Guest User

Untitled

a guest
Nov 7th, 2017
36
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.60 KB | None | 0 0
  1.  
  2. U-Boot SPL 2017.09-dirty (Oct 14 2017 - 21:00:59)
  3. Trying to boot from MMC1
  4.  
  5.  
  6. U-Boot 2017.09-dirty (Oct 14 2017 - 21:00:59 +0530)
  7.  
  8. CPU : AM335X-GP rev 2.1
  9. I2C: ready
  10. DRAM: 512 MiB
  11. No match for driver 'omap_hsmmc'
  12. No match for driver 'omap_hsmmc'
  13. Some drivers were not found
  14. Reset Source: Power-on reset has occurred.
  15. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  16. Using default environment
  17.  
  18. Board: BeagleBone Black
  19. <ethaddr> not set. Validating first E-fuse MAC
  20. BeagleBone Black:
  21. BeagleBone: cape eeprom: i2c_probe: 0x54:
  22. BeagleBone: cape eeprom: i2c_probe: 0x55:
  23. BeagleBone: cape eeprom: i2c_probe: 0x56:
  24. BeagleBone: cape eeprom: i2c_probe: 0x57:
  25. Net: eth0: MII MODE
  26. cpsw
  27. Press SPACE to abort autoboot in 2 seconds
  28. board_name=[A335BNLT] ...
  29. board_rev=[00C0] ...
  30. switch to partitions #0, OK
  31. mmc0 is current device
  32. SD/MMC found on device 0
  33. ** Bad device 0:2 0x82000000 **
  34. ** Bad device 0:2 0x82000000 **
  35. switch to partitions #0, OK
  36. mmc0 is current device
  37. Scanning mmc 0:1...
  38. gpio: pin 56 (gpio 56) value is 0
  39. gpio: pin 55 (gpio 55) value is 0
  40. gpio: pin 54 (gpio 54) value is 0
  41. gpio: pin 53 (gpio 53) value is 1
  42. switch to partitions #0, OK
  43. mmc0 is current device
  44. gpio: pin 54 (gpio 54) value is 1
  45. Checking for: /uEnv.txt ...
  46. 112 bytes read in 9 ms (11.7 KiB/s)
  47. gpio: pin 55 (gpio 55) value is 1
  48. Loaded environment from /uEnv.txt
  49. Importing environment from mmc ...
  50. Checking if uenvcmd is set ...
  51. Checking if client_ip is set ...
  52. Checking for: /boot.scr ...
  53. Checking for: /boot/boot.scr ...
  54. Checking for: /boot/uEnv.txt ...
  55. gpio: pin 55 (gpio 55) value is 1
  56. 124 bytes read in 17 ms (6.8 KiB/s)
  57. Loaded environment from /boot/uEnv.txt
  58. Checking if uname_r is set in /boot/uEnv.txt...
  59. gpio: pin 56 (gpio 56) value is 1
  60. Running uname_boot ...
  61. loading /boot/vmlinuz-4.4.92-bone-rt-r19 ...
  62. 7528064 bytes read in 676 ms (10.6 MiB/s)
  63. loading /boot/dtbs/4.4.92-bone-rt-r19/am335x-boneblack.dtb ...
  64. 51307 bytes read in 69 ms (725.6 KiB/s)
  65. uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable...
  66. debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M quiet cape_universal=enable optargs=capemgr.enable_partno=BB-I2C2-ADXL] ...
  67. debug: [bootz 0x82000000 - 0x88000000] ...
  68. ## Flattened Device Tree blob at 88000000
  69. Booting using the fdt blob at 0x88000000
  70. Loading Device Tree to 8fff0000, end 8ffff86a ... OK
  71.  
  72. Starting kernel ...
  73.  
  74. [ 0.000608] clocksource_probe: no matching clocksources found
  75. [ 3.738810] omap-sham 53100000.sham: initialization failed.
  76. [ 3.753185] omap_voltage_late_init: Voltage driver support not added
  77. [ 9.950046] davinci-mcasp 48038000.mcasp: invalid tdm slots: 0
  78. [ 10.013726] davinci-mcasp 4803c000.mcasp: invalid tdm slots: 0
  79. [ *** ] (1 of 2) A start job is running for…network interfaces (48s / 5min 1s)r *** ] (1 of 2) A start job is [unning[ **] (1 of 2) A start job is running for…etwork interfaces (1min / 5min 1s)� *] (1 of 2) A start job is running[ OK ] Started Raise network interfaces.
  80. [ OK ] Reached target Network.
  81. Starting OpenBSD Secure Shell server...
  82. Starting dnsmasq - A lightweight DHCP and caching DNS server...
  83. Starting Permit User Sessions...
  84. [ OK ] Reached target Network is Online.
  85. Starting LSB: Advanced IEEE 802.11 management daemon...
  86. [ OK ] Started Permit User Sessions.
  87. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  88. [ OK ] Started Serial Getty on ttyS0.
  89. [ OK ] Started Getty on tty1.
  90. [ OK ] Reached target Login Prompts.
  91. [ OK ] Started OpenBSD Secure Shell server.
  92. [ OK ] Started dnsmasq - A lightweight DHCP and caching DNS server.
  93. [ OK ] Reached target Host and Network Name Lookups.
  94. Starting The Apache HTTP Server...
  95. [ OK ] Started Serial Getty on ttyGS0.
  96. [ OK ] Started Generic Board Startup.
  97. [ OK ] Started The Apache HTTP Server.
  98. [ OK ] Reached target Multi-User System.
  99. [ OK ] Reached target Graphical Interface.
  100. Starting Update UTMP about System Runlevel Changes...
  101. [ OK ] Started Update UTMP about System Runlevel Changes.
  102.  
  103. Debian GNU/Linux 9 arm ttyS0
  104.  
  105. default username:password is [debian:temppwd]
  106.  
  107. arm login: root
  108. Password:
  109. Last login: Sun Oct 15 18:18:30 UTC 2017 on ttyS0
  110. Linux arm 4.4.92-bone-rt-r19 #11 PREEMPT RT Sun Oct 15 21:16:33 IST 2017 armv7l
  111.  
  112. The programs included with the Debian GNU/Linux system are free software;
  113. the exact distribution terms for each program are described in the
  114. individual files in /usr/share/doc/*/copyright.
  115.  
  116. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  117. permitted by applicable law.
  118. root@arm:~#
Add Comment
Please, Sign In to add comment