Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ########## wireless info START ##########
- Report from: 16 Apr 2017 02:03 IST +0100
- Booted last: 16 Apr 2017 00:34 IST +0100
- Script from: 25 Mar 2017 07:04 UTC +0000
- ##### release ###########################
- Distributor ID: Ubuntu
- Description: Ubuntu 14.04.5 LTS
- Release: 14.04
- Codename: trusty
- ##### kernel ############################
- Linux 4.4.0-31-generic #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
- Parameters: ro, quiet, splash, vt.handoff=7
- ##### desktop ###########################
- Ubuntu
- ##### lspci #############################
- 00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
- Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter [8086:001e]
- Kernel driver in use: e1000
- ##### lsusb #############################
- Bus 001 Device 004: ID 2357:010c
- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Bus 002 Device 002: ID 80ee:0021 VirtualBox USB Tablet
- Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- ##### PCMCIA card info ##################
- ##### rfkill ############################
- ##### lsmod #############################
- 8188eu 737280 0
- cfg80211 557056 0
- ##### interfaces ########################
- auto lo
- iface lo inet loopback
- ##### ifconfig ##########################
- eth0 Link encap:Ethernet HWaddr <MAC 'eth0' [IF1]>
- inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
- inet6 addr: fe80::<IP6 'eth0' [IF1]>/64 Scope:Link
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:20977 errors:0 dropped:0 overruns:0 frame:0
- TX packets:9031 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:19257631 (19.2 MB) TX bytes:1142436 (1.1 MB)
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- inet6 addr: ::1/128 Scope:Host
- UP LOOPBACK RUNNING MTU:65536 Metric:1
- RX packets:1240 errors:0 dropped:0 overruns:0 frame:0
- TX packets:1240 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1
- RX bytes:131058 (131.0 KB) TX bytes:131058 (131.0 KB)
- ##### iwconfig ##########################
- lo no wireless extensions.
- eth0 no wireless extensions.
- ##### route #############################
- Kernel IP routing table
- Destination Gateway Genmask Flags Metric Ref Use Iface
- 0.0.0.0 10.0.2.2 0.0.0.0 UG 0 0 0 eth0
- 10.0.2.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0
- ##### resolv.conf #######################
- nameserver 127.0.1.1
- search chello.ie
- ##### network managers ##################
- Installed:
- NetworkManager
- Running:
- root 797 1 0 00:34 ? 00:00:00 NetworkManager
- ##### NetworkManager info ###############
- NetworkManager Tool
- State: connected (global)
- - Device: eth0 [Wired connection 1] -------------------------------------------
- Type: Wired
- Driver: e1000
- State: connected
- Default: yes
- HW Address: <MAC 'eth0' [IF1]>
- Capabilities:
- Carrier Detect: yes
- Speed: 1000 Mb/s
- Wired Properties
- Carrier: on
- IPv4 Settings:
- Address: 10.0.2.15
- Prefix: 24 (255.255.255.0)
- Gateway: 10.0.2.2
- DNS: 89.101.160.5
- DNS: 89.101.160.4
- ##### NetworkManager.state ##############
- [main]
- NetworkingEnabled=true
- WirelessEnabled=true
- WWANEnabled=true
- WimaxEnabled=true
- ##### NetworkManager.conf ###############
- [main]
- plugins=ifupdown,keyfile,ofono
- dns=dnsmasq
- [ifupdown]
- managed=false
- ##### NetworkManager profiles ###########
- ##### iw reg get ########################
- Region: Europe/Dublin (based on set time zone)
- country 00:
- (2402 - 2472 @ 40), (3, 20)
- (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
- (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
- ##### iwlist channels ###################
- lo no frequency information.
- eth0 no frequency information.
- ##### iwlist scan #######################
- lo Interface doesn't support scanning.
- eth0 Interface doesn't support scanning.
- ##### module infos ######################
- [8188eu]
- filename: /lib/modules/4.4.0-31-generic/kernel/drivers/net/wireless/8188eu.ko
- version: v4.1.4_6773.20130222
- author: Realtek Semiconductor Corp.
- description: Realtek Wireless Lan Driver
- license: GPL
- srcversion: 5FE26617F6898A5ED383627
- depends:
- vermagic: 4.4.0-31-generic SMP mod_unload modversions
- parm: rtw_ips_mode:The default IPS mode (int)
- parm: ifname:The default name to allocate for first interface (charp)
- parm: if2name:The default name to allocate for second interface (charp)
- parm: rtw_initmac:charp
- parm: rtw_channel_plan:int
- parm: rtw_chip_version:int
- parm: rtw_rfintfs:int
- parm: rtw_lbkmode:int
- parm: rtw_network_mode:int
- parm: rtw_channel:int
- parm: rtw_mp_mode:int
- parm: rtw_wmm_enable:int
- parm: rtw_vrtl_carrier_sense:int
- parm: rtw_vcs_type:int
- parm: rtw_busy_thresh:int
- parm: rtw_ht_enable:int
- parm: rtw_cbw40_enable:int
- parm: rtw_ampdu_enable:int
- parm: rtw_rx_stbc:int
- parm: rtw_ampdu_amsdu:int
- parm: rtw_lowrate_two_xmit:int
- parm: rtw_rf_config:int
- parm: rtw_power_mgnt:int
- parm: rtw_smart_ps:int
- parm: rtw_low_power:int
- parm: rtw_wifi_spec:int
- parm: rtw_antdiv_cfg:int
- parm: rtw_antdiv_type:int
- parm: rtw_enusbss:int
- parm: rtw_hwpdn_mode:int
- parm: rtw_hwpwrp_detect:int
- parm: rtw_hw_wps_pbc:int
- parm: rtw_max_roaming_times:The max roaming times to try (uint)
- parm: rtw_fw_iol:FW IOL (int)
- parm: rtw_mc2u_disable:int
- parm: rtw_80211d:Enable 802.11d mechanism (int)
- parm: rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
- parm: debug:Set debug level (1-9) (default 1) (int)
- [cfg80211]
- filename: /lib/modules/4.4.0-31-generic/kernel/net/wireless/cfg80211.ko
- description: wireless configuration support
- license: GPL
- author: Johannes Berg
- srcversion: 25A45701AAA64DAC1E47D9D
- depends:
- intree: Y
- vermagic: 4.4.0-31-generic SMP mod_unload modversions
- parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
- parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
- ##### module parameters #################
- [8188eu]
- debug: 1
- if2name: wlan%d
- ifname: wlan%d
- rtw_80211d: 0
- rtw_ampdu_amsdu: 0
- rtw_ampdu_enable: 1
- rtw_antdiv_cfg: 2
- rtw_antdiv_type: 0
- rtw_busy_thresh: 40
- rtw_cbw40_enable: 3
- rtw_channel: 1
- rtw_channel_plan: 66
- rtw_chip_version: 0
- rtw_enusbss: 0
- rtw_fw_iol: 1
- rtw_ht_enable: 1
- rtw_hwpdn_mode: 2
- rtw_hwpwrp_detect: 0
- rtw_hw_wps_pbc: 1
- rtw_initmac: (null)
- rtw_ips_mode: 1
- rtw_lbkmode: 0
- rtw_low_power: 0
- rtw_lowrate_two_xmit: 1
- rtw_max_roaming_times: 2
- rtw_mc2u_disable: 0
- rtw_mp_mode: 0
- rtw_network_mode: 0
- rtw_notch_filter: 0
- rtw_power_mgnt: 1
- rtw_rf_config: 5
- rtw_rfintfs: 2
- rtw_rx_stbc: 1
- rtw_smart_ps: 2
- rtw_vcs_type: 1
- rtw_vrtl_carrier_sense: 2
- rtw_wifi_spec: 0
- rtw_wmm_enable: 1
- [cfg80211]
- cfg80211_disable_40mhz_24ghz: N
- ieee80211_regdom: 00
- ##### /etc/modules ######################
- lp
- rtc
- ##### modprobe options ##################
- [/etc/modprobe.d/50-8188eu.conf]
- blacklist r8188eu
- [/etc/modprobe.d/blacklist-ath_pci.conf]
- blacklist ath_pci
- [/etc/modprobe.d/blacklist.conf]
- blacklist evbug
- blacklist usbmouse
- blacklist usbkbd
- blacklist eepro100
- blacklist de4x5
- blacklist eth1394
- blacklist snd_intel8x0m
- blacklist snd_aw2
- blacklist i2c_i801
- blacklist prism54
- blacklist bcm43xx
- blacklist garmin_gps
- blacklist asus_acpi
- blacklist snd_pcsp
- blacklist pcspkr
- blacklist amd76x_edac
- [/etc/modprobe.d/blacklist-rare-network.conf]
- alias net-pf-3 off
- alias net-pf-6 off
- alias net-pf-9 off
- alias net-pf-11 off
- alias net-pf-12 off
- alias net-pf-19 off
- alias net-pf-21 off
- alias net-pf-36 off
- [/etc/modprobe.d/iwlwifi.conf]
- remove iwlwifi \
- (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
- && /sbin/modprobe -r mac80211
- [/etc/modprobe.d/mlx4.conf]
- softdep mlx4_core post: mlx4_en
- ##### rc.local ##########################
- exit 0
- ##### pm-utils ##########################
- ##### udev rules ########################
- ##### dmesg #############################
- [ 7.499603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 7.500455] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
- [ 7.500696] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 3291.267212] 8188eu: module verification failed: signature and/or required key missing - tainting kernel
- [ 3356.839170] init: networking post-stop process (2913) terminated with status 100
- [ 3384.896941] init: networking post-stop process (2937) terminated with status 100
- ########## wireless info END ############
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement