armoon

boot failed.

Aug 16th, 2019
126
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. DDR Version 1.09 20171117
  2. In
  3. Channel 0: LPDDR3, 800MHz
  4. CS = 0
  5. MR0=0xD8
  6. MR1=0xD8
  7. MR2=0xD8
  8. MR3=0xD8
  9. MR4=0x1
  10. MR5=0x6
  11. MR6=0x3
  12. MR7=0x0
  13. MR8=0x1F
  14. MR9=0x1F
  15. MR10=0x1F
  16. MR11=0x1F
  17. MR12=0x1F
  18. MR13=0x1F
  19. MR14=0x1F
  20. MR15=0x1F
  21. MR16=0x1F
  22. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
  23. Channel 1: LPDDR3, 800MHz
  24. CS = 0
  25. MR0=0xD8
  26. MR1=0xD8
  27. MR2=0xD8
  28. MR3=0xD8
  29. MR4=0x1
  30. MR5=0x6
  31. MR6=0x3
  32. MR7=0x0
  33. MR8=0x1F
  34. MR9=0x1F
  35. MR10=0x1F
  36. MR11=0x1F
  37. MR12=0x1F
  38. MR13=0x1F
  39. MR14=0x1F
  40. MR15=0x1F
  41. MR16=0x1F
  42. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
  43. 256B stride
  44. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  45. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  46. pmugrf_os_reg[2] = 0x3280D280, stride = 0x9
  47. OUT
  48. Boot1: 2017-06-09, version: 1.09
  49. CPUId = 0x0
  50. ChipType = 0x10, 1830
  51. SdmmcInit=2 0
  52. BootCapSize=100000
  53. UserCapSize=14592MB
  54. FwPartOffset=2000 , 100000
  55. SdmmcInit=0 0
  56. BootCapSize=0
  57. UserCapSize=15193MB
  58. FwPartOffset=2000 , 0
  59. StorageInit ok = 194917
  60. LoadTrustBL
  61. No find bl30.bin
  62. Load uboot, ReadLba = 2000
  63. hdr 0x0:0xd0,0x0d,0xfe,0xed,0x00,0x00,0x05,0x6b,0x00,0x00,0x00,0x38,0x00,0x00,0x04,0xe8,
  64.  
  65. Load uboot, ReadLba = 2400
  66. hdr 0x0:0x00,0x00,0x00,0x00,0x4c,0xed,0x21,0x00,0x00,0x00,0x00,0x00,0x70,0xe2,0x21,0x00,
  67.  
  68. Load uboot, ReadLba = 2800
  69. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  70.  
  71. Load uboot, ReadLba = 2c00
  72. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  73.  
  74. Load uboot, ReadLba = 3000
  75. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  76.  
  77. Load uboot, ReadLba = 3400
  78. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  79.  
  80. Load uboot, ReadLba = 3800
  81. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  82.  
  83. Load uboot, ReadLba = 3c00
  84. hdr 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  85.  
  86. LoadTrustBL
  87. No find bl30.bin
  88. Load uboot, ReadLba = 2000
  89. Load OK, addr=0x200000, size=0x79874
  90. RunBL31 0x10000
  91. NOTICE: BL31: v1.3(debug):9f93abc
  92. NOTICE: BL31: Built : 10:18:20, Jul 27 2017
  93. NOTICE: BL31: Rockchip release version: v1.1
  94. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  95. INFO: plat_rockchip_pmu_init(1089): pd status 3e
  96. INFO: BL31: Initializing runtime services
  97. INFO: BL31: Initializing BL32
  98. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-106-g2d5da6a #1 Fri Oct 20 01:35:40 UTC 2017 aarch64)
  99.  
  100. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.1
  101.  
  102. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  103. INFO: BL31: Preparing for EL3 exit to normal world
  104. INFO: Entry point address = 0x200000
  105. INFO: SPSR = 0x3c9
  106.  
  107.  
  108. U-Boot 2014.10-RK3399-06-02588-gfa81fe4-dirty (May 22 2018 - 11:16:21)
  109.  
  110. CPU: rk3399
  111. cpu version = 0
  112. CPU's clock information:
  113. aplll = 816000000HZ
  114. apllb = 24000000HZ
  115. gpll = 800000000HZ
  116. aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
  117. aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
  118. hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
  119. cpll = 800000000HZ
  120. dpll = 800000000HZ
  121. vpll = 24000000HZ
  122. npll = 24000000HZ
  123. ppll = 676000000HZ
  124. Board: Rockchip platform Board
  125. Uboot as second level loader
  126. DRAM: Found dram banks: 1
  127. Adding bank:0000000000200000(000000007fe00000)
  128. Reserve memory for trust os.
  129. dram reserve bank: base = 0x08400000, size = 0x01200000
  130. 128 MiB
  131. SdmmcInit = 0 0
  132. SDCard Update.
  133. storage init OK!
  134. Using default environment
  135.  
  136. GetParam
  137. W: Invalid Parameter's tag (0x00000000)!
  138. Invalid parameter
  139. remotectl v0.1
  140. pwm freq=0xb8320
  141. pwm_freq_nstime=0x52d
  142. No pmic detect.
  143. CPU's clock information:
  144. aplll = 816000000HZ
  145. apllb = 24000000HZ
  146. gpll = 800000000HZ
  147. aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
  148. aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
  149. hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
  150. cpll = 800000000HZ
  151. dpll = 800000000HZ
  152. vpll = 24000000HZ
  153. npll = 24000000HZ
  154. ppll = 676000000HZ
  155. SecureBootEn = 0, SecureBootLock = 0
  156.  
  157. #Boot ver: 0000-00-00#0.00
  158. empty serial no.
  159. normal boot.
  160. no fuel gauge found
  161. no fuel gauge found
  162. read logo on state from dts [0]
  163. no fuel gauge found
  164. 'recovery' does not seem to be a partition nor an address
  165. Unable to boot:recovery
  166. try to start backup
  167. 'backup' does not seem to be a partition nor an address
  168. Unable to boot:backup
  169. try to start rockusb
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×