API tools faq
paste
Bullet64

update to quartz64-5.14

Bullet64
Jul 23rd, 2021
80
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.81 KB | None | 0 0
raw download clone embed print report
  1. root@quartz64:~# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  3. [ 0.000000] Linux version 5.14.0-rc1 (root@runner-z3wu8uu--project-27231216-concurrent-0) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Fri Jul 23 15:20:34 UTC 2021
  4. [ 0.000000] Machine model: Pine64 RK3566 Quartz64-A Board
  5. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
  6. [ 0.000000] printk: bootconsole [uart8250] enabled
  7. [ 0.000000] efi: UEFI not found.
  8. [ 0.000000] NUMA: No NUMA configuration found
  9. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000001ffffffff]
  10. [ 0.000000] NUMA: NODE_DATA [mem 0x1ff7c2c00-0x1ff7c4fff]
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
  13. [ 0.000000] DMA32 empty
  14. [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
  15. [ 0.000000] Movable zone start for each node
  16. [ 0.000000] Early memory node ranges
  17. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000083fffff]
  18. [ 0.000000] node 0: [mem 0x0000000009400000-0x00000000efffffff]
  19. [ 0.000000] node 0: [mem 0x00000001f0000000-0x00000001ffffffff]
  20. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
  21. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  22. [ 0.000000] On node 0, zone DMA: 4096 pages in unavailable ranges
  23. [ 0.000000] cma: Reserved 32 MiB at 0x00000000ee000000
  24. [ 0.000000] psci: probing for conduit method from DT.
  25. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  26. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  27. [ 0.000000] psci: Trusted OS migration not required
  28. [ 0.000000] psci: SMC Calling Convention v1.2
  29. [ 0.000000] percpu: Embedded 32 pages/cpu s90328 r8192 d32552 u131072
  30. [ 0.000000] pcpu-alloc: s90328 r8192 d32552 u131072 alloc=32*4096
  31. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. [ 0.000000] Detected VIPT I-cache on CPU0
  33. [ 0.000000] CPU features: detected: GIC system register CPU interface
  34. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  35. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  36. [ 0.000000] alternatives: patching kernel code
  37. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027656
  38. [ 0.000000] Policy zone: Normal
  39. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 root=/dev/sda2
  40. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  41. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  42. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  43. [ 0.000000] software IO TLB: mapped [mem 0x00000000ea000000-0x00000000ee000000] (64MB)
  44. [ 0.000000] Memory: 3952664K/4175872K available (18112K kernel code, 3050K rwdata, 7420K rodata, 5888K init, 645K bss, 190440K reserved, 32768K cma-reserved)
  45. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  46. [ 0.000000] ftrace: allocating 56131 entries in 220 pages
  47. [ 0.000000] ftrace: allocated 220 pages with 5 groups
  48. [ 0.000000] trace event string verifier disabled
  49. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  50. [ 0.000000] rcu: RCU event tracing is enabled.
  51. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  52. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  53. [ 0.000000] Rude variant of Tasks RCU enabled.
  54. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  55. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  56. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  57. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  58. [ 0.000000] GICv3: 320 SPIs implemented
  59. [ 0.000000] GICv3: 0 Extended SPIs implemented
  60. [ 0.000000] GICv3: Distributor has no Range Selector support
  61. [ 0.000000] GICv3: MBI range [296:319]
  62. [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000
  63. [ 0.000000] Root IRQ handler: gic_handle_irq
  64. [ 0.000000] GICv3: 16 PPIs implemented
  65. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  66. [ 0.000000] ITS: No ITS available, not enabling LPIs
  67. [ 0.000000] random: get_random_bytes called from start_kernel+0x7c0/0x9b0 with crng_init=0
  68. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  69. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  70. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  71. [ 0.001351] Console: colour dummy device 80x25
  72. [ 0.001944] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  73. [ 0.002926] pid_max: default: 32768 minimum: 301
  74. [ 0.003469] LSM: Security Framework initializing
  75. [ 0.004006] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  76. [ 0.004737] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  77. [ 0.008307] rcu: Hierarchical SRCU implementation.
  78. [ 0.010451] EFI services will not be available.
  79. [ 0.011582] smp: Bringing up secondary CPUs ...
  80. [ 0.013043] Detected VIPT I-cache on CPU1
  81. [ 0.013092] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  82. [ 0.013165] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  83. [ 0.014292] Detected VIPT I-cache on CPU2
  84. [ 0.014337] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  85. [ 0.014391] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  86. [ 0.015483] Detected VIPT I-cache on CPU3
  87. [ 0.015525] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  88. [ 0.015577] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  89. [ 0.015760] smp: Brought up 1 node, 4 CPUs
  90. [ 0.021130] SMP: Total of 4 processors activated.
  91. [ 0.021581] CPU features: detected: 32-bit EL0 Support
  92. [ 0.022066] CPU features: detected: 32-bit EL1 Support
  93. [ 0.022614] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  94. [ 0.023431] CPU features: detected: Common not Private translations
  95. [ 0.024024] CPU features: detected: CRC32 instructions
  96. [ 0.024512] CPU features: detected: RCpc load-acquire (LDAPR)
  97. [ 0.025054] CPU features: detected: LSE atomic instructions
  98. [ 0.025580] CPU features: detected: Privileged Access Never
  99. [ 0.026105] CPU features: detected: RAS Extension Support
  100. [ 0.026643] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  101. [ 0.068563] CPU: All CPU(s) started at EL2
  102. [ 0.071980] devtmpfs: initialized
  103. [ 0.085126] KASLR disabled due to lack of seed
  104. [ 0.085840] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  105. [ 0.086781] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  106. [ 0.088737] pinctrl core: initialized pinctrl subsystem
  107. [ 0.089780] regulator-dummy: no parameters, enabled
  108. [ 0.090779] DMI not present or invalid.
  109. [ 0.091850] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  110. [ 0.094874] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  111. [ 0.095809] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  112. [ 0.096876] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  113. [ 0.097705] audit: initializing netlink subsys (disabled)
  114. [ 0.098475] audit: type=2000 audit(0.096:1): state=initialized audit_enabled=0 res=1
  115. [ 0.100352] thermal_sys: Registered thermal governor 'step_wise'
  116. [ 0.100365] thermal_sys: Registered thermal governor 'power_allocator'
  117. [ 0.101525] cpuidle: using governor menu
  118. [ 0.102793] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  119. [ 0.103656] ASID allocator initialised with 65536 entries
  120. [ 0.105184] Serial: AMBA PL011 UART driver
  121. [ 0.141404] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000
  122. [ 0.143015] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000
  123. [ 0.144612] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000
  124. [ 0.146050] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000
  125. [ 0.147520] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000
  126. [ 0.177824] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  127. [ 0.178478] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  128. [ 0.179113] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  129. [ 0.179747] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  130. [ 0.182872] cryptd: max_cpu_qlen set to 1000
  131. [ 0.188222] ACPI: Interpreter disabled.
  132. [ 0.189660] vcc12v_dcin: 12000 mV, enabled
  133. [ 0.190279] reg-fixed-voltage vcc12v_dcin: vcc12v_dcin supplying 12000000uV
  134. [ 0.191176] vbus: will resolve supply early: vin
  135. [ 0.191621] reg-fixed-voltage vbus: Looking up vin-supply from device tree
  136. [ 0.192283] vbus: supplied by vcc12v_dcin
  137. [ 0.192702] vcc12v_dcin: could not add device link regulator.2: -ENOENT
  138. [ 0.193400] vbus: 5000 mV, enabled
  139. [ 0.193913] reg-fixed-voltage vbus: vbus supplying 5000000uV
  140. [ 0.194676] vcc5v0_usb: will resolve supply early: vin
  141. [ 0.195169] reg-fixed-voltage vcc5v0_usb: Looking up vin-supply from device tree
  142. [ 0.195877] vcc5v0_usb: supplied by vcc12v_dcin
  143. [ 0.196313] vcc12v_dcin: could not add device link regulator.3: -ENOENT
  144. [ 0.197042] vcc5v0_usb: 5000 mV, enabled
  145. [ 0.197594] reg-fixed-voltage vcc5v0_usb: vcc5v0_usb supplying 5000000uV
  146. [ 0.198630] vcc5v0_usb20_host: 5000 mV, disabled
  147. [ 0.199260] reg-fixed-voltage vcc5v0_usb20_host: Looking up vin-supply from device tree
  148. [ 0.200032] vcc5v0_usb20_host: supplied by vcc5v0_usb
  149. [ 0.200610] reg-fixed-voltage vcc5v0_usb20_host: vcc5v0_usb20_host supplying 5000000uV
  150. [ 0.201637] vcc_sys: will resolve supply early: vin
  151. [ 0.202106] reg-fixed-voltage vcc_sys: Looking up vin-supply from device tree
  152. [ 0.202791] vcc_sys: supplied by vbus
  153. [ 0.203146] vbus: could not add device link regulator.5: -ENOENT
  154. [ 0.203780] vcc_sys: 4400 mV, enabled
  155. [ 0.204341] reg-fixed-voltage vcc_sys: vcc_sys supplying 4400000uV
  156. [ 0.205696] iommu: Default domain type: Translated
  157. [ 0.206710] vgaarb: loaded
  158. [ 0.207371] SCSI subsystem initialized
  159. [ 0.208017] libata version 3.00 loaded.
  160. [ 0.208739] usbcore: registered new interface driver usbfs
  161. [ 0.209342] usbcore: registered new interface driver hub
  162. [ 0.209942] usbcore: registered new device driver usb
  163. [ 0.211142] pps_core: LinuxPPS API ver. 1 registered
  164. [ 0.211616] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  165. [ 0.212495] PTP clock support registered
  166. [ 0.213188] EDAC MC: Ver: 3.0.0
  167. [ 0.214752] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  168. [ 0.215463] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  169. [ 0.217298] FPGA manager framework
  170. [ 0.217773] Advanced Linux Sound Architecture Driver Initialized.
  171. [ 0.219300] Bluetooth: Core ver 2.22
  172. [ 0.219706] NET: Registered PF_BLUETOOTH protocol family
  173. [ 0.220212] Bluetooth: HCI device and connection manager initialized
  174. [ 0.220824] Bluetooth: HCI socket layer initialized
  175. [ 0.221295] Bluetooth: L2CAP socket layer initialized
  176. [ 0.221799] Bluetooth: SCO socket layer initialized
  177. [ 0.222974] clocksource: Switched to clocksource arch_sys_counter
  178. [ 0.321633] VFS: Disk quotas dquot_6.6.0
  179. [ 0.322098] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  180. [ 0.323140] pnp: PnP ACPI: disabled
  181. [ 0.337292] NET: Registered PF_INET protocol family
  182. [ 0.338108] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  183. [ 0.341368] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  184. [ 0.342322] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  185. [ 0.343362] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  186. [ 0.344541] TCP: Hash tables configured (established 32768 bind 32768)
  187. [ 0.345318] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  188. [ 0.346036] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  189. [ 0.347010] NET: Registered PF_UNIX/PF_LOCAL protocol family
  190. [ 0.348371] RPC: Registered named UNIX socket transport module.
  191. [ 0.348939] RPC: Registered udp transport module.
  192. [ 0.349388] RPC: Registered tcp transport module.
  193. [ 0.349834] RPC: Registered tcp NFSv4.1 backchannel transport module.
  194. [ 0.351489] PCI: CLS 0 bytes, default 64
  195. [ 0.353285] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
  196. [ 0.354771] kvm [1]: IPA Size Limit: 40 bits
  197. [ 0.355239] kvm [1]: GICv3: no GICV resource entry
  198. [ 0.355698] kvm [1]: disabling GICv2 emulation
  199. [ 0.356145] kvm [1]: GIC system register CPU interface enabled
  200. [ 0.356909] kvm [1]: vgic interrupt IRQ9
  201. [ 0.357756] kvm [1]: VHE mode initialized successfully
  202. [ 0.366946] Initialise system trusted keyrings
  203. [ 0.367688] workingset: timestamp_bits=42 max_order=20 bucket_order=0
  204. [ 0.379275] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  205. [ 0.380956] NFS: Registering the id_resolver key type
  206. [ 0.381469] Key type id_resolver registered
  207. [ 0.381869] Key type id_legacy registered
  208. [ 0.382390] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  209. [ 0.383076] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  210. [ 0.384058] 9p: Installing v9fs 9p2000 file system support
  211. [ 0.438226] Key type asymmetric registered
  212. [ 0.438626] Asymmetric key parser 'x509' registered
  213. [ 0.439175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  214. [ 0.439881] io scheduler mq-deadline registered
  215. [ 0.440326] io scheduler kyber registered
  216. [ 0.444937] phy phy-fe8a0000.usb2-phy.0: Looking up phy-supply from device tree
  217. [ 0.445665] vcc5v0_usb20_host: could not add device link phy-fe8a0000.usb2-phy.0: -ENOENT
  218. [ 0.446730] phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply from device tree
  219. [ 0.447484] rockchip-usb2phy fe8a0000.usb2-phy: failed to create phy
  220. [ 0.450105] phy phy-fe8b0000.usb2-phy.0: Looking up phy-supply from device tree
  221. [ 0.450830] vcc5v0_usb20_host: could not add device link phy-fe8b0000.usb2-phy.0: -ENOENT
  222. [ 0.451917] phy phy-fe8b0000.usb2-phy.1: Looking up phy-supply from device tree
  223. [ 0.452629] vcc5v0_usb20_host: could not add device link phy-fe8b0000.usb2-phy.1: -ENOENT
  224. [ 0.455195] phy phy-fe830000.phy.2: Looking up phy-supply from device tree
  225. [ 0.455864] phy phy-fe830000.phy.2: Looking up phy-supply property in node /phy@fe830000 failed
  226. [ 0.457178] phy phy-fe840000.phy.3: Looking up phy-supply from device tree
  227. [ 0.457840] phy phy-fe840000.phy.3: Looking up phy-supply property in node /phy@fe840000 failed
  228. [ 0.463572] EINJ: ACPI disabled.
  229. [ 0.471379] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
  230. [ 0.472035] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  231. [ 0.476041] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
  232. [ 0.476687] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  233. [ 0.481472] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
  234. [ 0.487870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  235. [ 0.491848] fdd50000.serial: ttyS0 at MMIO 0xfdd50000 (irq = 24, base_baud = 1500000) is a 16550A
  236. [ 0.494258] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 40, base_baud = 1500000) is a 16550A
  237. [ 0.495417] serial serial0: tty port ttyS1 registered
  238. [ 0.497127] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 41, base_baud = 1500000) is a 16550A
  239. [ 0.498215] printk: console [ttyS2] enabled
  240. [ 0.499057] printk: bootconsole [uart8250] disabled
  241. [ 0.503398] cacheinfo: Unable to detect cache hierarchy for CPU 0
  242. [ 0.518084] loop: module loaded
  243. [ 0.519722] megasas: 07.717.02.00-rc1
  244. [ 0.521237] ahci fc400000.sata: Looking up ahci-supply from device tree
  245. [ 0.521837] ahci fc400000.sata: Looking up ahci-supply property in node /sata@fc400000 failed
  246. [ 0.522625] ahci fc400000.sata: supply ahci not found, using dummy regulator
  247. [ 0.523485] ahci fc400000.sata: Looking up phy-supply from device tree
  248. [ 0.524076] ahci fc400000.sata: Looking up phy-supply property in node /sata@fc400000 failed
  249. [ 0.524841] ahci fc400000.sata: supply phy not found, using dummy regulator
  250. [ 0.525674] ahci fc400000.sata: Looking up target-supply from device tree
  251. [ 0.526285] ahci fc400000.sata: Looking up target-supply property in node /sata@fc400000 failed
  252. [ 0.527097] ahci fc400000.sata: supply target not found, using dummy regulator
  253. [ 0.527980] ahci fc400000.sata: forcing port_map 0x0 -> 0x1
  254. [ 0.528532] ahci fc400000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  255. [ 0.529295] ahci fc400000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
  256. [ 0.530084] ahci fc400000.sata: port 0 is not capable of FBS
  257. [ 0.532241] scsi host0: ahci
  258. [ 0.532976] ata1: SATA max UDMA/133 mmio [mem 0xfc400000-0xfc400fff] port 0x100 irq 18
  259. [ 0.538493] libphy: Fixed MDIO Bus: probed
  260. [ 0.541308] tun: Universal TUN/TAP device driver, 1.6
  261. [ 0.542097] e100: Intel(R) PRO/100 Network Driver
  262. [ 0.542521] e100: Copyright(c) 1999-2006 Intel Corporation
  263. [ 0.543136] e1000: Intel(R) PRO/1000 Network Driver
  264. [ 0.543573] e1000: Copyright (c) 1999-2006 Intel Corporation.
  265. [ 0.544165] e1000e: Intel(R) PRO/1000 Network Driver
  266. [ 0.544609] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  267. [ 0.545195] igb: Intel(R) Gigabit Ethernet Network Driver
  268. [ 0.545677] igb: Copyright (c) 2007-2014 Intel Corporation.
  269. [ 0.546223] Intel(R) 2.5G Ethernet Linux Driver
  270. [ 0.546628] Copyright(c) 2018 Intel Corporation.
  271. [ 0.547122] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  272. [ 0.547680] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  273. [ 0.548258] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
  274. [ 0.548798] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
  275. [ 0.549672] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
  276. [ 0.550358] ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
  277. [ 0.551208] i40e: Intel(R) Ethernet Connection XL710 Network Driver
  278. [ 0.551767] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
  279. [ 0.552557] ixgb: Intel(R) PRO/10GbE Network Driver
  280. [ 0.552995] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  281. [ 0.553564] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
  282. [ 0.554188] Copyright (c) 2013 - 2018 Intel Corporation.
  283. [ 0.554924] Intel(R) Ethernet Switch Host Interface Driver
  284. [ 0.555443] Copyright(c) 2013 - 2019 Intel Corporation.
  285. [ 0.556197] ice: Intel(R) Ethernet Connection E800 Series Linux Driver
  286. [ 0.556777] ice: Copyright (c) 2018, Intel Corporation.
  287. [ 0.559121] usbcore: registered new interface driver rtl8192cu
  288. [ 0.560139] usbcore: registered new interface driver rtl8xxxu
  289. [ 0.560916] usbcore: registered new interface driver ax88179_178a
  290. [ 0.561789] VFIO - User Level meta-driver version: 0.3
  291. [ 0.566625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  292. [ 0.567254] ehci-pci: EHCI PCI platform driver
  293. [ 0.567723] ehci-platform: EHCI generic platform driver
  294. [ 0.570685] ehci-platform fd800000.usb: EHCI Host Controller
  295. [ 0.571261] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
  296. [ 0.572151] ehci-platform fd800000.usb: irq 19, io mem 0xfd800000
  297. [ 0.587021] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  298. [ 0.588644] hub 1-0:1.0: USB hub found
  299. [ 0.589037] hub 1-0:1.0: 1 port detected
  300. [ 0.592377] ehci-platform fd880000.usb: EHCI Host Controller
  301. [ 0.592908] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
  302. [ 0.593758] ehci-platform fd880000.usb: irq 21, io mem 0xfd880000
  303. [ 0.607018] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  304. [ 0.608524] hub 2-0:1.0: USB hub found
  305. [ 0.608912] hub 2-0:1.0: 1 port detected
  306. [ 0.610169] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  307. [ 0.610748] ohci-pci: OHCI PCI platform driver
  308. [ 0.611316] ohci-platform: OHCI generic platform driver
  309. [ 0.612274] ohci-platform fd840000.usb: Generic Platform OHCI controller
  310. [ 0.612895] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
  311. [ 0.613764] ohci-platform fd840000.usb: irq 20, io mem 0xfd840000
  312. [ 0.676032] hub 3-0:1.0: USB hub found
  313. [ 0.676425] hub 3-0:1.0: 1 port detected
  314. [ 0.677683] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  315. [ 0.678301] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
  316. [ 0.679204] ohci-platform fd8c0000.usb: irq 22, io mem 0xfd8c0000
  317. [ 0.743977] hub 4-0:1.0: USB hub found
  318. [ 0.744369] hub 4-0:1.0: 1 port detected
  319. [ 0.746417] usbcore: registered new interface driver usb-storage
  320. [ 0.751131] i2c /dev entries driver
  321. [ 0.754032] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
  322. [ 0.756146] vdd_cpu: will resolve supply early: vin
  323. [ 0.756590] fan53555-regulator 0-001c: Looking up vin-supply from device tree
  324. [ 0.757241] vdd_cpu: supplied by vcc_sys
  325. [ 0.757600] vcc_sys: could not add device link regulator.6: -ENOENT
  326. [ 0.761130] vdd_cpu: 800 <--> 1150 mV at 900 mV, enabled
  327. [ 0.765946] rk808 0-0020: chip id: 0x8170
  328. [ 0.801987] random: fast init done
  329. [ 0.810009] rk808-regulator rk808-regulator: there is no dvs0 gpio
  330. [ 0.810593] rk808-regulator rk808-regulator: there is no dvs1 gpio
  331. [ 0.813707] vdd_logic: will resolve supply early: vcc1
  332. [ 0.814175] rk808 0-0020: Looking up vcc1-supply from device tree
  333. [ 0.814736] vdd_logic: supplied by vcc_sys
  334. [ 0.815137] vcc_sys: could not add device link regulator.7: -ENOENT
  335. [ 0.819996] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled
  336. [ 0.823252] vdd_gpu: will resolve supply early: vcc2
  337. [ 0.823703] rk808 0-0020: Looking up vcc2-supply from device tree
  338. [ 0.824258] vdd_gpu: supplied by vcc_sys
  339. [ 0.824629] vcc_sys: could not add device link regulator.8: -ENOENT
  340. [ 0.829012] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled
  341. [ 0.831751] vcc_ddr: will resolve supply early: vcc3
  342. [ 0.832201] rk808 0-0020: Looking up vcc3-supply from device tree
  343. [ 0.832756] vcc_ddr: supplied by vcc_sys
  344. [ 0.833113] vcc_sys: could not add device link regulator.9: -ENOENT
  345. [ 0.836512] vcc_ddr: 1100 mV, enabled
  346. [ 0.839110] vcc_3v3: will resolve supply early: vcc4
  347. [ 0.839559] rk808 0-0020: Looking up vcc4-supply from device tree
  348. [ 0.840114] vcc_3v3: supplied by vcc_sys
  349. [ 0.840470] vcc_sys: could not add device link regulator.10: -ENOENT
  350. [ 0.843867] vcc_3v3: 3300 mV, enabled
  351. [ 0.846453] vcca1v8_pmu: will resolve supply early: vcc5
  352. [ 0.846934] rk808 0-0020: Looking up vcc5-supply from device tree
  353. [ 0.847523] vcca1v8_pmu: supplied by vcc_sys
  354. [ 0.847912] vcc_sys: could not add device link regulator.11: -ENOENT
  355. [ 0.851863] vcca1v8_pmu: 1800 mV, enabled
  356. [ 0.853991] vdda_0v9: will resolve supply early: vcc5
  357. [ 0.854449] rk808 0-0020: Looking up vcc5-supply from device tree
  358. [ 0.855035] vdda_0v9: supplied by vcc_sys
  359. [ 0.855403] vcc_sys: could not add device link regulator.12: -ENOENT
  360. [ 0.858844] vdda_0v9: 900 mV, enabled
  361. [ 0.861450] vdda0v9_pmu: will resolve supply early: vcc5
  362. [ 0.861930] rk808 0-0020: Looking up vcc5-supply from device tree
  363. [ 0.862484] vdda0v9_pmu: supplied by vcc_sys
  364. [ 0.862872] vcc_sys: could not add device link regulator.13: -ENOENT
  365. [ 0.866832] vdda0v9_pmu: 900 mV, enabled
  366. [ 0.868992] vccio_acodec: will resolve supply early: vcc6
  367. [ 0.869481] rk808 0-0020: Looking up vcc6-supply from device tree
  368. [ 0.870036] vccio_acodec: supplied by vcc_sys
  369. [ 0.870432] vcc_sys: could not add device link regulator.14: -ENOENT
  370. [ 0.873904] vccio_acodec: 3300 mV, enabled
  371. [ 0.876117] vccio_sd: will resolve supply early: vcc6
  372. [ 0.876576] rk808 0-0020: Looking up vcc6-supply from device tree
  373. [ 0.877130] vccio_sd: supplied by vcc_sys
  374. [ 0.877495] vcc_sys: could not add device link regulator.15: -ENOENT
  375. [ 0.881416] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled
  376. [ 0.884168] vcc3v3_pmu: will resolve supply early: vcc6
  377. [ 0.884641] rk808 0-0020: Looking up vcc6-supply from device tree
  378. [ 0.885195] vcc3v3_pmu: supplied by vcc_sys
  379. [ 0.885573] vcc_sys: could not add device link regulator.16: -ENOENT
  380. [ 0.889497] vcc3v3_pmu: 3300 mV, enabled
  381. [ 0.891632] vcc_1v8: will resolve supply early: vcc7
  382. [ 0.892082] rk808 0-0020: Looking up vcc7-supply from device tree
  383. [ 0.892635] vcc_1v8: supplied by vcc_sys
  384. [ 0.892993] vcc_sys: could not add device link regulator.17: -ENOENT
  385. [ 0.896429] vcc_1v8: 1800 mV, enabled
  386. [ 0.898555] vcc1v8_dvp: will resolve supply early: vcc7
  387. [ 0.899058] rk808 0-0020: Looking up vcc7-supply from device tree
  388. [ 0.899615] vcc1v8_dvp: supplied by vcc_sys
  389. [ 0.899997] vcc_sys: could not add device link regulator.18: -ENOENT
  390. [ 0.903460] vcc1v8_dvp: 1800 mV, enabled
  391. [ 0.905601] vcc2v8_dvp: will resolve supply early: vcc7
  392. [ 0.906074] rk808 0-0020: Looking up vcc7-supply from device tree
  393. [ 0.906627] vcc2v8_dvp: supplied by vcc_sys
  394. [ 0.907040] vcc_sys: could not add device link regulator.19: -ENOENT
  395. [ 0.910485] vcc2v8_dvp: 2800 mV, enabled
  396. [ 0.912628] boost: will resolve supply early: vcc8
  397. [ 0.913064] rk808 0-0020: Looking up vcc8-supply from device tree
  398. [ 0.913619] boost: supplied by vcc_sys
  399. [ 0.913961] vcc_sys: could not add device link regulator.20: -ENOENT
  400. [ 0.917398] boost: 5000 mV, enabled
  401. [ 0.919538] otg_switch: no parameters, disabled
  402. [ 0.920141] rk808 0-0020: Looking up vcc9-supply from device tree
  403. [ 0.920712] otg_switch: supplied by boost
  404. [ 0.948578] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
  405. [ 0.950261] gpio-fan gpio_fan: GPIO fan initialized
  406. [ 0.953167] Bluetooth: HCI UART driver ver 2.3
  407. [ 0.953582] Bluetooth: HCI UART protocol H4 registered
  408. [ 0.954088] Bluetooth: HCI UART protocol LL registered
  409. [ 0.954583] Bluetooth: HCI UART protocol Three-wire (H5) registered
  410. [ 0.955473] Bluetooth: HCI UART protocol Broadcom registered
  411. [ 0.956080] usbcore: registered new interface driver btusb
  412. [ 0.956211] hci_uart_bcm serial0-0: Looking up vbat-supply from device tree
  413. [ 0.956811] cpu cpu0: Looking up cpu-supply from device tree
  414. [ 0.957389] hci_uart_bcm serial0-0: Looking up vddio-supply from device tree
  415. [ 0.961339] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
  416. [ 0.963848] sdhci: Secure Digital Host Controller Interface driver
  417. [ 0.964402] sdhci: Copyright(c) Pierre Ossman
  418. [ 0.965131] Synopsys Designware Multimedia Card Interface Driver
  419. [ 0.966293] sdhci-pltfm: SDHCI platform and OF driver helper
  420. [ 0.966676] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  421. [ 0.967441] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  422. [ 0.967670] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree
  423. [ 0.968027] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  424. [ 0.969196] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
  425. [ 0.970032] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree
  426. [ 0.970084] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
  427. [ 0.971436] ledtrig-cpu: registered to indicate activity on CPUs
  428. [ 0.972273] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  429. [ 0.972919] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  430. [ 0.973315] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
  431. [ 0.973932] usbcore: registered new interface driver usbhid
  432. [ 0.974619] usbhid: USB HID core driver
  433. [ 0.977350] dwmmc_rockchip fe2c0000.mmc: Failed getting OCR mask: 0
  434. [ 0.977965] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
  435. [ 0.978475] mmc_host mmc2: card is non-removable.
  436. [ 0.980909] dwmmc_rockchip fe2c0000.mmc: could not set regulator OCR (-22)
  437. [ 0.981529] dwmmc_rockchip fe2c0000.mmc: failed to enable vmmc regulator
  438. [ 0.982182] NET: Registered PF_PACKET protocol family
  439. [ 0.982811] Bluetooth: RFCOMM TTY layer initialized
  440. [ 0.983270] Bluetooth: RFCOMM socket layer initialized
  441. [ 0.983756] Bluetooth: RFCOMM ver 1.11
  442. [ 0.984095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  443. [ 0.984561] Bluetooth: BNEP filters: protocol multicast
  444. [ 0.985023] Bluetooth: BNEP socket layer initialized
  445. [ 0.985459] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  446. [ 0.985979] Bluetooth: HIDP socket layer initialized
  447. [ 0.986541] 9pnet: Installing 9P2000 support
  448. [ 0.986983] Key type dns_resolver registered
  449. [ 0.987649] registered taskstats version 1
  450. [ 0.988014] Loading compiled-in X.509 certificates
  451. [ 1.006175] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
  452. [ 1.018207] vcc3v3_pcie_p: 3300 mV, disabled
  453. [ 1.018754] reg-fixed-voltage vcc3v3_pcie_p: Looking up vin-supply from device tree
  454. [ 1.019474] vcc3v3_pcie_p: supplied by vcc_3v3
  455. [ 1.020406] reg-fixed-voltage vcc3v3_pcie_p: vcc3v3_pcie_p supplying 3300000uV
  456. [ 1.021381] vcc3v3_sd: will resolve supply early: vin
  457. [ 1.021829] reg-fixed-voltage vcc3v3_sd: Looking up vin-supply from device tree
  458. [ 1.022477] vcc3v3_sd: supplied by vcc_3v3
  459. [ 1.022844] vcc_3v3: could not add device link regulator.23: -ENOENT
  460. [ 1.023939] vcc3v3_sd: 3300 mV, enabled
  461. [ 1.024388] reg-fixed-voltage vcc3v3_sd: vcc3v3_sd supplying 3300000uV
  462. [ 1.025675] phy phy-fe8a0000.usb2-phy.4: Looking up phy-supply from device tree
  463. [ 1.026327] vcc5v0_usb20_host: could not add device link phy-fe8a0000.usb2-phy.4: -ENOENT
  464. [ 1.027203] phy phy-fe8a0000.usb2-phy.5: Looking up phy-supply from device tree
  465. [ 1.027861] boost: could not add device link phy-fe8a0000.usb2-phy.5: -ENOENT
  466. [ 1.029867] rockchip-dw-pcie 3c0000000.pcie: Looking up vpcie3v3-supply from device tree
  467. [ 1.030870] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
  468. [ 1.031613] rockchip-dw-pcie 3c0000000.pcie: Parsing ranges property...
  469. [ 1.032205] rockchip-dw-pcie 3c0000000.pcie: IO 0x033f700000..0x033f7fffff -> 0x007f700000
  470. [ 1.032981] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033f6fffff -> 0x0040000000
  471. [ 1.033776] rockchip-dw-pcie 3c0000000.pcie: invalid resource
  472. [ 1.034295] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled
  473. [ 1.034828] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound
  474. [ 1.067800] of_dma_request_slave_channel: dma-names property of node '/serial@fe650000' missing or empty
  475. [ 1.068643] dw-apb-uart fe650000.serial: failed to request DMA
  476. [ 1.103213] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  477. [ 1.151107] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  478. [ 1.153354] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  479. [ 1.155603] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  480. [ 1.159230] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  481. [ 1.222325] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
  482. [ 1.243064] rockchip-dw-pcie 3c0000000.pcie: Link up
  483. [ 1.243746] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
  484. [ 1.244372] pci_bus 0000:00: root bus resource [bus 00-0f]
  485. [ 1.244869] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x7f700000-0x7f7fffff])
  486. [ 1.245722] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33f6fffff] (bus address [0x40000000-0x7f6fffff])
  487. [ 1.246636] pci_bus 0000:00: scanning bus
  488. [ 1.247091] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
  489. [ 1.247669] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  490. [ 1.248382] pci 0000:00:00.0: supports D1 D2
  491. [ 1.248768] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  492. [ 1.249284] pci 0000:00:00.0: PME# disabled
  493. [ 1.254716] pci_bus 0000:00: fixups for bus
  494. [ 1.255154] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  495. [ 1.255949] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
  496. [ 1.256918] pci_bus 0000:01: scanning bus
  497. [ 1.257453] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
  498. [ 1.258117] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  499. [ 1.259772] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
  500. [ 1.275898] pci_bus 0000:01: fixups for bus
  501. [ 1.276293] pci_bus 0000:01: bus scan returning with max=01
  502. [ 1.276808] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  503. [ 1.277422] pci_bus 0000:00: bus scan returning with max=ff
  504. [ 1.277955] pci 0000:00:00.0: BAR 14: assigned [mem 0x300000000-0x3000fffff]
  505. [ 1.278597] pci 0000:00:00.0: BAR 6: assigned [mem 0x300100000-0x30010ffff pref]
  506. [ 1.279332] pci 0000:01:00.0: BAR 0: assigned [mem 0x300000000-0x300003fff 64bit]
  507. [ 1.280068] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  508. [ 1.280550] pci 0000:00:00.0: bridge window [mem 0x300000000-0x3000fffff]
  509. [ 1.281373] irq: no irq domain found for legacy-interrupt-controller !
  510. [ 1.281964] pcieport 0000:00:00.0: assign IRQ: got 0
  511. [ 1.287355] pcieport 0000:00:00.0: PME: Signaling with IRQ 76
  512. [ 1.288180] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x35661d87)
  513. [ 1.288921] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100507)
  514. [ 1.289637] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0x6040001)
  515. [ 1.290358] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10000)
  516. [ 1.291150] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x0)
  517. [ 1.291837] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
  518. [ 1.292516] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0xff0100)
  519. [ 1.293230] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0xf0)
  520. [ 1.293915] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x40004000)
  521. [ 1.294645] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
  522. [ 1.295378] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
  523. [ 1.296060] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
  524. [ 1.296738] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
  525. [ 1.297415] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x40)
  526. [ 1.298099] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
  527. [ 1.298777] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x20100)
  528. [ 1.300247] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
  529. [ 1.302320] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
  530. [ 1.304486] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
  531. [ 1.306560] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
  532. [ 1.308697] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
  533. [ 1.310762] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
  534. [ 1.312774] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
  535. [ 1.314865] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
  536. [ 1.317006] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
  537. [ 1.320603] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
  538. [ 1.321459] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
  539. [ 1.323060] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
  540. [ 1.323703] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
  541. [ 1.324218] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
  542. [ 1.324738] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  543. [ 1.325400] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
  544. [ 1.330983] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  545. [ 1.332032] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  546. [ 1.332665] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  547. [ 1.333122] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  548. [ 1.333778] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  549. [ 1.334431] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  550. [ 1.335069] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  551. [ 1.335695] rk_gmac-dwmac fe010000.ethernet: TSO supported
  552. [ 1.336180] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  553. [ 1.336883] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  554. [ 1.337412] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
  555. [ 1.338026] rk_gmac-dwmac fe010000.ethernet: Unbalanced pm_runtime_enable!
  556. [ 1.467274] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 220
  557. [ 1.472720] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  558. [ 1.475078] libphy: stmmac: probed
  559. [ 1.483722] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  560. [ 1.484270] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  561. [ 1.485203] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  562. [ 1.486197] xhci-hcd xhci-hcd.0.auto: irq 50, io mem 0xfcc00000
  563. [ 1.489663] hub 5-0:1.0: USB hub found
  564. [ 1.490120] hub 5-0:1.0: 1 port detected
  565. [ 1.491588] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  566. [ 1.492126] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  567. [ 1.492849] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  568. [ 1.493686] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  569. [ 1.496569] hub 6-0:1.0: USB hub found
  570. [ 1.497019] hub 6-0:1.0: 1 port detected
  571. [ 1.502753] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  572. [ 1.505121] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
  573. [ 1.505276] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  574. [ 1.505821] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
  575. [ 1.506940] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
  576. [ 1.506976] ALSA device list:
  577. [ 1.507607] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
  578. [ 1.507694] No soundcards found.
  579. [ 1.507812] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  580. [ 1.508765] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree
  581. [ 1.508828] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
  582. [ 1.511314] dw-apb-uart fe660000.serial: forbid DMA for kernel console
  583. [ 1.514049] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree
  584. [ 1.517641] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO
  585. [ 1.535465] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  586. [ 1.618322] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  587. [ 1.619362] mmc0: new high speed SDHC card at address aaaa
  588. [ 1.620905] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  589. [ 1.629590] GPT:Primary header thinks Alt. header is not at the end of the disk.
  590. [ 1.630254] GPT:16777215 != 62333951
  591. [ 1.630571] GPT:Alternate GPT header not at the end of the disk.
  592. [ 1.631118] GPT:16777215 != 62333951
  593. [ 1.631436] GPT: Use GNU Parted to correct GPT errors.
  594. [ 1.631917] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  595. [ 1.765553] random: crng init done
  596. [ 3.198982] Bluetooth: hci0: command 0x0c03 tx timeout
  597. [ 10.531598] ata1: softreset failed (1st FIS failed)
  598. [ 11.231073] Bluetooth: hci0: BCM: Reset failed (-110)
  599. [ 20.531421] ata1: softreset failed (1st FIS failed)
  600. [ 55.531516] ata1: softreset failed (1st FIS failed)
  601. [ 55.531991] ata1: limiting SATA link speed to 3.0 Gbps
  602. [ 56.007084] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
  603. [ 56.008886] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
  604. [ 56.009507] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
  605. [ 56.011463] ata1.00: configured for UDMA/133
  606. [ 56.012900] scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5
  607. [ 56.015860] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  608. [ 56.016560] sd 0:0:0:0: [sda] 4096-byte physical blocks
  609. [ 56.017142] sd 0:0:0:0: [sda] Write Protect is off
  610. [ 56.017586] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  611. [ 56.018234] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  612. [ 56.097560] sda: sda1 sda2 sda3
  613. [ 56.101527] sd 0:0:0:0: [sda] Attached SCSI disk
  614. [ 56.231487] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
  615. [ 56.232388] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
  616. [ 56.273156] devtmpfs: mounted
  617. [ 56.278438] Freeing unused kernel memory: 5888K
  618. [ 56.279033] Run /sbin/init as init process
  619. [ 56.279399] with arguments:
  620. [ 56.279661] /sbin/init
  621. [ 56.279902] with environment:
  622. [ 56.280178] HOME=/
  623. [ 56.280388] TERM=linux
  624. [ 57.674735] systemd[1]: System time before build time, advancing clock.
  625. [ 60.930788] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  626. [ 60.934755] systemd[1]: Detected architecture arm64.
  627. [ 61.049358] systemd[1]: Set hostname to <quartz64>.
  628. [ 61.975056] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  629. [ 61.976631] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  630. [ 62.431385] cfg80211: failed to load regulatory.db
  631. [ 62.758156] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  632. [ 62.772956] systemd[1]: Listening on udev Control Socket.
  633. [ 62.784240] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  634. [ 62.797630] systemd[1]: Listening on Journal Socket.
  635. [ 62.819651] systemd[1]: Starting Load Kernel Modules...
  636. [ 64.126870] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
  637. [ 64.238523] systemd-journald[179]: Received request to flush runtime journal from PID 1
  638. [ 66.424397] Adding 1000444k swap on /dev/sda3. Priority:-2 extents:1 across:1000444k
  639. [ 68.450000] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
  640. [ 70.193854] rk_gmac-dwmac fe010000.ethernet eth0: PHY [stmmac-1:00] driver [YT8511 Gigabit Ethernet] (irq=POLL)
  641. [ 70.196597] rk_gmac-dwmac fe010000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  642. [ 70.198298] dwmac4: Master AXI performs any burst length
  643. [ 70.198780] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features support found
  644. [ 70.199663] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  645. [ 70.200717] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
  646. [ 70.201867] rk_gmac-dwmac fe010000.ethernet eth0: configuring for phy/rgmii link mode
  647. [ 70.207130] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  648.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!