1245

Linux version 2.6.19 (root@hp.tecom.intra) (gcc version 3.2.3-1.2.8) #475 Mon Apr 19 15:35:31 CST 2010
CPU revision is: 0000ff00
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 4064
Kernel command line: console=ttyS0,115200 mem=16M root=31:1
root_dev_setup 222 line:31:1
Primary instruction cache 16kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 11876k/16384k available (3360k kernel code, 4508k reserved, 652k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  disabled.
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: -1, 2048 bytes)
TCP bind hash table entries: 256 (order: -2, 1024 bytes)
TCP: Hash tables configured (established 512 bind 256)
TCP reno registered
Realtek GPIO Driver for Flash Reload Default
NET: Registered protocol family 21
squashfs: version 3.2 (2007/01/02) Phillip Lougher
NTFS driver 2.1.27 [Flags: R/O].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.2.4.2 $ 1 ports, IRQ sharing disabled
netlog start
serial8250: ttyS0 at MMIO 0x0 (irq = 12) is a 16550A
PPP generic driver version 2.4.2
NET: Registered protocol family 24
8139cp Ethernet driver v0.0.7 (Feb 27, 2002)
eth0: RTL-8139C+ at 0xb8018000, 00:00:00:01:00:02, IRQ 26
RTL8672 NIC100 Probing..
eth0_sw0: RTL-8305 at port 0
eth0_sw1: RTL-8305 at port 1
eth0_sw2: RTL-8305 at port 2
eth0_sw3: RTL-8305 at port 3
flash device: 0x400000 at 0xbfc00000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "Physically mapped flash":
0x00000000-0x00010000 : "boot"
0x00010000-0x003f0000 : "rootfs"
0x003f0000-0x00400000 : "config"
dwc_otg: version 2.60a 22-NOV-2006
----init hcd-----
DWC_otg: Using DMA mode
dwc_otg lm0: DWC OTG Controller
dwc_otg lm0: new USB bus registered, assigned bus number 1
dwc_otg lm0: irq 11, io mem 0xb8030000
set OTG host to full speed !
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Patch NIC lost packet success!!
org usb cmd reg: 0
after patch usb cmd reg: 0
RTL8187SU(for RTL8672 platform) driver version 0.4.10 (2008-04-07-2009-11-13)
usb 1-1: new full speed USB device using dwc_otg and address 2
usb 1-1: not running at top speed; connect to a high speed hub
usb 1-1: configuration #1 chosen from 1 choice
set wifi rx sensitivity
Mac FF-FF-FF-FF-FF-FF
TX_FEW_INT patch --------- pool alloc
set OTG host to high speed !
DWC_otg: Init: Port Power? op_state=1
DWC_otg: Init: Power Port (0)
usbcore: registered new interface driver RTL8187SU(for RTL8672 platform)
u32 classifier
ip_conntrack version 2.4 (128 buckets, 1024 max) - 216 bytes per conntrack
usb 1-1: AIG tuning 1
ip_conntrack_pptp version 3.1 loaded
ip_conntrack_ipsec loaded
ip_conntrack_rtsp v0.6.21 loading
ip_nat_pptp version 3.0 loaded
ip_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-1: new high speed USB device using dwc_otg and address 3
usb 1-1: configuration #1 chosen from 1 choice
PCI device 1 can't be support
TCP cubic registered
Realtek SD2-FastPath v1.00beta_2.4.26-uc0
/proc/FastPath created
Realtek MCast FastPath
/proc/mc_FastPath created
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
ATM OAM F5 initialized.
ATM OAM F4 initialized.
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
ratm: RTL8670 SAR v0.0.2 (Jun 17, 2003)
/proc/AUTO_PVC_SEARCH created
SQUASHFS v2.0: patch superblock-inode-number from 0xd0 to 0x8f65e
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
CS_BANK ok! (minsize=3933, varsize=1356)
HS_BANK ok! (minsize=189, varsize=0)
set_msgqueue_max_size:210> set msgqidds.msg_qbytes=24696 OK

ddnspid=166
   CMD: /bin/LoadxmlConfig flash
Get old configuration file......
Old configuration file not exist
   CMD: /bin/sarctl pvcnumber 2
PVC Number = 2. Set Desc number per VC = 62
   CMD: /bin/ethctl wifi 0
(cmd2 = 0) set iocmd_reg:40091030
   CMD: /bin/ifconfig eth0 hw ether -------------
   CMD: /bin/ifconfig wlan0 hw ether -------------
   CMD: /bin/brctl addbr br0
   CMD: /bin/brctl stp br0 off
   CMD: /bin/brctl setfd br0 1
   CMD: /bin/brctl setageing br0 300
   CMD: /bin/brctl addif br0 eth0
device eth0 entered promiscuous mode
   CMD: /bin/ifconfig br0 192.168.1.1 netmask 255.255.255.0 mtu 1500
   CMD: /bin/ifconfig br0:3 192.168.249.1 netmask 255.255.255.252 mtu 1500
   CMD: /bin/CreatexmlConfig
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
   CMD: /bin/mpoad
  INFO: get DNS from manual

the file resolv.conf doesn't exist!
   CMD: /bin/dnsmasq -r /var/resolv.conf
   CMD: /bin/spppd
   CMD: /bin/vsntp -s hora.ngn.rima-tde.net -s 203.117.180.36
get mib chain info id failed
qosParms=ubr:pcr=6000
   CMD: mpoactl add vc0 pvc 8.32 encaps 1 qos ubr:pcr=6000 brppfixme atm_find_ci in sar_open!
pratm(itf 0): open 8.32
oe 2
itecreate: ch0 (8/32) 6000,0
m=1
sar_close
ATM OAM F5 initialized.
ATM OAM F4 initialized.
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
create: ch0 (8/32) 6000,0
applying workaround...done
bridge_pppoe():Interface's brpppoe flag configured
try_server_valid
hora.ngn.rima-tde.net: Unknown host.connect 203.117.180.36: Network is unreachable
   CMD: /bin/ifconfig vc0 hw ether ---------------
   CMD: /bin/ifconfig vc0 txqueuelen
   CMD: /bin/ifconfig vc0 up
PPPoE
   CMD: mpoactl set vc0 vlan 0 vid 0
   CMD: /bin/ifconfig ppp0 txqueuelen 0
   CMD: spppctl add 0 pppoe vc0 username adslppp@telefonicanetpa password adslppp gw 1 mru 1492 acname  ippt 0 debug 0
   CMD: spppctl katimer 100
PPP Connection (Continuous)...
   CMD: /bin/iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
   CMD: /bin/sarctl set_header 2 8 32
   CMD: /bin/sarctl set_pkta
qosParms=ubr:pcr=301
   CMD: mpoactl add vc1 pvc 8.36 encaps 1 qos ubr:fixme atm_find_ci in sar_open!
pcratm(itf 0): open 8.36
r=301 brpcreate: ch1 (8/36) 301,0
ppoe 2
item=1
sar_close
sar_close
ATM OAM F5 initialized.
ATM OAM F4 initialized.
Enable 8671G 1 function
Enable 8671 0 function
Enable 8672 function
create: ch0 (8/32) 6000,0
create: ch1 (8/36) 301,0
applying workaround...done
vsntp: Kicked to wake-up by SIGUSR1
try_server_valid
hora.ngn.rima-tde.net: Unknown host.connect 203.117.180.36: Network is unreachable
bridge_pppoe():Interface's brpppoe flag configured
   CMD: /bin/ifconfig vc1 hw ether ---------------
   CMD: /bin/ifconfig vc1 txqueuelen
   CMD: /bin/ifconfig vc1 up
PPPoE
   CMD: mpoactl set vc1 vlan 0 vid 0
   CMD: /bin/ifconfig ppp1 txqueuelen 0
   CMD: spppctl add 1 pppoe vc1 username @telefonicanetpi password adslppp gw 1 mru 1492 acname  ippt 0 debug 0
   CMD: spppctl katimer 100
PPP Connection (Continuous)...
   CMD: /bin/iptables -t nat -A POSTROUTING -o ppp1 -j MASQUERADE
   CMD: /bin/sarctl set_header 2 8 36
   CMD: /bin/sarctl set_pkta
   CMD: /bin/iptables -P INPUT ACCEPT
   CMD: /bin/iptables -P FORWARD ACCEPT
   CMD: /bin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
   CMD: /bin/iptables -A FORWARD -p tcp -o ppp+ --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
   CMD: /bin/iptables -A FORWARD -p tcp -i ppp+ --tcp-flags SYN,RST SYN -m tcpmss --mss 1452:1536 -j TCPMSS --set-mss 1452
   CMD: /bin/iptables -A INPUT -p udp --dport 520 -j ACCEPT
   CMD: /bin/iptables -A INPUT -d 224.0.0.0/4 -j ACCEPT
   CMD: /bin/iptables -A INPUT -i ! br0 -m mark --mark 0x1000 -j ACCEPT
   CMD: /bin/iptables -N ipfilter
   CMD: /bin/iptables -A FORWARD -j ipfilter
   CMD: /bin/iptables -N ipfilter_out
   CMD: /bin/iptables -A OUTPUT -j ipfilter_out
   CMD: /bin/iptables -N ipfilter_in
   CMD: /bin/iptables -A INPUT -j ipfilter_in
   CMD: /bin/iptables -N wan_In
   CMD: /bin/iptables -F ipfilter
   CMD: /bin/iptables -F ipfilter_in
   CMD: /bin/iptables -F ipfilter_out
   CMD: /bin/iptables -A ipfilter -m state --state ESTABLISHED,RELATED -j RETURN
   CMD: /bin/iptables -A ipfilter -d 224.0.0.0/4 -j RETURN
   CMD: /bin/iptables -F wan_In
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A wan_In -i ! br0 -p ...
   CMD: /bin/iptables -A ipfilter -i ! br0 -j wan_In
   CMD: /bin/iptables -A ipfilter_in -i ! br0 -j wan_In
   CMD: /bin/iptables -N dmz
   CMD: /bin/iptables -t nat -N dmz
   CMD: /bin/iptables -F dmz
   CMD: /bin/iptables -t nat -F dmz
   CMD: /bin/iptables -A ipfilter -j dmz
   CMD: /bin/iptables -N domainblk
   CMD: /bin/iptables -A INPUT -j domainblk
   CMD: /bin/iptables -A FORWARD -j domainblk
   CMD: /bin/iptables -A OUTPUT -j domainblk
   CMD: /bin/iptables -A INPUT -d 127.0.0.1 -j ACCEPT
   CMD: /bin/iptables -N urlblock
   CMD: /bin/iptables -A FORWARD -j urlblock
   CMD: /bin/iptables -N portfw
   CMD: /bin/iptables -A FORWARD -j portfw
   CMD: /bin/iptables -t nat -N portfw
   CMD: /bin/iptables -t nat -A PREROUTING -j portfw
   CMD: /bin/iptables -F portfw
   CMD: /bin/iptables -t nat -F portfw
   CMD: /bin/iptables -t nat -A PREROUTING -j dmz
   CMD: /bin/iptables -N macfilter
   CMD: /bin/ebtables -N macfilter
   CMD: /bin/ebtables -A FORWARD -j macfilter
   CMD: /bin/ebtables -A INPUT -j macfilter
   CMD: /bin/iptables -F macfilter
   CMD: /bin/ebtables -F macfilter
   CMD: /bin/iptables -A FORWARD -j macfilter
   CMD: /bin/iptables -A INPUT -s 192.168.1.1 -d 192.168.1.1 -j ACCEPT
   CMD: /bin/ethctl conntrack killall
   CMD: /bin/ifconfig eth0 up
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
br0: port 1(eth0) entering learning state
eth0: Promiscuous mode enabled.
   CMD: /bin/slogd -n -s 16384 -l 6 ...
/bin/slogd -n -s 16384 -l 6 ...

InitAdslMode....

InitAdsl
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
set default SSID ----------
   CMD: /bin/iwpriv wlan0 set_mib regdomain=3
   CMD: /bin/iwpriv wlan0 set_mib ssid=---------nanai------
   CMD: /bin/iwpriv wlan0 set_mib opmode=16
   CMD: /bin/iwpriv wlan0 set_mib RFChipID=7
   CMD: /bin/iwpriv wlan0 set_mib Diversity=0
   CMD: /bin/iwpriv wlan0 set_mib DefaultAnt=0
   CMD: /bin/iwpriv wlan0 set_mib initialGain=4
   CMD: /bin/iwpriv wlan0 set_mib shortretry=6
   CMD: /bin/iwpriv wlan0 set_mib longretry=6
   CMD: /bin/iwpriv wlan0 set_mib TxPowerCCK=0c0c0c0c0c0c0c0c0c0c0c0c0c0c
   CMD: /bin/iwpriv wlan0 set_mib TxPowerOFDM=1717171717171717171717171717
   CMD: /bin/iwpriv wlan0 set_mib bcnint=100
   CMD: /bin/iwpriv wlan0 set_mib channel=0
   CMD: /bin/iwpriv wlan0 set_mib basicrates=15
   CMD: /bin/iwpriv wlan0 set_mib oprates=4095
   CMD: /bin/iwpriv wlan0 set_mib autorate=1
   CMD: /bin/iwpriv wlan0 set_mib rtsthres=2347
   CMD: /bin/iwpriv wlan0 set_mib fragthres=2346
   CMD: /bin/iwpriv wlan0 set_mib expired_time=30000
   CMD: /bin/iwpriv wlan0 set_mib preamble=0
   CMD: /bin/iwpriv wlan0 set_mib hiddenAP=0
   CMD: /bin/iwpriv wlan0 set_mib bcnadv=1
   CMD: /bin/iwpriv wlan0 set_mib dtimperiod=1
   CMD: /bin/iwpriv wlan0 set_mib aclnum=0
   CMD: /bin/iwpriv wlan0 set_mib aclmode=0
   CMD: /bin/iwpriv wlan0 set_mib wsc_enable=0
   CMD: /bin/iwpriv wlan0 set_mib authtype=2
   CMD: /bin/iwpriv wlan0 set_mib vo_txop=47
   CMD: /bin/iwpriv wlan0 set_mib vo_ecwmax=3
   CMD: /bin/iwpriv wlan0 set_mib vo_ecwmin=2
   CMD: /bin/iwpriv wlan0 set_mib vo_aifsn=1
   CMD: /bin/iwpriv wlan0 set_mib vi_txop=94
   CMD: /bin/iwpriv wlan0 set_mib vi_ecwmax=4
   CMD: /bin/iwpriv wlan0 set_mib vi_ecwmin=3
   CMD: /bin/iwpriv wlan0 set_mib vi_aifsn=1
   CMD: /bin/iwpriv wlan0 set_mib be_txop=0
   CMD: /bin/iwpriv wlan0 set_mib be_ecwmax=6
   CMD: /bin/iwpriv wlan0 set_mib be_ecwmin=4
   CMD: /bin/iwpriv wlan0 set_mib be_aifsn=3
   CMD: /bin/iwpriv wlan0 set_mib bk_txop=0
   CMD: /bin/iwpriv wlan0 set_mib bk_ecwmax=10
   CMD: /bin/iwpriv wlan0 set_mib bk_ecwmin=4
   CMD: /bin/iwpriv wlan0 set_mib bk_aifsn=7
   CMD: /bin/iwpriv wlan0 set_mib sta_vo_txop=47
   CMD: /bin/iwpriv wlan0 set_mib sta_vo_ecwmax=3
   CMD: /bin/iwpriv wlan0 set_mib sta_vo_ecwmin=2
   CMD: /bin/iwpriv wlan0 set_mib sta_vo_aifsn=2
   CMD: /bin/iwpriv wlan0 set_mib sta_vi_txop=94
   CMD: /bin/iwpriv wlan0 set_mib sta_vi_ecwmax=4
   CMD: /bin/iwpriv wlan0 set_mib sta_vi_ecwmin=3
   CMD: /bin/iwpriv wlan0 set_mib sta_vi_aifsn=2
   CMD: /bin/iwpriv wlan0 set_mib sta_be_txop=0
   CMD: /bin/iwpriv wlan0 set_mib sta_be_ecwmax=10
   CMD: /bin/iwpriv wlan0 set_mib sta_be_ecwmin=4
   CMD: /bin/iwpriv wlan0 set_mib sta_be_aifsn=3
   CMD: /bin/iwpriv wlan0 set_mib sta_bk_txop=0
   CMD: /bin/iwpriv wlan0 set_mib sta_bk_ecwmax=10
   CMD: /bin/iwpriv wlan0 set_mib sta_bk_ecwmin=4
   CMD: /bin/iwpriv wlan0 set_mib sta_bk_aifsn=7
   CMD: /bin/iwpriv wlan0 set_mib encmode=2
   CMD: /bin/iwpriv wlan0 set_mib 802_1x=1
   CMD: /bin/iwpriv wlan0 set_mib band=3
   CMD: /bin/iwpriv wlan0 set_mib lowestMlcstRate=0
   CMD: /bin/iwpriv wlan0 set_mib cts2self=1
   CMD: /bin/iwpriv wlan0 set_mib disable_protection=1
   CMD: /bin/iwpriv wlan0 set_mib block_relay=0
   CMD: /bin/brctl wlanblock br0 0
   CMD: /bin/iwpriv wlan0 set_mib qos_enable=0
   CMD: /bin/iwpriv wlan0 set_mib DIG_enable=0
START WPS SETUP!


   CMD: /bin/mkdir -p /var/wps/
   CMD: /bin/cp /etc/simplecfgservice.xml /var/wps/
CMD ARGS:  -start -c /var/wscd.conf -w wlan0 -fi /var/wscd-wlan0.fifo
Writing file /var/wscd.conf...

WiFi Simple Config v1.5 (2010.04.19-07:37+0000).

Total WPA/WPA2 number is 1
   CMD: /bin/iwcontrol wlan0
   CMD: /bin/netlogger
netlogger is up
   CMD: /bin/iptables -t mangle -D PREROUTING -i ! br0 -p TCP --dport 7547 -j MARK --set-mark 0x1000
iptables: Bad rule (does a matching rule exist in that chain?)
   CMD: /bin/iptables -t nat -D PREROUTING -i ! br0 -p TCP --dport 7547 -j RETURN
iptables: Bad rule (does a matching rule exist in that chain?)
   CMD: /bin/iptables -t mangle -A PREROUTING -i ! br0 -p TCP --dport 7547 -j MARK --set-mark 0x1000
   CMD: /bin/iptables -t nat -I PREROUTING -i ! br0 -p TCP --dport 7547 -j RETURN
Interface doesn't accept private ioctl...
89F1: Operation not permitted
   CMD: /bin/cwmpClient
   CMD: /bin/boa
   CMD: /bin/udhcpd -B /var/udhcpd/udhcpd.conf
udhcp server/relay (v0.9.9-pre) started
Run Server and Relay functions.

dhcpd server read configfile:poolname=default
LastMemberQueryInterval:1000
New RE8306 Driver
IGMP enabled!
IGMP Snooping: enabled
   CMD: /bin/iptables -t mangle -N mangle_ipq
Listening on Socket/br0
Sending on   Socket/br0
   CMD: /bin/iptables -t mangle -A FORWARD -j mangle_ipq
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0x00/0xe0 -j CLASSIFY --set-class 0x00:0x00
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0x20/0xe0 -j CLASSIFY --set-class 0x00:0x01
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0x40/0xe0 -j CLASSIFY --set-class 0x00:0x02
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0x60/0xe0 -j CLASSIFY --set-class 0x00:0x03

cwmp_flag=30
<main.c>Set No Debug Message!
<cwmp_utility.c>Set No Debug Message[1]
<main.c>Set Delay!
<cwmp_utility.c>Set Delay[30]
<cwmp_utility.c>Set gNotifyBringAllWanIPinInform[0]
<cwmp_utility.c>Set gBringLanMacAddrInInform[1]
<cwmp_utility.c>Set gTR069_SSLAllowSelfSignedCert[0]

enter cwmp_main!
Start cwmp_main() !
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0x80/0xe0 -j CLASSIFY --set-class 0x00:0x04
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0xa0/0xe0 -j CLASSIFY --set-class 0x00:0x05
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0xc0/0xe0 -j CLASSIFY --set-class 0x00:0x06
   CMD: /bin/iptables -t mangle -A mangle_ipq -i br0 -m tos --tos 0xe0/0xe0 -j CLASSIFY --set-class 0x00:0x07

iptables -t mangle -A OUTPUT -p udp --dport 53 -j CLASSIFY --set-class
Got PID 386 from TR069
   CMD: /bin/tc qdisc add dev vc0 parent 1:1 handle 2: pfifo limit 10
   CMD: /bin/tc qdisc add dev vc0 parent 1:2 handle 3: pfifo limit 10
   CMD: /bin/tc qdisc add dev vc0 parent 1:3 handle 4: pfifo limit 10
   CMD: /bin/tc qdisc add dev vc0 parent 1:4 handle 5: pfifo limit 10
   CMD: /bin/iptables -t mangle -A FORWARD -i br0 ...--set-mark 256
   CMD: /bin/iptables -t mangle -A FORWARD -i br0 ...--set-class 0x00:0x06
   CMD: /bin/CreatexmlConfig
start monitor QoS!
[+] elvecinoo hack - nov2011