API tools faq
paste
nospamdan

paul2

nospamdan
Sep 5th, 2015
166
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 52.35 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
  2. [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
  3. [ 0.000000] [0: swapper: 0] Linux version 3.0.101-Candy5-g7ba07d8 (javelinanddart@Candymaker) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Jun 29 16:15:56 CDT 2015
  4. [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  6. [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
  7. [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
  8. [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
  9. [ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized
  10. [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
  12. [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
  13. [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  14. [ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c7c00000 (48000000 physical) for fb
  15. [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c8852000 s9920 r8192 d14656 u32768
  16. [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160
  17. [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache androidboot.selinux=permissive sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=dd0a632e androidboot.baseband=csfb
  18. [ 0.000000] [0: swapper: 0] (sec_dbg_setup)
  19. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  20. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  21. [ 0.000000] hw_rev_setup : HW rev value is intialized first
  22. [ 0.000000] HW rev value : 0xD
  23. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  26. [ 0.000000] allocated 4177920 bytes of page_cgroup
  27. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  28. [ 0.000000] Memory: 43MB 760MB 22MB = 825MB total
  29. [ 0.000000] Memory: 794972k/794972k available, 166564k reserved, 419840K highmem
  30. [ 0.000000] Virtual kernel memory layout:
  31. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  32. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  33. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  34. [ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)
  35. [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
  36. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  37. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  38. [ 0.000000] .init : 0xc0008000 - 0xc004c000 ( 272 kB)
  39. [ 0.000000] .text : 0xc0100000 - 0xc0b785ac (10722 kB)
  40. [ 0.000000] .data : 0xc0c00000 - 0xc0cf2ea8 ( 972 kB)
  41. [ 0.000000] .bss : 0xc0cf2ecc - 0xc1353be8 (6532 kB)
  42. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  43. [ 0.000000] Preemptible hierarchical RCU implementation.
  44. [ 0.000000] NR_IRQS:855
  45. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  46. [ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655)
  47. [ 0.150238] pid_max: default: 32768 minimum: 301
  48. [ 0.150573] Security Framework initialized
  49. [ 0.150604] SELinux: Initializing.
  50. [ 0.150848] Mount-cache hash table entries: 512
  51. [ 0.152191] Initializing cgroup subsys cpuacct
  52. [ 0.152313] Initializing cgroup subsys memory
  53. [ 0.152374] Initializing cgroup subsys freezer
  54. [ 0.152435] CPU: Testing write buffer coherency: ok
  55. [ 0.152801] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  56. [ 0.185363] CPU1: Booted secondary processor
  57. [ 0.195251] Brought up 2 CPUs
  58. [ 0.195281] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  59. [ 0.210296] print_constraints: dummy:
  60. [ 0.210418] rdev_init_debugfs: Error-Bad Function Input
  61. [ 0.210723] NET: Registered protocol family 16
  62. [ 0.210937] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  63. [ 0.213012] (sec_get_lpm_mode) 1a2b3c00
  64. [ 0.213043] (sec_get_lpm_mode) 0
  65. [ 0.213043] (sec_debug_init)
  66. [ 0.213073] (sec_debug_init) reset_reason : 0x1a2b3c00
  67. [ 0.213104] msm_rpm_init: RPM firmware 2.0.1115
  68. [ 0.213928] saw_probe: id=0, name=8901_s0
  69. [ 0.214385] saw_probe: id=1, name=8901_s1
  70. [ 0.216003] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  71. [ 0.216033] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  72. [ 0.216064] rcg_clk_handoff: sdc1_clk rate=48000000
  73. [ 0.216125] rcg_clk_handoff: dsi_byte_clk rate=1
  74. [ 0.216186] rcg_clk_handoff: mdp_clk rate=200000000
  75. [ 0.216308] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  76. [ 0.218322] Max ACPU freq: 1512000 KHz
  77. [ 0.223785] CPU0: 23 scaling frequencies supported.
  78. [ 0.223785] CPU1: 23 scaling frequencies supported.
  79. [ 0.224304] LTE_switch_init!
  80. [ 0.224365] LTE_switch_init end!
  81. [ 0.225830] pm8058_probe: PMIC revision: E3
  82. [ 0.227142] pm_gpio_probe: OK: base=173, ngpio=40
  83. [ 0.227355] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  84. [ 0.228698] pm8901_probe: PMIC REVISION = F4
  85. [ 0.229125] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  86. [ 0.243927] ram_console: got buffer at 77800000, size 100000
  87. [ 0.244079] ram_console: uncorrectable error in header
  88. [ 0.244079] ram_console: no valid data in buffer (sig = 0xc140c2c0)
  89. [ 0.253295] console [ram-1] enabled
  90. [ 0.254699] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  91. [ 0.255371] msm_snddev_init
  92. [ 0.255828] msm_snddev_init snd_devices_celox - config
  93. [ 0.266326] [TSP] Power Down S to discharge for unexpected leackage current
  94. [ 0.266876] [TKEY] tkey_device_init: 8901_lvs2 On
  95. [ 0.267456] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  96. [ 0.267608] brcm_wlan_init: start
  97. [ 0.267730] brcm_init_wlan_mem: WIFI MEM Allocated
  98. [ 0.286773] bio: create slab <bio-0> at 0
  99. [ 0.288208] ION heap vmalloc created
  100. [ 0.288360] ION heap mm created at 38800000 with size 3600000
  101. [ 0.288513] ION heap mm_fw created at 38600000 with size 200000
  102. [ 0.288635] ION heap mfc created at 3be00000 with size 2000
  103. [ 0.288818] ION heap sf created at 78f00000 with size 4000000
  104. [ 0.288909] ION heap camera_preview created at 7cf00000 with size 1200000
  105. [ 0.289093] ION heap wb created at 7e100000 with size 1400000
  106. [ 0.289184] ION heap qsecom created at 7f500000 with size 600000
  107. [ 0.289367] ION heap audio created at 7fb00000 with size 4cf000
  108. [ 0.289642] pmic8058_pwm_probe: OK
  109. [ 0.290374] SCSI subsystem initialized
  110. [ 0.290649] usbcore: registered new interface driver usbfs
  111. [ 0.290771] usbcore: registered new interface driver hub
  112. [ 0.290985] usbcore: registered new device driver usb
  113. [ 0.291473] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  114. [ 0.291778] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  115. [ 0.292083] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  116. [ 0.292327] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  117. [ 0.292694] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  118. [ 0.292938] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  119. [ 0.293243] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  120. [ 0.293640] Advanced Linux Sound Architecture Driver Version 1.0.24.
  121. [ 0.294250] Bluetooth: Core ver 2.16
  122. [ 0.294372] NET: Registered protocol family 31
  123. [ 0.294525] Bluetooth: HCI device and connection manager initialized
  124. [ 0.294586] Bluetooth: HCI socket layer initialized
  125. [ 0.294738] Bluetooth: L2CAP socket layer initialized
  126. [ 0.294982] Bluetooth: SCO socket layer initialized
  127. [ 0.295532] cfg80211: Calling CRDA to update world regulatory domain
  128. [ 0.295867] Switching to clocksource gp_timer
  129. [ 0.314727] NET: Registered protocol family 2
  130. [ 0.314971] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  131. [ 0.315368] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  132. [ 0.316314] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  133. [ 0.317382] TCP: Hash tables configured (established 65536 bind 65536)
  134. [ 0.317474] TCP reno registered
  135. [ 0.317565] UDP hash table entries: 256 (order: 1, 12288 bytes)
  136. [ 0.317718] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  137. [ 0.318267] NET: Registered protocol family 1
  138. [ 0.318603] RPC: Registered named UNIX socket transport module.
