Guest User

Untitled

a guest
May 18th, 2025
58
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.25 KB | None | 0 0
  1. [ 0.000000] Linux version 6.6.84 (root@firefly-rk3399) (riscv64-unknown-linux-gnu-gcc (g2ee5e430018) 12.2.0, GNU ld (GNU Binutils) 2.40.0.20230214) #1 SMP PREEMPT Mon Mar 24 01:24:36 EET 2025
  2. [ 0.000000] Machine model: Milk-V Jupiter
  3. [ 0.000000] SBI specification v1.0 detected
  4. [ 0.000000] SBI implementation ID=0x1 Version=0x10003
  5. [ 0.000000] SBI IPI extension detected
  6. [ 0.000000] SBI RFENCE extension detected
  7. [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
  8. [ 0.000000] printk: bootconsole [sbi0] enabled
  9. [ 0.000000] efi: UEFI not found.
  10. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065600000, size 384 MiB
  11. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  12. [ 0.000000] OF: reserved mem: 0x0000000065600000..0x000000007d5fffff (393216 KiB) map reusable linux,cma
  13. [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable mmode_resv0@0
  14. [ 0.000000] Reserved memory: created DMA memory pool at 0x000000002ff40000, size 0 MiB
  15. [ 0.000000] OF: reserved mem: initialized node dpu_reserved@2ff40000, compatible id shared-dma-pool
  16. [ 0.000000] OF: reserved mem: 0x000000002ff40000..0x000000002fffffff (768 KiB) nomap non-reusable dpu_reserved@2ff40000
  17. [ 0.000000] OF: reserved mem: 0x0000000030000000..0x00000000301fffff (2048 KiB) nomap non-reusable rcpu_mem_heap@30000000
  18. [ 0.000000] OF: reserved mem: 0x0000000030200000..0x0000000030202fff (12 KiB) nomap non-reusable vdev0vring0@30200000
  19. [ 0.000000] OF: reserved mem: 0x0000000030203000..0x0000000030205fff (12 KiB) nomap non-reusable vdev0vring1@30203000
  20. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000030206000, size 0 MiB
  21. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@30206000, compatible id shared-dma-pool
  22. [ 0.000000] OF: reserved mem: 0x0000000030206000..0x00000000302fbfff (984 KiB) nomap non-reusable vdev0buffer@30206000
  23. [ 0.000000] OF: reserved mem: 0x00000000302fc000..0x00000000302fffff (16 KiB) nomap non-reusable rsc_table@302fc000
  24. [ 0.000000] OF: reserved mem: 0x0000000030300000..0x000000003033ffff (256 KiB) nomap non-reusable rcpu_mem_snapshots@30300000
  25. [ 0.000000] OF: reserved mem: 0x0000000030340000..0x000000003037ffff (256 KiB) nomap non-reusable rcpu_mem_dtb@30300000
  26. [ 0.000000] OF: reserved mem: 0x000000007f000000..0x000000007fffffff (16384 KiB) map non-reusable framebuffer@7f000000
  27. [ 0.000000] OF: reserved mem: 0x00000000c0800000..0x00000000c083ffff (256 KiB) nomap non-reusable mem@c0800000
  28. [ 0.000000] Zone ranges:
  29. [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000007fffffff]
  30. [ 0.000000] Normal [mem 0x0000000080000000-0x000000047fffffff]
  31. [ 0.000000] Movable zone start for each node
  32. [ 0.000000] Early memory node ranges
  33. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
  34. [ 0.000000] node 0: [mem 0x0000000000080000-0x000000002ff3ffff]
  35. [ 0.000000] node 0: [mem 0x000000002ff40000-0x000000003037ffff]
  36. [ 0.000000] node 0: [mem 0x0000000030380000-0x000000007fffffff]
  37. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff]
  38. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000047fffffff]
  39. [ 0.000000] On node 0, zone Normal: 524288 pages in unavailable ranges
  40. [ 0.000000] SBI HSM extension detected
  41. [ 0.000000] riscv: base ISA extensions acdfimv
  42. [ 0.000000] riscv: ELF capabilities acdfimv
  43. [ 0.000000] percpu: Embedded 29 pages/cpu s79016 r8192 d31576 u118784
  44. [ 0.000000] pcpu-alloc: s79016 r8192 d31576 u118784 alloc=29*4096
  45. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  46. [ 0.000000] Kernel command line: earlycon=sbi earlyprintk console=tty1 console=ttyS0,115200 loglevel=8 clk_ignore_unused swiotlb=65536 rdinit=/init root=/dev/mmcblk0p2 rootwait rootfstype=ext4 board=bpi-f3
  47. [ 0.000000] Unknown kernel command line parameters "board=bpi-f3", will be passed to user space.
  48. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
  49. [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  50. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4120576
  51. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  52. [ 0.000000] software IO TLB: area num 8.
  53. [ 0.000000] software IO TLB: mapped [mem 0x000000005d600000-0x0000000065600000] (128MB)
  54. [ 0.000000] Memory: 15865840K/16777216K available (16828K kernel code, 6911K rwdata, 8192K rodata, 2309K init, 563K bss, 518160K reserved, 393216K cma-reserved)
  55. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  56. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  57. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  58. [ 0.000000] Tracing variant of Tasks RCU enabled.
  59. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  60. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  61. [ 0.000000] riscv-intc: 64 local interrupts mapped
  62. [ 0.000000] plic: interrupt-controller@e0000000: mapped 159 interrupts with 8 handlers for 16 contexts.
  63. [ 0.000000] riscv: providing IPIs using SBI IPI extension
  64. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  65. [ 0.000000] riscv-timer: Timer interrupt in S-mode is available via sstc extension
  66. [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  67. [ 0.000001] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  68. [ 0.008450] Console: colour dummy device 80x25
  69. [ 0.012634] printk: console [tty1] enabled
  70. [ 0.017385] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  71. [ 0.027100] pid_max: default: 32768 minimum: 301
  72. [ 0.031983] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  73. [ 0.039472] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  74. [ 0.049487] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  75. [ 0.056383] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  76. [ 0.065647] riscv: ELF compat mode unsupported
  77. [ 0.065668] ASID allocator using 16 bits (65536 entries)
  78. [ 0.075541] rcu: Hierarchical SRCU implementation.
  79. [ 0.080312] rcu: Max phase no-delay instances is 1000.
  80. [ 0.086119] EFI services will not be available.
  81. [ 0.090741] smp: Bringing up secondary CPUs ...
  82. [ 0.099458] smp: Brought up 1 node, 8 CPUs
  83. [ 0.106738] devtmpfs: initialized
  84. [ 0.121964] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  85. [ 0.128963] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  86. [ 0.140895] pinctrl core: initialized pinctrl subsystem
  87. [ 0.144312] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  88. [ 0.150566] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  89. [ 0.156818] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  90. [ 0.164893] display class register
  91. [ 0.168174] thermal_sys: Registered thermal governor 'step_wise'
  92. [ 0.168220] cpuidle: using governor menu
  93. [ 0.202138] cpu3: Ratio of byte access time to unaligned word access is 2.22, unaligned accesses are fast
  94. [ 0.202138] cpu2: Ratio of byte access time to unaligned word access is 2.25, unaligned accesses are fast
  95. [ 0.202139] cpu5: Ratio of byte access time to unaligned word access is 1.65, unaligned accesses are fast
  96. [ 0.202139] cpu6: Ratio of byte access time to unaligned word access is 1.67, unaligned accesses are fast
  97. [ 0.202139] cpu4: Ratio of byte access time to unaligned word access is 1.59, unaligned accesses are fast
  98. [ 0.202145] cpu1: Ratio of byte access time to unaligned word access is 2.27, unaligned accesses are fast
  99. [ 0.202139] cpu7: Ratio of byte access time to unaligned word access is 1.57, unaligned accesses are fast
  100. [ 0.290207] cpu0: Ratio of byte access time to unaligned word access is 10.12, unaligned accesses are fast
  101. [ 0.297034] The real ratio of byte access time to unaligned word access should refer to the value of CPU0
  102. [ 0.306655] Cpu0 unaligned access is more efficient than nonboot cores, because of system bandwidth preemption.
  103. [ 0.316808] Nonboot cpus' unaligned access ratio measured simultaneously, but cpu0's measure is separately
  104. [ 0.326543] suspend: SBI SUSP extension detected
  105. [ 0.337215] /soc: Fixed dependency cycle(s) with /soc/hdmi@C0400500
  106. [ 0.342599] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc
  107. [ 0.347000] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/pinctrl@d401e000/hdmi_0_grp
  108. [ 0.355762] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/power-management@0/power-controller
  109. [ 0.365223] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
  110. [ 0.373815] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
  111. [ 0.382412] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
  112. [ 0.392936] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
  113. [ 0.400603] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
  114. [ 0.409417] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
  115. [ 0.419940] pinctrl-single d401e000.pinctrl: 148 pins, size 592
  116. [ 0.434368] /soc: Fixed dependency cycle(s) with /soc/hdmi@C0400500
  117. [ 0.437905] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc
  118. [ 0.444220] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
  119. [ 0.452743] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
  120. [ 0.461338] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
  121. [ 0.478577] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  122. [ 0.482542] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  123. [ 0.488868] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  124. [ 0.495721] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  125. [ 0.502058] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  126. [ 0.508915] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  127. [ 0.516817] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  128. [ 0.526192] mmp-pdma d4000000.pdma: PM domain power-domain@SPT_PD_BUS will not be powered off
  129. [ 0.534183] SCSI subsystem initialized
  130. [ 0.536999] libata version 3.00 loaded.
