Advertisement
Guest User

Untitled

a guest
Sep 17th, 2017
331
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.98 KB | None | 0 0
  1. Marvell>> boot
  2.  
  3. NAND read: device 0 offset 0x900000, size 0x300000
  4. 3145728 bytes read: OK
  5. ## Booting kernel from Legacy Image at 02000000 ...
  6. Image Name: ARM OpenWrt Linux-4.4.14
  7. Created: 2017-07-16 11:27:54 UTC
  8. Image Type: ARM Linux Kernel Image (uncompressed)
  9. Data Size: 2064312 Bytes = 2 MiB
  10. Load Address: 00008000
  11. Entry Point: 00008000
  12. Verifying Checksum ... OK
  13. Loading Kernel Image ... OK
  14. OK
  15.  
  16. Starting kernel ...
  17.  
  18. [ 0.000000] Booting Linux on physical CPU 0x0
  19. [ 0.000000] Linux version 4.4.14 (inteliboy@ubuntu) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50108) ) #1 SMP Sun Sep 17 18:41:19 UTC 2017
  20. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
  21. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  22. [ 0.000000] Machine model: Linksys WRT3200ACM
  23. [ 0.000000] Memory policy: Data cache writealloc
  24. [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  26. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2m(uboot)ro,128k(u_env),256k(s_env),256k@8064k(devinfo),1920k(sysdiag),123m@9m(kernel1),120m@12m(rootfs1),123m(kernel2),120m@135m(rootfs2)
  27. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  30. [ 0.000000] Memory: 513256K/524288K available (4063K kernel code, 171K rwdata, 1524K rodata, 256K init, 295K bss, 11032K reserved, 0K cma-reserved, 0K highmem)
  31. [ 0.000000] Virtual kernel memory layout:
  32. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  33. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  34. [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  35. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  36. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  37. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  38. [ 0.000000] .text : 0xc0008000 - 0xc057d068 (5589 kB)
  39. [ 0.000000] .init : 0xc057e000 - 0xc05be000 ( 256 kB)
  40. [ 0.000000] .data : 0xc05be000 - 0xc05e8e34 ( 172 kB)
  41. [ 0.000000] .bss : 0xc05e8e34 - 0xc0632a6c ( 296 kB)
  42. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  43. [ 0.000000] Hierarchical RCU implementation.
  44. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  45. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  46. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  47. [ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
  48. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  49. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  50. [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
  51. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  52. [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
  53. [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
  54. [ 0.000000] Selected CPU frequency (16) unsupported
  55. [ 0.000000] Switching to timer-based delay loop, resolution 40ns
  56. [ 0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  57. [ 0.000007] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  58. [ 0.000098] Calibrating local timer... 933.12MHz.
  59. [ 0.060025] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  60. [ 0.060029] pid_max: default: 32768 minimum: 301
  61. [ 0.060062] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.060065] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.060226] CPU: Testing write buffer coherency: ok
  64. [ 0.060314] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  65. [ 0.060334] Setting up static identity map for 0x8280 - 0x82d8
  66. [ 0.060399] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
  67. [ 0.060464] mvebu-pmsu: Initializing Power Management Service Unit
  68. [ 0.060804] Booting CPU 1
  69. [ 0.060954] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  70. [ 0.060978] Brought up 2 CPUs
  71. [ 0.060982] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  72. [ 0.060985] CPU: All CPU(s) started in SVC mode.
