Command "app:enable" is not defined.
Did you mean this?
app:check-code
Tail of curl install Above is output just before nc-init starts It does not seem to effect anything**
Installing nc-update
Installing nc-update-nextcloud
Installing nc-webui
Installing nc-wifi
Ign:1 http://ftp.nl.debian.org/debian stretch InRelease
Hit:2 http://security.debian.org/debian-security stretch/updates InRelease
Hit:3 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libdbus-glib-1-2 libiw30 libnl-3-200 libnl-genl-3-200 libpcsclite1 net-tools python-dbus python-gi
python-gobject python-gobject-2 python-urwid python-wicd wicd-daemon wireless-tools wpasupplicant
Suggested packages:
pcscd python-dbus-dbg python-dbus-doc python-gi-cairo python-gobject-2-dbg pm-utils wpagui
libengine-pkcs11-openssl
Recommended packages:
rfkill
The following NEW packages will be installed:
libdbus-glib-1-2 libiw30 libnl-3-200 libnl-genl-3-200 libpcsclite1 net-tools python-dbus python-gi
python-gobject python-gobject-2 python-urwid python-wicd wicd-curses wicd-daemon wireless-tools
wpasupplicant
0 upgraded, 16 newly installed, 0 to remove and 4 not upgraded.
Need to get 4000 kB of archives.
After this operation, 11,6 MB of additional disk space will be used.
Get:1 http://ftp.nl.debian.org/debian stretch/main amd64 net-tools amd64 1.60+git20161116.90da8a0-1 [248 kB]
Get:2 http://ftp.nl.debian.org/debian stretch/main amd64 libdbus-glib-1-2 amd64 0.108-2 [206 kB]
Get:3 http://ftp.nl.debian.org/debian stretch/main amd64 python-dbus amd64 1.2.4-1+b1 [185 kB]
Get:4 http://ftp.nl.debian.org/debian stretch/main amd64 python-gi amd64 3.22.0-2 [515 kB]
Get:5 http://ftp.nl.debian.org/debian stretch/main amd64 python-gobject-2 amd64 2.28.6-13 [289 kB]
Get:6 http://ftp.nl.debian.org/debian stretch/main amd64 python-gobject all 3.22.0-2 [324 kB]
Get:7 http://ftp.nl.debian.org/debian stretch/main amd64 python-wicd all 1.7.4+tb2-4 [55,0 kB]
Get:8 http://ftp.nl.debian.org/debian stretch/main amd64 libiw30 amd64 30~pre9-12+b1 [21,6 kB]
Get:9 http://ftp.nl.debian.org/debian stretch/main amd64 wireless-tools amd64 30~pre9-12+b1 [114 kB]
Get:10 http://ftp.nl.debian.org/debian stretch/main amd64 libnl-3-200 amd64 3.2.27-2 [61,5 kB]
Get:11 http://ftp.nl.debian.org/debian stretch/main amd64 libnl-genl-3-200 amd64 3.2.27-2 [21,0 kB]
Get:12 http://ftp.nl.debian.org/debian stretch/main amd64 libpcsclite1 amd64 1.8.20-1 [56,5 kB]
Get:13 http://ftp.nl.debian.org/debian stretch/main amd64 wpasupplicant amd64 2:2.4-1+deb9u2 [972 kB]
Get:14 http://ftp.nl.debian.org/debian stretch/main amd64 wicd-daemon all 1.7.4+tb2-4 [162 kB]
Get:15 http://ftp.nl.debian.org/debian stretch/main amd64 python-urwid amd64 1.3.1-2+b1 [718 kB]
Get:16 http://ftp.nl.debian.org/debian stretch/main amd64 wicd-curses all 1.7.4+tb2-4 [52,1 kB]
Fetched 4000 kB in 2s (1523 kB/s)
Preconfiguring packages ...
Selecting previously unselected package net-tools.
(Reading database ... 37047 files and directories currently installed.)
Preparing to unpack .../00-net-tools_1.60+git20161116.90da8a0-1_amd64.deb ...
Unpacking net-tools (1.60+git20161116.90da8a0-1) ...
Selecting previously unselected package libdbus-glib-1-2:amd64.
Preparing to unpack .../01-libdbus-glib-1-2_0.108-2_amd64.deb ...
Unpacking libdbus-glib-1-2:amd64 (0.108-2) ...
Selecting previously unselected package python-dbus.
Preparing to unpack .../02-python-dbus_1.2.4-1+b1_amd64.deb ...
Unpacking python-dbus (1.2.4-1+b1) ...
Selecting previously unselected package python-gi.
Preparing to unpack .../03-python-gi_3.22.0-2_amd64.deb ...
Unpacking python-gi (3.22.0-2) ...
Selecting previously unselected package python-gobject-2.
Preparing to unpack .../04-python-gobject-2_2.28.6-13_amd64.deb ...
Unpacking python-gobject-2 (2.28.6-13) ...
Selecting previously unselected package python-gobject.
Preparing to unpack .../05-python-gobject_3.22.0-2_all.deb ...
Unpacking python-gobject (3.22.0-2) ...
Selecting previously unselected package python-wicd.
Preparing to unpack .../06-python-wicd_1.7.4+tb2-4_all.deb ...
Unpacking python-wicd (1.7.4+tb2-4) ...
Selecting previously unselected package libiw30:amd64.
Preparing to unpack .../07-libiw30_30~pre9-12+b1_amd64.deb ...
Unpacking libiw30:amd64 (30~pre9-12+b1) ...
Selecting previously unselected package wireless-tools.
Preparing to unpack .../08-wireless-tools_30~pre9-12+b1_amd64.deb ...
Unpacking wireless-tools (30~pre9-12+b1) ...
Selecting previously unselected package libnl-3-200:amd64.
Preparing to unpack .../09-libnl-3-200_3.2.27-2_amd64.deb ...
Unpacking libnl-3-200:amd64 (3.2.27-2) ...
Selecting previously unselected package libnl-genl-3-200:amd64.
Preparing to unpack .../10-libnl-genl-3-200_3.2.27-2_amd64.deb ...
Unpacking libnl-genl-3-200:amd64 (3.2.27-2) ...
Selecting previously unselected package libpcsclite1:amd64.
Preparing to unpack .../11-libpcsclite1_1.8.20-1_amd64.deb ...
Unpacking libpcsclite1:amd64 (1.8.20-1) ...
Selecting previously unselected package wpasupplicant.
Preparing to unpack .../12-wpasupplicant_2%3a2.4-1+deb9u2_amd64.deb ...
Unpacking wpasupplicant (2:2.4-1+deb9u2) ...
Selecting previously unselected package wicd-daemon.
Preparing to unpack .../13-wicd-daemon_1.7.4+tb2-4_all.deb ...
Unpacking wicd-daemon (1.7.4+tb2-4) ...
Selecting previously unselected package python-urwid.
Preparing to unpack .../14-python-urwid_1.3.1-2+b1_amd64.deb ...
Unpacking python-urwid (1.3.1-2+b1) ...
Selecting previously unselected package wicd-curses.
Preparing to unpack .../15-wicd-curses_1.7.4+tb2-4_all.deb ...
Unpacking wicd-curses (1.7.4+tb2-4) ...
Setting up python-urwid (1.3.1-2+b1) ...
Setting up libpcsclite1:amd64 (1.8.20-1) ...
Setting up libdbus-glib-1-2:amd64 (0.108-2) ...
Setting up python-wicd (1.7.4+tb2-4) ...
Setting up python-gobject-2 (2.28.6-13) ...
Setting up python-gi (3.22.0-2) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u8) ...
Setting up libiw30:amd64 (30~pre9-12+b1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for dbus (1.10.26-0+deb9u1) ...
Setting up python-dbus (1.2.4-1+b1) ...
Remove stale byte-compiled files...
Setting up libnl-3-200:amd64 (3.2.27-2) ...
Setting up net-tools (1.60+git20161116.90da8a0-1) ...
Setting up wireless-tools (30~pre9-12+b1) ...
Setting up python-gobject (3.22.0-2) ...
Setting up libnl-genl-3-200:amd64 (3.2.27-2) ...
Setting up wpasupplicant (2:2.4-1+deb9u2) ...
Setting up wicd-daemon (1.7.4+tb2-4) ...
Setting up wicd-curses (1.7.4+tb2-4) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for dbus (1.10.26-0+deb9u1) ...
Processing triggers for systemd (232-25+deb9u8) ...
wicd.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable wicd
Installing nc-zram
Installing NFS
Ign:1 http://ftp.nl.debian.org/debian stretch InRelease
Hit:2 http://security.debian.org/debian-security stretch/updates InRelease
Hit:3 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
keyutils libevent-2.0-5 libnfsidmap2 libtirpc1 nfs-common rpcbind
Suggested packages:
open-iscsi watchdog
The following NEW packages will be installed:
keyutils libevent-2.0-5 libnfsidmap2 libtirpc1 nfs-common nfs-kernel-server rpcbind
0 upgraded, 7 newly installed, 0 to remove and 4 not upgraded.
Need to get 718 kB of archives.
After this operation, 2037 kB of additional disk space will be used.
Get:1 http://ftp.nl.debian.org/debian stretch/main amd64 libevent-2.0-5 amd64 2.0.21-stable-3 [152 kB]
Get:2 http://ftp.nl.debian.org/debian stretch/main amd64 libnfsidmap2 amd64 0.25-5.1 [32,0 kB]
Get:3 http://ftp.nl.debian.org/debian stretch/main amd64 libtirpc1 amd64 0.2.5-1.2+deb9u1 [80,6 kB]
Get:4 http://ftp.nl.debian.org/debian stretch/main amd64 keyutils amd64 1.5.9-9 [52,7 kB]
Get:5 http://ftp.nl.debian.org/debian stretch/main amd64 rpcbind amd64 0.2.3-0.6 [46,0 kB]
Get:6 http://ftp.nl.debian.org/debian stretch/main amd64 nfs-common amd64 1:1.3.4-2.1 [231 kB]
Get:7 http://ftp.nl.debian.org/debian stretch/main amd64 nfs-kernel-server amd64 1:1.3.4-2.1 [124 kB]
Fetched 718 kB in 1s (620 kB/s)
Selecting previously unselected package libevent-2.0-5:amd64.
(Reading database ... 37700 files and directories currently installed.)
Preparing to unpack .../0-libevent-2.0-5_2.0.21-stable-3_amd64.deb ...
Unpacking libevent-2.0-5:amd64 (2.0.21-stable-3) ...
Selecting previously unselected package libnfsidmap2:amd64.
Preparing to unpack .../1-libnfsidmap2_0.25-5.1_amd64.deb ...
Unpacking libnfsidmap2:amd64 (0.25-5.1) ...
Selecting previously unselected package libtirpc1:amd64.
Preparing to unpack .../2-libtirpc1_0.2.5-1.2+deb9u1_amd64.deb ...
Unpacking libtirpc1:amd64 (0.2.5-1.2+deb9u1) ...
Selecting previously unselected package keyutils.
Preparing to unpack .../3-keyutils_1.5.9-9_amd64.deb ...
Unpacking keyutils (1.5.9-9) ...
Selecting previously unselected package rpcbind.
Preparing to unpack .../4-rpcbind_0.2.3-0.6_amd64.deb ...
Unpacking rpcbind (0.2.3-0.6) ...
Selecting previously unselected package nfs-common.
Preparing to unpack .../5-nfs-common_1%3a1.3.4-2.1_amd64.deb ...
Unpacking nfs-common (1:1.3.4-2.1) ...
Selecting previously unselected package nfs-kernel-server.
Preparing to unpack .../6-nfs-kernel-server_1%3a1.3.4-2.1_amd64.deb ...
Unpacking nfs-kernel-server (1:1.3.4-2.1) ...
Setting up libnfsidmap2:amd64 (0.25-5.1) ...
Setting up keyutils (1.5.9-9) ...
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Setting up libtirpc1:amd64 (0.2.5-1.2+deb9u1) ...
Processing triggers for systemd (232-25+deb9u8) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libevent-2.0-5:amd64 (2.0.21-stable-3) ...
Setting up rpcbind (0.2.3-0.6) ...
Created symlink /etc/systemd/system/multi-user.target.wants/rpcbind.service → /lib/systemd/system/rpcbind.service.
Created symlink /etc/systemd/system/sockets.target.wants/rpcbind.socket → /lib/systemd/system/rpcbind.socket.
Setting up nfs-common (1:1.3.4-2.1) ...
Creating config file /etc/idmapd.conf with new version
Adding system user statd' (UID 111) ... Adding new userstatd' (UID 111) with group nogroup' ... Not creating home directory/var/lib/nfs'.
Created symlink /etc/systemd/system/multi-user.target.wants/nfs-client.target → /lib/systemd/system/nfs-client.target.
Created symlink /etc/systemd/system/remote-fs.target.wants/nfs-client.target → /lib/systemd/system/nfs-client.target.
nfs-utils.service is a disabled or a static unit, not starting it.
Setting up nfs-kernel-server (1:1.3.4-2.1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/nfs-server.service → /lib/systemd/system/nfs-server.service.
Job for nfs-server.service failed because the control process exited with error code.
See "systemctl status nfs-server.service" and "journalctl -xe" for details.
nfs-server.service couldn't start.
Creating config file /etc/exports with new version
Creating config file /etc/default/nfs-kernel-server with new version
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u8) ...
Synchronizing state of nfs-kernel-server.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable nfs-kernel-server
Removed /etc/systemd/system/multi-user.target.wants/nfs-server.service.
Created symlink /etc/systemd/system/nfs-blkmap.service → /dev/null.
Installing no-ip
Ign:1 http://ftp.nl.debian.org/debian stretch InRelease
Hit:2 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:3 http://security.debian.org/debian-security stretch/updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'libc6-dev' instead of 'libc-dev'
gcc is already the newest version (4:6.3.0-4).
gcc set to manually installed.
libc6-dev is already the newest version (2.24-11+deb9u3).
libc6-dev set to manually installed.
make is already the newest version (4.1-9.1).
make set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
--2019-01-26 11:52:09-- https://github.com/nachoparker/noip-DDNS/archive/master/latest.tar.gz
Resolving github.com (github.com)... 140.82.118.3, 140.82.118.4
Connecting to github.com (github.com)|140.82.118.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/nachoparker/noip-DDNS/tar.gz/master [following]
--2019-01-26 11:52:09-- https://codeload.github.com/nachoparker/noip-DDNS/tar.gz/master
Resolving codeload.github.com (codeload.github.com)... 192.30.253.120, 192.30.253.121
Connecting to codeload.github.com (codeload.github.com)|192.30.253.120|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/x-gzip]
Saving to: ‘STDOUT’
- [ <=> ] 136,62K 388KB/s in 0,4s
2019-01-26 11:52:10 (388 KB/s) - written to stdout [139904]
/tmp/ncp-update.1WQFAR
gcc -Wall -g -Dlinux -DPREFIX=\"/usr/local\" noip2.c -o noip2
noip2.c: In function ‘dynamic_update’:
noip2.c:1595:6: warning: variable ‘i’ set but not used [-Wunused-but-set-variable]
int i, x, is_group, retval, response;
^
noip2.c: In function ‘domains’:
noip2.c:1826:13: warning: variable ‘x’ set but not used [-Wunused-but-set-variable]
int x;
^
noip2.c: In function ‘hosts’:
noip2.c:1838:20: warning: variable ‘y’ set but not used [-Wunused-but-set-variable]
int x, y, z;
^
/tmp/ncp-update.1WQFAR
Installing samba
Hit:1 http://security.debian.org/debian-security stretch/updates InRelease
Ign:2 http://ftp.nl.debian.org/debian stretch InRelease
Hit:3 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
libfile-copy-recursive-perl python-crypto python-dnspython python-ldb python-samba python-tdb samba-common
samba-common-bin tdb-tools update-inetd
Suggested packages:
python-crypto-dbg python-crypto-doc python-gpgme bind9 bind9utils ctdb ldb-tools ntp | chrony
smbldap-tools winbind ufw heimdal-clients
Recommended packages:
attr samba-dsdb-modules samba-vfs-modules
The following NEW packages will be installed:
libfile-copy-recursive-perl python-crypto python-dnspython python-ldb python-samba python-tdb samba
samba-common samba-common-bin tdb-tools update-inetd
0 upgraded, 11 newly installed, 0 to remove and 4 not upgraded.