  131. [ 0.540677] usbcore: registered new interface driver usbfs
  132. [ 0.546104] usbcore: registered new interface driver hub
  133. [ 0.551499] usbcore: registered new device driver usb
  134. [ 0.559505] /soc/i2c@d401d800/spm8821@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/spm8821@41/regulators/DCDC_REG5
  135. [ 0.585087] spacemit-regulator spacemit-regulator@spm8821: DMA mask not set
  136. [ 0.585476] raid6: int64x8 gen() 1048 MB/s
  137. [ 0.644496] /soc/i2c@d401d800/spm8821@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/spm8821@41/regulators
  138. [ 0.653161] mc: Linux media interface: v0.10
  139. [ 0.656262] videodev: Linux video capture interface: v2.00
  140. [ 0.661769] raid6: int64x4 gen() 1472 MB/s
  141. [ 0.661827] pps_core: LinuxPPS API ver. 1 registered
  142. [ 0.671129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  143. [ 0.680330] PTP clock support registered
  144. [ 0.684992] Advanced Linux Sound Architecture Driver Initialized.
  145. [ 0.690967] Bluetooth: Core ver 2.22
  146. [ 0.694139] NET: Registered PF_BLUETOOTH protocol family
  147. [ 0.699504] Bluetooth: HCI device and connection manager initialized
  148. [ 0.705924] Bluetooth: HCI socket layer initialized
  149. [ 0.710869] Bluetooth: L2CAP socket layer initialized
  150. [ 0.716002] Bluetooth: SCO socket layer initialized
  151. [ 0.721259] vgaarb: loaded
  152. [ 0.734224] clocksource: Switched to clocksource riscv_clocksource
  153. [ 0.734223] raid6: int64x2 gen() 1639 MB/s
  154. [ 0.742409] VFS: Disk quotas dquot_6.6.0
  155. [ 0.745922] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  156. [ 0.760447] NET: Registered PF_INET protocol family
  157. [ 0.762957] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  158. [ 0.781895] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
  159. [ 0.787838] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  160. [ 0.795515] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  161. [ 0.798243] raid6: int64x1 gen() 1333 MB/s
  162. [ 0.804070] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  163. [ 0.807979] raid6: using algorithm int64x2 gen() 1639 MB/s
  164. [ 0.817398] TCP: Hash tables configured (established 131072 bind 65536)
  165. [ 0.827905] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
  166. [ 0.834674] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
  167. [ 0.842142] NET: Registered PF_UNIX/PF_LOCAL protocol family
  168. [ 0.848106] RPC: Registered named UNIX socket transport module.
  169. [ 0.853574] RPC: Registered udp transport module.
  170. [ 0.858332] RPC: Registered tcp transport module.
  171. [ 0.863105] RPC: Registered tcp-with-tls transport module.
  172. [ 0.868661] RPC: Registered tcp NFSv4.1 backchannel transport module.
  173. [ 0.876117] PCI: CLS 0 bytes, default 64
  174. [ 0.880461] Initialise system trusted keyrings
  175. [ 0.883908] workingset: timestamp_bits=46 max_order=22 bucket_order=0
  176. [ 0.883993] Unpacking initramfs...
  177. [ 0.886236] raid6: .... xor() 846 MB/s, rmw enabled
  178. [ 0.886242] raid6: using intx1 recovery algorithm
  179. [ 0.890855] NFS: Registering the id_resolver key type
  180. [ 0.908566] Key type id_resolver registered
  181. [ 0.912778] Key type id_legacy registered
  182. [ 0.916900] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  183. [ 0.923644] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  184. [ 0.932701] Key type cifs.idmap registered
  185. [ 0.935300] ntfs: driver 2.1.32 [Flags: R/W].
  186. [ 0.939723] ntfs3: Enabled Linux POSIX ACLs support
  187. [ 0.944636] ntfs3: Read-only LZX/Xpress compression included
  188. [ 0.950391] fuse: init (API version 7.39)
  189. [ 0.954913] SGI XFS with ACLs, security attributes, quota, no debug enabled
  190. [ 0.982863] jitterentropy: Initialization failed with host not compliant with requirements: 9
  191. [ 0.988591] NET: Registered PF_ALG protocol family
  192. [ 0.993447] xor: measuring software checksum speed
  193. [ 0.998978] 8regs : 4720 MB/sec
  194. [ 1.003430] 32regs : 4539 MB/sec
  195. [ 1.007739] rvv : 5593 MB/sec
  196. [ 1.011563] xor: using function: rvv (5593 MB/sec)
  197. [ 1.016434] async_tx: api initialized (async)
  198. [ 1.020860] Key type asymmetric registered
  199. [ 1.025023] Asymmetric key parser 'x509' registered
  200. [ 1.030414] io scheduler mq-deadline registered
  201. [ 1.034583] io scheduler kyber registered
  202. [ 1.038706] io scheduler bfq registered
  203. [ 1.052501] spacemit-pmic-pinctrl spacemit-pinctrl@spm8821: DMA mask not set
  204. [ 1.054259] Freeing initrd memory: 6288K
  205. [ 1.060774] k1x-dwc-pcie ca400000.pcie: has no power on gpio.
  206. [ 1.063152] k1x-dwc-pcie ca400000.pcie: host bridge /soc/pcie@ca400000 ranges:
  207. [ 1.073875] k1x-dwc-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x009f002000
  208. [ 1.082266] k1x-dwc-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000
  209. [ 1.190802] k1x-dwc-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G
  210. [ 2.196140] k1x-dwc-pcie ca400000.pcie: Phy link never came up
  211. [ 2.199563] k1x-dwc-pcie ca400000.pcie: PCI host bridge to bus 0001:00
  212. [ 2.205756] pci_bus 0001:00: root bus resource [bus 00-ff]
  213. [ 2.211281] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x9f002000-0x9f101fff])
  214. [ 2.220917] pci_bus 0001:00: root bus resource [mem 0x90000000-0x9effffff]
  215. [ 2.227887] pci 0001:00:00.0: [201f:0001] type 01 class 0x060400
  216. [ 2.233948] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  217. [ 2.240274] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
  218. [ 2.246662] pci 0001:00:00.0: supports D1
  219. [ 2.250688] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold
  220. [ 2.261152] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
  221. [ 2.264992] pci 0001:00:00.0: BAR 0: assigned [mem 0x90000000-0x900fffff]
  222. [ 2.271796] pci 0001:00:00.0: BAR 1: assigned [mem 0x90100000-0x901fffff]
  223. [ 2.278656] pci 0001:00:00.0: PCI bridge to [bus 01]
  224. [ 2.285634] pcieport 0001:00:00.0: PME: Signaling with IRQ 66
  225. [ 2.289955] pcieport 0001:00:00.0: AER: enabled with IRQ 66
  226. [ 2.295823] k1x-dwc-pcie ca800000.pcie: has no power on gpio.
  227. [ 2.303203] k1x-dwc-pcie ca800000.pcie: host bridge /soc/pcie@ca800000 ranges:
  228. [ 2.308301] k1x-dwc-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x00b7002000
  229. [ 2.316688] k1x-dwc-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000
  230. [ 2.325098] k1x-dwc-pcie ca800000.pcie: MEM 0x00b0000000..0x00b6ffffff -> 0x00b0000000
  231. [ 2.433593] k1x-dwc-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G
  232. [ 3.438787] k1x-dwc-pcie ca800000.pcie: Phy link never came up
  233. [ 3.441877] k1x-dwc-pcie ca800000.pcie: PCI host bridge to bus 0002:00
  234. [ 3.448386] pci_bus 0002:00: root bus resource [bus 00-ff]
  235. [ 3.453920] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xb7002000-0xb7101fff])
  236. [ 3.463816] pci_bus 0002:00: root bus resource [mem 0xa0000000-0xafffffff pref]
  237. [ 3.471192] pci_bus 0002:00: root bus resource [mem 0xb0000000-0xb6ffffff]
  238. [ 3.478160] pci 0002:00:00.0: [201f:0001] type 01 class 0x060400
  239. [ 3.484222] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
  240. [ 3.490552] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x000fffff]
  241. [ 3.496935] pci 0002:00:00.0: supports D1
  242. [ 3.500965] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold
  243. [ 3.511383] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  244. [ 3.515210] pci 0002:00:00.0: BAR 0: assigned [mem 0xb0000000-0xb00fffff]
  245. [ 3.522022] pci 0002:00:00.0: BAR 1: assigned [mem 0xb0100000-0xb01fffff]
  246. [ 3.528881] pci 0002:00:00.0: PCI bridge to [bus 01]
  247. [ 3.535931] pcieport 0002:00:00.0: PME: Signaling with IRQ 70
  248. [ 3.540057] pcieport 0002:00:00.0: AER: enabled with IRQ 70
  249. [ 3.591313] d4017000.serial: ttyS0 at MMIO 0xd4017000 (irq = 74, base_baud = 921250) is a UART1
  250. [ 3.597366] printk: console [ttyS0] enabled
  251. [ 3.605663] printk: bootconsole [sbi0] disabled
  252. [ 3.619325] d4017100.uart: ttyS1 at MMIO 0xd4017100 (irq = 75, base_baud = 3600000) is a UART2
  253. [ 3.653299] PVR_K: 1: Read BVNC 36.29.52.182 from HW device registers
  254. [ 3.660039] PVR_K: 1: RGX Device registered BVNC 36.29.52.182 with 1 core in the system
  255. [ 3.669075] [drm] Initialized pvr 24.2.6603887 20170530 for cac00000.imggpu on minor 0
  256. [ 3.685128] loop: module loaded
  257. [ 3.690854] Rounding down aligned max_sectors from 4294967295 to 4294967288
  258. [ 3.698159] db_root: cannot open: /etc/target
  259. [ 3.703761] k1x-qspi d420c000.spi: config mfp for cs:[0]
  260. [ 3.709355] k1x-qspi d420c000.spi: AHB buf size: 512
  261. [ 3.714981] k1x-qspi d420c000.spi: RX buffer overflow
  262. [ 3.720216] spi-nor spi4.0: gd25q64 (8192 Kbytes)
  263. [ 3.733260] k1x-qspi d420c000.spi: Runtime PM usage count underflow!
  264. [ 3.740879] CAN device driver interface
  265. [ 4.008455] usbcore: registered new interface driver cdc_ether
  266. [ 4.014437] usbcore: registered new interface driver cdc_subset
  267. [ 4.020464] usbcore: registered new interface driver zaurus
  268. [ 4.027848] spacemit-k1x-combphy c0b10000.phy: USB3 PHY init.
  269. [ 4.033742] spacemit-k1x-combphy c0b10000.phy: USB3 PHY init lfps thres 3
  270. [ 4.042721] mv-ehci mv-ehci1: Spacemit EHCI
  271. [ 4.047038] mv-ehci mv-ehci1: new USB bus registered, assigned bus number 1
  272. [ 4.054292] mv-ehci mv-ehci1: irq 82, io mem 0xc0980100
  273. [ 4.074230] mv-ehci mv-ehci1: USB 2.0 started, EHCI 1.00
  274. [ 4.080363] hub 1-0:1.0: USB hub found
  275. [ 4.084215] hub 1-0:1.0: 1 port detected
  276. [ 4.089375] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  277. [ 4.095014] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  278. [ 4.103002] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000008000000090
  279. [ 4.112661] xhci-hcd xhci-hcd.0.auto: irq 81, io mem 0xc0a00000
  280. [ 4.118829] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  281. [ 4.124410] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
  282. [ 4.132181] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  283. [ 4.139426] hub 2-0:1.0: USB hub found
  284. [ 4.143275] hub 2-0:1.0: 1 port detected
  285. [ 4.147595] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  286. [ 4.156295] hub 3-0:1.0: USB hub found
  287. [ 4.160151] hub 3-0:1.0: 1 port detected
  288. [ 4.164671] usbcore: registered new interface driver uas
  289. [ 4.170121] usbcore: registered new interface driver usb-storage
  290. [ 4.176513] spacemit-usb3-hub soc:usb3hub@0: v1.0.2
  291. [ 4.198234] spacemit-usb3-hub soc:usb3hub@0: onboard usb hub driver probed, hub configured
  292. [ 4.207120] K1X_UDC: mv_udc_probe enter ...
  293. [ 4.211762] mv-udc mv-udc: use 32bit DMA mask
  294. [ 4.216490] mv_udc: dqh size = 0x800 udc->ep_dqh_dma = 0x280a000
  295. [ 4.223311] mv-udc mv-udc: successful probe UDC device without clock gating.
  296. [ 4.230715] f_tcm: UAS support multiple cmds
  297. [ 4.235083] Gt9xx driver installing..
  298. [ 4.239394] spacemit-pmic-pwrkey spacemit-pwrkey@spm8821: DMA mask not set
  299. [ 4.302551] input: spacemit pwrkey as /devices/platform/soc/d401d800.i2c/i2c-8/8-0041/spacemit-pwrkey@spm8821/input/input0
  300. [ 4.314725] spacemit-pmic-rtc spacemit-rtc@spm8821: DMA mask not set
  301. [ 4.342254] usb 1-1: new high-speed USB device number 2 using mv-ehci
  302. [ 4.356774] spacemit-pmic-rtc spacemit-rtc@spm8821: registered as rtc0
  303. [ 4.369123] spacemit-pmic-rtc spacemit-rtc@spm8821: setting system clock to 2025-05-18T20:11:43 UTC (1747599103)
  304. [ 4.380517] i2c_dev: i2c /dev entries driver
  305. [ 4.387491] MVX dev: Linlon v5276 identified. cores=2, nlsid=4, id=0, fuse=00000000, hw_id=00005276, hw_rev=00000050
  306. [ 4.399285] d420a000.csiphy begin to probe
  307. [ 4.403545] d420a000.csiphy probed
  308. [ 4.403644] d4206000.csiphy begin to probe
  309. [ 4.411277] d4206000.csiphy probed
  310. [ 4.412303] d420a000.ccic probed in k1x_ccic_probe
  311. [ 4.416467] d420a800.ccic probed in k1x_ccic_probe
  312. [ 4.421991] d4206000.ccic probed in k1x_ccic_probe
  313. [ 4.433621] acquire ccic0 ctrl dev succeed
  314. [ 4.442678] acquire ccic1 ctrl dev succeed
  315. [ 4.446836] acquire ccic2 ctrl dev succeed
  316. [ 4.456359] usbcore: registered new interface driver uvcvideo
  317. [ 4.466785] device-mapper: uevent: version 1.0.3
  318. [ 4.471788] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
  319. [ 4.480811] device-mapper: multipath round-robin: version 1.2.0 loaded
  320. [ 4.487469] device-mapper: multipath queue-length: version 0.2.0 loaded
  321. [ 4.494170] device-mapper: multipath service-time: version 0.3.0 loaded
  322. [ 4.494248] usb 2-1: new high-speed USB device number 2 using xhci-hcd
  323. [ 4.500857] device-mapper: multipath historical-service-time: version 0.1.1 loaded
  324. [ 4.508883] hub 1-1:1.0: USB hub found
  325. [ 4.515217] Bluetooth: HCI UART driver ver 2.3
  326. [ 4.519024] hub 1-1:1.0: 4 ports detected
  327. [ 4.523418] Bluetooth: HCI UART protocol H4 registered
  328. [ 4.532775] Bluetooth: HCI UART protocol Three-wire (H5) registered
  329. [ 4.542544] sdhci: Secure Digital Host Controller Interface driver
  330. [ 4.548837] sdhci: Copyright(c) Pierre Ossman
  331. [ 4.553244] sdhci-pltfm: SDHCI platform and OF driver helper
  332. [ 4.559617] sdhci-spacemit d4280000.sdh: Got CD GPIO
  333. [ 4.602252] mmc0: SDHCI controller on d4280000.sdh [d4280000.sdh] using ADMA
  334. [ 4.635987] mmc1: SDHCI controller on d4280800.sdh [d4280800.sdh] using ADMA
  335. [ 4.643166] sdio: save sdio_host <- (____ptrval____)
  336. [ 4.667275] hub 2-1:1.0: USB hub found
  337. [ 4.671263] hub 2-1:1.0: 4 ports detected
  338. [ 4.681523] mmc0: set tx_delaycode: 127
  339. [ 4.688376] mmc0: pass window [0 82)
  340. [ 4.696348] mmc0: pass window [85 204)
  341. [ 4.700307] mmc0: pass window [205 206)
  342. [ 4.704353] mmc0: pass window [207 208)
  343. [ 4.709918] mmc0: pass window [220 255)
  344. [ 4.713905] mmc0: tuning done, use the firstly delay_code:144
  345. [ 4.719717] mmc0: new ultra high speed SDR104 SDXC card at address 59b4
  346. [ 4.727130] mmcblk0: mmc0:59b4 6aLHR 119 GiB
  347. [ 4.738025] mmcblk0: p1 p2
  348. [ 4.783904] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
  349. [ 4.799034] mmc2: Failed to initialize a non-removable card
  350. [ 4.799045] mmc2: SDHCI controller on d4281000.sdh [d4281000.sdh] using ADMA
  351. [ 4.814821] usbcore: registered new interface driver usbhid
  352. [ 4.820505] usbhid: USB HID core driver
  353. [ 4.825562] remoteproc remoteproc0: rcpu_rproc is available
  354. [ 4.834320] remoteproc remoteproc0: powering up rcpu_rproc
  355. [ 4.849436] remoteproc remoteproc0: Booting fw image esos.elf, size 562152
  356. [ 4.860024] Failed to find the rcpu_dtb_mem
  357. [ 4.864340] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vdev0buffer@30206000
  358. [ 4.875168] hub 3-1:1.0: USB hub found
  359. [ 4.877228] virtio_rpmsg_bus virtio0: rpmsg host is online
  360. [ 4.879164] hub 3-1:1.0: 4 ports detected
  361. [ 4.884498] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7)
  362. [ 4.895387] remoteproc remoteproc0: remote processor rcpu_rproc is now up
  363. [ 4.903243] riscv-pmu-sbi: SBI PMU extension is available
  364. [ 4.908795] riscv-pmu-sbi: 16 firmware and 18 hardware counters
  365. [ 4.918551] xt_time: kernel timezone is -0000
  366. [ 4.923008] IPVS: Registered protocols (TCP, UDP)
  367. [ 4.927751] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
  368. [ 4.934283] usb 1-1.3: new full-speed USB device number 3 using mv-ehci
  369. [ 4.935257] IPVS: ipvs loaded.
  370. [ 4.944906] IPVS: [rr] scheduler registered.
  371. [ 4.949347] Initializing XFRM netlink socket
  372. [ 4.953772] NET: Registered PF_INET6 protocol family
  373. [ 4.960000] Segment Routing with IPv6
  374. [ 4.963781] In-situ OAM (IOAM) with IPv6
  375. [ 4.967838] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  376. [ 4.974398] NET: Registered PF_PACKET protocol family
  377. [ 4.979564] Bridge firewalling registered
  378. [ 4.983632] can: controller area network core
  379. [ 4.988071] NET: Registered PF_CAN protocol family
  380. [ 4.992918] can: raw protocol
  381. [ 4.995904] can: broadcast manager protocol
  382. [ 5.000130] can: netlink gateway - max_hops=1
  383. [ 5.004719] Bluetooth: RFCOMM TTY layer initialized
  384. [ 5.009662] Bluetooth: RFCOMM socket layer initialized
  385. [ 5.014878] Bluetooth: RFCOMM ver 1.11
  386. [ 5.018672] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  387. [ 5.024048] Bluetooth: BNEP socket layer initialized
  388. [ 5.029050] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  389. [ 5.035028] Bluetooth: HIDP socket layer initialized
  390. [ 5.040083] 8021q: 802.1Q VLAN Support v1.8
  391. [ 5.044362] Key type dns_resolver registered
  392. [ 5.059237] Loading compiled-in X.509 certificates
  393. [ 5.074127] Btrfs loaded, zoned=no, fsverity=no
  394. [ 5.090654] suspend: SBI SUSP extension detected
  395. [ 5.096670] [drm] spacemit_dpu_bind()
  396. [ 5.100795] spacemit-dpu-drv soc:port@c0440000: assigned reserved memory node dpu_reserved@2ff40000
  397. [ 5.110392] [drm] dpu plane init ok
  398. [ 5.113931] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound soc:port@c0440000 (ops dpu_component_ops)
  399. [ 5.124343] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound c0400500.hdmi (ops spacemit_hdmi_ops)
  400. [ 5.134178] [drm] spacemit_hdmi_connector_detect() hdmi status connected
  401. [ 5.141379] [drm] Initialized spacemit 1.0.0 20231115 for c0440000.display-subsystem-hdmi on minor 1
  402. [ 5.150640] [drm] spacemit_hdmi_connector_detect() hdmi status connected
  403. [ 5.157426] [drm] spacemit_hdmi_get_edid_block() len 128
  404. [ 5.171480] input: Logitech G300s Optical Gaming Mouse as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C246.0001/input/input1
  405. [ 5.185442] hid-generic 0003:046D:C246.0001: input: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-mv-ehci1-1.3/input0
  406. [ 5.186267] [drm] spacemit_hdmi_get_edid_block() len 128
  407. [ 5.200119] input: Logitech G300s Optical Gaming Mouse Keyboard as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C246.0002/input/input2
  408. [ 5.218119] [drm] spacemit_crtc_atomic_enable(power on)
  409. [ 5.218196] [drm] dpu_init
  410. [ 5.218250] [drm] spacemit_hdmi_encoder_enable()
  411. [ 5.218266] [drm] spacemit_hdmi_setup() id 0xa28501, hdmi 8bpc
  412. [ 5.218508] [drm] DPU type 0 id 2 Start!
  413. [ 5.235234] Console: switching to colour frame buffer device 240x67
  414. [ 5.276502] input: Logitech G300s Optical Gaming Mouse as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C246.0002/input/input3
  415. [ 5.281257] spacemit-drm-drv c0440000.display-subsystem-hdmi: [drm] fb0: spacemitdrmfb frame buffer device
  416. [ 5.287232] hid-generic 0003:046D:C246.0002: input,hiddev96: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-mv-ehci1-1.3/input1
  417. [ 5.336534] spacemit-socinfo soc:socinfo@0: Spacemit: CPU[M1-8571] REV[C] DRO[130] Detected
  418. [ 5.348677] cam_inf:snr (cam_sensor_probe 1504): camera sensor0 probed
  419. [ 5.356435] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  420. [ 5.371518] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  421. [ 5.378098] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  422. [ 5.386149] clk: Not disabling unused clocks
  423. [ 5.390868] ALSA device list:
  424. [ 5.394139] No soundcards found.
  425. [ 5.399420] Freeing unused kernel image (initmem) memory: 2308K
  426. [ 5.405917] Run /init as init process
  427. [ 5.409914] with arguments:
  428. [ 5.413185] /init
  429. [ 5.415756] with environment:
  430. [ 5.419230] HOME=/
  431. [ 5.421857] TERM=linux
  432. [ 5.424864] board=bpi-f3
  433. [ 5.530329] usb 3-1.3: new SuperSpeed USB device number 3 using xhci-hcd
  434. [ 5.537248] usb 1-1.4: new full-speed USB device number 4 using mv-ehci
  435. [ 5.560147] usb-storage 3-1.3:1.0: USB Mass Storage device detected
  436. [ 5.570989] scsi host0: usb-storage 3-1.3:1.0
  437. [ 5.618748] EXT4-fs (mmcblk0p2): mounted filesystem 32539e08-a5c0-4084-9f32-0932043d95e3 r/w without journal. Quota mode: none.
  438. [ 5.767323] input: CM Storm Quickfire TKL 6keys as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.4/1-1.4:1.0/0003:2516:0011.0003/input/input4
  439. [ 5.886456] hid-generic 0003:2516:0011.0003: input: USB HID v1.10 Keyboard [CM Storm Quickfire TKL 6keys] on usb-mv-ehci1-1.4/input0
  440. [ 5.901556] input: CM Storm Quickfire TKL 6keys System Control as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.4/1-1.4:1.1/0003:2516:0011.0004/input/input5
  441. [ 5.974755] input: CM Storm Quickfire TKL 6keys Consumer Control as /devices/platform/soc/c0980100.ehci1/usb1/1-1/1-1.4/1-1.4:1.1/0003:2516:0011.0004/input/input6
  442. [ 5.989940] hid-generic 0003:2516:0011.0004: input: USB HID v1.10 Device [CM Storm Quickfire TKL 6keys] on usb-mv-ehci1-1.4/input1
  443. [ 6.142541] udevd[220]: starting version 3.2.14
  444. [ 6.595877] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
  445. [ 6.661191] sd 0:0:0:0: [sda] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB)
  446. [ 6.670067] sd 0:0:0:0: [sda] Write Protect is off
  447. [ 6.675309] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
  448. [ 6.681298] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  449. [ 6.694872] sda: sda1
  450. [ 6.697984] sd 0:0:0:0: [sda] Attached SCSI removable disk
  451. [ 11.602249] random: crng init done
  452. [ 11.647119] udevd[220]: specified group 'netdev' unknown
  453. [ 11.671714] udevd[223]: starting eudev-3.2.14
  454. [ 11.692696] udevd[223]: specified group 'netdev' unknown
  455. [ 11.904559] cam clk[csi_func]: 624000000
  456. [ 11.904580] cam clk[csi_func]: 624000000
  457. [ 11.904725] cam clk[ccic4x_func]: 624000000
  458. [ 11.908399] cam clk[csi_func]: 624000000
  459. [ 11.908433] cam clk[ccic4x_func]: 624000000
  460. [ 11.908437] ccic1 clock enabled
  461. [ 11.908628] cam clk[ccic4x_func]: 624000000
  462. [ 11.908759] ccic1 clock disabled
  463. [ 11.912976] ccic0 clock enabled
  464. [ 11.917485] ccic2 clock enabled
  465. [ 11.921484] ccic0 clock disabled
  466. [ 11.926408] ccic2 clock disabled
  467. [ 12.363849] EXT4-fs: Remounting file system with no journal so ignoring journalled data option
  468. [ 12.441670] EXT4-fs (mmcblk0p2): re-mounted 32539e08-a5c0-4084-9f32-0932043d95e3 ro. Quota mode: none.
  469. [ 12.574539] EXT4-fs: Remounting file system with no journal so ignoring journalled data option
  470. [ 12.647757] EXT4-fs (mmcblk0p2): re-mounted 32539e08-a5c0-4084-9f32-0932043d95e3 r/w. Quota mode: none.
  471. [ 12.702517] EXT4-fs (mmcblk0p1): mounted filesystem 5c205338-1b02-4bc9-a396-dc0fe556357f r/w with ordered data mode. Quota mode: none.
  472. [ 12.749472] Adding 131068k swap on /swap. Priority:5 extents:2 across:13107196k SS
  473. [ 16.360789] spacemit-rf-pwrseq rf-pwrseq: turn power on
  474. [ 16.375533] spacemit-rf-pwrseq rf-pwrseq: check voltage: 1800000
  475. [ 16.520924] sdhci-spacemit d4280800.sdh: card claims to support voltages below defined range
  476.  
Advertisement
Add Comment
Please, Sign In to add comment