. <7>[ 5053.626822] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  645. <6>[ 5053.641696] c0 mif: usb_port_resume: 1283, 4
  646. <7>[ 5053.641767] c0 usb 1-2: finish resume
  647. <7>[ 5053.842628] c3 usb 1-2: usb auto-suspend
  648. <7>[ 5053.956809] c3 hub 1-0:1.0: hub_suspend
  649. <7>[ 5053.956872] c3 usb usb1: bus auto-suspend
  650. <7>[ 5053.956904] c3 s5p-ehci s5p-ehci: suspend root hub
  651. <6>[ 5053.957379] c3 s5p-ehci s5p-ehci: host_phy_susp
  652. <6>[ 5053.957437] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  653. <4>[ 5054.120893] c0 lsm330dlc_gyro_work_func, use last data(-302, 157, -3), status=0, selftest=0
  654. <4>[ 5055.123251] c0 lsm330dlc_gyro_work_func, use last data(93, 13, -52), status=0, selftest=0
  655. <4>[ 5056.303497] c0 lsm330dlc_gyro_work_func, use last data(7, 125, -161), status=0, selftest=0
  656. <7>[ 5056.976734] c3 i2s_txctrl: Turn Off - spr is no active
  657. <6>[ 5056.977503] c3 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
  658. <6>[ 5056.977569] c3 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
  659. <6>[ 5057.801682] c0 pet_watchdog_timer_fn kicking...be65
  660. <4>[ 5058.108718] c0 lsm330dlc_gyro_work_func, use last data(194, -77, -6), status=0, selftest=0
  661. <4>[ 5059.134035] c0 lsm330dlc_gyro_work_func, use last data(662, 114, -350), status=0, selftest=0
  662. <4>[ 5060.403105] c2 lsm330dlc_gyro_work_func, use last data(-101, 142, -85), status=0, selftest=0
  663. <6>[ 5060.718927] c3 [BT] bt_lpm_exit_lpm_locked.
  664. <6>[ 5060.724255] c3 [BT] bt_lpm_exit_lpm_locked.
  665. <6>[ 5060.725586] c3 [BT] bt_lpm_exit_lpm_locked.
  666. <6>[ 5060.729868] c3 [BT] bt_lpm_exit_lpm_locked.
  667. <6>[ 5060.730806] c3 [BT] bt_lpm_exit_lpm_locked.
  668. <6>[ 5060.732098] c3 [BT] bt_lpm_exit_lpm_locked.
  669. <4>[ 5061.128121] c0 lsm330dlc_gyro_work_func, use last data(-81, 16, -19), status=0, selftest=0
  670. <4>[ 5062.458492] c0 lsm330dlc_gyro_work_func, use last data(4, -12, -47), status=0, selftest=0
  671. <6>[ 5062.801669] c0 pet_watchdog_timer_fn kicking...be65
  672. <4>[ 5063.116197] c0 lsm330dlc_gyro_work_func, use last data(113, 37, -28), status=0, selftest=0
  673. <4>[ 5063.843273] c2 lsm330dlc_gyro_work_func, use last data(471, 25, -145), status=0, selftest=0
  674. <4>[ 5063.939197] c0 lsm330dlc_gyro_work_func, use last data(13, -199, -1), status=0, selftest=0
  675. <6>[ 5064.004515] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=530
  676. <4>[ 5064.903442] c2 lsm330dlc_gyro_work_func, use last data(121, 44, -28), status=0, selftest=0
  677. <6>[ 5066.274988] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  678. <6>[ 5066.275072] c0 s5p-ehci s5p-ehci: host_phy_resume
  679. <6>[ 5066.275198] c0 s5p_ehci_runtime_resume: usage=1, child=0
  680. <7>[ 5066.275245] c0 usb usb1: usb auto-resume
  681. <7>[ 5066.275278] c0 s5p-ehci s5p-ehci: resume root hub
  682. <7>[ 5066.301717] c3 hub 1-0:1.0: hub_resume
  683. <7>[ 5066.301791] c3 hub 1-0:1.0: port 2: status 0507 change 0000
  684. <7>[ 5066.301927] c3 usb 1-2: usb auto-resume
  685. <7>[ 5066.301994] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  686. <6>[ 5066.303139] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  687. <7>[ 5066.336745] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  688. <6>[ 5066.351786] c3 mif: usb_port_resume: 1283, 4
  689. <7>[ 5066.351871] c3 usb 1-2: finish resume
  690. <7>[ 5066.554970] c3 usb 1-2: usb auto-suspend
  691. <7>[ 5066.666750] c3 hub 1-0:1.0: hub_suspend
  692. <7>[ 5066.666816] c3 usb usb1: bus auto-suspend
  693. <7>[ 5066.666857] c3 s5p-ehci s5p-ehci: suspend root hub
  694. <6>[ 5066.667345] c3 s5p-ehci s5p-ehci: host_phy_susp
  695. <6>[ 5066.667391] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  696. <6>[ 5067.687506] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  697. <6>[ 5067.687684] c1 s5p-ehci s5p-ehci: host_phy_resume
  698. <6>[ 5067.687844] c1 s5p_ehci_runtime_resume: usage=1, child=0
  699. <7>[ 5067.687900] c1 usb usb1: usb auto-resume
  700. <7>[ 5067.687942] c1 s5p-ehci s5p-ehci: resume root hub
  701. <7>[ 5067.716736] c1 hub 1-0:1.0: hub_resume
  702. <7>[ 5067.716821] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  703. <7>[ 5067.716939] c1 usb 1-2: usb auto-resume
  704. <7>[ 5067.717003] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  705. <6>[ 5067.718605] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  706. <7>[ 5067.751911] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  707. <6>[ 5067.766704] c1 mif: usb_port_resume: 1283, 4
  708. <7>[ 5067.766794] c1 usb 1-2: finish resume
  709. <6>[ 5067.801658] c0 pet_watchdog_timer_fn kicking...be66
  710. <7>[ 5067.968344] c3 usb 1-2: usb auto-suspend
  711. <7>[ 5068.081685] c3 hub 1-0:1.0: hub_suspend
  712. <7>[ 5068.081728] c3 usb usb1: bus auto-suspend
  713. <7>[ 5068.081754] c3 s5p-ehci s5p-ehci: suspend root hub
  714. <6>[ 5068.082006] c3 s5p-ehci s5p-ehci: host_phy_susp
  715. <6>[ 5068.082038] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  716. <6>[ 5069.868981] c3 max17047_get_soc: SOC(93, 9202 / 9821)
  717. <6>[ 5069.872903] c3 [322] bat: s(93, 11), v(4330, 102), t(51.8), cs(1, 1), cb(3), cr(999, 1000), t(2282)
  718. <4>[ 5069.880430] c3 healthd: max77693-charger: Unknown power supply type
  719. <4>[ 5069.882701] c3 healthd: battery [l=93 v=4330 t=51.8 h=2 st=2] c=0 dock-battery none chg=a
  720. <4>[ 5070.145091] c2 lsm330dlc_gyro_work_func, use last data(-99, 50, 50), status=0, selftest=0
  721. <6>[ 5070.729311] c3 [BT] bt_lpm_exit_lpm_locked.
  722. <6>[ 5070.734439] c3 [BT] bt_lpm_exit_lpm_locked.
  723. <6>[ 5070.735484] c3 [BT] bt_lpm_exit_lpm_locked.
  724. <6>[ 5071.924541] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  725. <6>[ 5071.924725] c0 s5p-ehci s5p-ehci: host_phy_resume
  726. <6>[ 5071.924886] c0 s5p_ehci_runtime_resume: usage=1, child=0
  727. <7>[ 5071.924981] c0 usb usb1: usb auto-resume
  728. <7>[ 5071.925049] c0 s5p-ehci s5p-ehci: resume root hub
  729. <7>[ 5071.951915] c0 hub 1-0:1.0: hub_resume
  730. <7>[ 5071.952036] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  731. <7>[ 5071.952181] c0 usb 1-2: usb auto-resume
  732. <7>[ 5071.952836] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  733. <6>[ 5071.953465] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  734. <7>[ 5071.986717] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  735. <6>[ 5072.002091] c0 mif: usb_port_resume: 1283, 4
  736. <7>[ 5072.002152] c0 usb 1-2: finish resume
  737. <7>[ 5072.203594] c3 usb 1-2: usb auto-suspend
  738. <7>[ 5072.316709] c3 hub 1-0:1.0: hub_suspend
  739. <7>[ 5072.316774] c3 usb usb1: bus auto-suspend
  740. <7>[ 5072.316825] c3 s5p-ehci s5p-ehci: suspend root hub
  741. <6>[ 5072.317149] c3 s5p-ehci s5p-ehci: host_phy_susp
  742. <6>[ 5072.317200] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  743. <6>[ 5072.801666] c0 pet_watchdog_timer_fn kicking...be66
  744. <4>[ 5074.309034] c0 lsm330dlc_gyro_work_func, use last data(140, -550, -105), status=3, selftest=0
  745. <6>[ 5074.748799] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  746. <6>[ 5074.748902] c0 s5p-ehci s5p-ehci: host_phy_resume
  747. <6>[ 5074.749031] c0 s5p_ehci_runtime_resume: usage=1, child=0
  748. <7>[ 5074.749083] c0 usb usb1: usb auto-resume
  749. <7>[ 5074.749123] c0 s5p-ehci s5p-ehci: resume root hub
  750. <7>[ 5074.776720] c0 hub 1-0:1.0: hub_resume
  751. <7>[ 5074.776812] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  752. <7>[ 5074.776928] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  753. <7>[ 5074.776979] c0 usb 1-2: usb auto-resume
  754. <6>[ 5074.778023] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  755. <4>[ 5074.793813] c0 lsm330dlc_gyro_work_func, use last data(67, -683, -29), status=0, selftest=0
  756. <7>[ 5074.811762] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  757. <6>[ 5074.826696] c0 mif: usb_port_resume: 1283, 4
  758. <7>[ 5074.826763] c0 usb 1-2: finish resume
  759. <4>[ 5074.878145] c0 lsm330dlc_gyro_work_func, use last data(98, -696, -71), status=3, selftest=0
  760. <7>[ 5075.027266] c3 usb 1-2: usb auto-suspend
  761. <7>[ 5075.146690] c3 hub 1-0:1.0: hub_suspend
  762. <7>[ 5075.146734] c3 usb usb1: bus auto-suspend
  763. <7>[ 5075.146759] c3 s5p-ehci s5p-ehci: suspend root hub
  764. <6>[ 5075.147189] c3 s5p-ehci s5p-ehci: host_phy_susp
  765. <6>[ 5075.147220] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  766. <6>[ 5075.248363] c3 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]
  767. <6>[ 5075.248410] c3 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]
  768. <6>[ 5075.248543] c3 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++
  769. <6>[ 5075.248595] c3 wm8994-codec wm8994-codec: _wm8994_set_fll ++
  770. <6>[ 5075.248640] c3 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --
  771. <6>[ 5075.249131] c3 I:P:DmaAddr=@2058000 Total=28160 PrdSz=3520 #Prds=8 dma_area=0xf4270000
  772. <7>[ 5075.315953] c0 i2s_txctrl:Turn on
  773. <6>[ 5075.524936] c0 cm36651_work_func_light, red = 4184 green = 4982 blue = 2832 white = 5820
  774. <4>[ 5076.133161] c3 lsm330dlc_gyro_work_func, use last data(284, -592, -110), status=0, selftest=0
  775. <4>[ 5076.163418] c0 lsm330dlc_gyro_work_func, use last data(262, -571, -156), status=0, selftest=0
  776. <6>[ 5077.573424] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  777. <6>[ 5077.573546] c0 s5p-ehci s5p-ehci: host_phy_resume
  778. <6>[ 5077.573683] c0 s5p_ehci_runtime_resume: usage=1, child=0
  779. <7>[ 5077.573747] c0 usb usb1: usb auto-resume
  780. <7>[ 5077.573798] c0 s5p-ehci s5p-ehci: resume root hub
  781. <7>[ 5077.601730] c2 hub 1-0:1.0: hub_resume
  782. <7>[ 5077.601846] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  783. <7>[ 5077.601961] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  784. <7>[ 5077.602014] c2 usb 1-2: usb auto-resume
  785. <6>[ 5077.603258] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  786. <7>[ 5077.636757] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  787. <6>[ 5077.651717] c2 mif: usb_port_resume: 1283, 4
  788. <7>[ 5077.651812] c2 usb 1-2: finish resume
  789. <6>[ 5077.801663] c0 pet_watchdog_timer_fn kicking...be66
  790. <7>[ 5077.853134] c3 usb 1-2: usb auto-suspend
  791. <7>[ 5077.966722] c3 hub 1-0:1.0: hub_suspend
  792. <7>[ 5077.966788] c3 usb usb1: bus auto-suspend
  793. <7>[ 5077.966827] c3 s5p-ehci s5p-ehci: suspend root hub
  794. <6>[ 5077.967888] c3 s5p-ehci s5p-ehci: host_phy_susp
  795. <6>[ 5077.967935] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  796. <6>[ 5078.985748] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  797. <6>[ 5078.985900] c0 s5p-ehci s5p-ehci: host_phy_resume
  798. <6>[ 5078.986042] c0 s5p_ehci_runtime_resume: usage=1, child=0
  799. <7>[ 5078.986120] c0 usb usb1: usb auto-resume
  800. <7>[ 5078.986175] c0 s5p-ehci s5p-ehci: resume root hub
  801. <7>[ 5079.011682] c0 hub 1-0:1.0: hub_resume
  802. <7>[ 5079.011739] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  803. <7>[ 5079.011821] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  804. <7>[ 5079.011864] c0 usb 1-2: usb auto-resume
  805. <6>[ 5079.013202] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  806. <7>[ 5079.046692] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  807. <6>[ 5079.061669] c0 mif: usb_port_resume: 1283, 4
  808. <7>[ 5079.061721] c0 usb 1-2: finish resume
  809. <4>[ 5079.158644] c0 lsm330dlc_gyro_work_func, use last data(-222, -747, 9), status=0, selftest=0
  810. <7>[ 5079.262404] c2 usb 1-2: usb auto-suspend
  811. <7>[ 5079.376749] c2 hub 1-0:1.0: hub_suspend
  812. <7>[ 5079.376845] c2 usb usb1: bus auto-suspend
  813. <7>[ 5079.376887] c2 s5p-ehci s5p-ehci: suspend root hub
  814. <6>[ 5079.377284] c2 s5p-ehci s5p-ehci: host_phy_susp
  815. <6>[ 5079.377357] c2 s5p_ehci_runtime_suspend: usage=0, child=0
  816. <4>[ 5080.128142] c3 lsm330dlc_gyro_work_func, use last data(292, -359, -128), status=0, selftest=0
  817. <6>[ 5080.584902] c0 lcd panel: brightness=219, bl=27, candela=210
  818. <6>[ 5081.019946] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  819. <6>[ 5081.020601] c0 s5p-ehci s5p-ehci: host_phy_resume
  820. <6>[ 5081.020729] c0 s5p_ehci_runtime_resume: usage=1, child=0
  821. <7>[ 5081.020780] c0 usb usb1: usb auto-resume
  822. <7>[ 5081.020809] c0 s5p-ehci s5p-ehci: resume root hub
  823. <7>[ 5081.046660] c1 hub 1-0:1.0: hub_resume
  824. <7>[ 5081.046711] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  825. <7>[ 5081.046776] c1 usb 1-2: usb auto-resume
  826. <7>[ 5081.046813] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  827. <6>[ 5081.048109] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  828. <7>[ 5081.081714] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  829. <6>[ 5081.096689] c1 mif: usb_port_resume: 1283, 4
  830. <7>[ 5081.096738] c1 usb 1-2: finish resume
  831. <7>[ 5081.322596] c1 usb 1-2: usb auto-suspend
  832. <7>[ 5081.437531] c1 hub 1-0:1.0: hub_suspend
  833. <7>[ 5081.437603] c1 usb usb1: bus auto-suspend
  834. <7>[ 5081.437654] c1 s5p-ehci s5p-ehci: suspend root hub
  835. <6>[ 5081.437886] c1 s5p-ehci s5p-ehci: host_phy_susp
  836. <6>[ 5081.437943] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  837. <7>[ 5081.937095] c3 i2s_txctrl: Turn Off - spr is no active
  838. <6>[ 5081.937919] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]
  839. <6>[ 5081.937989] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]
  840. <4>[ 5082.123036] c0 lsm330dlc_gyro_work_func, use last data(282, 137, 25), status=0, selftest=0
  841. <6>[ 5082.801665] c0 pet_watchdog_timer_fn kicking...be65
  842. <6>[ 5084.634872] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  843. <6>[ 5084.635007] c2 s5p-ehci s5p-ehci: host_phy_resume
  844. <6>[ 5084.635163] c2 s5p_ehci_runtime_resume: usage=1, child=0
  845. <7>[ 5084.635232] c2 usb usb1: usb auto-resume
  846. <7>[ 5084.635278] c2 s5p-ehci s5p-ehci: resume root hub
  847. <6>[ 5084.653761] c0 lcd panel: brightness=209, bl=26, candela=200
  848. <7>[ 5084.661720] c2 hub 1-0:1.0: hub_resume
  849. <7>[ 5084.661810] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  850. <7>[ 5084.661919] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  851. <7>[ 5084.661973] c2 usb 1-2: usb auto-resume
  852. <6>[ 5084.663182] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  853. <7>[ 5084.696727] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  854. <6>[ 5084.711916] c2 mif: usb_port_resume: 1283, 4
  855. <7>[ 5084.711998] c2 usb 1-2: finish resume
  856. <7>[ 5084.912694] c2 usb 1-2: usb auto-suspend
  857. <7>[ 5085.026682] c2 hub 1-0:1.0: hub_suspend
  858. <7>[ 5085.026730] c2 usb usb1: bus auto-suspend
  859. <7>[ 5085.026759] c2 s5p-ehci s5p-ehci: suspend root hub
  860. <6>[ 5085.027348] c2 s5p-ehci s5p-ehci: host_phy_susp
  861. <6>[ 5085.027379] c2 s5p_ehci_runtime_suspend: usage=0, child=0
  862. <4>[ 5085.133974] c0 lsm330dlc_gyro_work_func, use last data(70, 45, 63), status=0, selftest=0
  863. <6>[ 5086.047015] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  864. <6>[ 5086.047080] c0 s5p-ehci s5p-ehci: host_phy_resume
  865. <6>[ 5086.047195] c0 s5p_ehci_runtime_resume: usage=1, child=0
  866. <7>[ 5086.047234] c0 usb usb1: usb auto-resume
  867. <7>[ 5086.047261] c0 s5p-ehci s5p-ehci: resume root hub
  868. <7>[ 5086.076735] c0 hub 1-0:1.0: hub_resume
  869. <7>[ 5086.076838] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  870. <7>[ 5086.077034] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  871. <7>[ 5086.077127] c0 usb 1-2: usb auto-resume
  872. <6>[ 5086.078699] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  873. <7>[ 5086.111766] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  874. <6>[ 5086.126907] c0 mif: usb_port_resume: 1283, 4
  875. <7>[ 5086.126963] c0 usb 1-2: finish resume
  876. <7>[ 5086.328187] c3 usb 1-2: usb auto-suspend
  877. <7>[ 5086.441807] c3 hub 1-0:1.0: hub_suspend
  878. <7>[ 5086.441870] c3 usb usb1: bus auto-suspend
  879. <7>[ 5086.441911] c3 s5p-ehci s5p-ehci: suspend root hub
  880. <6>[ 5086.442325] c3 s5p-ehci s5p-ehci: host_phy_susp
  881. <6>[ 5086.442372] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  882. <6>[ 5087.459325] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  883. <6>[ 5087.459489] c0 s5p-ehci s5p-ehci: host_phy_resume
  884. <6>[ 5087.459620] c0 s5p_ehci_runtime_resume: usage=1, child=0
  885. <7>[ 5087.459677] c0 usb usb1: usb auto-resume
  886. <7>[ 5087.459969] c0 s5p-ehci s5p-ehci: resume root hub
  887. <7>[ 5087.486770] c1 hub 1-0:1.0: hub_resume
  888. <7>[ 5087.486881] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  889. <7>[ 5087.487039] c1 usb 1-2: usb auto-resume
  890. <7>[ 5087.487091] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  891. <6>[ 5087.488302] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  892. <7>[ 5087.521748] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  893. <6>[ 5087.536738] c1 mif: usb_port_resume: 1283, 4
  894. <7>[ 5087.536810] c1 usb 1-2: finish resume
  895. <7>[ 5087.737721] c1 usb 1-2: usb auto-suspend
  896. <6>[ 5087.801662] c0 pet_watchdog_timer_fn kicking...be65
  897. <7>[ 5087.851842] c1 hub 1-0:1.0: hub_suspend
  898. <7>[ 5087.851920] c1 usb usb1: bus auto-suspend
  899. <7>[ 5087.851970] c1 s5p-ehci s5p-ehci: suspend root hub
  900. <6>[ 5087.853160] c1 s5p-ehci s5p-ehci: host_phy_susp
  901. <6>[ 5087.853214] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  902. <6>[ 5092.801665] c0 pet_watchdog_timer_fn kicking...be66
  903. <4>[ 5093.109051] c0 lsm330dlc_gyro_work_func, use last data(-222, -47, 27), status=0, selftest=0
  904. <6>[ 5094.604143] c0 lcd panel: brightness=199, bl=25, candela=190
  905. <4>[ 5095.933634] c0 lsm330dlc_gyro_work_func, use last data(-7, 624, 105), status=0, selftest=0
  906. <6>[ 5097.801664] c0 pet_watchdog_timer_fn kicking...be66
  907. <6>[ 5099.889988] c2 max17047_get_soc: SOC(93, 9213 / 9821)
  908. <6>[ 5099.895292] c2 [323] bat: s(93, 11), v(4333, 104), t(52.2), cs(1, 1), cb(3), cr(999, 1000), t(2312)
  909. <4>[ 5099.904367] c1 healthd: max77693-charger: Unknown power supply type
  910. <4>[ 5099.907075] c1 healthd: battery [l=93 v=4333 t=52.2 h=2 st=2] c=0 dock-battery none chg=a
  911. <6>[ 5100.808110] c3 [BT] bt_lpm_exit_lpm_locked.
  912. <6>[ 5100.812567] c3 [BT] bt_lpm_exit_lpm_locked.
  913. <6>[ 5100.813449] c3 [BT] bt_lpm_exit_lpm_locked.
  914. <6>[ 5100.816278] c3 [BT] bt_lpm_exit_lpm_locked.
  915. <6>[ 5100.817346] c3 [BT] bt_lpm_exit_lpm_locked.
  916. <6>[ 5100.818418] c3 [BT] bt_lpm_exit_lpm_locked.
  917. <4>[ 5102.167508] c0 lsm330dlc_gyro_work_func, use last data(53, -132, -56), status=0, selftest=0
  918. <4>[ 5102.168239] c0 lsm330dlc_gyro_work_func, use last data(53, -132, -56), status=0, selftest=0
  919. <6>[ 5102.586758] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  920. <6>[ 5102.588457] c0 s5p-ehci s5p-ehci: host_phy_resume
  921. <6>[ 5102.588641] c0 s5p_ehci_runtime_resume: usage=1, child=0
  922. <7>[ 5102.588702] c0 usb usb1: usb auto-resume
  923. <7>[ 5102.588744] c0 s5p-ehci s5p-ehci: resume root hub
  924. <7>[ 5102.616722] c1 hub 1-0:1.0: hub_resume
  925. <7>[ 5102.616802] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  926. <7>[ 5102.616905] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  927. <7>[ 5102.616953] c1 usb 1-2: usb auto-resume
  928. <6>[ 5102.619241] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  929. <7>[ 5102.651787] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  930. <6>[ 5102.666687] c1 mif: usb_port_resume: 1283, 4
  931. <7>[ 5102.666754] c1 usb 1-2: finish resume
  932. <6>[ 5102.801669] c0 pet_watchdog_timer_fn kicking...be65
  933. <7>[ 5102.897730] c3 usb 1-2: usb auto-suspend
  934. <7>[ 5103.011662] c3 hub 1-0:1.0: hub_suspend
  935. <7>[ 5103.011701] c3 usb usb1: bus auto-suspend
  936. <7>[ 5103.011727] c3 s5p-ehci s5p-ehci: suspend root hub
  937. <6>[ 5103.011803] c3 s5p-ehci s5p-ehci: host_phy_susp
  938. <6>[ 5103.011833] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  939. <6>[ 5103.975870] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  940. <6>[ 5103.976067] c0 s5p-ehci s5p-ehci: host_phy_resume
  941. <6>[ 5103.976215] c0 s5p_ehci_runtime_resume: usage=1, child=0
  942. <7>[ 5103.976274] c0 usb usb1: usb auto-resume
  943. <7>[ 5103.976316] c0 s5p-ehci s5p-ehci: resume root hub
  944. <7>[ 5104.001760] c2 hub 1-0:1.0: hub_resume
  945. <7>[ 5104.001854] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  946. <7>[ 5104.001983] c2 usb 1-2: usb auto-resume
  947. <7>[ 5104.002094] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  948. <6>[ 5104.003323] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  949. <7>[ 5104.036809] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  950. <6>[ 5104.051729] c3 mif: usb_port_resume: 1283, 4
  951. <7>[ 5104.051806] c3 usb 1-2: finish resume
  952. <7>[ 5104.252693] c3 usb 1-2: usb auto-suspend
  953. <7>[ 5104.366693] c3 hub 1-0:1.0: hub_suspend
  954. <7>[ 5104.366754] c3 usb usb1: bus auto-suspend
  955. <7>[ 5104.366793] c3 s5p-ehci s5p-ehci: suspend root hub
  956. <6>[ 5104.367388] c3 s5p-ehci s5p-ehci: host_phy_susp
  957. <6>[ 5104.367436] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  958. <6>[ 5104.419670] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  959. <6>[ 5104.419791] c0 s5p-ehci s5p-ehci: host_phy_resume
  960. <6>[ 5104.419920] c0 s5p_ehci_runtime_resume: usage=1, child=0
  961. <7>[ 5104.419974] c0 usb usb1: usb auto-resume
  962. <7>[ 5104.420014] c0 s5p-ehci s5p-ehci: resume root hub
  963. <7>[ 5104.446719] c0 hub 1-0:1.0: hub_resume
  964. <7>[ 5104.446799] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  965. <7>[ 5104.446902] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  966. <7>[ 5104.446949] c0 usb 1-2: usb auto-resume
  967. <6>[ 5104.452764] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  968. <7>[ 5104.481724] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  969. <6>[ 5104.496698] c0 mif: usb_port_resume: 1283, 4
  970. <7>[ 5104.496765] c0 usb 1-2: finish resume
  971. <6>[ 5104.508673] c2 max77686_rtc_set_time: 115/6/12 14:11:28(0)
  972. <6>[ 5104.531685] c0 max77686_rtc_set_time: task=Binder_1[11133]
  973. <7>[ 5104.757824] c3 usb 1-2: usb auto-suspend
  974. <7>[ 5104.871720] c3 hub 1-0:1.0: hub_suspend
  975. <7>[ 5104.871786] c3 usb usb1: bus auto-suspend
  976. <7>[ 5104.871824] c3 s5p-ehci s5p-ehci: suspend root hub
  977. <6>[ 5104.872117] c3 s5p-ehci s5p-ehci: host_phy_susp
  978. <6>[ 5104.872164] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  979. <6>[ 5104.975937] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  980. <6>[ 5104.975996] c0 s5p-ehci s5p-ehci: host_phy_resume
  981. <6>[ 5104.976105] c0 s5p_ehci_runtime_resume: usage=1, child=0
  982. <7>[ 5104.976138] c0 usb usb1: usb auto-resume
  983. <7>[ 5104.976162] c0 s5p-ehci s5p-ehci: resume root hub
  984. <7>[ 5105.001975] c1 hub 1-0:1.0: hub_resume
  985. <7>[ 5105.002036] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  986. <7>[ 5105.002135] c1 usb 1-2: usb auto-resume
  987. <7>[ 5105.002245] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  988. <6>[ 5105.003499] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  989. <7>[ 5105.036700] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  990. <6>[ 5105.051658] c1 mif: usb_port_resume: 1283, 4
  991. <7>[ 5105.051725] c1 usb 1-2: finish resume
  992. <6>[ 5105.058062] c3 [BT] bt_lpm_exit_lpm_locked.
  993. <7>[ 5105.252323] c1 usb 1-2: usb auto-suspend
  994. <7>[ 5105.366792] c1 hub 1-0:1.0: hub_suspend
  995. <7>[ 5105.366877] c1 usb usb1: bus auto-suspend
  996. <7>[ 5105.366930] c1 s5p-ehci s5p-ehci: suspend root hub
  997. <6>[ 5105.367241] c1 s5p-ehci s5p-ehci: host_phy_susp
  998. <6>[ 5105.367303] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  999. <6>[ 5106.524491] c1 cm36651_work_func_light, red = 1380 green = 1638 blue = 1102 white = 2278
  1000. <6>[ 5107.573402] c0 lcd panel: brightness=189, bl=24, candela=188
  1001. <6>[ 5107.639912] c0 lcd panel: brightness=186, bl=23, candela=186
  1002. <6>[ 5107.801672] c0 pet_watchdog_timer_fn kicking...bf1f
  1003. <6>[ 5110.817747] c3 [BT] bt_lpm_exit_lpm_locked.
  1004. <6>[ 5110.823029] c3 [BT] bt_lpm_exit_lpm_locked.
  1005. <6>[ 5110.824297] c3 [BT] bt_lpm_exit_lpm_locked.
  1006. <6>[ 5112.225429] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1007. <6>[ 5112.225506] c0 s5p-ehci s5p-ehci: host_phy_resume
  1008. <6>[ 5112.225621] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1009. <7>[ 5112.225658] c0 usb usb1: usb auto-resume
  1010. <7>[ 5112.225685] c0 s5p-ehci s5p-ehci: resume root hub
  1011. <7>[ 5112.251884] c0 hub 1-0:1.0: hub_resume
  1012. <7>[ 5112.251953] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1013. <7>[ 5112.252043] c0 usb 1-2: usb auto-resume
  1014. <7>[ 5112.252079] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1015. <6>[ 5112.253416] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1016. <7>[ 5112.286669] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1017. <6>[ 5112.301791] c0 mif: usb_port_resume: 1283, 4
  1018. <7>[ 5112.301851] c0 usb 1-2: finish resume
  1019. <7>[ 5112.502315] c3 usb 1-2: usb auto-suspend
  1020. <6>[ 5112.557508] c0 lcd panel: brightness=185, bl=22, candela=184
  1021. <6>[ 5112.574253] c0 lcd panel: brightness=183, bl=21, candela=182
  1022. <7>[ 5112.616669] c3 hub 1-0:1.0: hub_suspend
  1023. <7>[ 5112.616709] c3 usb usb1: bus auto-suspend
  1024. <7>[ 5112.616735] c3 s5p-ehci s5p-ehci: suspend root hub
  1025. <6>[ 5112.617737] c3 s5p-ehci s5p-ehci: host_phy_susp
  1026. <6>[ 5112.617775] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1027. <6>[ 5112.801650] c0 pet_watchdog_timer_fn kicking...bf9d
  1028. <4>[ 5117.113013] c0 lsm330dlc_gyro_work_func, use last data(54, 33, -44), status=1, selftest=0
  1029. <6>[ 5117.358034] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1030. <6>[ 5117.358237] c0 s5p-ehci s5p-ehci: host_phy_resume
  1031. <6>[ 5117.358365] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1032. <7>[ 5117.358417] c0 usb usb1: usb auto-resume
  1033. <7>[ 5117.358481] c0 s5p-ehci s5p-ehci: resume root hub
  1034. <7>[ 5117.386724] c2 hub 1-0:1.0: hub_resume
  1035. <7>[ 5117.386813] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  1036. <7>[ 5117.386928] c2 usb 1-2: usb auto-resume
  1037. <7>[ 5117.386989] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1038. <6>[ 5117.388262] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1039. <7>[ 5117.421771] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1040. <6>[ 5117.436712] c2 mif: usb_port_resume: 1283, 4
  1041. <7>[ 5117.436814] c2 usb 1-2: finish resume
  1042. <6>[ 5117.445855] c3 [BT] bt_lpm_exit_lpm_locked.
  1043. <7>[ 5117.637559] c2 usb 1-2: usb auto-suspend
  1044. <7>[ 5117.751738] c2 hub 1-0:1.0: hub_suspend
  1045. <7>[ 5117.751824] c2 usb usb1: bus auto-suspend
  1046. <7>[ 5117.751877] c2 s5p-ehci s5p-ehci: suspend root hub
  1047. <6>[ 5117.752570] c2 s5p-ehci s5p-ehci: host_phy_susp
  1048. <6>[ 5117.752642] c2 s5p_ehci_runtime_suspend: usage=0, child=0
  1049. <6>[ 5117.801681] c0 pet_watchdog_timer_fn kicking...c15c
  1050. <4>[ 5118.133067] c0 lsm330dlc_gyro_work_func, use last data(72, -9, -18), status=0, selftest=0
  1051. <6>[ 5119.346745] c0 max77693_irq_thread: interrupt source(0x01)
  1052. <6>[ 5119.347378] c0 max77693_irq_thread: charger interrupt(0x40)
  1053. <6>[ 5119.347454] c0 max77693_charger_irq: irq(436)
  1054. <6>[ 5119.374062] c0 max77693_charger_irq: INT_OK(0x1d), THM(0x0), CHGIN(0x0), CHG(0x8), BAT(0x3), ST2(0x45)
  1055. <6>[ 5119.596070] c0 max77693_irq_thread: interrupt source(0x08)
  1056. <6>[ 5119.596996] c0 max77693_irq_thread: muic interrupt(0x00, 0x13, 0x00)
  1057. <6>[ 5119.597056] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
  1058. <6>[ 5119.598944] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  1059. <6>[ 5119.599716] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
  1060. <6>[ 5119.599779] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
  1061. <6>[ 5119.599850] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:3
  1062. <6>[ 5119.599912] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1063. <6>[ 5119.599966] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1064. <6>[ 5119.602257] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
  1065. <6>[ 5119.604038] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1066. <6>[ 5119.604727] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
  1067. <6>[ 5119.604786] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1068. <6>[ 5119.604844] c0 max77693_set_jig_state: 0
  1069. <6>[ 5119.604879] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: TA
  1070. <6>[ 5119.604933] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  1071. <6>[ 5119.605006] c0 max77693_muic_charger_cb: cable_type(0), prev_cable(3)
  1072. <6>[ 5119.605205] c0 max77693_set_jig_state: 0
  1073. <6>[ 5119.605249] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
  1074. <6>[ 5119.607102] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  1075. <6>[ 5119.608067] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
  1076. <6>[ 5119.608129] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
  1077. <6>[ 5119.608196] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:0
  1078. <6>[ 5119.608259] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1079. <6>[ 5119.608317] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1080. <6>[ 5119.610517] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
  1081. <6>[ 5119.612208] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1082. <6>[ 5119.613021] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
  1083. <6>[ 5119.613079] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1084. <6>[ 5119.613137] c0 max77693_set_jig_state: 0
  1085. <6>[ 5119.613173] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
  1086. <6>[ 5119.893010] c0 max17047_get_soc: SOC(93, 9224 / 9821)
  1087. <6>[ 5119.899228] c0 max77693_set_charger_state: reset recovery cnt
  1088. <6>[ 5119.900876] c0 battery_charge_control: charge disabled, current as 0/0mA @9653
  1089. <6>[ 5119.901568] c0 battery_interval_calulation: v diff(20000), weight(120)
  1090. <6>[ 5119.901980] c0 battery_interval_calulation: weight(120)
  1091. <6>[ 5119.902051] c0 battery_monitor_interval: apply weight(120), 120 -> 144
  1092. <6>[ 5119.902143] c0 [324] bat: s(93, 11), v(4210, -20), t(53.5), cs(2, 2), cb(1), cr(0, 0)
  1093. <6>[ 5119.902248] c0 battery_monitor_work: update wakelock(200)
  1094. <4>[ 5119.913918] c3 healthd: max77693-charger: Unknown power supply type
  1095. <4>[ 5119.917199] c3 healthd: battery [l=93 v=4210 t=53.5 h=2 st=3] c=0 dock-battery none chg=
  1096. <3>[ 5120.013802] c3 an30259a: 00000000: 00 02 00 00 02 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1097. <3>[ 5120.020563] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1098. <3>[ 5120.027548] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1099. <7>[ 5120.033635] c3 led_blink is called, Color:0x0 Brightness:40
  1100. <6>[ 5122.801656] c0 pet_watchdog_timer_fn kicking...c004
  1101. <6>[ 5125.069557] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1102. <6>[ 5125.069698] c0 s5p-ehci s5p-ehci: host_phy_resume
  1103. <6>[ 5125.069845] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1104. <7>[ 5125.069889] c0 usb usb1: usb auto-resume
  1105. <7>[ 5125.069918] c0 s5p-ehci s5p-ehci: resume root hub
  1106. <7>[ 5125.096682] c0 hub 1-0:1.0: hub_resume
  1107. <7>[ 5125.096767] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1108. <7>[ 5125.096834] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1109. <7>[ 5125.096865] c0 usb 1-2: usb auto-resume
  1110. <6>[ 5125.098243] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1111. <7>[ 5125.131747] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1112. <6>[ 5125.146675] c0 mif: usb_port_resume: 1283, 4
  1113. <7>[ 5125.146740] c0 usb 1-2: finish resume
  1114. <7>[ 5125.347558] c0 usb 1-2: usb auto-suspend
  1115. <7>[ 5125.461665] c0 hub 1-0:1.0: hub_suspend
  1116. <7>[ 5125.461700] c0 usb usb1: bus auto-suspend
  1117. <7>[ 5125.461724] c0 s5p-ehci s5p-ehci: suspend root hub
  1118. <6>[ 5125.461963] c0 s5p-ehci s5p-ehci: host_phy_susp
  1119. <6>[ 5125.461990] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  1120. <4>[ 5126.109009] c0 lsm330dlc_gyro_work_func, use last data(57, 20, -23), status=0, selftest=0
  1121. <6>[ 5127.801750] c0 pet_watchdog_timer_fn kicking...beb4
  1122. <4>[ 5128.903581] c1 lsm330dlc_gyro_work_func, use last data(50, 14, -47), status=0, selftest=0
  1123. <6>[ 5129.182742] c0 max77693_irq_thread: interrupt source(0x01)
  1124. <6>[ 5129.183271] c0 max77693_irq_thread: charger interrupt(0x40)
  1125. <6>[ 5129.183305] c0 max77693_charger_irq: irq(436)
  1126. <6>[ 5129.208808] c0 max77693_charger_irq: INT_OK(0x5d), THM(0x0), CHGIN(0x3), CHG(0x8), BAT(0x3), ST2(0x48)
  1127. <6>[ 5129.209404] c0 max77693_irq_thread: interrupt source(0x08)
  1128. <6>[ 5129.210197] c0 max77693_irq_thread: muic interrupt(0x00, 0x12, 0x00)
  1129. <6>[ 5129.210242] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
  1130. <6>[ 5129.211902] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x3f, 2:0x3b, 3:0x20]
  1131. <6>[ 5129.212597] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
  1132. <6>[ 5129.212644] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x48
  1133. <6>[ 5129.212698] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:40 dxovp:0 cable_type:0
  1134. <6>[ 5129.212747] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1135. <6>[ 5129.212787] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1136. <6>[ 5129.214646] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
  1137. <6>[ 5129.216113] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1138. <6>[ 5129.216699] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
  1139. <6>[ 5129.216741] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1140. <6>[ 5129.216786] c0 max77693_set_jig_state: 0
  1141. <6>[ 5129.216813] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
  1142. <6>[ 5129.307117] c0 max77693_irq_thread: interrupt source(0x08)
  1143. <6>[ 5129.308139] c0 max77693_irq_thread: muic interrupt(0x00, 0x03, 0x00)
  1144. <6>[ 5129.308200] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
  1145. <6>[ 5129.310006] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  1146. <6>[ 5129.310804] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
  1147. <6>[ 5129.310866] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x45
  1148. <6>[ 5129.310936] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:5 vb:40 dxovp:0 cable_type:0
  1149. <6>[ 5129.311001] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED
  1150. <6>[ 5129.311056] c0 max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:45 cable_type:0
  1151. <6>[ 5129.311123] c0 max77693-muic max77693-muic: max77693_muic_handle_attach:TA
  1152. <6>[ 5129.311175] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  1153. <6>[ 5129.311249] c0 max77693_muic_charger_cb: cable_type(3), prev_cable(0)
  1154. <4>[ 5129.713081] c0 lsm330dlc_gyro_work_func, use last data(58, 15, -34), status=0, selftest=0
  1155. <6>[ 5129.721037] c0 max17047_get_soc: SOC(93, 9224 / 9821)
  1156. <6>[ 5130.000210] c3 [BT] bt_lpm_exit_lpm_locked.
  1157. <6>[ 5130.060581] c0 battery_charge_control: charge enabled, current as 999/1000mA @9663
  1158. <6>[ 5130.061300] c0 battery_interval_calulation: v diff(34375), weight(120)
  1159. <6>[ 5130.061358] c0 battery_interval_calulation: temper delta(22), weight(100)
  1160. <6>[ 5130.061431] c0 [325] bat: s(93, 0), v(4195, -34), t(51.3), cs(1, 1), cb(3), cr(999, 1000), t(0)
  1161. <6>[ 5130.061519] c0 battery_monitor_work: update wakelock(200)
  1162. <4>[ 5130.071287] c0 healthd: max77693-charger: Unknown power supply type
  1163. <4>[ 5130.074328] c0 healthd: battery [l=93 v=4195 t=51.3 h=2 st=2] c=0 dock-battery none chg=a
  1164. <3>[ 5130.111173] c2 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1165. <3>[ 5130.121763] c2 an30259a: 00000000: 00 02 00 00 0d 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1166. <3>[ 5130.131768] c2 an30259a: 00000000: 00 02 00 00 0d 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1167. <7>[ 5130.146001] c2 led_blink is called, Color:0xD00 Brightness:40
  1168. <6>[ 5130.174275] c3 [BT] bt_lpm_exit_lpm_locked.
  1169. <6>[ 5130.192291] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1170. <6>[ 5130.192465] c0 s5p-ehci s5p-ehci: host_phy_resume
  1171. <6>[ 5130.192587] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1172. <7>[ 5130.192636] c0 usb usb1: usb auto-resume
  1173. <7>[ 5130.192677] c0 s5p-ehci s5p-ehci: resume root hub
  1174. <6>[ 5130.196873] c3 [BT] bt_lpm_exit_lpm_locked.
  1175. <6>[ 5130.209949] c3 [BT] bt_lpm_exit_lpm_locked.
  1176. <6>[ 5130.212028] c3 [BT] bt_lpm_exit_lpm_locked.
  1177. <6>[ 5130.212453] c3 [BT] bt_lpm_exit_lpm_locked.
  1178. <6>[ 5130.212633] c3 [BT] bt_lpm_exit_lpm_locked.
  1179. <6>[ 5130.215373] c3 [BT] bt_lpm_exit_lpm_locked.
  1180. <6>[ 5130.221379] c3 [BT] bt_lpm_exit_lpm_locked.
  1181. <6>[ 5130.221457] c3 [BT] bt_lpm_exit_lpm_locked.
  1182. <7>[ 5130.221708] c0 hub 1-0:1.0: hub_resume
  1183. <7>[ 5130.221762] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1184. <7>[ 5130.221829] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1185. <7>[ 5130.221863] c0 usb 1-2: usb auto-resume
  1186. <6>[ 5130.223097] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1187. <6>[ 5130.224976] c3 [BT] bt_lpm_exit_lpm_locked.
  1188. <6>[ 5130.225604] c3 [BT] bt_lpm_exit_lpm_locked.
  1189. <6>[ 5130.230197] c3 [BT] bt_lpm_exit_lpm_locked.
  1190. <6>[ 5130.230260] c3 [BT] bt_lpm_exit_lpm_locked.
  1191. <6>[ 5130.232710] c3 [BT] bt_lpm_exit_lpm_locked.
  1192. <6>[ 5130.233188] c3 [BT] bt_lpm_exit_lpm_locked.
  1193. <6>[ 5130.233719] c3 [BT] bt_lpm_exit_lpm_locked.
  1194. <6>[ 5130.236039] c3 [BT] bt_lpm_exit_lpm_locked.
  1195. <7>[ 5130.256709] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1196. <6>[ 5130.271682] c3 mif: usb_port_resume: 1283, 4
  1197. <7>[ 5130.271741] c3 usb 1-2: finish resume
  1198. <6>[ 5130.277730] c3 [BT] bt_lpm_exit_lpm_locked.
  1199. <6>[ 5130.284209] c3 [BT] bt_lpm_exit_lpm_locked.
  1200. <6>[ 5130.284260] c3 [BT] bt_lpm_exit_lpm_locked.
  1201. <6>[ 5130.290085] c3 [BT] bt_lpm_exit_lpm_locked.
  1202. <6>[ 5130.294993] c3 [BT] bt_lpm_exit_lpm_locked.
  1203. <6>[ 5130.332154] c3 [BT] bt_lpm_exit_lpm_locked.
  1204. <6>[ 5130.337885] c3 [BT] bt_lpm_exit_lpm_locked.
  1205. <6>[ 5130.347986] c3 [BT] bt_lpm_exit_lpm_locked.
  1206. <6>[ 5130.377220] c1 [BT] bt_lpm_exit_lpm_locked.
  1207. <6>[ 5130.377281] c1 [BT] bt_lpm_exit_lpm_locked.
  1208. <6>[ 5130.377346] c1 [BT] bt_lpm_exit_lpm_locked.
  1209. <6>[ 5130.377405] c1 [BT] bt_lpm_exit_lpm_locked.
  1210. <6>[ 5130.388190] c1 [BT] bt_lpm_exit_lpm_locked.
  1211. <6>[ 5130.401384] c1 [BT] bt_lpm_exit_lpm_locked.
  1212. <6>[ 5130.437987] c1 [BT] bt_lpm_exit_lpm_locked.
  1213. <6>[ 5130.443847] c1 [BT] bt_lpm_exit_lpm_locked.
  1214. <6>[ 5130.449149] c1 [BT] bt_lpm_exit_lpm_locked.
  1215. <6>[ 5130.456389] c1 [BT] bt_lpm_exit_lpm_locked.
  1216. <6>[ 5130.464272] c1 [BT] bt_lpm_exit_lpm_locked.
  1217. <7>[ 5130.472564] c3 usb 1-2: usb auto-suspend
  1218. <7>[ 5130.586679] c3 hub 1-0:1.0: hub_suspend
  1219. <7>[ 5130.586717] c3 usb usb1: bus auto-suspend
  1220. <7>[ 5130.586740] c3 s5p-ehci s5p-ehci: suspend root hub
  1221. <6>[ 5130.587734] c3 s5p-ehci s5p-ehci: host_phy_susp
  1222. <6>[ 5130.587763] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1223. <6>[ 5130.821079] c1 [BT] bt_lpm_exit_lpm_locked.
  1224. <6>[ 5130.868669] c1 [BT] bt_lpm_exit_lpm_locked.
  1225. <6>[ 5130.868749] c1 [BT] bt_lpm_exit_lpm_locked.
  1226. <6>[ 5130.876340] c1 [BT] bt_lpm_exit_lpm_locked.
  1227. <6>[ 5130.877607] c1 [BT] bt_lpm_exit_lpm_locked.
  1228. <6>[ 5130.878832] c1 [BT] bt_lpm_exit_lpm_locked.
  1229. <6>[ 5130.881763] c1 [BT] bt_lpm_exit_lpm_locked.
  1230. <6>[ 5130.887180] c1 [BT] bt_lpm_exit_lpm_locked.
  1231. <6>[ 5130.892531] c1 [BT] bt_lpm_exit_lpm_locked.
  1232. <6>[ 5130.892804] c1 [BT] bt_lpm_exit_lpm_locked.
  1233. <6>[ 5130.899297] c1 [BT] bt_lpm_exit_lpm_locked.
  1234. <6>[ 5130.900249] c1 [BT] bt_lpm_exit_lpm_locked.
  1235. <6>[ 5130.905205] c1 [BT] bt_lpm_exit_lpm_locked.
  1236. <6>[ 5130.906434] c1 [BT] bt_lpm_exit_lpm_locked.
  1237. <6>[ 5130.909083] c1 [BT] bt_lpm_exit_lpm_locked.
  1238. <6>[ 5130.911500] c1 [BT] bt_lpm_exit_lpm_locked.
  1239. <6>[ 5130.916567] c1 [BT] bt_lpm_exit_lpm_locked.
  1240. <6>[ 5130.978119] c1 [BT] bt_lpm_exit_lpm_locked.
  1241. <6>[ 5130.980068] c1 [BT] bt_lpm_exit_lpm_locked.
  1242. <6>[ 5130.987718] c1 [BT] bt_lpm_exit_lpm_locked.
  1243. <4>[ 5131.083751] c0 lsm330dlc_gyro_work_func, use last data(63, 11, -52), status=0, selftest=0
  1244. <6>[ 5132.802079] c0 pet_watchdog_timer_fn kicking...bf13
  1245. <4>[ 5133.858739] c1 Mali: mem_usage before 27115 : 105381888
  1246. <6>[ 5135.310811] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1247. <6>[ 5135.310912] c0 s5p-ehci s5p-ehci: host_phy_resume
  1248. <6>[ 5135.311041] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1249. <7>[ 5135.311095] c0 usb usb1: usb auto-resume
  1250. <7>[ 5135.311134] c0 s5p-ehci s5p-ehci: resume root hub
  1251. <7>[ 5135.336727] c2 hub 1-0:1.0: hub_resume
  1252. <7>[ 5135.336817] c2 hub 1-0:1.0: port 2: status 0507 change 0000
  1253. <7>[ 5135.336946] c2 usb 1-2: usb auto-resume
  1254. <7>[ 5135.337026] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1255. <6>[ 5135.338591] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1256. <7>[ 5135.371750] c2 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1257. <6>[ 5135.386711] c1 mif: usb_port_resume: 1283, 4
  1258. <7>[ 5135.386783] c1 usb 1-2: finish resume
  1259. <7>[ 5135.588135] c3 usb 1-2: usb auto-suspend
  1260. <7>[ 5135.701744] c3 hub 1-0:1.0: hub_suspend
  1261. <7>[ 5135.701820] c3 usb usb1: bus auto-suspend
  1262. <7>[ 5135.701869] c3 s5p-ehci s5p-ehci: suspend root hub
  1263. <6>[ 5135.702213] c3 s5p-ehci s5p-ehci: host_phy_susp
  1264. <6>[ 5135.702271] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1265. <4>[ 5136.343573] c3 lsm330dlc_gyro_work_func, use last data(109, 24, -43), status=0, selftest=0
  1266. <6>[ 5137.525037] c1 cm36651_work_func_light, red = 980 green = 1166 blue = 760 white = 1499
  1267. <6>[ 5137.801651] c0 pet_watchdog_timer_fn kicking...c018
  1268. <6>[ 5137.984021] c1 [BT] bt_lpm_exit_lpm_locked.
  1269. <4>[ 5138.133389] c2 lsm330dlc_gyro_work_func, use last data(51, 0, -37), status=0, selftest=0
  1270. <6>[ 5138.892142] c0 max77693_irq_thread: interrupt source(0x01)
  1271. <6>[ 5138.892924] c0 max77693_irq_thread: charger interrupt(0x40)
  1272. <6>[ 5138.892978] c0 max77693_charger_irq: irq(436)
  1273. <6>[ 5138.919161] c0 max77693_charger_irq: INT_OK(0x1d), THM(0x0), CHGIN(0x0), CHG(0x8), BAT(0x3), ST2(0x45)
  1274. <6>[ 5139.140669] c0 max77693_irq_thread: interrupt source(0x08)
  1275. <6>[ 5139.141452] c0 max77693_irq_thread: muic interrupt(0x00, 0x13, 0x00)
  1276. <6>[ 5139.141514] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:441
  1277. <6>[ 5139.143221] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  1278. <6>[ 5139.143905] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:441 ret:0
  1279. <6>[ 5139.143963] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
  1280. <6>[ 5139.144031] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:3
  1281. <6>[ 5139.144090] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1282. <6>[ 5139.144146] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1283. <6>[ 5139.146077] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
  1284. <6>[ 5139.147617] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1285. <6>[ 5139.148238] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
  1286. <6>[ 5139.148293] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1287. <6>[ 5139.148356] c0 max77693_set_jig_state: 0
  1288. <6>[ 5139.148392] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: TA
  1289. <6>[ 5139.148442] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0
  1290. <6>[ 5139.148513] c0 max77693_muic_charger_cb: cable_type(0), prev_cable(3)
  1291. <6>[ 5139.148697] c0 max77693_set_jig_state: 0
  1292. <6>[ 5139.148735] c0 max77693-muic max77693-muic: max77693_muic_irq: irq:445
  1293. <6>[ 5139.150323] c0 max77693-muic:max77693_muic_detect_dev CONTROL[1:0x00, 2:0x3b, 3:0x20]
  1294. <6>[ 5139.150991] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:445 ret:0
  1295. <6>[ 5139.151042] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x0
  1296. <6>[ 5139.151098] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:0 vb:0 dxovp:0 cable_type:0
  1297. <6>[ 5139.151154] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: DETACHED
  1298. <6>[ 5139.151200] c0 max77693-muic max77693-muic: func:max77693_muic_handle_detach
  1299. <6>[ 5139.153067] c0 max77693-muic:max77693_muic_enable_accdet CTRL2:0x3b
  1300. <6>[ 5139.154525] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: CNTL2(0x3b)
  1301. <6>[ 5139.155085] c0 max77693-muic:max77693_muic_clear_cddelay read CDETCTRL1=0x2d, ret=0
  1302. <6>[ 5139.155131] c0 max77693-muic:max77693_muic_clear_cddelay CDDelay already cleared, return
  1303. <6>[ 5139.155183] c0 max77693_set_jig_state: 0
  1304. <6>[ 5139.155215] c0 max77693-muic max77693-muic: max77693_muic_handle_detach: duplicated(NONE)
  1305. <4>[ 5139.158082] c0 lsm330dlc_gyro_work_func, use last data(86, 3, -48), status=0, selftest=0
  1306. <6>[ 5139.430603] c0 max17047_get_soc: SOC(93, 9224 / 9821)
  1307. <6>[ 5139.437296] c0 max77693_set_charger_state: reset recovery cnt
  1308. <6>[ 5139.438066] c0 battery_charge_control: charge disabled, current as 0/0mA @9673
  1309. <6>[ 5139.438751] c0 [326] bat: s(93, 0), v(4169, -60), t(51.8), cs(2, 2), cb(1), cr(0, 0)
  1310. <6>[ 5139.438829] c0 battery_monitor_work: update wakelock(200)
  1311. <4>[ 5139.447557] c2 healthd: max77693-charger: Unknown power supply type
  1312. <4>[ 5139.449582] c2 healthd: battery [l=93 v=4169 t=51.8 h=2 st=3] c=0 dock-battery none chg=
  1313. <3>[ 5139.512867] c0 an30259a: 00000000: 00 02 00 00 02 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1314. <3>[ 5139.534603] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1315. <3>[ 5139.546255] c3 an30259a: 00000000: 00 00 00 00 00 00 f2 f2 f2 ff 00 00 00 ff 00 00 00 ff 00 00 00
  1316. <7>[ 5139.555111] c3 led_blink is called, Color:0x0 Brightness:40
  1317. <4>[ 5140.064468] c0 lsm330dlc_gyro_work_func, use last data(45, 19, -43), status=0, selftest=0
  1318. <4>[ 5140.118151] c0 lsm330dlc_gyro_work_func, use last data(57, 20, -50), status=0, selftest=0
  1319. <4>[ 5140.253206] c3 lsm330dlc_gyro_work_func, use last data(59, 17, -27), status=0, selftest=0
  1320. <6>[ 5140.958701] c3 [BT] bt_lpm_exit_lpm_locked.
  1321. <6>[ 5140.960005] c3 [BT] bt_lpm_exit_lpm_locked.
  1322. <6>[ 5140.961034] c3 [BT] bt_lpm_exit_lpm_locked.
  1323. <6>[ 5140.965359] c3 [BT] bt_lpm_exit_lpm_locked.
  1324. <6>[ 5140.966173] c3 [BT] bt_lpm_exit_lpm_locked.
  1325. <6>[ 5140.967465] c3 [BT] bt_lpm_exit_lpm_locked.
  1326. <6>[ 5142.801669] c0 pet_watchdog_timer_fn kicking...bf2a
  1327. <6>[ 5145.580443] c0 lcd panel: brightness=181, bl=20, candela=180
  1328. <4>[ 5146.123895] c2 lsm330dlc_gyro_work_func, use last data(84, 2, -61), status=0, selftest=0
  1329. <4>[ 5146.308478] c0 lsm330dlc_gyro_work_func, use last data(69, 20, 9), status=0, selftest=0
  1330. <6>[ 5147.801659] c0 pet_watchdog_timer_fn kicking...c1c5
  1331. <4>[ 5148.108201] c2 lsm330dlc_gyro_work_func, use last data(235, -26, -3), status=0, selftest=0
  1332. <6>[ 5150.968881] c3 [BT] bt_lpm_exit_lpm_locked.
  1333. <6>[ 5150.973597] c3 [BT] bt_lpm_exit_lpm_locked.
  1334. <6>[ 5150.974364] c3 [BT] bt_lpm_exit_lpm_locked.
  1335. <6>[ 5152.801660] c0 pet_watchdog_timer_fn kicking...c23f
  1336. <6>[ 5154.252431] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=520
  1337. <4>[ 5155.138757] c0 lsm330dlc_gyro_work_func, use last data(730, -539, 61), status=0, selftest=0
  1338. <6>[ 5155.752225] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1339. <6>[ 5155.752353] c0 s5p-ehci s5p-ehci: host_phy_resume
  1340. <6>[ 5155.752677] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1341. <7>[ 5155.752758] c0 usb usb1: usb auto-resume
  1342. <7>[ 5155.752825] c0 s5p-ehci s5p-ehci: resume root hub
  1343. <7>[ 5155.781705] c0 hub 1-0:1.0: hub_resume
  1344. <7>[ 5155.781793] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1345. <7>[ 5155.781907] c2 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1346. <7>[ 5155.781962] c0 usb 1-2: usb auto-resume
  1347. <6>[ 5155.783215] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1348. <7>[ 5155.816755] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1349. <6>[ 5155.831688] c0 mif: usb_port_resume: 1283, 4
  1350. <7>[ 5155.831757] c0 usb 1-2: finish resume
  1351. <7>[ 5156.032409] c3 usb 1-2: usb auto-suspend
  1352. <7>[ 5156.146775] c3 hub 1-0:1.0: hub_suspend
  1353. <7>[ 5156.146819] c3 usb usb1: bus auto-suspend
  1354. <7>[ 5156.146845] c3 s5p-ehci s5p-ehci: suspend root hub
  1355. <6>[ 5156.147897] c3 s5p-ehci s5p-ehci: host_phy_susp
  1356. <6>[ 5156.147935] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1357. <4>[ 5156.528169] c0 lsm330dlc_gyro_work_func, use last data(-2338, -7177, -3114), status=0, selftest=0
  1358. <4>[ 5157.093194] c0 lsm330dlc_gyro_work_func, use last data(-374, -1148, -948), status=0, selftest=0
  1359. <6>[ 5157.801678] c0 pet_watchdog_timer_fn kicking...c1c5
  1360. <4>[ 5160.088727] c0 lsm330dlc_gyro_work_func, use last data(124, -73, -88), status=0, selftest=0
  1361. <6>[ 5160.583274] c0 lcd panel: brightness=179, bl=19, candela=170
  1362. <4>[ 5161.108609] c0 lsm330dlc_gyro_work_func, use last data(374, -164, -86), status=0, selftest=0
  1363. <7>[ 5161.230963] c0 [TouchKey] keycode:158 pressed:1
  1364. <7>[ 5161.352491] c0 [TouchKey] keycode:158 pressed:0
  1365. <7>[ 5162.640267] c0 [TouchKey] keycode:158 pressed:1
  1366. <7>[ 5162.747088] c0 [TouchKey] keycode:158 pressed:0
  1367. <6>[ 5162.801670] c0 pet_watchdog_timer_fn kicking...bed1
  1368. <6>[ 5162.944735] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1369. <6>[ 5162.944817] c0 s5p-ehci s5p-ehci: host_phy_resume
  1370. <6>[ 5162.944931] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1371. <7>[ 5162.944970] c0 usb usb1: usb auto-resume
  1372. <7>[ 5162.945000] c0 s5p-ehci s5p-ehci: resume root hub
  1373. <7>[ 5162.971686] c0 hub 1-0:1.0: hub_resume
  1374. <7>[ 5162.971766] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1375. <7>[ 5162.971864] c0 usb 1-2: usb auto-resume
  1376. <7>[ 5162.972530] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1377. <6>[ 5162.973294] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1378. <7>[ 5163.007084] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1379. <6>[ 5163.021664] c2 mif: usb_port_resume: 1283, 4
  1380. <7>[ 5163.021713] c2 usb 1-2: finish resume
  1381. <7>[ 5163.222527] c3 usb 1-2: usb auto-suspend
  1382. <7>[ 5163.336710] c3 hub 1-0:1.0: hub_suspend
  1383. <7>[ 5163.336775] c3 usb usb1: bus auto-suspend
  1384. <7>[ 5163.336808] c3 s5p-ehci s5p-ehci: suspend root hub
  1385. <6>[ 5163.337062] c3 s5p-ehci s5p-ehci: host_phy_susp
  1386. <6>[ 5163.337101] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1387. <7>[ 5163.901675] c0 [TouchKey] keycode:158 pressed:1
  1388. <7>[ 5164.026550] c0 [TouchKey] keycode:158 pressed:0
  1389. <6>[ 5164.743944] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1390. <6>[ 5164.744044] c0 s5p-ehci s5p-ehci: host_phy_resume
  1391. <6>[ 5164.744173] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1392. <7>[ 5164.744226] c0 usb usb1: usb auto-resume
  1393. <7>[ 5164.744266] c0 s5p-ehci s5p-ehci: resume root hub
  1394. <7>[ 5164.746121] c0 [TouchKey] keycode:158 pressed:1
  1395. <7>[ 5164.771711] c0 hub 1-0:1.0: hub_resume
  1396. <7>[ 5164.771792] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1397. <7>[ 5164.771897] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1398. <7>[ 5164.771945] c0 usb 1-2: usb auto-resume
  1399. <6>[ 5164.772873] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1400. <7>[ 5164.806756] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1401. <6>[ 5164.821691] c0 mif: usb_port_resume: 1283, 4
  1402. <7>[ 5164.821753] c0 usb 1-2: finish resume
  1403. <7>[ 5164.852970] c0 [TouchKey] keycode:158 pressed:0
  1404. <6>[ 5164.911009] c0 binder: 11117:11809 transaction failed 29189, size 320-0
  1405. <6>[ 5165.040368] c3 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
  1406. <6>[ 5165.040771] c0 lsm330dlc_gyro_set_delay_ns, delay_ns=50000000, odr_value=0x11
  1407. <6>[ 5165.042226] c0 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
  1408. <6>[ 5165.094989] c2 max77686_rtc_set_time: 115/6/12 14:12:28(0)
  1409. <6>[ 5165.121977] c0 max77686_rtc_set_time: task=Binder_B[11807]
  1410. <7>[ 5165.182965] c3 usb 1-2: usb auto-suspend
  1411. <7>[ 5165.296669] c3 hub 1-0:1.0: hub_suspend
  1412. <7>[ 5165.296708] c3 usb usb1: bus auto-suspend
  1413. <7>[ 5165.296734] c3 s5p-ehci s5p-ehci: suspend root hub
  1414. <6>[ 5165.297330] c3 s5p-ehci s5p-ehci: host_phy_susp
  1415. <6>[ 5165.297363] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1416. <3>[ 5165.967701] c3 init: untracked pid 27303 killed by signal 9
  1417. <7>[ 5166.192204] c0 [TouchKey] keycode:158 pressed:1
  1418. <7>[ 5166.294990] c0 [TouchKey] keycode:158 pressed:0
  1419. <7>[ 5166.377684] c0 [TouchKey] keycode:158 pressed:1
  1420. <7>[ 5166.473112] c0 [TouchKey] keycode:158 pressed:0
  1421. <7>[ 5166.903312] c0 [TouchKey] keycode:158 pressed:1
  1422. <7>[ 5167.009796] c0 [TouchKey] keycode:158 pressed:0
  1423. <6>[ 5167.020124] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1424. <6>[ 5167.020196] c0 s5p-ehci s5p-ehci: host_phy_resume
  1425. <6>[ 5167.020324] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1426. <7>[ 5167.020361] c0 usb usb1: usb auto-resume
  1427. <7>[ 5167.020387] c0 s5p-ehci s5p-ehci: resume root hub
  1428. <7>[ 5167.046814] c0 hub 1-0:1.0: hub_resume
  1429. <7>[ 5167.046875] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1430. <7>[ 5167.046953] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1431. <7>[ 5167.046985] c0 usb 1-2: usb auto-resume
  1432. <6>[ 5167.048130] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1433. <7>[ 5167.081671] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1434. <6>[ 5167.096692] c0 mif: usb_port_resume: 1283, 4
  1435. <7>[ 5167.096738] c0 usb 1-2: finish resume
  1436. <7>[ 5167.100022] c0 [TouchKey] keycode:158 pressed:1
  1437. <7>[ 5167.183814] c0 [TouchKey] keycode:158 pressed:0
  1438. <7>[ 5167.241495] c0 [TouchKey] keycode:158 pressed:1
  1439. <7>[ 5167.298383] c3 usb 1-2: usb auto-suspend
  1440. <7>[ 5167.355494] c0 [TouchKey] keycode:158 pressed:0
  1441. <7>[ 5167.411692] c3 hub 1-0:1.0: hub_suspend
  1442. <7>[ 5167.411735] c3 usb usb1: bus auto-suspend
  1443. <7>[ 5167.411760] c3 s5p-ehci s5p-ehci: suspend root hub
  1444. <6>[ 5167.412432] c3 s5p-ehci s5p-ehci: host_phy_susp
  1445. <6>[ 5167.412460] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1446. <7>[ 5167.644930] c0 [TouchKey] keycode:158 pressed:1
  1447. <7>[ 5167.758428] c0 [TouchKey] keycode:158 pressed:0
  1448. <6>[ 5167.801648] c0 pet_watchdog_timer_fn kicking...be66
  1449. <7>[ 5167.826267] c0 [TouchKey] keycode:158 pressed:1
  1450. <7>[ 5167.936011] c0 [TouchKey] keycode:158 pressed:0
  1451. <7>[ 5168.348617] c0 [TouchKey] keycode:158 pressed:1
  1452. <7>[ 5168.444311] c0 [TouchKey] keycode:158 pressed:0
  1453. <7>[ 5168.512217] c0 [TouchKey] keycode:158 pressed:1
  1454. <6>[ 5168.524677] c2 cm36651_work_func_light, red = 970 green = 814 blue = 695 white = 1492
  1455. <7>[ 5168.617839] c0 [TouchKey] keycode:158 pressed:0
  1456. <6>[ 5169.409642] c2 binder: undelivered transaction 5708848
  1457. <6>[ 5169.691347] c0 lsm330dlc_accel_set_delay: old=25000000ns,new=25000000ns,odr=0x40,opened=1
  1458. <6>[ 5169.955105] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1459. <6>[ 5169.955203] c0 s5p-ehci s5p-ehci: host_phy_resume
  1460. <6>[ 5169.955320] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1461. <7>[ 5169.955380] c0 usb usb1: usb auto-resume
  1462. <7>[ 5169.955408] c0 s5p-ehci s5p-ehci: resume root hub
  1463. <7>[ 5169.981724] c0 hub 1-0:1.0: hub_resume
  1464. <7>[ 5169.981774] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1465. <7>[ 5169.981838] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1466. <7>[ 5169.981869] c0 usb 1-2: usb auto-resume
  1467. <6>[ 5169.983136] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1468. <7>[ 5170.016711] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1469. <6>[ 5170.031662] c0 mif: usb_port_resume: 1283, 4
  1470. <7>[ 5170.031707] c0 usb 1-2: finish resume
  1471. <7>[ 5170.233023] c0 usb 1-2: usb auto-suspend
  1472. <7>[ 5170.346684] c0 hub 1-0:1.0: hub_suspend
  1473. <7>[ 5170.346728] c0 usb usb1: bus auto-suspend
  1474. <7>[ 5170.346754] c0 s5p-ehci s5p-ehci: suspend root hub
  1475. <6>[ 5170.347466] c0 s5p-ehci s5p-ehci: host_phy_susp
  1476. <6>[ 5170.347496] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  1477. <6>[ 5170.974759] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1478. <6>[ 5170.974889] c0 s5p-ehci s5p-ehci: host_phy_resume
  1479. <6>[ 5170.975036] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1480. <7>[ 5170.975142] c0 usb usb1: usb auto-resume
  1481. <7>[ 5170.975189] c0 s5p-ehci s5p-ehci: resume root hub
  1482. <7>[ 5171.001854] c0 hub 1-0:1.0: hub_resume
  1483. <7>[ 5171.002054] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1484. <7>[ 5171.002238] c0 usb 1-2: usb auto-resume
  1485. <7>[ 5171.002458] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1486. <6>[ 5171.003537] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1487. <7>[ 5171.036869] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1488. <6>[ 5171.051776] c0 mif: usb_port_resume: 1283, 4
  1489. <7>[ 5171.051839] c0 usb 1-2: finish resume
  1490. <7>[ 5171.255849] c3 usb 1-2: usb auto-suspend
  1491. <7>[ 5171.366673] c3 hub 1-0:1.0: hub_suspend
  1492. <7>[ 5171.366721] c3 usb usb1: bus auto-suspend
  1493. <7>[ 5171.366750] c3 s5p-ehci s5p-ehci: suspend root hub
  1494. <6>[ 5171.367270] c3 s5p-ehci s5p-ehci: host_phy_susp
  1495. <6>[ 5171.367313] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1496. <6>[ 5172.801796] c0 pet_watchdog_timer_fn kicking...c012
  1497. <6>[ 5174.076189] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1498. <6>[ 5174.076269] c0 s5p-ehci s5p-ehci: host_phy_resume
  1499. <6>[ 5174.076385] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1500. <7>[ 5174.076428] c0 usb usb1: usb auto-resume
  1501. <7>[ 5174.076458] c0 s5p-ehci s5p-ehci: resume root hub
  1502. <7>[ 5174.101702] c0 hub 1-0:1.0: hub_resume
  1503. <7>[ 5174.101766] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1504. <7>[ 5174.101845] c0 usb 1-2: usb auto-resume
  1505. <7>[ 5174.101881] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1506. <6>[ 5174.103562] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1507. <7>[ 5174.136847] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1508. <6>[ 5174.151960] c0 mif: usb_port_resume: 1283, 4
  1509. <7>[ 5174.152080] c0 usb 1-2: finish resume
  1510. <7>[ 5174.352338] c0 usb 1-2: usb auto-suspend
  1511. <7>[ 5174.466755] c0 hub 1-0:1.0: hub_suspend
  1512. <7>[ 5174.466873] c0 usb usb1: bus auto-suspend
  1513. <7>[ 5174.466946] c0 s5p-ehci s5p-ehci: suspend root hub
  1514. <6>[ 5174.467561] c0 s5p-ehci s5p-ehci: host_phy_susp
  1515. <6>[ 5174.467648] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  1516. <6>[ 5175.964264] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1517. <6>[ 5175.964486] c0 s5p-ehci s5p-ehci: host_phy_resume
  1518. <6>[ 5175.964668] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1519. <7>[ 5175.964779] c0 usb usb1: usb auto-resume
  1520. <7>[ 5175.964863] c0 s5p-ehci s5p-ehci: resume root hub
  1521. <7>[ 5175.991935] c3 hub 1-0:1.0: hub_resume
  1522. <7>[ 5175.992133] c3 hub 1-0:1.0: port 2: status 0507 change 0000
  1523. <7>[ 5175.992373] c3 usb 1-2: usb auto-resume
  1524. <7>[ 5175.992500] c3 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1525. <6>[ 5175.993656] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1526. <7>[ 5176.026870] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1527. <6>[ 5176.042004] c0 mif: usb_port_resume: 1283, 4
  1528. <7>[ 5176.042147] c0 usb 1-2: finish resume
  1529. <7>[ 5176.242734] c3 usb 1-2: usb auto-suspend
  1530. <7>[ 5176.356817] c3 hub 1-0:1.0: hub_suspend
  1531. <7>[ 5176.356940] c3 usb usb1: bus auto-suspend
  1532. <7>[ 5176.357020] c3 s5p-ehci s5p-ehci: suspend root hub
  1533. <6>[ 5176.358013] c3 s5p-ehci s5p-ehci: host_phy_susp
  1534. <6>[ 5176.358107] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1535. <6>[ 5176.619706] c3 lcd panel: brightness=169, bl=18, candela=160
  1536. <6>[ 5176.769723] c0 lcd panel: brightness=159, bl=17, candela=150
  1537. <6>[ 5177.372433] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1538. <6>[ 5177.372645] c0 s5p-ehci s5p-ehci: host_phy_resume
  1539. <6>[ 5177.372826] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1540. <7>[ 5177.372937] c0 usb usb1: usb auto-resume
  1541. <7>[ 5177.373021] c0 s5p-ehci s5p-ehci: resume root hub
  1542. <7>[ 5177.401966] c1 hub 1-0:1.0: hub_resume
  1543. <7>[ 5177.402163] c1 hub 1-0:1.0: port 2: status 0507 change 0000
  1544. <7>[ 5177.402406] c1 usb 1-2: usb auto-resume
  1545. <7>[ 5177.402595] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1546. <6>[ 5177.403785] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1547. <7>[ 5177.436875] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1548. <6>[ 5177.451868] c1 mif: usb_port_resume: 1283, 4
  1549. <7>[ 5177.451988] c1 usb 1-2: finish resume
  1550. <7>[ 5177.654302] c1 usb 1-2: usb auto-suspend
  1551. <6>[ 5177.669841] c0 lcd panel: brightness=149, bl=16, candela=140
  1552. <7>[ 5177.766783] c1 hub 1-0:1.0: hub_suspend
  1553. <7>[ 5177.766913] c1 usb usb1: bus auto-suspend
  1554. <7>[ 5177.766994] c1 s5p-ehci s5p-ehci: suspend root hub
  1555. <6>[ 5177.767171] c1 s5p-ehci s5p-ehci: host_phy_susp
  1556. <6>[ 5177.767265] c1 s5p_ehci_runtime_suspend: usage=0, child=0
  1557. <6>[ 5177.801683] c0 pet_watchdog_timer_fn kicking...c8a7
  1558. <6>[ 5178.670097] c0 lcd panel: brightness=138, bl=15, candela=130
  1559. <6>[ 5178.736614] c0 lcd panel: brightness=129, bl=14, candela=120
  1560. <6>[ 5178.788943] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1561. <6>[ 5178.789056] c0 s5p-ehci s5p-ehci: host_phy_resume
  1562. <6>[ 5178.789187] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1563. <7>[ 5178.789242] c0 usb usb1: usb auto-resume
  1564. <7>[ 5178.789284] c0 s5p-ehci s5p-ehci: resume root hub
  1565. <7>[ 5178.816670] c0 hub 1-0:1.0: hub_resume
  1566. <7>[ 5178.816748] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1567. <7>[ 5178.816848] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1568. <7>[ 5178.816894] c0 usb 1-2: usb auto-resume
  1569. <6>[ 5178.817957] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1570. <7>[ 5178.851745] c1 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1571. <6>[ 5178.866752] c1 mif: usb_port_resume: 1283, 4
  1572. <7>[ 5178.866868] c1 usb 1-2: finish resume
  1573. <7>[ 5179.067763] c3 usb 1-2: usb auto-suspend
  1574. <7>[ 5179.181676] c3 hub 1-0:1.0: hub_suspend
  1575. <7>[ 5179.181715] c3 usb usb1: bus auto-suspend
  1576. <7>[ 5179.181740] c3 s5p-ehci s5p-ehci: suspend root hub
  1577. <6>[ 5179.182342] c3 s5p-ehci s5p-ehci: host_phy_susp
  1578. <6>[ 5179.182373] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1579. <6>[ 5179.736912] c0 lcd panel: brightness=119, bl=13, candela=110
  1580. <6>[ 5180.720489] c0 lcd panel: brightness=109, bl=12, candela=108
  1581. <6>[ 5180.803787] c0 lcd panel: brightness=103, bl=9, candela=102
  1582. <6>[ 5181.001267] c3 [BT] bt_lpm_exit_lpm_locked.
  1583. <6>[ 5181.005666] c3 [BT] bt_lpm_exit_lpm_locked.
  1584. <6>[ 5181.006554] c3 [BT] bt_lpm_exit_lpm_locked.
  1585. <6>[ 5181.009266] c3 [BT] bt_lpm_exit_lpm_locked.
  1586. <6>[ 5181.010163] c3 [BT] bt_lpm_exit_lpm_locked.
  1587. <6>[ 5181.011083] c3 [BT] bt_lpm_exit_lpm_locked.
  1588. <6>[ 5181.098607] c2 lsm330dlc_accel_ioctl: opened = 1, enable = 0
  1589. <6>[ 5181.101303] c1 lsm330dlc_gyro_set_enable, 563 enable : 0.
  1590. <6>[ 5181.101803] c1 lsm330dlc_gyro_set_enable, 616 lsm330dlc_gyro enable is done.
  1591. <6>[ 5181.105424] c1 set_gps_uart_op: off
  1592. <6>[ 5181.105618] c2 lps331ap_set_enable
  1593. <6>[ 5181.105655] c2 lps331ap_prs_disable
  1594. <6>[ 5181.603920] c0 lcd panel: brightness=101, bl=8, candela=100
  1595. <6>[ 5181.687267] c0 lcd panel: brightness=96, bl=7, candela=90
  1596. <6>[ 5181.753932] c0 lcd panel: brightness=89, bl=6, candela=80
  1597. <6>[ 5181.870638] c0 lcd panel: brightness=79, bl=5, candela=70
  1598. <6>[ 5182.670807] c0 lcd panel: brightness=69, bl=4, candela=60
  1599. <6>[ 5182.801685] c0 pet_watchdog_timer_fn kicking...c9da
  1600. <6>[ 5183.025919] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1601. <6>[ 5183.026119] c0 s5p-ehci s5p-ehci: host_phy_resume
  1602. <6>[ 5183.026302] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1603. <7>[ 5183.026414] c0 usb usb1: usb auto-resume
  1604. <7>[ 5183.026497] c0 s5p-ehci s5p-ehci: resume root hub
  1605. <7>[ 5183.051907] c0 hub 1-0:1.0: hub_resume
  1606. <7>[ 5183.052075] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1607. <7>[ 5183.052304] c1 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1608. <7>[ 5183.052399] c0 usb 1-2: usb auto-resume
  1609. <6>[ 5183.053646] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1610. <7>[ 5183.086823] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1611. <3>[ 5183.101826] c0 [HOTPLUG OUT] check_down 200000<=200000 && 184<300
  1612. <3>[ 5183.101949] c0 CPU_DOWN 1
  1613. <6>[ 5183.102217] c0 mif: usb_port_resume: 1283, 4
  1614. <7>[ 5183.102353] c0 usb 1-2: finish resume
  1615. <5>[ 5183.114640] c0 CPU1: shutdown
  1616. <7>[ 5183.303726] c3 usb 1-2: usb auto-suspend
  1617. <7>[ 5183.416813] c3 hub 1-0:1.0: hub_suspend
  1618. <7>[ 5183.416935] c3 usb usb1: bus auto-suspend
  1619. <7>[ 5183.417017] c3 s5p-ehci s5p-ehci: suspend root hub
  1620. <6>[ 5183.417648] c3 s5p-ehci s5p-ehci: host_phy_susp
  1621. <6>[ 5183.417744] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1622. <3>[ 5185.101955] c0 [HOTPLUG OUT] check_down 200000<=200000 && 199<200
  1623. <3>[ 5185.102078] c0 CPU_DOWN 2
  1624. <5>[ 5185.108641] c0 CPU2: shutdown
  1625. <6>[ 5185.837927] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1626. <6>[ 5185.838211] c0 s5p-ehci s5p-ehci: host_phy_resume
  1627. <6>[ 5185.838394] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1628. <7>[ 5185.838506] c0 usb usb1: usb auto-resume
  1629. <7>[ 5185.838591] c0 s5p-ehci s5p-ehci: resume root hub
  1630. <7>[ 5185.866836] c0 hub 1-0:1.0: hub_resume
  1631. <7>[ 5185.867005] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1632. <7>[ 5185.867244] c0 usb 1-2: usb auto-resume
  1633. <7>[ 5185.867373] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1634. <6>[ 5185.868651] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1635. <7>[ 5185.903274] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1636. <6>[ 5185.916735] c0 mif: usb_port_resume: 1283, 4
  1637. <7>[ 5185.916854] c0 usb 1-2: finish resume
  1638. <7>[ 5186.117432] c3 usb 1-2: usb auto-suspend
  1639. <7>[ 5186.231764] c3 hub 1-0:1.0: hub_suspend
  1640. <7>[ 5186.231893] c3 usb usb1: bus auto-suspend
  1641. <7>[ 5186.231974] c3 s5p-ehci s5p-ehci: suspend root hub
  1642. <6>[ 5186.232746] c3 s5p-ehci s5p-ehci: host_phy_susp
  1643. <6>[ 5186.232842] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1644. <6>[ 5186.311794] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1645. <6>[ 5186.312022] c0 s5p-ehci s5p-ehci: host_phy_resume
  1646. <6>[ 5186.312208] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1647. <7>[ 5186.312318] c0 usb usb1: usb auto-resume
  1648. <7>[ 5186.312401] c0 s5p-ehci s5p-ehci: resume root hub
  1649. <7>[ 5186.341747] c0 hub 1-0:1.0: hub_resume
  1650. <7>[ 5186.341910] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1651. <7>[ 5186.342148] c0 usb 1-2: usb auto-resume
  1652. <7>[ 5186.342275] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1653. <6>[ 5186.343315] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1654. <7>[ 5186.376798] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1655. <6>[ 5186.391771] c0 mif: usb_port_resume: 1283, 4
  1656. <7>[ 5186.391893] c0 usb 1-2: finish resume
  1657. <6>[ 5186.429905] c0 max77686_rtc_set_time: 115/6/12 14:12:50(0)
  1658. <6>[ 5186.456963] c0 max77686_rtc_set_time: task=Binder_9[11774]
  1659. <7>[ 5186.767179] c3 usb 1-2: usb auto-suspend
  1660. <6>[ 5186.838053] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1661. <7>[ 5186.838140] c3 usb 1-2: usb auto-resume
  1662. <6>[ 5186.840074] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1663. <7>[ 5186.871768] c3 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1664. <6>[ 5186.886696] c3 mif: usb_port_resume: 1283, 4
  1665. <7>[ 5186.886740] c3 usb 1-2: finish resume
  1666. <7>[ 5187.087547] c3 usb 1-2: usb auto-suspend
  1667. <3>[ 5187.101707] c0 [HOTPLUG IN] check_up 1400000>=500000 && 402>200
  1668. <3>[ 5187.101781] c0 CPU_UP 1
  1669. <4>[ 5187.114970] c1 CPU1: Booted secondary processor
  1670. <6>[ 5187.115034] c1 notifier_call_chain : NOTIFY BAD tick_notify
  1671. <6>[ 5187.116641] c1 Switched to NOHz mode on CPU #1
  1672. <7>[ 5187.201885] c3 hub 1-0:1.0: hub_suspend
  1673. <7>[ 5187.201929] c3 usb usb1: bus auto-suspend
  1674. <7>[ 5187.201957] c3 s5p-ehci s5p-ehci: suspend root hub
  1675. <6>[ 5187.202496] c3 s5p-ehci s5p-ehci: host_phy_susp
  1676. <6>[ 5187.202525] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1677. <6>[ 5187.801717] c0 pet_watchdog_timer_fn kicking...c7b8
  1678. <3>[ 5190.151870] c0 [HOTPLUG OUT] check_down 200000<=200000 && 187<200
  1679. <3>[ 5190.151997] c0 CPU_DOWN 1
  1680. <5>[ 5190.160633] c0 CPU1: shutdown
  1681. <6>[ 5191.021906] c3 [BT] bt_lpm_exit_lpm_locked.
  1682. <6>[ 5191.027639] c3 [BT] bt_lpm_exit_lpm_locked.
  1683. <6>[ 5191.029066] c3 [BT] bt_lpm_exit_lpm_locked.
  1684. <6>[ 5192.801686] c0 pet_watchdog_timer_fn kicking...ca16
  1685. <6>[ 5197.801673] c0 pet_watchdog_timer_fn kicking...ca16
  1686. <6>[ 5199.140559] c0 lcd panel: brightness=70, bl=5, candela=70
  1687. <6>[ 5199.273902] c0 lcd panel: brightness=81, bl=6, candela=80
  1688. <6>[ 5199.390599] c0 lcd panel: brightness=90, bl=7, candela=90
  1689. <6>[ 5199.507273] c0 lcd panel: brightness=101, bl=8, candela=100
  1690. <6>[ 5199.526081] c0 cm36651_work_func_light, red = 12978 green = 11896 blue = 9840 white = 17462
  1691. <6>[ 5199.557182] c0 lcd panel: brightness=105, bl=10, candela=104
  1692. <6>[ 5199.590601] c0 lcd panel: brightness=109, bl=12, candela=108
  1693. <6>[ 5199.674013] c0 lcd panel: brightness=111, bl=13, candela=110
  1694. <6>[ 5199.757396] c0 lcd panel: brightness=121, bl=14, candela=120
  1695. <6>[ 5199.890754] c0 lcd panel: brightness=130, bl=15, candela=130
  1696. <6>[ 5200.024106] c0 lcd panel: brightness=141, bl=16, candela=140
  1697. <6>[ 5200.140765] c0 lcd panel: brightness=150, bl=17, candela=150
  1698. <6>[ 5200.274154] c0 lcd panel: brightness=161, bl=18, candela=160
  1699. <6>[ 5200.390848] c0 lcd panel: brightness=170, bl=19, candela=170
  1700. <6>[ 5200.527009] c0 lcd panel: brightness=181, bl=20, candela=180
  1701. <6>[ 5200.590842] c0 lcd panel: brightness=183, bl=21, candela=182
  1702. <6>[ 5200.624043] c0 lcd panel: brightness=187, bl=23, candela=186
  1703. <6>[ 5200.640790] c0 lcd panel: brightness=190, bl=25, candela=190
  1704. <6>[ 5201.657644] c0 lcd panel: brightness=200, bl=26, candela=200
  1705. <6>[ 5202.674552] c0 lcd panel: brightness=210, bl=27, candela=210
  1706. <6>[ 5202.801701] c0 pet_watchdog_timer_fn kicking...c99e
  1707. <6>[ 5203.121358] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1708. <6>[ 5203.121571] c0 s5p-ehci s5p-ehci: host_phy_resume
  1709. <6>[ 5203.121852] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1710. <7>[ 5203.121970] c0 usb usb1: usb auto-resume
  1711. <7>[ 5203.122055] c0 s5p-ehci s5p-ehci: resume root hub
  1712. <7>[ 5203.151986] c0 hub 1-0:1.0: hub_resume
  1713. <7>[ 5203.152153] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1714. <7>[ 5203.152388] c0 usb 1-2: usb auto-resume
  1715. <7>[ 5203.152716] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1716. <6>[ 5203.153707] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1717. <7>[ 5203.186811] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1718. <6>[ 5203.202256] c0 mif: usb_port_resume: 1283, 4
  1719. <7>[ 5203.202375] c0 usb 1-2: finish resume
  1720. <7>[ 5203.403632] c0 usb 1-2: usb auto-suspend
  1721. <7>[ 5203.516851] c0 hub 1-0:1.0: hub_suspend
  1722. <7>[ 5203.516974] c0 usb usb1: bus auto-suspend
  1723. <7>[ 5203.517058] c0 s5p-ehci s5p-ehci: suspend root hub
  1724. <6>[ 5203.518210] c0 s5p-ehci s5p-ehci: host_phy_susp
  1725. <6>[ 5203.518785] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  1726. <6>[ 5205.549340] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1727. <6>[ 5205.549550] c0 s5p-ehci s5p-ehci: host_phy_resume
  1728. <6>[ 5205.549735] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1729. <7>[ 5205.549848] c0 usb usb1: usb auto-resume
  1730. <7>[ 5205.549933] c0 s5p-ehci s5p-ehci: resume root hub
  1731. <7>[ 5205.576782] c0 hub 1-0:1.0: hub_resume
  1732. <7>[ 5205.576953] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1733. <7>[ 5205.577189] c0 usb 1-2: usb auto-resume
  1734. <7>[ 5205.577319] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1735. <6>[ 5205.578517] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1736. <7>[ 5205.611795] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1737. <6>[ 5205.626772] c0 mif: usb_port_resume: 1283, 4
  1738. <7>[ 5205.626893] c0 usb 1-2: finish resume
  1739. <7>[ 5205.828332] c3 usb 1-2: usb auto-suspend
  1740. <7>[ 5205.941833] c3 hub 1-0:1.0: hub_suspend
  1741. <7>[ 5205.941962] c3 usb usb1: bus auto-suspend
  1742. <7>[ 5205.942047] c3 s5p-ehci s5p-ehci: suspend root hub
  1743. <6>[ 5205.943088] c3 s5p-ehci s5p-ehci: host_phy_susp
  1744. <6>[ 5205.943184] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1745. <6>[ 5207.428483] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1746. <6>[ 5207.428691] c0 s5p-ehci s5p-ehci: host_phy_resume
  1747. <6>[ 5207.428874] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1748. <7>[ 5207.428986] c0 usb usb1: usb auto-resume
  1749. <7>[ 5207.429069] c0 s5p-ehci s5p-ehci: resume root hub
  1750. <7>[ 5207.456795] c0 hub 1-0:1.0: hub_resume
  1751. <7>[ 5207.456964] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1752. <7>[ 5207.457203] c0 usb 1-2: usb auto-resume
  1753. <7>[ 5207.457333] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1754. <6>[ 5207.458468] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1755. <7>[ 5207.491854] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1756. <6>[ 5207.506758] c0 mif: usb_port_resume: 1283, 4
  1757. <7>[ 5207.506878] c0 usb 1-2: finish resume
  1758. <6>[ 5207.629180] c0 max77686_rtc_set_time: 115/6/12 14:13:11(0)
  1759. <6>[ 5207.651975] c0 max77686_rtc_set_time: task=Binder_A[11793]
  1760. <6>[ 5207.801632] c0 pet_watchdog_timer_fn kicking...c9e3
  1761. <7>[ 5207.822209] c3 usb 1-2: usb auto-suspend
  1762. <7>[ 5207.936703] c3 hub 1-0:1.0: hub_suspend
  1763. <7>[ 5207.936743] c3 usb usb1: bus auto-suspend
  1764. <7>[ 5207.936770] c3 s5p-ehci s5p-ehci: suspend root hub
  1765. <6>[ 5207.937173] c3 s5p-ehci s5p-ehci: host_phy_susp
  1766. <6>[ 5207.937204] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1767. <6>[ 5208.567956] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1768. <6>[ 5208.568196] c0 s5p-ehci s5p-ehci: host_phy_resume
  1769. <6>[ 5208.568380] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1770. <7>[ 5208.569763] c0 usb usb1: usb auto-resume
  1771. <7>[ 5208.569857] c0 s5p-ehci s5p-ehci: resume root hub
  1772. <7>[ 5208.596755] c0 hub 1-0:1.0: hub_resume
  1773. <7>[ 5208.596921] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1774. <7>[ 5208.597125] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1775. <7>[ 5208.597408] c0 usb 1-2: usb auto-resume
  1776. <6>[ 5208.598583] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1777. <6>[ 5208.625657] c0 lcd panel: brightness=220, bl=28, candela=220
  1778. <7>[ 5208.631830] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1779. <6>[ 5208.646760] c0 mif: usb_port_resume: 1283, 4
  1780. <7>[ 5208.646889] c0 usb 1-2: finish resume
  1781. <7>[ 5208.847960] c0 usb 1-2: usb auto-suspend
  1782. <7>[ 5208.961687] c0 hub 1-0:1.0: hub_suspend
  1783. <7>[ 5208.961757] c0 usb usb1: bus auto-suspend
  1784. <7>[ 5208.961802] c0 s5p-ehci s5p-ehci: suspend root hub
  1785. <6>[ 5208.961971] c0 s5p-ehci s5p-ehci: host_phy_susp
  1786. <6>[ 5208.962023] c0 s5p_ehci_runtime_suspend: usage=0, child=0
  1787. <6>[ 5212.559513] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1788. <6>[ 5212.559827] c0 s5p-ehci s5p-ehci: host_phy_resume
  1789. <6>[ 5212.560012] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1790. <7>[ 5212.560123] c0 usb usb1: usb auto-resume
  1791. <7>[ 5212.560205] c0 s5p-ehci s5p-ehci: resume root hub
  1792. <7>[ 5212.586756] c0 hub 1-0:1.0: hub_resume
  1793. <7>[ 5212.586925] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1794. <7>[ 5212.587162] c0 usb 1-2: usb auto-resume
  1795. <7>[ 5212.587290] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1796. <6>[ 5212.588651] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1797. <7>[ 5212.621847] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1798. <6>[ 5212.636741] c0 mif: usb_port_resume: 1283, 4
  1799. <7>[ 5212.636864] c0 usb 1-2: finish resume
  1800. <6>[ 5212.801674] c0 pet_watchdog_timer_fn kicking...c89c
  1801. <7>[ 5212.837256] c3 usb 1-2: usb auto-suspend
  1802. <7>[ 5212.952038] c3 hub 1-0:1.0: hub_suspend
  1803. <7>[ 5212.952161] c3 usb usb1: bus auto-suspend
  1804. <7>[ 5212.952243] c3 s5p-ehci s5p-ehci: suspend root hub
  1805. <6>[ 5212.953357] c3 s5p-ehci s5p-ehci: host_phy_susp
  1806. <6>[ 5212.953454] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1807. <4>[ 5214.326110] c0 healthd: max77693-charger: Unknown power supply type
  1808. <4>[ 5214.331488] c0 healthd: battery [l=93 v=4169 t=51.8 h=2 st=3] c=0 dock-battery none chg=
  1809. <6>[ 5214.402329] c0 sec-thermistor sec-thermistor: notify_change_of_temperature: uevent: TEMPERATURE=500
  1810. <6>[ 5214.562284] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1811. <6>[ 5214.562493] c0 s5p-ehci s5p-ehci: host_phy_resume
  1812. <6>[ 5214.562676] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1813. <7>[ 5214.562787] c0 usb usb1: usb auto-resume
  1814. <7>[ 5214.562869] c0 s5p-ehci s5p-ehci: resume root hub
  1815. <7>[ 5214.591752] c0 hub 1-0:1.0: hub_resume
  1816. <7>[ 5214.591917] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1817. <7>[ 5214.592154] c0 usb 1-2: usb auto-resume
  1818. <7>[ 5214.592282] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1819. <6>[ 5214.593837] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1820. <7>[ 5214.626914] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1821. <6>[ 5214.641740] c0 mif: usb_port_resume: 1283, 4
  1822. <7>[ 5214.641860] c0 usb 1-2: finish resume
  1823. <7>[ 5214.843386] c3 usb 1-2: usb auto-suspend
  1824. <7>[ 5214.956832] c3 hub 1-0:1.0: hub_suspend
  1825. <7>[ 5214.956956] c3 usb usb1: bus auto-suspend
  1826. <7>[ 5214.957036] c3 s5p-ehci s5p-ehci: suspend root hub
  1827. <6>[ 5214.958022] c3 s5p-ehci s5p-ehci: host_phy_susp
  1828. <6>[ 5214.958118] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1829. <6>[ 5217.801719] c0 pet_watchdog_timer_fn kicking...ca51
  1830. <6>[ 5221.148931] c3 [BT] bt_lpm_exit_lpm_locked.
  1831. <6>[ 5221.155215] c3 [BT] bt_lpm_exit_lpm_locked.
  1832. <6>[ 5221.156091] c3 [BT] bt_lpm_exit_lpm_locked.
  1833. <6>[ 5221.159131] c3 [BT] bt_lpm_exit_lpm_locked.
  1834. <6>[ 5221.159895] c3 [BT] bt_lpm_exit_lpm_locked.
  1835. <6>[ 5221.160661] c3 [BT] bt_lpm_exit_lpm_locked.
  1836. <6>[ 5222.801694] c0 pet_watchdog_timer_fn kicking...ca51
  1837. <3>[ 5224.002963] c0 [HOTPLUG IN] check_up 1200000>=500000 && 378>200
  1838. <3>[ 5224.003035] c0 CPU_UP 1
  1839. <4>[ 5224.018063] c1 CPU1: Booted secondary processor
  1840. <6>[ 5224.018130] c1 notifier_call_chain : NOTIFY BAD tick_notify
  1841. <6>[ 5224.021652] c1 Switched to NOHz mode on CPU #1
  1842. <4>[ 5224.881124] c1 Mali: mem_usage before 27691 : 92798976
  1843. <7>[ 5226.902075] c0 [TouchKey] keycode:158 pressed:1
  1844. <7>[ 5226.992351] c0 [TouchKey] keycode:158 pressed:0
  1845. <6>[ 5227.801742] c0 pet_watchdog_timer_fn kicking...bfec
  1846. <6>[ 5228.690484] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1847. <6>[ 5228.690728] c0 s5p-ehci s5p-ehci: host_phy_resume
  1848. <6>[ 5228.690913] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1849. <7>[ 5228.691025] c0 usb usb1: usb auto-resume
  1850. <7>[ 5228.691108] c0 s5p-ehci s5p-ehci: resume root hub
  1851. <7>[ 5228.716760] c0 hub 1-0:1.0: hub_resume
  1852. <7>[ 5228.716926] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1853. <7>[ 5228.717128] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1854. <7>[ 5228.717352] c0 usb 1-2: usb auto-resume
  1855. <6>[ 5228.718644] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]
  1856. <7>[ 5228.751909] c0 s5p-ehci s5p-ehci: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
  1857. <6>[ 5228.766752] c0 mif: usb_port_resume: 1283, 4
  1858. <7>[ 5228.766868] c0 usb 1-2: finish resume
  1859. <7>[ 5228.967912] c3 usb 1-2: usb auto-suspend
  1860. <7>[ 5229.081665] c3 hub 1-0:1.0: hub_suspend
  1861. <7>[ 5229.081707] c3 usb usb1: bus auto-suspend
  1862. <7>[ 5229.081730] c3 s5p-ehci s5p-ehci: suspend root hub
  1863. <6>[ 5229.082205] c3 s5p-ehci s5p-ehci: host_phy_susp
  1864. <6>[ 5229.082233] c3 s5p_ehci_runtime_suspend: usage=0, child=0
  1865. <4>[ 5229.434239] c0 Mali: mem_usage before 27519 : 88342528
  1866. <6>[ 5230.525804] c0 cm36651_work_func_light, red = 9862 green = 9894 blue = 6994 white = 13656
  1867. <6>[ 5231.158607] c3 [BT] bt_lpm_exit_lpm_locked.
  1868. <6>[ 5231.163631] c3 [BT] bt_lpm_exit_lpm_locked.
  1869. <6>[ 5231.164378] c3 [BT] bt_lpm_exit_lpm_locked.
  1870. <36>[ 5231.240304] c1 type=1400 audit(1436710414.608:538): avc: denied { mounton } for pid=27772 comm="daemonsu" path="/storage/emulated/0/Android/obb" dev=fuse ino=166 scontext=u:r:init:s0 tcontext=u:object_r:fuse:s0 tclass=dir
  1871. <36>[ 5231.246229] c1 type=1300 audit(1436710414.608:538): arch=40000028 syscall=21 per=800000 success=yes exit=0 a0=413a4c9c a1=413a7c9c a2=0 a3=1000 items=2 ppid=2328 pid=27772 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="daemonsu" exe="/system/xbin/daemonsu" subj=u:r:init:s0 key=(null)
  1872. <36>[ 5231.246659] c1 type=1307 audit(1436710414.608:538): cwd="/"
  1873. <36>[ 5231.247016] c1 type=1302 audit(1436710414.608:538): item=0 name="/storage/emulated/0/Android/obb" inode=166 dev=00:13 mode=040771 ouid=0 ogid=1028 rdev=00:00 obj=u:object_r:fuse:s0
  1874. <36>[ 5231.247216] c1 type=1302 audit(1436710414.608:538): item=1 name=(null) inode=11676 dev=00:13 mode=040771 ouid=0 ogid=1028 rdev=00:00 obj=u:object_r:fuse:s0
  1875. <36>[ 5231.247533] c1 type=1320 audit(1436710414.608:538):
  1876. <6>[ 5231.433065] c0 SysRq : Emergency Remount R/O
  1877. <6>[ 5231.437004] c0 EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
  1878. <6>[ 5231.441451] c0 EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
  1879. <6>[ 5231.443156] c0 EXT4-fs (mmcblk0p10): re-mounted. Opts: (null)
  1880. <6>[ 5231.450538] c0 EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
  1881. <4>[ 5231.458251] c0 Emergency Remount complete
  1882. <6>[ 5231.515146] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
  1883. <6>[ 5231.515209] c0 s5p-ehci s5p-ehci: host_phy_resume
  1884. <6>[ 5231.515322] c0 s5p_ehci_runtime_resume: usage=1, child=0
  1885. <7>[ 5231.515358] c0 usb usb1: usb auto-resume
  1886. <7>[ 5231.515384] c0 s5p-ehci s5p-ehci: resume root hub
  1887. <0>[ 5231.534136] c0 (sec_debug_set_upload_magic) 0
  1888. <6>[ 5231.534420] c0 REBOOT Notifier for CPUFREQ
  1889. <6>[ 5231.536299] c0 REBOOT Notifier for BUSFREQ
  1890. <6>[ 5231.536336] c0 lcdfreq lcdfreq: lcdfreq_reboot_notify
  1891. <7>[ 5231.541659] c0 hub 1-0:1.0: hub_resume
  1892. <7>[ 5231.541701] c0 hub 1-0:1.0: port 2: status 0507 change 0000
  1893. <7>[ 5231.541761] c0 usb 1-2: usb auto-resume
  1894. <7>[ 5231.541791] c0 hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
  1895. <6>[ 5231.541884] c0 modem_if modem_if.1: shutdown +: platform_drv_shutdown+0x0/0x28
  1896. <6>[ 5231.541927] c0 mif: xmm6262_off:
  1897. <6>[ 5231.541948] c0 modem_if modem_if.1: shutdown -
  1898. <6>[ 5231.541974] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x28
  1899. <6>[ 5231.542007] c0 s5p-ohci s5p-ohci: shutdown -
  1900. <6>[ 5231.542031] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x28
  1901. <6>[ 5231.542416] c0 s5p-ehci s5p-ehci: shutdown -
  1902. <6>[ 5231.542708] c0 lps331ap 11-005d: shutdown +: i2c_device_shutdown+0x0/0x54
  1903. <6>[ 5231.542739] c0 lps331ap 11-005d: shutdown -
  1904. <6>[ 5231.542764] c0 ak8975 10-000c: shutdown +: i2c_device_shutdown+0x0/0x54
  1905. <6>[ 5231.542796] c0 ak8975 10-000c: shutdown -
  1906. <6>[ 5231.542820] c0 cm36651 9-0018: shutdown +: i2c_device_shutdown+0x0/0x54
  1907. <6>[ 5231.542850] c0 cm36651 9-0018: shutdown -
  1908. <6>[ 5231.542874] c0 lsm330dlc_gyro 1-006b: shutdown +: i2c_device_shutdown+0x0/0x54
  1909. <6>[ 5231.542907] c0 lsm330dlc_gyro 1-006b: shutdown -
  1910. <6>[ 5231.542933] c0 lsm330dlc_accel 1-0019: shutdown +: i2c_device_shutdown+0x0/0x54
  1911. <6>[ 5231.542966] c0 lsm330dlc_accel_shutdown: is called.
