Guest User

dmesg

a guest
Aug 24th, 2021
558
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.14.0-rc7 (chewitt@toolbox) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Tue Aug 24 09:48:40 UTC 2021
  3. [ 0.000000] Machine model: Minix NEO U1
  4. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  5. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000040000000, size 896 MiB
  6. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  7. [ 0.000000] Zone ranges:
  8. [ 0.000000] DMA [mem 0x0000000000000000-0x0000000077ffffff]
  9. [ 0.000000] DMA32 empty
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
  14. [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
  15. [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
  16. [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
  17. [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
  18. [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000077ffffff]
  19. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
  20. [ 0.000000] psci: probing for conduit method from DT.
  21. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  22. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  23. [ 0.000000] psci: Trusted OS migration not required
  24. [ 0.000000] percpu: Embedded 24 pages/cpu s57872 r8192 d32240 u98304
  25. [ 0.000000] pcpu-alloc: s57872 r8192 d32240 u98304 alloc=24*4096
  26. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  27. [ 0.000000] Detected VIPT I-cache on CPU0
  28. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  29. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  30. [ 0.000000] CPU features: detected: ARM erratum 843419
  31. [ 0.000000] CPU features: detected: ARM erratum 845719
  32. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483840
  33. [ 0.000000] Kernel command line: boot=UUID=1608-4711 disk=UUID=a20dc8d6-b6ab-4290-b687-b3ecca0c30b0 quiet systemd.debug_shell=ttyAML0 console=ttyAML0,115200n8 console=tty0 mac=A0:1E:0B:06:88:0C
  34. [ 0.000000] Unknown command line parameters: boot=UUID=1608-4711 disk=UUID=a20dc8d6-b6ab-4290-b687-b3ecca0c30b0 mac=A0:1E:0B:06:88:0C
  35. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  36. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  37. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  38. [ 0.000000] Memory: 927432K/1966080K available (11584K kernel code, 1854K rwdata, 4408K rodata, 6208K init, 4443K bss, 121144K reserved, 917504K cma-reserved)
  39. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  41. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  42. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  43. [ 0.000000] Tracing variant of Tasks RCU enabled.
  44. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  45. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  46. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  47. [ 0.000000] Root IRQ handler: gic_handle_irq
  48. [ 0.000000] GIC: Using split EOI/Deactivate mode
  49. [ 0.000000] irq_meson_gpio: 133 to 8 gpio interrupt mux initialized
  50. [ 0.000000] random: get_random_bytes called from start_kernel+0x740/0x930 with crng_init=0
  51. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  52. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  53. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  54. [ 0.000230] Console: colour dummy device 80x25
  55. [ 0.000266] printk: console [tty0] enabled
  56. [ 0.000272] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  57. [ 0.000276] ... MAX_LOCKDEP_SUBCLASSES: 8
  58. [ 0.000280] ... MAX_LOCK_DEPTH: 48
  59. [ 0.000284] ... MAX_LOCKDEP_KEYS: 8192
  60. [ 0.000288] ... CLASSHASH_SIZE: 4096
  61. [ 0.000292] ... MAX_LOCKDEP_ENTRIES: 32768
  62. [ 0.000296] ... MAX_LOCKDEP_CHAINS: 65536
  63. [ 0.000300] ... CHAINHASH_SIZE: 32768
  64. [ 0.000304] memory used by lock dependency info: 3637 kB
  65. [ 0.000309] per task-struct memory footprint: 1920 bytes
  66. [ 0.000346] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  67. [ 0.000359] pid_max: default: 32768 minimum: 301
  68. [ 0.000506] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  69. [ 0.000524] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  70. [ 0.003185] rcu: Hierarchical SRCU implementation.
  71. [ 0.004271] smp: Bringing up secondary CPUs ...
  72. [ 0.005716] Detected VIPT I-cache on CPU1
  73. [ 0.005782] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  74. [ 0.007344] Detected VIPT I-cache on CPU2
  75. [ 0.007384] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  76. [ 0.008935] Detected VIPT I-cache on CPU3
  77. [ 0.008970] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  78. [ 0.009118] smp: Brought up 1 node, 4 CPUs
  79. [ 0.009129] SMP: Total of 4 processors activated.
  80. [ 0.009135] CPU features: detected: 32-bit EL0 Support
  81. [ 0.009140] CPU features: detected: CRC32 instructions
  82. [ 0.021226] CPU: All CPU(s) started at EL2
  83. [ 0.021283] alternatives: patching kernel code
  84. [ 0.022545] devtmpfs: initialized
  85. [ 0.037377] KASLR disabled due to lack of seed
  86. [ 0.037704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  87. [ 0.037724] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
  88. [ 0.059483] pinctrl core: initialized pinctrl subsystem
  89. [ 0.061106] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  90. [ 0.063739] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  91. [ 0.063958] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  92. [ 0.064210] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  93. [ 0.065260] thermal_sys: Registered thermal governor 'step_wise'
  94. [ 0.065770] cpuidle: using governor menu
  95. [ 0.065922] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  96. [ 0.066069] ASID allocator initialised with 32768 entries
  97. [ 0.091939] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
  98. [ 0.097892] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
  99. [ 0.098307] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
  100. [ 0.119067] cryptd: max_cpu_qlen set to 1000
  101. [ 0.125297] iommu: Default domain type: Translated
  102. [ 0.125645] vgaarb: loaded
  103. [ 0.126184] SCSI subsystem initialized
  104. [ 0.126527] usbcore: registered new interface driver usbfs
  105. [ 0.126608] usbcore: registered new interface driver hub
  106. [ 0.126676] usbcore: registered new device driver usb
  107. [ 0.127231] mc: Linux media interface: v0.10
  108. [ 0.127280] videodev: Linux video capture interface: v2.00
  109. [ 0.127476] pps_core: LinuxPPS API ver. 1 registered
  110. [ 0.127482] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  111. [ 0.128213] Advanced Linux Sound Architecture Driver Initialized.
  112. [ 0.129520] clocksource: Switched to clocksource arch_sys_counter
  113. [ 0.130020] FS-Cache: Loaded
  114. [ 0.142594] NET: Registered PF_INET protocol family
  115. [ 0.142816] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  116. [ 0.144040] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 81920 bytes, linear)
  117. [ 0.144250] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  118. [ 0.144511] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes, linear)
  119. [ 0.145912] TCP: Hash tables configured (established 16384 bind 16384)
  120. [ 0.146247] UDP hash table entries: 1024 (order: 5, 163840 bytes, linear)
  121. [ 0.146468] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes, linear)
  122. [ 0.146921] NET: Registered PF_UNIX/PF_LOCAL protocol family
  123. [ 0.147812] RPC: Registered named UNIX socket transport module.
  124. [ 0.147820] RPC: Registered udp transport module.
  125. [ 0.147825] RPC: Registered tcp transport module.
  126. [ 0.147831] RPC: Registered tcp NFSv4.1 backchannel transport module.
  127. [ 0.147843] PCI: CLS 0 bytes, default 64
  128. [ 0.163859] Initialise system trusted keyrings
  129. [ 0.164290] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  130. [ 0.181125] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  131. [ 0.181555] FS-Cache: Netfs 'nfs' registered for caching
  132. [ 0.182471] NFS: Registering the id_resolver key type
  133. [ 0.182516] Key type id_resolver registered
  134. [ 0.182522] Key type id_legacy registered
  135. [ 0.182702] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  136. [ 0.182723] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  137. [ 0.183554] FS-Cache: Netfs 'cifs' registered for caching
  138. [ 0.184080] Key type cifs.idmap registered
  139. [ 0.213753] NET: Registered PF_ALG protocol family
  140. [ 0.213788] Key type asymmetric registered
  141. [ 0.213808] Asymmetric key parser 'x509' registered
  142. [ 0.213865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  143. [ 0.214095] io scheduler mq-deadline registered
  144. [ 0.214102] io scheduler kyber registered
  145. [ 0.231230] soc soc0: Amlogic Meson GXBB (S905) Revision 1f:c (13:1) Detected
  146. [ 0.234346] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 20, base_baud = 1500000) is a meson_uart
  147. [ 0.234673] serial serial0: tty port ttyAML6 registered
  148. [ 0.235671] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 25, base_baud = 1500000) is a meson_uart
  149. [ 0.235829] printk: console [ttyAML0] enabled
  150. [ 0.255682] brd: module loaded
  151. [ 0.255858] loop: module loaded
  152. [ 0.348396] Loading iSCSI transport class v2.0-870.
  153. [ 0.349474] iscsi: registered transport (tcp)
  154. [ 0.351584] libphy: Fixed MDIO Bus: probed
  155. [ 0.353086] tun: Universal TUN/TAP device driver, 1.6
  156. [ 0.354171] usbcore: registered new interface driver rtl8150
  157. [ 0.354247] usbcore: registered new interface driver r8152
  158. [ 0.355264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  159. [ 0.355271] ehci-platform: EHCI generic platform driver
  160. [ 0.355470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  161. [ 0.355496] ohci-platform: OHCI generic platform driver
  162. [ 0.356273] usbcore: registered new interface driver uas
  163. [ 0.356351] usbcore: registered new interface driver usb-storage
  164. [ 0.356701] mousedev: PS/2 mouse device common for all mice
  165. [ 0.357290] i2c /dev entries driver
  166. [ 0.366791] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  167. [ 0.367908] ledtrig-cpu: registered to indicate activity on CPUs
  168. [ 0.368621] meson-sm: secure-monitor enabled
  169. [ 0.369468] hid: raw HID events driver (C) Jiri Kosina
  170. [ 0.371713] usbcore: registered new interface driver usbhid
  171. [ 0.371731] usbhid: USB HID core driver
  172. [ 0.373601] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  173. [ 0.384393] NET: Registered PF_INET6 protocol family
  174. [ 0.385951] Segment Routing with IPv6
  175. [ 0.386025] NET: Registered PF_PACKET protocol family
  176. [ 0.386315] Key type dns_resolver registered
  177. [ 0.386709] Loading compiled-in X.509 certificates
  178. [ 0.438337] meson-drm d0100000.vpu: Queued 3 outputs on vpu
  179. [ 0.465639] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  180. [ 0.466452] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  181. [ 0.467337] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
  182. [ 0.468525] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
  183. [ 0.501731] mmc1: new HS200 MMC card at address 0001
  184. [ 0.502843] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
  185. [ 0.503282] mmcblk1boot0: mmc1:0001 AJNB4R 4.00 MiB
  186. [ 0.503719] mmcblk1boot1: mmc1:0001 AJNB4R 4.00 MiB
  187. [ 0.504068] mmcblk1rpmb: mmc1:0001 AJNB4R 4.00 MiB, chardev (242:0)
  188. [ 0.562466] random: fast init done
  189. [ 0.585023] [drm] kms: can't enable cloning when we probably wanted to.
  190. [ 0.762297] Console: switching to colour frame buffer device 240x67
  191. [ 0.796915] meson-drm d0100000.vpu: [drm] fb0: meson frame buffer device
  192. [ 0.798540] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
  193. [ 0.798556] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
  194. [ 0.798754] meson8b-dwmac c9410000.ethernet: PTP uses main clock
  195. [ 0.800244] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  196. [ 0.800260] meson8b-dwmac c9410000.ethernet: DWMAC1000
  197. [ 0.800268] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
  198. [ 0.800275] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
  199. [ 0.800280] meson8b-dwmac c9410000.ethernet: COE Type 2
  200. [ 0.800287] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
  201. [ 0.800293] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
  202. [ 0.800400] meson8b-dwmac c9410000.ethernet: Normal descriptors
  203. [ 0.800406] meson8b-dwmac c9410000.ethernet: Ring mode enabled
  204. [ 0.800412] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  205. [ 0.801818] libphy: stmmac: probed
  206. [ 0.993450] dwc2 c9000000.usb: supply vusb_d not found, using dummy regulator
  207. [ 0.993731] dwc2 c9000000.usb: supply vusb_a not found, using dummy regulator
  208. [ 0.995219] phy phy-c0000000.phy.0: USB ID detect failed!
  209. [ 0.995236] phy phy-c0000000.phy.0: phy poweron failed --> -22
  210. [ 0.995589] dwc2: probe of c9000000.usb failed with error -22
  211. [ 0.997178] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
  212. [ 0.997434] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
  213. [ 1.057894] dwc2 c9100000.usb: DWC OTG Controller
  214. [ 1.058098] dwc2 c9100000.usb: new USB bus registered, assigned bus number 1
  215. [ 1.058162] dwc2 c9100000.usb: irq 49, io mem 0xc9100000
  216. [ 1.058599] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
  217. [ 1.058609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  218. [ 1.058616] usb usb1: Product: DWC OTG Controller
  219. [ 1.058623] usb usb1: Manufacturer: Linux 5.14.0-rc7 dwc2_hsotg
  220. [ 1.058629] usb usb1: SerialNumber: c9100000.usb
  221. [ 1.059602] hub 1-0:1.0: USB hub found
  222. [ 1.059649] hub 1-0:1.0: 1 port detected
  223. [ 1.062831] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  224. [ 1.063031] meson-gx-mmc d0072000.mmc: Got CD GPIO
  225. [ 1.063361] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
  226. [ 1.076456] debugfs: Directory 'c1105400.audio-controller' with parent 'MINIX-NEO' already present!
  227. [ 1.085629] printk: console [netcon0] enabled
  228. [ 1.085645] netconsole: network logging started
  229. [ 1.086255] ALSA device list:
  230. [ 1.086262] #0: MINIX-NEO
  231. [ 1.098581] Freeing unused kernel memory: 6208K
  232. [ 1.098892] Run /init as init process
  233. [ 1.098903] with arguments:
  234. [ 1.098908] /init
  235. [ 1.098914] with environment:
  236. [ 1.098920] HOME=/
  237. [ 1.098925] TERM=linux
  238. [ 1.098931] boot=UUID=1608-4711
  239. [ 1.098937] disk=UUID=a20dc8d6-b6ab-4290-b687-b3ecca0c30b0
  240. [ 1.098943] mac=A0:1E:0B:06:88:0C
  241. [ 1.127026] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  242. [ 1.129369] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  243. [ 1.131515] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  244. [ 1.135363] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  245. [ 1.226703] mmc2: new high speed SDIO card at address 0001
  246. [ 1.239445] Checking disk(s): UUID=1608-4711 UUID=a20dc8d6-b6ab-4290-b687-b3ecca0c30b0
  247. [ 1.297898] mmc0: new ultra high speed SDR50 SDHC card at address 0001
  248. [ 1.299051] mmcblk0: mmc0:0001 00000 29.3 GiB
  249. [ 1.301326] mmcblk0: p1 p2
  250. [ 1.357600] usb 1-1: new high-speed USB device number 2 using dwc2
  251. [ 1.567766] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  252. [ 1.567812] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  253. [ 1.567835] usb 1-1: Product: USB2.0 Hub
  254. [ 1.570322] hub 1-1:1.0: USB hub found
  255. [ 1.570746] hub 1-1:1.0: 4 ports detected
  256. [ 1.627747] fsck: CP437: Invalid argument
  257. [ 1.627920] fsck: fsck.fat 4.1 (2017-01-24)
  258. [ 1.628139] fsck: /dev/mmcblk0p1: 83 files, 14759/65501 clusters
  259. [ 1.628395] fsck: STORAGE: clean, 1354/7544832 files, 967253/30175232 blocks
  260. [ 1.877826] usb 1-1.1: new full-speed USB device number 3 using dwc2
  261. [ 1.900616] loop0: detected capacity change from 0 to 206312
  262. [ 1.990709] usb 1-1.1: New USB device found, idVendor=400c, idProduct=107a, bcdDevice=10.01
  263. [ 1.990756] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  264. [ 1.990779] usb 1-1.1: Product: SAGE AirMouse
  265. [ 1.990798] usb 1-1.1: Manufacturer: SAGE
  266. [ 1.990815] usb 1-1.1: SerialNumber: 䦵Რ㺻禧
  267. [ 1.998647] input: SAGE SAGE AirMouse Keyboard as /devices/platform/soc/c9100000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:400C:107A.0001/input/input0
  268. [ 2.059714] hid-generic 0003:400C:107A.0001: input,hiddev96,hidraw0: USB HID v1.01 Keyboard [SAGE SAGE AirMouse] on usb-c9100000.usb-1.1/input0
  269. [ 2.066375] input: SAGE SAGE AirMouse as /devices/platform/soc/c9100000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:400C:107A.0002/input/input2
  270. [ 2.067115] input: SAGE SAGE AirMouse System Control as /devices/platform/soc/c9100000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:400C:107A.0002/input/input3
  271. [ 2.126142] input: SAGE SAGE AirMouse Consumer Control as /devices/platform/soc/c9100000.usb/usb1/1-1/1-1.1/1-1.1:1.1/0003:400C:107A.0002/input/input4
  272. [ 2.126745] hid-generic 0003:400C:107A.0002: input,hiddev97,hidraw1: USB HID v1.01 Mouse [SAGE SAGE AirMouse] on usb-c9100000.usb-1.1/input1
  273. [ 2.148754] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  274. [ 2.590127] kernel-overlays-setup: setup base modules
  275. [ 2.750704] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.14.0-rc7
  276. [ 2.856976] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  277. [ 2.858741] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  278. [ 2.860492] kernel-overlays-setup: done
  279. [ 3.129481] random: crng init done
  280. [ 3.236195] systemd[1]: System time before build time, advancing clock.
  281. [ 3.372400] systemd[1]: systemd 247.3 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  282. [ 3.373396] systemd[1]: Detected architecture arm64.
  283. [ 3.416177] systemd[1]: Set hostname to <LibreELEC>.
  284. [ 3.750467] systemd[1]: /usr/lib/systemd/system/ethmactool-config.service:10: Unknown key name 'ConditionPathIsDirectory' in section 'Service', ignoring.
  285. [ 3.795752] systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
  286. [ 3.859486] systemd[1]: Created slice system-modprobe.slice.
  287. [ 3.862778] systemd[1]: Created slice User and Session Slice.
  288. [ 3.863333] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  289. [ 3.863721] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  290. [ 3.864069] systemd[1]: Reached target Paths.
  291. [ 3.864214] systemd[1]: Reached target Slices.
  292. [ 3.897264] systemd[1]: Listening on RPCbind Server Activation Socket.
  293. [ 3.897601] systemd[1]: Reached target RPC Port Mapper.
  294. [ 3.898356] systemd[1]: Listening on initctl Compatibility Named Pipe.
  295. [ 3.906957] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  296. [ 3.909690] systemd[1]: Listening on Journal Socket (/dev/log).
  297. [ 3.911147] systemd[1]: Listening on Journal Socket.
  298. [ 3.915131] systemd[1]: Listening on udev Control Socket.
  299. [ 3.915967] systemd[1]: Listening on udev Kernel Socket.
  300. [ 3.916605] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  301. [ 3.924259] systemd[1]: Mounting POSIX Message Queue File System...
  302. [ 3.931460] systemd[1]: Mounting Kernel Debug File System...
  303. [ 3.932130] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  304. [ 3.939376] systemd[1]: Mounting Variable Directory...
  305. [ 3.947478] systemd[1]: Started Early root shell on /dev/ttyAML0 FOR DEBUGGING ONLY.
  306. [ 3.955365] systemd[1]: Starting Create list of static device nodes for the current kernel...
  307. [ 3.963053] systemd[1]: Starting Load Kernel Module configfs...
  308. [ 3.971694] systemd[1]: Starting Load Kernel Module drm...
  309. [ 3.980540] systemd[1]: Starting Load Kernel Module fuse...
  310. [ 3.989775] systemd[1]: Starting Show Version...
  311. [ 3.997798] systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs...
  312. [ 4.005065] systemd[1]: Starting Mounting swapfile...
  313. [ 4.020937] fuse: init (API version 7.34)
  314. [ 4.034874] systemd[1]: Starting Load Kernel Modules...
  315. [ 4.043141] systemd[1]: Starting Setup NTP servers for timesyncd...
  316. [ 4.050800] systemd[1]: Starting Coldplug All udev Devices...
  317. [ 4.058970] systemd[1]: Starting Wait for Kernel Time Synchronisation...
  318. [ 4.073743] systemd[1]: Mounted POSIX Message Queue File System.
  319. [ 4.074403] systemd[1]: Mounted Kernel Debug File System.
  320. [ 4.074945] systemd[1]: Mounted Variable Directory.
  321. [ 4.084033] systemd[1]: Finished Create list of static device nodes for the current kernel.
  322. [ 4.086098] systemd[1]: modprobe@configfs.service: Succeeded.
  323. [ 4.093704] systemd[1]: Finished Load Kernel Module configfs.
  324. [ 4.095683] systemd[1]: modprobe@drm.service: Succeeded.
  325. [ 4.101660] systemd[1]: Finished Load Kernel Module drm.
  326. [ 4.110262] systemd[1]: modprobe@fuse.service: Succeeded.
  327. [ 4.115950] systemd[1]: Finished Load Kernel Module fuse.
  328. [ 4.123093] systemd[1]: Finished Show Version.
  329. [ 4.137395] systemd[1]: Finished Load Kernel Modules.
  330. [ 4.144673] systemd[1]: Finished Setup NTP servers for timesyncd.
  331. [ 4.152359] systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs.
  332. [ 4.160334] systemd[1]: Mounting FUSE Control File System...
  333. [ 4.167299] systemd[1]: Mounting Kernel Configuration File System...
  334. [ 4.168568] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  335. [ 4.175278] systemd[1]: Starting Apply Kernel Variables...
  336. [ 4.188206] systemd[1]: Finished Mounting swapfile.
  337. [ 4.189176] systemd[1]: Mounted FUSE Control File System.
  338. [ 4.190006] systemd[1]: Mounted Kernel Configuration File System.
  339. [ 4.190531] systemd[1]: Reached target Swap.
  340. [ 4.197444] systemd[1]: Mounting Temporary Directory (/tmp)...
  341. [ 4.210546] systemd[1]: Mounted Temporary Directory (/tmp).
  342. [ 4.211044] systemd[1]: Reached target Local File Systems.
  343. [ 4.217282] systemd[1]: Starting Setup machine-id...
  344. [ 4.226018] systemd[1]: Finished Apply Kernel Variables.
  345. [ 4.285603] systemd[1]: Finished Setup machine-id.
  346. [ 4.295885] systemd[1]: Starting Journal Service...
  347. [ 4.302336] systemd[1]: Starting Create Static Device Nodes in /dev...
  348. [ 4.363510] systemd[1]: Finished Create Static Device Nodes in /dev.
  349. [ 4.419042] systemd[1]: Started Journal Service.
  350. [ 4.453095] systemd-journald[295]: Received client request to flush runtime journal.
  351. [ 6.525884] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input7
  352. [ 6.602159] rtc-hym8563 1-0051: registered as rtc0
  353. [ 6.618219] rtc-hym8563 1-0051: setting system clock to 2021-08-24T12:47:04 UTC (1629809224)
  354. [ 6.625963] Registered IR keymap rc-minix-neo
  355. [ 6.741346] IR NEC protocol handler initialized
  356. [ 6.778822] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
  357. [ 6.780436] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  358. [ 6.780726] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input8
  359. [ 6.794549] meson-ir c8100580.ir: receiver initialized
  360. [ 6.837988] meson-vrtc c81000a8.rtc: registered as rtc1
  361. [ 7.018132] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
  362. [ 7.018248] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
  363. [ 7.018347] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
  364. [ 7.018445] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
  365. [ 7.018527] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
  366. [ 7.018820] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
  367. [ 7.026234] lima d00c0000.gpu: bus rate = 166666667
  368. [ 7.026264] lima d00c0000.gpu: mod rate = 24000000
  369. [ 7.026501] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
  370. [ 7.110733] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 1
  371. [ 7.115233] Bluetooth: Core ver 2.22
  372. [ 7.115381] NET: Registered PF_BLUETOOTH protocol family
  373. [ 7.115387] Bluetooth: HCI device and connection manager initialized
  374. [ 7.115746] Bluetooth: HCI socket layer initialized
  375. [ 7.115769] Bluetooth: L2CAP socket layer initialized
  376. [ 7.116017] Bluetooth: SCO socket layer initialized
  377. [ 7.216791] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  378. [ 7.305252] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  379. [ 7.405730] brcmfmac: F1 signature read @0x18000000=0x17224356
  380. [ 7.418210] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
  381. [ 7.461367] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.minix,neo-u1.txt failed with error -2
  382. [ 7.497711] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=50)
  383. [ 7.505629] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  384. [ 7.513643] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
  385. [ 7.513673] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
  386. [ 7.527762] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
  387. [ 7.677933] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
  388. [ 7.678129] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  389. [ 7.682448] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c
  390. [ 8.040507] input: eventlircd as /devices/virtual/input/input9
  391. [ 10.103882] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  392. [ 10.104012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  393. [ 10.153622] 8021q: 802.1Q VLAN Support v1.8
  394. [ 31.714077] USB_PWR: disabling
  395. [ 120.341887] rc rc0: two consecutive events of type space
RAW Paste Data