  139. [ 0.318695] RPC: Registered udp transport module.
  140. [ 0.318847] RPC: Registered tcp transport module.
  141. [ 0.318908] RPC: Registered tcp NFSv4.1 backchannel transport module.
  142. [ 0.319244] Trying to unpack rootfs image as initramfs...
  143. [ 0.518005] Freeing initrd memory: 4404K
  144. [ 0.518463] PMU: registered new PMU device of type 0
  145. [ 0.518737] PMU: registered new PMU device of type 1
  146. [ 0.519256] ETM/ETB intialized.
  147. [ 0.519470] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  148. [ 0.519989] pil_modem pil_modem: using secure boot
  149. [ 0.520294] sdio_al:SDIO-AL SW version 1.30
  150. [ 0.523284] smd_channel_probe_worker: allocation table not initialized
  151. [ 0.529571] msm_dsps driver version 3.03.
  152. [ 0.535461] lpa_if_init: lpa_if_ptr 0xde9e0e00 buf_vir 0xffdf0000 buf_phy 0x5e5c0000 buf_zise 65536
  153. [ 0.536407] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  154. [ 0.538024] sec_switch_probe enter sec_switch_probe
  155. [ 0.538818] charm_modem_probe: Registering charm modem
  156. [ 0.541168] msm_rpm_log_probe: OK
  157. [ 0.541381] [BT] bcm4330_bluetooth_init
  158. [ 0.541870] [BT] bcm4330_bluetooth_probe
  159. [ 0.542297] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  160. [ 0.542388] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  161. [ 0.592285] sec_log_save_old: saved old log at 262144@de200000
  162. [ 0.596710] sec_getlog_supply_kloginfo: 0xc112af38
  163. [ 0.596954] audit: initializing netlink socket (disabled)
  164. [ 0.597167] type=2000 audit(0.570:1): initialized
  165. [ 0.682617] highmem bounce pool size: 64 pages
  166. [ 0.682891] ashmem: initialized
  167. [ 0.688842] exFAT: Core Version 1.2.4
  168. [ 0.688934] exFAT: FS Version 1.2.4
  169. [ 0.690765] NTFS driver 2.1.30 [Flags: R/W].
  170. [ 0.691223] fuse init (API version 7.16)
  171. [ 0.691894] msgmni has been set to 741
  172. [ 0.692016] SELinux: Registering netfilter hooks
  173. [ 0.693817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  174. [ 0.693939] io scheduler noop registered
  175. [ 0.694091] io scheduler deadline registered (default)
  176. [ 0.694183] io scheduler row registered
  177. [ 0.694335] io scheduler cfq registered
  178. [ 0.696899] mdp4_csc_config: Block type 10 isn't supported by CSC.
  179. [ 0.696990] mdp4_csc_config: Block type 8 isn't supported by CSC.
  180. [ 0.701202] ld9040 start lcdc_ld9040_panel_init
  181. [ 0.701385] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  182. [ 0.701538] ld9040 msm_fb_add_device START
  183. [ 0.701629] setting pdata->panel_info.fb_num to 3. type: 0
  184. [ 0.701812] msm_fb_add_device: msm_fb_device_alloc failed!
  185. [ 0.701904] ld9040 msm_fb_add_device end
  186. [ 0.702484] ld9040 platform_driver_register(&this_driver) is done
  187. [ 0.702575] ld9040 LDI : EA8868, pixelclock 27400000
  188. [ 0.702972] setting pdata->panel_info.fb_num to 3. type: 3
  189. [ 0.705810] mdp4_lcdc_vsync_init: ndx=0
  190. [ 0.708221] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  191. [ 0.708404] is_lpcharging_state: is_lpm_boot:0
  192. [ 0.708496] pm_runtime: fail to wake up
  193. [ 0.708648] [kmj] lcdc_LD9040_panel_power:enable:1
  194. [ 0.709808] ld9040 lcdc_ld9040_panel_on + (0,0,0)
  195. [ 0.709991] ld9040 : lcdc_config_gpios [1]
  196. [ 0.710083] ld9040 start spi_init
  197. [ 0.710174] ld9040 clk : 103, cs : 104, sdi : 106
  198. [ 0.710327] ld9040 start ld9040_disp_powerup
  199. [ 0.766204] ld9040 start ld9040_disp_on - HW Rev: 13
  200. [ 0.896911] ld9040 ld9040_read_lcd_id: a1 3 22
  201. [ 0.897064] ld9040 lcd EA8868 M3
  202. [ 0.960510] ld9040 ACL_cutoff_set Percentage : 40!!
  203. [ 0.961975] ld9040 ea8868_gamma_ctl 18 18
  204. [ 0.962158] ld9040 lcdc_ld9040_panel_on - (1,1,1)
  205. [ 0.963684] mdp4_csc_config: Block type 10 isn't supported by CSC.
  206. [ 0.963867] mdp4_csc_config: Block type 8 isn't supported by CSC.
  207. [ 0.967041] load_565rle_image: Can not open /initlogo.rle
  208. [ 0.967559] Registered led device: lcd-backlight
  209. [ 0.967681] mdp4_lcdc_vsync_init: ndx=0
  210. [ 0.967864] sec_getlog_supply_fbinfo: 0x48000000 480 800 32 2
  211. [ 0.967987] ld9040 platform_device_register(&this_device) is done
  212. [ 0.968566] hdmi_msm hdmi_msm.0: probe
  213. [ 0.969177] hdmi_msm hdmi_msm.1: probe
  214. [ 0.969299] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  215. [ 0.969573] setting pdata->panel_info.fb_num to 1. type: 7
  216. [ 0.970367] mdp4_dtv_vsync_init: ndx=0
  217. [ 0.972534] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  218. [ 0.972930] mdp4_dtv_vsync_init: ndx=0
  219. [ 0.973205] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de2bc008
  220. [ 0.973327] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  221. [ 0.973510] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  222. [ 0.973846] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  223. [ 0.974975]
  224. [ 0.974975] msm_vidc_enc: Inside vid_enc_init()
  225. [ 0.975433]
  226. [ 0.975433] msm_vidc_enc: Inside vid_enc_vcd_init()
  227. [ 0.975677] is_lpcharging_state: is_lpm_boot:0
  228. [ 0.975982] mhl_v2, Board : get_mhl_int_irq, rev:13
  229. [ 0.976287] create mhl sysfile
  230. [ 0.976837] input: sii9234_rcp as /devices/virtual/input/input0
  231. [ 0.977661] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  232. [ 0.978179] msm_serial_hs module loaded
  233. [ 0.978332] msm_serial_hsl: detected port #1
  234. [ 0.978576] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  235. [ 0.978851] msm_serial_hsl: detected port #0
  236. [ 0.979095] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  237. [ 0.979248] msm_serial_hsl: console setup on port #0
  238. [ 2.358917] console [ttyHSL0] enabled
  239. [ 2.362854] msm_serial_hsl: driver initialized
  240. [ 2.367950] msm_rotator_probe: rotator_hw_revision=1
  241. [ 2.377716] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  242. [ 2.385437] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  243. [ 2.392852] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  244. [ 2.405364] brd: module loaded
  245. [ 2.410186] loop: module loaded
  246. [ 2.412719] is_lpcharging_state: is_lpm_boot:0
  247. [ 2.416961] ak8975 probe start!
  248. [ 2.420989] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
  249. [ 2.428497] ak8975 probe success!
  250. [ 2.430969] is_lpcharging_state: is_lpm_boot:0
  251. [ 2.435363] k3dh probe start!!
  252. [ 2.438415] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
  253. [ 2.446166] k3dh probe success!!
  254. [ 2.449340] sec_jack:sec_jack_probe : Registering jack driver
  255. [ 2.455078] input: sec_jack as /devices/virtual/input/input1
  256. [ 2.461334] pm8xxx_upl_probe: OK
  257. [ 2.464691] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  258. [ 2.471618] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  259. [ 2.476562] THNAK YOU!!
  260. [ 2.478698] vibrator I2C attach success!!!
  261. [ 2.482727] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  262. [ 2.509155] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  263. [ 2.514221] is_lpcharging_state: is_lpm_boot:0
  264. [ 2.517883] a2220_init
  265. [ 2.520294] i2c-core: driver [audience_a2220] using legacy suspend method
  266. [ 2.526977] i2c-core: driver [audience_a2220] using legacy resume method
  267. [ 2.533721] level device init
  268. [ 2.541534] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
  269. [ 2.547546] audience_a2220 :a2220_ioctl: creating thread..
  270. [ 2.553039] init_a2220 -
  271. [ 2.553039] audience_a2220 :a2220_init_thread
  272. [ 2.559936] adie_codec_register_codec_operations: codec type 1
  273. [ 2.566284] Loading pn544 driver
  274. [ 2.568969] pn544_probe : IRQ num 628
  275. [ 2.572662] pn544_probe : requesting IRQ 628
  276. [ 2.577545] SCSI Media Changer driver v0.25
  277. [ 2.581451] PPP generic driver version 2.4.2
  278. [ 2.585449] PPP Deflate Compression module registered
  279. [ 2.590454] PPP BSD Compression module registered
  280. [ 2.597412] PPP MPPE Compression module registered
  281. [ 2.601318] NET: Registered protocol family 24
  282. [ 2.605682] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  283. [ 2.615417] CSLIP: code copyright 1989 Regents of the University of California.
  284. [ 2.623046] tun: Universal TUN/TAP device driver, 1.6
  285. [ 2.627746] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  286. [ 2.634582] smsc911x: Driver version 2008-10-21
  287. [ 2.638671] usbcore: registered new interface driver asix
  288. [ 2.643737] usbcore: registered new interface driver cdc_ether
  289. [ 2.649658] usbcore: registered new interface driver net1080
  290. [ 2.653228] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
  291. [ 2.661987] usbcore: registered new interface driver cdc_subset
  292. [ 2.667816] usbcore: registered new interface driver zaurus
  293. [ 2.673400] cdc_ncm: 04-Aug-2011
  294. [ 2.676544] usbcore: registered new interface driver cdc_ncm
  295. [ 2.682250] rmnet_init: SMD devices[8]
  296. [ 2.690216] rmnet_init: SDIO devices[8]
  297. [ 2.695739] msm_hsusb_smb328a_vbus_power attached 0
  298. [ 2.701843] msm_otg msm_otg: success to host_notify_dev_register
  299. [ 2.706817] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
  300. [ 2.713684] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
  301. [ 2.713867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  302. [ 2.714172] host driver registered w/ tranceiver
  303. [ 2.714416] usbcore: registered new interface driver cdc_acm
  304. [ 2.714447] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  305. [ 2.714508] usbcore: registered new interface driver usblp
  306. [ 2.714538] Initializing USB Mass Storage driver...
  307. [ 2.714630] usbcore: registered new interface driver usb-storage
  308. [ 2.714660] USB Mass Storage support registered.
  309. [ 2.714721] usbcore: registered new interface driver ums-alauda
  310. [ 2.714782] usbcore: registered new interface driver ums-cypress
  311. [ 2.714843] usbcore: registered new interface driver ums-datafab
  312. [ 2.714904] usbcore: registered new interface driver ums-freecom
  313. [ 2.714965] usbcore: registered new interface driver ums-isd200
  314. [ 2.715057] usbcore: registered new interface driver ums-jumpshot
  315. [ 2.715118] usbcore: registered new interface driver ums-karma
  316. [ 2.715179] usbcore: registered new interface driver ums-onetouch
  317. [ 2.715240] usbcore: registered new interface driver ums-sddr09
  318. [ 2.715301] usbcore: registered new interface driver ums-sddr55
  319. [ 2.715362] usbcore: registered new interface driver ums-usbat
  320. [ 2.715454] usbcore: registered new interface driver usb_ehset_test
  321. [ 2.715728] peripheral driver registered w/ tranceiver
  322. [ 2.715789] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  323. [ 2.849243] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
  324. [ 2.855010] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
  325. [ 2.855041] android_usb gadget: Mass Storage Function, version: 2009/09/11
  326. [ 2.855072] android_usb gadget: Number of LUNs=2
  327. [ 2.855102] lun0: LUN: removable file: (no medium)
  328. [ 2.855133] lun1: LUN: removable file: (no medium)
  329. [ 2.855377] android_usb gadget: android_usb ready
  330. [ 2.857147] DIAG registered SDIO device
  331. [ 2.857330] diagchar initialized now
  332. [ 2.857513] mousedev: PS/2 mouse device common for all mice
  333. [ 2.858825] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  334. [ 2.859313] is_lpcharging_state: is_lpm_boot:0
  335. [ 2.859375] [TSP] mxt224_probe
  336. [ 2.859527] input: sec_touchscreen as /devices/virtual/input/input3
  337. [ 2.859649] mxt224_power_on: enter
  338. [ 2.860076] [TSP POWER ON L1 3.3 enable
  339. [ 2.860473] [TSP POWER ON L4 1.8 enable
  340. [ 2.860504] mxt224_power_on: exit
  341. [ 2.916778] mxt224_power_on is finished
  342. [ 2.936798] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  343. [ 2.936859] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  344. [ 2.937225] msm_otg_suspend: usb in low power mode
  345. [ 2.958465] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  346. [ 2.958526] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
  347. [ 2.973663] a2220_bootup_init: starting to load image (2459 passes)...
  348. [ 2.982818] [TSP] TSP chip is MXT224-E
  349. [ 2.986206] [TSP]user_info_value is 0
  350. [ 3.076782] [TSP] ta_status is 0
  351. [ 3.078887] [TSP] mxt224_ta_probe
  352. [ 3.090972] [TSP]TA_probe MXT224E T48 Byte2 is 114
  353. [ 3.097045] [TSP]calibration success!!!
  354. [ 3.100433] [TSP] mxt224_probe e
  355. [ 3.103363] [TSP] Calibration End!!!!!!
  356. [ 3.103790] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  357. [ 3.103942] [sweep2wake]: set device pmic8xxx_pwrkey
  358. [ 3.105804] using rtc device, pm8xxx_rtc, for alarms
  359. [ 3.105834] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  360. [ 3.106292] i2c /dev entries driver
  361. [ 3.107879] is_lpcharging_state: is_lpm_boot:0
  362. [ 3.107910] yda165:yda165_init
  363. [ 3.107971] yda165:yda165_probe
  364. [ 3.108001] yda165:yda165_probe
  365. [ 3.108032] yda165_probe: OK
  366. [ 3.108154] yda165:load_ampgain completed
  367. [ 3.108276] is_lpcharging_state: is_lpm_boot:0
  368. [ 3.108489] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
  369. [ 3.108764] input: proximity_sensor as /devices/virtual/input/input5
  370. [ 3.108978] opt_i2c_probe(839):
  371. [ 3.109008] opt_i2c_probe, 840 : start!!!
  372. [ 3.109008] GP2A opt i2c attach success!!!
  373. [ 3.109039] GP2A opt i2c attach success!!!
  374. [ 3.109069] opt_i2c_probe, 859 : end!!!
  375. [ 3.109161] opt_i2c_client : (0xdea1e000)
  376. [ 3.109893] opt_i2c_write(497): : 0x4, 0x2
  377. [ 3.109924] gp2a_opt_probe is OK!!
  378. [ 3.110534] is_lpcharging_state: is_lpm_boot:0
  379. [ 3.111480] input: light_sensor as /devices/virtual/input/input6
  380. [ 3.111999] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
  381. [ 3.114776] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
  382. [ 3.114990] i2c-core: driver [fsa9480] using legacy resume method
  383. [ 3.115051] is_lpcharging_state: is_lpm_boot:0
  384. [ 3.115112] [GYRO] k3g_probe start!
  385. [ 3.115142] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  386. [ 3.115600] input: gyro_sensor as /devices/virtual/input/input8
  387. [ 3.116973] input: orientation_sensor as /devices/virtual/input/input9
  388. [ 3.117248] lirc_dev: IR Remote Control driver registered, major 239
  389. [ 3.117279] IR NEC protocol handler initialized
  390. [ 3.117309] IR RC5(x) protocol handler initialized
  391. [ 3.117340] IR RC6 protocol handler initialized
  392. [ 3.117340] IR JVC protocol handler initialized
  393. [ 3.117370] IR Sony protocol handler initialized
  394. [ 3.117401] IR RC5 (streamzap) protocol handler initialized
  395. [ 3.117431] IR LIRC bridge handler initialized
  396. [ 3.117523] Linux video capture interface: v2.00
  397. [ 3.117645] usbcore: registered new interface driver uvcvideo
  398. [ 3.117706] USB Video Class driver (v1.1.0)
  399. [ 3.118560] is_lpcharging_state: is_lpm_boot:0
  400. [ 3.118713] ############# M5MO probe ##############
  401. [ 3.118835] [M5MO] m5mo_sensor_probe : E
  402. [ 3.118865] [M5MO] m5mo_i2c_init : E
  403. [ 3.118896] [M5MO] m5mo_i2c_probe : E
  404. [ 3.118927] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  405. [ 3.118957]
  406. [ 3.119842] is_lpcharging_state: is_lpm_boot:0
  407. [ 3.119995] ############# S5K5BAFX probe ##############
  408. [ 3.120391] [5BAFX] s5k5bafx_sensor_probe : E
  409. [ 3.120422] [5BAFX] s5k5bafx_i2c_init : E
  410. [ 3.120483] [5BAFX] s5k5bafx_i2c_probe : E
  411. [ 3.120513] [5BAFX] s5k5bafx_i2c_probe : X
  412. [ 3.120605] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
  413. [ 3.121429] [Torch] ledflash_init
  414. [ 3.121673] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  415. [ 3.122070] max17040_probe: MAX17043 driver Loading!
  416. [ 3.122100] max17040_get_version :
  417. [ 3.122924] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  418. [ 3.123748] max17040_get_rcomp : current rcomp = 0xc71f(199)
  419. [ 3.124969] max17040_get_rcomp : current rcomp = 0xc71f(199)
  420. [ 3.128601] i2c-core: driver [max17040] using legacy suspend method
  421. [ 3.128631] i2c-core: driver [max17040] using legacy resume method
  422. [ 3.128753] smb328a_probe: SMB328A driver Loading!
  423. [ 3.128784] is_lpcharging_state: is_lpm_boot:0
  424. [ 3.132110] i2c-core: driver [smb328a] using legacy suspend method
  425. [ 3.132141] i2c-core: driver [smb328a] using legacy resume method
  426. [ 3.132751] msm_adc successfully registered
  427. [ 3.133422] tsens_tm_probe: OK
  428. [ 3.133697] pm8xxx_init_adc: adc_channel_open() failed.
  429. [ 3.133728] pm8xxx_tm_probe: Unable to initialize adc
  430. [ 3.133758] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  431. [ 3.134155] pm8xxx_tm_probe: OK
  432. [ 3.134796] device-mapper: uevent: version 1.0.3
  433. [ 3.135101] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  434. [ 3.135345] Bluetooth: HCI UART driver ver 2.2
  435. [ 3.135375] Bluetooth: HCI H4 protocol initialized
  436. [ 3.135406] Bluetooth: HCI_IBS protocol initialized
  437. [ 3.135437] Bluetooth: BlueSleep Mode Driver Ver 1.1
  438. [ 3.136108] cpuidle: using governor ladder
  439. [ 3.136138] cpuidle: using governor menu
  440. [ 3.136779] mmc0: mci-version: 0
  441. [ 3.136871] mmc0: No card detect facilities available
  442. [ 3.137390] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  443. [ 3.137451] mmc0: 8 bit data mode enabled
  444. [ 3.137481] mmc0: 4 bit data mode disabled
  445. [ 3.137481] mmc0: polling status mode disabled
  446. [ 3.137512] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  447. [ 3.137542] mmc0: Slot eject status = 0
  448. [ 3.137573] mmc0: Power save feature enable = 1
  449. [ 3.137603] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d860000
  450. [ 3.137634] mmc0: DM cmd busaddr 0x5d860000, cmdptr busaddr 0x5d877f40
  451. [ 3.138214] mmc1: mci-version: 0
  452. [ 3.138916] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  453. [ 3.138946] mmc1: 8 bit data mode enabled
  454. [ 3.138977] mmc1: 4 bit data mode disabled
  455. [ 3.139007] mmc1: polling status mode disabled
  456. [ 3.139038] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  457. [ 3.139068] mmc1: Slot eject status = 0
  458. [ 3.139099] mmc1: Power save feature enable = 1
  459. [ 3.139129] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d880000
  460. [ 3.139160] mmc1: DM cmd busaddr 0x5d880000, cmdptr busaddr 0x5d897f40
  461. [ 3.139648] mmc2: mci-version: 0
  462. [ 3.140411] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  463. [ 3.140441] mmc2: 8 bit data mode disabled
  464. [ 3.140472] mmc2: 4 bit data mode enabled
  465. [ 3.140472] mmc2: polling status mode disabled
  466. [ 3.140502] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  467. [ 3.140533] mmc2: Slot eject status = 0
  468. [ 3.140563] mmc2: Power save feature enable = 1
  469. [ 3.140594] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d8a0000
  470. [ 3.140686] mmc2: DM cmd busaddr 0x5d8a0000, cmdptr busaddr 0x5d8b7f40
  471. [ 3.141174] mmc3: mci-version: 0
  472. [ 3.141296] mmc3: No card detect facilities available
  473. [ 3.141723] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  474. [ 3.141784] mmc3: 8 bit data mode disabled
  475. [ 3.141784] mmc3: 4 bit data mode enabled
  476. [ 3.141815] mmc3: polling status mode disabled
  477. [ 3.141845] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  478. [ 3.141906] mmc3: Slot eject status = 0
  479. [ 3.141906] mmc3: Power save feature enable = 1
  480. [ 3.141937] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d8c0000
  481. [ 3.141967] mmc3: DM cmd busaddr 0x5d8c0000, cmdptr busaddr 0x5d8d7f40
  482. [ 3.142456] mmc4: mci-version: 0
  483. [ 3.143127] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  484. [ 3.143157] mmc4: 8 bit data mode disabled
  485. [ 3.143188] mmc4: 4 bit data mode enabled
  486. [ 3.143218] mmc4: polling status mode disabled
  487. [ 3.143249] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  488. [ 3.143280] mmc4: Slot eject status = 0
  489. [ 3.143280] mmc4: Power save feature enable = 1
  490. [ 3.143310] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d8e0000
  491. [ 3.143341] mmc4: DM cmd busaddr 0x5d8e0000, cmdptr busaddr 0x5d8f7f40
  492. [ 3.144226] Registered led device: camera:flash0
  493. [ 3.144378] Registered led device: camera:flash1
  494. [ 3.146484] usbcore: registered new interface driver usbhid
  495. [ 3.146514] usbhid: USB HID core driver
  496. [ 3.147064] logger: created 512K log 'log_main'
  497. [ 3.147216] logger: created 256K log 'log_events'
  498. [ 3.147308] logger: created 512K log 'log_radio'
  499. [ 3.147430] logger: created 256K log 'log_system'
  500. [ 3.147460] sec_getlog_supply_loggerinfo: 0xc11c6fc0 0xc1246fc0 0xc12c6fc0 0xc1306fc0
  501. [ 3.148681] zram: Created 2 device(s) ...
  502. [ 3.149108] usbcore: registered new interface driver snd-usb-audio
  503. [ 3.150360] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  504. [ 3.150695] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  505. [ 3.151031] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  506. [ 3.356689] param_sec_operation: filp_open failed. (-2)
  507. [ 3.356719] sec_open_param PARAM OPEN FAIL
  508. [ 3.356750] sec_switch_init_work error value = 3
  509. [ 3.867401] [TSP] Clearing unused slots
  510. [ 3.871673] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  511. [ 3.878326] [TSP] Calibration End!!!!!!
  512. [ 3.878356] ALSA device list:
  513. [ 3.878417] #0: msm-audio
  514. [ 3.878997] oprofile: using arm/armv7-scorpionmp
  515. [ 3.879150] GACT probability NOT on
  516. [ 3.879180] Mirror/redirect action on
  517. [ 3.879211] u32 classifier
  518. [ 3.879241] Actions configured
  519. [ 3.879272] Netfilter messages via NETLINK v0.30.
  520. [ 3.879364] nf_conntrack version 0.5.0 (12490 buckets, 49960 max)
  521. [ 3.879852] ctnetlink v0.93: registering with nfnetlink.
  522. [ 3.879913] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  523. [ 3.879943] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  524. [ 3.880432] xt_time: kernel timezone is -0000
  525. [ 3.880645] ip_tables: (C) 2000-2006 Netfilter Core Team
  526. [ 3.880889] arp_tables: (C) 2002 David S. Miller
  527. [ 3.880981] TCP cubic registered
  528. [ 3.881011] Initializing XFRM netlink socket
  529. [ 3.881561] NET: Registered protocol family 10
  530. [ 3.883422] Mobile IPv6
  531. [ 3.883483] ip6_tables: (C) 2000-2006 Netfilter Core Team
  532. [ 3.883636] IPv6 over IPv4 tunneling driver
  533. [ 3.884582] NET: Registered protocol family 17
  534. [ 3.884643] NET: Registered protocol family 15
  535. [ 3.884857] Bluetooth: RFCOMM TTY layer initialized
  536. [ 3.884887] Bluetooth: RFCOMM socket layer initialized
  537. [ 3.884918] Bluetooth: RFCOMM ver 1.11
  538. [ 3.884948] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  539. [ 3.884979] Bluetooth: BNEP filters: protocol multicast
  540. [ 3.885009] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  541. [ 3.885162] NET: Registered protocol family 35
  542. [ 3.885314] Registering the dns_resolver key type
  543. [ 3.885375] VFP support v0.3:
  544. [ 4.022644] [TSP] Clearing unused slots
  545. [ 4.022949] implementor 51 architecture 64 part 2d variant 0 rev 0
  546. [ 4.022979] Registering SWP/SWPB emulation handler
  547. [ 4.034545] clock_late_init() disabled 187 unused clocks
  548. [ 4.050292] MSM Watchdog Initialized
  549. [ 4.058074] set_dload_mode <0> ( C0016B04 )
  550. [ 4.082397] [TKEY] touchkey_init START
  551. [ 4.090362] is_lpcharging_state: is_lpm_boot:0
  552. [ 4.109802] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
  553. [ 4.116821] [TKEY] sec i2c_touchkey_probe
  554. [ 4.120819] input: sec_touchkey as /devices/virtual/input/input10
  555. [ 4.127105] [TKEY] enter touchkey_auto_calibration
  556. [ 4.153472] mmc0: new high speed MMC card at address 0001
  557. [ 4.161590] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  558. [ 4.169097] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  559. [ 4.174194] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  560. [ 4.184295] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  561. [ 4.185394] [TKEY] after touchkey_auto_calibration result = 1
  562. [ 4.185516] [TKEY] touchkey_init END
  563. [ 4.204467] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-09-05 15:59:23 UTC (1441468763)
  564. [ 4.213348] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  565. [ 4.220764] sec_bat_get_lpcharging_state: LP charging:0
  566. [ 4.226104] mmcblk0boot1: unknown partition table
  567. [ 4.231689] [fg] p:8778, s1:93, s2:100, v:3987500, t:0
  568. [ 4.236511] mmcblk0boot0: unknown partition table
  569. [ 4.236541] sec_bat_measure_work: adc work already on a queue
  570. [ 4.246704] Freeing init memory: 272K
  571. [ 4.255798] SELinux: 2048 avtab hash slots, 8137 rules.
  572. [ 4.263427] SELinux: 2048 avtab hash slots, 8137 rules.
  573. [ 4.267822] pmic8058_xoadc:The offset for AMUX calibrationwas -375
  574. [ 4.273925] SELinux: 1 users, 2 roles, 644 types, 0 bools, 1 sens, 1024 cats
  575. [ 4.280975] SELinux: 86 classes, 8137 rules
  576. [ 4.286895] SELinux: Completing initialization.
  577. [ 4.290588] SELinux: Setting up existing superblocks.
  578. [ 4.295745] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  579. [ 4.302947] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  580. [ 4.311126] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  581. [ 4.317901] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  582. [ 4.324920] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  583. [ 4.332092] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  584. [ 4.348785] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  585. [ 4.354827] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  586. [ 4.361633] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  587. [ 4.362060] param_sec_operation: filp_open failed. (-2)
  588. [ 4.362091] sec_open_param PARAM OPEN FAIL
  589. [ 4.362121] sec_switch_init_work error value = 3
  590. [ 4.384704] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  591. [ 4.391998] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  592. [ 4.399993] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  593. [ 4.407043] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  594. [ 4.456787] sec_jack:sec_jack_det_irq_handler : ready = 1.
  595. [ 4.461425] sec_jack: ear micbias off
  596. [ 4.675842] gpio_request: gpio-251 (SD_WP_Switch) status -22
  597. [ 4.680633] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  598. [ 4.685272] type=1403 audit(1441468763.980:2): policy loaded auid=4294967295 ses=4294967295
  599. [ 4.694702] mmc2: host does not support reading read-only switch. assuming write-enable.
  600. [ 4.704956] mmc2: new high speed SDXC card at address e624
  601. [ 4.710754] mmcblk1: mmc2:e624 SU64G 59.4 GiB
  602. [ 4.717559] mmcblk1: p1 p2
  603. [ 4.812622] sec_bat_get_lpcharging_state: LP charging:0
  604. [ 4.824066] init: invalid gid 'qcom_oncrpc'
  605. [ 4.824707] healthd: wakealarm_init: timerfd_create failed
  606. [ 4.828552] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  607. [ 5.000976] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  608. [ 5.010498] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  609. [ 5.019989] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  610. [ 5.028167] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  611. [ 5.037963] healthd: battery l=93 v=3987 t=65.0 h=2 st=3 chg=
  612. [ 5.357238] type=1400 audit(1441468764.660:3): avc: denied { read } for pid=87 comm="kworker/0:2" name="mmcblk0p12" dev=tmpfs ino=5197 scontext=u:r:kernel:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
  613. [ 5.375732] sec_bat_measure_work: adc work already on a queue
  614. [ 5.383697] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  615. [ 5.383728] type=1400 audit(1441468764.690:4): avc: denied { open } for pid=87 comm="kworker/0:2" name="mmcblk0p12" dev=tmpfs ino=5197 scontext=u:r:kernel:s0 tcontext=u:object_r:mmc_block_device:s0 tclass=blk_file
  616. [ 5.411041] healthd: battery l=93 v=3996 t=26.2 h=2 st=3 chg=
  617. [ 5.419830] sec_switch_init_work value = 1
  618. [ 5.420562] android_usb: already disabled
  619. [ 5.421325] init: Unable to open persistent property directory /data/property errno: 2
  620. [ 5.425231] init: Warning! Service recovery needs a SELinux domain defined; please fix!
  621. [ 5.443969] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
  622. [ 5.449676] type=1400 audit(1441468764.750:5): avc: denied { write } for pid=121 comm="toolbox" name="enforce" dev=selinuxfs ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file
  623. [ 5.458465] fsa9480_manual_switching(0)
  624. [ 5.471160] set_freq_limit: 0x8 0, min 384000, max 1242000
  625. [ 5.485595] android_usb: already disabled
  626. [ 5.486358] usb: enable_store f:mtp
  627. [ 5.486358] usb: enable_store f:adb
  628. [ 5.504943] adb_open
  629. [ 5.507385] mtp_bind_config
  630. [ 5.507476] adb_bind_config
  631. [ 5.537170] ld9040 get_gamma_value_from_bl >>> bl_value:250, gamma_value: 22.
  632. [ 5.537200] ld9040 brightness!!! bl_level=255, tune_level=22 curr=18
  633. [ 5.560272] ld9040 ea8868_gamma_ctl 22 22
  634. [ 5.747222] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 15
  635. [ 5.754425] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 14
  636. [ 5.762145] EXT4-fs (mmcblk0p26): ext4_orphan_cleanup: deleting unreferenced inode 21
  637. [ 5.769897] EXT4-fs (mmcblk0p26): 3 orphan inodes deleted
  638. [ 5.775238] EXT4-fs (mmcblk0p26): recovery complete
  639. [ 5.814605] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts:
  640. [ 5.821563] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
  641. [ 5.974029] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
  642. [ 5.980621] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
  643. [ 5.986602] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
  644. [ 6.017242] a2220_bootup_init: firmware loaded successfully
  645. [ 6.227569] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
  646. [ 6.233367] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
  647. [ 6.240478] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
  648. [ 6.247772] audience_a2220 :execute_cmdmsg : ...go to suspend first
  649. [ 6.253814] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
  650. [ 6.360839] healthd: battery l=93 v=4006 t=26.2 h=2 st=3 chg=
  651. [ 6.387268] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
  652. [ 6.393249] a2220_bootup_init: initialized!
  653. [ 6.397460] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
  654. [ 7.451782] healthd: battery l=93 v=4022 t=26.2 h=2 st=3 chg=
  655. [ 8.462524] healthd: battery l=93 v=4023 t=26.2 h=2 st=3 chg=
  656. [ 9.127319] fsa9480 5-0025: fsa9480_init_detect
  657. [ 9.132843] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  658. [ 9.817291] msmsdcc_runtime_suspend: Enter WIFI suspend
  659. [ 13.753631] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 114986
  660. [ 13.761383] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 362180
  661. [ 13.769226] EXT4-fs (mmcblk0p25): 2 orphan inodes deleted
  662. [ 13.774444] EXT4-fs (mmcblk0p25): recovery complete
  663. [ 13.832641] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  664. [ 13.839538] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  665. [ 13.948974] type=1400 audit(1441468773.258:6): avc: denied { create } for pid=122 comm="recovery" name="fstab" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  666. [ 13.963989] type=1400 audit(1441468773.268:7): avc: denied { write } for pid=122 comm="recovery" name="fstab" dev=rootfs ino=4432 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  667. [ 13.993927] SELinux: initialized (dev mmcblk0p28, type vfat), uses genfs_contexts
  668. [ 14.050079] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  669. [ 14.056884] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  670. [ 14.151306] EXT4-fs (mmcblk0p21): recovery complete
  671. [ 14.161651] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  672. [ 14.168548] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  673. [ 14.222076] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  674. [ 14.228942] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  675. [ 14.776092] type=1400 audit(1441468774.069:8): avc: denied { read } for pid=122 comm="recovery" name=".android_secure" dev=mmcblk0p28 ino=2 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
  676. [ 14.793334] type=1400 audit(1441468774.099:9): avc: denied { open } for pid=122 comm="recovery" name=".android_secure" dev=mmcblk0p28 ino=2 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
  677. [ 15.153533] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  678. [ 16.986389] type=1400 audit(1441468776.281:10): avc: denied { execute } for pid=122 comm="recovery" path="/dev/ashmem" dev=tmpfs ino=5329 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file
  679. [ 17.483459] type=1400 audit(1441468776.782:11): avc: denied { setattr } for pid=122 comm="recovery" name="postrecoveryboot.sh" dev=rootfs ino=2656 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  680. [ 17.596588] type=1400 audit(1441468776.892:12): avc: denied { read } for pid=122 comm="recovery" name=".twrps" dev=mmcblk0p28 ino=42 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  681. [ 17.613342] type=1400 audit(1441468776.922:13): avc: denied { open } for pid=122 comm="recovery" name=".twrps" dev=mmcblk0p28 ino=42 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  682. [ 17.630889] type=1400 audit(1441468776.942:14): avc: denied { getattr } for pid=122 comm="recovery" path="/sdcard/TWRP/.twrps" dev=mmcblk0p28 ino=42 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  683. [ 17.718414] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  684. [ 19.490356] adb_release
  685. [ 19.495269] android_usb: already disabled
  686. [ 19.498565] usb: enable_store f:adb
  687. [ 19.502624] type=1400 audit(1441468778.804:15): avc: denied { write } for pid=122 comm="recovery" name=".twrps" dev=mmcblk0p28 ino=42 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  688. [ 19.523956] adb_open
  689. [ 19.525207] adb_bind_config
  690. [ 19.528778] type=1400 audit(1441468778.834:16): avc: denied { setattr } for pid=122 comm="recovery" name=".twrps" dev=mmcblk0p28 ino=42 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  691. [ 46.389862] [TSP] ID-0,UD:1
  692. [ 46.406341] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  693. [ 46.411743] [VIBETONZ] ENABLE
  694. [ 46.415832] [TSP] t: 6, a: 0
  695. [ 46.458496] [TSP] ID-0,UD:0
  696. [ 46.499114] [VIBETONZ] DISABLE
  697. [ 46.759918] [TSP] ID-0,UD:1
  698. [ 46.762084] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  699. [ 46.780090] [VIBETONZ] ENABLE
  700. [ 46.791015] [TSP] t: 5, a: 0
  701. [ 46.793395] [TSP] calibration was good
  702. [ 46.798828] [TSP] Clearing unused slots
  703. [ 46.833435] [TSP] ID-0,UD:0
  704. [ 46.864685] [VIBETONZ] DISABLE
  705. [ 47.324096] [TSP] ID-0,UD:1
  706. [ 47.345397] [TSP] ID-0,UD:2
  707. [ 47.354187] [TSP] ID-0,UD:2
  708. [ 47.369323] [TSP] ID-0,UD:2
  709. [ 47.385162] [TSP] ID-0,UD:2
  710. [ 47.400299] [TSP] ID-0,UD:2
  711. [ 47.415374] [TSP] ID-0,UD:2
  712. [ 47.430480] [TSP] ID-0,UD:2
  713. [ 47.447021] [TSP] ID-0,UD:2
  714. [ 47.460510] [TSP] ID-0,UD:2
  715. [ 47.478057] [TSP] ID-0,UD:2
  716. [ 47.490692] [TSP] ID-0,UD:2
  717. [ 47.512207] [TSP] ID-0,UD:2
  718. [ 47.520782] [TSP] ID-0,UD:2
  719. [ 47.535919] [TSP] ID-0,UD:2
  720. [ 47.550933] [TSP] ID-0,UD:2
  721. [ 47.566040] [TSP] ID-0,UD:2
  722. [ 47.581878] [TSP] ID-0,UD:2
  723. [ 47.597015] [TSP] ID-0,UD:2
  724. [ 47.627105] [TSP] ID-0,UD:2
  725. [ 47.647583] [TSP] ID-0,UD:2
  726. [ 47.657073] [TSP] ID-0,UD:2
  727. [ 47.699523] [TSP] ID-0,UD:0
  728. [ 48.563262] healthd: battery l=93 v=4020 t=26.2 h=2 st=3 chg=
  729. [ 48.967254] [TSP] ID-0,UD:1
  730. [ 49.064483] [TSP] ID-0,UD:0
  731. [ 49.066711] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  732. [ 49.072631] [VIBETONZ] ENABLE
  733. [ 49.157989] [VIBETONZ] DISABLE
  734. [ 49.776794] [TSP] ID-0,UD:1
  735. [ 49.786499] [TSP] ID-0,UD:2
  736. [ 49.806915] [TSP] ID-0,UD:2
  737. [ 49.816558] [TSP] ID-0,UD:2
  738. [ 49.861389] [TSP] ID-0,UD:0
  739. [ 50.715515] [TSP] ID-0,UD:1
  740. [ 50.730529] [TSP] ID-0,UD:2
  741. [ 50.745605] [TSP] ID-0,UD:2
  742. [ 50.788146] [TSP] ID-0,UD:0
  743. [ 51.279022] [TSP] ID-0,UD:1
  744. [ 51.299896] [TSP] ID-0,UD:2
  745. [ 51.336944] [TSP] ID-0,UD:0
  746. [ 52.017272] [TSP] ID-0,UD:1
  747. [ 52.037689] [TSP] ID-0,UD:2
  748. [ 52.047271] [TSP] ID-0,UD:2
  749. [ 52.067718] [TSP] ID-0,UD:2
  750. [ 52.078063] [TSP] ID-0,UD:2
  751. [ 52.120513] [TSP] ID-0,UD:0
  752. [ 52.671417] [TSP] ID-0,UD:1
  753. [ 52.681091] [TSP] ID-0,UD:2
  754. [ 52.702514] [TSP] ID-0,UD:2
  755. [ 52.711791] [TSP] ID-0,UD:2
  756. [ 52.753540] [TSP] ID-0,UD:0
  757. [ 53.236053] [TSP] ID-0,UD:1
  758. [ 53.248138] [TSP] ID-0,UD:2
  759. [ 53.264648] [TSP] ID-0,UD:2
  760. [ 53.279815] [TSP] ID-0,UD:2
  761. [ 53.319122] [TSP] ID-0,UD:0
  762. [ 53.958587] [TSP] ID-0,UD:1
  763. [ 53.988800] [TSP] ID-0,UD:2
  764. [ 54.009094] [TSP] ID-0,UD:2
  765. [ 54.019165] [TSP] ID-0,UD:2
  766. [ 54.040069] [TSP] ID-0,UD:2
  767. [ 54.050140] [TSP] ID-0,UD:2
  768. [ 54.068420] [TSP] ID-0,UD:2
  769. [ 54.079895] [TSP] ID-0,UD:2
  770. [ 54.095062] [TSP] ID-0,UD:2
  771. [ 54.115447] [TSP] ID-0,UD:2
  772. [ 54.125122] [TSP] ID-0,UD:2
  773. [ 54.145568] [TSP] ID-0,UD:2
  774. [ 54.182495] [TSP] ID-0,UD:0
  775. [ 54.727172] [TSP] ID-0,UD:1
  776. [ 54.757324] [TSP] ID-0,UD:2
  777. [ 54.772369] [TSP] ID-0,UD:2
  778. [ 54.787384] [TSP] ID-0,UD:2
  779. [ 54.802551] [TSP] ID-0,UD:2
  780. [ 54.818511] [TSP] ID-0,UD:2
  781. [ 54.836883] [TSP] ID-0,UD:2
  782. [ 54.848663] [TSP] ID-0,UD:2
  783. [ 54.863830] [TSP] ID-0,UD:2
  784. [ 54.878814] [TSP] ID-0,UD:2
  785. [ 54.893951] [TSP] ID-0,UD:2
  786. [ 54.908966] [TSP] ID-0,UD:2
  787. [ 54.924102] [TSP] ID-0,UD:2
  788. [ 54.939331] [TSP] ID-0,UD:2
  789. [ 54.954193] [TSP] ID-0,UD:2
  790. [ 54.972015] [TSP] ID-0,UD:2
  791. [ 55.011596] [TSP] ID-0,UD:0
  792. [ 56.440826] [TSP] ID-0,UD:1
  793. [ 56.538024] [TSP] ID-0,UD:0
  794. [ 56.540527] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  795. [ 56.546142] [VIBETONZ] ENABLE
  796. [ 56.631561] [VIBETONZ] DISABLE
  797. [ 59.928680] [TSP] ID-0,UD:1
  798. [ 59.931457] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  799. [ 59.937286] [VIBETONZ] ENABLE
  800. [ 59.983886] [TSP] ID-0,UD:0
  801. [ 60.016906] [VIBETONZ] DISABLE
  802. [ 61.125885] [TSP] ID-0,UD:1
  803. [ 61.223327] [TSP] ID-0,UD:0
  804. [ 61.225555] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  805. [ 61.231536] [VIBETONZ] ENABLE
  806. [ 61.316772] [VIBETONZ] DISABLE
  807. [ 62.274200] [TSP] ID-0,UD:1
  808. [ 62.283843] [TSP] ID-0,UD:2
  809. [ 62.298858] [TSP] ID-0,UD:2
  810. [ 62.313964] [TSP] ID-0,UD:2
  811. [ 62.330230] [TSP] ID-0,UD:2
  812. [ 62.344055] [TSP] ID-0,UD:2
  813. [ 62.361877] [TSP] ID-0,UD:2
  814. [ 62.401489] [TSP] ID-0,UD:0
  815. [ 63.939361] [TSP] ID-0,UD:1
  816. [ 64.051971] [TSP] ID-0,UD:0
  817. [ 64.054290] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  818. [ 64.060119] [VIBETONZ] ENABLE
  819. [ 64.145385] [VIBETONZ] DISABLE
  820. [ 65.657562] [TSP] ID-0,UD:1
  821. [ 65.659820] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  822. [ 65.665679] [VIBETONZ] ENABLE
  823. [ 65.709716] [TSP] ID-0,UD:0
  824. [ 65.751159] [VIBETONZ] DISABLE
  825. [ 66.173645] [TSP] ID-0,UD:1
  826. [ 66.218841] [TSP] ID-0,UD:2
  827. [ 66.233886] [TSP] ID-0,UD:2
  828. [ 66.254364] [TSP] ID-0,UD:2
  829. [ 66.264068] [TSP] ID-0,UD:2
  830. [ 66.284545] [TSP] ID-0,UD:2
  831. [ 66.294250] [TSP] ID-0,UD:2
  832. [ 66.314758] [TSP] ID-0,UD:2
  833. [ 66.324493] [TSP] ID-0,UD:2
  834. [ 66.343078] [TSP] ID-0,UD:2
  835. [ 66.355285] [TSP] ID-0,UD:2
  836. [ 66.370330] [TSP] ID-0,UD:2
  837. [ 66.385375] [TSP] ID-0,UD:2
  838. [ 66.400390] [TSP] ID-0,UD:2
  839. [ 66.420867] [TSP] ID-0,UD:2
  840. [ 66.430450] [TSP] ID-0,UD:2
  841. [ 66.450897] [TSP] ID-0,UD:2
  842. [ 66.493286] [TSP] ID-0,UD:0
  843. [ 66.903045] [TSP] ID-0,UD:1
  844. [ 66.958709] [TSP] ID-0,UD:2
  845. [ 66.973815] [TSP] ID-0,UD:2
  846. [ 66.989593] [TSP] ID-0,UD:2
  847. [ 67.003967] [TSP] ID-0,UD:2
  848. [ 67.021514] [TSP] ID-0,UD:2
  849. [ 67.034118] [TSP] ID-0,UD:2
  850. [ 67.052215] [TSP] ID-0,UD:2
  851. [ 67.064361] [TSP] ID-0,UD:2
  852. [ 67.079498] [TSP] ID-0,UD:2
  853. [ 67.094512] [TSP] ID-0,UD:2
  854. [ 67.109588] [TSP] ID-0,UD:2
  855. [ 67.125213] [TSP] ID-0,UD:2
  856. [ 67.140289] [TSP] ID-0,UD:2
  857. [ 67.157135] [TSP] ID-0,UD:2
  858. [ 67.170288] [TSP] ID-0,UD:2
  859. [ 67.212738] [TSP] ID-0,UD:0
  860. [ 67.214874] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  861. [ 67.220947] [VIBETONZ] ENABLE
  862. [ 67.265777] type=1400 audit(1441468826.560:17): avc: denied { write } for pid=155 comm="cp" name="temp" dev=mmcblk1p1 ino=108 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
  863. [ 67.265899] type=1400 audit(1441468826.560:18): avc: denied { remove_name } for pid=155 comm="cp" name="last_kmsg" dev=mmcblk1p1 ino=130 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
  864. [ 67.266021] type=1400 audit(1441468826.560:19): avc: denied { unlink } for pid=155 comm="cp" name="last_kmsg" dev=mmcblk1p1 ino=130 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  865. [ 67.266357] type=1400 audit(1441468826.560:20): avc: denied { add_name } for pid=155 comm="cp" name="last_kmsg" scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir
  866. [ 67.266510] type=1400 audit(1441468826.560:21): avc: denied { create } for pid=155 comm="cp" name="last_kmsg" scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=file
  867. [ 67.353912] [VIBETONZ] DISABLE
  868. [ 68.759246] [TSP] ID-0,UD:1
  869. [ 68.781707] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  870. [ 68.786987] [VIBETONZ] ENABLE
  871. [ 68.831848] [TSP] ID-0,UD:0
  872. [ 68.872497] [VIBETONZ] DISABLE
  873. [ 69.827667] [TKEY] DATA0 3
  874. [ 69.829437] touchkey press keycode:158
  875. [ 69.958679] [TKEY] DATA0 11
  876. [ 69.960571] touchkey release keycode:158
  877. [ 70.158691] [TKEY] DATA0 3
  878. [ 70.160491] touchkey press keycode:158
  879. [ 70.295257] [TKEY] DATA0 11
  880. [ 70.297119] touchkey release keycode:158
  881. [ 70.807800] [TKEY] DATA0 3
  882. [ 70.809661] touchkey press keycode:158
  883. [ 70.926544] [TKEY] DATA0 11
  884. [ 70.928466] touchkey release keycode:158
  885. [ 71.708282] [TKEY] DATA0 3
  886. [ 71.710083] touchkey press keycode:158
  887. [ 71.821990] [TKEY] DATA0 11
  888. [ 71.823852] touchkey release keycode:158
  889. [ 72.980407] [TSP] ID-0,UD:1
  890. [ 72.982635] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  891. [ 72.988586] [VIBETONZ] ENABLE
  892. [ 73.063568] [TSP] ID-0,UD:0
  893. [ 73.073822] [VIBETONZ] DISABLE
  894. [ 73.500549] [TSP] ID-0,UD:1
  895. [ 73.502807] [VIBETONZ] enable_vibetonz_from_user : time = 80 msec
  896. [ 73.508697] [VIBETONZ] ENABLE
  897. [ 73.573059] [TSP] ID-0,UD:0
  898. [ 73.593994] [VIBETONZ] DISABLE
  899. [ 73.966491] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  900. [ 73.973358] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  901. [ 74.035186] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  902. [ 74.042053] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  903. [ 74.166076] SysRq : Emergency Remount R/O
  904. [ 74.183288] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
  905. [ 74.234222] Emergency Remount complete
  906. [ 74.270385] (sec_debug_set_upload_magic) 0
  907. [ 74.273742] set_dload_mode <0> ( C01741C4 )
  908. [ 74.298034] pn544_shutdown
  909. [ 74.300720] sdio_alInitiating msm_sdio_al_shutdown...
  910. [ 74.304748] sdio_al: msm_sdio_al_shutdown: msm_sdio_al_shutdown complete.
  911. [ 74.311676] charm_modem_shutdown: setting AP2MDM_STATUS low for a graceful restart
  912. [ 74.427398] ld9040 start ld9040_shutdown
  913. [ 74.430480] ld9040 lcdc_ld9040_panel_off + (1,1,1)
  914. [ 74.567260] ld9040 : lcdc_config_gpios [0]
  915. [ 74.570434] ld9040 start ld9040_disp_powerdown
  916. [ 74.574920] ld9040 lcdc_ld9040_panel_off -
  917. [ 74.579376] disable_charging_before_reset: skip charging control
  918. [ 74.585174] Disabling non-boot CPUs ...
  919. [ 74.588806] Restarting system with command ''.
  920. [ 74.593170]
  921. [ 74.594726] Restarting Linux version 3.0.101-Candy5-g7ba07d8 (javelinanddart@Candymaker) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Jun 29 16:15:56 CDT 2015
  922. [ 74.594787]
  923. [ 74.610656] set_dload_mode <0> ( C017434C )
  924. [ 74.614624] Going down for restart now
  925. [ 74.618652] pm8xxx_reset_pwr_off, [1]
  926. [ 74.621978] pm8xxx_reset_pwr_off, [2]
  927. [ 74.625640] pm8xxx_reset_pwr_off, [3]
  928. [ 74.629608] pm8xxx_reset_pwr_off, [4]
  929. [ 74.632934] pm8xxx_reset_pwr_off, [5]
  930. [ 74.644592] pm8xxx_reset_pwr_off, [6]
  931. [ 74.647857] pm8xxx_reset_pwr_off, [7]
  932. [ 74.651214] pm8xxx_reset_pwr_off, [8]
  933.  
  934. No errors detected
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!