  73. [ 0.062435] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  74. [ 0.062503] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  75. [ 0.062534] pinctrl core: initialized pinctrl subsystem
  76. [ 0.062806] NET: Registered protocol family 16
  77. [ 0.063231] DMA: preallocated 256 KiB pool for atomic coherent allocations
  78. [ 0.090033] cpuidle: using governor ladder
  79. [ 0.092207] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
  80. [ 0.092214] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
  81. [ 0.110395] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
  82. [ 0.110544] SCSI subsystem initialized
  83. [ 0.110709] usbcore: registered new interface driver usbfs
  84. [ 0.110733] usbcore: registered new interface driver hub
  85. [ 0.110756] usbcore: registered new device driver usb
  86. [ 0.111225] clocksource: Switched to clocksource armada_370_xp_clocksource
  87. [ 0.111581] NET: Registered protocol family 2
  88. [ 0.111767] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  89. [ 0.111788] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  90. [ 0.111816] TCP: Hash tables configured (established 4096 bind 4096)
  91. [ 0.111837] UDP hash table entries: 256 (order: 1, 8192 bytes)
  92. [ 0.111847] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  93. [ 0.111907] NET: Registered protocol family 1
  94. [ 0.112261] futex hash table entries: 512 (order: 3, 32768 bytes)
  95. [ 0.114395] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  96. [ 0.114404] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  97. [ 0.114993] io scheduler noop registered
  98. [ 0.115000] io scheduler deadline registered (default)
  99. [ 0.115336] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  100. [ 0.115606] irq: Cannot allocate irq_descs @ IRQ45, assuming pre-allocated
  101. [ 0.115728] irq: Cannot allocate irq_descs @ IRQ77, assuming pre-allocated
  102. [ 0.115987] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
  103. [ 0.115995] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  104. [ 0.115999] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  105. [ 0.116003] pci_bus 0000:00: root bus resource [bus 00-ff]
  106. [ 0.116168] PCI: bus0: Fast back to back transfers disabled
  107. [ 0.116173] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  108. [ 0.116179] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  109. [ 0.116377] PCI: bus1: Fast back to back transfers disabled
  110. [ 0.116614] PCI: bus2: Fast back to back transfers disabled
  111. [ 0.116663] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
  112. [ 0.116668] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
  113. [ 0.116674] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
  114. [ 0.116683] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
  115. [ 0.116691] pci 0000:00:01.0: PCI bridge to [bus 01]
  116. [ 0.116696] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
  117. [ 0.116702] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
  118. [ 0.116711] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
  119. [ 0.116720] pci 0000:00:02.0: PCI bridge to [bus 02]
  120. [ 0.116724] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
  121. [ 0.116811] mv_xor f1060800.xor: Marvell shared XOR driver
  122. [ 0.151612] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  123. [ 0.151695] mv_xor f1060900.xor: Marvell shared XOR driver
  124. [ 0.191587] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  125. [ 0.191724] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  126. [ 0.191963] console [ttyS0] disabled
  127. [ 0.212023] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
  128. [ 0.930390] console [ttyS0] enabled
  129. [ 0.934193] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  130. [ 0.943288] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  131. [ 0.952607] scsi host0: ahci-mvebu
  132. [ 0.956155] scsi host1: ahci-mvebu
  133. [ 0.959645] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
  134. [ 0.967606] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
  135. [ 0.975906] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
  136. [ 0.983714] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
  137. [ 0.990094] nand: AMD/Spansion S34ML02G2
  138. [ 0.994037] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  139. [ 1.001732] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
  140. [ 1.008908] Bad block table found at page 131008, version 0x01
  141. [ 1.015106] Bad block table found at page 130944, version 0x01
  142. [ 1.021226] 10 ofpart partitions found on MTD device pxa3xx_nand-0
  143. [ 1.027431] Creating 10 MTD partitions on "pxa3xx_nand-0":
  144. [ 1.032944] 0x000000000000-0x000000200000 : "u-boot"
  145. [ 1.038188] 0x000000200000-0x000000220000 : "u_env"
  146. [ 1.043345] 0x000000220000-0x000000260000 : "s_env"
  147. [ 1.048460] 0x0000007e0000-0x000000820000 : "devinfo"
  148. [ 1.053767] 0x000000820000-0x000000a00000 : "sysdiag"
  149. [ 1.059068] 0x000000900000-0x000008400000 : "kernel1"
  150. [ 1.064439] 0x000000c00000-0x000008400000 : "ubi"
  151. [ 1.069427] 0x000008400000-0x00000ff00000 : "kernel2"
  152. [ 1.074774] 0x000008700000-0x00000ff00000 : "rootfs2"
  153. [ 1.080109] 0x000000260000-0x000000820000 : "unused_area"
  154. [ 1.086147] libphy: Fixed MDIO Bus: probed
  155. [ 1.090343] libphy: orion_mdio_bus: probed
  156. [ 1.094598] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
  157. [ 1.103358] mvneta f1034000.ethernet eth0: Using random mac address 06:10:70:a1:cb:2e
  158. [ 1.112279] mvneta f1070000.ethernet eth1: Using hardware mac address 60:38:e0:b8:db:28
  159. [ 1.120361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  160. [ 1.126927] ehci-pci: EHCI PCI platform driver
  161. [ 1.131427] ehci-platform: EHCI generic platform driver
  162. [ 1.136749] ehci-orion: EHCI orion driver
  163. [ 1.140837] orion-ehci f1058000.usb: EHCI Host Controller
  164. [ 1.146272] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
  165. [ 1.153926] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000
  166. [ 1.171225] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  167. [ 1.177366] hub 1-0:1.0: USB hub found
  168. [ 1.181139] hub 1-0:1.0: 1 port detected
  169. [ 1.185398] usbcore: registered new interface driver usb-storage
  170. [ 1.191561] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
  171. [ 1.199185] i2c /dev entries driver
  172. [ 1.214085] orion_wdt: Initial timeout 171 sec
  173. [ 1.221714] marvell-cesa f1090000.crypto: CESA device successfully registered
  174. [ 1.229314] NET: Registered protocol family 10
  175. [ 1.234175] NET: Registered protocol family 17
  176. [ 1.238651] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  177. [ 1.251321] 8021q: 802.1Q VLAN Support v1.8
  178. [ 1.255579] Registering SWP/SWPB emulation handler
  179. [ 1.261090] xhci-hcd f10f8000.usb3: xHCI Host Controller
  180. [ 1.266449] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
  181. [ 1.274063] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  182. [ 1.282648] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
  183. [ 1.288658] hub 2-0:1.0: USB hub found
  184. [ 1.292468] hub 2-0:1.0: 1 port detected
  185. [ 1.296480] xhci-hcd f10f8000.usb3: xHCI Host Controller
  186. [ 1.301829] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
  187. [ 1.309369] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  188. [ 1.317690] hub 3-0:1.0: USB hub found
  189. [ 1.321485] hub 3-0:1.0: 1 port detected
  190. [ 1.325733] UBI error: no valid UBI magic found inside mtd6
  191. [ 1.331283] armada38x-rtc f10a3800.rtc: setting system clock to 2097-08-17 18:05:42 UTC (4027601142)
  192. [ 1.341233] ata2: SATA link down (SStatus 0 SControl 300)
  193. [ 1.346673] ata1: SATA link down (SStatus 0 SControl 300)
  194. [ 1.352063] Waiting 1 sec before mounting root device...
  195. [ 2.361288] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
  196. [ 2.368800] Please append a correct "root=" boot option; here are the available partitions:
  197. [ 2.377195] 1f00 2048 mtdblock0 (driver?)
  198. [ 2.382280] 1f01 128 mtdblock1 (driver?)
  199. [ 2.387359] 1f02 256 mtdblock2 (driver?)
  200. [ 2.392442] 1f03 256 mtdblock3 (driver?)
  201. [ 2.397521] 1f04 1920 mtdblock4 (driver?)
  202. [ 2.402603] 1f05 125952 mtdblock5 (driver?)
  203. [ 2.407683] 1f06 122880 mtdblock6 (driver?)
  204. [ 2.412764] 1f07 125952 mtdblock7 (driver?)
  205. [ 2.417843] 1f08 122880 mtdblock8 (driver?)
  206. [ 2.422925] 1f09 5888 mtdblock9 (driver?)
  207. [ 2.428005] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  208. [ 2.436302] CPU0: stopping
  209. [ 2.439020] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.14 #1
  210. [ 2.444962] Hardware name: Marvell Armada 380/385 (Device Tree)
  211. [ 2.450915] [<c001fa20>] (unwind_backtrace) from [<c001c388>] (show_stack+0x10/0x14)
  212. [ 2.458694] [<c001c388>] (show_stack) from [<c01993ec>] (dump_stack+0x8c/0xa0)
  213. [ 2.465947] [<c01993ec>] (dump_stack) from [<c001e8b4>] (handle_IPI+0x108/0x1a0)
  214. [ 2.473374] [<c001e8b4>] (handle_IPI) from [<c0009508>] (gic_handle_irq+0x80/0x94)
  215. [ 2.480975] [<c0009508>] (gic_handle_irq) from [<c000a5f4>] (__irq_svc+0x54/0x70)
  216. [ 2.488487] Exception stack(0xc05bff48 to 0xc05bff90)
  217. [ 2.493558] ff40: 00000001 00000000 00000000 c000b3c0 c05be000 c05c0498
  218. [ 2.501768] ff60: c04cd668 00000000 c05b9224 c05bffa0 00000000 c05bc118 00000000 c05bff98
  219. [ 2.509977] ff80: c0019434 c0019438 60000013 ffffffff
  220. [ 2.515048] [<c000a5f4>] (__irq_svc) from [<c0019438>] (arch_cpu_idle+0x34/0x50)
  221. [ 2.522476] [<c0019438>] (arch_cpu_idle) from [<c005b284>] (cpu_startup_entry+0x148/0x210)
  222. [ 2.530777] [<c005b284>] (cpu_startup_entry) from [<c057ed50>] (start_kernel+0x458/0x464)
  223. [ 2.538988] [<c057ed50>] (start_kernel) from [<0000807c>] (0x807c)
  224. [ 2.545193] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement