Advertisement
VecH

Untitled

Jan 6th, 2016
138
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.27 KB | None | 0 0
  1. # hdparm -I /dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E0287422
  2.  
  3. /dev/disk/by-id/ata-WDC_WD40EFRX-68WT0N0_WD-WCC4E0287422:
  4.  
  5. ATA device, with non-removable media
  6. Model Number: WDC WD40EFRX-68WT0N0
  7. Serial Number: WD-WCC4E0287422
  8. Firmware Revision: 80.00A80
  9. Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  10. Standards:
  11. Supported: 9 8 7 6 5
  12. Likely used: 9
  13. Configuration:
  14. Logical max current
  15. cylinders 16383 16383
  16. heads 16 16
  17. sectors/track 63 63
  18. --
  19. CHS current addressable sectors: 16514064
  20. LBA user addressable sectors: 268435455
  21. LBA48 user addressable sectors: 7814037168
  22. Logical Sector size: 512 bytes
  23. Physical Sector size: 4096 bytes
  24. Logical Sector-0 offset: 0 bytes
  25. device size with M = 1024*1024: 3815447 MBytes
  26. device size with M = 1000*1000: 4000787 MBytes (4000 GB)
  27. cache/buffer size = unknown
  28. Nominal Media Rotation Rate: 5400
  29. Capabilities:
  30. LBA, IORDY(can be disabled)
  31. Queue depth: 32
  32. Standby timer values: spec'd by Standard, with device specific minimum
  33. R/W multiple sector transfer: Max = 16 Current = 0
  34. DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
  35. Cycle time: min=120ns recommended=120ns
  36. PIO: pio0 pio1 pio2 pio3 pio4
  37. Cycle time: no flow control=120ns IORDY flow control=120ns
  38. Commands/features:
  39. Enabled Supported:
  40. * SMART feature set
  41. Security Mode feature set
  42. * Power Management feature set
  43. * Write cache
  44. * Look-ahead
  45. * Host Protected Area feature set
  46. * WRITE_BUFFER command
  47. * READ_BUFFER command
  48. * NOP cmd
  49. * DOWNLOAD_MICROCODE
  50. Power-Up In Standby feature set
  51. * SET_FEATURES required to spinup after power up
  52. SET_MAX security extension
  53. * 48-bit Address feature set
  54. * Device Configuration Overlay feature set
  55. * Mandatory FLUSH_CACHE
  56. * FLUSH_CACHE_EXT
  57. * SMART error logging
  58. * SMART self-test
  59. Media Card Pass-Through
  60. * General Purpose Logging feature set
  61. * 64-bit World wide name
  62. * URG for READ_STREAM[_DMA]_EXT
  63. * URG for WRITE_STREAM[_DMA]_EXT
  64. * IDLE_IMMEDIATE with UNLOAD
  65. * WRITE_UNCORRECTABLE_EXT command
  66. * {READ,WRITE}_DMA_EXT_GPL commands
  67. * Segmented DOWNLOAD_MICROCODE
  68. * Gen1 signaling speed (1.5Gb/s)
  69. * Gen2 signaling speed (3.0Gb/s)
  70. * Gen3 signaling speed (6.0Gb/s)
  71. * Native Command Queueing (NCQ)
  72. * Host-initiated interface power management
  73. * Phy event counters
  74. * Idle-Unload when NCQ is active
  75. * NCQ priority information
  76. * unknown 76[15]
  77. * DMA Setup Auto-Activate optimization
  78. Device-initiated interface power management
  79. * Software settings preservation
  80. * SMART Command Transport (SCT) feature set
  81. * SCT Write Same (AC2)
  82. * SCT Error Recovery Control (AC3)
  83. * SCT Features Control (AC4)
  84. * SCT Data Tables (AC5)
  85. unknown 206[12] (vendor specific)
  86. unknown 206[13] (vendor specific)
  87. unknown 206[14] (vendor specific)
  88. Security:
  89. Master password revision code = 65534
  90. supported
  91. not enabled
  92. not locked
  93. not frozen
  94. not expired: security count
  95. supported: enhanced erase
  96. more than 508min for SECURITY ERASE UNIT. more than 508min for ENHANCED SECURITY ERASE UNIT.
  97. Logical Unit WWN Device Identifier: 50014ee2092cbeec
  98. NAA : 5
  99. IEEE OUI : 0014ee
  100. Unique ID : 2092cbeec
  101. Checksum: correct
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement