API tools faq
paste
Guest User

Untitled

a guest
Sep 29th, 2025
12
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.96 KB | Software | 0 0
raw download clone embed print report
  1. *******************************************
  2. * WARNING 1.5A power supply detected *
  3. * Current too low, use a 3A power supply! *
  4. *******************************************
  5.  
  6. NAND: 0 MiB
  7. MMC: STM32 SDMMC2: 0, STM32 SDMMC2: 1
  8. In: serial
  9. Out: serial
  10. Err: serial
  11. Net: eth0: ethernet@5800a000
  12. Hit any key to stop autoboot: 0
  13. Boot over mmc0!
  14. switch to partitions #0, OK
  15. mmc0 is current device
  16. Scanning mmc 0:4...
  17. Found /boot/extlinux/extlinux.conf
  18. Retrieving file: /boot/extlinux/extlinux.conf
  19. 125 bytes read in 1 ms (122.1 KiB/s)
  20. 1: stm32mp15-buildroot
  21. Retrieving file: /boot/zImage
  22. 3948368 bytes read in 172 ms (21.9 MiB/s)
  23. append: root=/dev/mmcblk0p4 rootwait
  24. Retrieving file: /boot/stm32mp157c-dk2.dtb
  25. 69672 bytes read in 4 ms (16.6 MiB/s)
  26. ## Flattened Device Tree blob at c4000000
  27. Booting using the fdt blob at 0xc4000000
  28. Using Device Tree in place at c4000000, end c4014027
  29.  
  30. Starting kernel ...
  31.  
  32. [ 0.000000] Booting Linux on physical CPU 0x0
  33. [ 0.000000] Linux version 4.19.26 (pavel@pavel-HP) (gcc version 7.4.0 (Buildroot 2019.02.1-00104-g0dbb719bf0-dirty)) #1 SMP PREEMPT Mon Sep 29 01:05:38 CEST 2025
  34. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  35. [ 0.000000] CPU: div instructions available: patching division code
  36. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  37. [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  38. [ 0.000000] Memory policy: Data cache writealloc
  39. [ 0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
  40. [ 0.000000] OF: reserved mem: initialized node mcuram2@0x10000000, compatible id shared-dma-pool
  41. [ 0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
  42. [ 0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
  43. [ 0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
  44. [ 0.000000] OF: reserved mem: initialized node vdev0vring1@10042000, compatible id shared-dma-pool
  45. [ 0.000000] Reserved memory: created DMA memory pool at 0x10044000, size 0 MiB
  46. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@10044000, compatible id shared-dma-pool
  47. [ 0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
  48. [ 0.000000] OF: reserved mem: initialized node mcuram@0x30000000, compatible id shared-dma-pool
  49. [ 0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
  50. [ 0.000000] OF: reserved mem: initialized node retram@0x38000000, compatible id shared-dma-pool
  51. [ 0.000000] cma: Reserved 128 MiB at 0xd4000000
  52. [ 0.000000] psci: probing for conduit method from DT.
  53. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  54. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  55. [ 0.000000] psci: Trusted OS migration not required
  56. [ 0.000000] psci: SMC Calling Convention v1.0
  57. [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x400 with crng_init=0
  58. [ 0.000000] percpu: Embedded 15 pages/cpu @(ptrval) s30028 r8192 d23220 u61440
  59. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113792
  60. [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait
  61. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  62. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  63. [ 0.000000] Memory: 313432K/458752K available (6144K kernel code, 190K rwdata, 1412K rodata, 1024K init, 167K bss, 14248K reserved, 131072K cma-reserved, 0K highmem)
  64. [ 0.000000] Virtual kernel memory layout:
  65. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  66. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  67. [ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
  68. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  69. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  70. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  71. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (7136 kB)
  72. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
  73. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 191 kB)
  74. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 168 kB)
  75. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  76. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  77. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  78. [ 0.000000] Tasks RCU enabled.
  79. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  80. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  81. [ 0.000000] /soc/interrupt-controller@5000d000: bank0
  82. [ 0.000000] /soc/interrupt-controller@5000d000: bank1
  83. [ 0.000000] /soc/interrupt-controller@5000d000: bank2
  84. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  85. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  86. [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  87. [ 0.000026] Switching to timer-based delay loop, resolution 41ns
  88. [ 0.001110] Console: colour dummy device 80x30
  89. [ 0.002344] console [tty0] enabled
  90. [ 0.002392] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  91. [ 0.002443] pid_max: default: 32768 minimum: 301
  92. [ 0.002666] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  93. [ 0.002712] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  94. [ 0.003380] CPU: Testing write buffer coherency: ok
  95. [ 0.003819] CPU0: update cpu_capacity 1024
  96. [ 0.003858] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  97. [ 0.059764] Setting up static identity map for 0xc0100000 - 0xc0100060
  98. [ 0.079751] rcu: Hierarchical SRCU implementation.
  99. [ 0.119839] smp: Bringing up secondary CPUs ...
  100. [ 0.200108] CPU1: update cpu_capacity 1024
  101. [ 0.200119] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  102. [ 0.200266] smp: Brought up 1 node, 2 CPUs
  103. [ 0.200344] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  104. [ 0.200371] CPU: All CPU(s) started in SVC mode.
  105. [ 0.201353] devtmpfs: initialized
  106. [ 0.223172] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  107. [ 0.223624] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  108. [ 0.223689] futex hash table entries: 512 (order: 3, 32768 bytes)
  109. [ 0.229215] pinctrl core: initialized pinctrl subsystem
  110. [ 0.230478] NET: Registered protocol family 16
  111. [ 0.252330] DMA: preallocated 256 KiB pool for atomic coherent allocations
  112. [ 0.255805] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
  113. [ 0.255876] stm32-pm-domain pm_domain: subdomain core-power-domain registered
  114. [ 0.255911] stm32-pm-domain pm_domain: domains probed
  115. [ 0.268294] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
  116. [ 0.268621] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
  117. [ 0.268897] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
  118. [ 0.269166] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
  119. [ 0.269404] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOE bank added
  120. [ 0.269643] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOF bank added
  121. [ 0.269892] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOG bank added
  122. [ 0.270144] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOH bank added
  123. [ 0.270467] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOI bank added
  124. [ 0.270621] stm32mp157-pinctrl soc:pin-controller@50002000: Pinctrl STM32 initialized
  125. [ 0.271291] stm32mp157-pinctrl soc:pin-controller-z@54004000: GPIOZ bank added
  126. [ 0.271343] stm32mp157-pinctrl soc:pin-controller-z@54004000: Pinctrl STM32 initialized
  127. [ 0.282984] stm32-mdma 58000000.dma: STM32 MDMA driver registered
  128. [ 0.284525] usbcore: registered new interface driver usbfs
  129. [ 0.284622] usbcore: registered new interface driver hub
  130. [ 0.284774] usbcore: registered new device driver usb
  131. [ 0.285014] pps_core: LinuxPPS API ver. 1 registered
  132. [ 0.285044] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  133. [ 0.285102] PTP clock support registered
  134. [ 0.285408] Advanced Linux Sound Architecture Driver Initialized.
  135. [ 0.286455] clocksource: Switched to clocksource arch_sys_counter
  136. [ 0.296860] NET: Registered protocol family 2
  137. [ 0.297774] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  138. [ 0.297850] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  139. [ 0.297942] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  140. [ 0.298057] TCP: Hash tables configured (established 4096 bind 4096)
  141. [ 0.298213] UDP hash table entries: 256 (order: 1, 8192 bytes)
  142. [ 0.298280] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  143. [ 0.298507] NET: Registered protocol family 1
  144. [ 0.300169] workingset: timestamp_bits=30 max_order=17 bucket_order=0
  145. [ 0.309838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  146. [ 0.309897] io scheduler noop registered
  147. [ 0.309922] io scheduler deadline registered
  148. [ 0.310158] io scheduler cfq registered (default)
  149. [ 0.310191] io scheduler mq-deadline registered
  150. [ 0.310216] io scheduler kyber registered
  151. [ 0.310817] stm32-usbphyc 5a006000.usbphyc: Linked as a consumer to regulator.1
  152. [ 0.310892] stm32-usbphyc 5a006000.usbphyc: Linked as a consumer to regulator.2
  153. [ 0.310954] stm32-usbphyc 5a006000.usbphyc: Dropping the link to regulator.2
  154. [ 0.311027] stm32-usbphyc 5a006000.usbphyc: Dropping the link to regulator.1
  155. [ 0.313576] stm32-dma 48000000.dma: STM32 DMA driver registered
  156. [ 0.315097] stm32-dma 48001000.dma: STM32 DMA driver registered
  157. [ 0.379905] STM32 USART driver initialized
  158. [ 0.381031] 4000e000.serial: ttySTM3 at MMIO 0x4000e000 (irq = 25, base_baud = 4000000) is a stm32-usart
  159. [ 0.381332] serial serial0: tty port ttySTM3 registered
  160. [ 0.381406] stm32-usart 4000e000.serial: interrupt mode used for rx (no dma)
  161. [ 0.381442] stm32-usart 4000e000.serial: interrupt mode used for tx (no dma)
  162. [ 0.382513] 40010000.serial: ttySTM0 at MMIO 0x40010000 (irq = 27, base_baud = 4000000) is a stm32-usart
  163. [ 1.216629] console [ttySTM0] enabled
  164. [ 1.220795] stm32-usart 40010000.serial: interrupt mode used for rx (no dma)
  165. [ 1.227364] stm32-usart 40010000.serial: interrupt mode used for tx (no dma)
  166. [ 1.242031] stm32-display-dsi 5a000000.dsi: Linked as a consumer to regulator.2
  167. [ 1.250171] panel-orisetech-otm8009a 5a000000.dsi.0: 5a000000.dsi.0 supply power not found, using dummy regulator
  168. [ 1.257868] random: fast init done
  169. [ 1.259172] panel-orisetech-otm8009a 5a000000.dsi.0: Linked as a consumer to regulator.0
  170. [ 1.270324] random: crng init done
  171. [ 1.282323] brd: module loaded
  172. [ 1.291274] loop: module loaded
  173. [ 1.294797] libphy: Fixed MDIO Bus: probed
  174. [ 1.297566] CAN device driver interface
  175. [ 1.302613] stm32-dwmac 5800a000.ethernet: PTP uses main clock
  176. [ 1.307222] stm32-dwmac 5800a000.ethernet: no reset control found
  177. [ 1.313247] stm32-dwmac 5800a000.ethernet: No phy clock provided...
  178. [ 1.330317] stm32-dwmac 5800a000.ethernet: User ID: 0x40, Synopsys ID: 0x42
  179. [ 1.335859] stm32-dwmac 5800a000.ethernet: DWMAC4/5
  180. [ 1.340875] stm32-dwmac 5800a000.ethernet: DMA HW capability register supported
  181. [ 1.348157] stm32-dwmac 5800a000.ethernet: RX Checksum Offload Engine supported
  182. [ 1.355438] stm32-dwmac 5800a000.ethernet: TX Checksum insertion supported
  183. [ 1.362329] stm32-dwmac 5800a000.ethernet: Wake-Up On Lan supported
  184. [ 1.368595] stm32-dwmac 5800a000.ethernet: TSO supported
  185. [ 1.373889] stm32-dwmac 5800a000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  186. [ 1.381751] stm32-dwmac 5800a000.ethernet: TSO feature enabled
  187. [ 1.387777] libphy: stmmac: probed
  188. [ 1.394122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  189. [ 1.399266] ehci-platform: EHCI generic platform driver
  190. [ 1.404911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  191. [ 1.410663] ohci-platform: OHCI generic platform driver
  192. [ 1.419376] stm32_rtc 5c004000.rtc: rtc core: registered 5c004000.rtc as rtc0
  193. [ 1.425430] stm32_rtc 5c004000.rtc: Date/Time must be initialized
  194. [ 1.431298] stm32_rtc 5c004000.rtc: registered rev:1.2
  195. [ 1.436487] i2c /dev entries driver
  196. [ 1.458983] stm32f7-i2c 40012000.i2c: can't use DMA
  197. [ 1.465376] sii902x 0-0039: Failed to get supply 'iovcc': -517
  198. [ 1.476181] input: generic ft5x06 (11) as /devices/platform/soc/40012000.i2c/i2c-0/0-0038/input/input1
  199. [ 1.484542] stm32f7-i2c 40012000.i2c: STM32F7 I2C-0 bus adapter
  200. [ 1.509283] stm32f7-i2c 5c002000.i2c: can't use DMA
  201. [ 1.514674] typec_stusb 1-0028: STUSB driver registered
  202. [ 1.520031] stpmic1 1-0033: PMIC Chip Version: 0x21
  203. [ 1.528692] BUCK1: supplied by regulator-dummy
  204. [ 1.535400] BUCK2: supplied by regulator-dummy
  205. [ 1.541731] BUCK3: supplied by regulator-dummy
  206. [ 1.548392] BUCK4: supplied by regulator-dummy
  207. [ 1.554703] LDO1: supplied by v3v3
  208. [ 1.562012] LDO2: supplied by regulator-dummy
  209. [ 1.568552] LDO3: supplied by vdd_ddr
  210. [ 1.574476] LDO4: supplied by regulator-dummy
  211. [ 1.578775] LDO5: supplied by regulator-dummy
  212. [ 1.585396] LDO6: supplied by v3v3
  213. [ 1.591014] VREF_DDR: supplied by regulator-dummy
  214. [ 1.597259] BOOST: supplied by regulator-dummy
  215. [ 1.601175] VBUS_OTG: supplied by bst_out
  216. [ 1.605196] SW_OUT: supplied by bst_out
  217. [ 1.611926] input: pmic_onkey as /devices/platform/soc/5c002000.i2c/i2c-1/1-0033/5c002000.i2c:stpmic@33:onkey/input/input2
  218. [ 1.622039] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-1 bus adapter
  219. [ 1.630937] mmci-pl18x 58005000.sdmmc: Linked as a consumer to regulator.8
  220. [ 1.636599] mmci-pl18x 58005000.sdmmc: mmc0: PL180 manf 53 rev2 at 0x58005000 irq 58,0 (pio)
  221. [ 1.673487] mmci-pl18x 58007000.sdmmc: allocated mmc-pwrseq
  222. [ 1.677927] mmci-pl18x 58007000.sdmmc: Linked as a consumer to regulator.8
  223. [ 1.685704] mmci-pl18x 58007000.sdmmc: mmc1: PL180 manf 53 rev1 at 0x58007000 irq 59,0 (pio)
  224. [ 1.719600] sdhci: Secure Digital Host Controller Interface driver
  225. [ 1.724425] sdhci: Copyright(c) Pierre Ossman
  226. [ 1.728762] mmc0: host does not support reading read-only switch, assuming write-enable
  227. [ 1.736762] Synopsys Designware Multimedia Card Interface Driver
  228. [ 1.743022] sdhci-pltfm: SDHCI platform and OF driver helper
  229. [ 1.746864] mmc0: new high speed SDHC card at address aaaa
  230. [ 1.749697] usbcore: registered new interface driver usbhid
  231. [ 1.759493] usbhid: USB HID core driver
  232. [ 1.761268] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  233. [ 1.770361] mmcblk0: mmc0:aaaa SS16G 14.8 GiB
  234. [ 1.770446] stm32-ipcc 4c001000.mailbox: ipcc rev:1.0 enabled, 6 chans, proc 0
  235. [ 1.775651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  236. [ 1.781683] stm32-rproc m4@0: wdg irq registered
  237. [ 1.787543] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  238. [ 1.790943] remoteproc remoteproc0: m4 is available
  239. [ 1.798889] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  240. [ 1.801741] vref: supplied by vdd
  241. [ 1.808355] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  242. [ 1.809932] stm32-adc-core 48003000.adc: Linked as a consumer to regulator.4
  243. [ 1.817994] GPT:Primary header thinks Alt. header is not at the end of the disk.
  244. [ 1.822470] stm32-adc-core 48003000.adc: Linked as a consumer to regulator.7
  245. [ 1.829840] GPT:526297 != 31116287
  246. [ 1.840244] mmc1: queuing unknown CIS tuple 0x80 (6 bytes)
  247. [ 1.845722] GPT:Alternate GPT header not at the end of the disk.
  248. [ 1.851802] GPT:526297 != 31116287
  249. [ 1.855129] GPT: Use GNU Parted to correct GPT errors.
  250. [ 1.860353] mmcblk0: p1 p2 p3 p4
  251. [ 1.882324] iio iio:device2: Can't get offset/scale: -517
  252. [ 1.889772] NET: Registered protocol family 10
  253. [ 1.894266] Segment Routing with IPv6
  254. [ 1.896637] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  255. [ 1.903226] NET: Registered protocol family 17
  256. [ 1.906944] can: controller area network core (rev 20170425 abi 9)
  257. [ 1.913130] NET: Registered protocol family 29
  258. [ 1.917503] can: raw protocol (rev 20170425)
  259. [ 1.921724] can: broadcast manager protocol (rev 20170425 t)
  260. [ 1.927431] can: netlink gateway (rev 20170425) max_hops=1
  261. [ 1.933141] ThumbEE CPU extension supported.
  262. [ 1.937185] Registering SWP/SWPB emulation handler
  263. [ 1.942950] stm32-usbphyc 5a006000.usbphyc: Linked as a consumer to regulator.1
  264. [ 1.943824] mmc1: new high speed SDIO card at address 0001
  265. [ 1.949363] stm32-usbphyc 5a006000.usbphyc: Linked as a consumer to regulator.2
  266. [ 1.962109] stm32-usbphyc 5a006000.usbphyc: Linked as a consumer to regulator.12
  267. [ 1.970037] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
  268. [ 1.976372] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_d not found, using dummy regulator
  269. [ 1.984387] dwc2 49000000.usb-otg: Linked as a consumer to regulator.0
  270. [ 1.990826] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_a not found, using dummy regulator
  271. [ 1.999946] dwc2 49000000.usb-otg: Configuration mismatch. dr_mode forced to host
  272. [ 2.013436] dwc2 49000000.usb-otg: Linked as a consumer to regulator.3
  273. [ 2.019133] dwc2 49000000.usb-otg: DWC OTG Controller
  274. [ 2.023610] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
  275. [ 2.031087] dwc2 49000000.usb-otg: irq 52, io mem 0x49000000
  276. [ 2.037760] hub 1-0:1.0: USB hub found
  277. [ 2.040422] hub 1-0:1.0: 1 port detected
  278. [ 2.045160] ehci-platform 5800d000.usbh-ehci: EHCI Host Controller
  279. [ 2.050560] ehci-platform 5800d000.usbh-ehci: new USB bus registered, assigned bus number 2
  280. [ 2.059230] ehci-platform 5800d000.usbh-ehci: irq 63, io mem 0x5800d000
  281. [ 2.086500] ehci-platform 5800d000.usbh-ehci: USB 2.0 started, EHCI 1.00
  282. [ 2.092724] hub 2-0:1.0: USB hub found
  283. [ 2.095550] hub 2-0:1.0: 2 ports detected
  284. [ 2.101997] sii902x 0-0039: Linked as a consumer to regulator.10
  285. [ 2.106663] sii902x 0-0039: Linked as a consumer to regulator.14
  286. [ 2.116525] i2c i2c-0: Added multiplexed i2c bus 2
  287. [ 2.122006] [drm] ltdc hw version 0x00010300 - ready
  288. [ 2.125630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  289. [ 2.132192] [drm] Driver supports precise vblank timestamp query.
  290. [ 2.138819] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
  291. [ 2.146771] dwc2 49000000.usb-otg: Overcurrent change detected
  292. [ 2.152780] dwc2 49000000.usb-otg: Overcurrent change detected
  293. [ 2.536472] usb 2-1: new high-speed USB device number 2 using ehci-platform
  294. [ 2.630301] Console: switching to colour frame buffer device 60x50
  295. [ 2.662119] stm32-display 5a001000.display-controller: fb0: DRM emulated frame buffer device
  296. [ 2.671114] stm32_rtc 5c004000.rtc: setting system clock to 2000-01-01 00:00:08 UTC (946684808)
  297. [ 2.680195] vdda: disabling
  298. [ 2.682368] ALSA device list:
  299. [ 2.684929] No soundcards fo�[ 2.700044] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  300. [ 2.707124] VFS: Mounted root (ext4 filesystem) readonly on device 179:4.
  301. [ 2.717374] devtmpfs: mounted
  302. [ 2.720651] Freeing unused kernel memory: 1024K
  303. [ 2.724020] Run /sbin/init as init process
  304. [ 2.737834] hub 2-1:1.0: USB hub found
  305. [ 2.740392] hub 2-1:1.0: 4 ports detected
  306. mount: you must be root
  307. mount: you must be root
  308. mkdir: can't create directory '/dev/pts': Permission denied
  309. mkdir: can't create directory '/dev/shm': Permission denied
  310. mount: you must be root
  311. hostname: sethostname: Operation not permitted
  312. Starting syslogd: OK
  313. Starting klogd: OK
  314. read-only file system detected...done
  315. mkdir: can't create directory '/run/network': Read-only file system
  316. Starting network: ip: RTNETLINK answers: Operation not permitted
  317. ip: SIOCSIFFLAGS: Operation not permitted
  318. ifup: can't open '/var/run/ifstate.new': Read-only file system
  319. FAIL
  320. can't open /dev/console: Permission denied
  321. can't open /dev/console: Permission denied
  322. can't open /dev/console: Permission denied
  323. can't open /dev/console: Permission denied
  324. can't open /dev/console: Permission denied
  325. can't open /dev/console: Permission denied
  326. can't open /dev/console: Permission denied
  327. can't open /dev/console: Permission denied
  328. can't open /dev/console: Permission denied
  329. can't open /dev/console: Permission denied
  330. can't open /dev/console: Permission denied
  331. can't open /dev/console: Permission denied
  332. can't open /dev/console: Permission denied
  333. can't open /dev/console: Permission denied
  334. can't open /dev/console: Permission denied
  335. can't open /dev/console: Permission denied
  336. can't open /dev/console: Permission denied
  337. can't open /dev/console: Permission denied
  338. can't open /dev/console: Permission denied
  339.  
Tags: stm32mp1
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!