SHARE
TWEET

AllWinner OptimusBoard Boot Log

a guest Jul 31st, 2014 1,530 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.07.29 21:12:45 =~=~=~=~=~=~=~=~=~=~=~=
  2. \00\00\00\00\00HELLO! BOOT0 is starting!
  3. boot0 version : 3.1.0
  4. rtc 1 value 0x00010000
  5. rtc 2 value 0x00020000
  6. rtc 3 value 0x00030000
  7. INFO: dram code V1.9
  8. dram clk=672
  9. dram_zq = 0x0x003f3fdd!!
  10. DDR3 used!!
  11. dram channle 2
  12. 0x0x00100001
  13. 0x0x00100001
  14. pmu id=0x00000062
  15. VTC Disabled!!
  16. Channel 0 OK!
  17. VTC Disabled!!
  18. Channel 1 OK!
  19. dram size =2048
  20. card boot number = 2
  21. card no is 2
  22. sdcard 2 line count 0
  23. [mmc]: mmc driver ver 2014-04-3 16:20
  24. [mmc]: ***Try SD card 2***
  25. [mmc]: mmc 2 cmd 8 timeout, err 0x00000100
  26. [mmc]: mmc 2 cmd 8 err 0x00000100
  27. [mmc]: mmc 2 send if cond failed
  28. [mmc]: mmc 2 cmd 55 timeout, err 0x00000100
  29. [mmc]: mmc 2 cmd 55 err 0x00000100
  30. [mmc]: mmc 2 send app cmd failed
  31. [mmc]: ***Try MMC card 2***
  32. [mmc]: MMC ver 5.0
  33. [mmc]: SD/MMC Card: 4bit, capacity: 14910MB
  34. [mmc]: vendor: Man 0x00150100 Snr 0x01e2d262
  35. [mmc]: product: AWMB3
  36. [mmc]: revision: 5.2
  37. [mmc]: ***SD/MMC 2 init OK!!!***
  38. sdcard 2 init ok
  39. The size of uboot is 0x000c0000.
  40. sum=0xc61016d0
  41. src_sum=0xc61016d0
  42. Succeed in loading uboot from sdmmc flash.
  43. Ready to disable icache.
  44. Jump to secend Boot.
  45. [      0.671]
  46.  
  47. U-Boot 2011.09-rc1-00001-ga70098a (Jun 09 2014 - 09:12:58) Allwinner Technology
  48.  
  49. [      0.680]version: 1.1.0
  50. [      0.683]pmbus:   ready
  51. [      0.685]PMU: AXP809
  52. [      0.687]PMU: AXP809 found
  53. [      0.690]PMU: AXP806
  54. [      0.692]PMU: AXP806 found
  55. [      0.695]PMU: bat ratio = 100
  56. try to set dcdc3 to 900 mV
  57. [      0.701]PMU: dcdc3 900
  58. [      0.703]PMU: pll1 1008 Mhz
  59. set power on vol to default
  60. dcdc1_vol = 3000, onoff=1
  61. dcdc2_vol = 900, onoff=0
  62. dcdc3_vol = 900, onoff=1
  63. dcdc4_vol = 900, onoff=1
  64. dcdc5_vol = 1500, onoff=1
  65. dc5ldo_vol = 900, onoff=1
  66. dldo2_vol = 3000, onoff=1
  67. eldo3_vol = 1800, onoff=1
  68. aldo1_vol = 3000, onoff=1
  69. aldo3_vol = 3000, onoff=1
  70. find power_sply to end
  71. slave power
  72. dcdca_vol = 900, onoff=1
  73. dcdcb_vol = 0, onoff=0
  74. dcdcc_vol = 0, onoff=0
  75. dcdcd_vol = 900, onoff=1
  76. dcdce_vol = 2100, onoff=1
  77. aldo1_vol = 3000, onoff=1
  78. bldo1_vol = 1800, onoff=1
  79. bldo2_vol = 1800, onoff=1
  80. cldo1_vol = 0, onoff=0
  81. find slave power sply to end
  82. supply=gpio1
  83. axp=axp809, supply=gpio1, vol=2500
  84. reg addr=0x6000b00, value=0x6, pmu_vol=2500
  85. supply=aldo2
  86. axp=axp809, supply=aldo2, vol=1800
  87. reg addr=0x6000b04, value=0x0, pmu_vol=1800
  88. supply=dcdc1
  89. axp=axp809, supply=dcdc1, vol=3000
  90. reg addr=0x6000b08, value=0xa, pmu_vol=3000
  91. supply=bldo1
  92. axp=axp806, supply=bldo1, vol=1800
  93. reg addr=0x6000b0c, value=0x0, pmu_vol=1800
  94. supply=eldo2
  95. axp=axp809, supply=eldo2, vol=1800
  96. reg addr=0x6000b10, value=0x0, pmu_vol=1800
  97. supply=dcdc1
  98. axp=axp809, supply=dcdc1, vol=3000
  99. reg addr=0x6000b14, value=0xa, pmu_vol=3000
  100. supply=gpio0
  101. axp=axp809, supply=gpio0, vol=3000
  102. reg addr=0x6000b18, value=0xa, pmu_vol=3000
  103. supply=dcdc1
  104. axp=axp809, supply=dcdc1, vol=3000
  105. reg addr=0x6000b1c, value=0xa, pmu_vol=3000
  106. supply=dldo2
  107. axp=axp809, supply=dldo2, vol=3000
  108. reg addr=0x8002f00, value=0xa, pmu_vol=3000
  109. supply=eldo3
  110. axp=axp809, supply=eldo3, vol=3000
  111. reg addr=0x8002f04, value=0xa, pmu_vol=3000
  112. config gpio bias voltage finish
  113. no battery, limit to dc
  114. fel key old mode
  115. run key detect
  116. no key found
  117. no key input
  118. dram_para_set start
  119. dram_para_set end
  120. [      0.866]DRAM:  2 GiB
  121. relocation Offset is: 75b0b000
  122. deu_mode1 not exist.
  123. get clock handle by id 36 fail!
  124. get clock handle by id 36 fail!
  125. lcd0.lcd_pwm_freq is ZERO
  126. lcd1.lcd_pwm_freq is ZERO
  127. lcd 2 is not register
  128. screen 0 do not support HDMI TYPE!
  129. screen 2 do not support HDMI TYPE!
  130. smcl's set manager is NULL
  131. smbl's set manager is NULL
  132. screen_id 0 do not support HDMI TYPE!
  133. get hdmi0 failed!
  134. [      1.110]boot_disp.output_disp=1
  135. [      1.114]boot_disp.output_type=3
  136. [      1.117]boot_disp.output_mode=10
  137. [      1.120]boot_disp.auto_hpd=1
  138. hdmi open
  139. Hdmi_open
  140. Hdmi_hal_video_enable_sync
  141. workmode = 0
  142. MMC:     2
  143. [      1.235][mmc]: mmc driver ver 2014-5-26 14:21:30
  144. [      1.240][mmc]: get sdc_odly_25M fail,use default dly 0
  145. [      1.245][mmc]: get sdc_sdly_25M fail,use default dly 5
  146. [      1.251][mmc]: get sdc_odly_50M fail,use default dly 5
  147. [      1.256][mmc]: get sdc_sdly_50M fail,use default dly 4
  148. [      1.261][mmc]: get sdc_f_max fail,use default sdc_f_max 48000000
  149. [      1.267][mmc]: PC Bias: 0x06000b08 0x0000000a
  150. [      1.272][mmc]: SUNXI SD/MMC: 2
  151. [      1.285][mmc]: ************Try SD card 2************
  152. [      1.290][mmc]: mmc 2 cmd 8 timeout, err 100
  153. [      1.297][mmc]: mmc 2 mmc cmd 8 err 0x00000100
  154. [      1.301][mmc]: mmc send if cond failed
  155. [      1.305][mmc]: mmc 2 cmd 55 timeout, err 100
  156. [      1.311][mmc]: mmc 2 mmc cmd 55 err 0x00000100
  157. [      1.315][mmc]: send app cmd failed
  158. [      1.318][mmc]: ************Try MMC card 2************
  159. [      1.367][mmc]: MID 000015 PSN e2d2626e
  160. [      1.370][mmc]: PNM AWMB3R -- 0x41-57-4d-42-33-52
  161. [      1.375][mmc]: PRV 0.1
  162. [      1.378][mmc]: MDT m-4 y-2014
  163. [      1.381][mmc]: MMC ver 5.0
  164. [      1.384][mmc]: ---------------mmc->clock 48000000-----------
  165. [      1.389][mmc]: ---------------mmc->bus_width 4--------------
  166. [      1.395][mmc]: SD/MMC Card: 4bit, capacity: 14910MB
  167. [      1.400][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
  168. [      1.406][mmc]: ************SD/MMC 2 init OK!!!************
  169. [      1.412]sunxi flash init ok
  170. In:    serial
  171. Out:   serial
  172. Err:   serial
  173. --------fastboot partitions--------
  174. -total partitions:10-
  175. -name-        -start-       -size-      
  176. bootloader  : 1000000       1000000    
  177. env         : 2000000       1000000    
  178. boot        : 3000000       1000000    
  179. system      : 4000000       30000000    
  180. misc        : 34000000      1000000    
  181. recovery    : 35000000      2000000    
  182. cache       : 37000000      28000000    
  183. metadata    : 5f000000      1000000    
  184. private     : 60000000      1000000    
  185. UDISK       : 61000000      0          
  186. -----------------------------------
  187. base bootcmd=run setargs_nand boot_normal
  188. bootcmd set setargs_mmc
  189. key 0
  190. cant find rcvy value
  191. cant find fstbt value
  192. misc partition found
  193. misc_message->command = 0
  194. to be run cmd=run setargs_mmc boot_normal
  195. WORK_MODE_BOOT
  196. board_status_probe
  197. [      1.497]key trigger
  198. sunxi_bmp_logo_display
  199. screen_id =1, screen_width =1920, screen_height =1080
  200. [      1.577]Hit any key to stop autoboot:  1  0
  201. read boot or recovery all
  202. [      3.263]sunxi flash read :offset 3000000, 13788296 bytes OK
  203. no signature
  204. [      3.272]ready to boot
  205. [      3.274]
  206. Starting kernel ...
  207.  
  208. [sun9i_fixup]: From boot, get meminfo:
  209.  
  210.         Start:  0x20000000
  211.  
  212.         Size:   2048MB
  213.  
  214. [mcpm_smp_init_cpus] ncores=8
  215.  
  216. [    0.000000] Booting Linux on physical CPU 0
  217. [    0.000000] Initializing cgroup subsys cpu
  218. [    0.000000] Linux version 3.4.39 (hechuanlong@Exdroid23) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Mon Jun 23 17:04:36 CST 2014
  219. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  220. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  221. [    0.000000] Machine: sun9i
  222. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  223. [    0.000000] On node 0 totalpages: 524288
  224. [    0.000000] free_area_init_node: node 0, pgdat c09b56c0, node_mem_map c1276000
  225. [    0.000000]   Normal zone: 1404 pages used for memmap
  226. [    0.000000]   Normal zone: 0 pages reserved
  227. [    0.000000]   Normal zone: 158340 pages, LIFO batch:31
  228. [    0.000000]   HighMem zone: 3204 pages used for memmap
  229. [    0.000000]   HighMem zone: 361340 pages, LIFO batch:31
  230. [    0.000000] PERCPU: Embedded 8 pages/cpu @c2485000 s11072 r8192 d13504 u32768
  231. [    0.000000] pcpu-alloc: s11072 r8192 d13504 u32768 alloc=8*4096
  232. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  233. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519680
  234. [    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/block/mmcblk0p7 init=/init vmalloc=384M ion_reserve=812M loglevel=8 partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:misc@mmcblk0p8:recovery@mmcblk0p9:cache@mmcblk0p10:metadata@mmcblk0p11:private@mmcblk0p12:UDISK@mmcblk0p1 boot_type=2
  235. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  236. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  237. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  238. [    0.000000] Memory: 2048MB = 2048MB total
  239. [    0.000000] Memory: 1232016k/1232016k available, 865136k reserved, 626684K highmem
  240. [    0.000000] Virtual kernel memory layout:
  241. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  242. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  243. [    0.000000]     vmalloc : 0xe7800000 - 0xff000000   ( 376 MB)
  244. [    0.000000]     lowmem  : 0xc0000000 - 0xe7000000   ( 624 MB)
  245. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  246. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  247. [    0.000000]       .text : 0xc0008000 - 0xc08ec698   (9106 kB)
  248. [    0.000000]       .init : 0xc08ed000 - 0xc093cb40   ( 319 kB)
  249. [    0.000000]       .data : 0xc093e000 - 0xc09b7fb8   ( 488 kB)
  250. [    0.000000]        .bss : 0xc09b909c - 0xc0b380d8   (1533 kB)
  251. [    0.000000] Preemptible hierarchical RCU implementation.
  252. [    0.000000] NR_IRQS:544
  253. [    0.000000] try to syncboot of clk hdmi_slow
  254. [    0.000000] try to syncboot of clk trace
  255. [    0.000000] try to syncboot of clk ats
  256. [    0.000000] try to syncboot of clk uart0
  257. [    0.000000] try to syncboot of clk gt
  258. [    0.000000] try to syncboot of clk de
  259. [    0.000000] try to syncboot of clk hdmi
  260. [    0.000000] try to syncboot of clk lcd1
  261. [    0.000000] try to syncboot of clk sdr0
  262. [    0.000000] try to syncboot of clk sdmmc2
  263. [    0.000000] try to syncboot of clk cci400
  264. [    0.000000] try to syncboot of clk pio
  265. [    0.000000] try to syncboot of clk lradc
  266. [    0.000000] try to syncboot of clk twd
  267. [    0.000000] try to syncboot of clk ahb2
  268. [    0.000000] try to syncboot of clk dma
  269. [    0.000000] try to syncboot of clk sdram
  270. [    0.000000] try to syncboot of clk axi1
  271. [    0.000000] try to syncboot of clk axi0
  272. [    0.000000] Architected local timer running at 24.00MHz.
  273. [    0.000000] Switching to timer-based delay loop
  274. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  275. [    0.000000] Console: colour dummy device 80x30
  276. [    0.000239] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  277. [    0.000264] pid_max: default: 32768 minimum: 301
  278. [    0.000433] Security Framework initialized
  279. [    0.000455] SELinux:  Initializing.
  280. [    0.000504] SELinux:  Starting in permissive mode
  281. [    0.000589] Mount-cache hash table entries: 512
  282. [    0.001733] Initializing cgroup subsys debug
  283. [    0.001750] Initializing cgroup subsys cpuacct
  284. [    0.001761] Initializing cgroup subsys freezer
  285. [    0.001804] CPU: Testing write buffer coherency: ok
  286. [    0.001857] ftrace: allocating 23694 entries in 70 pages
  287. [    0.047138] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  288. [    0.047194] Setting up static identity map for 0x206257b8 - 0x20625810
  289. [    0.150300] CPU1: Booted secondary processor
  290. [    0.150374] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  291. [    0.190365] CPU2: Booted secondary processor
  292. [    0.190431] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  293. [    0.230519] CPU3: Booted secondary processor
  294. [    0.230584] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  295. [    0.267400] CPU4: failed to boot: -22
  296. [    0.307431] CPU5: failed to boot: -22
  297. [    0.347490] CPU6: failed to boot: -22
  298. [    0.387556] CPU7: failed to boot: -22
  299. [    0.387727] Brought up 4 CPUs
  300. [    0.387738] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  301. [    0.388637] devtmpfs: initialized
  302. [    0.395188] script_init enter!
  303. [    0.395931] script_init exit!
  304. [    0.395975] sched: registering cpufreq notifiers for scale-invariant loads
  305. [    0.397012] pinctrl core: initialized pinctrl subsystem
  306. [    0.397886] dummy:
  307. [    0.398363] NET: Registered protocol family 16
  308. [    0.398879] script_sysfs_init success
  309. [    0.399064] sunxi_dump_init success
  310. [    0.399488] sunxi pinctrl probe enter
  311. [    0.401028] gpiochip_add: registered GPIOs 0 to 447 on device: sunxi-pinctrl
  312. [    0.403034] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  313. [    0.403621] axp_pinctrl_probe enter...
  314. [    0.403803] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
  315. [    0.403823] mainkey total count : 93
  316. [    0.403833] mainkey name : product, pin count : 0
  317. [    0.403843] mainkey name : platform, pin count : 0
  318. [    0.403852] mainkey name : target, pin count : 0
  319. [    0.403862] mainkey name : charging_type, pin count : 0
  320. [    0.403872] mainkey name : key_detect_en, pin count : 0
  321. [    0.403882] mainkey name : power_sply, pin count : 0
  322. [    0.403892] mainkey name : slave_power_sply, pin count : 0
  323. [    0.403902] mainkey name : gpio_bias, pin count : 0
  324. [    0.403911] mainkey name : card_boot, pin count : 0
  325. [    0.403921] mainkey name : pm_para, pin count : 0
  326. [    0.403931] mainkey name : card0_boot_para, pin count : 6
  327. [    0.403944] mainkey name : card2_boot_para, pin count : 6
  328. [    0.403956] mainkey name : boot_disp, pin count : 0
  329. [    0.403966] mainkey name : twi_para, pin count : 2
  330. [    0.403976] mainkey name : uart_para, pin count : 2
  331. [    0.403986] mainkey name : jtag_para, pin count : 4
  332. [    0.403997] mainkey name : clock, pin count : 0
  333. [    0.404007] mainkey name : dram_para, pin count : 0
  334. [    0.404017] mainkey name : gmac0, pin count : 16
  335. [    0.404029] mainkey name : wakeup_src_para, pin count : 3
  336. [    0.404042] mainkey name : twi0, pin count : 2
  337. [    0.404052] mainkey name : twi1, pin count : 2
  338. [    0.404062] mainkey name : twi2, pin count : 2
  339. [    0.404072] mainkey name : twi3, pin count : 2
  340. [    0.404083] mainkey name : twi4, pin count : 2
  341. [    0.404093] mainkey name : uart0, pin count : 2
  342. [    0.404103] mainkey name : uart1, pin count : 4
  343. [    0.404113] mainkey name : uart2, pin count : 4
  344. [    0.404123] mainkey name : uart3, pin count : 4
  345. [    0.404134] mainkey name : uart4, pin count : 4
  346. [    0.404144] mainkey name : uart5, pin count : 4
  347. [    0.404154] mainkey name : spi0, pin count : 4
  348. [    0.404164] mainkey name : spi1, pin count : 0
  349. [    0.404174] mainkey name : spi2, pin count : 4
  350. [    0.404184] mainkey name : spi3, pin count : 7
  351. [    0.404195] mainkey name : spi_devices, pin count : 0
  352. [    0.404205] mainkey name : spi_board0, pin count : 0
  353. [    0.404215] mainkey name : rtp_para, pin count : 0
  354. [    0.404225] mainkey name : ctp_para, pin count : 0
  355. [    0.404235] mainkey name : ctp_list_para, pin count : 0
  356. [    0.404245] mainkey name : tkey_para, pin count : 0
  357. [    0.404255] mainkey name : motor_para, pin count : 0
  358. [    0.404265] mainkey name : ths_para, pin count : 0
  359. [    0.404275] mainkey name : cooler_table, pin count : 0
  360. [    0.404286] mainkey name : nand0_para, pin count : 19
  361. [    0.404299] mainkey name : nand1_para, pin count : 19
  362. [    0.404312] mainkey name : disp_init, pin count : 0
  363. [    0.404323] mainkey name : lcd0_para, pin count : 10
  364. [    0.404335] map mainkey [lcd0_para] to pinctrl, map number [2]
  365. [    0.404349] mainkey name : hdmi_para, pin count : 0
  366. [    0.404360] mainkey name : pwm0_para, pin count : 1
  367. [    0.404371] mainkey name : pwm1_para, pin count : 1
  368. [    0.404381] mainkey name : csi0, pin count : 5
  369. [    0.404392] mainkey name : csi1, pin count : 0
  370. [    0.404402] mainkey name : tvout_para, pin count : 0
  371. [    0.404412] mainkey name : tvin_para, pin count : 0
  372. [    0.404422] mainkey name : mmc0_para, pin count : 7
  373. [    0.404433] mainkey name : mmc1_para, pin count : 6
  374. [    0.404445] mainkey name : mmc2_para, pin count : 11
  375. [    0.404457] mainkey name : mmc3_para, pin count : 11
  376. [    0.404470] mainkey name : smc_para, pin count : 0
  377. [    0.404480] mainkey name : usbc0, pin count : 2
  378. [    0.404490] map mainkey [usbc0] to pinctrl, map number [2]
  379. [    0.404502] mainkey name : usbc1, pin count : 1
  380. [    0.404513] mainkey name : usbc2, pin count : 1
  381. [    0.404524] mainkey name : usbc3, pin count : 0
  382. [    0.404534] mainkey name : usb_feature, pin count : 0
  383. [    0.404544] mainkey name : msc_feature, pin count : 0
  384. [    0.404555] mainkey name : serial_feature, pin count : 0
  385. [    0.404565] mainkey name : gsensor_para, pin count : 1
  386. [    0.404577] mainkey name : gsensor_list_para, pin count : 0
  387. [    0.404588] mainkey name : gps_para, pin count : 0
  388. [    0.404598] mainkey name : wifi_para, pin count : 11
  389. [    0.404610] mainkey name : 3g_para, pin count : 5
  390. [    0.404622] mainkey name : gy_para, pin count : 1
  391. [    0.404634] mainkey name : gy_list_para, pin count : 0
  392. [    0.404646] mainkey name : ls_para, pin count : 1
  393. [    0.404659] mainkey name : ls_list_para, pin count : 0
  394. [    0.404671] mainkey name : compass_para, pin count : 0
  395. [    0.404683] mainkey name : led_para, pin count : 3
  396. [    0.404695] mainkey name : bt_para, pin count : 0
  397. [    0.404705] mainkey name : s_i2s1, pin count : 9
  398. [    0.404717] mainkey name : audio0, pin count : 2
  399. [    0.404728] mainkey name : spdif0, pin count : 2
  400. [    0.404738] mainkey name : s_cir0, pin count : 1
  401. [    0.404749] mainkey name : cir, pin count : 1
  402. [    0.404760] mainkey name : pmu1_para, pin count : 0
  403. [    0.404770] mainkey name : pmu2_para, pin count : 0
  404. [    0.404781] mainkey name : dvfs_table, pin count : 0
  405. [    0.404791] mainkey name : Vdevice, pin count : 0
  406. [    0.404802] mainkey name : s_uart0, pin count : 2
  407. [    0.404813] mainkey name : s_rsb0, pin count : 2
  408. [    0.404823] mainkey name : s_jtag0, pin count : 4
  409. [    0.404835] mainkey name : s_powchk, pin count : 0
  410. [    0.404847] mainkey name : dram_dvfs_table, pin count : 0
  411. [    0.404857] axp pinctrl driver probe ok
  412. [    0.407416] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  413. [    0.407432] hw-breakpoint: maximum watchpoint size is 8 bytes.
  414. [    0.408124] [sunxi-module]: [sunxi-module.0] probe success
  415. [    0.408309] Not Found clk pll3 in script
  416. [    0.408320] Not Found clk pll7 in script
  417. [    0.408340] script config pll8 to 297 Mhz
  418. [    0.408379] script config pll10 to 2376 Mhz
  419. [    0.408654] sunxi_default_clk_init
  420. [    0.455127] bio: create slab <bio-0> at 0
  421. [    0.455601] [ARISC] :sunxi-arisc driver v2.00
  422. [    0.501376] [ARISC] :arisc version: [v0.0.23]
  423. [    0.501396] [sunxi-module]: arisc register success
  424. [    0.904300] [ARISC] :sunxi-arisc driver v2.00 startup succeeded
  425. [    0.952097] CPU4: Booted secondary processor
  426. [    0.952163] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  427. [    0.998729] CPU5: Booted secondary processor
  428. [    0.998794] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  429. [    1.048821] CPU6: Booted secondary processor
  430. [    1.048892] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  431. [    1.098890] CPU7: Booted secondary processor
  432. [    1.098963] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  433. [    1.106274] SCSI subsystem initialized
  434. [    1.107238] usbcore: registered new interface driver usbfs
  435. [    1.107608] usbcore: registered new interface driver hub
  436. [    1.107862] usbcore: registered new device driver usb
  437. [    1.108603] sunxi_i2c_adap_init()1438 - [Jun 23 2014 17:03:34]Sunxi I2C init ...
  438. [    1.108630] twi_chan_cfg()350 - [twi0] fetch twi_regulator from sysconfig failed
  439. [    1.108648] twi_chan_cfg()350 - [twi1] fetch twi_regulator from sysconfig failed
  440. [    1.108664] twi_chan_cfg()350 - [twi2] fetch twi_regulator from sysconfig failed
  441. [    1.108681] twi_chan_cfg()350 - [twi3] fetch twi_regulator from sysconfig failed
  442. [    1.108697] twi_chan_cfg()350 - [twi4] fetch twi_regulator from sysconfig failed
  443. [    1.110297] Linux video capture interface: v2.00
  444. [    1.111298] axp22_board axp22_board: AXP (CHIP ID: 0x62) detected
  445. [    1.116505] axp22_RTC: 3000 mV
  446. [    1.116992] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
  447. [    1.117425] axp22_aldo2: 700 <--> 3300 mV at 1800 mV
  448. [    1.117831] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
  449. [    1.118252] axp22_dldo1: 700 <--> 4200 mV at 3400 mV
  450. [    1.118746] axp22_dldo2: 700 <--> 3300 mV at 3000 mV
  451. [    1.119162] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
  452. [    1.119558] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
  453. [    1.119974] axp22_eldo3: 700 <--> 3300 mV at 3000 mV
  454. [    1.120374] axp22_dc5ldo: 700 <--> 1400 mV at 900 mV
  455. [    1.120772] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
  456. [    1.121181] axp22_dcdc2: 600 <--> 1540 mV at 900 mV
  457. [    1.121610] axp22_dcdc3: 600 <--> 1860 mV at 900 mV
  458. [    1.122025] axp22_dcdc4: 600 <--> 2600 mV at 900 mV
  459. [    1.122446] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
  460. [    1.122861] axp22_ldoio0: 700 <--> 3300 mV at 3000 mV
  461. [    1.123285] axp22_ldoio1: 700 <--> 3300 mV at 2500 mV
  462. [    1.123686] axp22_sw0: at 700 mV
  463. [    1.124377] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
  464. [    1.128010] now_rest_vol = 100
  465. [    1.129441] axp15_board axp15_board: AXP (CHIP ID: 0x60) detected
  466. [    1.133656] axp15_aldo1: 700 <--> 3300 mV at 3000 mV
  467. [    1.134124] axp15_aldo2: 700 <--> 3300 mV at 700 mV
  468. [    1.134541] axp15_aldo3: 700 <--> 3300 mV at 700 mV
  469. [    1.134961] axp15_bldo1: 700 <--> 1900 mV at 1800 mV
  470. [    1.135383] axp15_bldo2: 700 <--> 1900 mV at 1800 mV
  471. [    1.135828] axp15_bldo3: 700 <--> 1900 mV at 700 mV
  472. [    1.136224] axp15_bldo4: 700 <--> 1900 mV at 700 mV
  473. [    1.136613] axp15_cldo1: 700 <--> 3300 mV at 3000 mV
  474. [    1.137012] axp15_cldo2: 700 <--> 4200 mV at 700 mV
  475. [    1.137415] axp15_cldo3: 700 <--> 3300 mV at 700 mV
  476. [    1.137816] axp15_dcdc1: 600 <--> 1520 mV at 840 mV
  477. [    1.138217] axp15_dcdc2: 1000 <--> 2550 mV at 1350 mV
  478. [    1.138762] axp15_dcdc3: 600 <--> 1520 mV at 900 mV
  479. [    1.139463] axp15_dcdc4: 600 <--> 3300 mV at 900 mV
  480. [    1.140097] axp15_dcdc5: 1100 <--> 3400 mV at 2100 mV
  481. [    1.140690] axp15_sw0: at 700 mV
  482. [    1.142261] Advanced Linux Sound Architecture Driver Version 1.0.25.
  483. [    1.143492] Bluetooth: Core ver 2.16
  484. [    1.143699] NET: Registered protocol family 31
  485. [    1.143710] Bluetooth: HCI device and connection manager initialized
  486. [    1.143725] Bluetooth: HCI socket layer initialized
  487. [    1.143736] Bluetooth: L2CAP socket layer initialized
  488. [    1.143768] Bluetooth: SCO socket layer initialized
  489. [    1.144347] cfg80211: Calling CRDA to update world regulatory domain
  490. [    1.147018] Switching to clocksource arch_sys_counter
  491. [    1.170365] FS-Cache: Loaded
  492. [    1.170924] CacheFiles: Loaded
  493. [    1.194105] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
  494. [    1.194128] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  495. [    1.194139] [sunxi_hci_sunxi]: get usb_regulator is failed
  496. [    1.194158] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
  497. [    1.194171] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  498. [    1.194181] [sunxi_hci_sunxi]: get usb_regulator is failed
  499. [    1.194430] [sunxi_hci_sunxi]: sunxi-ehci2(restrict_gpio) is invalid
  500. [    1.194446] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  501. [    1.194456] [sunxi_hci_sunxi]: get usb_regulator is failed
  502. [    1.194472] [sunxi_hci_sunxi]: sunxi-ohci2(restrict_gpio) is invalid
  503. [    1.194487] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  504. [    1.194499] [sunxi_hci_sunxi]: get usb_regulator is failed
  505. [    1.194538] [sunxi_hci_sunxi]: sunxi-ehci3(restrict_gpio) is invalid
  506. [    1.194552] [sunxi_hci_sunxi]: sunxi-ehci3(drv vbus) is invalid
  507. [    1.194564] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  508. [    1.194574] [sunxi_hci_sunxi]: get usb_regulator is failed
  509. [    1.194589] [sunxi_hci_sunxi]: sunxi-ohci3(restrict_gpio) is invalid
  510. [    1.194602] [sunxi_hci_sunxi]: sunxi-ohci3(drv vbus) is invalid
  511. [    1.194615] [sunxi_hci_sunxi]: get usb_restrict_flag failed
  512. [    1.194626] [sunxi_hci_sunxi]: get usb_regulator is failed
  513. [    1.195919] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
  514. [    1.195943] get usbc(0) usb_restrict_flag failed
  515. [    1.195961] no usbc(0) det_vbus gpio and try to axp det_pin
  516. [    1.195974] get usbc0(usb_restrict pin) failed
  517. [    1.196928] [ddrfreq] dram_clk value is 2a0
  518. [    1.196939] [ddrfreq] sunxi_dramfreq_max=672000
  519. [    1.196949] [ddrfreq] dram_type value is 3
  520. [    1.196959] [ddrfreq] dram_zq value is 3f3fdd
  521. [    1.196969] [ddrfreq] dram_odt_en value is 0
  522. [    1.196979] [ddrfreq] dram_para1 value is 10f40800
  523. [    1.196989] [ddrfreq] dram_para2 value is 1200
  524. [    1.196999] [ddrfreq] dram_mr0 value is 1a50
  525. [    1.197009] [ddrfreq] dram_mr1 value is 40
  526. [    1.197018] [ddrfreq] dram_mr2 value is 10
  527. [    1.197028] [ddrfreq] dram_mr3 value is 0
  528. [    1.197037] [ddrfreq] dram_tpr0 value is 4e214ea
  529. [    1.197047] [ddrfreq] dram_tpr1 value is 4214ad
  530. [    1.197058] [ddrfreq] dram_tpr2 value is 10a75030
  531. [    1.197068] [ddrfreq] dram_tpr3 value is 0
  532. [    1.197078] [ddrfreq] dram_tpr4 value is 0
  533. [    1.197087] [ddrfreq] dram_tpr5 value is 0
  534. [    1.197097] [ddrfreq] dram_tpr6 value is 0
  535. [    1.197299] [ddrfreq] dram_tpr7 value is 0
  536. [    1.197309] [ddrfreq] dram_tpr8 value is 0
  537. [    1.197319] [ddrfreq] dram_tpr9 value is 0
  538. [    1.197329] [ddrfreq] dram_tpr10 value is 0
  539. [    1.197338] [ddrfreq] dram_tpr11 value is 0
  540. [    1.197348] [ddrfreq] dram_tpr12 value is a8
  541. [    1.197357] [ddrfreq] sunxi_dramfreq_min=168000
  542. [    1.197367] [ddrfreq] dram_tpr13 value is 23
  543. [    1.208399] [ddrfreq] LV_count value is 3
  544. [    1.208425] [ddrfreq] ---------------Dram V-F Table---------------
  545. [    1.208437] [ddrfreq] voltage =  900mv       frequency = 672000KHz
  546. [    1.208447] [ddrfreq] voltage =  800mv       frequency = 168000KHz
  547. [    1.208457] [ddrfreq] voltage =  800mv       frequency =    0KHz
  548. [    1.208467] [ddrfreq] --------------------------------------------
  549. [    1.208598] [ddrfreq] last_vdd=900
  550. [    1.208612] [ddrfreq] __sram_start: 0xc09b8000, __sram_end: 0xc09b9078, __sram_text_start: 0xf0014000, __sram_data_end: 0xf0015078
  551. [    1.208625] [ddrfreq] sunxi dramfreq probe ok!
  552. [    1.209132] NET: Registered protocol family 2
  553. [    1.209443] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  554. [    1.210363] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  555. [    1.213211] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  556. [    1.215080] TCP: Hash tables configured (established 131072 bind 65536)
  557. [    1.215092] TCP: reno registered
  558. [    1.215106] UDP hash table entries: 512 (order: 2, 16384 bytes)
  559. [    1.215161] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  560. [    1.215596] NET: Registered protocol family 1
  561. [    1.216028] RPC: Registered named UNIX socket transport module.
  562. [    1.216040] RPC: Registered udp transport module.
  563. [    1.216049] RPC: Registered tcp transport module.
  564. [    1.216059] RPC: Registered tcp NFSv4.1 backchannel transport module.
  565. [    1.216311] Unpacking initramfs...
  566. [    1.696102] Freeing initrd memory: 2516K
  567. [    1.696843] [powernow inf] module init
  568. [    1.697163] [powernow inf] create class sw_powernow done
  569. [    1.697176] [pm]aw_pm_init!
  570. [    1.697189] standby_mode = 1.
  571. [    1.697199] wakeup src cnt is : 3.
  572. [    1.697210] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
  573. [    1.697222] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
  574. [    1.697234] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
  575. [    1.697246] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
  576. [    1.697257] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x18
  577. [    1.697269] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
  578. [    1.697281] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
  579. [    1.697293] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x2018
  580. [    1.697305] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
  581. [    1.697330] [wifi]: select wifi: ap6330 !!
  582. [    1.697728] [ap6xxx]: module power name axp22_dldo1
  583. [    1.697742] [ap6xxx]: module power ext1 name axp15_cldo3
  584. [    1.697753] [ap6xxx]: module power ext2 name axp22_ldoio0
  585. [    1.697763] [ap6xxx]: sdio_power name
  586. [    1.697904] [ap6xxx]: ap6xxx module power set by axp.
  587. [    1.698747] [ap6xxx]: regulator axp22_dldo1 on.
  588. [    1.699342] [ap6xxx]: regulator axp15_cldo3 on.
  589. [    1.699426] [ap6xxx]: regulator axp22_ldoio0 on.
  590. [    1.699590] [ap6xxx]: set cko2 32k clk out
  591. [    1.699681] [wifi_pm]: wifi gpio init is OK !!
  592. [    1.699877] sunxi_reg_init enter
  593. [    1.701543] audit: initializing netlink socket (disabled)
  594. [    1.701597] type=2000 audit(1.670:1): initialized
  595. [    1.703188] highmem bounce pool size: 64 pages
  596. [    1.705260] NTFS driver 2.1.30 [Flags: R/W].
  597. [    1.705439] fuse init (API version 7.18)
  598. [    1.706476] msgmni has been set to 1187
  599. [    1.706524] SELinux:  Registering netfilter hooks
  600. [    1.709021] io scheduler noop registered
  601. [    1.709034] io scheduler deadline registered
  602. [    1.709143] io scheduler cfq registered (default)
  603. [    1.709963] GTBUS_PMU GTBUS_PMU: probed
  604. [    1.710375] pwm module init!
  605. [    1.711726] sunxi_uart_init()1442 - Sunxi Uart driver init ...
  606. [    1.711755] sw_uart_get_devinfo()1426 - uart0 fetch uart_regulator from sysconfig failed
  607. [    1.711776] sw_uart_get_devinfo()1426 - uart2 fetch uart_regulator from sysconfig failed
  608. [    1.712593] uart0: ttyS0 at MMIO 0x7000000 (irq = 32) is a SUNXI
  609. [    1.712617] sw_console_setup()1186 - console setup baud 115200 parity n bits 8, flow n
  610. [    1.808617] console [ttyS0] enabled
  611. [    3.948774] uart2: ttyS2 at MMIO 0x7000800 (irq = 34) is a SUNXI
  612. [    3.957398] G2D: drv_g2d_init
  613. [    3.960883] G2D: Module initialized.major:251
  614. [    3.973438] loop: module loaded
  615. [    3.976951] sunxi_hw_init: sunxi debug register driver init
  616. [    3.983945] sunxi_spi_init()2048 - [Jun 23 2014 17:04:15]Sunxi SPI init ...
  617. [    3.991870] sunxi_spi_chan_cfg()1368 - [spi-0] fetch spi_regulator from sysconfig failed
  618. [    4.000930] sunxi_spi_chan_cfg()1368 - [spi-1] fetch spi_regulator from sysconfig failed
  619. [    4.009947] sunxi_spi_chan_cfg()1368 - [spi-2] fetch spi_regulator from sysconfig failed
  620. [    4.018953] sunxi_spi_chan_cfg()1368 - [spi-3] fetch spi_regulator from sysconfig failed
  621. [    4.028268] tun: Universal TUN/TAP device driver, 1.6
  622. [    4.033874] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  623. [    4.041088] PPP generic driver version 2.4.2
  624. [    4.046300] PPP BSD Compression module registered
  625. [    4.051574] PPP Deflate Compression module registered
  626. [    4.057902] PPP MPPE Compression module registered
  627. [    4.063223] NET: Registered protocol family 24
  628. [    4.068228] PPTP driver version 0.8.5
  629. [    4.073114] start: sunxi_open_usb_clock
  630. [    4.077508] end: sunxi_open_usb_clock
  631. [    4.081804] get usbc0_regulator is failed
  632. [    4.286304] sunxi_controller_mode:device!
  633. [    4.291815] sunxi_controller_mode:NULL!
  634. [    4.296072] start: sunxi_close_usb_clock
  635. [    4.300462] end: sunxi_close_usb_clock
  636. [    4.304622] otgc_work_mode:0
  637. [    4.308051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  638. [    4.315383] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0a2a80c
  639. [    4.326744] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
  640. [    4.333869] [sunxi_hci_sunxi]: clk_prepare_enable: hci_ahb_gate
  641. [    4.340476] [sunxi_hci_sunxi]: [sunxi-ehci1]: open hci clock,usbc_no:1, is_ohci:0
  642. [    4.348806] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
  643. [    4.355292] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  644. [    4.364217] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  645. [    4.372753] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf0a00000
  646. [    4.397132] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  647. [    4.404672] hub 1-0:1.0: USB hub found
  648. [    4.408886] hub 1-0:1.0: 1 port detected
  649. [    4.413823] [sunxi_hci_sunxi]: [sunxi-ehci2]: probe, pdev->name: sunxi-ehci, pdev->id: 2, sunxi_ehci: 0xc0a2aa14
  650. [    4.425159] [sunxi_hci_sunxi]: [sunxi-ehci2]: open clock, is_open: 0
  651. [    4.432277] [sunxi_hci_sunxi]: [sunxi-ehci2]: open hci clock,usbc_no:2, is_ohci:0
  652. [    4.440607] [sunxi_hci_sunxi]: [sunxi-ehci2]: Set USB Power ON
  653. [    4.447086] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  654. [    4.456008] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
  655. [    4.464534] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf0a01000
  656. [    4.487132] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
  657. [    4.494579] hub 2-0:1.0: USB hub found
  658. [    4.498781] hub 2-0:1.0: 1 port detected
  659. [    4.503690] [sunxi_hci_sunxi]: [sunxi-ehci3]: probe, pdev->name: sunxi-ehci, pdev->id: 3, sunxi_ehci: 0xc0a2ac1c
  660. [    4.515126] [sunxi_hci_sunxi]: [sunxi-ehci3]: open clock, is_open: 0
  661. [    4.522203] [sunxi_hci_sunxi]: [sunxi-ehci3]: open hci clock,usbc_no:3, is_ohci:0
  662. [    4.530527] [sunxi_hci_sunxi]: [sunxi-ehci3]: Set USB Power ON
  663. [    4.537007] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  664. [    4.545924] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3
  665. [    4.554488] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf0a02000
  666. [    4.577128] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00
  667. [    4.584564] hub 3-0:1.0: USB hub found
  668. [    4.588785] hub 3-0:1.0: 1 port detected
  669. [    4.593852] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  670. [    4.600874] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc0a2a910
  671. [    4.612201] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
  672. [    4.619308] [sunxi_hci_sunxi]: [sunxi-ohci1]: open hci clock,usbc_no:1, is_ohci:1
  673. [    4.627661] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  674. [    4.636184] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
  675. [    4.644639] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf0a00400
  676. [    4.711993] hub 4-0:1.0: USB hub found
  677. [    4.716169] hub 4-0:1.0: 1 port detected
  678. [    4.721110] [sunxi_hci_sunxi]: [sunxi-ohci3]: probe, pdev->name: sunxi-ohci, pdev->id: 3, sunxi_ohci: 0xc0a2ad20
  679. [    4.732454] [sunxi_hci_sunxi]: [sunxi-ohci3]: open clock, is_open: 0
  680. [    4.739559] [sunxi_hci_sunxi]: [sunxi-ohci3]: open hci clock,usbc_no:3, is_ohci:1
  681. [    4.747902] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver
  682. [    4.756422] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 5
  683. [    4.764870] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf0a02400
  684. [    4.832014] hub 5-0:1.0: USB hub found
  685. [    4.836194] hub 5-0:1.0: 1 port detected
  686. [    4.841538] Initializing USB Mass Storage driver...
  687. [    4.847335] usbcore: registered new interface driver usb-storage
  688. [    4.854003] USB Mass Storage support registered.
  689. [    4.859361] usbcore: registered new interface driver ums-alauda
  690. [    4.866134] usbcore: registered new interface driver ums-cypress
  691. [    4.873035] usbcore: registered new interface driver ums-datafab
  692. [    4.879935] usbcore: registered new interface driver ums_eneub6250
  693. [    4.886982] usbcore: registered new interface driver ums-freecom
  694. [    4.893867] usbcore: registered new interface driver ums-isd200
  695. [    4.900649] usbcore: registered new interface driver ums-jumpshot
  696. [    4.907634] usbcore: registered new interface driver ums-karma
  697. [    4.914298] usbcore: registered new interface driver ums-onetouch
  698. [    4.921360] usbcore: registered new interface driver ums-realtek
  699. [    4.928210] usbcore: registered new interface driver ums-sddr09
  700. [    4.934975] usbcore: registered new interface driver ums-sddr55
  701. [    4.941809] usbcore: registered new interface driver ums-usbat
  702. [    4.948724] usbcore: registered new interface driver usbserial
  703. [    4.955200] usbserial: USB Serial Driver core
  704. [    4.960305] usbcore: registered new interface driver option
  705. [    4.966662] USB Serial support registered for GSM modem (1-port)
  706. [    4.974902] file system registered
  707. [    4.982303]  gadget: Mass Storage Function, version: 2009/09/11
  708. [    4.988933]  gadget: Number of LUNs=3
  709. [    4.992998]  lun0: LUN: removable file: (no medium)
  710. [    4.998502]  lun1: LUN: removable file: (no medium)
  711. [    5.003917]  lun2: LUN: removable file: (no medium)
  712. [    5.010165] android_bind, serial_unique = 0
  713. [    5.014824]  gadget: android_usb ready
  714. [    5.019827] mousedev: PS/2 mouse device common for all mice
  715. [    5.026986] input: sunxi-keyboard as /devices/virtual/input/input1
  716. [    5.034450] usbcore: registered new interface driver xpad
  717. [    5.041240] sunxi_rtc_init(736): sunxi rtc device register!
  718. [    5.048127] rtc_gettime(323): read time 1970-1-1 1:0:9
  719. [    5.054108] alarm_gettime(460): get alarm time 1970-1-1 1:0:0 success!
  720. [    5.061648] rtc_gettime(323): read time 1970-1-1 1:0:9
  721. [    5.067778] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  722. [    5.073738] sunxi_rtc_probe(690)!
  723. [    5.077958] sunxi cedar version 0.1
  724. [    5.082009] [cedar]: install start!!!
  725. [    5.086718] [cedar]: install end!!!
  726. [    5.094887] axp22_aldo1: Failed to create debugfs directory
  727. [    5.104920] axp22_dcdc4: Failed to create debugfs directory
  728. [    5.120599] axp15_dcdc4: Failed to create debugfs directory
  729. [    5.127923] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  730. [    5.137385] Bluetooth: HCI UART driver ver 2.2
  731. [    5.142324] Bluetooth: HCI H4 protocol initialized
  732. [    5.147700] Bluetooth: HCI Realtek H5 protocol initialized
  733. [    5.154183] [cpu_freq] INF: merge_cluster_tables: index: 0, freq: 1800000
  734. [    5.162234] [cpu_freq] INF: merge_cluster_tables: index: 1, freq: 1608000
  735. [    5.169799] [cpu_freq] INF: merge_cluster_tables: index: 2, freq: 1536000
  736. [    5.177353] [cpu_freq] INF: merge_cluster_tables: index: 3, freq: 1440000
  737. [    5.184892] [cpu_freq] INF: merge_cluster_tables: index: 4, freq: 1296000
  738. [    5.192445] [cpu_freq] INF: merge_cluster_tables: index: 5, freq: 1008000
  739. [    5.200107] [cpu_freq] INF: merge_cluster_tables: index: 6, freq: 912000
  740. [    5.207621] [cpu_freq] INF: merge_cluster_tables: index: 7, freq: 768000
  741. [    5.215096] [cpu_freq] INF: merge_cluster_tables: index: 8, freq: 600000
  742. [    5.222558] [cpu_freq] INF: merge_cluster_tables: index: 9, freq: 600000
  743. [    5.230016] [cpu_freq] INF: merge_cluster_tables: index: 10, freq: 564000
  744. [    5.237619] [cpu_freq] INF: merge_cluster_tables: index: 11, freq: 504000
  745. [    5.245158] [cpu_freq] INF: merge_cluster_tables: index: 12, freq: 456000
  746. [    5.252738] [cpu_freq] INF: merge_cluster_tables: index: 13, freq: 432000
  747. [    5.260294] [cpu_freq] INF: merge_cluster_tables: index: 14, freq: 360000
  748. [    5.267850] [cpu_freq] INF: merge_cluster_tables: index: 15, freq: 300000
  749. [    5.275392] [cpu_freq] INF: merge_cluster_tables: index: 16, freq: 240000
  750. [    5.282963] [cpu_freq] INF: merge_cluster_tables: End, table: e6136b40, count: 17
  751. [    5.291323] axp22_dcdc3: Failed to create debugfs directory
  752. [    5.297542] axp15_dcdc1: Failed to create debugfs directory
  753. [    5.303751] [cpu_freq] INF: sunxi_cpufreq_init, get cpu frequency from sysconfig, c0_max: 1200MHz, c0_min: 480MHz, c1_max: 1800MHz, c1_min: 600MHz
  754. [    5.321389] [cpu_freq] INF: sunxi register cpufreq driver succeed
  755. [    5.328177] [cpu_freq] INF: sunxi register bL notifier succeed
  756. [    5.334654] [cpu_freq] INF: sunxi_cpufreq_init: done!
  757. [    5.340469] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.71 2014-05-26 14:45) Compiled in Jun 23 2014 at 17:03:58
  758. [    5.351893] [mmc]: sunxi_mci_init
  759. [    5.355587] [mmc]: get mmc0's sdc_ex_dly_used failed,use default dly
  760. [    5.362706] [mmc]: get mmc1's sdc_ex_dly_used failed,use default dly
  761. [    5.369796] [mmc]: get mmc2's sdc_ex_dly_used failed,use default dly
  762. [    5.376858] [mmc]: MMC host used card: 0x7, boot card: 0x4, io_card 2
  763. [    5.385181] [mmc]: --2 sdc 2 - 48000000
  764. [    5.389850] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  765. [    5.400748] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  766. [    5.410454] [mmc]: sdc2 Probe: base:0xf1c11000 irq:94 sg_cpu:ffdd2000(461f4000) ret 0.
  767. [    5.420877] [mmc]: --2 sdc 0 - 48000000
  768. [    5.425745] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  769. [    5.436690] [mmc]: sdc0 Probe: base:0xf1c0f000 irq:92 sg_cpu:ffdd1000(461f7000) ret 0.
  770. [    5.445519] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  771. [    5.455858] [mmc]: sdc0: no card detected, try to shutdown io voltage.
  772. [    5.464947] [mmc]: --2 sdc 1 - 48000000
  773. [    5.469557] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  774. [    5.480473] [mmc]: sdc1 Probe: base:0xf1c10000 irq:93 sg_cpu:ffdd0000(461f9000) ret 0.
  775. [    5.489286] [mmc]: sdc1: no card detected, try to shutdown io voltage.
  776. [    5.508650] usbcore: registered new interface driver usbhid
  777. [    5.514846] usbhid: USB HID core driver
  778. [    5.520060] ashmem: initialized
  779. [    5.523812] logger: created 256K log 'log_main'
  780. [    5.529149] logger: created 256K log 'log_events'
  781. [    5.534386] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 52,  RTO !!
  782. [    5.542811] logger: created 256K log 'log_radio'
  783. [    5.547991] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 52,  RTO !!
  784. [    5.556232] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  785. [    5.568076] logger: created 256K log 'log_system'
  786. [    5.574324] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  787. [    5.586447] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 8,  RTO !!
  788. [    5.594618] *******************Try sdio*******************
  789. [    5.601553] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5,  RTO !!
  790. [    5.610038] axp device register ok and device_create_file ok
  791. [    5.616333] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5,  RTO !!
  792. [    5.625211] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5,  RTO !!
  793. [    5.634178] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 5,  RTO !!
  794. [    5.642250] *******************Try sd *******************
  795. [    5.649078] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55,  RTO !!
  796. [    5.657522] sunxi_snddaudio_init, line:206
  797. [    5.662072] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55,  RTO !!
  798. [    5.670331] sunxi_snddaudio_init, line:212, daudio_used:1
  799. [    5.676339] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55,  RTO !!
  800. [    5.684737] soc-audio soc-audio.4: ASoC machine snddaudio should use snd_soc_register_card()
  801. [    5.694133] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 2 err, cmd 55,  RTO !!
  802. [    5.702284] *******************Try mmc*******************
  803. [    5.708352] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  804. [    5.718940] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  805. [    5.729180] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  806. [    5.739720] input: headset as /devices/virtual/input/input2
  807. [    5.746257] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  808. [    5.762932] asoc: sndvir_audio <-> s_i2s1 mapping ok
  809. [    5.768502] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  810. [    5.783026] soc-audio soc-audio.0: ASoC machine sndhdmi should use snd_soc_register_card()
  811. [    5.794399] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  812. [    5.801902] u32 classifier
  813. [    5.804913]     Actions configured
  814. [    5.808714] Netfilter messages via NETLINK v0.30.
  815. [    5.814017] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  816. [    5.820815] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  817. [    5.831798] ctnetlink v0.93: registering with nfnetlink.
  818. [    5.837807] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  819. [    5.845544] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  820. [    5.852590] xt_time: kernel timezone is -0000
  821. [    5.857473] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  822. [    5.868032] IPv4 over IPv4 tunneling driver
  823. [    5.873719] gre: GRE over IPv4 demultiplexor driver
  824. [    5.879170] ip_gre: GRE over IPv4 tunneling driver
  825. [    5.885638] ip_tables: (C) 2000-2006 Netfilter Core Team
  826. [    5.891797] arp_tables: (C) 2002 David S. Miller
  827. [    5.897000] TCP: cubic registered
  828. [    5.900745] Initializing XFRM netlink socket
  829. [    5.905763] NET: Registered protocol family 10
  830. [    5.911940] Mobile IPv6
  831. [    5.914694] ip6_tables: (C) 2000-2006 Netfilter Core Team
  832. [    5.920949] IPv6 over IPv4 tunneling driver
  833. [    5.927249] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  834. [    5.937695] [mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  835. [    5.948895] NET: Registered protocol family 17
  836. [    5.953870] NET: Registered protocol family 15
  837. [    5.958972] Bluetooth: RFCOMM TTY layer initialized
  838. [    5.964408] Bluetooth: RFCOMM socket layer initialized
  839. [    5.970134] Bluetooth: RFCOMM ver 1.11
  840. [    5.974299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  841. [    5.980278] Bluetooth: BNEP filters: protocol multicast
  842. [    5.986087] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  843. [    5.992950] L2TP core driver, V2.0
  844. [    5.996741] PPPoL2TP kernel driver, V2.0
  845. [    6.001239] [mmc]: sdc2 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  846. [    6.011993] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  847. [    6.020535] ThumbEE CPU extension supported.
  848. [    6.025298] Registering SWP/SWPB emulation handler
  849. [    6.030802] mmc0: new high speed MMC card at address 0001
  850. [    6.038152] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  851. [    6.043615] mmcblk0boot0: mmc0:0001 AWMB3R partition 1 4.00 MiB
  852. [    6.050434] mmcblk0boot1: mmc0:0001 AWMB3R partition 2 4.00 MiB
  853. [    6.058927] axp15_dcdc5: incomplete constraints, leaving on
  854. [    6.059253]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 >
  855. [    6.059299] mmcblk0: p1 size 27381760 extends beyond EOD, truncated
  856. [    6.065442]  mmcblk0boot1: unknown partition table
  857. [    6.066618]  mmcblk0boot0: unknown partition table
  858. [    6.066957] *******************mmc init ok *******************
  859. [    6.095941] axp15_dcdc4: incomplete constraints, leaving on
  860. [    6.102382] axp15_dcdc1: incomplete constraints, leaving on
  861. [    6.108820] axp15_bldo2: incomplete constraints, leaving on
  862. [    6.115095] axp15_bldo1: incomplete constraints, leaving on
  863. [    6.121457] axp15_aldo1: incomplete constraints, leaving on
  864. [    6.127780] axp22_ldoio1: incomplete constraints, leaving on
  865. [    6.134153] axp22_dcdc5: incomplete constraints, leaving on
  866. [    6.140440] axp22_dcdc4: incomplete constraints, leaving on
  867. [    6.146713] axp22_dcdc3: incomplete constraints, leaving on
  868. [    6.153040] axp22_dcdc1: incomplete constraints, leaving on
  869. [    6.159328] axp22_dc5ldo: incomplete constraints, leaving on
  870. [    6.165698] axp22_eldo3: incomplete constraints, leaving on
  871. [    6.171985] axp22_eldo2: incomplete constraints, leaving on
  872. [    6.178308] axp22_dldo2: incomplete constraints, leaving on
  873. [    6.184583] axp22_aldo3: incomplete constraints, leaving on
  874. [    6.190872] axp22_aldo2: incomplete constraints, leaving on
  875. [    6.197303] otg_wakelock_init: No USB transceiver found
  876. [    6.203428] rtc_gettime(323): read time 1970-1-1 1:0:10
  877. [    6.209312] rtc0 rtc0: setting system clock to 1970-01-01 01:00:10 UTC (3610)
  878. [    6.217805] input: sunxi-ths as /devices/virtual/input/input3
  879. [    6.224851] suxi_ths: Kernel Thermal management registered
  880. [    6.231530] suxi_ths: Kernel Thermal management registered
  881. [    6.238460] sunxi_ths_bind : thermal-budget-0
  882. [    6.243141] ths_zone trip = 60, adjust lower = 0, upper = 1
  883. [    6.249607] ths_zone trip = 75, adjust lower = 1, upper = 2
  884. [    6.255851] ths_zone trip = 85, adjust lower = 2, upper = 5
  885. [    6.262105] ths_zone trip = 95, adjust lower = 5, upper = 9
  886. [    6.268361] ths_zone trip = 105, adjust lower = 0, upper = 0
  887. [    6.274704] sunxi_ths_bind : thermal-budget-0
  888. [    6.279395] ths_zone trip = 105, adjust lower = 0, upper = 9
  889. [    6.285940] CPU Budget:Register notifier
  890. [    6.290342] CPU Budget:register Success
  891. [    6.294632] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  892. [    6.309766] ALSA device list:
  893. [    6.313084]   #0: snddaudio
  894. [    6.316205]   #1: sndhdmi
  895. [    6.319427] Freeing init memory: 316K
  896. [    6.328415] SELinux: 512 avtab hash slots, 1360 rules.
  897. [    6.334560] SELinux: 512 avtab hash slots, 1360 rules.
  898. [    6.340339] SELinux:  1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
  899. [    6.348351] SELinux:  84 classes, 1360 rules
  900. [    6.353851] SELinux:  Completing initialization.
  901. [    6.359031] SELinux:  Setting up existing superblocks.
  902. [    6.364792] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  903. [    6.372802] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  904. [    6.381097] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  905. [    6.389689] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  906. [    6.397507] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  907. [    6.405605] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
  908. [    6.414728] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  909. [    6.427568] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  910. [    6.435273] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  911. [    6.442991] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  912. [    6.453140] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  913. [    6.461446] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  914. [    6.470318] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  915. [    6.478445] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  916. [    6.635377] type=1403 audit(3610.910:2): policy loaded auid=4294967295 ses=4294967295
  917. [    6.644308] SELinux: Loaded policy from /sepolicy
  918. [    6.652555] type=1404 audit(3610.940:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  919. [    8.072666] init: could not import file 'init.sun9i.3gdongle.rc' from '/init.sun9i.rc'
  920. [    8.082114] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  921. [    8.233963] init: /dev/hw_random not found
  922. [    8.253941] [NAND][NAND]nand init start, nand0_used_flag is 0
  923. [    8.260376] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
  924. [    8.268000] [NAND]run on A80
  925. [    8.271218] nand interrupte ch0 irqno: 102 register ok
  926. [    8.276938] nand interrupte ch1, irqno: 101 register ok
  927. [    8.283919] [NAND]nand driver is disabled
  928. [    8.367248] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  929. [    8.375731] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  930. [    8.385313] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  931. [    8.393792] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  932. [    8.402046] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  933. [    8.527207] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  934. [    8.545072] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
  935. [    8.554163] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
  936. [    8.580347] EXT4-fs (mmcblk0p10): recovery complete
  937. [    8.586625] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  938. [    8.598529] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
  939. [    8.737152] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
  940. [    8.786878] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  941. [    8.792097] e2fsck: /dev/block/by-name/cache: clean, 12/40960 files, 5257/163840 blocks
  942. [    8.808063] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
  943. [    8.819138] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
  944. [    8.977631] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 114506
  945. [    8.986914] EXT4-fs (mmcblk0p1): ext4_orphan_cleanup: deleting unreferenced inode 114491
  946. [    8.996093] EXT4-fs (mmcblk0p1): 2 orphan inodes deleted
  947. [    9.002019] EXT4-fs (mmcblk0p1): recovery complete
  948. [    9.014947] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  949. [    9.026690] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
  950. [    9.137175] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
  951. [    9.155162] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  952. [    9.160354] e2fsck: /dev/block/by-name/UDISK: clean, 736/855120 files, 123717/3414527 blocks
  953. [    9.177412] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
  954. [    9.189941] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
  955. [    9.371810] [DISP]disp_module_init
  956. [    9.377361] [DISP]disp_probe
  957. [    9.380723] [DISP] IEP_Deu_Init,line:216:    deu_mode1 not exist.
  958. [    9.397207] [DISP] lcd_panel_parameter_check,line:372:    lcd0para is not used
  959. [    9.407177] [DISP] lcd_panel_parameter_check,line:368:    get lcd1para lcd_used fail
  960. [    9.415806] [DISP] disp_lcd_gpio_init,line:1909:    lcd 2 is not register
  961. [    9.427179] [DISP] disp_init_hdmi,line:488:    screen 0 do not support HDMI TYPE!
  962. [    9.435568] [DISP] disp_init_hdmi,line:488:    screen 2 do not support HDMI TYPE!
  963. [    9.444301] [DISP] disp_init_connections,line:133:    smbl's set manager is NULL
  964. [    9.452604] [DISP] disp_init_connections,line:139:    capture's set manager is NULL
  965. [    9.461191] [DISP] disp_init_connections,line:145:    smcl's set manager is NULL
  966. [    9.469505] [DISP]Fb_Init
  967. [    9.472538] disp_init.disp_composer_mode = 1
  968. [    9.477364] [DISP] parser_disp_init_para,line:130:    fetch script data disp_init.screen2_output_type fail
  969. [    9.488191] [DISP] parser_disp_init_para,line:143:    invalid screen0_output_type 0
  970. [    9.496769] [DISP] parser_disp_init_para,line:147:    fetch script data disp_init.screen2_output_mode fail
  971. [    9.507607] [DISP] parser_disp_init_para,line:208:    fetch script data disp_init.fb2_format fail
  972. [    9.517557] [DISP] parser_disp_init_para,line:213:    fetch script data disp_init.fb2_scaler_mode_enable fail
  973. [    9.528676] [DISP] parser_disp_init_para,line:218:    fetch script data disp_init.fb2_width fail
  974. [    9.538525] [DISP] parser_disp_init_para,line:223:    fetch script data disp_init.fb2_height fail
  975. [    9.548639] sunxi_map_kernel ok, phys_addr=0x6d400000, size=0xfd2000, virt_addr=0xe7eee000
  976. [    9.576146] [DISP]disp_probe finish
  977. [    9.580280] [DISP]capture_module_init
  978. [    9.585404] [DISP]capture_probe
  979. [    9.589101] [DISP]capture finish
  980. [    9.592710] [DISP]disp_module_init finish
  981. [    9.619999] [LCD]lcd_module_init
  982. [    9.624627] [LCD]lcd_module_init finish
  983. [    9.647589] [DISP] disp_get_hdmi,line:41:    screen_id 0 do not support HDMI TYPE!
  984. [    9.656073] [DISP] bsp_disp_set_hdmi_func,line:1296:    get hdmi0 failed!
  985. [    9.823682] axp22_dcdc2: Failed to create debugfs directory
  986. [    9.833428] =========================================================
  987. [    9.840603]                GPU Init Information                      
  988. [    9.847871] gpu voltage         : 900 mV
  989. [    9.852266] pll9 clock frequency: 384 MHz
  990. [    9.856750] core clock frequency: 384 MHz
  991. [    9.861263] mem clock frequency : 384 MHz
  992. [    9.865747] axi clock frequency : 320 MHz
  993. [    9.870243] =========================================================
  994. [    9.958349] [VFE]Welcome to Video Front End driver
  995. [    9.964480] [VFE]pdev->id = 0
  996. [    9.967823] [VFE]dev->mipi_sel = 0
  997. [    9.971598] [VFE]dev->vip_sel = 0
  998. [    9.975279] [VFE]dev->isp_sel = 0
  999. [    9.985379] [VFE]..........................vfe clk open!.......................
  1000. [    9.993938] [VFE]vfe_init end
  1001. [    9.997302] [VFE]probe_work_handle start!
  1002. [   10.001773] [VFE]v4l2 subdev register input_num = 0
  1003. [   10.008210] axp22_aldo2: Failed to create debugfs directory
  1004. [   10.015424] axp15_aldo2: Failed to create debugfs directory
  1005. [   10.021789] axp22_eldo1: Failed to create debugfs directory
  1006. [   10.028534] axp15_cldo2: Failed to create debugfs directory
  1007. [   10.034962] [VFE]vfe sensor detect start! input_num = 0
  1008. [   10.040813] [VFE]Find sensor name is "ov16825", i2c address is 6c, type is "RAW" !
  1009. [   10.049426] [VFE]Sub device register "ov16825" start!
  1010. [   10.055162] [VFE]v4l2_device_register_subdev return 0
  1011. [   10.060793] [VFE]registered sensor subdev is OK!
  1012. [   10.065954] [VFE]Check sensor!
  1013. [   10.069583] sun fd version 0.5
  1014. [   10.073231] [fd]: install start!!!
  1015. [   10.087210] open_clk:fd_clk_rate = 320000000
  1016. [   10.092830] [OV16825]CSI_SUBDEV_PWR_ON!
  1017. [   10.098245] register fd_early_suspend @ probe handle!
  1018. [   10.103882] [VFE]mclk on
  1019. [   10.106705] [fd]: install end!!!
  1020. [   10.117142] [VFE_WARN]os_gpio_write, hdl is NULL
  1021. [   10.159061] init: /dev/hw_random not found
  1022. [   10.171512] [OV16825]sensor_init
  1023. [   10.175249] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
  1024. [   10.187232] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
  1025. [   10.187506] binder: 1490:1490 transaction failed 29189, size 0-0
  1026. [   10.201735] [VFE CCI ERR] Status error at addr_8bit = 6c, wr_flag = 1!
  1027. [   10.206420] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  1028. [   10.218681] [OV16825]sensor read retry=2
  1029. [   10.223169] [OV16825]error at sensor_detect
  1030. [   10.228039] [OV16825]chip found is not an target chip.
  1031. [   10.233886] [OV16825]CSI_SUBDEV_PWR_OFF!
  1032. [   10.238392] [VFE]mclk off
  1033. [   10.241477] [VFE_WARN]os_gpio_write, hdl is NULL
  1034. [   10.257289] [VFE_WARN]os_gpio_write, hdl is NULL
  1035. [   10.275019] [VFE]vfe sensor subdev unregister!
  1036. [   10.280372] [VFE]Sub device register "ov16825" failed!
  1037. [   10.287578] [VFE_ERR]vfe sensor register check error at input_num = 0
  1038. [   10.294975] [VFE]read ini start
  1039. [   10.299021] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_test_param.ini"
  1040. [   10.366767] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_3a_param.ini"
  1041. [   10.421450] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_iso_param.ini"
  1042. [   10.466584] keyname:ctp_para  subname:ctp_power_ldo ,get error!
  1043. [   10.474841] keyname:ctp_para  subname:ctp_power_ldo_vol ,get error!
  1044. [   10.487239] keyname:ctp_para  subname:ctp_power_io ,get error!
  1045. [   10.493988] keyname:ctp_para  subname:ctp_wakeup ,get error!
  1046. [   10.500593] get sysconfig para erro!
  1047. [   10.504727] get_device_para_value:get subname:stk3x1x error! val.val:0
  1048. [   10.512213] get_detect_list: script_get_item err.support_number = 3.
  1049. [   10.519800] get_device_para_value:get subname:jsa1127 error! val.val:0
  1050. [   10.527235] get_detect_list: script_get_item err.support_number = 2.
  1051. [   10.534695] get_device_para_value:get subname:jsa1212 error! val.val:0
  1052. [   10.542110] get_detect_list: script_get_item err.support_number = 1.
  1053. [   10.549378] get_device_para_value:get subname:bmg160_gyr error! val.val:0
  1054. [   10.557077] get_detect_list: script_get_item err.support_number = 1.
  1055. [   10.564303] get sysconfig para erro!
  1056. [   10.568327] ctp_wakeup: !!!!gpio data 0
  1057. [   10.574923] [VFE_WARN]fetch iso_param_30 from isp_iso_100_cfg failed, set iso_param_30 = 0!
  1058. [   10.585370] [VFE_WARN]fetch iso_param_31 from isp_iso_100_cfg failed, set iso_param_31 = 0!
  1059. [   10.594993] [VFE_WARN]fetch iso_param_32 from isp_iso_100_cfg failed, set iso_param_32 = 0!
  1060. [   10.611949] [VFE_WARN]fetch iso_param_33 from isp_iso_100_cfg failed, set iso_param_33 = 0!
  1061. [   10.621524] ir_fetch_sysconfig_para: IR power key type err!
  1062. [   10.630249] [VFE_WARN]fetch iso_param_34 from isp_iso_100_cfg failed, set iso_param_34 = 0!
  1063. [   10.630825] input: sunxi-ir as /devices/virtual/input/s_cir0
  1064. [   10.646808] [VFE_WARN]fetch iso_param_35 from isp_iso_100_cfg failed, set iso_param_35 = 0!
  1065. [   10.659038] [VFE_WARN]fetch iso_param_36 from isp_iso_100_cfg failed, set iso_param_36 = 0!
  1066. [   10.668566] [VFE_WARN]fetch iso_param_30 from isp_iso_200_cfg failed, set iso_param_30 = 0!
  1067. [   10.678098] [VFE_WARN]fetch iso_param_31 from isp_iso_200_cfg failed, set iso_param_31 = 0!
  1068. [   10.687475] [VFE_WARN]fetch iso_param_32 from isp_iso_200_cfg failed, set iso_param_32 = 0!
  1069. [   10.696834] [VFE_WARN]fetch iso_param_33 from isp_iso_200_cfg failed, set iso_param_33 = 0!
  1070. [   10.697189] get sysconfig para erro!
  1071. [   10.710628] [VFE_WARN]fetch iso_param_34 from isp_iso_200_cfg failed, set iso_param_34 = 0!
  1072. [   10.720264] [VFE_WARN]fetch iso_param_35 from isp_iso_200_cfg failed, set iso_param_35 = 0!
  1073. [   10.729940] [VFE_WARN]fetch iso_param_36 from isp_iso_200_cfg failed, set iso_param_36 = 0!
  1074. [   10.739669] [VFE_WARN]fetch iso_param_30 from isp_iso_400_cfg failed, set iso_param_30 = 0!
  1075. [   10.749135] [VFE_WARN]fetch iso_param_31 from isp_iso_400_cfg failed, set iso_param_31 = 0!
  1076. [   10.758937] [VFE_WARN]fetch iso_param_32 from isp_iso_400_cfg failed, set iso_param_32 = 0!
  1077. [   10.768376] [VFE_WARN]fetch iso_param_33 from isp_iso_400_cfg failed, set iso_param_33 = 0!
  1078. [   10.778191] [VFE_WARN]fetch iso_param_34 from isp_iso_400_cfg failed, set iso_param_34 = 0!
  1079. [   10.788538] [VFE_WARN]fetch iso_param_35 from isp_iso_400_cfg failed, set iso_param_35 = 0!
  1080. [   10.797971] [VFE_WARN]fetch iso_param_36 from isp_iso_400_cfg failed, set iso_param_36 = 0!
  1081. [   10.807400] [VFE_WARN]fetch iso_param_30 from isp_iso_800_cfg failed, set iso_param_30 = 0!
  1082. [   10.816770] [VFE_WARN]fetch iso_param_31 from isp_iso_800_cfg failed, set iso_param_31 = 0!
  1083. [   10.826105] [VFE_WARN]fetch iso_param_32 from isp_iso_800_cfg failed, set iso_param_32 = 0!
  1084. [   10.836034] [VFE_WARN]fetch iso_param_33 from isp_iso_800_cfg failed, set iso_param_33 = 0!
  1085. [   10.845433] [VFE_WARN]fetch iso_param_34 from isp_iso_800_cfg failed, set iso_param_34 = 0!
  1086. [   10.854840] [VFE_WARN]fetch iso_param_35 from isp_iso_800_cfg failed, set iso_param_35 = 0!
  1087. [   10.864246] [VFE_WARN]fetch iso_param_36 from isp_iso_800_cfg failed, set iso_param_36 = 0!
  1088. [   10.873821] [VFE_WARN]fetch iso_param_30 from isp_iso_1600_cfg failed, set iso_param_30 = 0!
  1089. [   10.883281] [VFE_WARN]fetch iso_param_31 from isp_iso_1600_cfg failed, set iso_param_31 = 0!
  1090. [   10.893369] [VFE_WARN]fetch iso_param_32 from isp_iso_1600_cfg failed, set iso_param_32 = 0!
  1091. [   10.902864] [VFE_WARN]fetch iso_param_33 from isp_iso_1600_cfg failed, set iso_param_33 = 0!
  1092. [   10.912352] [VFE_WARN]fetch iso_param_34 from isp_iso_1600_cfg failed, set iso_param_34 = 0!
  1093. [   10.921936] [VFE_WARN]fetch iso_param_35 from isp_iso_1600_cfg failed, set iso_param_35 = 0!
  1094. [   10.931472] [VFE_WARN]fetch iso_param_36 from isp_iso_1600_cfg failed, set iso_param_36 = 0!
  1095. [   10.941016] [VFE_WARN]fetch iso_param_30 from isp_iso_3200_cfg failed, set iso_param_30 = 0!
  1096. [   10.950586] [VFE_WARN]fetch iso_param_31 from isp_iso_3200_cfg failed, set iso_param_31 = 0!
  1097. [   10.960260] [VFE_WARN]fetch iso_param_32 from isp_iso_3200_cfg failed, set iso_param_32 = 0!
  1098. [   10.969789] [VFE_WARN]fetch iso_param_33 from isp_iso_3200_cfg failed, set iso_param_33 = 0!
  1099. [   10.979263] [VFE_WARN]fetch iso_param_34 from isp_iso_3200_cfg failed, set iso_param_34 = 0!
  1100. [   10.988783] [VFE_WARN]fetch iso_param_35 from isp_iso_3200_cfg failed, set iso_param_35 = 0!
  1101. [   10.998780] [VFE_WARN]fetch iso_param_36 from isp_iso_3200_cfg failed, set iso_param_36 = 0!
  1102. [   11.021979] [VFE]Fetch ini file form "/system/etc/hawkview/ov16825/isp_tuning_param.ini"
  1103. [   11.070883] [ap6xxx]: get power regulator  failed.
  1104. [   11.076212] gpio ap6xxx_wl_regon set val 1, act val 1
  1105. [   11.079283] [VFE]Fetch table form "/system/etc/hawkview/ov16825/bin/gamma_tbl.bin"
  1106. [   11.082029] [VFE]registered actuator device succeed!
  1107. [   11.083241] [VFE]V4L2 device registered as video0
  1108. [   11.083273] [VFE]register_early_suspend @ probe handle!
  1109. [   11.083281] [VFE]..........................vfe clk close!.......................
  1110. [   11.083308] [VFE]probe_work_handle end!
  1111. [   11.219369] [ap6xxx]: sdio wifi power state: on
  1112. [   11.224487] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1113. [   11.224651] =========== WLAN placed in POWER ON ========
  1114. [   11.267245] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1115. [   11.349643] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 52,  RTO !!
  1116. [   11.358690] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 52,  RTO !!
  1117. [   11.366929] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1118. [   11.379715] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1119. [   11.392626] [mmc]: *** sunxi_mci_dump_errinfo(L646): smc 1 err, cmd 8,  RTO !!
  1120. [   11.401842] *******************Try sdio*******************
  1121. [   11.408513] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  1122. [   11.437745] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  1123. [   11.445858] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1124. [   11.454227] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1125. [   11.468203] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  1126. [   11.529826] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  1127. [   11.540261] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  1128. [   11.606085] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1129. [   11.622582] mmc2: new high speed SDIO card at address 0001
  1130. [   11.633753] bcmsdh_register: Linux Kernel SDIO/MMC Driver
  1131. [   11.642126] bcm_wlan_get_oob_irq enter.
  1132. [   11.646509] gpio [355] map to virq [3] ok
  1133. [   11.659337] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
  1134. [   11.668408] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
  1135. [   11.677761] dhdsdio_probe: Disable prop_txstatus
  1136. [   11.687398] wl_create_event_handler(): thread:wl_event_handler:678 started
  1137. [   11.689849] tsk Enter, tsk = 0xe44013d8
  1138. [   11.711291] p2p0: P2P Interface Registered
  1139. [   11.715982] dhd_attach(): thread:dhd_watchdog_thread:686 started
  1140. [   11.728990] dhd_attach(): thread:dhd_dpc:688 started
  1141. [   11.735660] dhd_attach(): thread:dhd_sysioc:68e started
  1142. [   11.760389] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  1143. [   11.769943] *******************sdio init ok*******************
  1144. [   11.776518]
  1145. [   11.776522] Dongle Host Driver, version 1.88.45.3 (r420671)
  1146. [   11.776527] Compiled in drivers/net/wireless/bcmdhd on Jun 23 2014 at 17:04:09
  1147. [   11.792659] [ap6xxx]: get power regulator  failed.
  1148. [   11.798072] gpio ap6xxx_wl_regon set val 0, act val 0
  1149. [   11.903773] [ap6xxx]: sdio wifi power state: off
  1150. [   11.908948] =========== WLAN placed in RESET ========
  1151. [   11.927714] Bluetooth: MSM Sleep Mode Driver Ver 1.2
  1152. [   11.967366] usbcore: registered new interface driver asix
  1153. [   11.984956] usbcore: registered new interface driver qf9700
  1154. [   12.006918] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  1155. [   12.033158] usbcore: registered new interface driver rtl8150
  1156. [   12.053503] usbcore: registered new interface driver cdc_ether
  1157. [   12.085379] eth0: Use random mac address
  1158. [   12.186073] 0xf6000008 = 0x8104361c, line:322, freq:22579200
  1159. [   12.195991] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  1160. [   12.205418] init: powerctl: cannot expand '${sys.powerctl}'
  1161. [   12.212071] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  1162. [   12.226224] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  1163. [   12.231127] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  1164. [   12.247592] android_usb: already disabled
  1165. [   12.252289] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  1166. [   12.263403] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  1167. [   12.265901] adb_open
  1168. [   12.266525] mtp_bind_config
  1169. [   12.266538] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
  1170. [   12.266545] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
  1171. [   12.266584] adb_bind_config
  1172. [   12.266589] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
  1173. [   12.266595] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
  1174. [   12.266602] ep_matches, wrn: endpoint already claimed, ep(0xe609f5c0, 0xe6134000, ep2in)
  1175. [   12.266608] ep_matches, wrn: endpoint already claimed, ep(0xe609f740, 0xe6134000, ep1out)
  1176. [   12.266614] ep_matches, wrn: endpoint already claimed, ep(0xe609f6c0, 0xe6134000, ep1in)
  1177. shell@kylin-optimus:/ $ [   12.968225] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  1178. [   16.649587] rtc_settime(239): time to set 1970-1-2 0:0:0
  1179. [   16.685853] rtc_settime(283): set time 1970-1-2 0:0:0 success!
  1180. [   16.692731] rtc_gettime(323): read time 1970-1-2 0:0:0
  1181. [   19.705388] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
  1182. [   19.714717] request_suspend_state: wakeup (3->0) at 19687612509 (1970-01-02 00:00:03.065149168 UTC)
  1183. [   19.832315] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  1184. [   19.840334] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  1185. [   19.846377] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  1186. [   19.852527] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  1187. [   19.858773] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  1188. [   19.865008] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  1189. [   19.871270] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  1190. [   20.130835] gmac0: probed
  1191. [   20.133852] gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00)
  1192. [   20.282309] acc_open
  1193. [   20.288431] acc_release
  1194. [   20.463262] warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
  1195. [   20.836096] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
  1196. [   20.846243]
  1197. [   20.846246] Dongle Host Driver, version 1.88.45.3 (r420671)
  1198. [   20.846249] Compiled in drivers/net/wireless/bcmdhd on Jun 23 2014 at 17:04:09
  1199. [   20.862228] wl_android_wifi_on in 1
  1200. [   20.866128] wl_android_wifi_on in 2: g_wifi_on=0
  1201. [   20.871335] [ap6xxx]: get power regulator  failed.
  1202. [   20.876692] gpio ap6xxx_wl_regon set val 1, act val 1
  1203. [   20.982670] [ap6xxx]: sdio wifi power state: on
  1204. [   20.987968] =========== WLAN going back to live  ========
  1205. [   20.994004] sdio_reset_comm():
  1206. [   20.997432] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1207. [   21.009863] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1208. [   21.021250] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1209. [   21.087053] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1210. [   21.123307] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  1211. [   21.132097] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1212. [   21.140513] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1213. [   21.150515] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  1214. [   21.220776] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1215. [   21.231126] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1216. [   21.297452] [mmc]: sdc1 set ios: clk 48000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  1217. [   21.308581]
  1218. [   21.308585]
  1219. [   21.308587] dhd_bus_devreset: == WLAN ON ==
  1220. [   21.316681] dhd_bus_devreset called when dongle is not in reset
  1221. [   21.324000] Will call dhd_bus_start instead
  1222. [   21.329106] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
  1223. [   21.339822] dhd_conf_download_config: Ignore config file /system/vendor/modules/config.txt
  1224. [   21.349286] Final fw_path=/system/vendor/modules/fw_bcm40183b2_ag.bin
  1225. [   21.356722] Final nv_path=/system/vendor/modules/nvram_ap6330.txt
  1226. [   21.363584] Final conf_path=/system/vendor/modules/config.txt
  1227. [   21.445302] NVRAM version: AP6330_NVRAM_V1.0_20121130
  1228.  
  1229. [   21.452125] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1230. [   21.637020] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1231. [   21.644312] bcmsdh_set_drvdata: Enter
  1232. [   21.648559] bcmsdh_register_oob_intr: Enter
  1233. [   21.653374] bcmsdh_register_oob_intr: IRQ=3 Type=414
  1234. [   21.659347]
  1235. [   21.659352] bcmdhd wakeup 0
  1236. [   21.666569] dhd_conf_set_band: Set band 0
  1237. [   21.674277] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=98:3b:16:b7:0c:f6
  1238. [   21.683821] dhd_conf_set_country: Set country ALL, revision 0
  1239. [   21.758946] Country code: ALL (ALL/0)
  1240. [   21.763721] dhd_conf_set_roam: Set roam_off 1
  1241. [   21.772480] dhd_preinit_ioctls buf_key_b4_m4 set failed -23
  1242. [   21.788201] Firmware version = wl0: Jan  6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
  1243. [   21.798150]   Driver: 1.88.45.3 (r420671)
  1244. [   21.798159]   Firmware: wl0: Jan  6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5
  1245. [   21.815225] wl_android_wifi_on: Success
  1246. [   21.821581] wl_cfg80211_attach_post: p2p0 p2p_dev_addr=9a:3b:16:b7:0c:f6
  1247. [   21.829881] dhd_rx_frame: net device is NOT registered yet. drop packet
  1248. [   23.586251] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
  1249. [   23.587064] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
  1250. [   23.637828] PVR_K:(Warn):  1749: DestroyHandleBase: Handles still exist (14 found) [0, ]
  1251. [   24.708996] [rfkill]: rfkill set power 1
  1252. [   24.727280] gpio ap6xxx_bt_regon set val 0, act val 0
  1253. [   24.969168] [rfkill]: rfkill set power 0
  1254. [   24.973595] gpio ap6xxx_bt_regon set val 1, act val 1
  1255. [   26.326082] [BT_LPM] bluesleep_get_uart_port: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: uart, port irq: 34
  1256. [   27.351194] CPU7: shutdown
  1257. [   27.851330] CPU6: shutdown
  1258. [   29.353699] CPU5: shutdown
  1259. [   29.854679] CPU3: shutdown
  1260. [   30.343742] CPU2: shutdown
  1261. [   30.547136] eth0: no IPv6 routers present
  1262. [   30.853529] CPU4: shutdown
  1263. [   32.337230] p2p0: no IPv6 routers present
  1264. [   35.855127] CPU2: Booted secondary processor
  1265. [   36.347174] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
  1266. [   36.353893] [BT_LPM] bluesleep_tx_timer_expire: Tx data during last period
  1267. [   40.864856] CPU3: Booted secondary processor
  1268. [   41.376385] CPU4: Booted secondary processor
  1269. [   42.998966] [BT_LPM] bluesleep_hostwake_task: hostwake line change
  1270. [   44.849928] CPU3: shutdown
  1271. [   45.344384] CPU2: shutdown
  1272. [   45.855362] CPU4: shutdown
  1273. [   46.367198] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
  1274. [   46.373973] [BT_LPM] bluesleep_tx_timer_expire: Tx data during last period
  1275. [   56.387220] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired
  1276. [   56.394035] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle
  1277. [   56.402288] [BT_LPM] bluesleep_sleep_work: going to sleep...
  1278. [   58.870769] CPU2: Booted secondary processor
  1279. [   61.857976] CPU3: Booted secondary processor
  1280. [   65.357274] CPU3: shutdown
  1281. [   66.356875] CPU2: shutdown
  1282. [   69.370385] CPU2: Booted secondary processor
  1283. [   69.857396] CPU3: Booted secondary processor
  1284. [   70.187565] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
  1285. [   73.353416] CPU3: shutdown
  1286. [   73.852813] CPU2: shutdown
  1287. [   76.869561] CPU2: Booted secondary processor
  1288. [   80.359793] CPU2: shutdown
  1289. [   94.866195] CPU2: Booted secondary processor
  1290. [   95.365297] CPU3: Booted secondary processor
  1291. [   98.857746] CPU3: shutdown
  1292. [   99.354477] CPU2: shutdown
  1293. [  104.869219] CPU2: Booted secondary processor
  1294. [  108.354284] CPU2: shutdown
  1295. [  118.860642] CPU2: Booted secondary processor
  1296. [  120.854262] CPU2: shutdown
  1297. [  127.345593] CPU2: Booted secondary processor
  1298. [  128.865516] CPU3: Booted secondary processor
  1299. [  130.190060] healthd: battery l=100 v=0 t=30.0 h=2 st=5 c=0 chg=a
  1300. [  132.352723] CPU3: shutdown
  1301. [  132.854476] CPU2: shutdown
  1302. \00
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top