  1912. <6>[ 5231.543121] c0 lsm330dlc_accel 1-0019: shutdown -
  1913. <6>[ 5231.543152] c0 pn65n 5-002b: shutdown +: i2c_device_shutdown+0x0/0x54
  1914. <6>[ 5231.543183] c0 pn65n 5-002b: shutdown -
  1915. <6>[ 5231.543207] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x54
  1916. <6>[ 5231.543240] c0 s5p_ddc 5-003a: shutdown -
  1917. <6>[ 5231.543265] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x54
  1918. <6>[ 5231.543309] c0 sii9234_cbus 15-0064: shutdown -
  1919. <6>[ 5231.543335] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x54
  1920. <6>[ 5231.543370] c0 sii9234_hdmi_rx 15-0049: shutdown -
  1921. <6>[ 5231.543397] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x54
  1922. <6>[ 5231.543428] c0 sii9234_tpi 15-003d: shutdown -
  1923. <6>[ 5231.543454] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x54
  1924. <6>[ 5231.543487] c0 sii9234_mhl_tx 15-0039: shutdown -
  1925. <6>[ 5231.543597] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x54
  1926. <6>[ 5231.543626] c0 i2c 5-0009: shutdown -
  1927. <6>[ 5231.543650] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x54
  1928. <6>[ 5231.543679] c0 i2c i2c-5: shutdown -
  1929. <6>[ 5231.543701] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x28
  1930. <6>[ 5231.543738] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
  1931. <6>[ 5231.591665] c3 mif: usb_port_resume: 0, 0
  1932. <7>[ 5231.591698] c3 hub 1-0:1.0: port 2 status 0000.0000 after resume, -19
  1933. <7>[ 5231.591732] c3 usb 1-2: can't resume, status -19
  1934. <7>[ 5231.591757] c3 hub 1-0:1.0: logical disconnect on port 2
  1935. <3>[ 5231.591805] c3 mif: link_pm_runtime_work: resume error(-19)
  1936. <7>[ 5231.591835] c0 hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
  1937. <7>[ 5231.591874] c0 hub 1-0:1.0: port 2, status 0000, change 0000, 12 Mb/s
  1938. <6>[ 5231.591923] c0 usb 1-2: USB disconnect, device number 2 by hub_thread+0xd18/0x1464
  1939. <6>[ 5231.591960] c0 call_battery_notify : VID : 0x1519, PID : 0x20 skipped.
  1940. <7>[ 5231.591992] c0 usb 1-2: unregistering device
  1941. <7>[ 5231.592015] c0 usb 1-2: unregistering interface 1-2:1.0
  1942. <6>[ 5231.592157] c0 mif: if_usb_disconnect:
  1943. <6>[ 5231.592182] c0 mif: if_usb_disconnect: put dev 0xeb882800
  1944. <7>[ 5231.592363] c0 usb 1-2: unregistering interface 1-2:1.1
  1945. <6>[ 5231.592510] c0 mif: if_usb_disconnect:
  1946. <7>[ 5231.592614] c0 usb 1-2: unregistering interface 1-2:1.2
  1947. <6>[ 5231.592731] c0 mif: if_usb_disconnect:
  1948. <6>[ 5231.592754] c0 mif: if_usb_disconnect: put dev 0xeb882800
  1949. <7>[ 5231.592873] c0 usb 1-2: unregistering interface 1-2:1.3
  1950. <6>[ 5231.593005] c0 mif: if_usb_disconnect:
  1951. <7>[ 5231.593122] c0 usb 1-2: unregistering interface 1-2:1.4
  1952. <6>[ 5231.593232] c0 mif: if_usb_disconnect:
  1953. <6>[ 5231.593256] c0 mif: if_usb_disconnect: put dev 0xeb882800
  1954. <7>[ 5231.593527] c0 usb 1-2: unregistering interface 1-2:1.5
  1955. <6>[ 5231.593699] c0 mif: if_usb_disconnect:
  1956. <7>[ 5231.594001] c0 usb 1-2: unregistering interface 1-2:1.6
  1957. <6>[ 5231.594102] c0 mif: if_usb_disconnect:
  1958. <6>[ 5231.594125] c0 mif: if_usb_disconnect: put dev 0xeb882800
  1959. <7>[ 5231.594383] c0 usb 1-2: unregistering interface 1-2:1.7
  1960. <6>[ 5231.594511] c0 mif: if_usb_disconnect:
  1961. <7>[ 5231.594787] c0 usb 1-2: usb_disable_device nuking all URBs
  1962. <6>[ 5231.617088] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
  1963. <6>[ 5231.617122] c0 max77686_rtc_shutdown: success to disable WTSR
  1964. <6>[ 5231.617159] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
  1965. <6>[ 5231.666650] c1 max77686-rtc max77686-rtc: shutdown -
  1966. <6>[ 5231.666726] c1 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x54
  1967. <6>[ 5231.666763] c1 dummy 7-0006: shutdown -
  1968. <6>[ 5231.666791] c1 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x54
  1969. <6>[ 5231.666829] c1 max77686 7-0009: shutdown -
  1970. <6>[ 5231.666857] c1 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x54
  1971. <6>[ 5231.666891] c1 i2c i2c-7: shutdown -
  1972. <6>[ 5231.666915] c1 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x54
  1973. <6>[ 5231.666951] c1 wm8994 4-001a: shutdown -
  1974. <6>[ 5231.666977] c1 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x54
  1975. <6>[ 5231.667011] c1 i2c i2c-4: shutdown -
  1976. <6>[ 5231.667037] c1 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x54
  1977. <6>[ 5231.667079] c1 melfas-ts 3-0048: shutdown -
  1978. <6>[ 5231.667108] c1 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x54
  1979. <6>[ 5231.667143] c1 i2c i2c-3: shutdown -
  1980. <6>[ 5231.667170] c1 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x54
  1981. <6>[ 5231.667206] c1 i2c i2c-1: shutdown -
  1982. <6>[ 5231.667234] c1 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x54
  1983. <6>[ 5231.667270] c1 i2c i2c-0: shutdown -
  1984. <6>[ 5231.667299] c1 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x54
  1985. <6>[ 5231.667337] c1 i2c i2c-12: shutdown -
  1986. <6>[ 5231.667367] c1 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x54
  1987. <6>[ 5231.667406] c1 an30259a 21-0030: shutdown -
  1988. <6>[ 5231.667437] c1 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x54
  1989. <6>[ 5231.667474] c1 i2c i2c-21: shutdown -
  1990. <6>[ 5231.667512] c1 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0xf0
  1991. <6>[ 5231.667562] c1 max77693-muic:max77693_muic_shutdown +
  1992. <6>[ 5231.667596] c1 max77693-muic:max77693_muic_shutdown max77693->iolock.count.counter=1
  1993. <6>[ 5231.667645] c1 max77693-muic:max77693_muic_shutdown JIGSet: auto detection
  1994. <6>[ 5231.668838] c1 max77693-muic:max77693_muic_shutdown -
  1995. <6>[ 5231.668876] c1 max77693-muic max77693-muic: shutdown -
  1996. <6>[ 5231.668928] c1 max77693-charger max77693-charger: shutdown +: max77693_charger_shutdown+0x0/0x84
  1997. <6>[ 5231.670314] c1 func:max77693_charger_shutdown
  1998. <6>[ 5231.670352] c1 max77693-charger max77693-charger: shutdown -
  1999. <6>[ 5231.670400] c1 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x54
  2000. <6>[ 5231.670442] c1 dummy 17-0048: shutdown -
  2001. <6>[ 5231.670475] c1 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x54
  2002. <6>[ 5231.670520] c1 dummy 17-0025: shutdown -
  2003. <6>[ 5231.670552] c1 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x54
  2004. <6>[ 5231.670599] c1 max77693 17-0066: shutdown -
  2005. <6>[ 5231.670630] c1 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x54
  2006. <6>[ 5231.670672] c1 i2c i2c-17: shutdown -
  2007. <6>[ 5231.670707] c1 i2c i2c-16: shutdown +: i2c_device_shutdown+0x0/0x54
  2008. <6>[ 5231.670759] c1 i2c i2c-16: shutdown -
  2009. <6>[ 5231.670795] c1 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x54
  2010. <6>[ 5231.671019] c1 i2c i2c-15: shutdown -
  2011. <6>[ 5231.671145] c1 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x54
  2012. <6>[ 5231.671197] c1 max17047-fuelgauge 14-0036: shutdown -
  2013. <6>[ 5231.671236] c1 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x54
  2014. <6>[ 5231.671278] c1 i2c i2c-14: shutdown -
  2015. <6>[ 5231.671310] c1 i2c i2c-11: shutdown +: i2c_device_shutdown+0x0/0x54
  2016. <6>[ 5231.671348] c1 i2c i2c-11: shutdown -
  2017. <6>[ 5231.671381] c1 i2c i2c-10: shutdown +: i2c_device_shutdown+0x0/0x54
  2018. <6>[ 5231.671423] c1 i2c i2c-10: shutdown -
  2019. <6>[ 5231.671453] c1 i2c i2c-9: shutdown +: i2c_device_shutdown+0x0/0x54
  2020. <6>[ 5231.671810] c1 i2c i2c-9: shutdown -
  2021. <6>[ 5231.671852] c1 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x54
  2022. <6>[ 5231.671897] c1 sec_touchkey_driver 8-0020: shutdown -
  2023. <6>[ 5231.671933] c1 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x54
  2024. <6>[ 5231.671971] c1 i2c i2c-8: shutdown -
  2025. <6>[ 5231.671997] c1 Si47xx 19-0011: shutdown +: i2c_device_shutdown+0x0/0x54
  2026. <6>[ 5231.672032] c1 Si47xx 19-0011: shutdown -
  2027. <6>[ 5231.672060] c1 i2c i2c-19: shutdown +: i2c_device_shutdown+0x0/0x54
  2028. <6>[ 5231.672094] c1 i2c i2c-19: shutdown -
  2029. <6>[ 5231.672228] c1 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x28
  2030. <6>[ 5231.672289] c1 s3c-sdhci s3c-sdhci.3: shutdown -
  2031. <6>[ 5231.672327] c1 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x28
  2032. <6>[ 5231.674119] c0 sdhci_shutdown_host : MMC Card OFF
  2033. <6>[ 5231.680056] c0 s3c-sdhci s3c-sdhci.2: shutdown -
  2034. <6>[ 5231.680129] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x28
  2035. <6>[ 5231.680177] c0 mdnie mdnie: shutdown -
  2036. <4>[ 5231.680374] c0 Disabling non-boot CPUs ...
  2037. <5>[ 5231.682415] c0 CPU1: shutdown
  2038. <7>[ 5231.691478] c0 s5p_ehci_cpu_notify: set ehci irq to cpu0
  2039. <5>[ 5231.692181] c0 CPU3: shutdown
  2040. <0>[ 5231.692761] c0 Restarting system with command 'now'.
  2041. <0>[ 5231.692787] c0 pid = 1 name:init
  2042. <0>[ 5231.692829] c0 sec_reboot (104, now)
  2043. PMIC rev = PASS2(4)
  2044. BUCK1OUT(vdd_mif) = 0x06
  2045. BUCK3DVS1(vdd_int) = 0x28
  2046. [MMC] there are pending interrupts 0x00010000
  2047. cardtype: 0x00000007
  2048. SB_MMC_HS_52MHZ_1_8V_3V_IO
  2049. mmc->card_caps: 0x00000311
  2050. mmc->host_caps: 0x00000311
  2051. mmc_initialize: mmc->capacity = 30777344
  2052.  
  2053. Samsung S-Boot 4.0-2372379 for GT-I9300 (Jan 21 2014 - 19:31:06)
  2054.  
  2055. EXYNOS4412(EVT 1.1) / 1022MB / 15028MB / Rev 12 / I9300XXUGNA8 /(PKG_ID 0xe072008)
  2056.  
  2057. - read_bl1
  2058. pit_check_signature (PIT) valid.
  2059. initialize_ddi_data: usable! (1:0xa)
  2060. PARAM ENV VERSION: v1.0..
  2061. set_charger_current: chg curr(bf), in curr(17)
  2062. set_charger_state: buck(1), chg(1), reg(0x05)
  2063. microusb_get_attached_device: STATUS1:0x3f, 2:0x00
  2064. set_auto_current: ta_state(0), curr(1000)
  2065. init_fuelgauge: fuelgauge power ok
  2066. init_fuelgauge: not POR status
  2067. init_fuelgauge: is reset case, skip soc-cal.
  2068. get_table_soc: vcell(4182) is caculated to t-soc(93.796)
  2069. init_fuelgauge: start: vcell(4182), vfocv(4227), soc(92), table soc(93)
  2070. init_fuelgauge: finish: vcell(4182), vfocv(4227), soc(92), table soc(93)
  2071. init_microusb_ic: MUIC: CONTROL1:0x00
  2072. init_microusb_ic: MUIC: CONTROL1:0x00
  2073. init_microusb_ic: MUIC: CONTROL2:0x3b
  2074. init_microusb_ic: MUIC: CONTROL2:0x3b
  2075. PMIC_ID      = 0x02
  2076. PMIC_IRQSRC  = 0x00
  2077. PMIC_IRQ1    = 0x30
  2078. PMIC_IRQ2    = 0x00
  2079. PMIC_IRQ1M   = 0xff
  2080. PMIC_IRQ2M   = 0xff
  2081. PMIC_STATUS1 = 0x12
  2082. PMIC_STATUS2 = 0x00
  2083. PMIC_PWRON   = 0x01
  2084. PMIC_RTCINT  = 0x11
  2085. PMIC_RTCINTM = 0x3d
  2086. s5p_check_keypad: 0x0
  2087. s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
  2088. s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
  2089. s5p_check_download: 0
  2090. microusb_get_attached_device: STATUS1:0x3f, 2:0x00
  2091. check_pm_status: normal reset, do not enter LPM mode.
  2092. cmu_div:1, div:7, src_clk:800000000, pixel_clk:57153600
  2093. s5p_dsim_display_config : VIDEO MODE
  2094. a2, 60, 90,
  2095. <start_checksum:451>CHECKSUM_HEADER_SECTOR :4096
  2096. <start_checksum:453>offset:50, size:6296
  2097. <start_checksum:457>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:16
  2098. Not Need Movinand Checksum
  2099. Movinand Checksum Confirmation Pass
  2100. load_kernel: loading boot image from 81920..
  2101. Verify_Binary_Signature: failed.
  2102. pit_check_signature (BOOT) invalid.
  2103. Set invalid sign flag
  2104.  No need to update kernel type.
  2105. ATAG_CORE: 5 54410001 0 0 0
  2106. ATAG_MEM: 4 54410002 10000000 40000000
  2107. ATAG_MEM: 4 54410002 10000000 50000000
  2108. ATAG_MEM: 4 54410002 10000000 60000000
  2109. ATAG_MEM: 4 54410002 0FE00000 70000000
  2110. ATAG_SERIAL: 4 54410006 4df101c2 19786f2d
  2111. ATAG_INITRD2: 4 54420005 42000000 e3ecb
  2112. ATAG_REVISION: 3 54410007 c
  2113. ATAG_CMDLINE: 7f 54410009 'console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x100000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=96 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=144m oops=panic pmic_info=65 cordon=ea1608736039320ede19f31546db5fb3 connie=GT-I9300_OPEN_EUR_b7de3d6cb887e396845f8001f942c52a androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=I9300XXUGNA8 androidboot.serialno=4df101c219786f2d snd_soc_core.pmdown_time=1000'
  2114. ATAG_NONE: 0 0
  2115.  
  2116. Starting kernel at 0x40008000...
  2117.  
  2118. SWITCH_SEL(1)
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top