Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- LIVALL # setenv ext3cmd setenv bootargs root=$(ext3_root) noinitrd init=/init console=ttyS0,115200n8n SELINUX_INIT=no $(cfg_ddr) rw video=qfb: ip=none rootfstype=ext3 rootwait
- LIVALL # run ext3cmd
- LIVALL # bootm 40007fc0
- ## Booting kernel from Legacy Image at 40007fc0 ...
- Image Name: Linux-2.6.35.7
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4644960 Bytes = 4.4 MB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Initializing cgroup subsys cpu
- Linux version 2.6.35.7 (zkl@and-ser2) (gcc version 4.4.3 (GCC) ) #11220 SMP PREEMPT Tue Dec 20 10:00:59 CST 2011
- CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c57c7f
- CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: EMXX
- Memory policy: ECC disabled, Data cache writealloc
- Normal zone: 1 pages exceeds realsize 0
- Normal zone: 1 pages exceeds realsize 0
- PERCPU: Embedded 6 pages/cpu @c0660000 s3872 r8192 d12512 u65536
- pcpu-alloc: s3872 r8192 d12512 u65536 alloc=16*4096
- pcpu-alloc: [0] 0 [0] 1
- Built 2 zonelists in Zone order, mobility grouping on. Total pages: 102362
- Kernel command line: root=/dev/mmcblk0p5 noinitrd init=/init console=ttyS0,115200n8n SELINUX_INIT=no mem=147M@0x40000000 mem=256M@0x50000000 rw video=qfb: ip=none rootfstype=ext3 rootwait
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 147MB 256MB = 403MB total
- Memory: 403668k/403668k available, 9004k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
- lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .init : 0xc0008000 - 0xc0026000 ( 120 kB)
- .text : 0xc0026000 - 0xc0429000 (4108 kB)
- .data : 0xc0442000 - 0xc0476060 ( 209 kB)
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:374
- Console: colour dummy device 80x30
- Calibrating delay loop... 1061.68 BogoMIPS (lpj=5308416)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys freezer
- CPU: Testing write buffer coherency: ok
- CPU1: Booted secondary processor
- Brought up 2 CPUs
- SMP: Total of 2 processors activated (2123.36 BogoMIPS).
- NET: Registered protocol family 16
- L310 cache controller enabled
- l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x40440000
- chip revision 420
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Advanced Linux Sound Architecture Driver Version 1.0.23.
- Bluetooth: Core ver 2.15
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- cfg80211: Calling CRDA to update world regulatory domain
- Switching to clocksource sti
- NET: Registered protocol family 2
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- TCP reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- Power Management for EMXX.
- spi: registered device spi [spi]
- Starting pmu...
- ashmem: initialized
- msgmni has been set to 788
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- emxx_fb: registered device fb
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xe1020000 (irq = 40) is a TI16750
- console [ttyS0] enabled
- serial8250.0: ttyS1 at MMIO 0xe1030000 (irq = 41) is a TI16750
- serial8250.0: ttyS2 at MMIO 0xe1040000 (irq = 42) is a TI16750
- serial8250.0: ttyS3 at MMIO 0xe1050000 (irq = 43) is a TI16750
- loop: module loaded
- i2c /dev entries driver
- hdmi:IT6610 Detected
- hdmi:probe successfully!
- Linux video capture interface: v2.00
- emxx_v4l2: registered device video0 [v4l2]
- emxx_camera : "GC0307" registered device video1 [V4L2]
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- smsc911x: Driver version 2008-10-21.
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- emxx-ohci-driver emxx-ohci-driver: EMXX OHCI
- emxx-ohci-driver emxx-ohci-driver: new USB bus registered, assigned bus number 1
- emxx-ohci-driver emxx-ohci-driver: irq 115, io mem 0xe2700000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- ohci_hcd: ***** USB Over Current !!
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver usbserial
- usbserial: USB Serial Driver core
- USB Serial support registered for GSM modem (1-port)
- usbcore: registered new interface driver option
- option: v0.7.2:USB Driver for GSM modems
- udc: version Dec 20 2011
- android init
- android_probe pdata: c0455e7c
- android_bind
- android_usb gadget: android_usb ready
- udc: ----- VBUS OFF
- f_adb init
- android_register_function adb
- f_mass_storage init
- fsg_probe pdev: c0455660, pdata: c0455e6c
- android_register_function usb_mass_storage
- android_usb gadget: Mass Storage Function, version: 2009/09/11
- android_usb gadget: Number of LUNs=2
- lun0: LUN: removable file: (no medium)
- lun1: LUN: removable file: (no medium)
- adb_bind_config
- input: gpio-keys as /devices/platform/gpio-keys/input/input0
- input: remocon as /devices/virtual/input/input1
- rtc-pcf8563 0-0051: chip found, driver version 0.4.3
- using rtc device, rtc-pcf8563, for alarms
- rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
- Starting wdt.
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- Bluetooth: HCI UART driver ver 2.2
- Bluetooth: HCI H4 protocol initialized
- bcm_pwr_init
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- logger: created 64K log 'log_main'
- logger: created 256K log 'log_events'
- logger: created 64K log 'log_radio'
- logger: created 64K log 'log_system'
- emxx_nts: registered device ntsc
- Starting sound codec.
- ALSA device list:
- #0: sound codec (emxx mixer)
- TCP cubic registered
- NET: Registered protocol family 17
- emev_rfkill_probe
- emev_rfkill_set_power
- Bluetooth: L2CAP ver 2.14
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO (Voice Link) ver 0.6
- Bluetooth: SCO socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- Skipping unavailable LED gpio 160 (led1)
- Skipping unavailable LED gpio 160 (led2)
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
- input: pixcir168 as /devices/i2c-0/0-005c/input/input2
- mmc0: new high speed MMC card at address 0001
- mmcblk0: mmc0:0001 SEM04G 3.68 GiB
- emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: insmod successfully!
- mmcblk0:
- rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- rtc-pcf8563 0-0051: setting system clock to 1970-01-02 17:25:31 UTC (149131)
- axp192_bat_init
- emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: Unable to write to i2c touchscreen!
- p1 p2 p3 p4 <
- axp192_battery axp192_battery: axp192_bat_probe
- register power supply successful
- p5
- touchkey 0-0050: insmod successfully!
- p6 p7 >
- input: emxx-sensors as /devices/platform/emxx_sensors_plat/input/input3
- [GOODIX] check another ts, ignore ...
- Goodix-TS: probe of 0-0055 failed with error -17
- touch_button:eKT2201 Detected(Product ID:0x22)
- input: tb_i2c as /devices/i2c-0/0-0010/input/input4
- touch_button:probe successfully!
- EXT3-fs: barriers not enabled
- mmc1: new high speed SD card at address 0002
- mmcblk1: mmc1:0002 00000 1.90 GiB
- mmcblk1: p1 p2 p3
- EXT3-fs (mmcblk0p5): warning: maximal mount count reached, running e2fsck is recommended
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (mmcblk0p5): using internal journal
- EXT3-fs (mmcblk0p5): recovery complete
- EXT3-fs (mmcblk0p5): mounted filesystem with writeback data mode
- VFS: Mounted root (ext3 filesystem) on device 179:5.
- Freeing init memory: 120K
- init: /init.rc: 148: user option requires a user id
- EXT3-fs: barriers not enabled
- EXT3-fs (mmcblk0p6): warning: maximal mount count reached, running e2fsck is recommended
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (mmcblk0p6): using internal journal
- EXT3-fs (mmcblk0p6): recovery complete
- EXT3-fs (mmcblk0p6): mounted filesystem with writeback data mode
- enabling adb
- adb_open
- init: untracked pid 82 exited
- set_codec_mode :0
- warning: `zygote' uses 32-bit capabilities (legacy support in use)
- request_suspend_state: wakeup (3->0) at 17350162208 (1970-01-02 17:25:47.075884147 UTC)
- binder: release proc 178, transaction 3566, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release proc 431, transaction 3881, not freed
- binder: release proc 431, transaction 3882, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- request_suspend_state: sleep (0->3) at 48726839039 (1970-01-02 17:26:18.452591466 UTC)
- request_suspend_state: wakeup (3->0) at 51196715227 (1970-01-02 17:26:20.922467654 UTC)
- request_suspend_state: sleep (0->3) at 56696900016 (1970-01-02 17:26:26.422652443 UTC)
- binder: release proc 468, transaction 4804, not freed
- binder: release proc 468, transaction 4805, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- request_suspend_state: wakeup (3->0) at 108699253540 (1970-01-02 17:27:18.425005967 UTC)
- request_suspend_state: sleep (0->3) at 114176808551 (1970-01-02 17:27:23.902560978 UTC)
- udc: ----- VBUS OFF
- udc: ----- VBUS OFF
- udc: ----- VBUS OFF
- request_suspend_state: wakeup (3->0) at 125321414584 (1970-01-02 17:27:35.047167011 UTC)
- usb 1-1: new low speed USB device using emxx-ohci-driver and address 2
- input: USB USB Keykoard as /devices/platform/emxx-ohci-driver/usb1/1-1/1-1:1.0/input/input5
- generic-usb 0003:1C4F:0002.0001: input: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-emxx_ohci-1/input0
- binder: release proc 503, transaction 5196, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
- generic-usb 0003:1C4F:0002.0002: timeout initializing reports
- input: USB USB Keykoard as /devices/platform/emxx-ohci-driver/usb1/1-1/1-1:1.1/input/input6
- generic-usb 0003:1C4F:0002.0002: input: USB HID v1.10 Device [USB USB Keykoard] on usb-emxx_ohci-1/input1
- binder: release proc 538, transaction 5544, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release proc 625, transaction 6388, not freed
- binder: release proc 660, transaction 6989, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- ###Detect sensor idcode=0x99
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release proc 756, transaction 7940, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release 797:805 transaction 8508 out, still active
- binder: 106:231 transaction failed 29189, size 8-0
- binder: send failed reply for transaction 8508, target dead
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release proc 823, transaction 8676, not freed
- usb 1-1: USB disconnect, address 2
- binder: release proc 859, transaction 9015, not freed
- binder: release proc 835, transaction 9016, not freed
- binder: 106:122 transaction failed 29189, size 100-0
- request_suspend_state: sleep (0->3) at 253329430502 (1970-01-02 17:29:43.055152441 UTC)
- request_suspend_state: wakeup (3->0) at 253997784171 (1970-01-02 17:29:43.723536598 UTC)
- request_suspend_state: sleep (0->3) at 255367021966 (1970-01-02 17:29:45.092774393 UTC)
- binder: 106:122 transaction failed 29189, size 100-0
- binder: release proc 894, transaction 9734, not freed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement