Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 4.893707] alg: No test for stdrng (krng)
- <6>[ 4.893859] io scheduler noop registered
- <6>[ 4.894073] io scheduler deadline registered
- <6>[ 4.894226] io scheduler cfq registered (default)
- <6>[ 4.900085] mdp4_overlay_pipe_alloc: pipe=c0578648 ndx=1
- <6>[ 4.911163] setup_fb_info msmfb->xres 480, msmfb->yres 800
- <6>[ 4.911468] msmfb_probe() installing 480 x 800 panel
- <6>[ 4.911987] mdp_lcdc_probe: initialized
- <6>[ 4.913177]
- <6>[ 4.913177] msm_vidc_dec: Inside vid_dec_init()
- <6>[ 4.913879]
- <6>[ 4.913879] msm_vidc_dec: Inside vid_dec_vcd_init()
- <6>[ 4.914215]
- <6>[ 4.914215] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 4.915008]
- <6>[ 4.915008] msm_vidc_enc: Inside vid_enc_vcd_init()
- <3>[ 4.915344]
- <3>[ 4.915344] err: Device config mismatch
- <6>[ 4.916748] msm_serial: detected port #1
- <6>[ 4.917022] msm_serial.1: ttyMSM1 at MMIO 0xacb00000 (irq = 69) is a MSM
- <6>[ 4.917694] msm_serial: driver initialized
- <6>[ 4.917968] PRUE G
- <6>[ 4.918121] msm_serial_hs.0: ttyHS0 at MMIO 0xa3300000 (irq = 73) is a MSM HS UART
- <6>[ 4.918884] msm_serial_hs module loaded
- <6>[ 4.919281] msm_serial_hs module loaded
- <6>[ 4.919830] msm_serial_hs module loaded
- <6>[ 4.923797] loop: module loaded
- <6>[ 4.924011] pmem: Initializing pmem (user-space) as cached
- <6>[ 4.925018] pmem: Initializing pmem_adsp (user-space) as non-cached
- <6>[ 4.925842] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- <6>[ 4.926483] spi_bma150_probe: G-sensor connect with microP: start initial, kvalue = 0x67fe00ef
- <6>[ 4.937622] __spi_bma150_set_mode: BMA get into SLEEP mode!
- <6>[ 4.938201] marimba_init
- <6>[ 4.938323] marimba_probe
- <6>[ 4.942810] marimba_codec_init
- <6>[ 4.943115] marimba_codec_probe
- <6>[ 4.943878] msm_qsd_spi_gpio_config
- <6>[ 4.944305] msm_spi_clock_set: 26000000
- <4>[ 4.945037] msm_spi_probe
- <7>[ 4.945526] new SPI msm_spi_probe
- <6>[ 4.945892] spi_aic3254_init
- <6>[ 4.946014] spi_aic3254_probe
- <6>[ 4.949737] PPP generic driver version 2.4.2
- <6>[ 4.950256] PPP Deflate Compression module registered
- <6>[ 4.950439] PPP BSD Compression module registered
- <6>[ 4.951324] PPP MPPE Compression module registered
- <6>[ 4.951446] NET: Registered protocol family 24
- <6>[ 4.952880] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 4.953002] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- <6>[ 4.953460] msm_rmnet: rmnet_init
- <6>[ 4.953582] msm_rmnet: rmnet_setup
- <6>[ 4.953704] msm_rmnet: rmnet_setup complete
- <6>[ 4.954040] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.954162] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.954986] msm_rmnet: rmnet_setup
- <6>[ 4.955139] msm_rmnet: rmnet_setup complete
- <6>[ 4.955352] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.955535] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.956268] msm_rmnet: rmnet_setup
- <6>[ 4.956390] msm_rmnet: rmnet_setup complete
- <6>[ 4.956695] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.956817] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.957519] msm_rmnet: rmnet_setup
- <6>[ 4.957733] msm_rmnet: rmnet_setup complete
- <6>[ 4.957977] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.958068] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.958892] msm_rmnet: rmnet_setup
- <6>[ 4.959014] msm_rmnet: rmnet_setup complete
- <6>[ 4.959320] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.959442] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.960174] msm_rmnet: rmnet_setup
- <6>[ 4.960388] msm_rmnet: rmnet_setup complete
- <6>[ 4.961578] msm_rmnet: rmnet_setup
- <6>[ 4.961700] msm_rmnet: rmnet_setup complete
- <6>[ 4.962677] msm_rmnet: rmnet_setup
- <6>[ 4.962799] msm_rmnet: rmnet_setup complete
- <6>[ 4.963653] msm_rmnet: rmnet_init complete
- <6>[ 4.963958] msm72k_udc: msm72k_probe
- <6>[ 4.964080] usb: accessory detect 1
- <6>[ 4.964172] usb: id_pin_gpio 145
- <6>[ 4.964355] usb: dock detect 0
- <6>[ 4.964477] usb: dock pin gpio 0
- <6>[ 4.964630] msm72k_udc: msm72k_probe() io=d4898000, irq=60, dma=ffa0d000(17fc0000)
- <6>[ 4.964843] __msm_rpc_connect: server not found 30000064:10003
- <3>[ 4.964935] msm_hsusb_rpc_connect: connect compatible failed vers = 10003
- <3>[ 4.965148] msm_hsusb_rpc_connect: rpc connect success vers = 10002
- <6>[ 4.965850] android init
- <6>[ 4.966125] android_probe pdata: c0555df4
- <6>[ 4.966461] android_bind
- <7>[ 4.966583] android_bind_config
- <6>[ 4.966949] android_usb gadget: android_usb ready
- <6>[ 4.967071] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
- <6>[ 4.967376] hsusb: IDLE -> ONLINE
- <6>[ 4.967468] usb: lpm exit
- <6>[ 4.967651] hsusb: reset controller
- <6>[ 4.967864] f_adb init
- <6>[ 4.968078] android_register_function adb
- <6>[ 4.968170] f_mass_storage init
- <6>[ 4.968292] android_register_function usb_mass_storage
- <6>[ 4.968475] f_rndis init
- <6>[ 4.968597] android_register_function ether
- <6>[ 4.968688] serial init
- <6>[ 4.968811] android_register_function serial
- <6>[ 4.968994] f_projector init
- <6>[ 4.969787] android_register_function projector
- <6>[ 4.969909] diag init
- <6>[ 4.970214] diag:msm_diag_probe(), pdev->id=0x0
- <6>[ 4.971252] diag:msm_diag_probe(), pdev->id=0xffffffff
- <6>[ 4.971435] android_register_function diag
- <4>[ 4.971588] android_usb gadget: using random self ethernet address
- <4>[ 4.971710] android_usb gadget: using random host ethernet address
- <6>[ 4.972351] usb0: MAC da:f9:78:ea:8b:6a
- <6>[ 4.972473] usb0: HOST MAC 6e:a6:a7:62:43:a3
- <6>[ 4.972869] mass_storage_bind_config
- <6>[ 4.973266] fsg_probe pdata: c0558128
- <6>[ 4.973907] android_usb gadget: Number of LUNs=1
- <6>[ 4.974121] adb_bind_config
- <6>[ 4.974914] diag_bind_config
- <6>[ 4.976074] serial_bind_config
- <6>[ 4.977203] projector_bind_config
- <6>[ 4.977416] projector_touch_init: x=480 y=800
- <6>[ 4.977813] input: projector_input as /devices/virtual/input/input1
- <6>[ 4.977996] projector_touch_init OK
- <6>[ 4.978363] input: projector-Keypad as /devices/virtual/input/input2
- <6>[ 4.978576] projector_keypad_init OK
- <6>[ 4.979095] usb: product_id=0xff9
- <6>[ 4.979980] spade_syn_ts_power: power 1
- <6>[ 5.005737] msm_hsusb_phy_reset
- <6>[ 5.151214] msm72k_udc: ulpi: write 0x06 to 0x36
- <6>[ 5.151306] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 5.151519] msm72k_udc: ulpi: write 0x31 to 0x32
- <6>[ 5.151641] msm72k_udc: ulpi: write 0x01 to 0x0d
- <6>[ 5.151733] msm72k_udc: ulpi: write 0x01 to 0x10
- <6>[ 5.151947] usb: notify offline
- <6>[ 5.152069] msm_hsusb: enable pullup
- <6>[ 5.155181] msm72k_udc: usb: suspend
- <6>[ 5.171234] usb: not AC charger
- <6>[ 5.171356] accessory_detect_init: id pin 145
- <3>[ 5.231445] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.231658] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.251434] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.251647] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.271453] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.271667] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.291473] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.291687] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <6>[ 5.307067] msm72k_udc: usb: reset
- <6>[ 5.307281] usb: send connect type 1
- <6>[ 5.307373] fsg_set_ums_state: 1
- <6>[ 5.307495] ums: set state 1
- <6>[ 5.307739] batt:online=1
- <6>[ 5.307922] batt: Update SMEM: cable type 1 at 1386808549 (1970-01-01 00:00:01.386595134 UTC)
- <6>[ 5.309356] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <3>[ 5.311492] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.311614] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.331481] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.331604] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.351501] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.351623] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.371551] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.371673] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.391571] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.391693] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.411590] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.411712] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <6>[ 5.428253] msm72k_udc: usb: reset
- <6>[ 5.430541] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <3>[ 5.431488] i2c_smbus_read_byte_data failed
- <6>[ 5.431823] atmel_ts_init():
- <6>[ 5.432067] spade_ts_atmel_power: 1
- <6>[ 5.452423] spade_ts_atmel_power: 2
- <6>[ 5.521942] Touch: 0x01 0x90 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.522949] Touch: 0x01 0x90 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.542480] Touch: 0x01 0x00 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.561614] Touch: No more message
- <6>[ 5.581665] info block: 0x80 0x10 0x20 0xAA 0x13 0x0B 0x11
- <6>[ 5.589996] android_usb gadget: high speed config #1: android
- <6>[ 5.590148] ums: set state 1
- <6>[ 5.601684] Type: 25, Start: 0070, Size: 82, Instance: 0, RD#: 0, 0
- <6>[ 5.621673] Type: 2C, Start: 00F2, Size: 1, Instance: 0, RD#: 0, 0
- <6>[ 5.641723] Type: 05, Start: 00F3, Size: 9, Instance: 0, RD#: 0, 0
- <6>[ 5.661773] Type: 06, Start: 00FC, Size: 6, Instance: 0, RD#: 1, 1
- <6>[ 5.681762] Type: 26, Start: 0102, Size: 8, Instance: 0, RD#: 0, 0
- <6>[ 5.701782] Type: 07, Start: 010A, Size: 3, Instance: 0, RD#: 0, 0
- <6>[ 5.721801] Type: 08, Start: 010D, Size: A, Instance: 0, RD#: 0, 0
- <6>[ 5.741821] Type: 09, Start: 0117, Size: 20, Instance: 0, RD#: 8, 2
- <6>[ 5.743041] Type: 0F, Start: 0137, Size: B, Instance: 0, RD#: 1, A
- <6>[ 5.744323] Type: 12, Start: 0142, Size: 2, Instance: 0, RD#: 0, 0
- <6>[ 5.745544] Type: 13, Start: 0144, Size: 10, Instance: 0, RD#: 1, B
- <6>[ 5.746826] Type: 14, Start: 0154, Size: C, Instance: 0, RD#: 1, C
- <6>[ 5.748138] Type: 16, Start: 0160, Size: 11, Instance: 0, RD#: 1, D
- <6>[ 5.749359] Type: 17, Start: 0171, Size: F, Instance: 0, RD#: 1, E
- <6>[ 5.750640] Type: 18, Start: 0180, Size: 13, Instance: 0, RD#: 4, F
- <6>[ 5.751861] Type: 19, Start: 0193, Size: E, Instance: 0, RD#: 1, 13
- <6>[ 5.753143] Type: 1C, Start: 01A1, Size: 6, Instance: 0, RD#: 1, 14
- <6>[ 5.753265] finger_type: 2, max finger: 4
- <6>[ 5.792816] CRC passed: 0xCD 0xD7 0xF6
- <6>[ 5.793334] Touch: set cable config
- <6>[ 5.795135] input: atmel-touchscreen as /devices/virtual/input/input3
- <6>[ 5.795715] atmel_qt602240 0-004a: Start touchscreen atmel-touchscreen in interrupt mode
- <6>[ 5.796508] GPIO Input Driver: Start gpio inputs for spade-keypad-v0 in interrupt mode
- <6>[ 5.797027] input: spade-keypad-v0 as /devices/virtual/input/input4
- <6>[ 5.797424] Touch Status: 0x01 0x00 0xCD 0xD7 0xF6
- <6>[ 5.799102] using input dev h2w headset for key reset
- <6>[ 5.799316] using input dev spade-keypad-v0 for key reset
- <6>[ 5.801086] using rtc device, msm_rtc, for alarms
- <6>[ 5.801300] rs30000048:00040000 rs30000048:00040000.262144: rtc core: registered msm_rtc as rtc0
- <6>[ 5.801666] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0
- <6>[ 5.801818] gpio_keys_scan_keys: key 1-115, 1 (205) changed to 0
- <6>[ 5.802032] gpio_keys_scan_keys: key 1-114, 2 (206) changed to 0
- <6>[ 5.802581] AKM8975 compass driver: init
- <7>[ 5.802703] akm8975_probe:
- <6>[ 5.804199] input: compass as /devices/virtual/input/input5
- <6>[ 5.805480] tpa2051d3_init
- <6>[ 5.805755] adp1650 Led Flash driver: init
- <6>[ 5.806121] isl29028_probe
- <6>[ 5.806243] isl29028_probe: lpi->mapping_size = 0
- <6>[ 5.807189] input: lightsensor-level as /devices/virtual/input/input6
- <6>[ 5.808135] input: proximity as /devices/virtual/input/input7
- <6>[ 5.808715] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da502f1
- <6>[ 5.808898] lightsensor_set_kvalue: als_kadc=0x2f1, als_gadc=0x2f8
- <6>[ 5.809112] lightsensor_update_table: Calibrated adc_table: data[0] = 6
- <6>[ 5.809204] lightsensor_update_table: Calibrated adc_table: data[1] = 3a
- <6>[ 5.809417] lightsensor_update_table: Calibrated adc_table: data[2] = 87
- <6>[ 5.809539] lightsensor_update_table: Calibrated adc_table: data[3] = 488
- <6>[ 5.809722] lightsensor_update_table: Calibrated adc_table: data[4] = 608
- <6>[ 5.809906] lightsensor_update_table: Calibrated adc_table: data[5] = 708
- <6>[ 5.810028] lightsensor_update_table: Calibrated adc_table: data[6] = 808
- <6>[ 5.810241] lightsensor_update_table: Calibrated adc_table: data[7] = 909
- <6>[ 5.810333] lightsensor_update_table: Calibrated adc_table: data[8] = a09
- <6>[ 5.810546] lightsensor_update_table: Calibrated adc_table: data[9] = fff
- <6>[ 5.832763] set_psensor_range: Setting psensor range (0x45, 0x55)
- <6>[ 5.833648] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530c13, ps_kparam2 = 0x140b0c0f
- <6>[ 5.833862] psensor_set_kvalue: PS calibrated ps_B_val = 0xc, ps_C_val = 0x13, ps_A_val = 0x14, ps_X_val = 0xb, ps_lt = 0xc, ps_ht = 0xf
- <6>[ 5.834075] set_psensor_range: Setting psensor range (0xC, 0xF)
- <6>[ 5.835174] isl29028_probe: Probe success!
- <4>[ 5.836090] __ov8810_probe
- <6>[ 5.836425] ov8810_vreg_enable camera vreg on
- <6>[ 5.836517] spade_sensor_vreg_on camera vreg on
- <6>[ 5.838195] sctrl.node 0
- <6>[ 5.838348] ov8810_probe called!
- <6>[ 5.891937] ov8810_probe successed! rc = 0
- <6>[ 5.892272] ov8810 s->node 0
- <6>[ 5.892395] Ov8810: doing clk switch (ov8810)
- <6>[ 5.902496] ov8810_sensor_probe, msm_camio_clk_rate_set 24000000
- <6>[ 6.042449] ov8810_probe_read_id, ov8810_probe_init_sensor 1
- <6>[ 6.042785] ov8810 model_id + ver = 0x8813
- <6>[ 6.042999] ov8810_probe_read_id, Expected id=0x8810
- <6>[ 6.043090] ov8810_probe_read_id, vreg_get vreg_af_actuator
- <6>[ 6.043304] ov8810_probe_init_sensor finishes
- <6>[ 6.093505] ov8810:kobject creat and add
- <6>[ 6.093627] Ov8810:sysfs_create_file
- <6>[ 6.093841] ov8810_sensor_probe: ov8810_probe_init_done 2695
- <4>[ 6.095336] __s5k3h1gx_probe
- <6>[ 6.095458] __s5k3h1gx_probe camera main get probed already.
- <6>[ 6.096374] msm_gemini_init gemini: success
- <6>[ 6.096679] Driver for 1-wire Dallas network protocol.
