Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Jumping to AARCH64 kernel via monitor
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.10.72 (robimarko@fedora) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r17469+228-9e9057f416) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Oct 10 20:44:30 2021
- [ 0.000000] Machine model: Xiaomi AX9000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
- [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
- [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
- [ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] On node 0 totalpages: 262144
- [ 0.000000] DMA zone: 4096 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 262144 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 20 pages/cpu s41112 r8192 d32616 u81920
- [ 0.000000] pcpu-alloc: s41112 r8192 d32616 u81920 alloc=20*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
- [ 0.000000] Kernel command line: root=/dev/ubiblock0_1
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 880336K/1048576K available (7102K kernel code, 836K rwdata, 1836K rodata, 9792K init, 302K bss, 168240K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] random: get_random_bytes called from start_kernel+0x350/0x558 with crng_init=0
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000162] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.000177] pid_max: default: 32768 minimum: 301
- [ 0.000305] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.000317] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.001693] rcu: Hierarchical SRCU implementation.
- [ 0.001841] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.002301] smp: Bringing up secondary CPUs ...
- [ 0.002842] Detected VIPT I-cache on CPU1
- [ 0.002907] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.003476] Detected VIPT I-cache on CPU2
- [ 0.003517] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.004133] Detected VIPT I-cache on CPU3
- [ 0.004171] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.004245] smp: Brought up 1 node, 4 CPUs
- [ 0.004258] SMP: Total of 4 processors activated.
- [ 0.004266] CPU features: detected: 32-bit EL0 Support
- [ 0.004275] CPU features: detected: CRC32 instructions
- [ 0.004331] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
- [ 0.004341] CPU: All CPU(s) started at EL1
- [ 0.004362] alternatives: patching kernel code
- [ 0.011951] KASLR disabled due to lack of seed
- [ 0.012093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.012112] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.012245] pinctrl core: initialized pinctrl subsystem
- [ 0.013280] NET: Registered protocol family 16
- [ 0.013727] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
- [ 0.013764] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.013800] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.014387] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.016135] cpuidle: using governor ladder
- [ 0.016350] NET: Registered protocol family 42
- [ 0.016483] ASID allocator initialised with 65536 entries
- [ 0.084671] usbcore: registered new interface driver usbfs
- [ 0.084726] usbcore: registered new interface driver hub
- [ 0.084789] usbcore: registered new device driver usb
- [ 0.085043] qcom_scm: convention: smc arm 64
- [ 0.086376] clocksource: Switched to clocksource arch_sys_counter
- [ 0.087237] NET: Registered protocol family 2
- [ 0.087374] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.088209] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 0.088239] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.088326] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
- [ 0.088473] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.088574] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.088612] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.088783] NET: Registered protocol family 1
- [ 0.088813] PCI: CLS 0 bytes, default 64
- [ 0.842412] workingset: timestamp_bits=46 max_order=18 bucket_order=0
- [ 0.845965] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.845978] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.847315] qcom-qmp-phy 78000.phy: supply vdda-phy not found, using dummy regulator
- [ 0.847461] qcom-qmp-phy 78000.phy: supply vdda-pll not found, using dummy regulator
- [ 0.848414] qcom-qmp-phy 78000.phy: Registered Qcom-QMP phy
- [ 0.849436] qcom-qmp-phy 84000.phy: Registered Qcom-QMP phy
- [ 0.850439] qcom-qmp-phy 8e000.phy: Registered Qcom-QMP phy
- [ 0.851073] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
- [ 0.851205] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
- [ 0.851356] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
- [ 0.852456] qcom-pcie 10000000.pci: host bridge /soc/pci@10000000 ranges:
- [ 0.852501] qcom-pcie 10000000.pci: IO 0x0010200000..0x00102fffff -> 0x0010200000
- [ 0.852525] qcom-pcie 10000000.pci: MEM 0x0010220000..0x001fffffff -> 0x0010220000
- [ 1.066368] qcom-pcie 10000000.pci: Link up
- [ 1.066511] qcom-pcie 10000000.pci: PCI host bridge to bus 0001:00
- [ 1.066526] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 1.066538] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x10200000-0x102fffff])
- [ 1.066549] pci_bus 0001:00: root bus resource [mem 0x10220000-0x1fffffff]
- [ 1.066590] pci 0001:00:00.0: [17cb:0302] type 01 class 0x060400
- [ 1.066613] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 1.066685] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- [ 1.069999] pci 0001:01:00.0: [168c:0050] type 00 class 0x028000
- [ 1.070198] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 1.070529] pci 0001:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 1.071202] pci 0001:01:00.0: supports D1
- [ 1.071211] pci 0001:01:00.0: PME# supported from D0 D1 D3hot
- [ 1.074427] pci 0001:00:00.0: BAR 8: assigned [mem 0x10300000-0x105fffff]
- [ 1.074441] pci 0001:00:00.0: BAR 0: assigned [mem 0x10220000-0x10220fff]
- [ 1.074458] pci 0001:01:00.0: BAR 0: assigned [mem 0x10400000-0x105fffff 64bit]
- [ 1.074554] pci 0001:01:00.0: BAR 6: assigned [mem 0x10300000-0x1030ffff pref]
- [ 1.074565] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- [ 1.074577] pci 0001:00:00.0: bridge window [mem 0x10300000-0x105fffff]
- [ 1.076390] pcieport 0001:00:00.0: PME: Signaling with IRQ 53
- [ 1.077201] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges:
- [ 1.077249] qcom-pcie 20000000.pci: IO 0x0020200000..0x00202fffff -> 0x0020200000
- [ 1.077273] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000
- [ 1.294371] qcom-pcie 20000000.pci: Link up
- [ 1.294500] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00
- [ 1.294516] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 1.294528] pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x20200000-0x202fffff])
- [ 1.294538] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
- [ 1.294576] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400
- [ 1.294597] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 1.294664] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 1.297878] pci 0000:01:00.0: [17cb:1104] type 00 class 0x028000
- [ 1.298013] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 1.298797] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 1.298953] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
- [ 1.301898] pci 0000:00:00.0: BAR 8: assigned [mem 0x20400000-0x205fffff]
- [ 1.301914] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref]
- [ 1.301924] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
- [ 1.301936] pci 0000:00:00.0: BAR 7: assigned [io 0x100000-0x100fff]
- [ 1.301950] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
- [ 1.302020] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 1.302030] pci 0000:00:00.0: bridge window [io 0x100000-0x100fff]
- [ 1.302041] pci 0000:00:00.0: bridge window [mem 0x20400000-0x205fffff]
- [ 1.302050] pci 0000:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref]
- [ 1.303844] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
- [ 1.304854] bam-dma-engine 704000.dma: num-channels unspecified in dt
- [ 1.304869] bam-dma-engine 704000.dma: num-ees unspecified in dt
- [ 1.309596] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 1.310190] msm_serial 78b3000.serial: msm_serial: detected port #0
- [ 1.310226] msm_serial 78b3000.serial: uartclk = 3686400
- [ 1.310279] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
- [ 1.310305] msm_serial: console setup on port #0
- [ 2.291376] printk: console [ttyMSM0] enabled
- [ 2.296506] msm_serial: driver initialized
- [ 2.304480] loop: module loaded
- [ 2.305665] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
- [ 2.307360] nand: Winbond W29N02GZ
- [ 2.313949] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 2.324418] 25 qcomsmem partitions found on MTD device qcom_nand.0
- [ 2.324698] Creating 25 MTD partitions on "qcom_nand.0":
- [ 2.330882] 0x000000000000-0x000000100000 : "0:sbl1"
- [ 2.337591] 0x000000100000-0x000000200000 : "0:mibib"
- [ 2.342459] 0x000000200000-0x000000280000 : "0:bootconfig"
- [ 2.346982] 0x000000280000-0x000000300000 : "0:bootconfig1"
- [ 2.352353] 0x000000300000-0x000000600000 : "0:qsee"
- [ 2.359707] 0x000000600000-0x000000900000 : "0:qsee_1"
- [ 2.364922] 0x000000900000-0x000000980000 : "0:devcfg"
- [ 2.368001] 0x000000980000-0x000000a00000 : "0:devcfg_1"
- [ 2.373106] 0x000000a00000-0x000000a80000 : "0:apdp"
- [ 2.378607] 0x000000a80000-0x000000b00000 : "0:apdp_1"
- [ 2.383522] 0x000000b00000-0x000000b80000 : "0:rpm"
- [ 2.388497] 0x000000b80000-0x000000c00000 : "0:rpm_1"
- [ 2.393255] 0x000000c00000-0x000000c80000 : "0:cdt"
- [ 2.398496] 0x000000c80000-0x000000d00000 : "0:cdt_1"
- [ 2.403159] 0x000000d00000-0x000000d80000 : "0:appsblenv"
- [ 2.408356] 0x000000e80000-0x000000f80000 : "0:appsbl"
- [ 2.414106] 0x000000d80000-0x000000e80000 : "0:appsbl_1"
- [ 2.419154] 0x000000f80000-0x000001000000 : "0:art"
- [ 2.423676] random: fast init done
- [ 2.428703] 0x000001000000-0x000001080000 : "bdata"
- [ 2.432328] 0x000001080000-0x000001100000 : "crash"
- [ 2.437082] 0x000001100000-0x000001180000 : "crash_syslog"
- [ 2.441949] 0x000001180000-0x000004980000 : "rootfs"
- [ 2.488671] mtd: device 21 (rootfs) set to be root filesystem
- [ 2.488947] mtdsplit: no squashfs found in "rootfs"
- [ 2.493412] 0x000004980000-0x000008180000 : "rootfs_1"
- [ 2.540001] 0x000008180000-0x000008280000 : "cfg_bak"
- [ 2.541136] 0x000008280000-0x000010000000 : "overlay"
- [ 2.645283] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
- [ 2.646115] pmd9655_s3: supplied by e-smps1-reg
- [ 2.650346] pmd9655_s4: supplied by e-smps1-reg
- [ 2.654753] pmd9655_ldo11: supplied by e-smps1-reg
- [ 2.659746] libphy: Fixed MDIO Bus: probed
- [ 2.664363] libphy: ipq4019_mdio: probed
- [ 2.703708] i2c /dev entries driver
- [ 2.709077] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
- [ 2.710020] sdhci: Secure Digital Host Controller Interface driver
- [ 2.718682] sdhci: Copyright(c) Pierre Ossman
- [ 2.724827] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.731257] remoteproc remoteproc0: cd00000.q6v5_wcss is available
- [ 2.735712] NET: Registered protocol family 10
- [ 2.741486] Segment Routing with IPv6
- [ 2.745442] NET: Registered protocol family 17
- [ 2.749150] 8021q: 802.1Q VLAN Support v1.8
- [ 2.765799] Freeing unused kernel memory: 9792K
- [ 2.786590] Run /init as init process
- [ 2.786611] with arguments:
- [ 2.789218] /init
- [ 2.792185] with environment:
- [ 2.794436] HOME=/
- [ 2.797375] TERM=linux
- [ 2.928962] init: Console is alive
- [ 2.929064] init: - watchdog -
- [ 2.934822] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 2.936323] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 60
- [ 2.943575] dwc3-qcom 8af8800.usb: IRQ hs_phy_irq not found
- [ 2.948632] dwc3-qcom 8af8800.usb: IRQ dp_hs_phy_irq not found
- [ 2.953914] dwc3-qcom 8af8800.usb: IRQ dm_hs_phy_irq not found
- [ 2.959815] dwc3-qcom 8af8800.usb: IRQ ss_phy_irq not found
- [ 2.972082] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 2.972126] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
- [ 2.976810] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
- [ 2.984264] xhci-hcd xhci-hcd.1.auto: irq 62, io mem 0x08a00000
- [ 2.993684] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 2.999492] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
- [ 3.005046] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 3.012980] hub 1-0:1.0: USB hub found
- [ 3.019295] hub 1-0:1.0: 1 port detected
- [ 3.023156] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.027261] hub 2-0:1.0: USB hub found
- [ 3.035123] hub 2-0:1.0: 1 port detected
- [ 3.040229] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.052527] init: - preinit -
- [ 3.102967] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.117718] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.125517] random: jshn: uninitialized urandom read (4 bytes read)
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 6.182849] procd: - early -
- [ 6.182919] procd: - watchdog -
- [ 6.703007] procd: - watchdog -
- [ 6.703255] procd: - ubus -
- [ 6.707921] urandom_read: 3 callbacks suppressed
- [ 6.707927] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.754785] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.754999] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 6.761436] procd: - init -
- Please press Enter to activate this console.
- [ 6.841368] urngd: v1.0.2 started.
- [ 6.855084] random: crng init done
- [ 6.855111] random: 1 urandom warning(s) missed due to ratelimiting
- [ 6.856586] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 6.900928] ssdk_switch_device_num_init[1160]:INFO:ess-switch dts node number: 1
- [ 6.901005] ssdk_dt_get_switch_node[971]:INFO:ess-switch DT exist!
- [ 6.907400] ssdk_dt_parse_access_mode[857]:INFO:switch_access_mode: local bus
- [ 6.913386] ssdk_dt_parse_access_mode[870]:INFO:switchreg_base_addr: 0x3a000000
- [ 6.920584] ssdk_dt_parse_access_mode[871]:INFO:switchreg_size: 0x1000000
- [ 6.927701] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0x0
- [ 6.934643] ssdk_dt_parse_mac_mode[304]:INFO:mac mode1 = 0xf
- [ 6.940026] ssdk_dt_parse_mac_mode[313]:INFO:mac mode2 = 0xff
- [ 6.945941] ssdk_dt_parse_phy_info[659]:INFO:[PORT 5] port_mac_sel = QGMAC_PORT
- [ 6.951598] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist!
- [ 6.958916] ssdk_plat_init start
- [ 7.015984] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
- [ 7.017004] HPPE initializing...
- [ 7.022436] malibu_phy_api_ops_init[2848]:INFO:qca probe malibu phy driver succeeded!
- [ 7.029067] qca808x_phy_api_ops_init[2208]:INFO:qca probe qca808x phy driver succeeded!
- [ 7.034181] regi_init[3567]:INFO:Initializing HPPE!!
- [ 7.262372] ssdk_ppe_reset_init[1265]:INFO:ppe reset successfully!
- [ 7.265599] qca_hppe_tdm_hw_init[684]:INFO:tdm setup num=96
- [ 7.267762] qca_hppe_portctrl_hw_init[110]:INFO:Hawkeye PPE port initializing
- [ 8.629443] ssdk_switch_register[1718]:INFO:Chip version 0x1500
- [ 8.629472] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
- [ 8.634167] ssdk_switch_register[1744]:INFO:polling is selected
- [ 8.642498] regi_init[3571]:INFO:Initializing HPPE Done!!
- [ 8.648193] regi_init[3631]:INFO:qca-ssdk module init succeeded!
- [ 8.656445] EDMA ver 1 hw init
- [ 8.660003] EDMA HW Reset completed succesfully
- [ 8.662665] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
- [ 8.667058] RxDesc:1 (15-15) RxFill:1 (7-7)
- [ 8.877641] **********************************************************
- [ 8.877674] * NSS Data Plane driver
- [ 8.883088] **********************************************************
- [ 8.892394] Loading modules backported from Linux version v5.14.11-0-g924356b31dcb
- [ 8.893046] Backport generated by backports.git v5.10.68-1-52-g2bb80da2
- [ 8.908035] xt_time: kernel timezone is -0000
- [ 8.931786] PPP generic driver version 2.4.2
- [ 8.932411] NET: Registered protocol family 24
- [ 8.946400] ath10k 5.10 driver, optimized for CT firmware, probing pci device: 0x50.
