Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.0.8-ge62bc21 (chaos@bamf-dev) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Apr 3 09:41:30 MST 2012
- <4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: Tuna
- <6>[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] OMAP4460 ES1.1
- <6>[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
- <6>[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
- <7>[ 0.000000] On node 0 totalpages: 182272
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c07b7c40, node_mem_map c0943000
- <7>[ 0.000000] Normal zone: 256 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
- <7>[ 0.000000] HighMem zone: 1792 pages used for memmap
- <7>[ 0.000000] HighMem zone: 147712 pages, LIFO batch:31
- <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c114a000 s6976 r8192 d13504 u32768
- <7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 180224
- <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend androidboot.serialno=0149CC380B006015 androidboot.bootloader=PRIMELC02 androidboot.baseband=L700.FC12 lcd_bootfb=0xbea70000 mms_ts.panel_id=18 androidboot.cdma=L700.FC12 androidboot.macaddr=FC:C7:34:DC:FA:37
- <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.000000] Memory: 512MB 200MB = 712MB total
- <5>[ 0.000000] Memory: 710900k/710900k available, 337676k reserved, 598016K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc004e000 ( 280 kB)
- <5>[ 0.000000] .text : 0xc004e000 - 0xc0760000 (7240 kB)
- <5>[ 0.000000] .data : 0xc0760000 - 0xc07b8740 ( 354 kB)
- <5>[ 0.000000] .bss : 0xc07b8764 - 0xc0942038 (1575 kB)
- <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:410
- <4>[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
- <6>[ 0.070404] pid_max: default: 32768 minimum: 301
- <6>[ 0.070404] Mount-cache hash table entries: 512
- <6>[ 0.070404] Initializing cgroup subsys debug
- <6>[ 0.070404] Initializing cgroup subsys cpuacct
- <6>[ 0.070404] Initializing cgroup subsys freezer
- <6>[ 0.071807] CPU: Testing write buffer coherency: ok
- <6>[ 0.072113] L310 cache controller enabled
- <6>[ 0.072113] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
- <4>[ 0.150238] CPU1: Booted secondary processor
- <6>[ 0.181457] Brought up 2 CPUs
- <6>[ 0.181518] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
- <4>[ 0.181793] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- <4>[ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- <4>[ 0.185485] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- <4>[ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- <4>[ 0.185516] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- <4>[ 0.185546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- <4>[ 0.185546] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
- <4>[ 0.185577] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- <4>[ 0.185577] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- <4>[ 0.185577] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
- <4>[ 0.193786] omap_hwmod: mcpdm: cannot be enabled (3)
- <6>[ 0.196014] print_constraints: dummy:
- <6>[ 0.196441] NET: Registered protocol family 16
- <6>[ 0.196716] GPMC revision 6.0
- <6>[ 0.196899] EMIF0 is enabled with IRQ142
- <6>[ 0.196899] EMIF1 is enabled with IRQ143
- <6>[ 0.198150] Last reset was warm software reset (PRM_RSTST=0x2)
- <6>[ 0.198150]
- <6>[ 0.198181] HSI: device registered as omap_hwmod: hsi
- <6>[ 0.198638] OMAP GPIO hardware version 0.1
- <6>[ 0.199493] omap_mux_init: Add partition: #1: core, flags: 2
- <6>[ 0.200073] omap_mux_init: Add partition: #2: wkup, flags: 2
- <6>[ 0.201446] Tuna HW revision: 1e (Toro unknown), cpu OMAP4460 ES1.1
- <6>[ 0.203796] ram_console: got buffer at a0000000, size 200000
- <6>[ 0.203796] ram_console: found existing buffer, size 25999, start 25999
- <6>[ 0.280822] console [ram-1] enabled
- <6>[ 0.280883] Using tuna_oled_factory_info_6500k
- <6>[ 0.284362] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio102
- <3>[ 0.284393] omap_mux_init_gpio: Could not set gpio102
- <6>[ 0.285125] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio101
- <3>[ 0.285125] omap_mux_init_gpio: Could not set gpio101
- <6>[ 0.478332] _omap_mux_init_gpio: Multiple gpio paths (2) for gpio100
- <3>[ 0.485137] omap_mux_init_gpio: Could not set gpio100
- <6>[ 0.490356] usb:ehci initialized
- <6>[ 0.495483] OMAP DMA hardware revision 0.0
- <4>[ 0.495483] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
- <6>[ 0.504486] bio: create slab <bio-0> at 0
- <6>[ 0.505279] print_constraints: vwl1271: 2000 mV
- <5>[ 0.506134] SCSI subsystem initialized
- <6>[ 0.507507] usbcore: registered new interface driver usbfs
- <6>[ 0.507507] usbcore: registered new interface driver hub
- <6>[ 0.508056] usbcore: registered new device driver usb
- <6>[ 0.509277] i2c-gpio i2c-gpio.5: using pins 98 (SDA) and 99 (SCL)
- <6>[ 0.525268] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
- <4>[ 0.525268] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- <6>[ 0.528869] twl6030: PIH (irq 39) chaining IRQs 368..387
- <6>[ 0.531127] print_constraints: VUSB: 3300 mV normal standby
- <6>[ 0.531707] print_constraints: VMMC: 1800 mV normal standby
- <6>[ 0.532684] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
- <6>[ 0.533142] print_constraints: VUSIM: 2200 mV normal standby
- <6>[ 0.533142] print_constraints: VCXIO: 1800 mV normal standby
- <6>[ 0.533142] print_constraints: VDAC: 1800 mV normal standby
- <6>[ 0.534973] print_constraints: VAUX1_6030: 3000 mV normal standby
- <6>[ 0.535736] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
- <6>[ 0.536407] print_constraints: VAUX3_6030: 3100 mV normal standby
- <6>[ 0.537353] print_constraints: CLK32KG:
- <6>[ 0.538269] print_constraints: CLK32KAUDIO:
- <6>[ 0.539062] print_constraints: VDD3:
- <6>[ 0.539916] print_constraints: VMEM: at 1250 mV
- <6>[ 0.540802] print_constraints: V2V1: 2100 mV normal standby
- <6>[ 0.541625] print_constraints: VANA: 2100 mV normal standby
- <6>[ 0.556518] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- <6>[ 0.572082] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
- <6>[ 0.587707] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
- <6>[ 0.589111] omap-rproc omap-rproc.0: dsp is available
- <6>[ 0.589111] omap-rproc omap-rproc.1: ipu is available
- <6>[ 0.589111] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.589111] Bluetooth: Core ver 2.16
- <6>[ 0.589111] NET: Registered protocol family 31
- <6>[ 0.589111] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.589111] Bluetooth: HCI socket layer initialized
- <6>[ 0.591003] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.591003] Bluetooth: SCO socket layer initialized
- <6>[ 0.591735] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.592041] Switching to clocksource 32k_counter
- <6>[ 0.594146] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
- <7>[ 0.594635] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 0.594970] musb-hdrc: MHDRC RTL version 2.0
- <7>[ 0.594970] musb-hdrc: setup fifo_mode 4
- <7>[ 0.595275] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 0.595520] Switched to NOHz mode on CPU #0
- <6>[ 0.595550] Switched to NOHz mode on CPU #1
- <6>[ 0.595825] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- <6>[ 0.596435] NET: Registered protocol family 2
- <6>[ 0.596435] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.596435] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.596435] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- <6>[ 0.596435] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.599121] TCP reno registered
- <6>[ 0.599121] UDP hash table entries: 128 (order: 0, 4096 bytes)
- <6>[ 0.599121] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- <6>[ 0.599121] NET: Registered protocol family 1
- <6>[ 0.600463] Trying to unpack rootfs image as initramfs...
- <6>[ 0.625823] Freeing initrd memory: 316K
- <6>[ 1.745849] console [ttyFIQ0] enabled
- <6>[ 1.746185] Registered FIQ tty driver c78c2c00
- <6>[ 1.747955] omap-iommu omap-iommu.0: ducati registered
- <6>[ 1.748138] omap-iommu omap-iommu.1: tesla registered
- <4>[ 1.755645] highmem bounce pool size: 64 pages
- <6>[ 1.755950] ashmem: initialized
- <6>[ 1.766204] fuse init (API version 7.16)
- <6>[ 1.766662] msgmni has been set to 221
- <6>[ 1.766998] Registering char device tf_driver (122:0)
- <6>[ 1.769073] io scheduler noop registered
- <6>[ 1.769256] io scheduler deadline registered (default)
- <6>[ 1.769439] io scheduler cfq registered
- <6>[ 1.770355] OMAP DSS rev 4.0
- <6>[ 1.773620] dsscomp: initializing.
- <7>[ 1.773742] misc dsscomp: display0=s6e8aa0
- <7>[ 1.773864] misc dsscomp: display1=hdmi_panel
- <6>[ 1.774047] misc dsscomp: found 2 displays and 4 overlays
- <3>[ 1.774383] could not allocate slot
- <6>[ 1.775268] omap-rproc omap-rproc.1: powering up ipu
- <6>[ 1.775787] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
- <6>[ 1.776428] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
- <6>[ 1.777343] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- <6>[ 1.803375] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- <6>[ 1.842773] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- <6>[ 1.936584] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
- <6>[ 1.936584] omap_ion_probe: adding heap tiler of type 4 with ae900000@5100000
- <6>[ 1.936584] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ada00000@f00000
- <6>[ 1.937255] PVR: PVRCore_Init
- <6>[ 1.937622] PVR: PVRSRVDriverProbe(pDevice=c78b3200)
- <6>[ 1.937988] PVR: SGX register base: 0x56000000
- <6>[ 1.938110] PVR: SGX register size: 65535
- <6>[ 1.938110] PVR: SGX IRQ: 53
- <6>[ 1.938110] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[ 1.938659] PVR: PVRCore_Init: major device 250
- <6>[ 1.943939] brd: module loaded
- <6>[ 1.943939] loop: module loaded
- <6>[ 1.950836] input: barometer as /devices/virtual/input/input0
- <6>[ 1.951049] sec_jack_probe : Registering jack driver
- <6>[ 1.952148] i2c i2c-4: mpu_probe: 0
- <6>[ 1.978454] i2c i2c-4: Installing irq using 205
- <6>[ 1.978454] i2c i2c-4: Module Param interface = mpuirq
- <4>[ 1.978454] i2c-core: driver [mpu3050] using legacy suspend method
- <4>[ 1.978454] i2c-core: driver [mpu3050] using legacy resume method
- <6>[ 1.978454] mpu_init: Probe name mpu3050
- <6>[ 1.979400] i2c i2c-4: bma250_mod_probe: bma250
- <6>[ 1.979827] i2c i2c-4: Installing Accel irq using 282
- <6>[ 1.990997] i2c i2c-4: mpu3050: +bma250
- <6>[ 1.990997] bma250_mod_init: Probe name bma250_mod
- <6>[ 1.991302] i2c i2c-4: yas530_mod_probe: yas530
- <6>[ 1.991302] i2c i2c-4: Installing Compass irq using 336
- <6>[ 2.012145] i2c i2c-4: mpu3050: +yas530
- <6>[ 2.012145] yas530_mod_init: Probe name yas530_mod
- <6>[ 2.012969] lte_modem_bootloader successfully probed
- <6>[ 2.019104] omap_temp_sensor omap_temp_sensor.0: omap_temp_sensor probed
- <6>[ 2.023681] m25p80 spi3.0: w25q80 (1024 Kbytes)
- <6>[ 2.024932] PPP generic driver version 2.4.2
- <6>[ 2.024932] PPP Deflate Compression module registered
- <6>[ 2.025390] PPP BSD Compression module registered
- <6>[ 2.026336] PPP MPPE Compression module registered
- <6>[ 2.026458] NET: Registered protocol family 24
- <6>[ 2.028533] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 2.028533] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 2.028533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 3.029876] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- <6>[ 3.029876] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- <6>[ 3.030120] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
- <6>[ 3.045532] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- <6>[ 3.045532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 3.045959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 3.045959] usb usb1: Product: OMAP-EHCI Host Controller
- <6>[ 3.046081] usb usb1: Manufacturer: Linux 3.0.8-ge62bc21 ehci_hcd
- <6>[ 3.046081] usb usb1: SerialNumber: ehci-omap.0
- <6>[ 3.046081] hub 1-0:1.0: USB hub found
- <6>[ 3.046081] hub 1-0:1.0: 3 ports detected
- <6>[ 3.082336] usbcore: registered new interface driver cdc_acm
- <6>[ 3.082336] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 3.082336] Initializing USB Mass Storage driver...
- <6>[ 3.082336] usbcore: registered new interface driver usb-storage
- <6>[ 3.082336] USB Mass Storage support registered.
- <6>[ 3.083557] usbcore: registered new interface driver usbserial
- <6>[ 3.083557] usbserial: USB Serial Driver core
- <6>[ 3.285156] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 3.285156] android_usb gadget: Number of LUNs=1
- <6>[ 3.285461] lun0: LUN: removable file: (no medium)
- <6>[ 3.285858] android_usb gadget: android_usb ready
- <6>[ 3.285858] musb-hdrc musb-hdrc: MUSB HDRC host driver
- <6>[ 3.286071] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
- <6>[ 3.286468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 3.286468] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 3.286773] usb usb2: Product: MUSB HDRC host driver
- <6>[ 3.286773] usb usb2: Manufacturer: Linux 3.0.8-ge62bc21 musb-hcd
- <6>[ 3.287078] usb usb2: SerialNumber: musb-hdrc
- <6>[ 3.287689] hub 2-0:1.0: USB hub found
- <6>[ 3.287719] hub 2-0:1.0: 1 port detected
- <6>[ 3.287963] usbcore: registered new interface driver xpad
- <6>[ 3.288940] usbcore: registered new interface driver usb_acecad
- <6>[ 3.288940] acecad: v3.2:USB Acecad Flair tablet driver
- <6>[ 3.289306] usbcore: registered new interface driver aiptek
- <6>[ 3.289306] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>[ 3.289611] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>[ 3.289611] usbcore: registered new interface driver gtco
- <4>[ 3.289611] GTCO usb driver version: 2.00.0006
- <6>[ 3.290130] usbcore: registered new interface driver hanwang
- <6>[ 3.290130] usbcore: registered new interface driver kbtab
- <6>[ 3.290557] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>[ 3.290557] usbcore: registered new interface driver wacom
- <6>[ 3.290557] wacom: v1.52:USB Wacom tablet driver
- <6>[ 3.291503] input: Melfas MMSxxx Touchscreen as /devices/platform/omap/omap_i2c.3/i2c-3/3-0048/input/input1
- <6>[ 3.780181] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- <6>[ 3.780548] GPIO Input Driver: Start gpio inputs for tuna-gpio-keypad in interrupt mode
- <6>[ 3.780792] input: tuna-gpio-keypad as /devices/virtual/input/input2
- <6>[ 3.781799] input: proximity as /devices/virtual/input/input3
- <6>[ 3.782531] input: lightsensor-level as /devices/virtual/input/input4
- <6>[ 3.786010] twl_rtc_read_alarm(): 2012-04-22 03:05:40 on
- <6>[ 3.786010] using rtc device, twl_rtc, for alarms
- <6>[ 3.786010] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>[ 3.787139] i2c /dev entries driver
- <6>[ 3.787658] dmm: probe base: fd300000, irq 145
- <6>[ 3.791381] max17040 4-0036: MAX17040 Fuel-Gauge Ver 3
- <6>[ 3.793823] OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec
- <6>[ 3.796691] device-mapper: uevent: version 1.0.3
- <6>[ 3.797241] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 3.797454] Bluetooth: HCI UART driver ver 2.2
- <6>[ 3.797576] Bluetooth: HCI H4 protocol initialized
- <6>[ 3.797912] cpuidle: using governor ladder
- <6>[ 3.798034] cpuidle: using governor menu
- <6>[ 3.805847] usbcore: registered new interface driver usbhid
- <6>[ 3.806030] usbhid: USB HID core driver
- <6>[ 3.806518] logger: created 256K log 'log_main'
- <6>[ 3.806823] logger: created 256K log 'log_events'
- <6>[ 3.807006] logger: created 256K log 'log_radio'
- <6>[ 3.807281] logger: created 256K log 'log_system'
- <6>[ 3.809204] OMAP HSI: HSI driver version 0.4.2
- <6>[ 3.809478] omap_hsi omap_hsi.0: Registering IRQ mpu_p1 (99)
- <6>[ 3.809692] omap_hsi omap_hsi.0: HSI port 1 initialized
- <6>[ 3.809814] omap_hsi omap_hsi.0: Registering IRQ mpu_dma (103)
- <6>[ 3.810150] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
- <4>[ 3.812652] omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
- <6>[ 3.816864] SDP4430 SoC init
- <6>[ 3.850524] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- <6>[ 3.851959] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- <6>[ 3.853790] asoc: null-codec-dai <-> Voice mapping ok
- <6>[ 3.855255] asoc: null-codec-dai <-> Tones mapping ok
- <6>[ 3.856689] asoc: null-codec-dai <-> Vibra mapping ok
- <6>[ 3.857696] asoc: null-codec-dai <-> MODEM mapping ok
- <6>[ 3.858642] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- <6>[ 3.860443] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 3.861785] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- <6>[ 3.863189] asoc: dit-hifi <-> omap-mcasp-dai mapping ok
- <4>[ 3.865447] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
- <6>[ 3.866577] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- <6>[ 3.867553] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- <6>[ 3.868591] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- <6>[ 3.869537] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- <6>[ 3.870574] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[ 3.871582] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[ 3.872650] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 3.873687] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- <6>[ 3.875640] input: Tuna Headset Jack as /devices/platform/soc-audio/sound/card0/input5
- <6>[ 3.878540] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
- <6>[ 3.879211] ALSA device list:
- <6>[ 3.879302] #0: TI OMAP4 Board
- <6>[ 3.879425] #1: OMAP4HDMI
- <6>[ 3.879608] oprofile: hardware counters not available
- <6>[ 3.879699] oprofile: using timer interrupt.
- <6>[ 3.879943] GACT probability NOT on
- <6>[ 3.880126] Mirror/redirect action on
- <6>[ 3.880218] u32 classifier
- <6>[ 3.880340] Actions configured
- <6>[ 3.880523] Netfilter messages via NETLINK v0.30.
- <6>[ 3.880706] nf_conntrack version 0.5.0 (11112 buckets, 44448 max)
- <6>[ 3.882080] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 3.882232] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 3.882415] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 3.882843] xt_time: kernel timezone is -0000
- <6>[ 3.885345] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 3.885711] arp_tables: (C) 2002 David S. Miller
- <6>[ 3.885894] TCP cubic registered
- <6>[ 3.887084] NET: Registered protocol family 10
- <6>[ 3.893493] Mobile IPv6
- <6>[ 3.893646] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 3.894195] IPv6 over IPv4 tunneling driver
- <6>[ 3.900665] NET: Registered protocol family 17
- <6>[ 3.900909] NET: Registered protocol family 15
- <5>[ 3.901245] Bridge firewalling registered
- <6>[ 3.901489] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 3.901702] Bluetooth: RFCOMM socket layer initialized
- <6>[ 3.901794] Bluetooth: RFCOMM ver 1.11
- <6>[ 3.901916] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 3.902099] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 3.902374] NET: Registered protocol family 35
- <6>[ 3.902862] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <6>[ 3.903167] ThumbEE CPU extension supported.
- <5>[ 3.903289] Registering SWP/SWPB emulation handler
- <6>[ 3.910461] Reprogramming LPDDR2 timings to 400000000 Hz
- <3>[ 3.911437] Power Management for TI OMAP4.
- <6>[ 3.911651] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
- <4>[ 3.912597] sr_init: No PMIC hook to init smartreflex
- <6>[ 3.912902] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>[ 3.913238] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>[ 3.913513] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- <6>[ 3.913757] sr_class1p5_driver_init: OMAP4460: add 10mV margin for class 1.5
- <6>[ 3.914062] SmartReflex class 1.5 driver: initialized (86400000ms)
- <6>[ 3.930175] mmc0: new high speed MMC card at address 0001
- <6>[ 3.930664] mmcblk0: mmc0:0001 SEM32G 29.7 GiB
- <6>[ 3.930877] mmcblk0boot0: mmc0:0001 SEM32G partition 1 2.00 MiB
- <6>[ 3.931091] mmcblk0boot1: mmc0:0001 SEM32G partition 2 2.00 MiB
- <6>[ 3.937133] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
- <6>[ 3.941772] mmcblk0boot1: unknown partition table
- <6>[ 3.942993] mmcblk0boot0: unknown partition table
- <6>[ 3.944061] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1203000 Calib=1020000
- <6>[ 3.944335] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1140000 Calib=974860
- <6>[ 3.944610] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000 Calib=1025500
- <6>[ 3.990905] max17040 4-0036: online = 1 vcell = 4173750 soc = 100 status = 4 health = 1 temp = 350 charger status = 1
- <6>[ 4.007141] phone_active_irq_handler : phone_state=0
- <6>[ 4.040557] usbcore: registered new interface driver if_usb_driver
- <6>[ 4.043487] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
- <6>[ 4.043579] phone_active_irq_handler : phone_state=0
- <6>[ 4.043640] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
- <6>[ 4.043762] phone_active_irq_handler : phone_state=0
- <6>[ 4.044677] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
- <6>[ 4.044799] phone_active_irq_handler : phone_state=0
- <6>[ 4.054565] clock: disabling unused clocks to save power
- <6>[ 4.073760] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
- <6>[ 4.073883] phone_active_irq_handler : phone_state=0
- <4>[ 4.201812] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=17
- <6>[ 4.202270] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000 Calib=848260
- <4>[ 4.202636] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=18
- <6>[ 4.203063] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000 Calib=840000
- <6>[ 4.384277] cannot apply mgr(lcd) on inactive device
- <4>[ 4.384704] omapfb omapfb: failed to apply dispc config
- <6>[ 4.384948] cannot apply mgr(tv) on inactive device
- <4>[ 4.385375] omapfb omapfb: failed to apply dispc config
- <6>[ 4.385620] cannot apply mgr(lcd2) on inactive device
- <4>[ 4.386047] omapfb omapfb: failed to apply dispc config
- <6>[ 4.390289] regulator_init_complete: VDAC: disabling
- <6>[ 4.392211] regulator_init_complete: VUSB: disabling
- <7>[ 4.393035] omaplfb OMAPLFBInitFBDev: Device 0: Requesting 4 TILER 2D framebuffers
- <4>[ 4.394653] ## wifi_probe
- <4>[ 4.394836] wifi_set_power = 1
- <4>[ 4.912750] wifi_set_carddetect = 1
- <4>[ 4.921051]
- <4>[ 4.921051] Dongle Host Driver, version 5.90.125.94
- <4>[ 4.921081] Compiled in drivers/net/wireless/bcmdhd on Apr 3 2012 at 09:40:44
- <6>[ 5.031524] mmc1: new high speed SDIO card at address 0001
- <4>[ 5.033294] F1 signature read @0x18000000=0x16444330
- <4>[ 5.042907] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[ 5.044311] wl_create_event_handler thr:5a started
- <4>[ 5.045166] dhd_attach thr:5b started
- <4>[ 5.045593] dhd_attach thr:5c started
- <4>[ 5.045898] dhd_attach thr:5d started
- <4>[ 5.046325] wifi_get_mac_addr
- <4>[ 5.056701] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <4>[ 5.056915] wifi_set_power = 0
- <3>[ 5.147705] Invalid Device Structure
- <4>[ 5.576812] =========== WLAN placed in RESET ========
- <6>[ 5.578491] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral'
- <6>[ 5.581390] twl_rtc twl_rtc: setting system clock to 2012-04-22 04:39:50 UTC (1335069590)
- <6>[ 5.583526] Freeing init memory: 280K
- <4>[ 5.590698] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <6>[ 5.600311] max17040 4-0036: online = 1 vcell = 4163750 soc = 100 status = 4 health = 1 temp = 350 charger status = 1
- <6>[ 5.631591] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1380000 Calib=1210000
- <6>[ 5.832000] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 5.914520] mms_ts 3-0048: fw version 0x65 already present
- <6>[ 5.915100] mms_ts 3-0048: Melfas MMS-series touch controller initialized
- <6>[ 6.457000] EXT4-fs (mmcblk0p12): recovery complete
- <6>[ 6.474975] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 6.548645] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 4511300
- <6>[ 6.549011] omap-rproc omap-rproc.1: BIOS image version is 2
- <6>[ 6.554046] EXT4-fs (mmcblk0p11): recovery complete
- <6>[ 6.555755] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic
- <6>[ 6.568878] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 6.573211] omap-iommu omap-iommu.0: iommu_get: ducati qos_request
- <4>[ 6.590484] omap_hwmod: ipu: failed to hardreset
- <6>[ 6.591461] HDCP: loaded keys
- <6>[ 6.591552] omap-iommu omap-iommu.0: ducati: version 2.1
- <6>[ 6.594940] max17040 4-0036: online = 1 vcell = 4161250 soc = 100 status = 1 health = 1 temp = 350 charger status = 1
- <6>[ 6.597259] omap-rproc omap-rproc.1: remote processor ipu is now up
- <6>[ 6.610656] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[ 6.610748] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[ 6.610809] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[ 6.610931] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[ 6.611053] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32
- <3>[ 6.614288] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- <6>[ 6.616302] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33
- <6>[ 6.616638] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c
- <6>[ 6.617187] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
- <3>[ 6.649841] init: cannot find '/system/xbin/busybox', disabling 'userinit'
- <3>[ 6.651763] android_usb: already disabled
- <6>[ 6.652526] mtp_bind_config
- <6>[ 6.652770] adb_bind_config
- <6>[ 6.657867] adb_open
- <6>[ 6.932586] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[ 6.941284] PVR: Installing MISR with cookie c08300d4
- <6>[ 6.941833] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie c79ba900
- <6>[ 6.941986] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from c8be0000
- <6>[ 6.942169] PVR: SysFinalise: Version string: SGX revision = 1.2.0
- <6>[ 7.127349] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 7.132080] android_work: sent uevent USB_STATE=DISCONNECTED
- <6>[ 7.218902] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 7.219970] android_usb gadget: high speed config #1: android
- <6>[ 7.220153] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 7.519378] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c
- <6>[ 7.519836] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
- <4>[ 7.754302] misc dsscomp: [c733a400] ignoring set failure -22
- <6>[ 7.991180] s6e8aa: d/b 1, p 1, b-01390ffb
- <6>[ 7.991180] s6e8aa: c0, 1, b-002cc162, got v 3464223, factory wants 3458853
- <6>[ 7.991180] s6e8aa: c1, 1, b-0091f4b9, got v 3675561, factory wants 3666771
- <6>[ 7.991180] s6e8aa: c2, 1, b-00252f9f, got v 3433876, factory wants 3428352
- <6>[ 7.991210] s6e8aa: d/b 1, p 2, b-044d7cf9
- <6>[ 7.991210] s6e8aa: c0, 2, b-00dfcadd, got v 3319402, factory wants 3312307
- <6>[ 7.991210] s6e8aa: c1, 2, b-01c632eb, got v 3524409, factory wants 3514465
- <6>[ 7.991210] s6e8aa: c2, 2, b-00c739ab, got v 3274702, factory wants 3266661
- <6>[ 7.991241] s6e8aa: d/b 1, p 3, b-0b323808
- <6>[ 7.991241] s6e8aa: c0, 3, b-029dd3b7, got v 3191845, factory wants 3182382
- <6>[ 7.991241] s6e8aa: c1, 3, b-03f4488e, got v 3401070, factory wants 3389907
- <6>[ 7.991241] s6e8aa: c2, 3, b-0257722c, got v 3134559, factory wants 3124725
- <6>[ 7.991271] s6e8aa: d/b 1, p 4, b-186611f4
- <6>[ 7.991271] s6e8aa: c0, 4, b-06580240, got v 3060786, factory wants 3048878
- <6>[ 7.991271] s6e8aa: c1, 4, b-08b4a36e, got v 3259436, factory wants 3245414
- <6>[ 7.991271] s6e8aa: c2, 4, b-05b6f3d5, got v 2989399, factory wants 2977003
- <6>[ 7.991302] s6e8aa: d/b 1, p 5, b-6840e4ff
- <6>[ 7.991302] s6e8aa: c0, 5, b-20529566, got v 2703626, factory wants 2683788
- <6>[ 7.991302] s6e8aa: c1, 5, b-2716d71e, got v 2889105, factory wants 2867429
- <6>[ 7.991302] s6e8aa: c2, 5, b-1c94307b, got v 2603228, factory wants 2581008
- <6>[ 7.991333] s6e8aa: d/b 1, p 6, b-ffffffff
- <6>[ 7.991333] s6e8aa: c0, 6, b-557ade51, got v 2348399, factory wants 2315333
- <6>[ 7.991333] s6e8aa: c1, 6, b-6515c963, got v 2512801, factory wants 2476333
- <6>[ 7.991333] s6e8aa: c2, 6, b-4dd86e3d, got v 2204463, factory wants 2169667
- <6>[ 8.289489] [MODEM_IF] misc_open : lte_boot0
- <6>[ 8.289550] [MODEM_IF] cmc221_on()
- <6>[ 8.819030] [MODEM_IF] misc_release : lte_boot0
- <6>[ 9.600311] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1250000 Calib=1025500
- <6>[ 9.978393] [MODEM_IF] misc_open : lte_boot0
- <6>[ 9.979522] lte_modem_spi spi4.0: IOCTL_LTE_MODEM_XMIT_BOOT - bin size: 2428
- <3>[ 10.037994] hub 1-0:1.0: unable to enumerate USB device on port 1
- <6>[ 10.840881] lte_modem_spi spi4.0: IOCTL_LTE_MODEM_XMIT_BOOT - bin size: 64288
- <3>[ 11.462524] lte_modem_spi spi4.0: spi_xmit - error -22
- <6>[ 11.462646] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.462768] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.562927] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.563018] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.663208] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.663299] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.763488] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.763580] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.795562] usb 1-1: new high speed USB device number 3 using ehci-omap
- <6>[ 11.863739] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.863830] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.964080] [MODEM_IF] misc_open : lte_boot0
- <6>[ 11.964202] [MODEM_IF] misc_release : lte_boot0
- <6>[ 11.976501] usb 1-1: New USB device found, idVendor=04e8, idProduct=6999
- <6>[ 11.976623] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- <6>[ 11.986450] if_usb_probe: probe dev_id=0 usb_device_id(0xc079bde0), usb_ld (0xc7209c00)
- <6>[ 11.986572] usb 1-1: USB IF USB device found
- <6>[ 11.986938] [MODEM_IF] lte_ipc0 state changed: LOADER_DONE
- <6>[ 12.064483] [MODEM_IF] misc_open : lte_boot0
- <6>[ 12.064605] [MODEM_IF] misc_release : lte_boot0
- <6>[ 13.534729] [MODEM_IF] misc_release : lte_boot0
- <6>[ 13.559539] [MODEM_IF] misc_open : cdma_ipc0
- <6>[ 13.559631] [MODEM_IF] misc_open : lte_ipc0
- <6>[ 13.559692] [MODEM_IF] misc_open : lte_rfs0
- <6>[ 13.560028] [MODEM_IF] cbp71_off()
- <6>[ 13.560089] [MODEM_IF] cdma_ipc0 state changed: OFFLINE
- <3>[ 14.018096] hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
- <6>[ 14.018218] usb 1-1: USB disconnect, device number 3
- <6>[ 14.295562] usb 1-1: new high speed USB device number 4 using ehci-omap
- <6>[ 14.462188] usb 1-1: New USB device found, idVendor=04e8, idProduct=6999
- <6>[ 14.462310] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- <6>[ 14.466461] if_usb_probe: probe dev_id=0 usb_device_id(0xc079bde0), usb_ld (0xc7209c00)
- <6>[ 14.466552] usb 1-1: USB IF USB device found
- <6>[ 14.467132] [MODEM_IF] lte_ipc0 state changed: ONLINE
- <6>[ 14.560272] [MODEM_IF] cbp71_on()
- <6>[ 15.475189] [MODEM_IF] cdma_ipc0 state changed: BOOTING
- <6>[ 21.002655] [MODEM_IF] cdma_ipc0 state changed: ONLINE
- <6>[ 21.007080] [MODEM_IF] misc_open : cdma_rmnet5
- <6>[ 21.007141] [MODEM_IF] misc_open : lte_rmnet4
- <3>[ 24.171783] drivers/misc/inv_mpu/mldl_cfg.c|inv_mpu_get_slave_config|1792 returning 4
- <6>[ 35.490142] request_suspend_state: wakeup (3->0) at 35483703615 (2012-04-22 04:40:20.404602052 UTC)
- <6>[ 49.888031] acc_open
- <6>[ 49.888244] acc_release
- <6>[ 53.972198] nfc_power_apply ON
- <6>[ 53.998718] nfc_power_apply OFF
- <6>[ 54.069122] nfc_power_apply ON
- <6>[ 54.212951] nfc_power_apply ON (firmware download)
- <6>[ 55.232727] mtp_open
- <6>[ 55.797973] binder: 608:616 refcount change on invalid ref 19
- <6>[ 55.798126] binder: 608:616 refcount change on invalid ref 18
- <6>[ 55.798187] binder: 608:616 refcount change on invalid ref 17
- <6>[ 55.798309] binder: 608:616 refcount change on invalid ref 16
- <6>[ 55.798431] binder: 608:616 refcount change on invalid ref 15
- <6>[ 55.798553] binder: 608:616 refcount change on invalid ref 14
- <6>[ 55.801666] binder: 608:608 refcount change on invalid ref 14
- <6>[ 55.801788] binder: 608:608 refcount change on invalid ref 14
- <6>[ 55.802062] binder: 608:608 refcount change on invalid ref 15
- <6>[ 55.802185] binder: 608:608 refcount change on invalid ref 15
- <6>[ 55.802246] binder: 608:608 refcount change on invalid ref 16
- <6>[ 55.802368] binder: 608:608 refcount change on invalid ref 16
- <6>[ 55.802429] binder: 608:608 refcount change on invalid ref 17
- <6>[ 55.802551] binder: 608:608 refcount change on invalid ref 17
- <6>[ 55.802612] binder: 608:608 refcount change on invalid ref 18
- <6>[ 55.802703] binder: 608:608 refcount change on invalid ref 18
- <6>[ 55.802764] binder: 608:608 refcount change on invalid ref 19
- <6>[ 55.802886] binder: 608:608 refcount change on invalid ref 19
- <3>[ 55.802947] binder: transaction release 9671 bad handle 14
- <3>[ 55.803070] binder: transaction release 9671 bad handle 15
- <3>[ 55.803131] binder: transaction release 9671 bad handle 16
- <3>[ 55.803222] binder: transaction release 9671 bad handle 17
- <3>[ 55.803344] binder: transaction release 9671 bad handle 18
- <3>[ 55.803436] binder: transaction release 9671 bad handle 19
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement