Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 19
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Corsair Rev: 0 Prod: Voyager GTX
- Type: Hard Disk
- Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
- ... is now current device
- Scanning usb 0:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 3043 bytes read in 202 ms (14.6 KiB/s)
- select kernel
- 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
- 2: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest
- 3: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee
- 4: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee-memtest
- 5: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524
- 6: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest
- Enter choice: 1: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
- Retrieving file: /boot/initrd.img-4.18.0-rc8-1060-ayufan-g45828c4db727
- 6536522 bytes read in 565 ms (11 MiB/s)
- Retrieving file: /boot/vmlinuz-4.18.0-rc8-1060-ayufan-g45828c4db727
- 28656128 bytes read in 1475 ms (18.5 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 4
- Retrieving file: /boot/dtbs/4.18.0-rc8-1060-ayufan-g45828c4db727/rockchip/rk339b
- 54350 bytes read in 618 ms (85 KiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f58c8000, end f5f03d4a ... OK
- Loading Device Tree to 00000000f58b7000, end 00000000f58c744d ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3943404K/4061184K available (17532K kernel code, 1808K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f2040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002571] Console: colour dummy device 80x25
- [ 0.002995] console [tty0] enabled
- [ 0.003327] bootconsole [uart8250] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.0-rc8-1060-ayufan-g45828c4db727 (root@runner-8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3943404K/4061184K available (17532K kernel code, 1808K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f2040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f2050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002571] Console: colour dummy device 80x25
- [ 0.002995] console [tty0] enabled
- [ 0.003327] bootconsole [uart8250] disabled
- [ 0.003798] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.003834] pid_max: default: 32768 minimum: 301
- [ 0.003956] Security Framework initialized
- [ 0.006032] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
- [ 0.007081] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007172] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.007226] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.030644] ASID allocator initialised with 32768 entries
- [ 0.038639] Hierarchical SRCU implementation.
- [ 0.046760] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.047161] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.051362] EFI services will not be available.
- [ 0.059267] smp: Bringing up secondary CPUs ...
- [ 0.091487] Detected VIPT I-cache on CPU1
- [ 0.091524] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.091566] CPU1: using LPI pending table @0x00000000f1440000
- [ 0.091613] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.123566] Detected VIPT I-cache on CPU2
- [ 0.123594] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.123634] CPU2: using LPI pending table @0x00000000f1480000
- [ 0.123668] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.155668] Detected VIPT I-cache on CPU3
- [ 0.155695] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.155734] CPU3: using LPI pending table @0x00000000f1490000
- [ 0.155766] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.190339] CPU features: enabling workaround for EL2 vector hardening
- [ 0.190797] Detected PIPT I-cache on CPU4
- [ 0.192041] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.194568] CPU4: using LPI pending table @0x00000000f14d0000
- [ 0.195830] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.233958] Detected PIPT I-cache on CPU5
- [ 0.235148] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.237600] CPU5: using LPI pending table @0x00000000f1500000
- [ 0.238730] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.242538] smp: Brought up 1 node, 6 CPUs
- [ 0.242920] SMP: Total of 6 processors activated.
- [ 0.242956] CPU features: detected: GIC system register CPU interface
- [ 0.242983] CPU features: detected: 32-bit EL0 Support
- [ 0.333453] CPU: All CPU(s) started at EL2
- [ 0.333935] alternatives: patching kernel code
- [ 0.338068] devtmpfs: initialized
- [ 0.355814] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.356033] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.357893] xor: measuring software checksum speed
- [ 0.395214] 8regs : 1151.000 MB/sec
- [ 0.435397] 8regs_prefetch: 1026.000 MB/sec
- [ 0.475613] 32regs : 1415.000 MB/sec
- [ 0.515825] 32regs_prefetch: 1228.000 MB/sec
- [ 0.515849] xor: using function: 32regs (1415.000 MB/sec)
- [ 0.515893] pinctrl core: initialized pinctrl subsystem
- [ 0.519141] DMI not present or invalid.
- [ 0.521154] NET: Registered protocol family 16
- [ 0.525670] audit: initializing netlink subsys (disabled)
- [ 0.527980] audit: type=2000 audit(0.516:1): state=initialized audit_enabled1
- [ 0.533904] cpuidle: using governor menu
- [ 0.535437] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval__)
- [ 0.535676] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.551311] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.554675] Serial: AMBA PL011 UART driver
- [ 0.676628] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.680692] cryptd: max_cpu_qlen set to 1000
- [ 0.749240] raid6: int64x1 gen() 216 MB/s
- [ 0.818172] raid6: int64x1 xor() 218 MB/s
- [ 0.886927] raid6: int64x2 gen() 9 MB/s
- [ 0.954393] raid6: int64x2 xor() 299 MB/s
- [ 1.022781] raid6: int64x4 gen() 514 MB/s
- [ 1.091180] raid6: int64x4 xor() 382 MB/s
- [ 1.159695] raid6: int64x8 gen() 491 MB/s
- [ 1.228081] raid6: int64x8 xor() 375 MB/s
- [ 1.296516] raid6: neonx1 gen() 363 MB/s
- [ 1.364885] raid6: neonx1 xor() 426 MB/s
- [ 1.433352] raid6: neonx2 gen() 580 MB/s
- [ 1.501731] raid6: neonx2 xor() 603 MB/s
- [ 1.570109] raid6: neonx4 gen() 752 MB/s
- [ 1.638541] raid6: neonx4 xor() 722 MB/s
- [ 1.707019] raid6: neonx8 gen() 825 MB/s
- [ 1.775377] raid6: neonx8 xor() 767 MB/s
- [ 1.775399] raid6: using algorithm neonx8 gen() 825 MB/s
- [ 1.775418] raid6: .... xor() 767 MB/s, rmw enabled
- [ 1.775443] raid6: using neon recovery algorithm
- [ 1.778333] ACPI: Interpreter disabled.
- [ 1.781900] vcc3v3_pcie: supplied by dc_12v
- [ 1.784401] vcc_sys: supplied by dc_12v
- [ 1.788176] vgaarb: loaded
- [ 1.789418] SCSI subsystem initialized
- [ 1.790956] usbcore: registered new interface driver usbfs
- [ 1.791170] usbcore: registered new interface driver hub
- [ 1.791471] usbcore: registered new device driver usb
- [ 1.794054] media: Linux media interface: v0.10
- [ 1.794301] videodev: Linux video capture interface: v2.00
- [ 1.794716] pps_core: LinuxPPS API ver. 1 registered
- [ 1.794755] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.794828] PTP clock support registered
- [ 1.798040] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.799270] Bluetooth: Core ver 2.22
- [ 1.799444] NET: Registered protocol family 31
- [ 1.799470] Bluetooth: HCI device and connection manager initialized
- [ 1.799502] Bluetooth: HCI socket layer initialized
- [ 1.799529] Bluetooth: L2CAP socket layer initialized
- [ 1.799590] Bluetooth: SCO socket layer initialized
- [ 1.799639] NetLabel: Initializing
- [ 1.799657] NetLabel: domain hash size = 128
- [ 1.799673] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.799792] NetLabel: unlabeled traffic allowed by default
- [ 1.803206] clocksource: Switched to clocksource arch_sys_counter
- [ 1.803790] VFS: Disk quotas dquot_6.6.0
- [ 1.803934] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.804216] pnp: PnP ACPI: disabled
- [ 1.824881] NET: Registered protocol family 2
- [ 1.827720] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
- [ 1.827987] TCP established hash table entries: 32768 (order: 6, 262144 byte)
- [ 1.828623] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.829421] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.830065] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.830317] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.830717] NET: Registered protocol family 1
- [ 1.834767] RPC: Registered named UNIX socket transport module.
- [ 1.834812] RPC: Registered udp transport module.
- [ 1.834832] RPC: Registered tcp transport module.
- [ 1.834935] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.837324] Trying to unpack rootfs image as initramfs...
- [ 2.345879] Freeing initrd memory: 6380K
- [ 2.355598] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 2.358934] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 2.359869] kvm [1]: 8-bit VMID
- [ 2.362288] kvm [1]: vgic-v2@fff20000
- [ 2.363978] kvm [1]: GIC system register CPU interface enabled
- [ 2.366560] kvm [1]: vgic interrupt IRQ10
- [ 2.369339] kvm [1]: Hyp mode initialized successfully
- [ 2.394823] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 2.412854] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.415384] NFS: Registering the id_resolver key type
- [ 2.415608] Key type id_resolver registered
- [ 2.415627] Key type id_legacy registered
- [ 2.415658] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.415681] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 2.417627] fuse init (API version 7.27)
- [ 2.419508] 9p: Installing v9fs 9p2000 file system support
- [ 2.420707] pstore: using deflate compression
- [ 2.446390] NET: Registered protocol family 38
- [ 2.446778] Key type asymmetric registered
- [ 2.446799] Asymmetric key parser 'x509' registered
- [ 2.447701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 2.449108] io scheduler noop registered
- [ 2.449511] io scheduler cfq registered (default)
- [ 2.449548] io scheduler mq-deadline registered
- [ 2.449568] io scheduler kyber registered
- [ 2.458336] vcc5v0_host: supplied by vcc_sys
- [ 2.513002] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 2.513328] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 2.520482] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 2.520809] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 2.528862] pwm-regulator: supplied by vcc_sys
- [ 2.529937] vcc3v3_sys: supplied by vcc_sys
- [ 2.540170] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.545080] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud =A
- [ 2.547308] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud =A
- [ 2.656025] console [ttyS2] enabled
- [ 2.659667] SuperH (H)SCI(F) driver initialized
- [ 2.661463] msm_serial: driver initialized
- [ 2.683438] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 2.708672] brd: module loaded
- [ 2.725112] loop: module loaded
- [ 2.791990] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
- [ 2.792821] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
- [ 2.797286] m25p80 spi0.0: gd25q128 (16384 Kbytes)
- [ 2.809795] 3 fixed-partitions partitions found on MTD device spi0.0
- [ 2.810553] Creating 3 MTD partitions on "spi0.0":
- [ 2.811306] 0x000000000000-0x0000003f8000 : "loader"
- [ 2.815421] 0x0000003f8000-0x000000400000 : "env"
- [ 2.817737] 0x0000007c0000-0x000000800000 : "vendor"
- [ 2.825124] libphy: Fixed MDIO Bus: probed
- [ 2.828113] tun: Universal TUN/TAP device driver, 1.6
- [ 2.834281] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 2.835372] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 2.836161] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 2.836828] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 2.837522] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
- [ 2.838236] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 2.839895] sky2: driver version 1.30
- [ 2.844302] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 2.845364] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 2.846015] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 2.846535] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 2.847133] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 2.847801] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 2.853416] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 2.855939] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 2.856589] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 2.857066] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 2.857742] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 2.858419] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 2.858960] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 2.859597] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 2.860241] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 2.860780] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 2.861310] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 3.006412] libphy: stmmac: probed
- [ 3.006947] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 3.008072] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- [ 3.012678] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr
- [ 3.013600] usbcore: registered new interface driver pegasus
- [ 3.014185] usbcore: registered new interface driver rtl8150
- [ 3.015127] usbcore: registered new interface driver r8152
- [ 3.015739] usbcore: registered new interface driver asix
- [ 3.016300] usbcore: registered new interface driver ax88179_178a
- [ 3.016908] usbcore: registered new interface driver cdc_ether
- [ 3.017515] usbcore: registered new interface driver dm9601
- [ 3.018087] usbcore: registered new interface driver CoreChips
- [ 3.018692] usbcore: registered new interface driver smsc75xx
- [ 3.019350] usbcore: registered new interface driver smsc95xx
- [ 3.019946] usbcore: registered new interface driver net1080
- [ 3.020513] usbcore: registered new interface driver plusb
- [ 3.021071] usbcore: registered new interface driver cdc_subset
- [ 3.021662] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
- [ 3.022440] usbcore: registered new interface driver cdc_ncm
- [ 3.024090] VFIO - User Level meta-driver version: 0.3
- [ 3.028442] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
- [ 3.041405] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 3.049064] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
- [ 3.060401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.061163] ehci-pci: EHCI PCI platform driver
- [ 3.061696] ehci-platform: EHCI generic platform driver
- [ 3.064867] ehci-platform fe380000.usb: EHCI Host Controller
- [ 3.065426] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 3.069931] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 3.082969] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 3.085476] hub 1-0:1.0: USB hub found
- [ 3.085893] hub 1-0:1.0: 1 port detected
- [ 3.089884] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 3.090436] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 3.094044] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
- [ 3.107023] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 3.109256] hub 2-0:1.0: USB hub found
- [ 3.109642] hub 2-0:1.0: 1 port detected
- [ 3.111513] ehci-orion: EHCI orion driver
- [ 3.112276] ehci-exynos: EHCI EXYNOS driver
- [ 3.112936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.113646] ohci-pci: OHCI PCI platform driver
- [ 3.114296] ohci-platform: OHCI generic platform driver
- [ 3.116222] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 3.116861] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 3.120189] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 3.184615] hub 3-0:1.0: USB hub found
- [ 3.185051] hub 3-0:1.0: 1 port detected
- [ 3.186649] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 3.187337] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 3.189163] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
- [ 3.252364] hub 4-0:1.0: USB hub found
- [ 3.252753] hub 4-0:1.0: 1 port detected
- [ 3.254759] ohci-exynos: OHCI EXYNOS driver
- [ 3.256882] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.257435] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 3.262022] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 3.263080] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
- [ 3.265825] hub 5-0:1.0: USB hub found
- [ 3.266253] hub 5-0:1.0: 1 port detected
- [ 3.267296] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.267832] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 3.268543] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 3.269247] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 3.271286] hub 6-0:1.0: USB hub found
- [ 3.271668] hub 6-0:1.0: 1 port detected
- [ 3.272854] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.273381] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 3.279458] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 3.280458] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
- [ 3.283028] hub 7-0:1.0: USB hub found
- [ 3.283414] hub 7-0:1.0: 1 port detected
- [ 3.284532] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.285048] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 3.285757] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 3.286444] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 3.288443] hub 8-0:1.0: USB hub found
- [ 3.288828] hub 8-0:1.0: 1 port detected
- [ 3.291192] usbcore: registered new interface driver usb-storage
- [ 3.300964] i2c /dev entries driver
- [ 3.312417] rk808 0-001b: chip id: 0x0
- [ 3.318860] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 3.319851] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 3.320531] DCDC_REG1: supplied by vcc_sys
- [ 3.322057] DCDC_REG2: supplied by vcc_sys
- [ 3.323243] DCDC_REG3: supplied by vcc_sys
- [ 3.323931] DCDC_REG4: supplied by vcc_sys
- [ 3.324960] LDO_REG1: supplied by vcc_sys
- [ 3.326668] LDO_REG2: supplied by vcc_sys
- [ 3.328324] LDO_REG3: supplied by vcc_sys
- [ 3.329820] LDO_REG4: supplied by vcc_sys
- [ 3.330417] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
- [ 3.332183] LDO_REG5: supplied by vcc_sys
- [ 3.333601] LDO_REG6: supplied by vcc_sys
- [ 3.335251] LDO_REG7: supplied by vcc_sys
- [ 3.336695] LDO_REG8: supplied by vcc_sys
- [ 3.338174] SWITCH_REG1: supplied by vcc3v3_sys
- [ 3.339147] SWITCH_REG2: supplied by vcc3v3_sys
- [ 3.344950] rk808-rtc rk808-rtc: registered as rtc0
- [ 3.346554] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 3.347331] fan53555-reg: supplied by vcc_sys
- [ 3.349005] vcc1v8_s3: supplied by vcc_1v8
- [ 3.350439] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
- [ 3.351157] fan53555-reg: supplied by vcc_sys
- [ 3.352844] random: fast init done
- [ 3.361122] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 3.366629] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 3.381419] Bluetooth: HCI UART driver ver 2.3
- [ 3.387676] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 Kz
- [ 3.389858] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changez
- [ 3.391877] sdhci: Secure Digital Host Controller Interface driver
- [ 3.392434] sdhci: Copyright(c) Pierre Ossman
- [ 3.393070] Synopsys Designware Multimedia Card Interface Driver
- [ 3.394631] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
- [ 3.395473] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 3.396079] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 3.396635] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
- [ 3.397629] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
- [ 3.398234] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
- [ 3.411051] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 3.425251] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.428487] mmc1: CQHCI version 5.10
- [ 3.455016] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 3.460309] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.462817] usbcore: registered new interface driver usbhid
- [ 3.463359] usbhid: USB HID core driver
- [ 3.472644] xt_time: kernel timezone is -0000
- [ 3.473068] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
- [ 3.473837] IPVS: Connection hash table configured (size=4096, memory=64Kbyt)
- [ 3.474711] IPVS: ipvs loaded.
- [ 3.475002] IPVS: [rr] scheduler registered.
- [ 3.475381] IPVS: [wrr] scheduler registered.
- [ 3.475768] IPVS: [lc] scheduler registered.
- [ 3.476146] IPVS: [wlc] scheduler registered.
- [ 3.476532] IPVS: [fo] scheduler registered.
- [ 3.476910] IPVS: [ovf] scheduler registered.
- [ 3.477301] IPVS: [lblc] scheduler registered.
- [ 3.477700] IPVS: [lblcr] scheduler registered.
- [ 3.478100] IPVS: [dh] scheduler registered.
- [ 3.478552] IPVS: [sh] scheduler registered.
- [ 3.478991] IPVS: [sed] scheduler registered.
- [ 3.479377] IPVS: [nq] scheduler registered.
- [ 3.480077] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- [ 3.480687] Initializing XFRM netlink socket
- [ 3.481491] NET: Registered protocol family 10
- [ 3.482572] Segment Routing with IPv6
- [ 3.483212] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 3.484108] NET: Registered protocol family 17
- [ 3.484537] bridge: filtering via arp/ip/ip6tables is no longer available by.
- [ 3.485791] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.486318] Bluetooth: HIDP socket layer initialized
- [ 3.486791] 8021q: 802.1Q VLAN Support v1.8
- [ 3.487203] 9pnet: Installing 9P2000 support
- [ 3.487632] Key type dns_resolver registered
- [ 3.488751] registered taskstats version 1
- [ 3.489868] Btrfs loaded, crc32c=crc32c-arm64-ce
- [ 3.508435] rk808-rtc rk808-rtc: setting system clock to 2018-09-19 14:31:19)
- [ 3.509205] of_cfs_init
- [ 3.509448] of_cfs_init: OK
- [ 3.509923] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 3.510684] cfg80211: failed to load regulatory.db
- [ 3.511340] vcc3v3_pcie: disabling
- [ 3.511662] ALSA device list:
- [ 3.511928] No soundcards found.
- [ 3.512522] ttyS2 - failed to request DMA
- [ 3.513322] Freeing unused kernel memory: 1408K
- Loading, please wait...
- starting version 237
- [ 3.618915] usb 7-1: new high-speed USB device number 2 using xhci-hcd
- [ 3.761517] iommu: Adding device ff8f0000.vop to group 0
- [ 3.762148] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
- [ 3.764436] iommu: Adding device ff900000.vop to group 1
- [ 3.765073] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
- [ 3.769015] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000p
- [ 3.769689] rockchip-drm display-subsystem: Linked as a consumer to ff900000p
- [ 3.770677] rockchip-drm display-subsystem: Linked as a consumer to ff940000i
- [ 3.773616] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_comp)
- [ 3.776115] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_comp)
- [ 3.777268] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
- [ 3.780851] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi)
- [ 3.781691] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 3.782269] [drm] No driver support for vblank timestamp query.
- [ 3.830671] hub 7-1:1.0: USB hub found
- [ 3.830814] hub 7-1:1.0: 4 ports detected
- [ 3.853588] Console: switching to colour frame buffer device 240x67
- [ 3.885946] rockchip-drm display-subsystem: fb0: frame buffer device
- [ 3.895054] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 3.907456] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 0
- [ 3.942736] hub 8-1:1.0: USB hub found
- [ 3.943393] hub 8-1:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- [ 4.822978] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hd
- [ 4.865673] scsi host0: uas
- [ 4.866602] scsi 0:0:0:0: Direct-Access Corsair Voyager GTX 0 P6
- [ 4.868773] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119)
- [ 4.869947] usbcore: registered new interface driver uas
- [ 4.869972] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.871679] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 4.872954] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea2
- [ 4.874046] xhci-hcd xhci-hcd.1.auto: @00000000f7116be0 00000000 00000000 1b1
- [ 4.879529] GPT:Primary header thinks Alt. header is not at the end of the d.
- [ 4.880373] GPT:60620799 != 250069679
- [ 4.880780] GPT:Alternate GPT header not at the end of the disk.
- [ 4.881439] GPT:60620799 != 250069679
- [ 4.881846] GPT: Use GNU Parted to correct GPT errors.
- [ 4.882443] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
- [ 4.885221] sd 0:0:0:0: [sda] Attached SCSI disk
- Warning: fsck not present, so skipping root file system
- [ 4.972275] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opt)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 5.163511] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SE)
- [ 5.166346] systemd[1]: Detected architecture arm64.
- Welcome to Ubuntu 18.04.1 LTS!
- [ 5.183575] systemd[1]: Set hostname to <rockpro64v_2_1>.
- [ 5.283605] systemd[1]: File /lib/systemd/system/systemd-journald.service:36.
- [ 5.285457] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warn)
- [ 5.412109] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.412949] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 5.423100] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.424034] systemd[1]: Reached target System Time Synchronized.
- [ OK ] Reached target System Time Synchronized.
- [ 5.435037] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.436199] systemd[1]: Started Dispatch Password Requests to Console Direct.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ 5.447149] systemd[1]: Started ntp-systemd-netif.path.
- [ OK ] Started ntp-systemd-netif.path.
- [ 5.460110] systemd[1]: Created slice System Slice.
- [ OK ] Created slice System Slice.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Socket.
- Starting Remount Root and Kernel File Systems...
- Mounting RPC Pipe File System...
- Starting Set the console keyboard layout...
- Mounting POSIX Message Queue File System...
- Mounting Kernel Debug File System...
- Starting Load Kernel Modules...
- [ OK ] Listening on udev Kernel Socket.
- Starting Create list of required st��…ce nodes for the current kernel..
- Mounting NFSD configuration filesystem...
- [ OK ] Listening on Journal Audit Socket.
- Starting Restore / save the current clock...
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- Starting Nameserver information manager...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on RPCbind Server Activation Socket.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- Mounting Huge Pages File System...
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted RPC Pipe File System.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Journal Service.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Create list of required sta��…vice nodes for the current kerne.
- [ OK ] Mounted NFSD configuration filesystem.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Nameserver information manager.
- [ OK ] Reached target Network (Pre).
- Starting Create Static Device Nodes in /dev...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- Mounting FUSE Control File System...
- Starting pNFS block layout mapping daemon...
- Starting Load/Save Random Seed...
- [ 6.043271] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea2
- [ 6.044195] xhci-hcd xhci-hcd.1.auto: @00000000f7116920 00000000 00000000 1b0
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started pNFS block layout mapping daemon.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Reached target Local File Systems (Pre).
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- Starting Network Service...
- [ OK ] Started Network Service.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Found device /dev/ttyS2.
- [ 6.456921] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff8800
- [ 6.459406] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
- [ 6.462645] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) frl
- [ 6.466882] es8316 1-0010: Error applying setting, reverse things back
- [ OK ] Found device Corsair_Voyager_GTX boot.
- Mounting /boot/efi...
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Mounted /boot/efi.
- [ OK ] Reached target Local File Systems.
- Starting Create Volatile Files and Directories...
- Starting Raise network interfaces...
- Starting Preprocess NFS configuration...
- Starting Set console font and keymap...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Preprocess NFS configuration.
- [ OK ] Started Set console font and keymap.
- [ OK ] Reached target NFS client services.
- Starting NFSv4 ID-name mapping service...
- Starting Network Time Synchronization...
- Starting RPC bind portmap service...
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Name Resolution...
- [ OK ] Started RPC bind portmap service.
- [ OK ] Started Raise network interfaces.
- [ 6.974951] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
- [ OK ] Started NFSv4 ID-name mapping service.
- [ OK ] Reached target RPC Port Mapper.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Message of the Day.
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started resolvconf-pull-resolved.path.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Basic System.
- Starting Initializes zram swaping...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- [ OK ] Started ntp-systemd-netif.service.
- [ OK ] Started Regular background program processing daemon.
- Starting Dispatcher daemon for systemd-networkd...
- Starting Login Service...
- Starting WPA supplicant...
- Starting Resets System Activity Data Collector...
- Starting System Logging Service...
- Starting Rock 64 First boot...
- [ OK ] Started Set the CPU Frequency Scaling governor.
- Starting Generate SSH keys if not there...
- Starting resolvconf-pull-resolved.service...
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target Timers.
- [ OK ] Started Network Name Resolution.
- [ OK ] Started System Logging Service.
- [FAILED] Failed to start Initializes zram swaping.
- See 'systemctl status zram-config.service' for details.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started Rock 64 First boot.
- [ OK ] Started Generate SSH keys if not there.
- [ OK ] Started resolvconf-pull-resolved.service.
- [ OK ] Started Login Service.
- [ OK ] Started WPA supplicant.
- Starting Hostname Service...
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Started Hostname Service.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- Starting NFS Mount Daemon...
- Starting OpenBSD Secure Shell server...
- [ OK ] Started NFS Mount Daemon.
- Starting Network Manager Script Dispatcher Service...
- Starting NFS server and services...
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started NFS server and services.
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems.
- Starting Permit User Sessions...
- [ OK ] Started Permit User Sessions.
- Starting Authorization Manager...
- [ OK ] Started Serial Getty on ttyS2.
- Starting Set console scheme...
- [ OK ] Started Set console scheme.
- [ OK ] Started Authorization Manager.
- [ OK ] Started Dispatcher daemon for systemd-networkd.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 18.04.1 LTS rockpro64v_2_1 ttyS2
- rockpro64v_2_1 login: [ 9.656762] xhci-hcd xhci-hcd.1.auto: ERROR Transfer e3
- [ 9.657686] xhci-hcd xhci-hcd.1.auto: @00000000f7116180 00000000 00000000 1b1
- Stopping Session 2 of user rock64.
- [ OK ] Stopped target RPC Port Mapper.
- [ OK ] Stopped target Graphical Interface.
- [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
- Stopping pNFS block layout mapping daemon...
- [ OK ] Stopped target Host and Network Name Lookups.
- [ OK ] Stopped target Multi-User System.
- [ OK ] Stopp Stopping Regular background program processing daemon...
- [ OK ] Stopped pNFS block layout mapping daemon.
- [ OK ] Stopped Regular background program processing daemon.
- [ OK ] Stopped Dispatcher daemon for systemd-networkd.
- [ OK ] Stopped System Logging Service.
- [ OK ] Stopped OpenBSD Secure Shell server.
- [ OK ] Stopped Authorization Manager.
- [ OK ] Stopped Serial Getty on ttyS2.
- [ OK ] Stopped Getty on tty1.
- [ OK ] Stopped User Manager for UID 1000.
- [ OK ] Stopped Session 2 of user rock64.
- [ OK ] Removed slice User Slice of rock64.
- Stopping Login Service...
- [ OK ] Removed slice system-getty.slice.
- [ OK ] Removed slice system-serial\x2dgetty.slice.
- Stopping Permit User Sessions...
- [ OK ] Stopped Generate SSH keys if not there.
- [ OK ] Stopped Login Service.
- [ OK ] Stopped Permit User Sessions.
- [ OK ] Stopped target Remote File Systems.
- [ OK ] Stopped target Remote File Systems (Pre).
- [ OK ] Stopped target NFS client services.
- Stopping NFS server and services...
- [ OK ] Stopped NFS server and services.
- Stopping NFS Mount Daemon...
- Stopping NFSv4 ID-name mapping service...
- [ OK ] Stopped NFSv4 ID-name mapping service.
- [ OK ] Stopped NFS Mount Daemon.
- [ OK ] Stopped target Network.
- Stopping Network Name Resolution...
- Stopping WPA supplicant...
- Stopping Raise network interfaces...
- Stopping Network Manager...
- Unmounting RPC Pipe File System...
- [ OK ] Stopped Network Name Resolution.
- [ OK ] Stopped WPA supplicant.
- [ OK ] Stopped Raise network interfaces.
- [ OK ] Unmounted RPC Pipe File System.
- Stopping Network Service...
- [ OK ] Stopped Network Manager.
- [ OK ] Stopped Network Service.
- Stopping D-Bus System Message Bus...
- [ OK ] Stopped target Network (Pre).
- [ OK ] Stopped D-Bus System Message Bus.
- [ OK ] Stopped target Basic System.
- [ OK ] Stopped target Paths.
- [ OK ] Stopped resolvconf-pull-resolved.path.
- [ OK ] Stopped target Sockets.
- [ OK ] Closed Syslog Socket.
- [ OK ] Stopped target Slices.
- [ OK ] Removed slice User and Session Slice.
- [ OK ] Closed D-Bus System Message Bus Socket.
- [ OK ] Stopped target System Initialization.
- [ OK ] Stopped target Local Encrypted Volumes.
- [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
- [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
- Stopping Restore / save the current clock...
- [ OK ] Stopped Apply Kernel Variables.
- Stopping Update UTMP about System Boot/Shutdown...
- Stopping Network Time Synchronization...
- [ OK ] Stopped Load Kernel Modules.
- Stopping Load/Save Random Seed...
- [ OK ] Stopped Network Time Synchronization.
- [ OK ] Stopped Restore / save the current clock.
- [ OK ] Stopped Load/Save Random Seed.
- [ OK ] Stopped Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Create Volatile Files and Directories.
- [ OK ] Stopped target Local File Systems.
- Unmounting /run/user/1000...
- Unmounting /boot/efi...
- [ OK ] Unmounted /run/user/1000.
- [ OK ] Stopped target Swap.
- [ OK ] Unmounted /boot/efi.
- [ OK ] Reached target Unmount All Filesystems.
- [ OK ] Stopped target Local File Systems (Pre).
- [ OK ] Stopped Create Static Device Nodes in /dev.
- [ OK ] Stopped Remount Root and Kernel File Systems.
- [ OK ] Reached target Shutdown.
- [ OK ] Reached target Final Step.
- Starting Reboot...
- [ 3913.831675] reboot: Restarting system
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- DDR Version 1.13 20180801
- In
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 20
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Corsair Rev: 0 Prod: Voyager GTX
- Type: Hard Disk
- Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
- ... is now current device
- Scanning usb 0:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 3933 bytes read in 203 ms (18.6 KiB/s)
- select kernel
- 1: kernel-4.18.8-77394-g8cce48cacf88
- 2: kernel-4.18.8-77394-g8cce48cacf88-memtest
- 3: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
- 4: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest
- 5: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee
- 6: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee-memtest
- 7: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524
- 8: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest
- Enter choice: 1: kernel-4.18.8-77394-g8cce48cacf88
- Retrieving file: /boot/initrd.img-4.18.8-77394-g8cce48cacf88
- 23870441 bytes read in 1382 ms (16.5 MiB/s)
- Retrieving file: /boot/vmlinuz-4.18.8-77394-g8cce48cacf88
- 29178368 bytes read in 1578 ms (17.6 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 4
- Retrieving file: /boot/dtbs/4.18.8-77394-g8cce48cacf88/rockchip/rk3399-rockpro6b
- 54350 bytes read in 638 ms (83 KiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f4840000, end f5f03be9 ... OK
- Loading Device Tree to 00000000f482f000, end 00000000f483f44d ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f1040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f1050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002574] Console: colour dummy device 80x25
- [ 0.002997] console [tty0] enabled
- [ 0.003328] bootconsole [uart8250] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f1040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f1050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002574] Console: colour dummy device 80x25
- [ 0.002997] console [tty0] enabled
- [ 0.003328] bootconsole [uart8250] disabled
- [ 0.003801] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.003837] pid_max: default: 32768 minimum: 301
- [ 0.003959] Security Framework initialized
- [ 0.006036] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
- [ 0.007094] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007188] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.007241] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.030646] ASID allocator initialised with 32768 entries
- [ 0.038639] Hierarchical SRCU implementation.
- [ 0.046761] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.047166] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.051377] EFI services will not be available.
- [ 0.059282] smp: Bringing up secondary CPUs ...
- [ 0.091498] Detected VIPT I-cache on CPU1
- [ 0.091536] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.091579] CPU1: using LPI pending table @0x00000000f0440000
- [ 0.091625] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.123577] Detected VIPT I-cache on CPU2
- [ 0.123605] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.123646] CPU2: using LPI pending table @0x00000000f0480000
- [ 0.123680] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.155674] Detected VIPT I-cache on CPU3
- [ 0.155701] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.155740] CPU3: using LPI pending table @0x00000000f0490000
- [ 0.155771] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.190341] CPU features: enabling workaround for EL2 vector hardening
- [ 0.190805] Detected PIPT I-cache on CPU4
- [ 0.192082] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.194611] CPU4: using LPI pending table @0x00000000f04d0000
- [ 0.195824] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.233976] Detected PIPT I-cache on CPU5
- [ 0.235177] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.237764] CPU5: using LPI pending table @0x00000000f0500000
- [ 0.238915] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.244099] smp: Brought up 1 node, 6 CPUs
- [ 0.244574] SMP: Total of 6 processors activated.
- [ 0.244610] CPU features: detected: GIC system register CPU interface
- [ 0.244636] CPU features: detected: 32-bit EL0 Support
- [ 0.335548] CPU: All CPU(s) started at EL2
- [ 0.335998] alternatives: patching kernel code
- [ 0.340508] devtmpfs: initialized
- [ 0.358412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.358611] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.360916] xor: measuring software checksum speed
- [ 0.400922] 8regs : 1151.000 MB/sec
- [ 0.441111] 8regs_prefetch: 1026.000 MB/sec
- [ 0.481348] 32regs : 1416.000 MB/sec
- [ 0.521562] 32regs_prefetch: 1190.000 MB/sec
- [ 0.521583] xor: using function: 32regs (1416.000 MB/sec)
- [ 0.521635] pinctrl core: initialized pinctrl subsystem
- [ 0.525181] DMI not present or invalid.
- [ 0.527167] NET: Registered protocol family 16
- [ 0.531635] audit: initializing netlink subsys (disabled)
- [ 0.534093] audit: type=2000 audit(0.524:1): state=initialized audit_enabled1
- [ 0.540864] cpuidle: using governor menu
- [ 0.542711] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval__)
- [ 0.542914] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.553407] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.556703] Serial: AMBA PL011 UART driver
- [ 0.683748] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.686196] cryptd: max_cpu_qlen set to 1000
- [ 0.756172] raid6: int64x1 gen() 216 MB/s
- [ 0.825074] raid6: int64x1 xor() 231 MB/s
- [ 0.899195] raid6: int64x2 gen() 10 MB/s
- [ 0.968588] raid6: int64x2 xor() 8 MB/s
- [ 1.033608] raid6: int64x4 gen() 515 MB/s
- [ 1.102033] raid6: int64x4 xor() 381 MB/s
- [ 1.170564] raid6: int64x8 gen() 491 MB/s
- [ 1.238968] raid6: int64x8 xor() 375 MB/s
- [ 1.307549] raid6: neonx1 gen() 363 MB/s
- [ 1.375936] raid6: neonx1 xor() 425 MB/s
- [ 1.444360] raid6: neonx2 gen() 578 MB/s
- [ 1.512818] raid6: neonx2 xor() 602 MB/s
- [ 1.581318] raid6: neonx4 gen() 751 MB/s
- [ 1.649757] raid6: neonx4 xor() 721 MB/s
- [ 1.718258] raid6: neonx8 gen() 824 MB/s
- [ 1.786686] raid6: neonx8 xor() 766 MB/s
- [ 1.786711] raid6: using algorithm neonx8 gen() 824 MB/s
- [ 1.786731] raid6: .... xor() 766 MB/s, rmw enabled
- [ 1.786762] raid6: using neon recovery algorithm
- [ 1.788595] ACPI: Interpreter disabled.
- [ 1.792316] vcc3v3_pcie: supplied by dc_12v
- [ 1.794501] vcc_sys: supplied by dc_12v
- [ 1.798663] vgaarb: loaded
- [ 1.800173] SCSI subsystem initialized
- [ 1.801478] usbcore: registered new interface driver usbfs
- [ 1.801607] usbcore: registered new interface driver hub
- [ 1.801961] usbcore: registered new device driver usb
- [ 1.805378] media: Linux media interface: v0.10
- [ 1.805598] videodev: Linux video capture interface: v2.00
- [ 1.805884] pps_core: LinuxPPS API ver. 1 registered
- [ 1.805948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.806012] PTP clock support registered
- [ 1.808508] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.809683] Bluetooth: Core ver 2.22
- [ 1.809853] NET: Registered protocol family 31
- [ 1.809874] Bluetooth: HCI device and connection manager initialized
- [ 1.809920] Bluetooth: HCI socket layer initialized
- [ 1.809944] Bluetooth: L2CAP socket layer initialized
- [ 1.810007] Bluetooth: SCO socket layer initialized
- [ 1.810069] NetLabel: Initializing
- [ 1.810085] NetLabel: domain hash size = 128
- [ 1.810101] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.810245] NetLabel: unlabeled traffic allowed by default
- [ 1.814393] clocksource: Switched to clocksource arch_sys_counter
- [ 1.815203] VFS: Disk quotas dquot_6.6.0
- [ 1.815321] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.815676] pnp: PnP ACPI: disabled
- [ 1.835410] NET: Registered protocol family 2
- [ 1.837637] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
- [ 1.837966] TCP established hash table entries: 32768 (order: 6, 262144 byte)
- [ 1.839049] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.839895] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.840633] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.840872] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.841343] NET: Registered protocol family 1
- [ 1.846344] RPC: Registered named UNIX socket transport module.
- [ 1.846371] RPC: Registered udp transport module.
- [ 1.846389] RPC: Registered tcp transport module.
- [ 1.846407] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.849910] Trying to unpack rootfs image as initramfs...
- [ 3.815531] Freeing initrd memory: 23308K
- [ 3.826314] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 3.829707] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 3.830804] kvm [1]: 8-bit VMID
- [ 3.833298] kvm [1]: vgic-v2@fff20000
- [ 3.835189] kvm [1]: GIC system register CPU interface enabled
- [ 3.837196] kvm [1]: vgic interrupt IRQ10
- [ 3.840418] kvm [1]: Hyp mode initialized successfully
- [ 3.875897] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 3.892648] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.895248] NFS: Registering the id_resolver key type
- [ 3.895473] Key type id_resolver registered
- [ 3.895492] Key type id_legacy registered
- [ 3.895521] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.895543] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 3.897354] fuse init (API version 7.27)
- [ 3.899200] 9p: Installing v9fs 9p2000 file system support
- [ 3.900502] pstore: using deflate compression
- [ 3.966597] NET: Registered protocol family 38
- [ 3.967075] Key type asymmetric registered
- [ 3.967097] Asymmetric key parser 'x509' registered
- [ 3.967880] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 3.969696] io scheduler noop registered
- [ 3.969717] io scheduler deadline registered
- [ 3.970565] io scheduler cfq registered (default)
- [ 3.970600] io scheduler mq-deadline registered
- [ 3.970619] io scheduler kyber registered
- [ 3.980117] vcc5v0_host: supplied by vcc_sys
- [ 4.032483] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 4.032821] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 4.037758] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 4.038194] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 4.047977] pwm-regulator: supplied by vcc_sys
- [ 4.048923] vcc3v3_sys: supplied by vcc_sys
- [ 4.060555] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 4.066048] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud =A
- [ 4.068406] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud =A
- [ 4.177940] console [ttyS2] enabled
- [ 4.181127] SuperH (H)SCI(F) driver initialized
- [ 4.183198] msm_serial: driver initialized
- [ 4.204025] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 4.229799] brd: module loaded
- [ 4.247151] loop: module loaded
- [ 4.298225] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
- [ 4.299553] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
- [ 4.310688] m25p80 spi0.0: gd25q128 (16384 Kbytes)
- [ 4.323258] 3 fixed-partitions partitions found on MTD device spi0.0
- [ 4.323995] Creating 3 MTD partitions on "spi0.0":
- [ 4.324450] 0x000000000000-0x0000003f8000 : "loader"
- [ 4.327489] 0x0000003f8000-0x000000400000 : "env"
- [ 4.329895] 0x0000007c0000-0x000000800000 : "vendor"
- [ 4.333733] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 4.344578] libphy: Fixed MDIO Bus: probed
- [ 4.348284] tun: Universal TUN/TAP device driver, 1.6
- [ 4.354078] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.354960] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.355730] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 4.356373] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.357026] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
- [ 4.357735] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 4.359263] sky2: driver version 1.30
- [ 4.363172] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 4.364119] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 4.364764] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 4.365283] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 4.365803] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 4.366451] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 4.372017] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 4.374256] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 4.374924] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 4.375403] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 4.376080] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 4.376757] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 4.377233] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 4.377869] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 4.378616] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 4.379156] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 4.379687] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 4.486300] libphy: stmmac: probed
- [ 4.486810] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 4.487938] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- [ 4.492369] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr
- [ 4.493435] usbcore: registered new interface driver pegasus
- [ 4.494050] usbcore: registered new interface driver rtl8150
- [ 4.494744] usbcore: registered new interface driver r8152
- [ 4.495353] usbcore: registered new interface driver asix
- [ 4.495917] usbcore: registered new interface driver ax88179_178a
- [ 4.496527] usbcore: registered new interface driver cdc_ether
- [ 4.497115] usbcore: registered new interface driver dm9601
- [ 4.497698] usbcore: registered new interface driver CoreChips
- [ 4.498458] usbcore: registered new interface driver smsc75xx
- [ 4.499050] usbcore: registered new interface driver smsc95xx
- [ 4.499642] usbcore: registered new interface driver net1080
- [ 4.500211] usbcore: registered new interface driver plusb
- [ 4.500773] usbcore: registered new interface driver cdc_subset
- [ 4.501365] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
- [ 4.502124] usbcore: registered new interface driver cdc_ncm
- [ 4.503138] VFIO - User Level meta-driver version: 0.3
- [ 4.507840] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
- [ 4.519185] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 4.529235] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
- [ 4.539135] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.539861] ehci-pci: EHCI PCI platform driver
- [ 4.540443] ehci-platform: EHCI generic platform driver
- [ 4.543591] ehci-platform fe380000.usb: EHCI Host Controller
- [ 4.544180] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 4.547015] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 4.562363] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 4.564364] hub 1-0:1.0: USB hub found
- [ 4.564772] hub 1-0:1.0: 1 port detected
- [ 4.571735] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 4.572324] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 4.576973] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
- [ 4.594327] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 4.596348] hub 2-0:1.0: USB hub found
- [ 4.596728] hub 2-0:1.0: 1 port detected
- [ 4.598101] ehci-orion: EHCI orion driver
- [ 4.598915] ehci-exynos: EHCI EXYNOS driver
- [ 4.599566] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.600308] ohci-pci: OHCI PCI platform driver
- [ 4.601455] ohci-platform: OHCI generic platform driver
- [ 4.602819] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 4.603507] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 4.606828] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 4.671449] hub 3-0:1.0: USB hub found
- [ 4.671855] hub 3-0:1.0: 1 port detected
- [ 4.676622] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 4.677277] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 4.680276] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
- [ 4.743590] hub 4-0:1.0: USB hub found
- [ 4.743981] hub 4-0:1.0: 1 port detected
- [ 4.745540] ohci-exynos: OHCI EXYNOS driver
- [ 4.749748] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.750531] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 4.754322] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.755283] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
- [ 4.757488] hub 5-0:1.0: USB hub found
- [ 4.757936] hub 5-0:1.0: 1 port detected
- [ 4.758912] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.759431] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 4.760137] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.760816] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 4.762850] hub 6-0:1.0: USB hub found
- [ 4.763247] hub 6-0:1.0: 1 port detected
- [ 4.764492] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.765020] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 4.770501] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.771544] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
- [ 4.773800] hub 7-0:1.0: USB hub found
- [ 4.774631] hub 7-0:1.0: 1 port detected
- [ 4.775497] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.776022] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 4.776729] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.777413] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 4.779385] hub 8-0:1.0: USB hub found
- [ 4.779775] hub 8-0:1.0: 1 port detected
- [ 4.781842] usbcore: registered new interface driver usb-storage
- [ 4.792879] i2c /dev entries driver
- [ 4.808569] rk808 0-001b: chip id: 0x0
- [ 4.816443] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 4.817189] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 4.817837] DCDC_REG1: supplied by vcc_sys
- [ 4.819641] DCDC_REG2: supplied by vcc_sys
- [ 4.820678] DCDC_REG3: supplied by vcc_sys
- [ 4.821378] DCDC_REG4: supplied by vcc_sys
- [ 4.822502] LDO_REG1: supplied by vcc_sys
- [ 4.824185] LDO_REG2: supplied by vcc_sys
- [ 4.825738] LDO_REG3: supplied by vcc_sys
- [ 4.827774] LDO_REG4: supplied by vcc_sys
- [ 4.828344] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
- [ 4.830027] LDO_REG5: supplied by vcc_sys
- [ 4.831725] LDO_REG6: supplied by vcc_sys
- [ 4.833205] LDO_REG7: supplied by vcc_sys
- [ 4.834742] LDO_REG8: supplied by vcc_sys
- [ 4.836290] SWITCH_REG1: supplied by vcc3v3_sys
- [ 4.837104] SWITCH_REG2: supplied by vcc3v3_sys
- [ 4.842800] rk808-rtc rk808-rtc: registered as rtc0
- [ 4.844524] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 4.845225] fan53555-reg: supplied by vcc_sys
- [ 4.847238] vcc1v8_s3: supplied by vcc_1v8
- [ 4.848736] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
- [ 4.849393] fan53555-reg: supplied by vcc_sys
- [ 4.850780] random: fast init done
- [ 4.863672] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 4.869639] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 4.885481] Bluetooth: HCI UART driver ver 2.3
- [ 4.893023] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 Kz
- [ 4.895149] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changez
- [ 4.897065] sdhci: Secure Digital Host Controller Interface driver
- [ 4.897620] sdhci: Copyright(c) Pierre Ossman
- [ 4.898307] Synopsys Designware Multimedia Card Interface Driver
- [ 4.899894] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
- [ 4.900779] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 4.901384] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 4.901943] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
- [ 4.902979] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
- [ 4.903564] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
- [ 4.914439] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 4.928068] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.930589] mmc1: CQHCI version 5.10
- [ 4.954867] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 4.960272] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.963669] usbcore: registered new interface driver usbhid
- [ 4.964273] usbhid: USB HID core driver
- [ 4.973291] xt_time: kernel timezone is -0000
- [ 4.973713] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
- [ 4.974510] IPVS: Connection hash table configured (size=4096, memory=64Kbyt)
- [ 4.975394] IPVS: ipvs loaded.
- [ 4.975671] IPVS: [rr] scheduler registered.
- [ 4.976049] IPVS: [wrr] scheduler registered.
- [ 4.976435] IPVS: [lc] scheduler registered.
- [ 4.976813] IPVS: [wlc] scheduler registered.
- [ 4.977198] IPVS: [fo] scheduler registered.
- [ 4.977576] IPVS: [ovf] scheduler registered.
- [ 4.977967] IPVS: [lblc] scheduler registered.
- [ 4.978456] IPVS: [lblcr] scheduler registered.
- [ 4.978870] IPVS: [dh] scheduler registered.
- [ 4.979254] IPVS: [sh] scheduler registered.
- [ 4.979641] IPVS: [sed] scheduler registered.
- [ 4.980033] IPVS: [nq] scheduler registered.
- [ 4.980770] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- [ 4.981381] Initializing XFRM netlink socket
- [ 4.982201] NET: Registered protocol family 10
- [ 4.983829] Segment Routing with IPv6
- [ 4.984464] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 4.985371] NET: Registered protocol family 17
- [ 4.985802] bridge: filtering via arp/ip/ip6tables is no longer available by.
- [ 4.987172] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.987703] Bluetooth: HIDP socket layer initialized
- [ 4.988183] 8021q: 802.1Q VLAN Support v1.8
- [ 4.988584] 9pnet: Installing 9P2000 support
- [ 4.989023] Key type dns_resolver registered
- [ 4.990164] registered taskstats version 1
- [ 4.991392] Btrfs loaded, crc32c=crc32c-arm64-ce
- [ 5.009361] rk808-rtc rk808-rtc: setting system clock to 2018-09-19 15:37:17)
- [ 5.010130] of_cfs_init
- [ 5.010391] of_cfs_init: OK
- [ 5.010855] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 5.011615] cfg80211: failed to load regulatory.db
- [ 5.012529] vcc3v3_pcie: disabling
- [ 5.012853] ALSA device list:
- [ 5.013118] No soundcards found.
- [ 5.013721] ttyS2 - failed to request DMA
- [ 5.014621] Freeing unused kernel memory: 1408K
- Loading, please wait...
- starting version 237
- [ 5.110302] usb 7-1: new high-speed USB device number 2 using xhci-hcd
- [ 5.258415] iommu: Adding device ff8f0000.vop to group 0
- [ 5.259067] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
- [ 5.261457] iommu: Adding device ff900000.vop to group 1
- [ 5.262096] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
- [ 5.271013] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000p
- [ 5.271752] rockchip-drm display-subsystem: Linked as a consumer to ff900000p
- [ 5.273076] rockchip-drm display-subsystem: Linked as a consumer to ff940000i
- [ 5.276336] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_comp)
- [ 5.279719] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_comp)
- [ 5.280717] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
- [ 5.286593] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi)
- [ 5.287434] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.288014] [drm] No driver support for vblank timestamp query.
- [ 5.321666] hub 7-1:1.0: USB hub found
- [ 5.322161] hub 7-1:1.0: 4 ports detected
- [ 5.357903] Console: switching to colour frame buffer device 240x67
- [ 5.386382] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 5.393811] rockchip-drm display-subsystem: fb0: frame buffer device
- [ 5.410603] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 0
- [ 5.433752] hub 8-1:1.0: USB hub found
- [ 5.434433] hub 8-1:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- [ 6.314355] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hd
- [ 6.369075] scsi host0: uas
- [ 6.370184] scsi 0:0:0:0: Direct-Access Corsair Voyager GTX 0 P6
- [ 6.372245] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119)
- [ 6.373175] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.373863] usbcore: registered new interface driver uas
- Begin: Waiting for root file system ... Begin: Running /scripts/local-block ....
- done.
- [ 37.894255] sd 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
- [ 37.895146] sd 0:0:0:0: tag#0 CDB: opcode=0x1a 1a 00 08 00 04 00
- [ 37.922242] scsi host0: uas_eh_device_reset_handler start
- [ 37.922875] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea6
- [ 37.923822] xhci-hcd xhci-hcd.1.auto: @00000000f7116cf0 00000000 00000000 1b1
- [ 38.002545] usb 8-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhcid
- Gave up waiting for root file system device. Common problems:
- - Boot args (cat /proc/cmdline)
- - Check rootdelay= (did the system wait long enough?)
- - Missing modules (cat /proc/modules; ls /dev)
- ALERT! LABEL=linux-root does not exist. Dropping to a shell!
- Rebooting automatically due to panic= boot argument
- [ 38.024947] scsi host0: uas_eh_device_reset_handler success
- [ 38.030650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 38.031956] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea2
- [ 38.033045] xhci-hcd xhci-hcd.1.auto: @00000000f7116000 00000000 00000000 1b0
- [ 38.038499] GPT:Primary header thinks Alt. header is not at the end of the d.
- [ 38.039385] GPT:60620799 != 250069679
- [ 38.039813] GPT:Alternate GPT header not at the end of the disk.
- [ 38.040504] GPT:60620799 != 250069679
- [ 38.040930] GPT: Use GNU Parted to correct GPT errors.
- [ 38.041561] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
- [ 38.044546] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 48.023646] kvm: exiting hardware virtualization
- [ 48.024656] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 48.106544] usb 8-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhcid
- [ 48.158280] reboot: Restarting system
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 19
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Corsair Rev: 0 Prod: Voyager GTX
- Type: Hard Disk
- Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
- ... is now current device
- Scanning usb 0:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 3933 bytes read in 202 ms (18.6 KiB/s)
- select kernel
- 1: kernel-4.18.8-77394-g8cce48cacf88
- 2: kernel-4.18.8-77394-g8cce48cacf88-memtest
- 3: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
- 4: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest
- 5: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee
- 6: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee-memtest
- 7: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524
- 8: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest
- Enter choice: 1: kernel-4.18.8-77394-g8cce48cacf88
- Retrieving file: /boot/initrd.img-4.18.8-77394-g8cce48cacf88
- WARN halted endpoint, queueing URB anyway.
- Unexpected XHCI event TRB, skipping... (f5f1cbb0 00000000 13000000 02008400)
- "Synchronous Abort" handler, esr 0x96000010
- ELR: f7f6632c
- LR: f7f6632c
- x0 : 0000000000000000 x1 : 00000000000003e8
- x2 : 0000000000000040 x3 : 000000000000003f
- x4 : 00000000f5f1cf90 x5 : 0000000000000030
- x6 : 00000000f7f8b680 x7 : 000000000000000f
- x8 : 00000000f5f044a0 x9 : 0000000000000008
- x10: 00000000f5f04155 x11: 0000000000000008
- x12: 00000000ffffffff x13: 000000000232361d
- x14: 0000000000000003 x15: 0000000000000008
- x16: 000000000e9e72a5 x17: 0000000022100180
- x18: 00000000f5f12e08 x19: 00000000f5f39440
- x20: 00000000f5f43740 x21: 0000000000000002
- x22: 00000000f5f1f730 x23: 0000000000000012
- x24: 00000000f7fb30c0 x25: 0000000000000001
- x26: 0000000000000000 x27: 00000000f5f1f730
- x28: 0000000000000000 x29: 00000000f5f04620
- Resetting CPU ...
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 19
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Corsair Rev: 0 Prod: Voyager GTX
- Type: Hard Disk
- Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
- ... is now current device
- Scanning usb 0:7...
- WARN halted endpoint, queueing URB anyway.
- Unexpected XHCI event TRB, skipping... (f5f1cbb0 00000000 13000000 02008401)
- "Synchronous Abort" handler, esr 0x96000010
- ELR: f7f6632c
- LR: f7f6632c
- x0 : 0000000000000000 x1 : 00000000000003e8
- x2 : 0000000000000040 x3 : 000000000000003f
- x4 : 00000000f5f1cf90 x5 : 0000000000000031
- x6 : 00000000f7f8b680 x7 : 000000000000000f
- x8 : 00000000f5f051c0 x9 : 0000000000000008
- x10: 00000000f5f04e75 x11: 0000000000000008
- x12: 00000000ffffffff x13: 0000000000000200
- x14: 0000000000000003 x15: 0000000000000008
- x16: 000000000e9e72a5 x17: 0000000022100180
- x18: 00000000f5f12e08 x19: 00000000f5f39440
- x20: 00000000f5f43740 x21: 0000000000000002
- x22: 00000000f5f1f730 x23: 0000000000000012
- x24: 00000000f7fb30c0 x25: 0000000000000001
- x26: 0000000000000000 x27: 00000000f5f1f730
- x28: 0000000000000000 x29: 00000000f5f05340
- Resetting CPU ...
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 19
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... WARN halted endpoint, queueing URB anyway.
- Unexpected XHCI event TRB, skipping... (f5f1cbb0 00000000 13000000 01008400)
- "Synchronous Abort" handler, esr 0x96000010
- ELR: f7f6632c
- LR: f7f6632c
- x0 : 0000000000000000 x1 : 00000000000003e8
- x2 : 0000000000000040 x3 : 000000000000003f
- x4 : 00000000f5f19910 x5 : 0000000000000030
- x6 : 00000000f7f8b680 x7 : 000000000000000f
- x8 : 00000000f5f05490 x9 : 0000000000000008
- x10: 00000000f5f05145 x11: 0000000000000008
- x12: 00000000ffffffff x13: 0000000000001a50
- x14: 00000000f5f064cc x15: 0000000000000008
- x16: 000000000e9e72a5 x17: 0000000022100180
- x18: 00000000f5f12e08 x19: 00000000f5f39440
- x20: 00000000f5f3fe80 x21: 0000000000000000
- x22: 00000000f5f1a500 x23: 0000000000000000
- x24: 00000000f5f05900 x25: 0000000080000283
- x26: 0000000000000001 x27: 0000000000000001
- x28: 00000000f5f05780 x29: 00000000f5f05610
- Resetting CPU ...
- DDR Version 1.13 20180801
- In
- soft reset
- SRX
- Channel 0: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,50MHz
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x4D
- MR14=0x4D
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x3
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 400MHz 0,1
- channel 0
- CS = 0
- MR0=0x98
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x82
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x98
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- CS = 1
- MR0=0x18
- MR4=0x2
- MR5=0xFF
- MR8=0x8
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 800MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x2020
- ch 1 ddrconfig = 0x101, ddrsize = 0x2020
- pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
- OUT
- U-Boot SPL board init
- U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
- booted from SPI flash
- Trying to boot from SPI
- NOTICE: BL31: v1.3(debug):65aa5ce
- NOTICE: BL31: Built : 10:47:37, Jun 19 2018
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1151): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
- Model: Pine64 RockPro64
- DRAM: 3.9 GiB
- DCDC_REG1@vdd_center: ; enabling
- DCDC_REG2@vdd_cpu_l: ; enabling
- DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
- DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
- LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
- LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
- LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
- LDO_REG4@vcc_sd: set 3300000 uV; enabling
- LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
- LDO_REG6@vcc_1v5: set 1500000 uV; enabling
- LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
- LDO_REG8@vcc_3v0: set 3000000 uV; enabling
- SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
- SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
- vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
- dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
- vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
- vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
- vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
- vdd-log@vdd_log: ; enabling (ret: -38)
- MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
- SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- *** Warning - bad CRC, using default environment
- In: serial@ff1a0000
- Out: serial@ff1a0000
- Err: serial@ff1a0000
- Model: Pine64 RockPro64
- normal boot
- Net: eth0: ethernet@fe300000
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 20
- Card did not respond to voltage select!
- mmc_init: -95, time 9
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB EHCI 1.00
- USB2: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- USB3: Register 2000140 NbrPorts 2
- Starting the controller
- USB XHCI 1.10
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Device 0: Vendor: Corsair Rev: 0 Prod: Voyager GTX
- Type: Hard Disk
- Capacity: 122104.3 MB = 119.2 GB (250069680 x 512)
- ... is now current device
- Scanning usb 0:7...
- Found /boot/extlinux/extlinux.conf
- Retrieving file: /boot/extlinux/extlinux.conf
- 3933 bytes read in 203 ms (18.6 KiB/s)
- select kernel
- 1: kernel-4.18.8-77394-g8cce48cacf88
- 2: kernel-4.18.8-77394-g8cce48cacf88-memtest
- 3: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727
- 4: kernel-4.18.0-rc8-1060-ayufan-g45828c4db727-memtest
- 5: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee
- 6: kernel-4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee-memtest
- 7: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524
- 8: kernel-4.4.132-1075-rockchip-ayufan-ga83beded8524-memtest
- Enter choice: 1: kernel-4.18.8-77394-g8cce48cacf88
- Retrieving file: /boot/initrd.img-4.18.8-77394-g8cce48cacf88
- 23870441 bytes read in 1382 ms (16.5 MiB/s)
- Retrieving file: /boot/vmlinuz-4.18.8-77394-g8cce48cacf88
- 29178368 bytes read in 1578 ms (17.6 MiB/s)
- append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 4
- Retrieving file: /boot/dtbs/4.18.8-77394-g8cce48cacf88/rockchip/rk3399-rockpro6b
- 54350 bytes read in 638 ms (83 KiB/s)
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f4840000, end f5f03be9 ... OK
- Loading Device Tree to 00000000f482f000, end 00000000f483f44d ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f1040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f1050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002563] Console: colour dummy device 80x25
- [ 0.002987] console [tty0] enabled
- [ 0.003318] bootconsole [uart8250] disabled
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 4.18.8-77394-g8cce48cacf88 (root@rockpro64v_2_1) (8
- [ 0.000000] Machine model: Pine64 RockPro64
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7fffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa6f00-0xf6fa86bf]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 wit0
- [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d298
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
- [ 0.000000] Memory: 3925968K/4061184K available (17788K kernel code, 1934K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f1080000 (flat,)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GIC: using LPI property table @0x00000000f1040000
- [ 0.000000] ITS: Allocated 1792 chunks for LPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] CPU0: using LPI pending table @0x00000000f1050000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
- [ 0.002563] Console: colour dummy device 80x25
- [ 0.002987] console [tty0] enabled
- [ 0.003318] bootconsole [uart8250] disabled
- [ 0.003790] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.003826] pid_max: default: 32768 minimum: 301
- [ 0.003947] Security Framework initialized
- [ 0.006026] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
- [ 0.007076] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.007167] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.007220] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.030629] ASID allocator initialised with 32768 entries
- [ 0.038624] Hierarchical SRCU implementation.
- [ 0.046747] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.047147] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
- [ 0.051358] EFI services will not be available.
- [ 0.059262] smp: Bringing up secondary CPUs ...
- [ 0.091476] Detected VIPT I-cache on CPU1
- [ 0.091513] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.091557] CPU1: using LPI pending table @0x00000000f0440000
- [ 0.091604] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.123556] Detected VIPT I-cache on CPU2
- [ 0.123584] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.123625] CPU2: using LPI pending table @0x00000000f0480000
- [ 0.123658] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.155654] Detected VIPT I-cache on CPU3
- [ 0.155681] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.155721] CPU3: using LPI pending table @0x00000000f0490000
- [ 0.155752] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.190325] CPU features: enabling workaround for EL2 vector hardening
- [ 0.190799] Detected PIPT I-cache on CPU4
- [ 0.192070] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.194597] CPU4: using LPI pending table @0x00000000f04d0000
- [ 0.195809] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.233949] Detected PIPT I-cache on CPU5
- [ 0.235154] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.237683] CPU5: using LPI pending table @0x00000000f0500000
- [ 0.238836] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.244023] smp: Brought up 1 node, 6 CPUs
- [ 0.244507] SMP: Total of 6 processors activated.
- [ 0.244543] CPU features: detected: GIC system register CPU interface
- [ 0.244570] CPU features: detected: 32-bit EL0 Support
- [ 0.334667] CPU: All CPU(s) started at EL2
- [ 0.335155] alternatives: patching kernel code
- [ 0.339330] devtmpfs: initialized
- [ 0.357455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 0.357696] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.359739] xor: measuring software checksum speed
- [ 0.396448] 8regs : 1148.000 MB/sec
- [ 0.436624] 8regs_prefetch: 1026.000 MB/sec
- [ 0.476886] 32regs : 1415.000 MB/sec
- [ 0.517104] 32regs_prefetch: 1190.000 MB/sec
- [ 0.517124] xor: using function: 32regs (1415.000 MB/sec)
- [ 0.517174] pinctrl core: initialized pinctrl subsystem
- [ 0.520297] DMI not present or invalid.
- [ 0.522336] NET: Registered protocol family 16
- [ 0.526728] audit: initializing netlink subsys (disabled)
- [ 0.527390] audit: type=2000 audit(0.520:1): state=initialized audit_enabled1
- [ 0.535329] cpuidle: using governor menu
- [ 0.536661] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval__)
- [ 0.536862] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.547621] DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.551112] Serial: AMBA PL011 UART driver
- [ 0.671051] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.678292] cryptd: max_cpu_qlen set to 1000
- [ 0.751095] raid6: int64x1 gen() 215 MB/s
- [ 0.819058] raid6: int64x1 xor() 220 MB/s
- [ 0.887611] raid6: int64x2 gen() 337 MB/s
- [ 0.955816] raid6: int64x2 xor() 302 MB/s
- [ 1.024279] raid6: int64x4 gen() 519 MB/s
- [ 1.092567] raid6: int64x4 xor() 382 MB/s
- [ 1.160963] raid6: int64x8 gen() 492 MB/s
- [ 1.229325] raid6: int64x8 xor() 376 MB/s
- [ 1.297727] raid6: neonx1 gen() 363 MB/s
- [ 1.366088] raid6: neonx1 xor() 426 MB/s
- [ 1.434543] raid6: neonx2 gen() 581 MB/s
- [ 1.502835] raid6: neonx2 xor() 604 MB/s
- [ 1.571260] raid6: neonx4 gen() 754 MB/s
- [ 1.639625] raid6: neonx4 xor() 723 MB/s
- [ 1.708005] raid6: neonx8 gen() 826 MB/s
- [ 1.776438] raid6: neonx8 xor() 769 MB/s
- [ 1.776457] raid6: using algorithm neonx8 gen() 826 MB/s
- [ 1.776476] raid6: .... xor() 769 MB/s, rmw enabled
- [ 1.776494] raid6: using neon recovery algorithm
- [ 1.777968] ACPI: Interpreter disabled.
- [ 1.780825] vcc3v3_pcie: supplied by dc_12v
- [ 1.782808] vcc_sys: supplied by dc_12v
- [ 1.786309] vgaarb: loaded
- [ 1.787137] SCSI subsystem initialized
- [ 1.788682] usbcore: registered new interface driver usbfs
- [ 1.788845] usbcore: registered new interface driver hub
- [ 1.789103] usbcore: registered new device driver usb
- [ 1.792111] media: Linux media interface: v0.10
- [ 1.792382] videodev: Linux video capture interface: v2.00
- [ 1.793115] pps_core: LinuxPPS API ver. 1 registered
- [ 1.793145] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.793255] PTP clock support registered
- [ 1.795944] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.797139] Bluetooth: Core ver 2.22
- [ 1.797276] NET: Registered protocol family 31
- [ 1.797298] Bluetooth: HCI device and connection manager initialized
- [ 1.797332] Bluetooth: HCI socket layer initialized
- [ 1.797356] Bluetooth: L2CAP socket layer initialized
- [ 1.797418] Bluetooth: SCO socket layer initialized
- [ 1.797471] NetLabel: Initializing
- [ 1.797492] NetLabel: domain hash size = 128
- [ 1.797508] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 1.797623] NetLabel: unlabeled traffic allowed by default
- [ 1.801337] clocksource: Switched to clocksource arch_sys_counter
- [ 1.802014] VFS: Disk quotas dquot_6.6.0
- [ 1.802114] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.802442] pnp: PnP ACPI: disabled
- [ 1.821937] NET: Registered protocol family 2
- [ 1.823796] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
- [ 1.824045] TCP established hash table entries: 32768 (order: 6, 262144 byte)
- [ 1.824679] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.825983] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.826739] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.826930] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.827461] NET: Registered protocol family 1
- [ 1.831972] RPC: Registered named UNIX socket transport module.
- [ 1.831997] RPC: Registered udp transport module.
- [ 1.832015] RPC: Registered tcp transport module.
- [ 1.832033] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.834926] Trying to unpack rootfs image as initramfs...
- [ 3.800840] Freeing initrd memory: 23308K
- [ 3.810368] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
- [ 3.814026] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
- [ 3.814916] kvm [1]: 8-bit VMID
- [ 3.817457] kvm [1]: vgic-v2@fff20000
- [ 3.819112] kvm [1]: GIC system register CPU interface enabled
- [ 3.822332] kvm [1]: vgic interrupt IRQ10
- [ 3.824795] kvm [1]: Hyp mode initialized successfully
- [ 3.857305] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 3.875143] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.877556] NFS: Registering the id_resolver key type
- [ 3.877752] Key type id_resolver registered
- [ 3.877776] Key type id_legacy registered
- [ 3.877810] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.877832] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 3.879836] fuse init (API version 7.27)
- [ 3.881660] 9p: Installing v9fs 9p2000 file system support
- [ 3.882932] pstore: using deflate compression
- [ 3.907107] NET: Registered protocol family 38
- [ 3.907362] Key type asymmetric registered
- [ 3.907387] Asymmetric key parser 'x509' registered
- [ 3.908192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 3.908726] io scheduler noop registered
- [ 3.908748] io scheduler deadline registered
- [ 3.909504] io scheduler cfq registered (default)
- [ 3.909532] io scheduler mq-deadline registered
- [ 3.909551] io scheduler kyber registered
- [ 3.919922] vcc5v0_host: supplied by vcc_sys
- [ 3.978480] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.978635] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
- [ 3.983937] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
- [ 3.984113] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
- [ 3.997816] pwm-regulator: supplied by vcc_sys
- [ 3.998589] vcc3v3_sys: supplied by vcc_sys
- [ 4.009478] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 4.013869] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud =A
- [ 4.016026] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud =A
- [ 4.125662] console [ttyS2] enabled
- [ 4.128852] SuperH (H)SCI(F) driver initialized
- [ 4.130418] msm_serial: driver initialized
- [ 4.154015] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 4.180502] brd: module loaded
- [ 4.198189] loop: module loaded
- [ 4.245815] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
- [ 4.246523] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
- [ 4.251310] m25p80 spi0.0: gd25q128 (16384 Kbytes)
- [ 4.460528] 3 fixed-partitions partitions found on MTD device spi0.0
- [ 4.461185] Creating 3 MTD partitions on "spi0.0":
- [ 4.461632] 0x000000000000-0x0000003f8000 : "loader"
- [ 4.465169] 0x0000003f8000-0x000000400000 : "env"
- [ 4.467165] 0x0000007c0000-0x000000800000 : "vendor"
- [ 4.471159] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 4.480670] libphy: Fixed MDIO Bus: probed
- [ 4.483024] tun: Universal TUN/TAP device driver, 1.6
- [ 4.488067] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.488663] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.489800] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 4.490465] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.491069] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
- [ 4.491775] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 4.493732] sky2: driver version 1.30
- [ 4.497852] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 4.498726] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 4.499370] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 4.499887] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 4.500407] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 4.501079] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 4.506647] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 4.508612] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 4.509339] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 4.509819] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
- [ 4.510496] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
- [ 4.511174] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 4.511650] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 4.512286] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 4.512930] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 4.513513] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 4.514045] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
- [ 4.632184] libphy: stmmac: probed
- [ 4.632579] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
- [ 4.633750] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
- [ 4.638079] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr
- [ 4.638897] usbcore: registered new interface driver pegasus
- [ 4.639490] usbcore: registered new interface driver rtl8150
- [ 4.640079] usbcore: registered new interface driver r8152
- [ 4.640655] usbcore: registered new interface driver asix
- [ 4.641342] usbcore: registered new interface driver ax88179_178a
- [ 4.641949] usbcore: registered new interface driver cdc_ether
- [ 4.642532] usbcore: registered new interface driver dm9601
- [ 4.643123] usbcore: registered new interface driver CoreChips
- [ 4.643729] usbcore: registered new interface driver smsc75xx
- [ 4.644314] usbcore: registered new interface driver smsc95xx
- [ 4.644890] usbcore: registered new interface driver net1080
- [ 4.645507] usbcore: registered new interface driver plusb
- [ 4.646080] usbcore: registered new interface driver cdc_subset
- [ 4.646677] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
- [ 4.647429] usbcore: registered new interface driver cdc_ncm
- [ 4.648604] VFIO - User Level meta-driver version: 0.3
- [ 4.652518] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
- [ 4.664276] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
- [ 4.671076] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
- [ 4.680928] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.681743] ehci-pci: EHCI PCI platform driver
- [ 4.682263] ehci-platform: EHCI generic platform driver
- [ 4.685287] ehci-platform fe380000.usb: EHCI Host Controller
- [ 4.685860] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
- [ 4.688766] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
- [ 4.705062] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 4.707313] hub 1-0:1.0: USB hub found
- [ 4.707748] hub 1-0:1.0: 1 port detected
- [ 4.711398] ehci-platform fe3c0000.usb: EHCI Host Controller
- [ 4.711949] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
- [ 4.716216] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
- [ 4.733032] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
- [ 4.735038] hub 2-0:1.0: USB hub found
- [ 4.735435] hub 2-0:1.0: 1 port detected
- [ 4.736738] ehci-orion: EHCI orion driver
- [ 4.737768] ehci-exynos: EHCI EXYNOS driver
- [ 4.738441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.739113] ohci-pci: OHCI PCI platform driver
- [ 4.739652] ohci-platform: OHCI generic platform driver
- [ 4.740487] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 4.741257] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
- [ 4.743672] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
- [ 4.806662] hub 3-0:1.0: USB hub found
- [ 4.807063] hub 3-0:1.0: 1 port detected
- [ 4.808382] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
- [ 4.809186] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
- [ 4.810769] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
- [ 4.874321] hub 4-0:1.0: USB hub found
- [ 4.874709] hub 4-0:1.0: 1 port detected
- [ 4.876024] ohci-exynos: OHCI EXYNOS driver
- [ 4.878329] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.878875] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
- [ 4.882113] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.883048] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
- [ 4.885571] hub 5-0:1.0: USB hub found
- [ 4.885961] hub 5-0:1.0: 1 port detected
- [ 4.886904] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.887440] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
- [ 4.888147] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.888825] usb usb6: We don't know the algorithms for LPM for this host, di.
- [ 4.890752] hub 6-0:1.0: USB hub found
- [ 4.891144] hub 6-0:1.0: 1 port detected
- [ 4.892413] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.892934] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
- [ 4.896081] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
- [ 4.897220] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
- [ 4.899559] hub 7-0:1.0: USB hub found
- [ 4.899971] hub 7-0:1.0: 1 port detected
- [ 4.901187] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.901719] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
- [ 4.902426] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.903114] usb usb8: We don't know the algorithms for LPM for this host, di.
- [ 4.904997] hub 8-0:1.0: USB hub found
- [ 4.905401] hub 8-0:1.0: 1 port detected
- [ 4.907195] usbcore: registered new interface driver usb-storage
- [ 4.918080] i2c /dev entries driver
- [ 4.927281] rk808 0-001b: chip id: 0x0
- [ 4.933690] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 4.934330] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 4.935023] DCDC_REG1: supplied by vcc_sys
- [ 4.936434] DCDC_REG2: supplied by vcc_sys
- [ 4.937517] DCDC_REG3: supplied by vcc_sys
- [ 4.938229] DCDC_REG4: supplied by vcc_sys
- [ 4.939223] LDO_REG1: supplied by vcc_sys
- [ 4.940934] LDO_REG2: supplied by vcc_sys
- [ 4.942494] LDO_REG3: supplied by vcc_sys
- [ 4.943985] LDO_REG4: supplied by vcc_sys
- [ 4.944537] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
- [ 4.946348] LDO_REG5: supplied by vcc_sys
- [ 4.947740] LDO_REG6: supplied by vcc_sys
- [ 4.949326] LDO_REG7: supplied by vcc_sys
- [ 4.950720] LDO_REG8: supplied by vcc_sys
- [ 4.952265] SWITCH_REG1: supplied by vcc3v3_sys
- [ 4.953157] SWITCH_REG2: supplied by vcc3v3_sys
- [ 4.958030] rk808-rtc rk808-rtc: registered as rtc0
- [ 4.959719] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
- [ 4.960375] fan53555-reg: supplied by vcc_sys
- [ 4.962086] vcc1v8_s3: supplied by vcc_1v8
- [ 4.963516] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
- [ 4.964196] fan53555-reg: supplied by vcc_sys
- [ 4.973445] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 4.979112] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 4.994136] Bluetooth: HCI UART driver ver 2.3
- [ 4.999618] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 Kz
- [ 5.000870] random: fast init done
- [ 5.001347] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changez
- [ 5.003368] sdhci: Secure Digital Host Controller Interface driver
- [ 5.003924] sdhci: Copyright(c) Pierre Ossman
- [ 5.004563] Synopsys Designware Multimedia Card Interface Driver
- [ 5.006198] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
- [ 5.007027] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
- [ 5.007633] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
- [ 5.008179] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bio
- [ 5.009187] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
- [ 5.009782] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
- [ 5.021197] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
- [ 5.034832] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 5.037336] mmc1: CQHCI version 5.10
- [ 5.063409] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
- [ 5.068440] ledtrig-cpu: registered to indicate activity on CPUs
- [ 5.071755] usbcore: registered new interface driver usbhid
- [ 5.072336] usbhid: USB HID core driver
- [ 5.081963] xt_time: kernel timezone is -0000
- [ 5.082387] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
- [ 5.083175] IPVS: Connection hash table configured (size=4096, memory=64Kbyt)
- [ 5.084047] IPVS: ipvs loaded.
- [ 5.084323] IPVS: [rr] scheduler registered.
- [ 5.084701] IPVS: [wrr] scheduler registered.
- [ 5.085108] IPVS: [lc] scheduler registered.
- [ 5.085486] IPVS: [wlc] scheduler registered.
- [ 5.085872] IPVS: [fo] scheduler registered.
- [ 5.086249] IPVS: [ovf] scheduler registered.
- [ 5.086640] IPVS: [lblc] scheduler registered.
- [ 5.087038] IPVS: [lblcr] scheduler registered.
- [ 5.087439] IPVS: [dh] scheduler registered.
- [ 5.087816] IPVS: [sh] scheduler registered.
- [ 5.088194] IPVS: [sed] scheduler registered.
- [ 5.088580] IPVS: [nq] scheduler registered.
- [ 5.089277] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
- [ 5.089891] Initializing XFRM netlink socket
- [ 5.090671] NET: Registered protocol family 10
- [ 5.091824] Segment Routing with IPv6
- [ 5.092429] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 5.093352] NET: Registered protocol family 17
- [ 5.093782] bridge: filtering via arp/ip/ip6tables is no longer available by.
- [ 5.095037] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.095563] Bluetooth: HIDP socket layer initialized
- [ 5.096037] 8021q: 802.1Q VLAN Support v1.8
- [ 5.096436] 9pnet: Installing 9P2000 support
- [ 5.096865] Key type dns_resolver registered
- [ 5.098062] registered taskstats version 1
- [ 5.099156] Btrfs loaded, crc32c=crc32c-arm64-ce
- [ 5.116453] rk808-rtc rk808-rtc: setting system clock to 2018-09-19 15:39:43)
- [ 5.117253] of_cfs_init
- [ 5.117503] of_cfs_init: OK
- [ 5.117972] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 5.118733] cfg80211: failed to load regulatory.db
- [ 5.119665] vcc3v3_pcie: disabling
- [ 5.119990] ALSA device list:
- [ 5.120254] No soundcards found.
- [ 5.120848] ttyS2 - failed to request DMA
- [ 5.121782] Freeing unused kernel memory: 1408K
- Loading, please wait...
- starting version 237
- [ 5.237026] usb 7-1: new high-speed USB device number 2 using xhci-hcd
- [ 5.379208] iommu: Adding device ff8f0000.vop to group 0
- [ 5.379845] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
- [ 5.382155] iommu: Adding device ff900000.vop to group 1
- [ 5.382794] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
- [ 5.386573] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000p
- [ 5.387248] rockchip-drm display-subsystem: Linked as a consumer to ff900000p
- [ 5.388248] rockchip-drm display-subsystem: Linked as a consumer to ff940000i
- [ 5.391632] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_comp)
- [ 5.394080] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_comp)
- [ 5.394999] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
- [ 5.399572] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi)
- [ 5.400414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 5.401044] [drm] No driver support for vblank timestamp query.
- [ 5.447339] hub 7-1:1.0: USB hub found
- [ 5.447563] hub 7-1:1.0: 4 ports detected
- [ 5.470612] Console: switching to colour frame buffer device 240x67
- [ 5.504329] rockchip-drm display-subsystem: fb0: frame buffer device
- [ 5.513235] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 5.525628] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem 0
- [ 5.559560] hub 8-1:1.0: USB hub found
- [ 5.560323] hub 8-1:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- [ 6.449094] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hd
- [ 6.491399] scsi host0: uas
- [ 6.492267] scsi 0:0:0:0: Direct-Access Corsair Voyager GTX 0 P6
- [ 6.494595] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119)
- [ 6.495078] usbcore: registered new interface driver uas
- Begin: Waiting for root file system ... Begin: Running /scripts/local-block ....
- done.
- [ 37.893008] sd 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
- [ 37.893863] sd 0:0:0:0: tag#0 CDB: opcode=0x1a 1a 00 3f 00 04 00
- [ 37.916995] scsi host0: uas_eh_device_reset_handler start
- [ 37.917697] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea6
- [ 37.918701] xhci-hcd xhci-hcd.1.auto: @00000000f7116cc0 00000000 00000000 1b1
- [ 37.997284] usb 8-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhcid
- [ 38.019054] scsi host0: uas_eh_device_reset_handler success
- [ 38.025085] sd 0:0:0:0: [sda] Write Protect is off
- [ 38.025823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doeA
- [ 38.026901] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea2
- [ 38.027819] xhci-hcd xhci-hcd.1.auto: @00000000f7116000 00000000 00000000 1b0
- [ 38.032868] GPT:Primary header thinks Alt. header is not at the end of the d.
- [ 38.033721] GPT:60620799 != 250069679
- [ 38.034125] GPT:Alternate GPT header not at the end of the disk.
- [ 38.034772] GPT:60620799 != 250069679
- [ 38.035173] GPT: Use GNU Parted to correct GPT errors.
- [ 38.035757] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
- [ 38.038289] sd 0:0:0:0: [sda] Attached SCSI disk
- Warning: fsck not present, so skipping root file system
- [ 38.177137] EXT4-fs (sda7): mounted filesystem with writeback data mode. Opt)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 38.376700] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SE)
- [ 38.379643] systemd[1]: Detected architecture arm64.
- Welcome to Ubuntu 18.04.1 LTS!
- [ 38.397609] systemd[1]: Set hostname to <rockpro64v_2_1>.
- [ 38.494851] systemd[1]: File /lib/systemd/system/systemd-journald.service:36.
- [ 38.496708] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warn)
- [ 38.621772] random: systemd: uninitialized urandom read (16 bytes read)
- [ 38.622870] systemd[1]: Started Forward Password Requests to Wall Directory .
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ 38.633079] random: systemd: uninitialized urandom read (16 bytes read)
- [ 38.633950] systemd[1]: Started Dispatch Password Requests to Console Direct.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ 38.645073] random: systemd: uninitialized urandom read (16 bytes read)
- [ 38.657967] systemd[1]: Reached target Local Encrypted Volumes.
- [ OK ] Reached target Local Encrypted Volumes.
- [ 38.677382] systemd[1]: Started ntp-systemd-netif.path.
- [ OK ] Started ntp-systemd-netif.path.
- [ 38.701220] systemd[1]: Reached target System Time Synchronized.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Created slice System Slice.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Reached target Slices.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Journal Socket.
- Starting Remount Root and Kernel File Systems...
- Starting Restore / save the current clock...
- Mounting NFSD configuration filesystem...
- Mounting RPC Pipe File System...
- Starting Load Kernel Modules...
- Starting Set the console keyboard layout...
- Starting Nameserver information manager...
- Starting Journal Service...
- Mounting POSIX Message Queue File System...
- [ OK ] Listening on RPCbind Server Activation Socket.
- Mounting Kernel Debug File System...
- [ OK ] Listening on udev Control Socket.
- Starting Create list of required st��…ce nodes for the current kernel..
- Starting udev Coldplug all Devices...
- Mounting Huge Pages File System...
- [ OK ] Started Journal Service.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Mounted NFSD configuration filesystem.
- [ OK ] Mounted RPC Pipe File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create list of required sta��…vice nodes for the current kerne.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Nameserver information manager.
- [ OK ] Reached target Network (Pre).
- Starting Create Static Device Nodes in /dev...
- Mounting FUSE Control File System...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- Starting pNFS block layout mapping daemon...
- [ 39.337534] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea2
- [ 39.347609] xhci-hcd xhci-hcd.1.auto: @00000000f7116520 00000000 00000000 1b1
- Starting Load/Save Random Seed...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started pNFS block layout mapping daemon.
- [ OK ] Started Load/Save Random Seed.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Started udev Kernel Device Manager.
- Starting Network Service...
- [ 39.610601] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown strea3
- [ 39.618109] xhci-hcd xhci-hcd.1.auto: @00000000f7116b80 00000000 00000000 1b1
- [ OK ] Started Network Service.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ 39.720129] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff8800
- [ OK ] Found device /dev/ttyS2.
- [ 39.737424] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
- [ 39.746141] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) frl
- [ 39.754103] es8316 1-0010: Error applying setting, reverse things back
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Found device Corsair_Voyager_GTX boot.
- Mounting /boot/efi...
- [ OK ] Mounted /boot/efi.
- [ OK ] Reached target Local File Systems.
- Starting Raise network interfaces...
- Starting Set console font and keymap...
- Starting Create Volatile Files and Directories...
- Starting Preprocess NFS configuration...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Preprocess NFS configuration.
- Starting NFSv4 ID-name mapping service...
- [ OK ] Reached target NFS client services.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Name Resolution...
- Starting Network Time Synchronization...
- Starting RPC bind portmap service...
- [ OK ] Started NFSv4 ID-name mapping service.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started RPC bind portmap service.
- [ OK ] Reached target RPC Port Mapper.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ 40.265358] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Message of the Day.
- [ OK ] Started resolvconf-pull-resolved.path.
- [ OK ] Reached target Paths.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Basic System.
- Starting Rock 64 First boot...
- [ OK ] Started Set the CPU Frequency Scaling governor.
- Starting resolvconf-pull-resolved.service...
- Starting Initializes zram swaping...
- [ OK ] Started D-Bus System Message Bus.
- Starting WPA supplicant...
- [ OK ] Started ntp-systemd-netif.service.
- Starting Resets System Activity Data Collector...
- Starting Network Manager...
- Starting Dispatcher daemon for systemd-networkd...
- Starting System Logging Service...
- Starting Generate SSH keys if not there...
- Starting Login Service...
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Reached target Timers.
- [ OK ] Started Network Name Resolution.
- [ OK ] Started System Logging Service.
- [ OK ] Started Rock 64 First boot.
- [ OK ] Started resolvconf-pull-resolved.service.
- [FAILED] Failed to start Initializes zram swaping.
- See 'systemctl status zram-config.service' for details.
- [ OK ] Started Resets System Activity Data Collector.
- [ OK ] Started Generate SSH keys if not there.
- [ OK ] Started WPA supplicant.
- [ OK ] Started Login Service.
- Starting Hostname Service...
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Started Hostname Service.
- [ OK ] Started Network Manager.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Reached target Network.
- Starting NFS Mount Daemon...
- Starting OpenBSD Secure Shell server...
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started NFS Mount Daemon.
- Starting Authorization Manager...
- Starting NFS server and services...
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Authorization Manager.
- [ OK ] Started NFS server and services.
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems.
- Starting Permit User Sessions...
- [ OK ] Started Permit User Sessions.
- Starting Set console scheme...
- [ OK ] Started Serial Getty on ttyS2.
- [ OK ] Started Set console scheme.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Dispatcher daemon for systemd-networkd.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 18.04.1 LTS rockpro64v_2_1 ttyS2
- rockpro64v_2_1 login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement