Rinkk

Engine swap.

Oct 27th, 2015
227
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.45 KB | None | 0 0
  1. [2015-10-26 20:02:11] [Output] : ★ Julio Lopez enters the 1996 Chevrolet Camaro, then turns the key into the ignition as he drives it
  2. [2015-10-26 20:02:28] [Output] : ★ over the car lift - pulling the key out after turning it back counter-clockwise and places t ((Julio Lopez))
  3. [2015-10-26 20:02:32] [Output] : ★ -he key into his mechanic jacket. ((Julio Lopez))
  4. [2015-10-26 20:03:32] [Output] : ★ Julio Lopez pulls a button inside the vehicle, opening up the vehicle's hood.
  5. [2015-10-26 20:04:00] [Output] : ★ Julio Lopez opens up the driver's door, then steps outside and heads towards the front side of the
  6. [2015-10-26 20:04:13] [Output] : ★ vehicle - opening up the hood by reaching his fingers under it, then supports the hood with ((Julio Lopez))
  7. [2015-10-26 20:04:15] [Output] : ★ the stands. ((Julio Lopez))
  8. [2015-10-26 21:02:09] [Output] : ★ Julio Lopez reaches for two boxes near the vehicle - one being a toolbox and the other one being
  9. [2015-10-26 21:02:28] [Output] : ★ a box filled with empty slots - a bolt organizer box. ((Julio Lopez))
  10. [2015-10-26 21:02:40] [Output] : ★ Julio Lopez places both of the boxes onto the ground near the front of the vehicle, then reaches
  11. [2015-10-26 21:02:56] [Output] : ★ into the toolbox and takes out a socket and ratchet, untightening the nuts on the battery's ((Julio Lopez))
  12. [2015-10-26 21:03:08] [Output] : ★ negative terminal and proceeds to remove the cable, then repeats the action for the positive ((Julio Lopez))
  13. [2015-10-26 21:03:18] [Output] : ★ cable after removing the plastic cover, then removes it as well. ((Julio Lopez))
  14. [2015-10-26 21:05:03] [Output] : ★ Julio Lopez then reaches for the battery handles and pulls it upwards - then places it onto the ground.
  15. [2015-10-26 21:05:21] [Output] : ★ Julio Lopez places back the socket and wrench into the toolbox, then reaches into his pocket for the
  16. [2015-10-26 21:05:32] [Output] : ★ lift remote; clicking a button as to raise the lift. ((Julio Lopez))
  17. [2015-10-26 21:06:13] [Output] : ★ Julio Lopez reaches for two medium-sized containers near the counter, placing one under the coolant
  18. [2015-10-26 21:06:25] [Output] : ★ and another one under the engine oil valve; proceeding to unscrew the valve as to drain ((Julio Lopez))
  19. [2015-10-26 21:06:29] [Output] : ★ both of them into the containers. ((Julio Lopez))
  20. [2015-10-26 21:07:06] [Output] : ★ There wouldn't be any glitter in the engine oil dripping from the vehicle. ((Julio Lopez))
  21. [2015-10-26 21:08:41] [Output] : ★ Julio Lopez pushes away the containers from under the vehicle towards the counter.
  22. [2015-10-26 21:08:54] [Output] : ★ Julio Lopez reaches into his mechanic's jacket pocket, taking out a lift remote and lowering the
  23. [2015-10-26 21:08:56] [Output] : ★ car again. ((Julio Lopez))
  24. [2015-10-26 21:09:07] [Output] : ★ Julio Lopez places back the clamps into the toolbox and reaches into it once more for a socket
  25. [2015-10-26 21:09:21] [Output] : ★ and wrench - removing the bolts holding down the radiator then placing the bolts into the ((Julio Lopez))
  26. [2015-10-26 21:09:34] [Output] : ★ bolt organizer in a space labeled "RAD" and places back the socket and ratchet into the ((Julio Lopez))
  27. [2015-10-26 21:09:50] [Output] : ★ toolbox, then removes the radiator entirely from the vehicle and leans it up onto the ((Julio Lopez))
  28. [2015-10-26 21:09:56] [Output] : ★ wall - away from the vehicle. ((Julio Lopez))
  29. [2015-10-26 21:10:43] [Output] : ★ Julio Lopez reaches into the hood once more as he aims towards the throttle cabl
  30. [2015-10-26 21:10:59] [Output] : ★ Julio Lopez then reaches into the toolbox and takes out the ratchet and socket once more, removing the
  31. [2015-10-26 21:11:08] [Output] : ★ bolts that hold the cable into the intake, then placing the bolts into the holder's second ((Julio Lopez))
  32. [2015-10-26 21:11:10] [Output] : ★ slot. ((Julio Lopez))
  33. [2015-10-26 21:11:22] [Output] : ★ Julio Lopez then pushes the intake out of the way.
  34. [2015-10-26 21:11:37] [Output] : ★ Julio Lopez reaches into the toolbox for a white small marker, marking the hood hinges to line
  35. [2015-10-26 21:11:49] [Output] : ★ up the hood properly once installed, as it is going to get uninstalled. ((Julio Lopez))
  36. [2015-10-26 21:11:58] [Output] : ★ Julio Lopez places back the marker into the toolbox, then reaches for the hood - lowering it and
  37. [2015-10-26 21:12:12] [Output] : ★ placing his hands under it for the bolts carefully - as not to scratch the fenders - then ((Julio Lopez))
  38. [2015-10-26 21:12:26] [Output] : ★ unscrews them as he removes the hood entirely from its position, and leans it onto ((Julio Lopez))
  39. [2015-10-26 21:12:31] [Output] : ★ the wall - next to the radiator. ((Julio Lopez))
  40. [2015-10-26 21:12:46] [Output] : ★ Julio Lopez unbolts the airbox using the socket and ratchet, then removes it and places it next to the
  41. [2015-10-26 21:12:48] [Output] : ★ other car parts. ((Julio Lopez))
  42. [2015-10-26 21:13:11] [Output] : ★ Julio Lopez proceeds to removing the wiring harness between the runners of the intake manifold.
  43. [2015-10-26 21:13:24] [Output] : ★ Julio Lopez turns his head towards the air compressor - disconnecting it and the power steering pump.
  44. [2015-10-26 21:13:40] [Output] : ★ Julio Lopez reaches for the three bolts on the power assembly - the bolts being of different sizes
  45. [2015-10-26 21:13:45] [Output] : ★ of two being 14mm, and one being 17mm. ((Julio Lopez))
  46. [2015-10-26 21:14:01] [Output] : ★ Julio Lopez proceeds to use the appropriate sockets, and removes the three bolts and places them
  47. [2015-10-26 21:14:06] [Output] : ★ into the bolt organizer as required. ((Julio Lopez))
  48. [2015-10-26 21:14:14] [Output] : ★ Julio Lopez proceeds to remove the pump from the engine and pushes it out of the way.
  49. [2015-10-26 21:14:31] [Output] : ★ There would be a fair amount of clearance between the harmonic balancer and the fender. ((Julio Lopez))
  50. [2015-10-26 21:14:47] [Output] : ★ Julio Lopez reaches for the impact gun in the toolbox, proceeding to remove the bolts holding the
  51. [2015-10-26 21:14:52] [Output] : ★ harmonic balancer into place. ((Julio Lopez))
  52. [2015-10-26 21:15:05] [Output] : ★ Julio Lopez pulls out the harmonic balancer and places it next to the vehicle parts near the wall.
  53. [2015-10-26 21:15:48] [Output] : ★ Julio Lopez threads back the bolt that held the harmonic balancer into place back in once more.
  54. [2015-10-26 21:16:18] [Output] : ★ Julio Lopez proceeds to reach for the exhaust pipe - disconnecting the bolts holding it with the impact
  55. [2015-10-26 21:16:33] [Output] : ★ guns as well. ((Julio Lopez))
  56. [2015-10-26 21:16:43] [Output] : ★ Julio Lopez places back the impact gun into the toolbox, then reaches for a hydro-jack near the counter
  57. [2015-10-26 21:17:06] [Output] : ★ as he pushes it under the transmission pan to push the transmission pan up,then pull it out. ((Julio Lopez))
  58. [2015-10-26 21:17:18] [Output] : ★ The cover hiding the drive plate would be obvious now. ((Julio Lopez))
  59. [2015-10-26 21:17:28] [Output] : ★ Julio Lopez pulls the plastic cover and places it next to the car parts near the wall.
  60. [2015-10-26 21:17:37] [Output] : ★ Julio Lopez turns his head once more to the now obvious torque converter, which was hidden by the
  61. [2015-10-26 21:17:39] [Output] : ★ plastic cover. ((Julio Lopez))
  62. [2015-10-26 21:17:57] [Output] : ★ Julio Lopez reaches into the toolbox for a small white paint marker - marking the torque converter and
  63. [2015-10-26 21:18:08] [Output] : ★ the driver plate so that they can be easily aligned later on. ((Julio Lopez))
  64. [2015-10-26 21:18:22] [Output] : ★ Julio Lopez places back the marker and takes out a socket with a ratchet as he starts to loosen up the
  65. [2015-10-26 21:18:24] [Output] : ★ spark plugs. ((Julio Lopez))
  66. [2015-10-26 21:18:43] [Output] : ★ Julio Lopez proceeds to place the socket and ratchet onto the bolts on the crank shaft and loosens them
  67. [2015-10-26 21:18:54] [Output] : ★ up from the torque converter, moving the converter with his other hand as he rotates it and ((Julio Lopez))
  68. [2015-10-26 21:19:08] [Output] : ★ removes the bolts from it accordingly - without much worry as the alignment can easily ((Julio Lopez))
  69. [2015-10-26 21:19:15] [Output] : ★ be set now due to it being marked. ((Julio Lopez))
  70. [2015-10-26 21:19:26] [Output] : ★ Julio Lopez then heads for the engine to transmission bolts as he starts loosening them up using
  71. [2015-10-26 21:19:29] [Output] : ★ the socket and ratchet. ((Julio Lopez))
  72. [2015-10-26 21:19:35] [Output] : ★ Julio Lopez removes the second grade 8 bolt undernear the cover entirely.
  73. [2015-10-26 21:19:44] [Output] : ★ Julio Lopez reaches for another jack near the counter, and reaches into the counter itself for a small
  74. [2015-10-26 21:20:20] [Output] : ★ block of wood which he adjusts onto the jack, then pushes it under the oil pan as to get ((Julio Lopez))
  75. [2015-10-26 21:20:27] [Output] : ★ clearance on the engine bolts to unscrew and remove them. ((Julio Lopez))
  76. [2015-10-26 21:20:40] [Output] : ★ Julio Lopez proceeds to remove the bolts and nut-set from the first engine mount near the hood.
  77. [2015-10-26 21:20:46] [Output] : ★ Julio Lopez places the bolts accordingly into the bolts organizer.
  78. [2015-10-26 21:20:55] [Output] : ★ Julio Lopez removes the bolts and nut sets on the second engine mount - near the fender this time.
  79. [2015-10-26 21:21:05] [Output] : ★ Julio Lopez removes the final engine to transmission bolt which has already been loosened earlier.
  80. [2015-10-26 21:21:15] [Output] : ★ As all the bolts have been removed - a small gap would appear between teh engine and ((Julio Lopez))
  81. [2015-10-26 21:21:18] [Output] : ★ the transmission. ((Julio Lopez))
  82. [2015-10-26 21:21:25] [Output] : ★ Julio Lopez reaches for a Goodyear Racing Crane near the counter as he moves it towards the
  83. [2015-10-26 21:21:27] [Output] : ★ left fender. ((Julio Lopez))
  84. [2015-10-26 21:21:38] [Output] : ★ Julio Lopez reaches for a chain from the counter, then ties up the chain around the intake runners
  85. [2015-10-26 21:21:42] [Output] : ★ and the exhaust manifold runners around the engine. ((Julio Lopez))
  86. [2015-10-26 21:21:53] [Output] : ★ Julio Lopez hooks up the chain to the crain - ensuring nothing is bound up by the chain.
  87. [2015-10-26 21:23:28] [Output] : ★ Julio Lopez double checks that there is nothing remaining still connected to the engine before heading
  88. [2015-10-26 21:23:30] [Output] : ★ towards the crane. ((Julio Lopez))
  89. [2015-10-26 21:23:39] [Output] : ★ Julio Lopez jacks up the crane until the tension starts to build on the chain, ensuring again nothing
  90. [2015-10-26 21:23:47] [Output] : ★ is binding by heading towards the engine himself after the tension had been built and ((Julio Lopez))
  91. [2015-10-26 21:24:06] [Output] : ★ moves the engine a bit - also separating it farther off from the transmission. ((Julio Lopez))
  92. [2015-10-26 21:25:17] [Output] : ★ Julio Lopez reaches for a prybar on the counter, then pushes it between the engine and transmission
  93. [2015-10-26 21:25:22] [Output] : ★ as to separate them further. ((Julio Lopez))
  94. [2015-10-26 21:25:34] [Output] : ★ Julio Lopez pumps the crane once more - still looking over carefully to ensure nothing is binding the
  95. [2015-10-26 21:25:35] [Output] : ★ engine. ((Julio Lopez))
  96. [2015-10-26 21:25:44] [Output] : ★ The drive plate would now be easily visible to Julio. ((Julio Lopez))
  97. [2015-10-26 21:25:54] [Output] : ★ Julio Lopez cranks up teh engine completely from the vehicle, then carefully pushes the crane
  98. [2015-10-26 21:26:11] [Output] : ★ away after ensuring the engine has enough leverage. ((Julio Lopez))
  99. [2015-10-26 21:26:19] [Output] : ★ Engine would now be completely removed from the vehicle. ((Julio Lopez))
  100. [2015-10-26 21:26:28] [Output] : ★ Julio Lopez reaches into his toolbox as he takes out the marker once more - drawing a paint line
  101. [2015-10-26 21:26:37] [Output] : ★ onto the retaining disk to recognize which way it faces when re-installed, and the ((Julio Lopez))
  102. [2015-10-26 21:26:39] [Output] : ★ way it aligns. ((Julio Lopez))
  103. [2015-10-26 21:26:52] [Output] : ★ Julio Lopez places back the marker and reaches for the impact gun as he starts removing the 6 bolts
  104. [2015-10-26 21:26:55] [Output] : ★ holding down the retaining disk. ((Julio Lopez))
  105. [2015-10-26 21:27:17] [Output] : ★ Julio Lopez removes the retaining ring and disk, to finally reveal the retaining plate.
  106. [2015-10-26 21:27:35] [Output] : ★ Julio Lopez places the retaining ring and disk onto the counter, then reaches for the marker once more
  107. [2015-10-26 21:27:46] [Output] : ★ in the toolbox as to paint the retaining plate and ring, to know which side faces out when ((Julio Lopez))
  108. [2015-10-26 21:27:50] [Output] : ★ re-installing. ((Julio Lopez))
  109. [2015-10-26 21:27:54] [Output] : ★ Julio Lopez removes the rear cover bolts using his hands.
  110. [2015-10-26 21:28:10] [Output] : ★ Julio Lopez reaches for the torque converter as he pushes it into its shaft then rotates it - ensuring
  111. [2015-10-26 21:28:36] [Output] : ★ it is set all the way back and very well seated after it stops while rotating three times. ((Julio Lopez))
  112. [2015-10-26 21:28:49] [Output] : ★ Stops once, Julio proceeds to continue rotating it again. Stops twice, proceeds to rotate it ((Julio Lopez))
  113. [2015-10-26 21:29:00] [Output] : ★ - stopping one last time after it's been completely seated. ((Julio Lopez))
  114. [2015-10-26 21:29:09] [Output] : ★ Julio Lopez reaches for the other crank holding a load leveler binded to the new engine.
  115. [2015-10-26 21:29:19] [Output] : ★ Julio Lopez torques up the drive plate to the crank shaft bolts - at 58 ft. pounds.
  116. [2015-10-26 21:29:29] [Output] : ★ Julio Lopez cranks up the load leveler to change the pitch of the engine - with tiny increments - as to
  117. [2015-10-26 21:29:35] [Output] : ★ adjust the engine's angle properly. ((Julio Lopez))
  118. [2015-10-26 21:29:52] [Output] : ★ Julio Lopez pushes the crank to the vehicle, then places his left hand onto the engine as he pushes it
  119. [2015-10-26 21:30:01] [Output] : ★ away while lowering it; aligning the engine as he lowers it. ((Julio Lopez))
  120. [2015-10-26 21:30:21] [Output] : ★ Julio Lopez proceeds to lower the crane very slowly while aligning the engine onto the transmission.
  121. [2015-10-26 21:30:31] [Output] : ★ Julio Lopez pauses a couple of t imes and looks over at the process carefully - ensuring the engine
  122. [2015-10-26 21:30:41] [Output] : ★ is not resting on anything while it is being lowered as not to break or damage anything. ((Julio Lopez))
  123. [2015-10-26 21:30:58] [Output] : ★ The white paint marks drawn earlier on the drive plate to torque converter are obvious. ((Julio Lopez))
  124. [2015-10-26 21:31:11] [Output] : ★ Julio Lopez spins the converter accordingly for both to line up as prior after lowering the engine
  125. [2015-10-26 21:31:14] [Output] : ★ entirely. ((Julio Lopez))
  126. [2015-10-26 21:31:25] [Output] : ★ Julio Lopez reaches into the toolbox as he pulls out two screwdrivers - feeding them through the
  127. [2015-10-26 21:31:35] [Output] : ★ transmission bolt holes to lever up the alignment for easier bolt installation later on. ((Julio Lopez))
  128. [2015-10-26 21:31:44] [Output] : ★ Julio Lopez adjusts the engine's position as to align it while using the screwdrivers as guidance, then
  129. [2015-10-26 21:31:52] [Output] : ★ removes the screwdrivers and places them back into the toolbox and places the bolts ((Julio Lopez))
  130. [2015-10-26 21:32:04] [Output] : ★ from the bolt organizer accordingly into place - holding the new engine onto the tranny. ((Julio Lopez))
  131. [2015-10-26 21:32:22] [Output] : ★ Julio Lopez screws the first bolt with a ratchet and socket - ensuring there is no resistance as he
  132. [2015-10-26 21:32:31] [Output] : ★ does so, still not completely screwing it as he lets it remain a bit loose. ((Julio Lopez))
  133. [2015-10-26 21:32:41] [Output] : ★ Julio Lopez installs the bolts holding the flex plate to the torque converter using the white marks also
  134. [2015-10-26 21:32:49] [Output] : ★ drawn on it from before, screwing the bolts to 13 ft. pounds. ((Julio Lopez))
  135. [2015-10-26 21:33:37] [Output] : ★ Julio Lopez looks over the installation, then reaches for a few bottles as he tops the new engine
  136. [2015-10-26 21:33:48] [Output] : ★ oil and coolant - this is after all the parts that were removed earlier have been re-install ((Julio Lopez))
  137. [2015-10-26 21:33:56] [Output] : ★ -ed in the typical reverse installation procedure. ((Julio Lopez))
  138. [2015-10-26 21:34:09] [Output] : ★ Julio Lopez reaches into the vehicle's driver seat - placing the key into the ignition as he turns it on
  139. [2015-10-26 21:34:12] [Output] : ★ to prime the fuel pump. ((Julio Lopez))
  140. [2015-10-26 21:34:20] [Output] : ★ Julio Lopez repeats this procedure a couple of times - turning it off and then on.
  141. [2015-10-26 21:34:49] [Output] : ★ Julio Lopez checks the vehicle hood for any leaks of the fuel as it is now primed iwth it; ensuring
  142. [2015-10-26 21:34:53] [Output] : ★ that no leak exists. ((Julio Lopez))
  143. [2015-10-26 21:35:09] [Output] : ★ Julio Lopez turns the vehicle on once more for fifteen minutes, then ensures that there are no leaks at
  144. [2015-10-26 21:35:10] [Output] : ★ the end. ((Julio Lopez))
Advertisement
Add Comment
Please, Sign In to add comment