- <6>[ 6.097290] [ds2746_batt]ds2746_battery_init
- <6>[ 6.097503] [ds2746_batt] ds2746_battery_prob
- <6>[ 6.097808] batt: ds2784_notify: 0 1 at 2175802451 (1970-01-01 00:00:02.175710988 UTC)
- <6>[ 6.098022] batt: charger ON (SLOW) at 2176137817 (1970-01-01 00:00:02.175924402 UTC)
- <6>[ 6.098327] batt: charging SLOW
- <4>[ 6.099365] [D:BATT]Use default(300 Kohm) thermal resistance
- <6>[ 6.100006] device-mapper: uevent: version 1.0.3
- <6>[ 6.100708] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
- <6>[ 6.100952] Bluetooth: HCI UART driver ver 2.2
- <6>[ 6.101074] Bluetooth: HCI H4 protocol initialized
- <6>[ 6.101257] Bluetooth: HCILL protocol initialized
- <6>[ 6.101379] perflock_notifier_call: cpufreq lock speed 1024000
- <6>[ 6.101593] active perf lock 'boot-time'
- <3>[ 6.102447] mmc0: No card detect facilities available
- <6>[ 6.103027] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 8
- <6>[ 6.103210] mmc0: Platform slot type: MMC
- <6>[ 6.103332] mmc0: 4 bit data mode disabled
- <6>[ 6.103546] mmc0: 8 bit data mode enabled
- <6>[ 6.103637] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.103851] mmc0: Slot eject status = 0
- <6>[ 6.103942] mmc0: Power save feature enable = 1
- <6>[ 6.104064] mmc0: DM non-cached buffer at ffa10000, dma_addr 0x17fd3000
- <6>[ 6.104248] mmc0: DM cmd busaddr 0x17fd3000, cmdptr busaddr 0x17fd3300
- <6>[ 6.105194] mmc1: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8
- <6>[ 6.105316] mmc1: Platform slot type: N/A
- <6>[ 6.105438] mmc1: 4 bit data mode enabled
- <6>[ 6.105621] mmc1: 8 bit data mode disabled
- <6>[ 6.105743] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.105926] mmc1: Slot eject status = 1
- <6>[ 6.106048] mmc1: Power save feature enable = 1
- <6>[ 6.106170] mmc1: DM non-cached buffer at ffa11000, dma_addr 0x17df0000
- <6>[ 6.106353] mmc1: DM cmd busaddr 0x17df0000, cmdptr busaddr 0x17df0300
- <6>[ 6.107299] spade_sdslot_switchvdd: Disabling SD slot power
- <6>[ 6.107666] mmc2: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,332 dma 8
- <6>[ 6.107849] mmc2: Platform slot type: SD
- <6>[ 6.107971] mmc2: 4 bit data mode enabled
- <6>[ 6.108062] mmc2: 8 bit data mode disabled
- <6>[ 6.108276] mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.108367] mmc2: Slot eject status = 0
- <6>[ 6.108581] mmc2: Power save feature enable = 1
- <6>[ 6.108673] mmc2: DM non-cached buffer at ffa12000, dma_addr 0x17df3000
- <6>[ 6.108886] mmc2: DM cmd busaddr 0x17df3000, cmdptr busaddr 0x17df3300
- <7>[ 6.110107] Registered led device: amber
- <7>[ 6.110504] Registered led device: green
- <7>[ 6.110870] Registered led device: button-backlight
- <6>[ 6.110992] microp_led_probe: succeeded
- <7>[ 6.111846] Registered led device: keyboard-backlight
- <4>[ 6.113494] [D:BATT] [x0]3 [x8]1e e0 a a0 6b 60 0 21 11 1c
- <4>[ 6.113708] [D:BATT] V=4191(6b6) I=3(8) C=1232.0/1230(111c) id=4(aa) T=250(1ee) KADC=1000
- <4>[ 6.113830] [D:BATT] acr update: P=990, C=4340.
- <6>[ 6.114593] logger: created 64K log 'log_main'
- <4>[ 6.114898] [D:BATT]new RARC=990 C=1217mAh adc=4340.
- <4>[ 6.115081] [D:BATT] state change(0->3), full count=0, over load count=0 [2191]
- <4>[ 6.115203] [D:BATT] state change(3->5), full count=0, over load count=0 [2193]
- <6>[ 6.115417] ds2746_batt:__update_capacity start
- <6>[ 6.115509] batt: charging SLOW
- <4>[ 6.115722] [D:BATT][5] P=990 cable=10 flags=110 debug=0000 fst_discharge=990/1232 [2193]
- <6>[ 6.115966] logger: created 256K log 'log_events'
- <6>[ 6.116394] logger: created 64K log 'log_radio'
- <6>[ 6.116760] logger: created 64K log 'log_system'
- <4>[ 6.117980] No device for DAI CODEC_DAI
- <4>[ 6.118072] No device for DAI CPU_DAI
- <3>[ 6.118621] msm_soc: create pcms
- <6>[ 6.118927] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- <6>[ 6.120239] ALSA device list:
- <6>[ 6.120330] #0: msm-audio (MSM-CARD)
- <6>[ 6.120513] GACT probability NOT on
- <6>[ 6.120697] Mirror/redirect action on
- <6>[ 6.120819] u32 classifier
- <6>[ 6.120910] Actions configured
- <6>[ 6.121124] Netfilter messages via NETLINK v0.30.
- <6>[ 6.121276] nf_conntrack version 0.5.0 (9967 buckets, 39868 max)
- <4>[ 6.121704] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 6.121826] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 6.122009] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>[ 6.122344] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 6.122680] xt_time: kernel timezone is -0000
- <6>[ 6.122985] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 6.123291] arp_tables: (C) 2002 David S. Miller
- <6>[ 6.123474] TCP cubic registered
- <6>[ 6.123748] NET: Registered protocol family 10
- <6>[ 6.124389] lo: Disabled Privacy Extensions
- <6>[ 6.125671] Mobile IPv6
- <6>[ 6.125793] IPv6 over IPv4 tunneling driver
- <6>[ 6.126739] sit0: Disabled Privacy Extensions
- <6>[ 6.127441] ip6tnl0: Disabled Privacy Extensions
- <6>[ 6.127746] NET: Registered protocol family 17
- <6>[ 6.127899] NET: Registered protocol family 15
- <6>[ 6.128112] Bluetooth: L2CAP ver 2.14
- <6>[ 6.128326] Bluetooth: L2CAP socket layer initialized
- <6>[ 6.128448] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 6.128631] Bluetooth: SCO socket layer initialized
- <6>[ 6.128814] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 6.128936] Bluetooth: RFCOMM socket layer initialized
- <6>[ 6.129119] Bluetooth: RFCOMM ver 1.11
- <6>[ 6.129241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 6.129425] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 6.129760] ThumbEE CPU extension supported.
- <6>[ 6.130371] clock_late_init() disabled 19 unused clocks
- <6>[ 6.130981] [Port list] init()
- <6>[ 6.131835] [voice.c:voice_init] voice_init
- <6>[ 6.132049] dev_state -> DEV_INIT
- <6>[ 6.132293] voc_state -> VOICE_INIT
- <6>[ 6.132720] [voice] send CMD_ACQUIRE_INIT
- <6>[ 6.133666] VFP support v0.3: implementor 51 architecture 64 part 0f variant 1 rev 0
- <6>[ 6.134033] [voice.c:voice_thread] voice_thread() start
- <6>[ 6.137207] kgsl mmu config 0x1555551
- <6>[ 6.139251] rs30000048:00040000 rs30000048:00040000.262144: setting system clock to 2011-03-23 14:27:01 UTC (1300890421)
- <4>[ 6.139526] Warning: unable to open an initial console.
- <6>[ 6.139709] Freeing init memory: 184K
- <6>[ 6.263610] mmc0: new high speed MMC card at address 0001
- <6>[ 6.266113] mmcblk0: mmc0:0001 SEM04G 2.17 GiB
- <6>[ 6.266540] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 >
- <6>[ 6.371704] spade_sdslot_switchvdd: Setting level to 2900
- <6>[ 6.383239] keychord: using input dev h2w headset for fevent
- <6>[ 6.383483] keychord: using input dev spade-keypad-v0 for fevent
- <6>[ 6.388031] EXT4-fs (mmcblk0p25): INFO: recovery required on readonly filesystem
- <6>[ 6.388458] EXT4-fs (mmcblk0p25): write access will be enabled during recovery
- <6>[ 6.443603] spade_sdslot_switchvdd: Setting level to 2850
- <6>[ 6.496887] EXT4-fs (mmcblk0p25): orphan cleanup on readonly fs
- <7>[ 6.497314] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 198
- <6>[ 6.499359] EXT4-fs (mmcblk0p25): 1 orphan inode deleted
- <6>[ 6.499755] EXT4-fs (mmcblk0p25): recovery complete
- <6>[ 6.514984] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
- <4>[ 6.641662] mmc2: host does not support reading read-only switch. assuming write-enable.
- <6>[ 6.641876] mmc2: new high speed SDHC card at address b368
- <6>[ 6.642486] mmcblk1: mmc2:b368 G5105 7.45 GiB
- <6>[ 6.642913] mmcblk1: p1
- <6>[ 7.282257] EXT4-fs (mmcblk0p26): recovery complete
- <6>[ 7.284851] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 7.309844] EXT4-fs (mmcblk0p27): recovery complete
- <6>[ 7.312408] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 7.414367] EXT4-fs (mmcblk0p28): recovery complete
- <6>[ 7.416229] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1
- <3>[ 7.681396] init: service 'console' requires console
- <6>[ 7.690460] enabling adb
- <6>[ 7.690612] hsusb: ONLINE -> RESET
- <6>[ 7.690734] msm_hsusb: disable pullup
- <6>[ 7.690917] hsusb: reset controller
- <6>[ 7.702667] adb_open
- <6>[ 7.730133] msm_hsusb_phy_reset
- <7>[ 7.845092] akmd_open:
- <7>[ 7.855682] AKECS_GetOpenStatus:
- <6>[ 7.873901] msm72k_udc: ulpi: write 0x06 to 0x36
- <6>[ 7.873992] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 7.874206] msm72k_udc: ulpi: write 0x31 to 0x32
- <6>[ 7.874298] msm72k_udc: ulpi: write 0x01 to 0x0d
- <6>[ 7.874420] msm72k_udc: ulpi: write 0x01 to 0x10
- <6>[ 7.874633] usb: notify offline
- <6>[ 7.874786] msm_hsusb: enable pullup
- <6>[ 7.874908] hsusb: RESET -> ONLINE
- <6>[ 7.875213] adb_release
- <6>[ 7.875579] adb_open
- <6>[ 7.877899] msm72k_udc: usb: suspend
- <6>[ 7.992584] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[ 8.075012] msm72k_udc: usb: reset
- <6>[ 8.077392] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 8.102294] SMD: ch 0 0 -> 1
- <6>[ 8.102478] SMD: ch 39 0 -> 1
- <6>[ 8.102600] SMD: ch 0 1 -> 2
- <6>[ 8.102783] SMD: ch 39 1 -> 2
- <6>[ 8.102905] qmi: smd opened
- <6>[ 8.103057] SMD: ch 40 0 -> 1
- <6>[ 8.103179] SMD: ch 41 0 -> 1
- <6>[ 8.103393] SMD: ch 40 1 -> 2
- <6>[ 8.103485] qmi: smd opened
- <6>[ 8.103607] SMD: ch 41 1 -> 2
- <6>[ 8.103698] qmi: smd opened
- <6>[ 8.104919] qmi: ctl: wds use client_id 0x01
- <6>[ 8.105072] qmi: ctl: wds use client_id 0x01
- <6>[ 8.105194] qmi: ctl: wds use client_id 0x01
- <6>[ 8.200103] msm72k_udc: usb: reset
- <6>[ 8.202392] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 8.359863] android_usb gadget: high speed config #1: android
- <6>[ 8.360107] adb_function_set_alt: maxsize = 512
- <6>[ 8.360321] ums: set state 1
- <6>[ 8.437469] htc-acoustic: open
- <6>[ 8.437591] htc-acoustic: support_a1026: 0
- <6>[ 8.437713] htc-acoustic: release
- <6>[ 8.442596] htc-acoustic: open
- <6>[ 8.442871] htc-acoustic: setting size = 31854
- <6>[ 8.445556] htc-acoustic: Update adie (media) of handset_rx
- <6>[ 8.445983] htc-acoustic: Update adie (voice) of handset_rx
- <6>[ 8.446319] htc-acoustic: Update adie (media) of handset_tx
- <6>[ 8.446746] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.447113] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.447540] htc-acoustic: Update adie (media) of handset_tx
- <6>[ 8.447875] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.448364] htc-acoustic: Update adie (media) of headset_stereo_rx
- <6>[ 8.448730] htc-acoustic: Update adie (voice) of headset_stereo_rx
- <6>[ 8.449157] htc-acoustic: Update adie (media) of headset_mono_tx
- <6>[ 8.449462] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.449859] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.450195] htc-acoustic: Update adie (media) of headset_mono_tx
- <6>[ 8.450592] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.450866] htc-acoustic: Update adie (media) of speaker_mono_rx
- <6>[ 8.451263] htc-acoustic: Update adie (voice) of speaker_mono_rx
- <6>[ 8.451599] htc-acoustic: Update adie (media) of speaker_mono_tx
- <6>[ 8.451965] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.452362] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.452667] htc-acoustic: Update adie (media) of speaker_mono_tx
- <6>[ 8.453063] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.453399] htc-acoustic: Update adie (voice) of tty_headset_mono_rx
- <6>[ 8.453796] htc-acoustic: Update adie (voice) of tty_headset_mono_rx
- <6>[ 8.454132] htc-acoustic: Update adie (voice) of tty_headset_mono_tx
- <6>[ 8.455749] htc-acoustic: Update adie (voice) of tty_headset_mono_tx
- <3>[ 8.456054] htc-acoustic: can't find device with frequency 8000
- <6>[ 8.456604] htc-acoustic: Update adie (media) of fmradio_speaker_rx
- <6>[ 8.456970] htc-acoustic: Update adie (media) of headset_speaker_stereo_rx
- <3>[ 8.457427] htc-acoustic: can't find registry device with name fmtx_headset
- <6>[ 8.461151] htc-acdb: open
- <6>[ 8.461303] htc_acdb_open: smem size 327680
- <6>[ 8.462951] htc-acoustic: release
- <6>[ 8.467742] htc-acoustic: open
- <6>[ 8.467864] htc-acoustic: support_aic3254: 1
- <6>[ 8.468353] htc-acoustic: release
- <6>[ 8.468719] htc-acoustic: open
- <6>[ 8.468933] htc-acoustic: support_back_mic: 0
- <6>[ 8.469329] htc-acoustic: release
- <6>[ 8.469543] htc-acoustic: open
- <6>[ 8.469757] spade_get_acoustic_tables: system_rev 129
- <6>[ 8.469848] htc-acoustic: release
- <6>[ 8.470153] htc-acoustic: open
- <6>[ 8.470367] htc-acoustic: support_back_mic: 0
- <6>[ 8.470489] htc-acoustic: release
- <6>[ 8.476470] aic3254_ioctl: parameters(64, 1024, 806041a0)
- <6>[ 8.477081] aic3254_config: size = 23
- <6>[ 8.477386] msm_spi_clock_set: 9963243
- <6>[ 8.895019] aic3254_config: size = 1
- <6>[ 8.895233] aic3254_ioctl: update table(64,1024) successfully
- <6>[ 8.895385] aic3254_ioctl: parameters(64, 1024, 806341a8)
- <6>[ 8.895935] aic3254_ioctl: update table(64,1024) successfully
- <6>[ 8.896087] htc-acoustic: open
- <6>[ 8.896301] spade_get_acoustic_tables: system_rev 129
- <6>[ 8.896423] htc-acoustic: release
- <6>[ 9.389495] aic3254_ioctl: parameters(26, 16384, 806641b4)
- <6>[ 9.391876] aic3254_ioctl: update table(26,16384) successfully
- <6>[ 9.413726] aic3254_ioctl: index 25 for 40047321
- <6>[ 9.413940] aic3254_set_config: table(0x40047321) index(25)
- <4>[ 9.414123] aic3254_set_config: enable CLK
- <6>[ 9.414306] aic3254_set_config: miniDSP command len = 32
- <6>[ 9.414428] aic3254_set_config: rx mode 29, tx mode 29
- <6>[ 9.414520] aic3254_config: size = 32
- <6>[ 9.426086] aic3254_set_config: configure minidsp done
- <6>[ 9.426330] aic3254_ioctl: index 15 for 40047312
- <6>[ 9.426544] aic3254_set_config: table(0x40047312) index(15)
- <6>[ 9.426635] aic3254_set_config: enable tx
- <6>[ 9.426757] spade_tx_amp_enable 0
- <6>[ 9.426971] spade_mic_enable: 0, shift 0
- <6>[ 9.427062] aic3254_config: size = 23
- <6>[ 9.427642] aic3254_config: size = 20
- <6>[ 9.428161] spade_tx_amp_enable 1
- <6>[ 9.428283] spade_mic_enable: 1, shift 0
- <6>[ 9.429382] [ALSA] msm_set_voice_rx_vol: volume 100
- <6>[ 4.943878] msm_qsd_spi_gpio_config
- <6>[ 4.944305] msm_spi_clock_set: 26000000
- <4>[ 4.945037] msm_spi_probe
- <7>[ 4.945526] new SPI msm_spi_probe
- <6>[ 4.945892] spi_aic3254_init
- <6>[ 4.946014] spi_aic3254_probe
- <6>[ 4.949737] PPP generic driver version 2.4.2
- <6>[ 4.950256] PPP Deflate Compression module registered
- <6>[ 4.950439] PPP BSD Compression module registered
- <6>[ 4.951324] PPP MPPE Compression module registered
- <6>[ 4.951446] NET: Registered protocol family 24
- <6>[ 4.952880] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 4.953002] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- <6>[ 4.953460] msm_rmnet: rmnet_init
- <6>[ 4.953582] msm_rmnet: rmnet_setup
- <6>[ 4.953704] msm_rmnet: rmnet_setup complete
- <6>[ 4.954040] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.954162] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.954986] msm_rmnet: rmnet_setup
- <6>[ 4.955139] msm_rmnet: rmnet_setup complete
- <6>[ 4.955352] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.955535] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.956268] msm_rmnet: rmnet_setup
- <6>[ 4.956390] msm_rmnet: rmnet_setup complete
- <6>[ 4.956695] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.956817] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.957519] msm_rmnet: rmnet_setup
- <6>[ 4.957733] msm_rmnet: rmnet_setup complete
- <6>[ 4.957977] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.958068] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.958892] msm_rmnet: rmnet_setup
- <6>[ 4.959014] msm_rmnet: rmnet_setup complete
- <6>[ 4.959320] msm_rmnet: msm_rmnet_smd_probe
- <6>[ 4.959442] msm_rmnet: msm_rmnet_smd_probe complete
- <6>[ 4.960174] msm_rmnet: rmnet_setup
- <6>[ 4.960388] msm_rmnet: rmnet_setup complete
- <6>[ 4.961578] msm_rmnet: rmnet_setup
- <6>[ 4.961700] msm_rmnet: rmnet_setup complete
- <6>[ 4.962677] msm_rmnet: rmnet_setup
- <6>[ 4.962799] msm_rmnet: rmnet_setup complete
- <6>[ 4.963653] msm_rmnet: rmnet_init complete
- <6>[ 4.963958] msm72k_udc: msm72k_probe
- <6>[ 4.964080] usb: accessory detect 1
- <6>[ 4.964172] usb: id_pin_gpio 145
- <6>[ 4.964355] usb: dock detect 0
- <6>[ 4.964477] usb: dock pin gpio 0
- <6>[ 4.964630] msm72k_udc: msm72k_probe() io=d4898000, irq=60, dma=ffa0d000(17fc0000)
- <6>[ 4.964843] __msm_rpc_connect: server not found 30000064:10003
- <3>[ 4.964935] msm_hsusb_rpc_connect: connect compatible failed vers = 10003
- <3>[ 4.965148] msm_hsusb_rpc_connect: rpc connect success vers = 10002
- <6>[ 4.965850] android init
- <6>[ 4.966125] android_probe pdata: c0555df4
- <6>[ 4.966461] android_bind
- <7>[ 4.966583] android_bind_config
- <6>[ 4.966949] android_usb gadget: android_usb ready
- <6>[ 4.967071] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
- <6>[ 4.967376] hsusb: IDLE -> ONLINE
- <6>[ 4.967468] usb: lpm exit
- <6>[ 4.967651] hsusb: reset controller
- <6>[ 4.967864] f_adb init
- <6>[ 4.968078] android_register_function adb
- <6>[ 4.968170] f_mass_storage init
- <6>[ 4.968292] android_register_function usb_mass_storage
- <6>[ 4.968475] f_rndis init
- <6>[ 4.968597] android_register_function ether
- <6>[ 4.968688] serial init
- <6>[ 4.968811] android_register_function serial
- <6>[ 4.968994] f_projector init
- <6>[ 4.969787] android_register_function projector
- <6>[ 4.969909] diag init
- <6>[ 4.970214] diag:msm_diag_probe(), pdev->id=0x0
- <6>[ 4.971252] diag:msm_diag_probe(), pdev->id=0xffffffff
- <6>[ 4.971435] android_register_function diag
- <4>[ 4.971588] android_usb gadget: using random self ethernet address
- <4>[ 4.971710] android_usb gadget: using random host ethernet address
- <6>[ 4.972351] usb0: MAC da:f9:78:ea:8b:6a
- <6>[ 4.972473] usb0: HOST MAC 6e:a6:a7:62:43:a3
- <6>[ 4.972869] mass_storage_bind_config
- <6>[ 4.973266] fsg_probe pdata: c0558128
- <6>[ 4.973907] android_usb gadget: Number of LUNs=1
- <6>[ 4.974121] adb_bind_config
- <6>[ 4.974914] diag_bind_config
- <6>[ 4.976074] serial_bind_config
- <6>[ 4.977203] projector_bind_config
- <6>[ 4.977416] projector_touch_init: x=480 y=800
- <6>[ 4.977813] input: projector_input as /devices/virtual/input/input1
- <6>[ 4.977996] projector_touch_init OK
- <6>[ 4.978363] input: projector-Keypad as /devices/virtual/input/input2
- <6>[ 4.978576] projector_keypad_init OK
- <6>[ 4.979095] usb: product_id=0xff9
- <6>[ 4.979980] spade_syn_ts_power: power 1
- <6>[ 5.005737] msm_hsusb_phy_reset
- <6>[ 5.151214] msm72k_udc: ulpi: write 0x06 to 0x36
- <6>[ 5.151306] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 5.151519] msm72k_udc: ulpi: write 0x31 to 0x32
- <6>[ 5.151641] msm72k_udc: ulpi: write 0x01 to 0x0d
- <6>[ 5.151733] msm72k_udc: ulpi: write 0x01 to 0x10
- <6>[ 5.151947] usb: notify offline
- <6>[ 5.152069] msm_hsusb: enable pullup
- <6>[ 5.155181] msm72k_udc: usb: suspend
- <6>[ 5.171234] usb: not AC charger
- <6>[ 5.171356] accessory_detect_init: id pin 145
- <3>[ 5.231445] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.231658] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.251434] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.251647] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.271453] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.271667] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.291473] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.291687] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <6>[ 5.307067] msm72k_udc: usb: reset
- <6>[ 5.307281] usb: send connect type 1
- <6>[ 5.307373] fsg_set_ums_state: 1
- <6>[ 5.307495] ums: set state 1
- <6>[ 5.307739] batt:online=1
- <6>[ 5.307922] batt: Update SMEM: cable type 1 at 1386808549 (1970-01-01 00:00:01.386595134 UTC)
- <6>[ 5.309356] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <3>[ 5.311492] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.311614] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.331481] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.331604] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.351501] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.351623] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.371551] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.371673] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.391571] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.391693] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <3>[ 5.411590] msm_i2c msm_i2c.0: error, status 43c8 (20)
- <3>[ 5.411712] msm_i2c msm_i2c.0: Error during data xfer (-5) (20)
- <6>[ 5.428253] msm72k_udc: usb: reset
- <6>[ 5.430541] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <3>[ 5.431488] i2c_smbus_read_byte_data failed
- <6>[ 5.431823] atmel_ts_init():
- <6>[ 5.432067] spade_ts_atmel_power: 1
- <6>[ 5.452423] spade_ts_atmel_power: 2
- <6>[ 5.521942] Touch: 0x01 0x90 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.522949] Touch: 0x01 0x90 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.542480] Touch: 0x01 0x00 0xCD 0xD7 0xF6 0x00 0x00
- <6>[ 5.561614] Touch: No more message
- <6>[ 5.581665] info block: 0x80 0x10 0x20 0xAA 0x13 0x0B 0x11
- <6>[ 5.589996] android_usb gadget: high speed config #1: android
- <6>[ 5.590148] ums: set state 1
- <6>[ 5.601684] Type: 25, Start: 0070, Size: 82, Instance: 0, RD#: 0, 0
- <6>[ 5.621673] Type: 2C, Start: 00F2, Size: 1, Instance: 0, RD#: 0, 0
- <6>[ 5.641723] Type: 05, Start: 00F3, Size: 9, Instance: 0, RD#: 0, 0
- <6>[ 5.661773] Type: 06, Start: 00FC, Size: 6, Instance: 0, RD#: 1, 1
- <6>[ 5.681762] Type: 26, Start: 0102, Size: 8, Instance: 0, RD#: 0, 0
- <6>[ 5.701782] Type: 07, Start: 010A, Size: 3, Instance: 0, RD#: 0, 0
- <6>[ 5.721801] Type: 08, Start: 010D, Size: A, Instance: 0, RD#: 0, 0
- <6>[ 5.741821] Type: 09, Start: 0117, Size: 20, Instance: 0, RD#: 8, 2
- <6>[ 5.743041] Type: 0F, Start: 0137, Size: B, Instance: 0, RD#: 1, A
- <6>[ 5.744323] Type: 12, Start: 0142, Size: 2, Instance: 0, RD#: 0, 0
- <6>[ 5.745544] Type: 13, Start: 0144, Size: 10, Instance: 0, RD#: 1, B
- <6>[ 5.746826] Type: 14, Start: 0154, Size: C, Instance: 0, RD#: 1, C
- <6>[ 5.748138] Type: 16, Start: 0160, Size: 11, Instance: 0, RD#: 1, D
- <6>[ 5.749359] Type: 17, Start: 0171, Size: F, Instance: 0, RD#: 1, E
- <6>[ 5.750640] Type: 18, Start: 0180, Size: 13, Instance: 0, RD#: 4, F
- <6>[ 5.751861] Type: 19, Start: 0193, Size: E, Instance: 0, RD#: 1, 13
- <6>[ 5.753143] Type: 1C, Start: 01A1, Size: 6, Instance: 0, RD#: 1, 14
- <6>[ 5.753265] finger_type: 2, max finger: 4
- <6>[ 5.792816] CRC passed: 0xCD 0xD7 0xF6
- <6>[ 5.793334] Touch: set cable config
- <6>[ 5.795135] input: atmel-touchscreen as /devices/virtual/input/input3
- <6>[ 5.795715] atmel_qt602240 0-004a: Start touchscreen atmel-touchscreen in interrupt mode
- <6>[ 5.796508] GPIO Input Driver: Start gpio inputs for spade-keypad-v0 in interrupt mode
- <6>[ 5.797027] input: spade-keypad-v0 as /devices/virtual/input/input4
- <6>[ 5.797424] Touch Status: 0x01 0x00 0xCD 0xD7 0xF6
- <6>[ 5.799102] using input dev h2w headset for key reset
- <6>[ 5.799316] using input dev spade-keypad-v0 for key reset
- <6>[ 5.801086] using rtc device, msm_rtc, for alarms
- <6>[ 5.801300] rs30000048:00040000 rs30000048:00040000.262144: rtc core: registered msm_rtc as rtc0
- <6>[ 5.801666] gpio_keys_scan_keys: key 1-116, 0 (46) changed to 0
- <6>[ 5.801818] gpio_keys_scan_keys: key 1-115, 1 (205) changed to 0
- <6>[ 5.802032] gpio_keys_scan_keys: key 1-114, 2 (206) changed to 0
- <6>[ 5.802581] AKM8975 compass driver: init
- <7>[ 5.802703] akm8975_probe:
- <6>[ 5.804199] input: compass as /devices/virtual/input/input5
- <6>[ 5.805480] tpa2051d3_init
- <6>[ 5.805755] adp1650 Led Flash driver: init
- <6>[ 5.806121] isl29028_probe
- <6>[ 5.806243] isl29028_probe: lpi->mapping_size = 0
- <6>[ 5.807189] input: lightsensor-level as /devices/virtual/input/input6
- <6>[ 5.808135] input: proximity as /devices/virtual/input/input7
- <6>[ 5.808715] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da502f1
- <6>[ 5.808898] lightsensor_set_kvalue: als_kadc=0x2f1, als_gadc=0x2f8
- <6>[ 5.809112] lightsensor_update_table: Calibrated adc_table: data[0] = 6
- <6>[ 5.809204] lightsensor_update_table: Calibrated adc_table: data[1] = 3a
- <6>[ 5.809417] lightsensor_update_table: Calibrated adc_table: data[2] = 87
- <6>[ 5.809539] lightsensor_update_table: Calibrated adc_table: data[3] = 488
- <6>[ 5.809722] lightsensor_update_table: Calibrated adc_table: data[4] = 608
- <6>[ 5.809906] lightsensor_update_table: Calibrated adc_table: data[5] = 708
- <6>[ 5.810028] lightsensor_update_table: Calibrated adc_table: data[6] = 808
- <6>[ 5.810241] lightsensor_update_table: Calibrated adc_table: data[7] = 909
- <6>[ 5.810333] lightsensor_update_table: Calibrated adc_table: data[8] = a09
- <6>[ 5.810546] lightsensor_update_table: Calibrated adc_table: data[9] = fff
- <6>[ 5.832763] set_psensor_range: Setting psensor range (0x45, 0x55)
- <6>[ 5.833648] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530c13, ps_kparam2 = 0x140b0c0f
- <6>[ 5.833862] psensor_set_kvalue: PS calibrated ps_B_val = 0xc, ps_C_val = 0x13, ps_A_val = 0x14, ps_X_val = 0xb, ps_lt = 0xc, ps_ht = 0xf
- <6>[ 5.834075] set_psensor_range: Setting psensor range (0xC, 0xF)
- <6>[ 5.835174] isl29028_probe: Probe success!
- <4>[ 5.836090] __ov8810_probe
- <6>[ 5.836425] ov8810_vreg_enable camera vreg on
- <6>[ 5.836517] spade_sensor_vreg_on camera vreg on
- <6>[ 5.838195] sctrl.node 0
- <6>[ 5.838348] ov8810_probe called!
- <6>[ 5.891937] ov8810_probe successed! rc = 0
- <6>[ 5.892272] ov8810 s->node 0
- <6>[ 5.892395] Ov8810: doing clk switch (ov8810)
- <6>[ 5.902496] ov8810_sensor_probe, msm_camio_clk_rate_set 24000000
- <6>[ 6.042449] ov8810_probe_read_id, ov8810_probe_init_sensor 1
- <6>[ 6.042785] ov8810 model_id + ver = 0x8813
- <6>[ 6.042999] ov8810_probe_read_id, Expected id=0x8810
- <6>[ 6.043090] ov8810_probe_read_id, vreg_get vreg_af_actuator
- <6>[ 6.043304] ov8810_probe_init_sensor finishes
- <6>[ 6.093505] ov8810:kobject creat and add
- <6>[ 6.093627] Ov8810:sysfs_create_file
- <6>[ 6.093841] ov8810_sensor_probe: ov8810_probe_init_done 2695
- <4>[ 6.095336] __s5k3h1gx_probe
- <6>[ 6.095458] __s5k3h1gx_probe camera main get probed already.
- <6>[ 6.096374] msm_gemini_init gemini: success
- <6>[ 6.096679] Driver for 1-wire Dallas network protocol.
- <6>[ 6.097290] [ds2746_batt]ds2746_battery_init
- <6>[ 6.097503] [ds2746_batt] ds2746_battery_prob
- <6>[ 6.097808] batt: ds2784_notify: 0 1 at 2175802451 (1970-01-01 00:00:02.175710988 UTC)
- <6>[ 6.098022] batt: charger ON (SLOW) at 2176137817 (1970-01-01 00:00:02.175924402 UTC)
- <6>[ 6.098327] batt: charging SLOW
- <4>[ 6.099365] [D:BATT]Use default(300 Kohm) thermal resistance
- <6>[ 6.100006] device-mapper: uevent: version 1.0.3
- <6>[ 6.100708] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
- <6>[ 6.100952] Bluetooth: HCI UART driver ver 2.2
- <6>[ 6.101074] Bluetooth: HCI H4 protocol initialized
- <6>[ 6.101257] Bluetooth: HCILL protocol initialized
- <6>[ 6.101379] perflock_notifier_call: cpufreq lock speed 1024000
- <6>[ 6.101593] active perf lock 'boot-time'
- <3>[ 6.102447] mmc0: No card detect facilities available
- <6>[ 6.103027] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 8
- <6>[ 6.103210] mmc0: Platform slot type: MMC
- <6>[ 6.103332] mmc0: 4 bit data mode disabled
- <6>[ 6.103546] mmc0: 8 bit data mode enabled
- <6>[ 6.103637] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.103851] mmc0: Slot eject status = 0
- <6>[ 6.103942] mmc0: Power save feature enable = 1
- <6>[ 6.104064] mmc0: DM non-cached buffer at ffa10000, dma_addr 0x17fd3000
- <6>[ 6.104248] mmc0: DM cmd busaddr 0x17fd3000, cmdptr busaddr 0x17fd3300
- <6>[ 6.105194] mmc1: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8
- <6>[ 6.105316] mmc1: Platform slot type: N/A
- <6>[ 6.105438] mmc1: 4 bit data mode enabled
- <6>[ 6.105621] mmc1: 8 bit data mode disabled
- <6>[ 6.105743] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.105926] mmc1: Slot eject status = 1
- <6>[ 6.106048] mmc1: Power save feature enable = 1
- <6>[ 6.106170] mmc1: DM non-cached buffer at ffa11000, dma_addr 0x17df0000
- <6>[ 6.106353] mmc1: DM cmd busaddr 0x17df0000, cmdptr busaddr 0x17df0300
- <6>[ 6.107299] spade_sdslot_switchvdd: Disabling SD slot power
- <6>[ 6.107666] mmc2: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,332 dma 8
- <6>[ 6.107849] mmc2: Platform slot type: SD
- <6>[ 6.107971] mmc2: 4 bit data mode enabled
- <6>[ 6.108062] mmc2: 8 bit data mode disabled
- <6>[ 6.108276] mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
- <6>[ 6.108367] mmc2: Slot eject status = 0
- <6>[ 6.108581] mmc2: Power save feature enable = 1
- <6>[ 6.108673] mmc2: DM non-cached buffer at ffa12000, dma_addr 0x17df3000
- <6>[ 6.108886] mmc2: DM cmd busaddr 0x17df3000, cmdptr busaddr 0x17df3300
- <7>[ 6.110107] Registered led device: amber
- <7>[ 6.110504] Registered led device: green
- <7>[ 6.110870] Registered led device: button-backlight
- <6>[ 6.110992] microp_led_probe: succeeded
- <7>[ 6.111846] Registered led device: keyboard-backlight
- <4>[ 6.113494] [D:BATT] [x0]3 [x8]1e e0 a a0 6b 60 0 21 11 1c
- <4>[ 6.113708] [D:BATT] V=4191(6b6) I=3(8) C=1232.0/1230(111c) id=4(aa) T=250(1ee) KADC=1000
- <4>[ 6.113830] [D:BATT] acr update: P=990, C=4340.
- <6>[ 6.114593] logger: created 64K log 'log_main'
- <4>[ 6.114898] [D:BATT]new RARC=990 C=1217mAh adc=4340.
- <4>[ 6.115081] [D:BATT] state change(0->3), full count=0, over load count=0 [2191]
- <4>[ 6.115203] [D:BATT] state change(3->5), full count=0, over load count=0 [2193]
- <6>[ 6.115417] ds2746_batt:__update_capacity start
- <6>[ 6.115509] batt: charging SLOW
- <4>[ 6.115722] [D:BATT][5] P=990 cable=10 flags=110 debug=0000 fst_discharge=990/1232 [2193]
- <6>[ 6.115966] logger: created 256K log 'log_events'
- <6>[ 6.116394] logger: created 64K log 'log_radio'
- <6>[ 6.116760] logger: created 64K log 'log_system'
- <4>[ 6.117980] No device for DAI CODEC_DAI
- <4>[ 6.118072] No device for DAI CPU_DAI
- <3>[ 6.118621] msm_soc: create pcms
- <6>[ 6.118927] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- <6>[ 6.120239] ALSA device list:
- <6>[ 6.120330] #0: msm-audio (MSM-CARD)
- <6>[ 6.120513] GACT probability NOT on
- <6>[ 6.120697] Mirror/redirect action on
- <6>[ 6.120819] u32 classifier
- <6>[ 6.120910] Actions configured
- <6>[ 6.121124] Netfilter messages via NETLINK v0.30.
- <6>[ 6.121276] nf_conntrack version 0.5.0 (9967 buckets, 39868 max)
- <4>[ 6.121704] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 6.121826] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 6.122009] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>[ 6.122344] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 6.122680] xt_time: kernel timezone is -0000
- <6>[ 6.122985] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 6.123291] arp_tables: (C) 2002 David S. Miller
- <6>[ 6.123474] TCP cubic registered
- <6>[ 6.123748] NET: Registered protocol family 10
- <6>[ 6.124389] lo: Disabled Privacy Extensions
- <6>[ 6.125671] Mobile IPv6
- <6>[ 6.125793] IPv6 over IPv4 tunneling driver
- <6>[ 6.126739] sit0: Disabled Privacy Extensions
- <6>[ 6.127441] ip6tnl0: Disabled Privacy Extensions
- <6>[ 6.127746] NET: Registered protocol family 17
- <6>[ 6.127899] NET: Registered protocol family 15
- <6>[ 6.128112] Bluetooth: L2CAP ver 2.14
- <6>[ 6.128326] Bluetooth: L2CAP socket layer initialized
- <6>[ 6.128448] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 6.128631] Bluetooth: SCO socket layer initialized
- <6>[ 6.128814] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 6.128936] Bluetooth: RFCOMM socket layer initialized
- <6>[ 6.129119] Bluetooth: RFCOMM ver 1.11
- <6>[ 6.129241] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 6.129425] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 6.129760] ThumbEE CPU extension supported.
- <6>[ 6.130371] clock_late_init() disabled 19 unused clocks
- <6>[ 6.130981] [Port list] init()
- <6>[ 6.131835] [voice.c:voice_init] voice_init
- <6>[ 6.132049] dev_state -> DEV_INIT
- <6>[ 6.132293] voc_state -> VOICE_INIT
- <6>[ 6.132720] [voice] send CMD_ACQUIRE_INIT
- <6>[ 6.133666] VFP support v0.3: implementor 51 architecture 64 part 0f variant 1 rev 0
- <6>[ 6.134033] [voice.c:voice_thread] voice_thread() start
- <6>[ 6.137207] kgsl mmu config 0x1555551
- <6>[ 6.139251] rs30000048:00040000 rs30000048:00040000.262144: setting system clock to 2011-03-23 14:27:01 UTC (1300890421)
- <4>[ 6.139526] Warning: unable to open an initial console.
- <6>[ 6.139709] Freeing init memory: 184K
- <6>[ 6.263610] mmc0: new high speed MMC card at address 0001
- <6>[ 6.266113] mmcblk0: mmc0:0001 SEM04G 2.17 GiB
- <6>[ 6.266540] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 >
- <6>[ 6.371704] spade_sdslot_switchvdd: Setting level to 2900
- <6>[ 6.383239] keychord: using input dev h2w headset for fevent
- <6>[ 6.383483] keychord: using input dev spade-keypad-v0 for fevent
- <6>[ 6.388031] EXT4-fs (mmcblk0p25): INFO: recovery required on readonly filesystem
- <6>[ 6.388458] EXT4-fs (mmcblk0p25): write access will be enabled during recovery
- <6>[ 6.443603] spade_sdslot_switchvdd: Setting level to 2850
- <6>[ 6.496887] EXT4-fs (mmcblk0p25): orphan cleanup on readonly fs
- <7>[ 6.497314] EXT4-fs (mmcblk0p25): ext4_orphan_cleanup: deleting unreferenced inode 198
- <6>[ 6.499359] EXT4-fs (mmcblk0p25): 1 orphan inode deleted
- <6>[ 6.499755] EXT4-fs (mmcblk0p25): recovery complete
- <6>[ 6.514984] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1
- <4>[ 6.641662] mmc2: host does not support reading read-only switch. assuming write-enable.
- <6>[ 6.641876] mmc2: new high speed SDHC card at address b368
- <6>[ 6.642486] mmcblk1: mmc2:b368 G5105 7.45 GiB
- <6>[ 6.642913] mmcblk1: p1
- <6>[ 7.282257] EXT4-fs (mmcblk0p26): recovery complete
- <6>[ 7.284851] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- <6>[ 7.309844] EXT4-fs (mmcblk0p27): recovery complete
- <6>[ 7.312408] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1
- <6>[ 7.414367] EXT4-fs (mmcblk0p28): recovery complete
- <6>[ 7.416229] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1
- <3>[ 7.681396] init: service 'console' requires console
- <6>[ 7.690460] enabling adb
- <6>[ 7.690612] hsusb: ONLINE -> RESET
- <6>[ 7.690734] msm_hsusb: disable pullup
- <6>[ 7.690917] hsusb: reset controller
- <6>[ 7.702667] adb_open
- <6>[ 7.730133] msm_hsusb_phy_reset
- <7>[ 7.845092] akmd_open:
- <7>[ 7.855682] AKECS_GetOpenStatus:
- <6>[ 7.873901] msm72k_udc: ulpi: write 0x06 to 0x36
- <6>[ 7.873992] msm72k_udc: ulpi: write 0x0c to 0x31
- <6>[ 7.874206] msm72k_udc: ulpi: write 0x31 to 0x32
- <6>[ 7.874298] msm72k_udc: ulpi: write 0x01 to 0x0d
- <6>[ 7.874420] msm72k_udc: ulpi: write 0x01 to 0x10
- <6>[ 7.874633] usb: notify offline
- <6>[ 7.874786] msm_hsusb: enable pullup
- <6>[ 7.874908] hsusb: RESET -> ONLINE
- <6>[ 7.875213] adb_release
- <6>[ 7.875579] adb_open
- <6>[ 7.877899] msm72k_udc: usb: suspend
- <6>[ 7.992584] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[ 8.075012] msm72k_udc: usb: reset
- <6>[ 8.077392] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 8.102294] SMD: ch 0 0 -> 1
- <6>[ 8.102478] SMD: ch 39 0 -> 1
- <6>[ 8.102600] SMD: ch 0 1 -> 2
- <6>[ 8.102783] SMD: ch 39 1 -> 2
- <6>[ 8.102905] qmi: smd opened
- <6>[ 8.103057] SMD: ch 40 0 -> 1
- <6>[ 8.103179] SMD: ch 41 0 -> 1
- <6>[ 8.103393] SMD: ch 40 1 -> 2
- <6>[ 8.103485] qmi: smd opened
- <6>[ 8.103607] SMD: ch 41 1 -> 2
- <6>[ 8.103698] qmi: smd opened
- <6>[ 8.104919] qmi: ctl: wds use client_id 0x01
- <6>[ 8.105072] qmi: ctl: wds use client_id 0x01
- <6>[ 8.105194] qmi: ctl: wds use client_id 0x01
- <6>[ 8.200103] msm72k_udc: usb: reset
- <6>[ 8.202392] msm72k_udc: usb: portchange USB_SPEED_HIGH
- <6>[ 8.359863] android_usb gadget: high speed config #1: android
- <6>[ 8.360107] adb_function_set_alt: maxsize = 512
- <6>[ 8.360321] ums: set state 1
- <6>[ 8.437469] htc-acoustic: open
- <6>[ 8.437591] htc-acoustic: support_a1026: 0
- <6>[ 8.437713] htc-acoustic: release
- <6>[ 8.442596] htc-acoustic: open
- <6>[ 8.442871] htc-acoustic: setting size = 31854
- <6>[ 8.445556] htc-acoustic: Update adie (media) of handset_rx
- <6>[ 8.445983] htc-acoustic: Update adie (voice) of handset_rx
- <6>[ 8.446319] htc-acoustic: Update adie (media) of handset_tx
- <6>[ 8.446746] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.447113] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.447540] htc-acoustic: Update adie (media) of handset_tx
- <6>[ 8.447875] htc-acoustic: Update adie (voice) of handset_tx
- <6>[ 8.448364] htc-acoustic: Update adie (media) of headset_stereo_rx
- <6>[ 8.448730] htc-acoustic: Update adie (voice) of headset_stereo_rx
- <6>[ 8.449157] htc-acoustic: Update adie (media) of headset_mono_tx
- <6>[ 8.449462] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.449859] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.450195] htc-acoustic: Update adie (media) of headset_mono_tx
- <6>[ 8.450592] htc-acoustic: Update adie (voice) of headset_mono_tx
- <6>[ 8.450866] htc-acoustic: Update adie (media) of speaker_mono_rx
- <6>[ 8.451263] htc-acoustic: Update adie (voice) of speaker_mono_rx
- <6>[ 8.451599] htc-acoustic: Update adie (media) of speaker_mono_tx
- <6>[ 8.451965] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.452362] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.452667] htc-acoustic: Update adie (media) of speaker_mono_tx
- <6>[ 8.453063] htc-acoustic: Update adie (voice) of speaker_mono_tx
- <6>[ 8.453399] htc-acoustic: Update adie (voice) of tty_headset_mono_rx
- <6>[ 8.453796] htc-acoustic: Update adie (voice) of tty_headset_mono_rx
- <6>[ 8.454132] htc-acoustic: Update adie (voice) of tty_headset_mono_tx
- <6>[ 8.455749] htc-acoustic: Update adie (voice) of tty_headset_mono_tx
- <3>[ 8.456054] htc-acoustic: can't find device with frequency 8000
- <6>[ 8.456604] htc-acoustic: Update adie (media) of fmradio_speaker_rx
- <6>[ 8.456970] htc-acoustic: Update adie (media) of headset_speaker_stereo_rx
- <3>[ 8.457427] htc-acoustic: can't find registry device with name fmtx_headset
- <6>[ 8.461151] htc-acdb: open
- <6>[ 8.461303] htc_acdb_open: smem size 327680
- <6>[ 8.462951] htc-acoustic: release
- <6>[ 8.467742] htc-acoustic: open
- <6>[ 8.467864] htc-acoustic: support_aic3254: 1
- <6>[ 8.468353] htc-acoustic: release
- <6>[ 8.468719] htc-acoustic: open
- <6>[ 8.468933] htc-acoustic: support_back_mic: 0
- <6>[ 8.469329] htc-acoustic: release
- <6>[ 8.469543] htc-acoustic: open
- <6>[ 8.469757] spade_get_acoustic_tables: system_rev 129
- <6>[ 8.469848] htc-acoustic: release
- <6>[ 8.470153] htc-acoustic: open
- <6>[ 8.470367] htc-acoustic: support_back_mic: 0
- <6>[ 8.470489] htc-acoustic: release
- <6>[ 8.476470] aic3254_ioctl: parameters(64, 1024, 806041a0)
- <6>[ 8.477081] aic3254_config: size = 23
- <6>[ 8.477386] msm_spi_clock_set: 9963243
- <6>[ 8.895019] aic3254_config: size = 1
- <6>[ 8.895233] aic3254_ioctl: update table(64,1024) successfully
- <6>[ 8.895385] aic3254_ioctl: parameters(64, 1024, 806341a8)
- <6>[ 8.895935] aic3254_ioctl: update table(64,1024) successfully
- <6>[ 8.896087] htc-acoustic: open
- <6>[ 8.896301] spade_get_acoustic_tables: system_rev 129
- <6>[ 8.896423] htc-acoustic: release
- <6>[ 9.389495] aic3254_ioctl: parameters(26, 16384, 806641b4)
- <6>[ 9.391876] aic3254_ioctl: update table(26,16384) successfully
- <6>[ 9.413726] aic3254_ioctl: index 25 for 40047321
- <6>[ 9.413940] aic3254_set_config: table(0x40047321) index(25)
- <4>[ 9.414123] aic3254_set_config: enable CLK
- <6>[ 9.414306] aic3254_set_config: miniDSP command len = 32
- <6>[ 9.414428] aic3254_set_config: rx mode 29, tx mode 29
- <6>[ 9.414520] aic3254_config: size = 32
- <6>[ 9.426086] aic3254_set_config: configure minidsp done
- <6>[ 9.426330] aic3254_ioctl: index 15 for 40047312
- <6>[ 9.426544] aic3254_set_config: table(0x40047312) index(15)
- <6>[ 9.426635] aic3254_set_config: enable tx
- <6>[ 9.426757] spade_tx_amp_enable 0
- <6>[ 9.426971] spade_mic_enable: 0, shift 0
- <6>[ 9.427062] aic3254_config: size = 23
- <6>[ 9.427642] aic3254_config: size = 20
- <6>[ 9.428161] spade_tx_amp_enable 1
- <6>[ 9.428283] spade_mic_enable: 1, shift 0
- <6>[ 9.429382] [ALSA] msm_set_voice_rx_vol: volume 100
- <6>[ 12.848083] msmfb: pan_update in state(1)
- <6>[ 12.848114] msmfb: full update starting
- <6>[ 12.911590] msmfb: full update completed
- <6>[ 12.911743] msmfb: turning on panel
- <6>[ 12.911865] lcdc_unblank: ()
- <4>[ 12.911956] [lcm]spade_sharp_panel_unblank
- <6>[ 13.004425] lightsensor_open
- <6>[ 13.004547] lightsensor_ioctl cmd 1
- <6>[ 13.004669] lightsensor_release
- <6>[ 13.004974] psensor_open
- <6>[ 13.005096] psensor_ioctl cmd 1
- <7>[ 13.005310] akm_aot_open:
- <7>[ 13.005432] akm_aot_release:
- <6>[ 13.005676] psensor_ioctl cmd 2
- <6>[ 13.005798] psensor_disable
- <6>[ 13.005889] psensor_disable: already disabled
- <6>[ 13.006011] psensor_release
- <6>[ 13.006195] psensor_disable
- <6>[ 13.006317] psensor_disable: already disabled
- <6>[ 28.570953] [ALSA] msm_set_voice_rx_vol: volume 20
- <6>[ 29.022247] [Vibrator] Thread-43(parent:zygote): vibrates 1 msec
- <6>[ 29.023101] [ATS][set_vibration][successful]
- <6>[ 29.027954] lightsensor_open
- <6>[ 29.028076] lightsensor_ioctl cmd 2
- <6>[ 29.028198] lightsensor_enable
- <6>[ 29.030609] ALS_ADC = 0x008, Level = 1
- <6>[ 29.032958] request_suspend_state: wakeup (3->0) at 25088454891 (2011-03-23 14:27:24.367103660 UTC)
- <6>[ 29.111267] [Vibrator] Thread-43(parent:zygote): vibrates 21 msec
- <6>[ 29.112609] [ATS][set_vibration][successful]
- <7>[ 31.127227] akm_aot_open:
- <7>[ 31.157135] AKECS_GetCloseStatus:
- <6>[ 31.188140] __spi_bma150_set_mode: BMA get into NORMAL mode!
- <6>[ 32.644683] microp_led_pwm_brightness_set, data[1] = 255
- <6>[ 41.426879] phone_call_status_store: phone_call_status 0
- <6>[ 41.427032] phone_call_status_store: phone_call_status 0
- <6>[ 45.067321] [dma.c] msm_datamover_irq_handlerid 8 result not valid4000001
Advertisement
Add Comment
Please, Sign In to add comment