Need to get 3549 kB of archives.
After this operation, 24,8 MB of additional disk space will be used.
Get:1 http://security.debian.org/debian-security stretch/updates/main amd64 python-samba amd64 2:4.5.12+dfsg-2+deb9u4 [1360 kB]
Get:2 http://ftp.nl.debian.org/debian stretch/main amd64 python-dnspython all 1.15.0-1 [102 kB]
Get:3 http://ftp.nl.debian.org/debian stretch/main amd64 python-crypto amd64 2.6.1-7 [259 kB]
Get:4 http://ftp.nl.debian.org/debian stretch/main amd64 python-ldb amd64 2:1.1.27-1+b1 [35,0 kB]
Get:5 http://ftp.nl.debian.org/debian stretch/main amd64 python-tdb amd64 1.3.11-2 [16,2 kB]
Get:6 http://ftp.nl.debian.org/debian stretch/main amd64 tdb-tools amd64 1.3.11-2 [26,5 kB]
Get:7 http://ftp.nl.debian.org/debian stretch/main amd64 libfile-copy-recursive-perl all 0.38-1 [20,6 kB]
Get:8 http://ftp.nl.debian.org/debian stretch/main amd64 update-inetd all 4.44 [20,8 kB]
Get:9 http://security.debian.org/debian-security stretch/updates/main amd64 samba-common all 2:4.5.12+dfsg-2+deb9u4 [172 kB]
Get:10 http://security.debian.org/debian-security stretch/updates/main amd64 samba-common-bin amd64 2:4.5.12+dfsg-2+deb9u4 [604 kB]
Get:11 http://security.debian.org/debian-security stretch/updates/main amd64 samba amd64 2:4.5.12+dfsg-2+deb9u4 [933 kB]
Fetched 3549 kB in 2s (1658 kB/s)
Preconfiguring packages ...
Selecting previously unselected package python-dnspython.
(Reading database ... 37873 files and directories currently installed.)
Preparing to unpack .../00-python-dnspython_1.15.0-1_all.deb ...
Unpacking python-dnspython (1.15.0-1) ...
Selecting previously unselected package python-crypto.
Preparing to unpack .../01-python-crypto_2.6.1-7_amd64.deb ...
Unpacking python-crypto (2.6.1-7) ...
Selecting previously unselected package python-ldb.
Preparing to unpack .../02-python-ldb_2%3a1.1.27-1+b1_amd64.deb ...
Unpacking python-ldb (2:1.1.27-1+b1) ...
Selecting previously unselected package python-tdb.
Preparing to unpack .../03-python-tdb_1.3.11-2_amd64.deb ...
Unpacking python-tdb (1.3.11-2) ...
Selecting previously unselected package python-samba.
Preparing to unpack .../04-python-samba_2%3a4.5.12+dfsg-2+deb9u4_amd64.deb ...
Unpacking python-samba (2:4.5.12+dfsg-2+deb9u4) ...
Selecting previously unselected package samba-common.
Preparing to unpack .../05-samba-common_2%3a4.5.12+dfsg-2+deb9u4_all.deb ...
Unpacking samba-common (2:4.5.12+dfsg-2+deb9u4) ...
Selecting previously unselected package samba-common-bin.
Preparing to unpack .../06-samba-common-bin_2%3a4.5.12+dfsg-2+deb9u4_amd64.deb ...
Unpacking samba-common-bin (2:4.5.12+dfsg-2+deb9u4) ...
Selecting previously unselected package tdb-tools.
Preparing to unpack .../07-tdb-tools_1.3.11-2_amd64.deb ...
Unpacking tdb-tools (1.3.11-2) ...
Selecting previously unselected package libfile-copy-recursive-perl.
Preparing to unpack .../08-libfile-copy-recursive-perl_0.38-1_all.deb ...
Unpacking libfile-copy-recursive-perl (0.38-1) ...
Selecting previously unselected package update-inetd.
Preparing to unpack .../09-update-inetd_4.44_all.deb ...
Unpacking update-inetd (4.44) ...
Selecting previously unselected package samba.
Preparing to unpack .../10-samba_2%3a4.5.12+dfsg-2+deb9u4_amd64.deb ...
Unpacking samba (2:4.5.12+dfsg-2+deb9u4) ...
Setting up python-dnspython (1.15.0-1) ...
Setting up python-crypto (2.6.1-7) ...
Setting up python-tdb (1.3.11-2) ...
Setting up samba-common (2:4.5.12+dfsg-2+deb9u4) ...
Creating config file /etc/samba/smb.conf with new version
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u8) ...
Setting up tdb-tools (1.3.11-2) ...
update-alternatives: using /usr/bin/tdbbackup.tdbtools to provide /usr/bin/tdbbackup (tdbbackup) in auto mode
Processing triggers for man-db (2.7.6.1-2) ...
Setting up libfile-copy-recursive-perl (0.38-1) ...
Setting up python-ldb (2:1.1.27-1+b1) ...
Setting up update-inetd (4.44) ...
Setting up python-samba (2:4.5.12+dfsg-2+deb9u4) ...
Setting up samba-common-bin (2:4.5.12+dfsg-2+deb9u4) ...
Setting up samba (2:4.5.12+dfsg-2+deb9u4) ...
Adding group `sambashare' (GID 116) ...
Done.
Samba is not being run as an AD Domain Controller, masking samba-ad-dc-service.
Please ignore the following error about deb-systemd-helper not finding samba-ad-dc-service.
Created symlink /etc/systemd/system/multi-user.target.wants/nmbd.service → /lib/systemd/system/nmbd.service.
Failed to preset unit: Unit file /etc/systemd/system/samba-ad-dc.service is masked.
/usr/bin/deb-systemd-helper: error: systemctl preset failed on samba-ad-dc.service: No such file or directory
Created symlink /etc/systemd/system/multi-user.target.wants/smbd.service → /lib/systemd/system/smbd.service.
Processing triggers for libc-bin (2.24-11+deb9u3) ...
Processing triggers for systemd (232-25+deb9u8) ...
Installing spDYN
Installing SSH
Installing UFW
Ign:1 http://ftp.nl.debian.org/debian stretch InRelease
Hit:2 http://security.debian.org/debian-security stretch/updates InRelease
Hit:3 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
ufw
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 164 kB of archives.
After this operation, 848 kB of additional disk space will be used.
Get:1 http://ftp.nl.debian.org/debian stretch/main amd64 ufw all 0.35-4 [164 kB]
Fetched 164 kB in 0s (850 kB/s)
Preconfiguring packages ...
Selecting previously unselected package ufw.
(Reading database ... 38653 files and directories currently installed.)
Preparing to unpack .../archives/ufw_0.35-4_all.deb ...
Unpacking ufw (0.35-4) ...
Setting up ufw (0.35-4) ...
Creating config file /etc/ufw/before.rules with new version
Creating config file /etc/ufw/before6.rules with new version
Creating config file /etc/ufw/after.rules with new version
Creating config file /etc/ufw/after6.rules with new version
Created symlink /etc/systemd/system/multi-user.target.wants/ufw.service → /lib/systemd/system/ufw.service.
Processing triggers for systemd (232-25+deb9u8) ...
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for rsyslog (8.24.0-1) ...
Synchronizing state of ufw.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable ufw
Installing unattended-upgrades
Ign:1 http://ftp.nl.debian.org/debian stretch InRelease
Hit:2 http://security.debian.org/debian-security stretch/updates InRelease
Hit:3 http://ftp.nl.debian.org/debian stretch-updates InRelease
Hit:4 http://ftp.nl.debian.org/debian stretch Release
Hit:5 https://packages.sury.org/php stretch InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
bsd-mailx needrestart
The following NEW packages will be installed:
unattended-upgrades
0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded.
Need to get 61,7 kB of archives.
After this operation, 252 kB of additional disk space will be used.
Get:1 http://ftp.nl.debian.org/debian stretch/main amd64 unattended-upgrades all 0.93.1+nmu1 [61,7 kB]
Fetched 61,7 kB in 0s (426 kB/s)
Preconfiguring packages ...
Selecting previously unselected package unattended-upgrades.
(Reading database ... 38762 files and directories currently installed.)
Preparing to unpack .../unattended-upgrades_0.93.1+nmu1_all.deb ...
Unpacking unattended-upgrades (0.93.1+nmu1) ...
Processing triggers for systemd (232-25+deb9u8) ...
Setting up unattended-upgrades (0.93.1+nmu1) ...
Creating config file /etc/apt/apt.conf.d/20auto-upgrades with new version
Creating config file /etc/apt/apt.conf.d/50unattended-upgrades with new version
Created symlink /etc/systemd/system/multi-user.target.wants/unattended-upgrades.service → /lib/systemd/system/unattended-upgrades.service.
Synchronizing state of unattended-upgrades.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable unattended-upgrades
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for systemd (232-25+deb9u8) ...
Running unattended-upgrades
Unattended upgrades active: yes (autoreboot true)
Nextcloud is not installed - only a limited number of commands are available
Command "app:enable" is not defined.
Did you mean this?
app:check-code
Running nc-init
Setting up a clean Nextcloud instance... wait until message 'NC init done'
Setting up database...
Setting up Nextcloud...
Nextcloud was successfully installed
Set mode for background jobs to 'cron'
System config value tempdirectory set to string /var/www/nextcloud/data/tmp
System config value mysql.utf8mb4 set to boolean true
System config value trusted_domains => 11 set to string 2a02:a44f:6ea5:1:5265:f3ff:fe44:51e9
System config value trusted_domains => 1 set to string 192.168.2.41
System config value trusted_domains => 5 set to string nextcloudpi.local
System config value trusted_domains => 7 set to string nextcloudpi
System config value trusted_domains => 8 set to string nextcloudpi.lan
System config value mail_smtpmode set to string sendmail
System config value mail_smtpauthtype set to string LOGIN
System config value mail_from_address set to string admin
System config value mail_domain set to string ownyourbits.com
nextcloudpi enabled
calendar installed
calendar enabled
contacts installed
contacts enabled
notes installed
notes enabled
tasks installed
tasks enabled
news installed
news enabled
previewgenerator installed
previewgenerator enabled
calendar enabled
contacts enabled
notes enabled
tasks enabled
news enabled
previewgenerator enabled
System config value overwriteprotocol set to string https
Following columns will be updated:
- filecache.mtime
- filecache.storage_mtime
This can take up to hours, depending on the number of files in your instance!
NC init done
Provisioning Redis password
Updating NextCloud config with Redis password
Provisioning MariaDB password
Updating NextCloud config with MariaDB password
Running nc-limits
Using 12378679296B for PHP
Using 8 PHP threads
/home/oliver
Done.
First: Visit https://192.168.1.41/ https://nextcloudpi.local/ (also https://nextcloudpi.lan/ or https://nextcloudpi/ on windows and mac)
to activate your instance of NC, and save the auto generated passwords. You may review or reset them
anytime by using nc-admin and nc-passwd.
Second: Type 'sudo ncp-config' to further configure NCP, or access ncp-web on https://192.168.2.41:4443/
Note: You will have to add an exception, to bypass your browser warning when you
first load the activation and :4443 pages. You can run letsencrypt to get rid of
the warning if you have a (sub)domain available.