- [ 8.946782] ath10k_pci 0001:01:00.0: enabling device (0000 -> 0002)
- [ 8.953690] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 9.519579] ath10k_pci 0001:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
- [ 9.519617] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 9.527950] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-87-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 61a92df5
- [ 9.563320] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id N/A crc32 dfee0d28
- [ 10.429471] ath10k_pci 0001:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
- [ 10.436427] ath10k_pci 0001:01:00.0: wmi print 'P 128 V 8 T 410'
- [ 10.436546] ath10k_pci 0001:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
- [ 10.442313] ath10k_pci 0001:01:00.0: wmi print 'alloc rem: 25560 iram: 24780'
- [ 10.489791] ath10k_pci 0001:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
- [ 10.490159] ath10k_pci 0001:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 10.595875] ath: EEPROM regdomain sanitized
- [ 10.595900] ath: EEPROM regdomain: 0x64
- [ 10.598864] ath: EEPROM indicates we should expect a direct regpair map
- [ 10.602691] ath: Country alpha2 being used: 00
- [ 10.609284] ath: Regpair used: 0x64
- [ 10.625110] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
- [ 10.625228] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 10.632437] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
- [ 10.693968] ath11k_pci 0000:01:00.0: setting mhi state: INIT(0)
- [ 10.694050] ath11k_pci 0000:01:00.0: setting mhi state: POWER_ON(2)
- [ 10.698696] mhi 0000:01:00.0: Requested to power ON
- [ 10.705120] mhi 0000:01:00.0: Power on setup success
- [ 10.710014] mhi 0000:01:00.0: Handling state transition: PBL
- [ 10.716954] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 10.726794] mhi 0000:01:00.0: Starting SBL download via BHI. Session ID:252365251
- [ 10.779016] mhi 0000:01:00.0: local ee:PBL device ee:PBL dev_state:RESET
- [ 10.787056] mhi 0000:01:00.0: local ee:SBL device ee:PBL dev_state:READY
- [ 10.789405] mhi 0000:01:00.0: Device in READY State
- [ 10.792865] mhi 0000:01:00.0: Initializing MHI registers
- [ 10.797476] mhi 0000:01:00.0: Starting AMSS download via BHIe. Sequence ID:242009649
- [ 10.797585] mhi 0000:01:00.0: State change event to state: M0
- [ 10.810751] mhi 0000:01:00.0: Received EE event: SBL
- [ 10.933480] mhi 0000:01:00.0: local ee:SBL device ee:SBL dev_state:M0
- [ 10.935201] mhi 0000:01:00.0: Handling state transition: SBL
- [ 10.939503] mhi 0000:01:00.0: local ee:AMSS device ee:SBL dev_state:M0
- [ 10.939605] mhi 0000:01:00.0: Received EE event: AMSS
- [ 10.950986] mhi 0000:01:00.0: Handling state transition: MISSION_MODE
- [ 10.956121] mhi 0000:01:00.0: Processing Mission Mode transition
- [ 10.962763] mhi 0000:01:00.0: Preparing channel: 20
- [ 10.969008] mhi 0000:01:00.0: Chan: 20 successfully moved to start state
- [ 10.973237] mhi 0000:01:00.0: Preparing channel: 21
- [ 10.980517] mhi 0000:01:00.0: Chan: 21 successfully moved to start state
- [ 10.988583] ------------[ cut here ]------------
- [ 10.991690] WARNING: CPU: 0 PID: 37 at __alloc_pages_nodemask+0x174/0x220
- [ 10.996281] Modules linked in: pppoe ppp_async iptable_nat ath11k_pci ath11k_ahb ath11k ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD pppox ppp_generic nf_nat nf_flow_table nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xtg
- [ 11.044113] CPU: 0 PID: 37 Comm: kworker/u8:2 Not tainted 5.10.72 #0
- [ 11.066332] Hardware name: Xiaomi AX9000 (DT)
- [ 11.072851] Workqueue: qmi_msg_handler qmi_data_ready_work
- [ 11.077096] pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--)
- [ 11.082480] pc : __alloc_pages_nodemask+0x174/0x220
- [ 11.088641] lr : __dma_direct_alloc_pages+0x7c/0x180
- [ 11.093238] sp : ffffffc0114b39b0
- [ 11.098443] x29: ffffffc0114b39b0 x28: 0000000000000000
- [ 11.101658] x27: ffffff8002691148 x26: 0000000000000005
- [ 11.107040] x25: 00000000fffffffa x24: 00000000022fffff
- [ 11.112347] x23: ffffffc011361000 x22: ffffffc01087c000
- [ 11.117630] x21: 000000000000000e x20: ffffff800322f8b0
- [ 11.122940] x19: 0000000000000cc1 x18: 0000000000000007
- [ 11.128220] x17: 000000000000000e x16: 0000000000000001
- [ 11.133516] x15: 0000000000000019 x14: 003ab5324847b1de
- [ 11.138810] x13: 0000000000000000 x12: 0000000000000001
- [ 11.144106] x11: 0000000000000000 x10: 0000000000000203
- [ 11.149400] x9 : 0000000000000000 x8 : ffffff800300c000
- [ 11.154696] x7 : 0000000000000000 x6 : 0000000002300000
- [ 11.159991] x5 : 0000000002300000 x4 : 0000000000000000
- [ 11.165301] x3 : 0000000000000000 x2 : 0000000000000000
- [ 11.170582] x1 : 000000000000000e x0 : 0000000000000cc1
- [ 11.175877] Call trace:
- [ 11.181175] __alloc_pages_nodemask+0x174/0x220
- [ 11.183344] __dma_direct_alloc_pages+0x7c/0x180
- [ 11.187857] dma_direct_alloc+0x68/0x340
- [ 11.192717] dma_alloc_attrs+0x84/0xa4
- [ 11.196637] ath11k_qmi_deinit_service+0x1500/0x1730 [ath11k]
- [ 11.200193] qmi_invoke_handler+0xb4/0x124
- [ 11.205999] qmi_handle_message+0x6c/0x16c
- [ 11.209992] qmi_data_ready_work+0x1e0/0x360
- [ 11.214075] process_one_work+0x1d4/0x380
- [ 11.218498] worker_thread+0x7c/0x4e0
- [ 11.222403] kthread+0x128/0x130
- [ 11.226049] ret_from_fork+0x10/0x34
- [ 11.229351] ---[ end trace 64799d271ef44dcb ]---
- [ 11.246456] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
- [ 11.246493] ath11k_pci 0000:01:00.0: fw_version 0x2506844c fw_build_timestamp 2021-07-13 10:24 fw_build_id
- [ 12.930897] nss-dp 3a001000.dp1 eth0: nss_dp_edma: Registering netdev eth0(qcom-id:1) with EDMA
- [ 12.931321] nss-dp 3a001000.dp1 eth0: PHY Link up speed: 1000
- [ 12.939087] br-lan: port 1(eth0) entered blocking state
- [ 12.944389] br-lan: port 1(eth0) entered disabled state
- [ 12.949536] device eth0 entered promiscuous mode
- [ 12.958724] nss-dp 3a001200.dp2 eth1: nss_dp_edma: Registering netdev eth1(qcom-id:2) with EDMA
- [ 12.960123] br-lan: port 2(eth1) entered blocking state
- [ 12.967959] br-lan: port 2(eth1) entered disabled state
- [ 12.973278] device eth1 entered promiscuous mode
- [ 12.980053] nss-dp 3a001400.dp3 eth2: nss_dp_edma: Registering netdev eth2(qcom-id:3) with EDMA
- [ 12.983883] br-lan: port 3(eth2) entered blocking state
- [ 12.991632] br-lan: port 3(eth2) entered disabled state
- [ 12.996926] device eth2 entered promiscuous mode
- [ 13.003601] nss-dp 3a001600.dp4 eth3: nss_dp_edma: Registering netdev eth3(qcom-id:4) with EDMA
- [ 13.007587] br-lan: port 4(eth3) entered blocking state
- [ 13.015277] br-lan: port 4(eth3) entered disabled state
- [ 13.020616] device eth3 entered promiscuous mode
- [ 13.028501] nss-dp 3a001800.dp5 eth4: nss_dp_edma: Registering netdev eth4(qcom-id:5) with EDMA
- [ 13.954429] br-lan: port 1(eth0) entered blocking state
- [ 13.954467] br-lan: port 1(eth0) entered forwarding state
- [ 13.958762] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 33.758396] pmd9655_ldo11: disabling
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement