Advertisement
Sunset0412

House CCTV RP

Oct 28th, 2020 (edited)
130
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.71 KB | None | 0 0
  1. Security Information:
  2. Cameras: https://www.amazon.com/ZOSI-16Channel-Security-Surveillance-Weatherproof/dp/B07VTV2WM6/ref=sr_1_4?dchild=1&keywords=cctv+HD&qid=1603733008&refinements=p_36%3A1253507011&rnid=386442011&s=electronics&sr=1-4
  3. CCTV outside and inside the property covering the main doors and entry points, footage is backed up to DVR as well as an external hard drive, the footage is saved every 8 hours. Also accessible via mobile phone ZOSI application, and can be moved around by remote. Cameras also have internal batteries in the case of power cuts.
  4.  
  5.  
  6. Alarm system: https://www.amazon.com/D1D9-Burglar-Wireless-Apartment-Security/dp/B07BRHG4VG/ref=sr_1_6?dchild=1&keywords=alarm+system&qid=1603733690&sr=8-6
  7. Motion sensors and door contacts have batteries that last 2 years before needing to be changed, when set off it activates the wired siren as well as text Rico Evans mobile phone. Remote controlled to deactivate.
  8.  
  9. Motion sensors are placed by the front door, back wall on ground floor, and windows of second floor. Cameras are placed by the front door inside and the back wall. Exterior cameras are placed around the vicinity to cover all angles as much as possible.
  10.  
  11.  
  12. Setup of DVR:
  13. Oct 27, 2020 14:23:48 Player /me Rico Evans reaches for the ZOSI Security box set, as he places the boxes of CCTV Cameras on top before lifting it out of the trunk of the car, shutting the boot awkwardly with his elbow.
  14. Oct 27, 2020 14:27:19 Player /me Rico Evans climbs down the stairs carefully whilst carrying the boxes, placing them onto the floor of the Office as he then reaches for the DVR box, using a stanley to cut the tape holding both ends of the box before unpacking it.
  15. Oct 27, 2020 14:27:58 Player /me Rico Evans sits the DVR under the table right by the computer tower as he unwinds the ethernet cable, attaching it to the back of the DVR, with the other end going to the router.
  16. Oct 27, 2020 14:29:10 Player /me Rico Evans uses the remote to turn the DVR on, pressing the menu button to log in as he then presses OK on the DVR itself, before submitting an admin password that is 24 digits long.
  17. Oct 27, 2020 14:29:32 Player /me Rico Evans scrolls through the DVR system menu, selecting External Device before selecting TCP/IP Setup.
  18. Oct 27, 2020 14:29:52 Player /me Rico Evans selects DHCP setup from the menu selection, pressing Enter as he then confirms the DHCP mode to automatic.
  19. Oct 27, 2020 14:30:56 Player /me Rico Evans selects Detect IP as he then presses enter on the remote.
  20. Oct 27, 2020 14:32:22 Player /do Rico Evans The screen would refresh and populate with an IP address.
  21. Oct 27, 2020 14:32:41 Player /me Rico Evans notes down the IP address as he then selects DCHP mode, pressing OK, ensuring the mode is changed to Manual.
  22. Oct 27, 2020 14:33:12 Player /do Rico Evans This will ensure that the DVR will be assigned the same IP as the router it is connected to in the case of a power cut where the IP would be lost if this wasn't setup.
  23. Oct 27, 2020 14:33:32 Player /me Rico Evans presses the Menu button once to return the TCP/IP setup screen.
  24. Oct 27, 2020 14:34:00 Player /me Rico Evans looks at the screen as he then selects IP config setup, pressing enter as he then confirms the port number of the DVR, ensuring it is Port 8000.
  25. Oct 27, 2020 14:34:28 Player /me Rico Evans presses the menu several times until it exits the DVR menu system, allowing him to see the live view of the cameras.
  26. Oct 27, 2020 14:34:38 Player /do Rico Evans This setup will allow Rico to now be able to view the cameras remotely.
  27. Oct 27, 2020 14:36:31 Player /me Rico Evans attaches an HDMI cable from the DVR to his PC monitor, setting it up as an external screen in order to see the live footage easier, as he then turns the PC on, setting up the CCTV footage as he inserts the IP of the DVR.
  28. Oct 27, 2020 14:37:00 Player /me Rico Evans flicks through the CCTV software, setting up so the footage backs up every 8 hours to the DVR hard drive, as he then plugs in an external hard drive to the tower as a seperate backup.
  29. Oct 27, 2020 14:37:25 Player /do Rico Evans Footage would automatically be overwritten on the hard drives after 7 days as the DVR and the external would both be 4TB of storage.
  30. Oct 27, 2020 14:39:09 Player /me Rico Evans opens up the box of the POE switch as he unwinds another ethernet cable, plugging it into the back of the router as he then plugs the power cable into the switch, setting the POE out of the way by a cabinet so it is tucked away.
  31.  
  32.  
  33.  
  34.  
  35.  
  36.  
  37.  
  38. Interior cameras:
  39. Oct 27, 2020 16:08:22 Player /me Rico Evans picks up four CCTV Camera boxes from the floor, as he carries them up the stairs setting them down by the front door as he then kneels beside them using a Stanley knife to break the seals.
  40. Oct 27, 2020 16:09:01 Player /me Rico Evans sets his toolbox onto the floor as he opens it up, running a finger by the drill pieces as he selects a small-headed drill head, slotting it into the drill as he twists it to secure the piece.
  41. Oct 27, 2020 16:10:03 Player /me Rico Evans stands up as he grabs a step ladder, climbing up halfway as he rests his left hand against the wall, marking with a pen four crosses equal length apart for the camera mount.
  42. Oct 27, 2020 16:10:34 Player /me Rico Evans keeps his hand against the wall as he uses the drill to carefully drill the four marked holes out, applying slight pressure.
  43. Oct 27, 2020 16:11:11 Player /me Rico Evans blows the dust out from the holes as he checks there are no obstructions, before setting the drill down, grabbing one of the cameras as he plugs an ethernet cable into the back of it, letting it hang down as he holds the camera and its mount to the wall
  44. Oct 27, 2020 16:12:26 Player /me Rico Evans slots a screw through the wall mount and into the hole of the wall, twisting it in a clockwise direction to tighten it in place before slotting the other three screws in, doing them up with his hand.
  45. Oct 27, 2020 16:14:46 Player /me Rico Evans reaches for his screwdriver in his back pocket, connecting it up to each screw in turn as he tightens them up fully, ensuring the ethernet cable is still hanging down out of the way.
  46. Oct 27, 2020 16:16:31 Player /me Rico Evans steps off the step ladder as he then reaches up to move the camera head so it is covering the entrance and hallway.
  47. Oct 27, 2020 16:18:03 Player /me Rico Evans lifts the step ladders up as he moves over to the back of the lounger, setting them against the wall as he draws his pencil from his pocket.
  48. Oct 27, 2020 16:19:10 Player /me Rico Evans climbs up the ladder as he leans his arm against the wall, marking two crosses on each wall for the camera mount to be against the corner.
  49. Oct 27, 2020 16:20:52 Player /me Rico Evans checks that the holes are the right length apart as he then slips the pencil back into his pocket, picking up his drill as he then drills the holes out carefully, adjusting his grip on the drill for the weird angles.
  50. Oct 27, 2020 16:21:26 Player /me Rico Evans runs a finger along the drilled out holes, picking out some of the plaster from the holes as he then climbs down, picking out a camera from its box as he plugs the ethernet cable in, threading it through the mount.
  51. Oct 27, 2020 16:21:54 Player /me Rico Evans steps back onto the ladder as he holds the camera in place, using an electric screwdriver to screw each screw into the wall and through the mount, keeping the camera in place.
  52. Oct 27, 2020 16:22:24 Player /me Rico Evans moves the camera head so it is covering the back windows of the house, nodding briefly as he steps back, ensuring the cable is hanging down.
  53. Oct 27, 2020 16:23:07 Player /me Rico Evans reaches for the cable as he aligns it against the wall, using stick-on cable management ties as he keeps the cable in line, plugging the end into an ethernet port that is built into the wall.
  54. Oct 27, 2020 16:23:49 Player /me Rico Evans checks that the cable is tidy as he then grabs some cable truncheon, placing the cable into it as he then seals the lid on top, peeling the backing off as he sticks it onto the wall.
  55. Oct 27, 2020 16:24:11 Player /me Rico Evans unravels the power plug as he connects it to the camera, plugging the other end into the wall as he then places the cable into the truncheon out of the way.
  56. Oct 27, 2020 16:24:50 Player /me Rico Evans uses a flathead screwdriver to lift the side panel of the camera, putting in a lithium battery as an external power source in case the power gets tripped.
  57. Oct 27, 2020 16:25:06 Player /me Rico Evans grins as he looks at the camera, pleased at his handy work as he then moves back to the camera at the front of the house, plugging the ethernet cable hanging down from it into the ethernet port in the wall, before plugging its power cable into it
  58. Oct 27, 2020 16:25:16 Player /do Rico Evans switching the plug on.
  59. Oct 27, 2020 16:25:25 Player /me Rico Evans inserts a lithium battery into the camera as he then slots the flap back into place.
  60. Oct 27, 2020 16:25:35 Player /me Rico Evans goes back down the stairs into the office as he checks that the POE switch is on, placing an ethernet cable into the POE switch and into a wall port.
  61. Oct 27, 2020 16:26:40 Player /me Rico Evans logs into the computer and then into the DVR software, checking that the cameras are switched on and loaded in properly, using the mouse to test that the cameras can turn properly before realigning them.
  62.  
  63.  
  64. Exterior Cameras:
  65.  
  66.  
  67. Oct 28, 2020 20:05:01 Player /me Rico Evans grabs his toolkit as he walks to the front of the house, shutting the front door behind him as he sets up the step ladder to rest against the wall.
  68. Oct 28, 2020 20:05:13 Player /me Rico Evans opens up the toolkit as he grabs a small drill piece, fitting it onto the drill before lightly pressing down on the trigger to check it works.
  69. Oct 28, 2020 20:05:35 Player /me Rico Evans gets onto the step ladder, keeping his weight balanced as he drills out four holes equal width apart for the camera mount, before drilling out a larger hole in the centre for the cabling.
  70. Oct 28, 2020 20:05:41 Player /do Rico Evans The middle hole would go through to the other side of the wall.
  71. Oct 28, 2020 20:05:46 Player /me Rico Evans blows firmly at the wall to clear the dust and plaster, as he checks the measurements before getting down off the stepladder.
  72. Oct 28, 2020 20:05:52 Player /me Rico Evans reaches for one of the CCTV Camera’s, plugging in an ethernet cable into the back of the camera alongside the power cable as he then uses a small flathead screwdriver to lift the flap of the battery compartment up.
  73. Oct 28, 2020 20:05:57 Player /me Rico Evans inserts a lithium battery into the compartment as he then pulls out the small white tab that is in place to activate the battery, closing the flap afterwards.
  74. Oct 28, 2020 20:06:07 Player /me Rico Evans threads the wires through the hole in the wall as he then aligns the mount up against the holes in the wall, keeping hold of it with his right hand as he uses his left to insert the screws into each hole.
  75. Oct 28, 2020 20:06:19 Player /me Rico Evans turns the screws in a clockwise motion using his fingers until the mount is secured onto the wall.
  76. Oct 28, 2020 20:07:15 Player /me Rico Evans reaches with his right hand for the screwdriver protruding from his pocket as he connects it to each screw in turn, tightening them up until they are fully in and secure.
  77. Oct 28, 2020 20:07:25 Player /me Rico Evans tugs gently onto the camera ensuring it is fully in place as he then gets off the step ladder, briefly adjusting the camera so it covers a wider area.
  78. Oct 28, 2020 20:07:34 Player /me Rico Evans places the drill back into the toolkit as he picks up, carrying it alongside a few more boxes of the cameras as he heads towards the back of the house.
  79. Oct 28, 2020 20:08:01 Player /me Rico Evans carefully climbs up the ladder that is against the wall as he unlocks his toolbox, taking out the drill as he switches the drill head for a slightly thicker piece, using the drill to drill out four holes equal width apart in a square.
  80. Oct 28, 2020 20:08:14 Player /me Rico Evans checks that the holes are clear before drilling out a larger hole all the way through the wall for the cabling.
  81. Oct 28, 2020 20:08:31 Player /me Rico Evans sets the drill down as he grabs hold of one of the CCTV camera boxes, taking out the camera as he slides four screws, one in each hole of the mount.
  82. Oct 28, 2020 20:08:42 Player /me Rico Evans unwinds the ethernet cable and power cable for the cable, plugging both into the back of the camera before inserting a lithium battery into its battery compartment.
  83. Oct 28, 2020 20:08:53 Player /me Rico Evans climbs back up the ladder as he holds the camera mount over the four holes, pushing the ethernet cable and power cable through the hole in the middle ensuring its all the way through.
  84. Oct 28, 2020 20:09:04 Player /me Rico Evans maintains his grip on the camera as he levels the camera up along the four holes in the wall, placing the screws in the mount into each hole as he tightens each one into the hole by hand.
  85. Oct 28, 2020 20:09:47 Player /me Rico Evans reaches for the screwdriver in his pocket as he tightens each screw up so the camera is held securely to the wall.
  86. Oct 28, 2020 20:09:54 Player /me Rico Evans carefully picks up his toolkit and the empty box of the camera, climbing back down the ladder from the balcony.
  87. Oct 28, 2020 20:10:05 Player /me Rico Evans walks over to the other side of the house as he sets the ladder against the wall, using a lever to adjust the height of the ladder.
  88. Oct 28, 2020 20:10:14 Player /me Rico Evans places the empty camera box out of the way as he grabs his drill once more, cleaning the drill head as he then gets back onto the ladder.
  89. Oct 28, 2020 20:10:24 Player /me Rico Evans aligns the drill head up to the top left hole as he carefully drills it out before drilling the rest of the holes, ensuring that the one in the middle has gone all the way through the wall for the cables.
  90. Oct 28, 2020 20:10:35 Player /me Rico Evans jumps down from the ladder as he sets the drill to the side, picking out a camera from its box as he inserts the ethernet cable and power cable into the ports on the back of the camera.
  91. Oct 28, 2020 20:11:08 Player /me Rico Evans uses a flathead screwdriver to lift the battery compartment up, placing in a lithium battery for external power as he then places the compartment lid back, applying slight pressure until it clicks into place.
  92. Oct 28, 2020 20:11:21 Player /me Rico Evans climbs back up onto the ladder, resting his left foot on the top step as he aligns the camera up with the holes he’s drilled, pushing the cables through the middle hole before sliding screws into each hole in the mount.
  93. Oct 28, 2020 20:11:26 Player /me Rico Evans uses his right hand to keep hold of the camera in place as he uses his left to rotate the screws in a clockwise motion to tighten them, securing the mount in place.
  94. Oct 28, 2020 20:11:33 Player /me Rico Evans lets go of the camera once it’s in place, using a screwdriver to tighten up each screw until they are unable to rotate any further as he then moves the camera head to cover a better angle.
  95. Oct 28, 2020 20:11:42 Player /me Rico Evans steps down from the ladder as he slips the screwdriver back into his pocket, checking that the camera is facing the right way as he then puts the drill away, walking back inside the house.
  96. Oct 28, 2020 20:11:48 Player /me Rico Evans walks over the some of the cables protruding from one of the cameras as he plugs the ethernet cable into the wall port, before plugging in the power cable into the extension lead, flicking it on.
  97. Oct 28, 2020 20:12:04 Player /me Rico Evans grabs some cable truncheon, peeling off the sticky tape on the back as he sticks it onto the wall before guiding the cables into it to keep them neat and tidy, pressing the cover of the truncheon back on.
  98. Oct 28, 2020 20:12:13 Player /me Rico Evans walks over to each set of cables that are from the exterior cameras, plugging them into the relevant socks as he then uses cable ties and cable truncheon to clean up the cables, ensuring they are neat and out of the way.
  99. Oct 28, 2020 20:12:27 Player /me Rico Evans walks down the stairs as he logs back into the Computer, loading up the DVR software as he checks each camera is online.
  100. Oct 28, 2020 20:12:32 Player /me Rico Evans installs the ZOSI Smart app on his phone as he inputs the IP of the cameras into it, watching them appear online on his phone as he then sets up motion detection to alert his phone.
  101. Oct 28, 2020 20:12:38 Player /me Rico Evans reaches for the mouse of the computer as he then checks to ensure the backup protocol is set to back up every 8 hours to the hard drive of the DVR as well as the external USB hard drive that is plugged in.
  102. Oct 28, 2020 20:12:41 Player /me Rico Evans locks the computer as he then turns the monitor off to consume power.
  103.  
  104.  
  105.  
  106. Alarms and motion sensors:
  107.  
  108. Oct 28, 2020 20:13:00 Player /me Rico Evans takes out the D1D9 Burglar Alarm Wireless DIY GSM System box as he begins to unpack it, using a Stanley knife to cut through any protective seals.
  109. Oct 28, 2020 20:13:09 Player /do Rico Evans The box would contain 12 door contacts, 1 wired siren, 1 power supply, 1 main unit, 4 remote controls, PIRX5.
  110. Oct 28, 2020 20:13:19 Player /me Rico Evans reaches for the main unit as he walks into the bedroom, aligning it up against the wall as he marks where the places to drill to mount it into place.
  111. Oct 28, 2020 20:13:28 Player /me Rico Evans sets the unit aside as he then slides the locks of his toolbox to the left, unlocking it as he raises the lid up, grabbing the drill as he inserts a medium-sized drill piece into the top, twisting it to the right to lock it in place.
  112. Oct 28, 2020 20:13:39 Player /me Rico Evans drills out the four holes in the wall for the main unit, before setting the drill-down and picking up four screws, inserting the screws through the holes in each corner of the main unit.
  113. Oct 28, 2020 20:14:30 Player /me Rico Evans holds the unit up to the wall as he lines up the holes to the ones in the wall, screwing the screws in place with an electric screwdriver as he then gently tugs to ensure it’s secure.
  114. Oct 28, 2020 20:15:42 Player /me Rico Evans opens up the side flap of the panel as he places the battery in, slotting it in place before unwinding the power cable and plugging it into the side of the unit and then the other part into the plug socket in the wall.
  115. Oct 28, 2020 20:15:49 Player /do Rico Evans The battery would be there for external power source if the power died.
  116. Oct 28, 2020 20:16:14 Player /me Rico Evans slides the screwdriver back into his pocket as he then takes one of the door contacts out of the box, walking back up the stairs.
  117. Oct 28, 2020 20:16:20 Player /me Rico Evans turns the door contact over as he then removes the small tab insert to activate the lithium battery of the contact.
  118. Oct 28, 2020 20:17:08 Player /me Rico Evans peels off the adhesive backing from the door contact as he sticks one side onto the wall and the other side to the door, checking that the two connect when the door is closed.
  119. Oct 28, 2020 20:17:43 Player /me Rico Evans adjusts the alignment slightly, opening and closing the door a few times to check that it fits properly.
  120. Oct 28, 2020 20:17:51 Player /me Rico Evans picks out the PIR motion detector from the boxset as he removes the insert in the battery compartment to activate the battery.
  121. Oct 28, 2020 20:18:30 Player /me Rico Evans walks over to the back wall as he peels off the adhesive sticker from the back of the motion detector, sticking it to the back wall as he presses it down.
  122. Oct 28, 2020 20:18:36 Player /me Oct 28, 2020 20:19:55 Player /me Rico Evans goes back to the boxset as he takes out the wired siren, climbing back down the stairs into the bedroom as he sits down onto the bed. Rico Evans checks that the motion detector is on firmly before stepping away.
  123. Oct 28, 2020 20:20:02 Player /me Rico Evans takes out a pair of wirecutters as he strips the ends of the wires from the siren, exposing the copper underneath as he then wires it up to the main unit, securing the ends into the ports.
  124. Oct 28, 2020 20:20:26 Player /me Rico Evans holds the siren above the unit as he then screws it into the wall using an electric screwdriver, securing it into place.
  125. Oct 28, 2020 20:20:35 Player /me Rico Evans takes out the power supply as he plugs the connection into the side of the siren, before plugging it into the wall socket and turning it on.
  126. Oct 28, 2020 20:22:33 Player /me Rico Evans checks that the siren is connected properly as he then takes out another PIR motion detector, removing the battery tab insert to activate the battery inside as he then removes the sticky backing to it, placing the sensor by the bedroom windows.
  127. Oct 28, 2020 20:23:06 Player /me Rico Evans ensures the sensor it’s on as he then grabs another motion sensor, jogging back up the stairs as he uses his forefinger and thumb to remove the insert from the battery.
  128. Oct 28, 2020 20:24:29 Player /me Rico Evans glances around the house looking at where to put the sensor as he then places it by the front door, pulling the sticky backing off as he sticks it to the wall.
  129. Oct 28, 2020 20:24:45 Player /me Rico Evans steps back to check that the sensor is on as he then goes back down the stairs to the main unit, typing in the login code.
  130. Oct 28, 2020 20:25:51 Player /me Rico Evans sets up the main unit to link with his phone, including sending SMS and an alarm tone if the sensors and alarms are activated.
  131.  
  132.  
  133.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement