Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 3.0.8 (cbsmbg@CBServer) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #32 PREEMPT Fri Apr 6 15:39:43 CST 2012
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun4i
- [ 0.000000] Total Detected Memory: 1024MB with 2 banks
- [ 0.000000] Memory Reserved(in bytes):
- [ 0.000000] LCD: 0x5a000000, 0x02000000
- [ 0.000000] SYS: 0x43000000, 0x00010000
- [ 0.000000] G2D: 0x58000000, 0x01000000
- [ 0.000000] VE : 0x44000000, 0x05000000
- [ 0.000000] VE : 0x49000000, 0x01000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] On node 0 totalpages: 245760
- [ 0.000000] free_area_init_node: node 0, pgdat c07b2338, node_mem_map c10f0000
- [ 0.000000] Normal zone: 1280 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 146176 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 768 pages used for memmap
- [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
- [ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=8
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 448MB 512MB = 960MB total
- [ 0.000000] Memory: 832724k/832724k available, 150316k reserved, 393216K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
- [ 0.000000] .text : 0xc002f000 - 0xc076a768 (7406 kB)
- [ 0.000000] .data : 0xc076c000 - 0xc07bc410 ( 322 kB)
- [ 0.000000] .bss : 0xc07bc434 - 0xc0977ab8 (1774 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:96 nr_irqs:96 96
- [ 0.000000] timer0: Periodic Mode
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
- [ 0.040000] pid_max: default: 32768 minimum: 301
- [ 0.040000] Mount-cache hash table entries: 512
- [ 0.040000] CPU: Testing write buffer coherency: ok
- [ 0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.040000] devtmpfs: initialized
- [ 0.040000] print_constraints: dummy:
- [ 0.040000] NET: Registered protocol family 16
- [ 0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
- [ 0.040000] Initialize DMAC OK
- [ 0.040000] bio: create slab <bio-0> at 0
- [ 0.040000] SCSI subsystem initialized
- [ 0.040000] usbcore: registered new interface driver usbfs
- [ 0.040000] usbcore: registered new interface driver hub
- [ 0.040000] usbcore: registered new device driver usb
- [ 0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.040000] Bluetooth: Core ver 2.16
- [ 0.040000] NET: Registered protocol family 31
- [ 0.040000] Bluetooth: HCI device and connection manager initialized
- [ 0.040000] Bluetooth: HCI socket layer initialized
- [ 0.040000] Bluetooth: L2CAP socket layer initialized
- [ 0.040000] Bluetooth: SCO socket layer initialized
- [ 0.040000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.040000] Init eGon pin module V2.0
- [ 0.040000] Switching to clocksource aw 64bits couter
- [ 0.040000] FS-Cache: Loaded
- [ 0.040000] CacheFiles: Loaded
- [ 0.050000] Switched to NOHz mode on CPU #0
- [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
- [ 0.050000] [sw_hcd0]: usb host driver initialize........
- [ 0.050000] [sw_hcd0]: open_usb_clock
- [ 0.060000] [sw_hcd0]: host_init_state = 0
- [ 0.060000] [sw_hcd0]: platform is usb host
- [ 0.060000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
- [ 0.060000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
- [ 0.060000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
- [ 0.060000] hub 1-0:1.0: USB hub found
- [ 0.060000] hub 1-0:1.0: 1 port detected
- [ 0.060000] wrn: hcd is not enable, need not start hcd
- [ 0.060000] [sw_hcd0]: sw_usb_host0_disable start
- [ 0.060000] -------sw_hcd0_soft_disconnect---------
- [ 0.060000] [sw_hcd_host0]: Set USB Power OFF
- [ 0.060000] wrn: hcd is not enable, need not stop hcd
- [ 0.060000] [sw_hcd0]: close_usb_clock
- [ 0.060000] [sw_hcd0]: sw_usb_host0_disable end
- [ 0.060000] [sw_udc]: udc_init: version 20080411
- [ 0.060000] axp driver uning configuration failed(539)
- [ 0.060000] axp driver uning configuration failed(551)
- [ 0.060000] NET: Registered protocol family 2
- [ 0.060000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.060000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.070000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.070000] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.070000] TCP reno registered
- [ 0.070000] UDP hash table entries: 512 (order: 1, 8192 bytes)
- [ 0.070000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
- [ 0.070000] NET: Registered protocol family 1
- [ 0.070000] RPC: Registered named UNIX socket transport module.
- [ 0.070000] RPC: Registered udp transport module.
- [ 0.070000] RPC: Registered tcp transport module.
- [ 0.070000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.070000] Trying to unpack rootfs image as initramfs...
- [ 0.120000] Freeing initrd memory: 956K
- [ 0.120000] [pm]aw_pm_init!
- [ 0.140000] highmem bounce pool size: 64 pages
- [ 0.140000] ashmem: initialized
- [ 0.150000] VFS: Disk quotas dquot_6.5.2
- [ 0.150000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.150000] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.150000] fuse init (API version 7.16)
- [ 0.150000] msgmni has been set to 860
- [ 0.150000] cryptomgr_test used greatest stack depth: 6672 bytes left
- [ 0.150000] cryptomgr_test used greatest stack depth: 6388 bytes left
- [ 0.150000] cryptomgr_test used greatest stack depth: 6280 bytes left
- [ 0.150000] alg: No test for stdrng (krng)
- [ 0.150000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.150000] io scheduler noop registered
- [ 0.150000] io scheduler deadline registered
- [ 0.150000] io scheduler cfq registered (default)
- [ 0.150000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.160000] [uart]: used uart info.: 0x05
- [ 0.180000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
- [ 0.830000] console [ttyS0] enabled
- [ 0.840000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
- [ 0.860000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
- [ 0.870000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
- [ 0.880000] G2D: drv_g2d_init
- [ 0.880000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
- [ 0.890000] G2D: head:d8000000,tail:d9000000
- [ 0.890000] G2D: Module initialized.major:251
- [ 0.900000] brd: module loaded
- [ 0.900000] loop: module loaded
- [ 0.910000] [NAND]nand driver, init.
- [ 0.910000] [NAND] nand gpio_request
- [ 0.910000] [NAND] nand driver version: 0x2 0x9
- [ 0.920000] nand interrupte register ok
- [ 0.920000] ret of NFC_ChangMode is 0
- [ 0.930000] dma_hdle is 0
- [ 0.930000] dma_hdle is 10000008
- [ 0.960000] The 0 disk name = bootloader, class name = DISK, disk size = 32768
- [ 0.970000] The 1 disk name = env, class name = DISK, disk size = 4096
- [ 0.970000] The 2 disk name = boot, class name = DISK, disk size = 65536
- [ 0.980000] The 3 disk name = system, class name = DISK, disk size = 524288
- [ 0.990000] The 4 disk name = data, class name = DISK, disk size = 2097152
- [ 0.990000] The 5 disk name = misc, class name = DISK, disk size = 2048
- [ 1.000000] The 6 disk name = recovery, class name = DISK, disk size = 65536
- [ 1.010000] The 7 disk name = cache, class name = DISK, disk size = 524288
- [ 1.020000] The 8 disk name = UDISK, class name = DISK, disk size = 12247040
- [ 1.020000] The 8 disk size = 12247040
- [ 1.030000] part total count = 9
- [ 1.030000] nanda:
- [ 1.030000] nandb: unknown partition table
- [ 1.040000] nandc: unknown partition table
- [ 1.050000] nandd: unknown partition table
- [ 1.050000] nande: unknown partition table
- [ 1.060000] nandf: unknown partition table
- [ 1.060000] nandg: unknown partition table
- [ 1.070000] nandh: unknown partition table
- [ 1.070000] nandi:
- [ 1.080000] benn: nand probe enter
- [ 1.080000] [NAND]nand driver, ok.
- [ 1.080000] PPP generic driver version 2.4.2
- [ 1.090000] PPP Deflate Compression module registered
- [ 1.090000] PPP BSD Compression module registered
- [ 1.100000] PPP MPPE Compression module registered
- [ 1.100000] NET: Registered protocol family 24
- [ 1.110000] PPTP driver version 0.8.5
- [ 1.110000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
- [ 1.120000] can't get information emac_power gpio
- [ 1.120000] [EMAC] ahb clk enable
- [ 1.130000] [EMAC] ahb gate clk: 0x26040
- [ 1.140000] wemac wemac.0: PHY SETUP, reg 0 value: 0
- [ 1.150000] emac MAC isn't valid!
- [ 1.150000] wemac wemac.0: resetting device
- [ 1.160000] release temp resource
- [ 1.160000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.170000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.170000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc086d4c4
- [ 1.180000] [sw-ehci1]: open clock
- [ 1.200000] [sw-ehci1]: Set USB Power ON
- [ 1.210000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.220000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
- [ 1.220000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
- [ 1.250000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
- [ 1.250000] hub 2-0:1.0: USB hub found
- [ 1.250000] hub 2-0:1.0: 1 port detected
- [ 1.260000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc086d5d4
- [ 1.270000] [sw-ohci1]: open clock
- [ 1.290000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.300000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
- [ 1.300000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
- [ 1.370000] hub 3-0:1.0: USB hub found
- [ 1.370000] hub 3-0:1.0: 1 port detected
- [ 1.380000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 1.390000] [sw-ehci2]: open clock
- [ 1.410000] [sw-ehci2]: Set USB Power ON
- [ 1.410000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.420000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 1.430000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
- [ 1.450000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 1.450000] ehci_irq: port change detect
- [ 1.450000] hub 4-0:1.0: USB hub found
- [ 1.460000] hub 4-0:1.0: 1 port detected
- [ 1.460000] [sw-ehci2]: sw_usb_disable_ehci
- [ 1.470000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 1.470000] sw-ehci sw-ehci.2: remove, state 1
- [ 1.480000] usb usb4: USB disconnect, device number 1
- [ 1.490000] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 1.490000] [sw-ehci2]: Set USB Power OFF
- [ 1.490000] [sw-ehci2]: close clock
- [ 1.500000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 1.510000] [sw-ohci2]: open clock
- [ 1.530000] [sw-ohci2]: Set USB Power ON
- [ 1.530000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 1.540000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
- [ 1.550000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
- [ 1.610000] hub 4-0:1.0: USB hub found
- [ 1.610000] hub 4-0:1.0: 1 port detected
- [ 1.620000] [sw-ohci2]: sw_usb_disable_ohci
- [ 1.620000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 1.630000] sw-ohci sw-ohci.2: remove, state 1
- [ 1.630000] usb usb4: USB disconnect, device number 1
- [ 1.640000] sw-ohci sw-ohci.2: USB bus 4 deregistered
- [ 1.640000] [sw-ohci2]: Set USB Power OFF
- [ 1.650000] [sw-ohci2]: close clock
- [ 1.650000] Initializing USB Mass Storage driver...
- [ 1.660000] usbcore: registered new interface driver usb-storage
- [ 1.660000] USB Mass Storage support registered.
- [ 1.670000] usbcore: registered new interface driver ums-alauda
- [ 1.670000] usbcore: registered new interface driver ums-cypress
- [ 1.680000] usbcore: registered new interface driver ums-datafab
- [ 1.690000] usbcore: registered new interface driver ums_eneub6250
- [ 1.690000] usbcore: registered new interface driver ums-freecom
- [ 1.700000] usbcore: registered new interface driver ums-isd200
- [ 1.700000] usbcore: registered new interface driver ums-jumpshot
- [ 1.710000] usbcore: registered new interface driver ums-karma
- [ 1.720000] usbcore: registered new interface driver ums-onetouch
- [ 1.720000] usbcore: registered new interface driver ums-realtek
- [ 1.730000] usbcore: registered new interface driver ums-sddr09
- [ 1.730000] usbcore: registered new interface driver ums-sddr55
- [ 1.740000] usbcore: registered new interface driver ums-usbat
- [ 1.750000] usbcore: registered new interface driver usbserial
- [ 1.750000] usbserial: USB Serial Driver core
- [ 1.760000] USB Serial support registered for GSM modem (1-port)
- [ 1.760000] usbcore: registered new interface driver option
- [ 1.770000] option: v0.7.2:USB Driver for GSM modems
- [ 1.770000] ------print_msc_config-----
- [ 1.780000] vendor_id = 0x18d1
- [ 1.780000] mass_storage_id = 0x1
- [ 1.780000] adb_id = 0x2
- [ 1.790000] usb_manufacturer_name = USB Developer
- [ 1.790000] usb_product_name = Android
- [ 1.800000] usb_serial_number = 20080411
- [ 1.800000] msc_vendor_name = q702
- [ 1.810000] msc_product_name = USB Flash Driver
- [ 1.810000] msc_release = 100
- [ 1.810000] luns = 2
- [ 1.820000] ---------------------------
- [ 1.820000] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
- [ 1.830000] [sw_udc]: alloc request: ep(0xc0799b20, ep0, 64), req(0xe7bc5540)
- [ 1.840000] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.840000] [sw_udc]: sw_udc_pullup, is_on = 0
- [ 1.850000] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.860000] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 1.860000] android_usb gadget: Number of LUNs=2
- [ 1.870000] lun0: LUN: removable file: (no medium)
- [ 1.870000] lun1: LUN: removable file: (no medium)
- [ 1.880000] lun name: lun
- [ 1.880000] lun name: lun1
- [ 1.880000] WRN:L2703(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 1.890000] android_usb gadget: android_usb ready
- [ 1.900000] mousedev: PS/2 mouse device common for all mice
- [ 1.900000] input: sun4i-keyboard as /devices/virtual/input/input0
- [ 1.910000] ==register_early_suspend =
- [ 1.910000] sunxi RTC version 0.1
- [ 1.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
- [ 1.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1.930000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:29:1
- [ 1.930000] using rtc device, rtc, for alarms
- [ 1.940000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
- [ 1.940000] i2c /dev entries driver
- [ 1.950000] !!! base_Addr = 0xe8912c00
- [ 1.950000] config i2c gpio with gpio_config api
- [ 1.960000] twi0, apb clock = 24000000
- [ 1.960000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
- [ 1.970000] [AXP]axp driver uning configuration failed(323)
- [ 1.970000] [AXP]power_start = 0
- [ 1.980000] I2C: i2c-0: AW16XX I2C adapter
- [ 1.980000] **********start************
- [ 1.990000] 0x40
- [ 1.990000] 0xf8
- [ 1.990000] 0x28
- [ 1.990000] 0x0
- [ 1.990000] 0x0
- [ 1.990000] **********end************
- [ 2.000000] !!! base_Addr = 0xe8914000
- [ 2.000000] twi1, apb clock = 24000000
- [ 2.010000] I2C: i2c-1: AW16XX I2C adapter
- [ 2.010000] **********start************
- [ 2.010000] 0x40
- [ 2.020000] 0xf8
- [ 2.020000] 0x58
- [ 2.020000] 0x0
- [ 2.020000] 0x0
- [ 2.020000] **********end************
- [ 2.030000] !!! base_Addr = 0xe8916400
- [ 2.030000] twi2, apb clock = 24000000
- [ 2.040000] I2C: i2c-2: AW16XX I2C adapter
- [ 2.040000] **********start************
- [ 2.040000] 0x40
- [ 2.050000] 0xf8
- [ 2.050000] 0x58
- [ 2.050000] 0x0
- [ 2.050000] 0x0
- [ 2.050000] **********end************
- [ 2.060000] lirc_dev: IR Remote Control driver registered, major 249
- [ 2.060000] IR NEC protocol handler initialized
- [ 2.070000] IR RC5(x) protocol handler initialized
- [ 2.070000] IR RC6 protocol handler initialized
- [ 2.080000] IR JVC protocol handler initialized
- [ 2.080000] IR Sony protocol handler initialized
- [ 2.090000] IR RC5 (streamzap) protocol handler initialized
- [ 2.090000] IR LIRC bridge handler initialized
- [ 2.100000] Linux video capture interface: v2.00
- [ 2.100000] [cedar dev]: install start!!!
- [ 2.100000] [cedar dev]: install end!!!
- [ 2.110000] [ace_drv] start!!!
- [ 2.110000] [ace_drv] init end!!!
- [ 2.120000] [pa_drv] start!!!
- [ 2.120000] [pa_drv] init end!!!
- [ 2.120000] print_constraints: axp20_ldo1: 1300 mV
- [ 2.130000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
- [ 2.140000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
- [ 2.140000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
- [ 2.150000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
- [ 2.160000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
- [ 2.170000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
- [ 2.170000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
- [ 2.190000] [AXP]axp driver uning configuration failed(1759)
- [ 2.190000] [AXP]pmu_suspendpwroff_vol = 3500
- [ 2.200000] pmu_pekoff_time = 6000
- [ 2.200000] pmu_pekoff_en = 1
- [ 2.200000] pmu_peklong_time = 1500
- [ 2.210000] pmu_pekon_time = 1000
- [ 2.210000] pmu_pwrok_time = 64
- [ 2.210000] pmu_pwrnoe_time = 2000
- [ 2.220000] pmu_intotp_en = 1
- [ 2.220000] [AXP]1823-->0x42
- [ 2.220000] POWER20_PEK_SET:1842-->0x9d
- [ 2.230000] POWER20_PEK_SET:1853-->0x9d
- [ 2.230000] POWER20_PEK_SET:1862-->0x9d
- [ 2.240000] POWER20_PEK_SET:1873-->0x9d
- [ 2.240000] POWER20_PEK_SET:1885-->0x9d
- [ 2.250000] POWER20_HOTOVER_CTL:1894-->0xad
- [ 2.250000] Cur_CoulombCounter = 1
- [ 2.260000] last_rest_vol = 46, now_rest_vol = 56
- [ 2.260000] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 2.270000] device-mapper: multipath: version 1.3.0 loaded
- [ 2.280000] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 2.290000] device-mapper: multipath queue-length: version 0.1.0 loaded
- [ 2.290000] device-mapper: multipath service-time: version 0.2.0 loaded
- [ 2.300000] Bluetooth: HCI UART driver ver 2.2
- [ 2.300000] Bluetooth: HCI H4 protocol initialized
- [ 2.310000] Bluetooth: HCI BCSP protocol initialized
- [ 2.310000] Bluetooth: HCILL protocol initialized
- [ 2.320000] [mmc_pm]: no sdio card used in configuration
- [ 2.320000] [mmc]: sunximmc_init
- [ 2.330000] [mmc]: sunxi mmc controller using config : 0xb
- [ 2.330000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
- [ 2.340000] [mmc]: mmc 0 power off !!
- [ 2.340000] [mmc]: mmc0 Probe: base:0xe891e000 irq:32 dma:0 pdes:0xe701c000, ret 0.
- [ 2.350000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
- [ 2.360000] [mmc]: mmc 1 power off !!
- [ 2.360000] [mmc]: mmc1 Probe: base:0xe8920000 irq:33 dma:0 pdes:0xe7020000, ret 0.
- [ 2.370000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
- [ 2.370000] [mmc]: mmc 3 power off !!
- [ 2.380000] [mmc]: mmc3 Probe: base:0xe8922000 irq:35 dma:0 pdes:0xe7024000, ret 0.
- [ 2.390000] usbcore: registered new interface driver usbhid
- [ 2.390000] usbhid: USB HID core driver
- [ 2.400000] logger: created 256K log 'log_main'
- [ 2.400000] logger: created 256K log 'log_events'
- [ 2.410000] logger: created 256K log 'log_radio'
- [ 2.410000] logger: created 256K log 'log_system'
- [ 2.420000] enter sun4i Audio codec!!!
- [ 2.420000] sun4i audio support initialized
- [ 2.420000] audiocodec_adap_awxx_init: script_parser_fetch err.
- [ 2.430000] sun4i Audio codec successfully loaded..
- [ 2.440000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
- [ 2.440000] ALSA device list:
- [ 2.450000] #0: sun4i-CODEC Audio Codec
- [ 2.450000] #1: sun4i-sndhdmi
- [ 2.450000] Netfilter messages via NETLINK v0.30.
- [ 2.460000] nf_conntrack version 0.5.0 (13026 buckets, 52104 max)
- [ 2.460000] ctnetlink v0.93: registering with nfnetlink.
- [ 2.470000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 2.480000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 2.480000] IPv4 over IPv4 tunneling driver
- [ 2.490000] GRE over IPv4 demultiplexor driver
- [ 2.490000] GRE over IPv4 tunneling driver
- [ 2.500000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.500000] TCP cubic registered
- [ 2.510000] Initializing XFRM netlink socket
- [ 2.510000] NET: Registered protocol family 10
- [ 2.520000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.520000] IPv6 over IPv4 tunneling driver
- [ 2.530000] NET: Registered protocol family 17
- [ 2.530000] NET: Registered protocol family 15
- [ 2.540000] Bluetooth: RFCOMM TTY layer initialized
- [ 2.540000] Bluetooth: RFCOMM socket layer initialized
- [ 2.550000] Bluetooth: RFCOMM ver 1.11
- [ 2.550000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 2.550000] Bluetooth: BNEP filters: protocol multicast
- [ 2.560000] L2TP core driver, V2.0
- [ 2.560000] PPPoL2TP kernel driver, V2.0
- [ 2.570000] L2TP IP encapsulation support (L2TPv3)
- [ 2.570000] L2TP netlink interface
- [ 2.580000] L2TP ethernet pseudowire support (L2TPv3)
- [ 2.580000] [mmc_pm]: No sdio card, please check your config !!
- [ 2.590000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- [ 2.600000] [LCD] lcd_module_init
- [ 3.240000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
- [ 3.250000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
- [ 3.260000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
- [ 3.260000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
- [ 3.270000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
- [ 3.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3.280000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:29:2
- [ 3.290000] sunxi-rtc sunxi-rtc: setting system clock to 2012-04-24 18:29:02 UTC (1335292142)
- [ 3.300000] Freeing init memory: 156K
- [ 3.360000] init: width = 1024
- [ 3.360000] init: height = 600
- [ 3.360000] init: s.st_size = 2457600
- [ 3.380000] init: command 'loglevel' r=0
- [ 3.380000] init: command 'export' r=0
- [ 3.390000] init: command 'export' r=0
- [ 3.390000] init: command 'export' r=0
- [ 3.390000] init: command 'export' r=0
- [ 3.400000] init: command 'export' r=0
- [ 3.400000] init: command 'export' r=0
- [ 3.410000] init: command 'export' r=0
- [ 3.410000] init: command 'export' r=0
- [ 3.410000] init: command 'export' r=0
- [ 3.420000] init: command 'symlink' r=0
- [ 3.420000] init: command 'symlink' r=0
- [ 3.420000] init: command 'symlink' r=0
- [ 3.430000] init: command 'mkdir' r=0
- [ 3.430000] init: command 'mount' r=-1
- [ 3.440000] init: command 'mkdir' r=0
- [ 3.440000] init: command 'mkdir' r=0
- [ 3.440000] init: command 'mkdir' r=0
- [ 3.450000] init: command 'mkdir' r=0
- [ 3.450000] init: command 'mkdir' r=0
- [ 3.450000] init: command 'mkdir' r=0
- [ 3.460000] init: command 'mkdir' r=0
- [ 3.460000] init: command 'mkdir' r=0
- [ 3.470000] init: command 'mkdir' r=0
- [ 3.470000] init: command 'mount' r=0
- [ 3.470000] init: command 'mkdir' r=0
- [ 3.480000] init: command 'mount' r=0
- [ 3.480000] init: command 'write' r=0
- [ 3.480000] init: command 'write' r=-2
- [ 3.490000] init: command 'write' r=0
- [ 3.490000] init: command 'write' r=0
- [ 3.500000] init: command 'write' r=0
- [ 3.500000] init: command 'write' r=-2
- [ 3.500000] init: command 'write' r=0
- [ 3.510000] init: command 'mkdir' r=0
- [ 3.510000] init: command 'mount' r=-1
- [ 3.510000] init: command 'chown' r=0
- [ 3.520000] init: command 'chown' r=-2
- [ 3.520000] init: command 'chmod' r=-2
- [ 3.530000] init: command 'write' r=0
- [ 3.530000] init: command 'mkdir' r=0
- [ 3.530000] init: command 'chown' r=-2
- [ 3.540000] init: command 'chmod' r=-2
- [ 3.540000] init: command 'write' r=0
- [ 3.540000] init: command 'mkdir' r=0
- [ 3.550000] init: command 'chown' r=-2
- [ 3.550000] init: command 'chmod' r=-2
- [ 3.560000] init: command 'write' r=0
- [ 3.560000] init: command 'chmod' r=0
- [ 3.560000] init: processing action 0x30340 (fs)
- [ 3.580000] EXT4-fs (nandd): barriers disabled
- [ 3.580000] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.590000] init: command 'mount' r=0
- [ 3.600000] init: command 'wait' r=0
- [ 3.610000] EXT4-fs (nande): barriers disabled
- [ 3.630000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 40968
- [ 3.630000] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 40967
- [ 3.640000] EXT4-fs (nande): 2 orphan inodes deleted
- [ 3.650000] EXT4-fs (nande): recovery complete
- [ 3.650000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.660000] init: command 'mount' r=0
- [ 3.660000] init: command 'setupfs' r=0
- [ 3.670000] init: do_umount: /data
- [ 3.680000] init: command 'umount' r=0
- [ 3.770000] e2fsck used greatest stack depth: 5696 bytes left
- [ 3.770000] init: command 'exec' r=0
- [ 3.870000] EXT4-fs (nande): barriers disabled
- [ 3.870000] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
- [ 3.880000] init: command 'exec' r=0
- [ 3.900000] EXT4-fs (nandh): barriers disabled
- [ 3.900000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
- [ 3.910000] init: command 'mount' r=0
- [ 3.910000] init: command 'setupfs' r=0
- [ 3.920000] init: do_umount: /cache
- [ 3.930000] init: command 'umount' r=0
- [ 3.950000] init: command 'exec' r=0
- [ 3.960000] EXT4-fs (nandh): barriers disabled
- [ 3.970000] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
- [ 3.980000] init: command 'exec' r=0
- [ 3.980000] init: dont need format /dev/block/nandi
- [ 3.990000] init: command 'format_userdata' r=1
- [ 3.990000] init: processing action 0x2b098 (post-fs)
- [ 4.000000] init: command 'chown' r=0
- [ 4.000000] init: command 'chmod' r=0
- [ 4.010000] init: command 'chown' r=-2
- [ 4.010000] init: command 'chmod' r=-2
- [ 4.010000] init: command 'chown' r=0
- [ 4.020000] init: command 'chmod' r=0
- [ 4.020000] init: command 'chown' r=0
- [ 4.020000] init: command 'chmod' r=0
- [ 4.030000] init: command 'chown' r=0
- [ 4.030000] init: command 'chmod' r=0
- [ 4.040000] init: command 'mkdir' r=0
- [ 4.040000] init: processing action 0x2b288 (post-fs-data)
- [ 4.050000] init: command 'chown' r=0
- [ 4.050000] init: command 'chmod' r=0
- [ 4.060000] init: command 'mkdir' r=0
- [ 4.070000] init: command 'copy' r=-1
- [ 4.070000] init: command 'chown' r=-2
- [ 4.080000] init: command 'chmod' r=-2
- [ 4.080000] init: command 'copy' r=-1
- [ 4.080000] init: command 'chown' r=-2
- [ 4.090000] init: command 'chmod' r=-2
- [ 4.090000] init: command 'write' r=-2
- [ 4.100000] init: command 'mkdir' r=0
- [ 4.110000] init: command 'mkdir' r=0
- [ 4.110000] init: command 'mkdir' r=0
- [ 4.120000] init: command 'mkdir' r=0
- [ 4.120000] init: command 'mkdir' r=0
- [ 4.120000] init: command 'mkdir' r=0
- [ 4.130000] init: command 'mkdir' r=0
- [ 4.130000] init: command 'mkdir' r=0
- [ 4.140000] init: command 'mkdir' r=0
- [ 4.140000] init: command 'chmod' r=0
- [ 4.140000] init: command 'mkdir' r=0
- [ 4.150000] init: command 'chown' r=0
- [ 4.150000] init: command 'mkdir' r=0
- [ 4.150000] init: command 'chmod' r=0
- [ 4.160000] init: command 'chmod' r=0
- [ 4.160000] init: command 'chmod' r=0
- [ 4.170000] init: command 'chmod' r=0
- [ 4.170000] init: command 'chmod' r=0
- [ 4.180000] init: command 'mkdir' r=0
- [ 4.190000] init: command 'mkdir' r=0
- [ 4.200000] init: command 'mkdir' r=0
- [ 4.210000] init: command 'mkdir' r=0
- [ 4.230000] init: command 'mkdir' r=0
- [ 4.240000] init: command 'mkdir' r=0
- [ 4.240000] init: command 'mkdir' r=0
- [ 4.240000] init: command 'mkdir' r=0
- [ 4.250000] init: command 'mkdir' r=0
- [ 4.250000] init: command 'chown' r=0
- [ 4.260000] init: command 'chmod' r=0
- [ 4.260000] init: command 'mkdir' r=0
- [ 4.260000] init: command 'mkdir' r=0
- [ 4.270000] init: command 'chown' r=0
- [ 4.270000] init: command 'chmod' r=0
- [ 4.270000] init: command 'chown' r=0
- [ 4.280000] init: command 'chmod' r=0
- [ 4.280000] init: processing action 0x30a10 (property_service_init)
- [ 4.290000] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
- [ 4.300000] init: command 'property_service_init' r=0
- [ 4.310000] init: processing action 0x30a58 (signal_init)
- [ 4.310000] init: command 'signal_init' r=0
- [ 4.320000] init: processing action 0x30aa0 (check_startup)
- [ 4.320000] init: command 'check_startup' r=0
- [ 4.330000] init: processing action 0x2ba78 (boot)
- [ 4.340000] init: command 'chown' r=0
- [ 4.340000] init: command 'chmod' r=0
- [ 4.350000] init: command 'ifup' r=0
- [ 4.350000] init: command 'hostname' r=0
- [ 4.360000] init: command 'domainname' r=0
- [ 4.360000] init: command 'setrlimit' r=0
- [ 4.370000] init: command 'write' r=0
- [ 4.370000] init: command 'write' r=0
- [ 4.370000] init: command 'chown' r=0
- [ 4.380000] init: command 'chmod' r=0
- [ 4.380000] init: command 'chown' r=0
- [ 4.380000] init: command 'chmod' r=0
- [ 4.390000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 4.400000] init: command 'write' r=0
- [ 4.400000] init: command 'write' r=0
- [ 4.400000] init: command 'write' r=0
- [ 4.410000] init: command 'chown' r=-2
- [ 4.410000] init: command 'chown' r=-2
- [ 4.410000] init: command 'chown' r=-2
- [ 4.420000] init: command 'chown' r=-2
- [ 4.420000] init: command 'chown' r=-2
- [ 4.430000] init: command 'chown' r=0
- [ 4.430000] init: command 'chown' r=0
- [ 4.430000] init: command 'chown' r=0
- [ 4.440000] init: command 'chmod' r=0
- [ 4.440000] init: command 'chmod' r=0
- [ 4.440000] init: command 'chmod' r=0
- [ 4.450000] init: command 'chown' r=0
- [ 4.450000] init: command 'chmod' r=0
- [ 4.460000] init: command 'chown' r=-2
- [ 4.460000] init: command 'chown' r=-2
- [ 4.460000] init: command 'chown' r=-2
- [ 4.470000] init: command 'chown' r=-2
- [ 4.470000] init: command 'chown' r=-2
- [ 4.470000] init: command 'chown' r=-2
- [ 4.480000] init: command 'chown' r=-2
- [ 4.480000] init: command 'chown' r=-2
- [ 4.490000] init: command 'chown' r=-2
- [ 4.490000] init: command 'chown' r=-2
- [ 4.490000] init: command 'chown' r=-2
- [ 4.500000] init: command 'chown' r=-2
- [ 4.500000] init: command 'chown' r=-2
- [ 4.500000] init: command 'chown' r=-2
- [ 4.510000] init: command 'chown' r=-2
- [ 4.510000] init: command 'chown' r=-2
- [ 4.520000] init: command 'chown' r=-2
- [ 4.520000] init: command 'chown' r=-2
- [ 4.520000] init: command 'chown' r=-2
- [ 4.530000] init: command 'chown' r=0
- [ 4.530000] init: command 'chown' r=0
- [ 4.530000] init: command 'chown' r=0
- [ 4.540000] init: command 'chown' r=0
- [ 4.540000] init: command 'chown' r=0
- [ 4.550000] init: command 'chown' r=0
- [ 4.550000] init: command 'chown' r=0
- [ 4.550000] init: command 'setprop' r=0
- [ 4.560000] init: command 'setprop' r=0
- [ 4.560000] init: command 'setprop' r=0
- [ 4.560000] init: command 'setprop' r=0
- [ 4.570000] init: command 'setprop' r=0
- [ 4.570000] init: command 'setprop' r=0
- [ 4.580000] init: command 'setprop' r=0
- [ 4.580000] init: command 'setprop' r=0
- [ 4.580000] init: starting 'console'
- [ 4.590000] init: starting 'servicemanager'
- [ 4.590000] init: starting 'vold'
- [ 4.600000] init: command 'class_start' r=0
- [ 4.600000] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
- [ 4.610000] init: starting 'netd'
- [ 4.620000] init: starting 'debuggerd'
- [ 4.620000] init: starting 'surfaceflinger'
- [ 4.630000] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
- [ 4.640000] init: starting 'zygote'
- [ 4.640000] init: starting 'drm'
- [ 4.650000] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
- [ 4.660000] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
- [ 4.660000] init: starting 'media'
- [ 4.670000] init: starting 'dbus'
- [ 4.670000] init: starting 'installd'
- [ 4.680000] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
- [ 4.690000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- [ 4.700000] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
- [ 4.710000] init: starting 'keystore'
- [ 4.710000] init: starting 'u3gmonitor'
- [ 4.720000] init: starting 'ril-daemon'
- [ 4.720000] init: command 'class_start' r=0
- [ 4.730000] init: processing action 0x305d0 (boot)
- [ 4.730000] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
- [ 4.740000] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
- [ 4.750000] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
- [ 4.810000] ===========================goodix_ts_init=====================
- [ 4.820000] ctp_fetch_sysconfig_para.
- [ 4.820000] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x5d, dirty_addr_buf: 0x5d. dirty_addr_buf[1]: 0xfffe
- [ 4.830000] ctp_fetch_sysconfig_para: ctp_twi_id is 2.
- [ 4.840000] ctp_fetch_sysconfig_para: screen_max_x = 1024.
- [ 4.840000] ctp_fetch_sysconfig_para: screen_max_y = 600.
- [ 4.850000] ctp_fetch_sysconfig_para: revert_x_flag = 0.
- [ 4.870000] ctp_fetch_sysconfig_para: revert_y_flag = 0.
- [ 4.900000] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
- [ 4.900000] goodix_ts_init: after fetch_sysconfig_para: normal_i2c: 0x5d. normal_i2c[1]: 0xfffe
- [ 4.930000] ctp_detect: Detected chip Goodix-TS at adapter 2, address 0x5d
- [ 4.930000] Goodix-TS 2-005d: Install gt811 driver.
- [ 4.950000] Goodix-TS 2-005d: Driver Release Date:2012-02-08
- [ 4.960000] ======goodix_gt811 probe======
- [ 5.090000] ctp_set_irq_mode: config gpio to int mode.
- [ 5.090000] INTERRUPT CONFIG
- [ 5.100000] Goodix-TS 2-005d: GT811 init info:X_MAX=4096,Y_MAX=4096,TRIG_MODE=FALLING EDGE
- [ 5.130000] input: gt80x as /devices/virtual/input/input2
- [ 5.330000] Goodix-TS 2-005d: GT811 Verion:0x1020
- [ 5.330000] Goodix-TS 2-005d: Start gt80x in interrupt mode,Driver Modify Date:2012-01-05
- [ 5.340000] init: command 'insmod' r=0
- [ 5.390000] UMP: UMP device driver loaded
- [ 5.400000] init: command 'insmod' r=0
- [ 5.560000] Mali: mali--2244-rel0!
- [ 5.560000] Mali: Mali device driver r2p4-02rel0 loaded
- [ 5.570000] init: command 'insmod' r=0
- [ 5.600000] init: command 'insmod' r=0
- [ 5.620000] init: command 'insmod' r=0
- [ 5.680000] init: command 'insmod' r=0
- [ 5.690000] init: command 'insmod' r=0
- [ 5.750000] [CSI]Welcome to CSI driver
- [ 5.760000] [CSI]csi_init
- [ 5.760000] [CSI_ERR]fetch csi_flash from sys_config failed
- [ 5.770000] [CSI_ERR]fetch csi_af_en from sys_config failed
- [ 5.780000] [CSI_ERR]fetch csi_flash_b from sys_config failed
- [ 5.780000] [CSI_ERR]fetch csi_af_en_b from sys_config failed
- [ 5.790000] [CSI]registered sub device,input_num = 0
- [ 5.800000] [CSI]registered sub device,input_num = 1
- [ 5.800000] [CSI]power on and power off camera!
- [ 6.820000] [CSI]power on and power off camera!
- [ 7.540000] [CSI]V4L2 device registered as video0
- [ 7.550000] init: command 'insmod' r=0
- [ 7.550000] init: starting 'bootanim'
- [ 7.590000] init: command 'insmod' r=0
- [ 7.630000] usbcore: registered new interface driver asix
- [ 7.630000] init: command 'insmod' r=0
- [ 7.710000] usbcore: registered new interface driver qf9700
- [ 7.710000] init: command 'insmod' r=0
- [ 7.790000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 7.790000] init: command 'insmod' r=0
- [ 7.830000] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
- [ 7.840000] usbcore: registered new interface driver rtl8150
- [ 7.850000] init: command 'insmod' r=0
- [ 7.860000] ======mma7660_init=========.
- [ 7.870000] ========gsensor_fetch_sysconfig_para===================
- [ 7.870000] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe
- [ 7.890000] gsensor_fetch_sysconfig_para: twi_id is 1.
- [ 7.890000] mma7660_init: after fetch_sysconfig_para: normal_i2c: 0x4c. normal_i2c[1]: 0xfffe
- [ 7.900000] gsensor_detect: Detected chip mma7660 at adapter 1, address 0x4c
- [ 7.910000] mma7660 probe
- [ 8.060000] mma7660 1-004c: build time Mar 23 2012 08:08:19
- [ 8.060000] input: mma7660 as /devices/virtual/input/input3
- [ 8.070000] add mma7660 i2c driver
- [ 8.070000] init: command 'insmod' r=0
- [ 8.080000] init: processing action 0x30ae8 (queue_propety_triggers)
- [ 8.100000] init: command 'queue_propety_triggers' r=0
- [ 8.100000] init: processing action 0x2c480 (nonencrypted)
- [ 8.110000] init: command 'class_start' r=0
- [ 8.110000] init: processing action 0x2cba8 (property:persist.sys.usb.config=*)
- [ 8.120000] init: command 'setprop' r=0
- [ 8.130000] init: processing action 0x2cd78 (property:ro.debuggable=1)
- [ 8.130000] init: command 'start' r=0
- [ 8.140000] init: processing action 0x2fc30 (property:sys.usb.config=mass_storage,adb)
- [ 8.140000] android_usb: already disabled
- [ 8.150000] init: command 'write' r=0
- [ 8.150000] init: command 'write' r=0
- [ 8.160000] init: command 'write' r=0
- [ 8.160000] init: command 'write' r=0
- [ 8.170000] ep_matches, wrn: endpoint already claimed, ep(0xc0799b60, 0xe7bcb000, ep1-bulk)
- [ 8.180000] adb_bind_config
- [ 8.190000] ep_matches, wrn: endpoint already claimed, ep(0xc0799b60, 0xe7bcb000, ep1-bulk)
- [ 8.200000] ep_matches, wrn: endpoint already claimed, ep(0xc0799ba0, 0xe7bcb000, ep2-bulk)
- [ 8.200000] ep_matches, wrn: endpoint already claimed, ep(0xc0799b60, 0xe7bcb000, ep1-bulk)
- [ 8.210000] ep_matches, wrn: endpoint already claimed, ep(0xc0799ba0, 0xe7bcb000, ep2-bulk)
- [ 8.220000] ep_matches, wrn: endpoint already claimed, ep(0xc0799be0, 0xe7bc1b80, ep3-bulk)
- [ 8.230000] [sw_udc]: alloc request: ep(0xc0799c20, ep4-bulk, 512), req(0xe7374dc0)
- [ 8.240000] [sw_udc]: alloc request: ep(0xc0799be0, ep3-bulk, 512), req(0xe7374d80)
- [ 8.250000] [sw_udc]: alloc request: ep(0xc0799be0, ep3-bulk, 512), req(0xe7374e00)
- [ 8.250000] [sw_udc]: alloc request: ep(0xc0799be0, ep3-bulk, 512), req(0xe7374cc0)
- [ 8.270000] [sw_udc]: alloc request: ep(0xc0799be0, ep3-bulk, 512), req(0xe7374e40)
- [ 8.270000] [sw_udc]: sw_udc_pullup, is_on = 1
- [ 8.280000] WRN:L2738(drivers/usb/sun4i_usb/udc/sw_udc.c):ERR: usb device is not active
- [ 8.290000] init: command 'write' r=0
- [ 8.290000] init: starting 'adbd'
- [ 8.290000] init: command 'start' r=0
- [ 8.300000] adb_open
- [ 8.300000] init: command 'setprop' r=0
- [ 14.220000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- [ 15.880000] BatteryStats-Wr used greatest stack depth: 5648 bytes left
- [ 17.260000] dexopt used greatest stack depth: 5624 bytes left
- [ 25.520000] request_suspend_state: wakeup (3->0) at 25520235141 (2012-04-24 18:29:24.716448087 UTC)
- [ 25.950000] acc_open
- [ 25.950000] acc_release
- [ 28.780000] netd used greatest stack depth: 5456 bytes left
- [ 28.780000] netd used greatest stack depth: 5416 bytes left
- [ 35.730000] init: processing action 0x2e3d0 (property:sys.boot_completed=1)
- [ 35.790000] init: starting 'preinstall'
- [ 35.800000] init: command 'start' r=0
- [ 35.800000] init: service 'bootanim' is being killed
- [ 35.830000] init: waitpid returned pid 135, status = 00000009
- [ 35.890000] init: process 'bootanim', pid 135 exited
- [ 36.010000] init: waitpid returned pid 481, status = 00000000
- [ 36.010000] init: process 'preinstall', pid 481 exited
- [ 72.410000] battery vol change: 56->55
- [ 95.820000] [pm]valid
- [ 95.820000] request_suspend_state: sleep (0->3) at 95823338909 (2012-04-24 18:30:35.019535479 UTC)
- [ 95.830000] mma7660 early suspend
- [ 95.830000] [AXP]======early suspend=======
- [ 95.890000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 95.930000] display early suspend: backlight_early_suspend
- [ 96.950000] =======goodix_ts_early_suspend========
- [ 96.950000] Goodix-TS 2-005d: Send suspend cmd
- [ 100.830000] [pm]valid
- [ 100.830000] PM: Syncing filesystems ... done.
- [ 100.840000] PM: Preparing system for mem sleep
- [ 100.860000] Freezing user space processes ... (elapsed 0.03 seconds) done.
- [ 100.900000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 100.920000] PM: Entering mem sleep
- [ 100.920000] [pm]3 state begin
- [ 100.930000] [CSI]csi_suspend
- [ 100.930000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 100.940000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 100.940000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 100.950000] [audio codec]:suspend start5000
- [ 101.610000] [audio codec]:suspend end
- [ 101.610000] pmu_suspend_chgcur = 1000000
- [ 101.620000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 101.620000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:40
- [ 101.630000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 101.630000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:40
- [ 101.640000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 101.640000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:40
- [ 101.650000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 101.660000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:40
- [ 101.660000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 101.670000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:40
- [ 101.670000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 101.680000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 101.690000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 101.690000] [sw-ohci1]: close clock
- [ 101.700000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 101.700000] [sw-ehci1]: Set USB Power OFF
- [ 101.700000] [sw-ehci1]: close clock
- [ 101.710000] [sw_hcd0]: sw_hcd_suspend start
- [ 101.710000] wrn: hcd is disable, need not enter to suspend
- [ 101.720000] [sw_udc]: sw_udc_suspend start
- [ 101.720000] [sw_udc]: udc is disable, need not enter to suspend
- [ 101.730000] [i2c2] suspend okay..
- [ 101.740000] [i2c1] suspend okay..
- [ 101.740000] [NAND] nand_suspend
- [ 101.740000] [NAND] nand_suspend ok
- [ 101.750000] [sw_dmac_suspend] enter
- [ 101.750000] PM: suspend of devices complete after 823.123 msecs
- [ 101.760000] [pm]prepare
- [ 101.760000] PM: late suspend of devices complete after 1.104 msecs
- [ 101.770000] [pm]prepare_late
- [ 101.770000] [pm]enter state 3
- [ 101.770000] [pm]platform wakeup, wakesource is:0x1
- [ 101.780000] PM: early resume of devices complete after 0.696 msecs
- [ 101.790000] [pm]platform wakeup finish
- [ 101.790000] [sw_dmac_resume] enter
- [ 101.790000] [NAND] nand_resume
- [ 101.800000] [NAND] nand gpio_request
- [ 101.800000] twi1, apb clock = 24000000
- [ 101.810000] [i2c1] resume okay..
- [ 101.810000] twi2, apb clock = 24000000
- [ 101.810000] [i2c2] resume okay..
- [ 101.820000] [sw_udc]: sw_udc_resume start
- [ 101.820000] [sw_udc]: udc is disable, need not enter to resume
- [ 101.830000] [sw_hcd0]: sw_hcd_resume start
- [ 101.830000] wrn: hcd is disable, need not resume
- [ 101.850000] wemac wemac.0: resetting device
- [ 101.850000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 101.860000] [sw-ehci1]: open clock
- [ 101.880000] [sw-ehci1]: Set USB Power ON
- [ 101.880000] [sw-ehci1]: lost power, restarting
- [ 101.890000] usb usb2: root hub lost power or was reset
- [ 102.040000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 102.040000] [sw-ohci1]: open clock
- [ 102.120000] usb usb3: root hub lost power or was reset
- [ 102.360000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 102.360000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 102.370000] wakeup wake lock: event0-148
- [ 102.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 102.380000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:30:51
- [ 102.380000] [AXP]press short
- [ 102.390000] [AXP]=======================val = 0x0
- [ 102.390000] pmu_resume_chgcur = 300000
- [ 102.400000] [audio codec]:resume start
- [ 102.400000] codec_resume_events,1271
- [ 102.410000] [audio codec]:resume end
- [ 102.410000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 102.410000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 102.420000] [mmc_pm]: No sdio card, please check your config !!
- [ 102.430000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 102.500000] [AXP]event = 0x20000
- [ 102.540000] [CSI]csi_resume
- [ 102.540000] PM: resume of devices complete after 749.083 msecs
- [ 102.540000] [pm]aw_pm_end!
- [ 102.550000] PM: Finishing wakeup.
- [ 102.550000] Restarting tasks ...
- [ 102.570000] request_suspend_state: wakeup (3->0) at 102575585077 (2012-04-24 18:30:52.072443253 UTC)
- [ 102.580000] done.
- [ 102.580000] suspend: exit suspend, ret = 0 (2012-04-24 18:30:52.085240645 UTC)
- [ 102.590000] =======goodix_ts_late_resume========
- [ 102.690000] display late resume enter: backlight_late_resume
- [ 103.080000] ====pa turn on===
- [ 103.270000] display late resume done: backlight_late_resume
- [ 103.270000] enter laterresume: sun4i_keyboard_resume.
- [ 103.280000] [AXP]======late resume=======
- [ 103.290000] mma7660 late resume
- [ 122.440000] battery vol change: 55->54
- [ 140.220000] netd used greatest stack depth: 5288 bytes left
- [ 162.540000] battery vol change: 54->53
- [ 202.620000] battery vol change: 53->52
- [ 383.040000] battery vol change: 52->51
- [ 456.480000] sw_usb_enable_hcd: usbc_num = 2
- [ 456.480000] [sw-ehci2]: sw_usb_enable_ehci
- [ 456.480000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 456.490000] [sw-ehci2]: open clock
- [ 456.520000] [sw-ehci2]: Set USB Power ON
- [ 456.520000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 456.540000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 456.540000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
- [ 456.580000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 456.580000] ehci_irq: port change detect
- [ 456.600000] hub 4-0:1.0: USB hub found
- [ 456.600000] hub 4-0:1.0: 1 port detected
- [ 456.610000] [sw-ohci2]: sw_usb_enable_ohci
- [ 456.610000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 456.620000] [sw-ohci2]: open clock
- [ 456.660000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 456.680000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- [ 456.690000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
- [ 456.760000] hub 5-0:1.0: USB hub found
- [ 456.760000] hub 5-0:1.0: 1 port detected
- [ 456.780000] rtw driver version=v3.4.1_3418.20120217
- [ 456.790000] Build at: Mar 23 2012 08:09:43
- [ 456.790000] ##########rtw_suspend_lock_init ###########
- [ 456.800000] usbcore: registered new interface driver rtl8192cu
- [ 456.920000] usb 4-1: new high speed USB device number 2 using sw-ehci
- [ 457.090000] register rtw_netdev_ops to netdev_ops
- [ 457.110000] rtw_wdev_alloc
- [ 457.120000] CHIP TYPE: RTL8188C_8192C
- [ 457.120000]
- [ 457.120000] usb_endpoint_descriptor(0):
- [ 457.140000] bLength=7
- [ 457.140000] bDescriptorType=5
- [ 457.160000] bEndpointAddress=81
- [ 457.160000] wMaxPacketSize=200
- [ 457.160000] bInterval=0
- [ 457.170000] RT_usb_endpoint_is_bulk_in = 1
- [ 457.170000]
- [ 457.170000] usb_endpoint_descriptor(1):
- [ 457.200000] bLength=7
- [ 457.200000] bDescriptorType=5
- [ 457.200000] bEndpointAddress=2
- [ 457.210000] wMaxPacketSize=200
- [ 457.210000] bInterval=0
- [ 457.210000] RT_usb_endpoint_is_bulk_out = 2
- [ 457.240000]
- [ 457.240000] usb_endpoint_descriptor(2):
- [ 457.240000] bLength=7
- [ 457.240000] bDescriptorType=5
- [ 457.250000] bEndpointAddress=3
- [ 457.250000] wMaxPacketSize=200
- [ 457.250000] bInterval=0
- [ 457.260000] RT_usb_endpoint_is_bulk_out = 3
- [ 457.260000]
- [ 457.260000] usb_endpoint_descriptor(3):
- [ 457.270000] bLength=7
- [ 457.310000] bDescriptorType=5
- [ 457.310000] bEndpointAddress=84
- [ 457.310000] wMaxPacketSize=40
- [ 457.350000] bInterval=1
- [ 457.350000] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 457.360000] nr_endpoint=4, in_num=2, out_num=2
- [ 457.360000]
- [ 457.360000] USB_SPEED_HIGH
- [ 457.360000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
- [ 457.370000] RF_Type is 3!!
- [ 457.380000] EEPROM type is E-FUSE
- [ 457.380000] ====> ReadAdapterInfo8192C
- [ 457.390000] Boot from EFUSE, Autoload OK !
- [ 457.570000] EEPROMVID = 0x0bda
- [ 457.570000] EEPROMPID = 0x8176
- [ 457.570000] EEPROMCustomerID : 0x00
- [ 457.580000] EEPROMSubCustomerID: 0x00
- [ 457.580000] RT_CustomerID: 0x00
- [ 457.590000] _ReadMACAddress MAC Address from EFUSE = 00:f2:4c:06:e2:fc
- [ 457.600000] EEPROMRegulatory = 0x0
- [ 457.600000] _ReadBoardType(0)
- [ 457.600000] BT Coexistance = disable
- [ 457.610000] RT_ChannelPlan: 0x0a
- [ 457.620000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
- [ 457.630000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 457.630000] ### AntDivCfg(0)
- [ 457.640000] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 457.640000] <==== ReadAdapterInfo8192C in 260 ms
- [ 457.650000] rtw_register_early_suspend
- [ 457.660000]
- [ 457.660000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
- [ 457.670000]
- [ 457.670000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
- [ 457.690000] rtw_macaddr_cfg MAC Address = 00:f2:4c:06:e2:fc
- [ 457.690000] MAC Address from pnetdev->dev_addr= 00:f2:4c:06:e2:fc
- [ 457.710000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 458.390000] init: starting 'wpa_supplicant'
- [ 458.390000] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
- [ 458.540000] +871x_drv - drv_open, bup=0
- [ 458.550000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 458.560000] FirmwareDownload92C accquire FW from embedded image
- [ 458.560000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 458.600000] fw download ok!
- [ 458.610000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 459.010000] IQK:Start!!!
- [ 459.030000] Path A Rx IQK fail!!
- [ 459.030000] Path A Rx IQK fail!!
- [ 459.070000] Path A IQK Only Tx Success!!
- [ 459.100000] Path A Rx IQK fail!!
- [ 459.120000] Path A Rx IQK fail!!
- [ 459.120000] Path A IQK Only Tx Success!!
- [ 459.130000] init: waitpid returned pid 902, status = 00000000
- [ 459.140000] init: untracked pid 902 exited
- [ 459.150000] IQK: final_candidate is 0
- [ 459.150000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 459.150000] Path A IQ Calibration Success !
- [ 459.170000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 459.310000] pdmpriv->TxPowerTrackControl = 1
- [ 459.320000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 459.320000] rtl8192cu_hal_init in 780ms
- [ 459.320000] MAC Address = 00:f2:4c:06:e2:fc
- [ 459.340000] rtw_cfg80211_init_wiphy:rf_type=3
- [ 459.340000] -871x_drv - drv_open, bup=1
- [ 459.340000] cfg80211_rtw_set_power_mgmt
- [ 459.350000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 459.370000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 459.380000] set_mode = IW_MODE_INFRA
- [ 459.400000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 460.780000] survey done event(9)
- [ 460.780000] rtw_cfg80211_indicate_scan_done without scan req
- [ 460.790000] =>rtw_wx_set_essid
- [ 460.790000] <=rtw_wx_set_essid, ret 0
- [ 460.800000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 460.810000] set_mode = IW_MODE_INFRA
- [ 460.820000]
- [ 460.820000] wpa_ie(length:22):
- [ 460.820000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 460.830000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 460.830000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
- [ 460.840000] Set BSSID under fw_state=0x00000008
- [ 460.840000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-56
- [ 460.850000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 460.860000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 460.870000] link to Artheros AP
- [ 460.870000] set ch/bw before connected
- [ 460.880000] =>rtw_wx_set_essid
- [ 460.880000] ssid=lll, len=3
- [ 460.880000] Set SSID under fw_state=0x00000088
- [ 460.890000] <=rtw_wx_set_essid, ret 0
- [ 460.950000] link to Artheros AP
- [ 460.950000] issue_deauth
- [ 460.960000] OnAuthClient
- [ 460.960000] network.SupportedRates[0]=82
- [ 460.970000] network.SupportedRates[1]=84
- [ 460.970000] network.SupportedRates[2]=8B
- [ 460.980000] network.SupportedRates[3]=96
- [ 460.980000] network.SupportedRates[4]=0C
- [ 460.980000] network.SupportedRates[5]=12
- [ 460.990000] network.SupportedRates[6]=18
- [ 460.990000] network.SupportedRates[7]=24
- [ 460.990000] network.SupportedRates[8]=30
- [ 461.000000] network.SupportedRates[9]=48
- [ 461.000000] network.SupportedRates[10]=60
- [ 461.010000] network.SupportedRates[11]=6C
- [ 461.010000] bssrate_len = 12
- [ 461.020000] OnAssocRsp
- [ 461.020000] report_join_res(3)
- [ 461.030000] rtw_joinbss_update_network
- [ 461.030000] +rtw_update_ht_cap()
- [ 461.030000] rtw_joinbss_update_stainfo
- [ 461.040000] rtw_cfg80211_indicate_connect
- [ 461.040000] OnAction_back
- [ 461.040000] OnAction_back, action=0
- [ 461.050000] issue_action_BA, category=3, action=1, status=0
- [ 461.060000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 461.070000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 461.080000]
- [ 461.080000] ~~~~stastakey:unicastkey
- [ 461.080000]
- [ 461.080000] ~~~~stastakey:groupkey
- [ 461.100000] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
- [ 461.120000] init: starting 'dhcpcd_wlan0'
- [ 461.130000] WMM(0): 0, a42b
- [ 461.130000] WMM(1): 0, a44f
- [ 461.160000] WMM(2): 0, 5e4322
- [ 461.160000] WMM(3): 0, 2f3222
- [ 461.160000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 461.170000] HTOnAssocRsp
- [ 461.200000] update raid entry, mask=0xfffff, arg=0xa0
- [ 461.200000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 461.220000] SetFwRsvdPagePkt
- [ 461.220000] Set RSVD page location to Fw.
- [ 461.230000] =>mlmeext_joinbss_event_callback
- [ 461.340000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 468.400000] sunxi-rtc sunxi-rtc: set time 2012-4-24 18:37:23
- [ 471.420000] wlan0: no IPv6 routers present
- [ 473.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 473.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 473.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 477.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 477.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 479.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 479.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 481.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 481.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 481.390000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 483.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 483.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 483.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 485.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 485.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 485.350000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 493.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 493.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 493.370000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 495.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 495.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 497.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 497.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 501.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 501.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 501.350000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 503.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 503.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 503.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 513.340000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 513.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 515.340000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 515.680000] EXT4-fs (nandd): re-mounted. Opts: (null)
- [ 517.780000] EXT4-fs (nandd): re-mounted. Opts: (null)
- [ 519.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 519.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 519.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 548.070000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 548.070000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 549.340000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 549.460000] survey done event(7)
- [ 549.480000] rtw_cfg80211_indicate_scan_done without scan req
- [ 551.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 551.350000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 551.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 558.090000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 558.090000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 559.340000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 559.470000] survey done event(a)
- [ 559.490000] rtw_cfg80211_indicate_scan_done without scan req
- [ 561.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 561.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 561.350000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 566.840000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 566.840000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 567.340000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 568.260000] survey done event(4)
- [ 568.280000] rtw_cfg80211_indicate_scan_done without scan req
- [ 569.350000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 569.350000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 569.380000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 569.770000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 569.790000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 571.140000] survey done event(6)
- [ 571.160000] rtw_cfg80211_indicate_scan_done without scan req
- [ 571.340000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 571.340000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 575.000000] rtw_cfg80211_indicate_disconnect
- [ 575.010000] pwdev->sme_state=0
- [ 575.010000] issue_deauth
- [ 575.020000] OnDeAuth Reason code(6)
- [ 575.020000] receive_disconnect
- [ 575.030000] init: service 'dhcpcd_wlan0' is being killed
- [ 575.040000] OnDeAuth Reason code(6)
- [ 575.040000] receive_disconnect
- [ 575.050000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 575.060000] init: waitpid returned pid 914, status = 00000009
- [ 575.060000] init: process 'dhcpcd_wlan0', pid 914 exited
- [ 575.090000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 575.100000] OnDeAuth Reason code(6)
- [ 575.100000] receive_disconnect
- [ 575.140000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 575.340000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 577.030000] ==>pwr_state_check_handler .fw_state(8)
- [ 577.030000] ==> rtw_ps_cmd , enqueue CMD
- [ 577.030000] ==>rtw_ps_processor .fw_state(8)
- [ 577.050000] ==>ips_enter cnts:1
- [ 577.050000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020808)....
- [ 577.050000]
- [ 577.060000] ===> rtw_ips_pwr_down...................
- [ 577.070000] ====> rtw_ips_dev_unload...
- [ 577.110000] usb_read_port_cancel
- [ 577.110000] usb_write_port_cancel
- [ 577.110000] ==> rtl8192cu_hal_deinit
- [ 577.130000] bkeepfwalive(0)
- [ 577.130000] card disble without HWSM...........
- [ 577.150000] <=== rtw_ips_pwr_down..................... in 90ms
- [ 579.780000]
- [ 579.780000] rfpwrstate_check call ips_leave....
- [ 579.790000] ==>ips_leave cnts:1
- [ 579.790000] ===> rtw_ips_pwr_up..............
- [ 579.800000] ===> ips_netdrv_open.........
- [ 579.810000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 579.810000] FirmwareDownload92C accquire FW from embedded image
- [ 579.820000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 579.850000] fw download ok!
- [ 579.860000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 580.250000] IQK:Start!!!
- [ 580.270000] Path A IQK Success!!
- [ 580.280000] Path A Rx IQK fail!!
- [ 580.280000] Path A Rx IQK fail!!
- [ 580.290000] Path A IQK Only Tx Success!!
- [ 580.300000] Path A IQK Success!!
- [ 580.310000] IQK: final_candidate is 0
- [ 580.310000] IQK: RegE94=103 RegE9C=c RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 580.310000] Path A IQ Calibration Success !
- [ 580.440000] pdmpriv->TxPowerTrackControl = 1
- [ 580.450000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 580.450000] rtl8192cu_hal_init in 650ms
- [ 580.460000] <=== rtw_ips_pwr_up.............. in 670ms
- [ 580.460000] ==> ips_leave.....LED(0x00028080)...
- [ 581.780000] survey done event(8)
- [ 581.780000] rtw_cfg80211_indicate_scan_done without scan req
- [ 582.460000] ==>pwr_state_check_handler .fw_state(8)
- [ 582.460000] ==> rtw_ps_cmd , enqueue CMD
- [ 582.460000] ==>rtw_ps_processor .fw_state(8)
- [ 582.470000] ==>ips_enter cnts:2
- [ 582.470000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000)....
- [ 582.470000]
- [ 582.480000] ===> rtw_ips_pwr_down...................
- [ 582.490000] ====> rtw_ips_dev_unload...
- [ 582.510000] usb_read_port_cancel
- [ 582.520000] usb_write_port_cancel
- [ 582.520000] ==> rtl8192cu_hal_deinit
- [ 582.530000] bkeepfwalive(0)
- [ 582.530000] card disble without HWSM...........
- [ 582.540000] <=== rtw_ips_pwr_down..................... in 60ms
- [ 582.620000]
- [ 582.620000] rfpwrstate_check call ips_leave....
- [ 582.640000] ==>ips_leave cnts:2
- [ 582.640000] ===> rtw_ips_pwr_up..............
- [ 582.640000] ===> ips_netdrv_open.........
- [ 582.680000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 582.690000] FirmwareDownload92C accquire FW from embedded image
- [ 582.700000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 582.730000] fw download ok!
- [ 582.730000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 583.130000] IQK:Start!!!
- [ 583.150000] Path A Rx IQK fail!!
- [ 583.150000] Path A Rx IQK fail!!
- [ 583.150000] Path A IQK Only Tx Success!!
- [ 583.170000] Path A Rx IQK fail!!
- [ 583.170000] Path A Rx IQK fail!!
- [ 583.170000] Path A IQK Only Tx Success!!
- [ 583.180000] IQK: final_candidate is 0
- [ 583.190000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 583.190000] Path A IQ Calibration Success !
- [ 583.200000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 583.320000] pdmpriv->TxPowerTrackControl = 1
- [ 583.330000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 583.330000] rtl8192cu_hal_init in 650ms
- [ 583.340000] <=== rtw_ips_pwr_up.............. in 700ms
- [ 583.340000] ==> ips_leave.....LED(0x00028080)...
- [ 583.370000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
- [ 583.380000] call rtw_indicate_scan_done when drv_close
- [ 583.380000] rtw_cfg80211_indicate_scan_done without scan req
- [ 583.400000] -871x_drv - drv_close, bup=1
- [ 583.410000] init: service 'wpa_supplicant' is being killed
- [ 583.420000] wpa_supplicant used greatest stack depth: 4968 bytes left
- [ 583.440000] init: waitpid returned pid 904, status = 00000009
- [ 583.440000] init: process 'wpa_supplicant', pid 904 exited
- [ 583.720000] +rtw_drv_halt
- [ 583.720000] ##########rtw_suspend_lock_uninit###########
- [ 583.730000] usbcore: deregistering interface driver rtl8192cu
- [ 583.730000] ###=> usb_read_port_complete => urb status(-108)
- [ 583.740000] +rtw_dev_remove
- [ 583.740000] rtw_unregister_early_suspend
- [ 583.750000] rtw_sta_flush
- [ 583.760000] ===> rtw_dev_unload
- [ 583.760000] usb_read_port_cancel
- [ 583.760000] usb_write_port_cancel
- [ 583.770000] ###> rtw_cmd_thread break.................
- [ 583.770000] rtw_cmd_thread: leaving... check & free all cmd_obj resources
- [ 583.780000] rtw_cmd_thread: leaving... call up terminate_cmdthread_sema
- [ 583.780000] ==> rtl8192cu_hal_deinit
- [ 583.790000] bkeepfwalive(0)
- [ 583.790000] card disble HWSM...........
- [ 583.800000] <=== rtw_dev_unload
- [ 583.800000] +r871xu_dev_remove, hw_init_completed=0
- [ 583.810000] free_recv_skb_queue not empty, 4
- [ 583.810000] rtw_unregister_early_suspend
- [ 583.820000] =====> rtl8192c_free_hal_data =====
- [ 583.820000] <===== rtl8192c_free_hal_data =====
- [ 583.820000] rtw_wdev_free
- [ 583.830000] rtw_wdev_free, scan abort when device remove
- [ 583.830000] rtw_cfg80211_indicate_scan_done without scan req
- [ 583.840000] usb attached..., try to reset usb device
- [ 583.970000] usb 4-1: reset high speed USB device number 2 using sw-ehci
- [ 584.120000] -r871xu_dev_remove, done
- [ 584.120000] -rtw_drv_halt
- [ 584.120000] sw_usb_disable_hcd: usbc_num = 2
- [ 584.130000] [sw-ehci2]: sw_usb_disable_ehci
- [ 584.130000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 584.140000] sw-ehci sw-ehci.2: remove, state 1
- [ 584.140000] usb usb4: USB disconnect, device number 1
- [ 584.150000] usb 4-1: USB disconnect, device number 2
- [ 584.160000] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 584.170000] [sw-ehci2]: close clock
- [ 584.170000] [sw-ohci2]: sw_usb_disable_ohci
- [ 584.180000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 584.180000] sw-ohci sw-ohci.2: remove, state 1
- [ 584.190000] usb usb5: USB disconnect, device number 1
- [ 584.210000] hub 5-0:1.0: hub_port_status failed (err = -19)
- [ 584.210000] hub 5-0:1.0: connect-debounce failed, port 1 disabled
- [ 584.220000] sw-ohci sw-ohci.2: USB bus 5 deregistered
- [ 584.220000] [sw-ohci2]: Set USB Power OFF
- [ 584.230000] [sw-ohci2]: close clock
- [ 588.050000] sw_usb_enable_hcd: usbc_num = 2
- [ 588.050000] [sw-ehci2]: sw_usb_enable_ehci
- [ 588.050000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 588.060000] [sw-ehci2]: open clock
- [ 588.090000] [sw-ehci2]: Set USB Power ON
- [ 588.090000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 588.100000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 588.110000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
- [ 588.130000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 588.130000] ehci_irq: port change detect
- [ 588.140000] hub 4-0:1.0: USB hub found
- [ 588.140000] hub 4-0:1.0: 1 port detected
- [ 588.150000] [sw-ohci2]: sw_usb_enable_ohci
- [ 588.150000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 588.160000] [sw-ohci2]: open clock
- [ 588.180000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 588.190000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- [ 588.200000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
- [ 588.260000] hub 5-0:1.0: USB hub found
- [ 588.270000] hub 5-0:1.0: 1 port detected
- [ 588.270000] rtw driver version=v3.4.1_3418.20120217
- [ 588.280000] Build at: Mar 23 2012 08:09:43
- [ 588.280000] ##########rtw_suspend_lock_init ###########
- [ 588.290000] usbcore: registered new interface driver rtl8192cu
- [ 588.470000] usb 4-1: new high speed USB device number 2 using sw-ehci
- [ 588.620000] register rtw_netdev_ops to netdev_ops
- [ 588.620000] rtw_wdev_alloc
- [ 588.640000] CHIP TYPE: RTL8188C_8192C
- [ 588.640000]
- [ 588.640000] usb_endpoint_descriptor(0):
- [ 588.650000] bLength=7
- [ 588.650000] bDescriptorType=5
- [ 588.660000] bEndpointAddress=81
- [ 588.660000] wMaxPacketSize=200
- [ 588.660000] bInterval=0
- [ 588.660000] RT_usb_endpoint_is_bulk_in = 1
- [ 588.670000]
- [ 588.670000] usb_endpoint_descriptor(1):
- [ 588.670000] bLength=7
- [ 588.680000] bDescriptorType=5
- [ 588.680000] bEndpointAddress=2
- [ 588.680000] wMaxPacketSize=200
- [ 588.690000] bInterval=0
- [ 588.690000] RT_usb_endpoint_is_bulk_out = 2
- [ 588.690000]
- [ 588.690000] usb_endpoint_descriptor(2):
- [ 588.700000] bLength=7
- [ 588.700000] bDescriptorType=5
- [ 588.700000] bEndpointAddress=3
- [ 588.710000] wMaxPacketSize=200
- [ 588.710000] bInterval=0
- [ 588.710000] RT_usb_endpoint_is_bulk_out = 3
- [ 588.720000]
- [ 588.720000] usb_endpoint_descriptor(3):
- [ 588.720000] bLength=7
- [ 588.720000] bDescriptorType=5
- [ 588.730000] bEndpointAddress=84
- [ 588.730000] wMaxPacketSize=40
- [ 588.730000] bInterval=1
- [ 588.740000] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 588.740000] nr_endpoint=4, in_num=2, out_num=2
- [ 588.740000]
- [ 588.750000] USB_SPEED_HIGH
- [ 588.750000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
- [ 588.760000] RF_Type is 3!!
- [ 588.760000] EEPROM type is E-FUSE
- [ 588.760000] ====> ReadAdapterInfo8192C
- [ 588.770000] Boot from EFUSE, Autoload OK !
- [ 588.920000] EEPROMVID = 0x0bda
- [ 588.920000] EEPROMPID = 0x8176
- [ 588.940000] EEPROMCustomerID : 0x00
- [ 588.940000] EEPROMSubCustomerID: 0x00
- [ 588.940000] RT_CustomerID: 0x00
- [ 588.980000] _ReadMACAddress MAC Address from EFUSE = 00:f2:4c:06:e2:fc
- [ 588.980000] EEPROMRegulatory = 0x0
- [ 589.010000] _ReadBoardType(0)
- [ 589.040000] BT Coexistance = disable
- [ 589.050000] RT_ChannelPlan: 0x0a
- [ 589.050000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
- [ 589.060000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 589.060000] ### AntDivCfg(0)
- [ 589.070000] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 589.070000] <==== ReadAdapterInfo8192C in 310 ms
- [ 589.080000] rtw_register_early_suspend
- [ 589.080000]
- [ 589.080000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
- [ 589.090000]
- [ 589.090000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
- [ 589.100000] rtw_macaddr_cfg MAC Address = 00:f2:4c:06:e2:fc
- [ 589.100000] MAC Address from pnetdev->dev_addr= 00:f2:4c:06:e2:fc
- [ 589.110000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 589.310000] init: starting 'wpa_supplicant'
- [ 589.320000] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
- [ 589.340000] +871x_drv - drv_open, bup=0
- [ 589.340000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 589.350000] FirmwareDownload92C accquire FW from embedded image
- [ 589.360000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 589.390000] fw download ok!
- [ 589.390000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 589.780000] IQK:Start!!!
- [ 589.800000] Path A Rx IQK fail!!
- [ 589.800000] Path A Rx IQK fail!!
- [ 589.800000] Path A IQK Only Tx Success!!
- [ 589.820000] Path A Rx IQK fail!!
- [ 589.820000] Path A Rx IQK fail!!
- [ 589.820000] Path A IQK Only Tx Success!!
- [ 589.830000] IQK: final_candidate is 0
- [ 589.840000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 589.840000] Path A IQ Calibration Success !
- [ 589.850000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 589.970000] pdmpriv->TxPowerTrackControl = 1
- [ 589.980000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 589.980000] rtl8192cu_hal_init in 640ms
- [ 589.990000] MAC Address = 00:f2:4c:06:e2:fc
- [ 590.000000] rtw_cfg80211_init_wiphy:rf_type=3
- [ 590.000000] -871x_drv - drv_open, bup=1
- [ 590.000000] cfg80211_rtw_set_power_mgmt
- [ 590.010000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 590.020000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 590.020000] set_mode = IW_MODE_INFRA
- [ 590.030000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 590.650000] init: waitpid returned pid 1047, status = 00000000
- [ 590.660000] init: untracked pid 1047 exited
- [ 591.380000] survey done event(4)
- [ 591.380000] rtw_cfg80211_indicate_scan_done without scan req
- [ 592.070000] ==>pwr_state_check_handler .fw_state(8)
- [ 592.070000] ==> rtw_ps_cmd , enqueue CMD
- [ 592.070000] ==>rtw_ps_processor .fw_state(8)
- [ 592.080000] ==>ips_enter cnts:1
- [ 592.080000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020800)....
- [ 592.080000]
- [ 592.090000] ===> rtw_ips_pwr_down...................
- [ 592.100000] ====> rtw_ips_dev_unload...
- [ 592.120000] usb_read_port_cancel
- [ 592.130000] usb_write_port_cancel
- [ 592.130000] ==> rtl8192cu_hal_deinit
- [ 592.140000] bkeepfwalive(0)
- [ 592.140000] card disble without HWSM...........
- [ 592.150000] <=== rtw_ips_pwr_down..................... in 60ms
- [ 596.290000]
- [ 596.290000] rfpwrstate_check call ips_leave....
- [ 596.300000] ==>ips_leave cnts:1
- [ 596.300000] ===> rtw_ips_pwr_up..............
- [ 596.310000] ===> ips_netdrv_open.........
- [ 596.320000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 596.330000] FirmwareDownload92C accquire FW from embedded image
- [ 596.330000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 596.380000] fw download ok!
- [ 596.400000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 596.880000] IQK:Start!!!
- [ 596.900000] Path A Rx IQK fail!!
- [ 596.900000] Path A Rx IQK fail!!
- [ 596.900000] Path A IQK Only Tx Success!!
- [ 596.920000] Path A Rx IQK fail!!
- [ 596.920000] Path A Rx IQK fail!!
- [ 596.920000] Path A IQK Only Tx Success!!
- [ 596.930000] IQK: final_candidate is 0
- [ 596.940000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 596.940000] Path A IQ Calibration Success !
- [ 596.950000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 597.070000] pdmpriv->TxPowerTrackControl = 1
- [ 597.080000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 597.080000] rtl8192cu_hal_init in 770ms
- [ 597.090000] <=== rtw_ips_pwr_up.............. in 790ms
- [ 597.090000] ==> ips_leave.....LED(0x00028080)...
- [ 598.430000] survey done event(b)
- [ 598.430000] rtw_cfg80211_indicate_scan_done without scan req
- [ 598.440000] =>rtw_wx_set_essid
- [ 598.440000] <=rtw_wx_set_essid, ret 0
- [ 598.450000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 598.460000] set_mode = IW_MODE_INFRA
- [ 598.460000]
- [ 598.460000] wpa_ie(length:22):
- [ 598.470000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 598.470000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 598.480000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0xe7
- [ 598.480000] Set BSSID under fw_state=0x00000008
- [ 598.490000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-66
- [ 598.500000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 598.500000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 598.510000] link to Artheros AP
- [ 598.510000] set ch/bw before connected
- [ 598.520000] =>rtw_wx_set_essid
- [ 598.520000] ssid=lll, len=3
- [ 598.520000] Set SSID under fw_state=0x00000088
- [ 598.530000] <=rtw_wx_set_essid, ret 0
- [ 598.580000] link to Artheros AP
- [ 598.580000] issue_deauth
- [ 598.590000] OnAuthClient
- [ 598.600000] network.SupportedRates[0]=82
- [ 598.600000] network.SupportedRates[1]=84
- [ 598.600000] network.SupportedRates[2]=8B
- [ 598.610000] network.SupportedRates[3]=96
- [ 598.610000] network.SupportedRates[4]=0C
- [ 598.620000] network.SupportedRates[5]=12
- [ 598.620000] network.SupportedRates[6]=18
- [ 598.620000] network.SupportedRates[7]=24
- [ 598.630000] network.SupportedRates[8]=30
- [ 598.630000] network.SupportedRates[9]=48
- [ 598.640000] network.SupportedRates[10]=60
- [ 598.640000] network.SupportedRates[11]=6C
- [ 598.640000] bssrate_len = 12
- [ 598.660000] OnAssocRsp
- [ 598.660000] report_join_res(3)
- [ 598.660000] rtw_joinbss_update_network
- [ 598.660000] +rtw_update_ht_cap()
- [ 598.670000] rtw_joinbss_update_stainfo
- [ 598.670000] rtw_cfg80211_indicate_connect
- [ 598.680000] OnAction_back
- [ 598.680000] OnAction_back, action=0
- [ 598.680000] issue_action_BA, category=3, action=1, status=0
- [ 598.690000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 598.700000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 598.700000] WMM(0): 0, a42b
- [ 598.700000] WMM(1): 0, a44f
- [ 598.720000] WMM(2): 0, 5e4322
- [ 598.740000] WMM(3): 0, 2f3222
- [ 598.740000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 598.740000] HTOnAssocRsp
- [ 598.760000] update raid entry, mask=0xfffff, arg=0xa0
- [ 598.780000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 598.780000] SetFwRsvdPagePkt
- [ 598.800000] Set RSVD page location to Fw.
- [ 598.800000] =>mlmeext_joinbss_event_callback
- [ 598.830000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 598.830000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 600.990000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.830000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.830000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.840000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.850000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.850000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.860000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.870000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.870000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.880000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.890000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.890000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 601.900000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 602.100000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 603.500000] battery vol change: 51->50
- [ 603.990000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 607.000000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 608.660000] OnDeAuth Reason code(2)
- [ 608.660000] receive_disconnect
- [ 608.660000] report_del_sta_event: delete STA
- [ 608.680000] rtw_cfg80211_indicate_disconnect
- [ 608.690000] pwdev->sme_state=0
- [ 608.690000] OnDeAuth Reason code(6)
- [ 608.690000] receive_disconnect
- [ 608.700000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 610.100000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 611.030000] survey done event(2)
- [ 611.030000] rtw_cfg80211_indicate_scan_done without scan req
- [ 611.040000] =>rtw_wx_set_essid
- [ 611.040000] <=rtw_wx_set_essid, ret 0
- [ 611.050000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 611.060000] set_mode = IW_MODE_INFRA
- [ 611.060000]
- [ 611.060000] wpa_ie(length:22):
- [ 611.060000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 611.070000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 611.070000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
- [ 611.080000] Set BSSID under fw_state=0x00000008
- [ 611.090000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-69
- [ 611.090000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 611.100000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 611.110000] link to Artheros AP
- [ 611.110000] =>rtw_wx_set_essid
- [ 611.110000] ssid=lll, len=3
- [ 611.120000] set ch/bw before connected
- [ 611.120000] Set SSID under fw_state=0x00000088
- [ 611.130000] <=rtw_wx_set_essid, ret 0
- [ 611.180000] link to Artheros AP
- [ 611.180000] issue_deauth
- [ 611.190000] OnAuthClient
- [ 611.190000] network.SupportedRates[0]=82
- [ 611.200000] network.SupportedRates[1]=84
- [ 611.200000] network.SupportedRates[2]=8B
- [ 611.200000] network.SupportedRates[3]=96
- [ 611.210000] network.SupportedRates[4]=0C
- [ 611.210000] network.SupportedRates[5]=12
- [ 611.220000] network.SupportedRates[6]=18
- [ 611.220000] network.SupportedRates[7]=24
- [ 611.220000] network.SupportedRates[8]=30
- [ 611.230000] network.SupportedRates[9]=48
- [ 611.230000] network.SupportedRates[10]=60
- [ 611.230000] network.SupportedRates[11]=6C
- [ 611.240000] bssrate_len = 12
- [ 611.250000] OnAssocRsp
- [ 611.250000] report_join_res(3)
- [ 611.260000] rtw_joinbss_update_network
- [ 611.260000] +rtw_update_ht_cap()
- [ 611.260000] rtw_joinbss_update_stainfo
- [ 611.270000] rtw_cfg80211_indicate_connect
- [ 611.270000] OnAction_back
- [ 611.270000] OnAction_back, action=0
- [ 611.280000] issue_action_BA, category=3, action=1, status=0
- [ 611.280000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 611.310000] WMM(0): 0, a42b
- [ 611.310000] WMM(1): 0, a44f
- [ 611.310000] WMM(2): 0, 5e4322
- [ 611.340000] WMM(3): 0, 2f3222
- [ 611.340000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 611.340000] HTOnAssocRsp
- [ 611.370000] update raid entry, mask=0xfffff, arg=0xa0
- [ 611.400000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 611.400000] SetFwRsvdPagePkt
- [ 611.410000] Set RSVD page location to Fw.
- [ 611.420000] =>mlmeext_joinbss_event_callback
- [ 612.100000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 613.020000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 616.030000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 619.030000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.760000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.780000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.810000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.830000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.860000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.880000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.900000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.930000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 620.950000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.010000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.030000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.060000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.080000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.110000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.130000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.150000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.180000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.200000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.230000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 621.260000] OnDeAuth Reason code(2)
- [ 621.260000] receive_disconnect
- [ 621.270000] report_del_sta_event: delete STA
- [ 621.280000] rtw_cfg80211_indicate_disconnect
- [ 621.280000] pwdev->sme_state=0
- [ 621.280000] OnDeAuth Reason code(6)
- [ 621.290000] receive_disconnect
- [ 621.310000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 622.100000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 622.710000] survey done event(1)
- [ 622.710000] rtw_cfg80211_indicate_scan_done without scan req
- [ 622.720000] =>rtw_wx_set_essid
- [ 622.720000] <=rtw_wx_set_essid, ret 0
- [ 622.740000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 622.740000] set_mode = IW_MODE_INFRA
- [ 622.750000]
- [ 622.750000] wpa_ie(length:22):
- [ 622.750000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 622.760000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 622.760000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
- [ 622.770000] Set BSSID under fw_state=0x00000008
- [ 622.770000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-72
- [ 622.780000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 622.790000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 622.800000] link to Artheros AP
- [ 622.800000] =>rtw_wx_set_essid
- [ 622.800000] set ch/bw before connected
- [ 622.810000] ssid=lll, len=3
- [ 622.810000] Set SSID under fw_state=0x00000088
- [ 622.820000] <=rtw_wx_set_essid, ret 0
- [ 622.950000] link to Artheros AP
- [ 622.950000] issue_deauth
- [ 622.960000] OnAuthClient
- [ 622.960000] network.SupportedRates[0]=82
- [ 622.970000] network.SupportedRates[1]=84
- [ 622.970000] network.SupportedRates[2]=8B
- [ 622.980000] network.SupportedRates[3]=96
- [ 622.980000] network.SupportedRates[4]=0C
- [ 622.980000] network.SupportedRates[5]=12
- [ 622.990000] network.SupportedRates[6]=18
- [ 622.990000] network.SupportedRates[7]=24
- [ 623.000000] network.SupportedRates[8]=30
- [ 623.000000] network.SupportedRates[9]=48
- [ 623.000000] network.SupportedRates[10]=60
- [ 623.010000] network.SupportedRates[11]=6C
- [ 623.010000] bssrate_len = 12
- [ 623.020000] OnAssocRsp
- [ 623.030000] report_join_res(3)
- [ 623.030000] rtw_joinbss_update_network
- [ 623.030000] +rtw_update_ht_cap()
- [ 623.040000] rtw_joinbss_update_stainfo
- [ 623.040000] rtw_cfg80211_indicate_connect
- [ 623.050000] OnAction_back
- [ 623.050000] OnAction_back, action=0
- [ 623.050000] issue_action_BA, category=3, action=1, status=0
- [ 623.060000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 623.080000] WMM(0): 0, a42b
- [ 623.080000] WMM(1): 0, a44f
- [ 623.080000] WMM(2): 0, 5e4322
- [ 623.120000] WMM(3): 0, 2f3222
- [ 623.120000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 623.130000] HTOnAssocRsp
- [ 623.130000] update raid entry, mask=0xfffff, arg=0xa0
- [ 623.160000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 623.160000] SetFwRsvdPagePkt
- [ 623.180000] Set RSVD page location to Fw.
- [ 623.190000] =>mlmeext_joinbss_event_callback
- [ 624.100000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 625.040000] rx bc/mc packets, to perform sw rtw_aes_decrypt
- [ 628.780000] rtw_cfg80211_indicate_disconnect
- [ 628.790000] pwdev->sme_state=0
- [ 628.790000] issue_deauth
- [ 628.800000] ==>pwr_state_check_handler .fw_state(8)
- [ 628.800000] ==> rtw_ps_cmd , enqueue CMD
- [ 628.830000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
- [ 628.870000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 628.870000] ==>rtw_ps_processor .fw_state(8)
- [ 628.880000] call rtw_indicate_scan_done when drv_close
- [ 628.880000] rtw_cfg80211_indicate_scan_done without scan req
- [ 628.910000] ==>ips_enter cnts:2
- [ 628.910000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020008)....
- [ 628.910000]
- [ 628.930000] -871x_drv - drv_close, bup=1
- [ 628.950000] ===> rtw_ips_pwr_down...................
- [ 628.950000] ====> rtw_ips_dev_unload...
- [ 628.960000] init: service 'wpa_supplicant' is being killed
- [ 628.980000] init: waitpid returned pid 1050, status = 00000009
- [ 628.980000] init: process 'wpa_supplicant', pid 1050 exited
- [ 629.030000] usb_read_port_cancel
- [ 629.030000] usb_write_port_cancel
- [ 629.040000] ==> rtl8192cu_hal_deinit
- [ 629.040000] bkeepfwalive(0)
- [ 629.040000] card disble without HWSM...........
- [ 629.050000] <=== rtw_ips_pwr_down..................... in 100ms
- [ 629.270000] +rtw_drv_halt
- [ 629.270000] ##########rtw_suspend_lock_uninit###########
- [ 629.280000] usbcore: deregistering interface driver rtl8192cu
- [ 629.280000] +rtw_dev_remove
- [ 629.280000] rtw_unregister_early_suspend
- [ 629.290000] rtw_sta_flush
- [ 629.300000] ===> rtw_dev_unload
- [ 629.300000] usb_read_port_cancel
- [ 629.300000] usb_write_port_cancel
- [ 629.310000] ###> rtw_cmd_thread break.................
- [ 629.310000] rtw_cmd_thread: leaving... check & free all cmd_obj resources
- [ 629.320000] rtw_cmd_thread: leaving... call up terminate_cmdthread_sema
- [ 629.320000] ==> rtl8192cu_hal_deinit
- [ 629.330000] bkeepfwalive(0)
- [ 629.330000] card disble HWSM...........
- [ 629.340000] <=== rtw_dev_unload
- [ 629.340000] +r871xu_dev_remove, hw_init_completed=0
- [ 629.350000] free_recv_skb_queue not empty, 4
- [ 629.350000] rtw_unregister_early_suspend
- [ 629.350000] =====> rtl8192c_free_hal_data =====
- [ 629.360000] <===== rtl8192c_free_hal_data =====
- [ 629.360000] rtw_wdev_free
- [ 629.370000] rtw_wdev_free, scan abort when device remove
- [ 629.370000] rtw_cfg80211_indicate_scan_done without scan req
- [ 629.380000] usb attached..., try to reset usb device
- [ 629.510000] usb 4-1: reset high speed USB device number 2 using sw-ehci
- [ 629.660000] -r871xu_dev_remove, done
- [ 629.660000] -rtw_drv_halt
- [ 629.660000] sw_usb_disable_hcd: usbc_num = 2
- [ 629.670000] [sw-ehci2]: sw_usb_disable_ehci
- [ 629.670000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 629.680000] sw-ehci sw-ehci.2: remove, state 1
- [ 629.680000] usb usb4: USB disconnect, device number 1
- [ 629.690000] usb 4-1: USB disconnect, device number 2
- [ 629.700000] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 629.710000] [sw-ehci2]: close clock
- [ 629.710000] [sw-ohci2]: sw_usb_disable_ohci
- [ 629.710000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 629.720000] sw-ohci sw-ohci.2: remove, state 1
- [ 629.730000] usb usb5: USB disconnect, device number 1
- [ 629.750000] hub 5-0:1.0: hub_port_status failed (err = -19)
- [ 629.750000] hub 5-0:1.0: connect-debounce failed, port 1 disabled
- [ 629.760000] sw-ohci sw-ohci.2: USB bus 5 deregistered
- [ 629.760000] [sw-ohci2]: Set USB Power OFF
- [ 629.770000] [sw-ohci2]: close clock
- [ 632.440000] sw_usb_enable_hcd: usbc_num = 2
- [ 632.440000] [sw-ehci2]: sw_usb_enable_ehci
- [ 632.450000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 632.460000] [sw-ehci2]: open clock
- [ 632.480000] [sw-ehci2]: Set USB Power ON
- [ 632.480000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 632.490000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 632.500000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
- [ 632.520000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 632.520000] ehci_irq: port change detect
- [ 632.530000] hub 4-0:1.0: USB hub found
- [ 632.530000] hub 4-0:1.0: 1 port detected
- [ 632.530000] [sw-ohci2]: sw_usb_enable_ohci
- [ 632.540000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 632.550000] [sw-ohci2]: open clock
- [ 632.570000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 632.580000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- [ 632.590000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
- [ 632.650000] hub 5-0:1.0: USB hub found
- [ 632.660000] hub 5-0:1.0: 1 port detected
- [ 632.660000] rtw driver version=v3.4.1_3418.20120217
- [ 632.670000] Build at: Mar 23 2012 08:09:43
- [ 632.670000] ##########rtw_suspend_lock_init ###########
- [ 632.680000] usbcore: registered new interface driver rtl8192cu
- [ 632.850000] usb 4-1: new high speed USB device number 2 using sw-ehci
- [ 633.000000] register rtw_netdev_ops to netdev_ops
- [ 633.000000] rtw_wdev_alloc
- [ 633.020000] CHIP TYPE: RTL8188C_8192C
- [ 633.020000]
- [ 633.020000] usb_endpoint_descriptor(0):
- [ 633.030000] bLength=7
- [ 633.030000] bDescriptorType=5
- [ 633.030000] bEndpointAddress=81
- [ 633.040000] wMaxPacketSize=200
- [ 633.040000] bInterval=0
- [ 633.040000] RT_usb_endpoint_is_bulk_in = 1
- [ 633.050000]
- [ 633.050000] usb_endpoint_descriptor(1):
- [ 633.050000] bLength=7
- [ 633.050000] bDescriptorType=5
- [ 633.060000] bEndpointAddress=2
- [ 633.060000] wMaxPacketSize=200
- [ 633.060000] bInterval=0
- [ 633.070000] RT_usb_endpoint_is_bulk_out = 2
- [ 633.070000]
- [ 633.070000] usb_endpoint_descriptor(2):
- [ 633.080000] bLength=7
- [ 633.080000] bDescriptorType=5
- [ 633.080000] bEndpointAddress=3
- [ 633.080000] wMaxPacketSize=200
- [ 633.090000] bInterval=0
- [ 633.090000] RT_usb_endpoint_is_bulk_out = 3
- [ 633.090000]
- [ 633.090000] usb_endpoint_descriptor(3):
- [ 633.100000] bLength=7
- [ 633.100000] bDescriptorType=5
- [ 633.100000] bEndpointAddress=84
- [ 633.110000] wMaxPacketSize=40
- [ 633.110000] bInterval=1
- [ 633.110000] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 633.120000] nr_endpoint=4, in_num=2, out_num=2
- [ 633.120000]
- [ 633.120000] USB_SPEED_HIGH
- [ 633.130000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
- [ 633.130000] RF_Type is 3!!
- [ 633.140000] EEPROM type is E-FUSE
- [ 633.140000] ====> ReadAdapterInfo8192C
- [ 633.140000] Boot from EFUSE, Autoload OK !
- [ 633.280000] EEPROMVID = 0x0bda
- [ 633.280000] EEPROMPID = 0x8176
- [ 633.290000] EEPROMCustomerID : 0x00
- [ 633.290000] EEPROMSubCustomerID: 0x00
- [ 633.300000] RT_CustomerID: 0x00
- [ 633.300000] _ReadMACAddress MAC Address from EFUSE = 00:f2:4c:06:e2:fc
- [ 633.310000] EEPROMRegulatory = 0x0
- [ 633.310000] _ReadBoardType(0)
- [ 633.310000] BT Coexistance = disable
- [ 633.310000] RT_ChannelPlan: 0x0a
- [ 633.320000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
- [ 633.330000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 633.330000] ### AntDivCfg(0)
- [ 633.340000] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 633.340000] <==== ReadAdapterInfo8192C in 200 ms
- [ 633.350000] rtw_register_early_suspend
- [ 633.350000]
- [ 633.350000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
- [ 633.360000]
- [ 633.360000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
- [ 633.360000] rtw_macaddr_cfg MAC Address = 00:f2:4c:06:e2:fc
- [ 633.370000] MAC Address from pnetdev->dev_addr= 00:f2:4c:06:e2:fc
- [ 633.380000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 633.500000] init: starting 'wpa_supplicant'
- [ 633.500000] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
- [ 633.520000] +871x_drv - drv_open, bup=0
- [ 633.530000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 633.540000] FirmwareDownload92C accquire FW from embedded image
- [ 633.540000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 633.580000] fw download ok!
- [ 633.580000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 633.970000] IQK:Start!!!
- [ 633.990000] Path A Rx IQK fail!!
- [ 633.990000] Path A Rx IQK fail!!
- [ 633.990000] Path A IQK Only Tx Success!!
- [ 634.010000] Path A Rx IQK fail!!
- [ 634.010000] Path A Rx IQK fail!!
- [ 634.010000] Path A IQK Only Tx Success!!
- [ 634.020000] IQK: final_candidate is 0
- [ 634.030000] IQK: RegE94=103 RegE9C=c RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 634.030000] Path A IQ Calibration Success !
- [ 634.040000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 634.160000] pdmpriv->TxPowerTrackControl = 1
- [ 634.170000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 634.170000] rtl8192cu_hal_init in 640ms
- [ 634.180000] MAC Address = 00:f2:4c:06:e2:fc
- [ 634.190000] rtw_cfg80211_init_wiphy:rf_type=3
- [ 634.190000] -871x_drv - drv_open, bup=1
- [ 634.190000] cfg80211_rtw_set_power_mgmt
- [ 634.200000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 634.210000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 634.210000] set_mode = IW_MODE_INFRA
- [ 634.220000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 635.030000] init: waitpid returned pid 1066, status = 00000000
- [ 635.040000] init: untracked pid 1066 exited
- [ 635.570000] survey done event(5)
- [ 635.570000] rtw_cfg80211_indicate_scan_done without scan req
- [ 636.250000] ==>pwr_state_check_handler .fw_state(8)
- [ 636.250000] ==> rtw_ps_cmd , enqueue CMD
- [ 636.250000] ==>rtw_ps_processor .fw_state(8)
- [ 636.260000] ==>ips_enter cnts:1
- [ 636.260000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020800)....
- [ 636.260000]
- [ 636.270000] ===> rtw_ips_pwr_down...................
- [ 636.280000] ====> rtw_ips_dev_unload...
- [ 636.300000] usb_read_port_cancel
- [ 636.310000] usb_write_port_cancel
- [ 636.310000] ==> rtl8192cu_hal_deinit
- [ 636.320000] bkeepfwalive(0)
- [ 636.320000] card disble without HWSM...........
- [ 636.330000] <=== rtw_ips_pwr_down..................... in 60ms
- [ 643.580000] battery vol change: 50->49
- [ 644.300000]
- [ 644.300000] rfpwrstate_check call ips_leave....
- [ 644.300000] ==>ips_leave cnts:1
- [ 644.300000] ===> rtw_ips_pwr_up..............
- [ 644.310000] ===> ips_netdrv_open.........
- [ 644.320000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 644.330000] FirmwareDownload92C accquire FW from embedded image
- [ 644.330000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 644.370000] fw download ok!
- [ 644.380000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 644.780000] IQK:Start!!!
- [ 644.800000] Path A Rx IQK fail!!
- [ 644.800000] Path A Rx IQK fail!!
- [ 644.810000] Path A IQK Only Tx Success!!
- [ 644.820000] Path A Rx IQK fail!!
- [ 644.820000] Path A Rx IQK fail!!
- [ 644.830000] Path A IQK Only Tx Success!!
- [ 644.840000] IQK: final_candidate is 0
- [ 644.840000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 644.840000] Path A IQ Calibration Success !
- [ 644.850000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 644.970000] pdmpriv->TxPowerTrackControl = 1
- [ 644.980000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 644.990000] rtl8192cu_hal_init in 670ms
- [ 644.990000] <=== rtw_ips_pwr_up.............. in 690ms
- [ 645.000000] ==> ips_leave.....LED(0x00028080)...
- [ 646.330000] survey done event(5)
- [ 646.330000] rtw_cfg80211_indicate_scan_done without scan req
- [ 646.990000] ==>pwr_state_check_handler .fw_state(8)
- [ 646.990000] ==> rtw_ps_cmd , enqueue CMD
- [ 646.990000] ==>rtw_ps_processor .fw_state(8)
- [ 647.000000] ==>ips_enter cnts:2
- [ 647.000000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000)....
- [ 647.000000]
- [ 647.010000] ===> rtw_ips_pwr_down...................
- [ 647.020000] ====> rtw_ips_dev_unload...
- [ 647.060000] usb_read_port_cancel
- [ 647.060000] usb_write_port_cancel
- [ 647.070000] ==> rtl8192cu_hal_deinit
- [ 647.070000] bkeepfwalive(0)
- [ 647.070000] card disble without HWSM...........
- [ 647.090000] <=== rtw_ips_pwr_down..................... in 80ms
- [ 654.300000]
- [ 654.300000] rfpwrstate_check call ips_leave....
- [ 654.300000] ==>ips_leave cnts:2
- [ 654.310000] ===> rtw_ips_pwr_up..............
- [ 654.310000] ===> ips_netdrv_open.........
- [ 654.320000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 654.330000] FirmwareDownload92C accquire FW from embedded image
- [ 654.330000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 654.360000] fw download ok!
- [ 654.370000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 654.760000] IQK:Start!!!
- [ 654.780000] Path A Rx IQK fail!!
- [ 654.780000] Path A Rx IQK fail!!
- [ 654.780000] Path A IQK Only Tx Success!!
- [ 654.800000] Path A Rx IQK fail!!
- [ 654.800000] Path A Rx IQK fail!!
- [ 654.800000] Path A IQK Only Tx Success!!
- [ 654.820000] IQK: final_candidate is 0
- [ 654.820000] IQK: RegE94=103 RegE9C=d RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 654.820000] Path A IQ Calibration Success !
- [ 654.840000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 654.960000] pdmpriv->TxPowerTrackControl = 1
- [ 654.970000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 654.970000] rtl8192cu_hal_init in 660ms
- [ 654.980000] <=== rtw_ips_pwr_up.............. in 670ms
- [ 654.980000] ==> ips_leave.....LED(0x00028080)...
- [ 656.300000] survey done event(7)
- [ 656.300000] rtw_cfg80211_indicate_scan_done without scan req
- [ 656.980000] ==>pwr_state_check_handler .fw_state(8)
- [ 656.980000] ==> rtw_ps_cmd , enqueue CMD
- [ 656.980000] ==>rtw_ps_processor .fw_state(8)
- [ 656.990000] ==>ips_enter cnts:3
- [ 657.000000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000)....
- [ 657.000000]
- [ 657.010000] ===> rtw_ips_pwr_down...................
- [ 657.020000] ====> rtw_ips_dev_unload...
- [ 657.090000] usb_read_port_cancel
- [ 657.090000] usb_write_port_cancel
- [ 657.100000] ==> rtl8192cu_hal_deinit
- [ 657.100000] bkeepfwalive(0)
- [ 657.100000] card disble without HWSM...........
- [ 657.110000] <=== rtw_ips_pwr_down..................... in 100ms
- [ 664.310000]
- [ 664.310000] rfpwrstate_check call ips_leave....
- [ 664.310000] ==>ips_leave cnts:3
- [ 664.320000] ===> rtw_ips_pwr_up..............
- [ 664.330000] ===> ips_netdrv_open.........
- [ 664.350000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 664.360000] FirmwareDownload92C accquire FW from embedded image
- [ 664.360000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 664.410000] fw download ok!
- [ 664.420000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 664.870000] IQK:Start!!!
- [ 664.890000] Path A Rx IQK fail!!
- [ 664.890000] Path A Rx IQK fail!!
- [ 664.890000] Path A IQK Only Tx Success!!
- [ 664.910000] Path A IQK Success!!
- [ 664.920000] Path A Rx IQK fail!!
- [ 664.930000] Path A Rx IQK fail!!
- [ 664.930000] Path A IQK Only Tx Success!!
- [ 664.940000] IQK: final_candidate is 0
- [ 664.940000] IQK: RegE94=103 RegE9C=c RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 664.940000] Path A IQ Calibration Success !
- [ 664.960000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 665.080000] pdmpriv->TxPowerTrackControl = 1
- [ 665.090000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 665.100000] rtl8192cu_hal_init in 760ms
- [ 665.120000] <=== rtw_ips_pwr_up.............. in 800ms
- [ 665.120000] ==> ips_leave.....LED(0x00028080)...
- [ 666.450000] survey done event(9)
- [ 666.450000] rtw_cfg80211_indicate_scan_done without scan req
- [ 667.120000] ==>pwr_state_check_handler .fw_state(8)
- [ 667.120000] ==> rtw_ps_cmd , enqueue CMD
- [ 667.120000] ==>rtw_ps_processor .fw_state(8)
- [ 667.130000] ==>ips_enter cnts:4
- [ 667.130000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00028000)....
- [ 667.130000]
- [ 667.140000] ===> rtw_ips_pwr_down...................
- [ 667.150000] ====> rtw_ips_dev_unload...
- [ 667.190000] usb_read_port_cancel
- [ 667.200000] usb_write_port_cancel
- [ 667.200000] ==> rtl8192cu_hal_deinit
- [ 667.210000] bkeepfwalive(0)
- [ 667.210000] card disble without HWSM...........
- [ 667.230000] <=== rtw_ips_pwr_down..................... in 90ms
- [ 672.990000]
- [ 672.990000] rfpwrstate_check call ips_leave....
- [ 673.020000] ==>ips_leave cnts:4
- [ 673.020000] ===> rtw_ips_pwr_up..............
- [ 673.020000] ===> ips_netdrv_open.........
- [ 673.040000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 673.060000] FirmwareDownload92C accquire FW from embedded image
- [ 673.070000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 673.110000] fw download ok!
- [ 673.110000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 673.510000] IQK:Start!!!
- [ 673.530000] Path A Rx IQK fail!!
- [ 673.530000] Path A Rx IQK fail!!
- [ 673.530000] Path A IQK Only Tx Success!!
- [ 673.550000] Path A IQK Success!!
- [ 673.560000] Path A Rx IQK fail!!
- [ 673.570000] Path A IQK Success!!
- [ 673.580000] IQK: final_candidate is 1
- [ 673.580000] IQK: RegE94=103 RegE9C=c RegEA4=ff RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 673.580000] Path A IQ Calibration Success !
- [ 673.710000] pdmpriv->TxPowerTrackControl = 1
- [ 673.720000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 673.720000] rtl8192cu_hal_init in 680ms
- [ 673.730000] <=== rtw_ips_pwr_up.............. in 710ms
- [ 673.730000] ==> ips_leave.....LED(0x00028080)...
- [ 675.080000] survey done event(8)
- [ 675.080000] rtw_cfg80211_indicate_scan_done without scan req
- [ 675.090000] =>rtw_wx_set_essid
- [ 675.090000] <=rtw_wx_set_essid, ret 0
- [ 675.100000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 675.110000] set_mode = IW_MODE_INFRA
- [ 675.110000]
- [ 675.110000] wpa_ie(length:22):
- [ 675.120000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 675.120000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 675.130000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x2a 0xe6
- [ 675.130000] Set BSSID under fw_state=0x00000008
- [ 675.140000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-68
- [ 675.150000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 675.150000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 675.160000] link to Artheros AP
- [ 675.160000] =>rtw_wx_set_essid
- [ 675.170000] set ch/bw before connected
- [ 675.170000] ssid=lll, len=3
- [ 675.170000] Set SSID under fw_state=0x00000088
- [ 675.180000] <=rtw_wx_set_essid, ret 0
- [ 675.270000] link to Artheros AP
- [ 675.270000] issue_deauth
- [ 675.290000] OnAuthClient
- [ 675.290000] network.SupportedRates[0]=82
- [ 675.290000] network.SupportedRates[1]=84
- [ 675.300000] network.SupportedRates[2]=8B
- [ 675.300000] network.SupportedRates[3]=96
- [ 675.310000] network.SupportedRates[4]=0C
- [ 675.310000] network.SupportedRates[5]=12
- [ 675.310000] network.SupportedRates[6]=18
- [ 675.320000] network.SupportedRates[7]=24
- [ 675.320000] network.SupportedRates[8]=30
- [ 675.330000] network.SupportedRates[9]=48
- [ 675.330000] network.SupportedRates[10]=60
- [ 675.330000] network.SupportedRates[11]=6C
- [ 675.340000] bssrate_len = 12
- [ 675.350000] OnAssocRsp
- [ 675.350000] report_join_res(3)
- [ 675.350000] rtw_joinbss_update_network
- [ 675.360000] +rtw_update_ht_cap()
- [ 675.360000] rtw_joinbss_update_stainfo
- [ 675.360000] rtw_cfg80211_indicate_connect
- [ 675.370000] OnAction_back
- [ 675.370000] OnAction_back, action=0
- [ 675.370000] issue_action_BA, category=3, action=1, status=0
- [ 675.380000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 675.390000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 675.400000] WMM(0): 0, a42b
- [ 675.400000] WMM(1): 0, a44f
- [ 675.410000] WMM(2): 0, 5e4322
- [ 675.410000] WMM(3): 0, 2f3222
- [ 675.410000]
- [ 675.410000] ~~~~stastakey:unicastkey
- [ 675.420000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 675.420000] HTOnAssocRsp
- [ 675.440000]
- [ 675.440000] ~~~~stastakey:groupkey
- [ 675.460000] ==> rtw_set_key algorithm(4),keyid(2),key_mask(4)
- [ 675.480000] update raid entry, mask=0xfffff, arg=0xa0
- [ 675.490000] init: starting 'dhcpcd_wlan0'
- [ 675.500000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 675.500000] SetFwRsvdPagePkt
- [ 675.520000] Set RSVD page location to Fw.
- [ 675.530000] =>mlmeext_joinbss_event_callback
- [ 677.300000] survey done event(6)
- [ 677.320000] rtw_cfg80211_indicate_scan_done without scan req
- [ 678.740000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 681.660000] rtw_cfg80211_indicate_disconnect
- [ 681.660000] pwdev->sme_state=0
- [ 681.670000] issue_deauth
- [ 681.670000] init: service 'dhcpcd_wlan0' is being killed
- [ 681.690000] init: waitpid returned pid 1105, status = 00000009
- [ 681.700000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 681.710000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
- [ 681.710000] call rtw_indicate_scan_done when drv_close
- [ 681.730000] init: process 'dhcpcd_wlan0', pid 1105 exited
- [ 681.730000] rtw_cfg80211_indicate_scan_done without scan req
- [ 681.760000] -871x_drv - drv_close, bup=1
- [ 681.790000] init: service 'wpa_supplicant' is being killed
- [ 681.800000] wpa_supplicant used greatest stack depth: 4648 bytes left
- [ 681.800000] init: waitpid returned pid 1068, status = 00000009
- [ 681.820000] init: process 'wpa_supplicant', pid 1068 exited
- [ 682.120000] +rtw_drv_halt
- [ 682.120000] ##########rtw_suspend_lock_uninit###########
- [ 682.140000] usbcore: deregistering interface driver rtl8192cu
- [ 682.140000] ###=> usb_read_port_complete => urb status(-108)
- [ 682.150000] +rtw_dev_remove
- [ 682.150000] rtw_unregister_early_suspend
- [ 682.150000] rtw_sta_flush
- [ 682.190000] ===> rtw_dev_unload
- [ 682.190000] usb_read_port_cancel
- [ 682.190000] usb_write_port_cancel
- [ 682.210000] ###> rtw_cmd_thread break.................
- [ 682.210000] rtw_cmd_thread: leaving... check & free all cmd_obj resources
- [ 682.230000] rtw_cmd_thread: leaving... call up terminate_cmdthread_sema
- [ 682.230000] ==> rtl8192cu_hal_deinit
- [ 682.240000] bkeepfwalive(0)
- [ 682.240000] card disble HWSM...........
- [ 682.250000] <=== rtw_dev_unload
- [ 682.250000] +r871xu_dev_remove, hw_init_completed=0
- [ 682.250000] free_recv_skb_queue not empty, 4
- [ 682.270000] rtw_unregister_early_suspend
- [ 682.290000] =====> rtl8192c_free_hal_data =====
- [ 682.290000] <===== rtl8192c_free_hal_data =====
- [ 682.290000] rtw_wdev_free
- [ 682.300000] rtw_wdev_free, scan abort when device remove
- [ 682.310000] rtw_cfg80211_indicate_scan_done without scan req
- [ 682.320000] usb attached..., try to reset usb device
- [ 682.440000] usb 4-1: reset high speed USB device number 2 using sw-ehci
- [ 682.590000] -r871xu_dev_remove, done
- [ 682.590000] -rtw_drv_halt
- [ 682.590000] sw_usb_disable_hcd: usbc_num = 2
- [ 682.600000] [sw-ehci2]: sw_usb_disable_ehci
- [ 682.600000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 682.610000] sw-ehci sw-ehci.2: remove, state 1
- [ 682.610000] usb usb4: USB disconnect, device number 1
- [ 682.620000] usb 4-1: USB disconnect, device number 2
- [ 682.630000] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 682.640000] [sw-ehci2]: close clock
- [ 682.640000] [sw-ohci2]: sw_usb_disable_ohci
- [ 682.640000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 682.650000] sw-ohci sw-ohci.2: remove, state 1
- [ 682.660000] usb usb5: USB disconnect, device number 1
- [ 682.680000] hub 5-0:1.0: hub_port_status failed (err = -19)
- [ 682.680000] hub 5-0:1.0: connect-debounce failed, port 1 disabled
- [ 682.690000] sw-ohci sw-ohci.2: USB bus 5 deregistered
- [ 682.690000] [sw-ohci2]: Set USB Power OFF
- [ 682.700000] [sw-ohci2]: close clock
- [ 923.150000] sw_usb_enable_hcd: usbc_num = 2
- [ 923.150000] [sw-ehci2]: sw_usb_enable_ehci
- [ 923.160000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 923.170000] [sw-ehci2]: open clock
- [ 923.190000] [sw-ehci2]: Set USB Power ON
- [ 923.190000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 923.200000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
- [ 923.210000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
- [ 923.230000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
- [ 923.230000] ehci_irq: port change detect
- [ 923.240000] hub 4-0:1.0: USB hub found
- [ 923.240000] hub 4-0:1.0: 1 port detected
- [ 923.250000] [sw-ohci2]: sw_usb_enable_ohci
- [ 923.250000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 923.260000] [sw-ohci2]: open clock
- [ 923.290000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 923.300000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
- [ 923.300000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
- [ 923.370000] hub 5-0:1.0: USB hub found
- [ 923.370000] hub 5-0:1.0: 1 port detected
- [ 923.380000] rtw driver version=v3.4.1_3418.20120217
- [ 923.390000] Build at: Mar 23 2012 08:09:43
- [ 923.390000] ##########rtw_suspend_lock_init ###########
- [ 923.400000] usbcore: registered new interface driver rtl8192cu
- [ 923.570000] usb 4-1: new high speed USB device number 2 using sw-ehci
- [ 923.720000] register rtw_netdev_ops to netdev_ops
- [ 923.720000] rtw_wdev_alloc
- [ 923.740000] CHIP TYPE: RTL8188C_8192C
- [ 923.740000]
- [ 923.740000] usb_endpoint_descriptor(0):
- [ 923.750000] bLength=7
- [ 923.750000] bDescriptorType=5
- [ 923.760000] bEndpointAddress=81
- [ 923.760000] wMaxPacketSize=200
- [ 923.760000] bInterval=0
- [ 923.770000] RT_usb_endpoint_is_bulk_in = 1
- [ 923.770000]
- [ 923.770000] usb_endpoint_descriptor(1):
- [ 923.780000] bLength=7
- [ 923.780000] bDescriptorType=5
- [ 923.780000] bEndpointAddress=2
- [ 923.780000] wMaxPacketSize=200
- [ 923.790000] bInterval=0
- [ 923.790000] RT_usb_endpoint_is_bulk_out = 2
- [ 923.790000]
- [ 923.790000] usb_endpoint_descriptor(2):
- [ 923.800000] bLength=7
- [ 923.800000] bDescriptorType=5
- [ 923.810000] bEndpointAddress=3
- [ 923.810000] wMaxPacketSize=200
- [ 923.810000] bInterval=0
- [ 923.820000] RT_usb_endpoint_is_bulk_out = 3
- [ 923.820000]
- [ 923.820000] usb_endpoint_descriptor(3):
- [ 923.830000] bLength=7
- [ 923.830000] bDescriptorType=5
- [ 923.830000] bEndpointAddress=84
- [ 923.840000] wMaxPacketSize=40
- [ 923.840000] bInterval=1
- [ 923.840000] RT_usb_endpoint_is_int_in = 4, Interval = 1
- [ 923.850000] nr_endpoint=4, in_num=2, out_num=2
- [ 923.850000]
- [ 923.850000] USB_SPEED_HIGH
- [ 923.860000] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
- [ 923.860000] RF_Type is 3!!
- [ 923.870000] EEPROM type is E-FUSE
- [ 923.870000] ====> ReadAdapterInfo8192C
- [ 923.880000] Boot from EFUSE, Autoload OK !
- [ 924.030000] EEPROMVID = 0x0bda
- [ 924.030000] EEPROMPID = 0x8176
- [ 924.040000] EEPROMCustomerID : 0x00
- [ 924.040000] EEPROMSubCustomerID: 0x00
- [ 924.040000] RT_CustomerID: 0x00
- [ 924.050000] _ReadMACAddress MAC Address from EFUSE = 00:f2:4c:06:e2:fc
- [ 924.050000] EEPROMRegulatory = 0x0
- [ 924.060000] _ReadBoardType(0)
- [ 924.060000] BT Coexistance = disable
- [ 924.060000] RT_ChannelPlan: 0x0a
- [ 924.070000] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
- [ 924.080000] ### PS params=> power_mgnt(1),usbss_enable(0) ###
- [ 924.080000] ### AntDivCfg(0)
- [ 924.090000] readAdapterInfo_8192CU(): REPLACEMENT = 1
- [ 924.090000] <==== ReadAdapterInfo8192C in 220 ms
- [ 924.100000] rtw_register_early_suspend
- [ 924.100000]
- [ 924.100000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
- [ 924.110000]
- [ 924.110000] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
- [ 924.120000] rtw_macaddr_cfg MAC Address = 00:f2:4c:06:e2:fc
- [ 924.130000] MAC Address from pnetdev->dev_addr= 00:f2:4c:06:e2:fc
- [ 924.140000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
- [ 924.150000] battery vol change: 49->48
- [ 924.220000] init: starting 'wpa_supplicant'
- [ 924.230000] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
- [ 924.340000] +871x_drv - drv_open, bup=0
- [ 924.350000] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
- [ 924.360000] FirmwareDownload92C accquire FW from embedded image
- [ 924.360000] fw_ver=v79, fw_subver=0, sig=0x88c0
- [ 924.400000] fw download ok!
- [ 924.400000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
- [ 924.800000] IQK:Start!!!
- [ 924.820000] Path A Rx IQK fail!!
- [ 924.820000] Path A IQK Success!!
- [ 924.840000] Path A IQK Success!!
- [ 924.850000] Path A Rx IQK fail!!
- [ 924.860000] Path A Rx IQK fail!!
- [ 924.860000] Path A IQK Only Tx Success!!
- [ 924.870000] IQK: final_candidate is 3
- [ 924.870000] IQK: RegE94=103 RegE9C=c RegEA4=0 RegEAC=0 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
- [ 924.870000] Path A IQ Calibration Success !
- [ 924.890000] _PHY_PathAFillIQKMatrix only Tx OK
- [ 925.010000] pdmpriv->TxPowerTrackControl = 1
- [ 925.020000] MAC Address from REG_MACID = 00:f2:4c:06:e2:fc
- [ 925.030000] rtl8192cu_hal_init in 690ms
- [ 925.030000] MAC Address = 00:f2:4c:06:e2:fc
- [ 925.040000] rtw_cfg80211_init_wiphy:rf_type=3
- [ 925.040000] -871x_drv - drv_open, bup=1
- [ 925.060000] cfg80211_rtw_set_power_mgmt
- [ 925.070000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 925.080000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 925.090000] set_mode = IW_MODE_INFRA
- [ 925.100000] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
- [ 925.750000] init: waitpid returned pid 1385, status = 00000000
- [ 925.760000] init: untracked pid 1385 exited
- [ 926.470000] survey done event(7)
- [ 926.470000] rtw_cfg80211_indicate_scan_done without scan req
- [ 926.480000] =>rtw_wx_set_essid
- [ 926.480000] <=rtw_wx_set_essid, ret 0
- [ 926.490000] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
- [ 926.500000] set_mode = IW_MODE_INFRA
- [ 926.500000]
- [ 926.500000] wpa_ie(length:22):
- [ 926.510000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
- [ 926.510000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
- [ 926.520000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x77 0xe6
- [ 926.530000] Set BSSID under fw_state=0x00000008
- [ 926.530000] [by_bssid:1][assoc_ssid:][to_roaming:0] new candidate: lll(14:d6:4d:37:ae:40) rssi:-70
- [ 926.540000] rtw_select_and_join_from_scanned_queue: candidate: lll(14:d6:4d:37:ae:40)
- [ 926.550000] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
- [ 926.550000] link to Artheros AP
- [ 926.560000] set ch/bw before connected
- [ 926.560000] =>rtw_wx_set_essid
- [ 926.560000] ssid=lll, len=3
- [ 926.570000] Set SSID under fw_state=0x00000088
- [ 926.570000] <=rtw_wx_set_essid, ret 0
- [ 926.690000] link to Artheros AP
- [ 926.690000] issue_deauth
- [ 926.700000] OnAuthClient
- [ 926.700000] network.SupportedRates[0]=82
- [ 926.700000] network.SupportedRates[1]=84
- [ 926.700000] network.SupportedRates[2]=8B
- [ 926.720000] network.SupportedRates[3]=96
- [ 926.720000] network.SupportedRates[4]=0C
- [ 926.720000] network.SupportedRates[5]=12
- [ 926.730000] network.SupportedRates[6]=18
- [ 926.730000] network.SupportedRates[7]=24
- [ 926.740000] network.SupportedRates[8]=30
- [ 926.740000] network.SupportedRates[9]=48
- [ 926.740000] network.SupportedRates[10]=60
- [ 926.750000] network.SupportedRates[11]=6C
- [ 926.750000] bssrate_len = 12
- [ 926.760000] OnAssocRsp
- [ 926.770000] report_join_res(3)
- [ 926.770000] rtw_joinbss_update_network
- [ 926.770000] +rtw_update_ht_cap()
- [ 926.780000] rtw_joinbss_update_stainfo
- [ 926.780000] rtw_cfg80211_indicate_connect
- [ 926.780000] OnAction_back
- [ 926.790000] OnAction_back, action=0
- [ 926.790000] issue_action_BA, category=3, action=1, status=0
- [ 926.800000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 926.800000] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
- [ 926.820000] WMM(0): 0, a42b
- [ 926.820000] WMM(1): 0, a44f
- [ 926.820000] WMM(2): 0, 5e4322
- [ 926.830000] WMM(3): 0, 2f3222
- [ 926.830000] [HW_VAR_ACM_CTRL] Write 0x0
- [ 926.830000] HTOnAssocRsp
- [ 926.840000] update raid entry, mask=0xfffff, arg=0xa0
- [ 926.850000] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
- [ 926.860000] SetFwRsvdPagePkt
- [ 926.860000] Set RSVD page location to Fw.
- [ 926.860000] =>mlmeext_joinbss_event_callback
- [ 927.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 927.780000]
- [ 927.780000] ~~~~stastakey:unicastkey
- [ 927.790000]
- [ 927.790000] ~~~~stastakey:groupkey
- [ 927.790000] ==> rtw_set_key algorithm(4),keyid(2),key_mask(4)
- [ 927.820000] init: starting 'dhcpcd_wlan0'
- [ 931.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 931.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 931.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 932.290000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 932.300000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 933.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 935.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 935.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 935.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 935.510000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 935.510000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 937.170000] wlan0: no IPv6 routers present
- [ 941.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 941.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 965.670000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 965.700000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 967.090000] survey done event(2)
- [ 967.110000] rtw_cfg80211_indicate_scan_done without scan req
- [ 969.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 969.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1107.570000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1109.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1109.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1111.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1119.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1119.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1119.070000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1141.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1141.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1143.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1145.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1145.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1145.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1189.560000]
- [ 1189.560000] ~~~~stastakey:groupkey
- [ 1189.560000] ==> rtw_set_key algorithm(4),keyid(1),key_mask(6)
- [ 1189.570000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1189.580000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1191.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1191.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1197.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1197.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1199.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1201.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1201.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1201.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1268.430000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1269.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1269.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1271.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1275.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1275.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1275.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1279.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1279.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1281.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1281.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1281.640000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1283.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1283.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1285.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1293.450000] rtw_issue_addbareq_cmd, p=0
- [ 1293.460000] issue_action_BA, category=3, action=0, status=0
- [ 1293.460000] BA_starting_seqctrl = 547 for TID=0
- [ 1293.480000] OnAction_back
- [ 1293.480000] OnAction_back, action=1
- [ 1293.490000] agg_enable for TID=0
- [ 1297.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1297.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1297.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1299.460000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1301.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1301.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1301.060000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1307.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1307.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1307.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1309.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1309.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1309.100000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1311.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1315.670000] qtaguid: ctrl_tag(t -1 281479271677952 -1): failed to lookup sock_fd=-1 err=-9
- [ 1321.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1321.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1321.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1323.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1323.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1325.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1327.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1327.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1327.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1329.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1329.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1329.060000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1331.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1331.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1331.060000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1335.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1335.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1337.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1337.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1339.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1339.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1341.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1353.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1353.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1353.050000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1355.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1355.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1357.040000] rtl8192c_dm_RF_Saving(): RF_Save
- [ 1359.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1359.040000] rtl8192c_dm_RF_Saving(): RF_Normal
- [ 1359.060000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1363.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1363.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1365.040000] rtw_set_ps_mode(): Enter 802.11 power save mode...
- [ 1365.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
- [ 1369.040000] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
- [ 1369.040000] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
- [ 1370.540000] rtw_cfg80211_indicate_disconnect
- [ 1370.540000] pwdev->sme_state=0
- [ 1370.550000] issue_deauth
- [ 1370.550000] init: service 'dhcpcd_wlan0' is being killed
- [ 1370.560000] ==>pwr_state_check_handler .fw_state(8)
- [ 1370.560000] ==> rtw_ps_cmd , enqueue CMD
- [ 1370.590000] init: waitpid returned pid 1393, status = 00000009
- [ 1370.600000] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
- [ 1370.600000] ==>rtw_ps_processor .fw_state(8)
- [ 1370.670000] ==>ips_enter cnts:1
- [ 1370.670000] ==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x00020008)....
- [ 1370.670000]
- [ 1370.720000] init: process 'dhcpcd_wlan0', pid 1393 exited
- [ 1370.730000] ===> rtw_ips_pwr_down...................
- [ 1370.790000] ====> rtw_ips_dev_unload...
- [ 1370.820000] (2)871x_drv - drv_close, bup=1, hw_init_completed=1
- [ 1370.840000] call rtw_indicate_scan_done when drv_close
- [ 1370.840000] rtw_cfg80211_indicate_scan_done without scan req
- [ 1370.860000] usb_read_port_cancel
- [ 1370.870000] -871x_drv - drv_close, bup=1
- [ 1370.890000] usb_write_port_cancel
- [ 1370.890000] ==> rtl8192cu_hal_deinit
- [ 1370.900000] init: service 'wpa_supplicant' is being killed
- [ 1370.900000] init: waitpid returned pid 1387, status = 00000009
- [ 1370.910000] init: process 'wpa_supplicant', pid 1387 exited
- [ 1370.940000] bkeepfwalive(0)
- [ 1370.940000] card disble without HWSM...........
- [ 1370.950000] <=== rtw_ips_pwr_down..................... in 220ms
- [ 1371.210000] +rtw_drv_halt
- [ 1371.210000] ##########rtw_suspend_lock_uninit###########
- [ 1371.210000] usbcore: deregistering interface driver rtl8192cu
- [ 1371.220000] +rtw_dev_remove
- [ 1371.220000] rtw_unregister_early_suspend
- [ 1371.230000] rtw_sta_flush
- [ 1371.240000] ===> rtw_dev_unload
- [ 1371.240000] usb_read_port_cancel
- [ 1371.240000] usb_write_port_cancel
- [ 1371.250000] ###> rtw_cmd_thread break.................
- [ 1371.250000] rtw_cmd_thread: leaving... check & free all cmd_obj resources
- [ 1371.260000] rtw_cmd_thread: leaving... call up terminate_cmdthread_sema
- [ 1371.270000] ==> rtl8192cu_hal_deinit
- [ 1371.270000] bkeepfwalive(0)
- [ 1371.270000] card disble HWSM...........
- [ 1371.280000] <=== rtw_dev_unload
- [ 1371.290000] +r871xu_dev_remove, hw_init_completed=0
- [ 1371.290000] free_recv_skb_queue not empty, 4
- [ 1371.300000] rtw_unregister_early_suspend
- [ 1371.300000] =====> rtl8192c_free_hal_data =====
- [ 1371.310000] <===== rtl8192c_free_hal_data =====
- [ 1371.310000] rtw_wdev_free
- [ 1371.320000] rtw_wdev_free, scan abort when device remove
- [ 1371.320000] rtw_cfg80211_indicate_scan_done without scan req
- [ 1371.330000] usb attached..., try to reset usb device
- [ 1371.460000] usb 4-1: reset high speed USB device number 2 using sw-ehci
- [ 1371.610000] -r871xu_dev_remove, done
- [ 1371.610000] -rtw_drv_halt
- [ 1371.610000] sw_usb_disable_hcd: usbc_num = 2
- [ 1371.620000] [sw-ehci2]: sw_usb_disable_ehci
- [ 1371.620000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc086d6e8
- [ 1371.630000] sw-ehci sw-ehci.2: remove, state 1
- [ 1371.640000] usb usb4: USB disconnect, device number 1
- [ 1371.640000] usb 4-1: USB disconnect, device number 2
- [ 1371.660000] sw-ehci sw-ehci.2: USB bus 4 deregistered
- [ 1371.660000] [sw-ehci2]: close clock
- [ 1371.670000] [sw-ohci2]: sw_usb_disable_ohci
- [ 1371.670000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc086d7f8
- [ 1371.680000] sw-ohci sw-ohci.2: remove, state 1
- [ 1371.690000] usb usb5: USB disconnect, device number 1
- [ 1371.700000] hub 5-0:1.0: hub_port_status failed (err = -19)
- [ 1371.700000] hub 5-0:1.0: connect-debounce failed, port 1 disabled
- [ 1371.710000] sw-ohci sw-ohci.2: USB bus 5 deregistered
- [ 1371.720000] [sw-ohci2]: Set USB Power OFF
- [ 1371.720000] [sw-ohci2]: close clock
- [ 1371.990000] [AXP]press short
- [ 1372.100000] [AXP]event = 0x20000
- [ 1372.400000] [pm]valid
- [ 1372.400000] request_suspend_state: sleep (0->3) at 1372402465407 (2012-04-24 18:52:27.349413593 UTC)
- [ 1372.410000] mma7660 early suspend
- [ 1372.410000] [AXP]======early suspend=======
- [ 1372.430000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 1372.450000] display early suspend: backlight_early_suspend
- [ 1373.470000] =======goodix_ts_early_suspend========
- [ 1373.470000] Goodix-TS 2-005d: Send suspend cmd
- [ 1394.010000] [AXP]battery state change
- [ 1394.020000] charger->usb_valid = 0
- [ 1394.020000] set usb vol-lim to 4000 mV, cur-lim to 0 mA
- [ 1394.030000] [AXP]event = 0x40
- [ 1394.480000] request_suspend_state: wakeup (3->0) at 1394481356636 (2012-04-24 18:52:49.428286697 UTC)
- [ 1394.490000] =======goodix_ts_late_resume========
- [ 1394.580000] display late resume enter: backlight_late_resume
- [ 1395.160000] display late resume done: backlight_late_resume
- [ 1395.160000] enter laterresume: sun4i_keyboard_resume.
- [ 1395.180000] [AXP]======late resume=======
- [ 1395.180000] mma7660 late resume
- [ 1395.670000] [AXP]battery state change
- [ 1395.670000] charger->usb_valid = 0
- [ 1395.680000] set usb vol-lim to 4000 mV, cur-lim to 0 mA
- [ 1395.700000] [AXP]event = 0x800
- [ 1398.390000] [AXP]press short
- [ 1398.500000] [AXP]event = 0x20000
- [ 1398.800000] [pm]valid
- [ 1398.800000] request_suspend_state: sleep (0->3) at 1398802424637 (2012-04-24 18:52:53.749372156 UTC)
- [ 1398.810000] mma7660 early suspend
- [ 1398.810000] [AXP]======early suspend=======
- [ 1398.830000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 1398.850000] display early suspend: backlight_early_suspend
- [ 1399.900000] =======goodix_ts_early_suspend========
- [ 1399.900000] Goodix-TS 2-005d: Send suspend cmd
- [ 1430.600000] [pm]valid
- [ 1430.600000] PM: Syncing filesystems ... done.
- [ 1430.610000] PM: Preparing system for mem sleep
- [ 1430.620000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 1430.690000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1430.710000] PM: Entering mem sleep
- [ 1430.710000] [pm]3 state begin
- [ 1430.720000] [CSI]csi_suspend
- [ 1430.720000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1430.730000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1430.740000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1430.740000] [audio codec]:suspend start5000
- [ 1431.410000] [audio codec]:suspend end
- [ 1431.410000] pmu_suspend_chgcur = 1000000
- [ 1431.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.430000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:52:45
- [ 1431.430000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.440000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:52:45
- [ 1431.440000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.450000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:52:45
- [ 1431.460000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.460000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:52:45
- [ 1431.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.470000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:52:45
- [ 1431.480000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1431.480000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1431.490000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1431.500000] [sw-ohci1]: close clock
- [ 1431.500000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1431.510000] [sw-ehci1]: Set USB Power OFF
- [ 1431.510000] [sw-ehci1]: close clock
- [ 1431.520000] [sw_hcd0]: sw_hcd_suspend start
- [ 1431.520000] wrn: hcd is disable, need not enter to suspend
- [ 1431.530000] [sw_udc]: sw_udc_suspend start
- [ 1431.530000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1431.540000] [i2c2] suspend okay..
- [ 1431.550000] [i2c1] suspend okay..
- [ 1431.550000] [NAND] nand_suspend
- [ 1431.550000] [NAND] nand_suspend ok
- [ 1431.560000] [sw_dmac_suspend] enter
- [ 1431.560000] PM: suspend of devices complete after 841.944 msecs
- [ 1431.570000] [pm]prepare
- [ 1431.570000] PM: late suspend of devices complete after 2.118 msecs
- [ 1431.580000] [pm]prepare_late
- [ 1431.580000] [pm]enter state 3
- [ 1431.580000] [pm]platform wakeup, wakesource is:0x10
- [ 1431.590000] PM: early resume of devices complete after 1.333 msecs
- [ 1431.600000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1431.610000] [pm]platform wakeup finish
- [ 1431.610000] [sw_dmac_resume] enter
- [ 1431.620000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:20
- [ 1431.620000] wakeup wake lock: alarm_rtc
- [ 1431.630000] [NAND] nand_resume
- [ 1431.630000] [NAND] nand gpio_request
- [ 1431.630000] twi1, apb clock = 24000000
- [ 1431.640000] [i2c1] resume okay..
- [ 1431.640000] twi2, apb clock = 24000000
- [ 1431.640000] [i2c2] resume okay..
- [ 1431.650000] [sw_udc]: sw_udc_resume start
- [ 1431.650000] [sw_udc]: udc is disable, need not enter to resume
- [ 1431.660000] [sw_hcd0]: sw_hcd_resume start
- [ 1431.660000] wrn: hcd is disable, need not resume
- [ 1431.690000] wemac wemac.0: resetting device
- [ 1431.690000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1431.700000] [sw-ehci1]: open clock
- [ 1431.720000] [sw-ehci1]: Set USB Power ON
- [ 1431.720000] [sw-ehci1]: lost power, restarting
- [ 1431.730000] usb usb2: root hub lost power or was reset
- [ 1431.880000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1431.880000] [sw-ohci1]: open clock
- [ 1431.960000] usb usb3: root hub lost power or was reset
- [ 1432.200000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1432.200000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1432.210000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1432.210000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:20
- [ 1432.220000] [AXP]=======================val = 0x0
- [ 1432.230000] pmu_resume_chgcur = 300000
- [ 1432.230000] [audio codec]:resume start
- [ 1432.230000] codec_resume_events,1271
- [ 1432.240000] [audio codec]:resume end
- [ 1432.240000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1432.250000] [mmc_pm]: No sdio card, please check your config !!
- [ 1432.250000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1432.260000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1432.360000] [CSI]csi_resume
- [ 1432.360000] PM: resume of devices complete after 746.062 msecs
- [ 1432.360000] [pm]aw_pm_end!
- [ 1432.370000] PM: Finishing wakeup.
- [ 1432.370000] Restarting tasks ... done.
- [ 1432.420000] suspend: exit suspend, ret = 0 (2012-04-24 18:54:01.644687339 UTC)
- [ 1432.900000] ====pa turn on===
- [ 1437.490000] [pm]valid
- [ 1437.490000] PM: Syncing filesystems ... done.
- [ 1437.490000] PM: Preparing system for mem sleep
- [ 1437.500000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1437.530000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1437.550000] PM: Entering mem sleep
- [ 1437.550000] [pm]3 state begin
- [ 1437.550000] [CSI]csi_suspend
- [ 1437.560000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1437.560000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1437.570000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1437.580000] [audio codec]:suspend start5000
- [ 1438.230000] [audio codec]:suspend end
- [ 1438.230000] pmu_suspend_chgcur = 1000000
- [ 1438.240000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.240000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:26
- [ 1438.250000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.250000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:26
- [ 1438.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.260000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:26
- [ 1438.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.270000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:26
- [ 1438.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.280000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:53:26
- [ 1438.290000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1438.300000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1438.300000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1438.310000] [sw-ohci1]: close clock
- [ 1438.310000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1438.320000] [sw-ehci1]: Set USB Power OFF
- [ 1438.320000] [sw-ehci1]: close clock
- [ 1438.320000] [sw_hcd0]: sw_hcd_suspend start
- [ 1438.330000] wrn: hcd is disable, need not enter to suspend
- [ 1438.330000] [sw_udc]: sw_udc_suspend start
- [ 1438.340000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1438.340000] [i2c2] suspend okay..
- [ 1438.350000] [i2c1] suspend okay..
- [ 1438.350000] [NAND] nand_suspend
- [ 1438.350000] [NAND] nand_suspend ok
- [ 1438.360000] [sw_dmac_suspend] enter
- [ 1438.360000] PM: suspend of devices complete after 806.410 msecs
- [ 1438.370000] [pm]prepare
- [ 1438.370000] PM: late suspend of devices complete after 0.255 msecs
- [ 1438.380000] [pm]prepare_late
- [ 1438.380000] [pm]enter state 3
- [ 1438.380000] [pm]platform wakeup, wakesource is:0x10
- [ 1438.380000] PM: early resume of devices complete after 0.158 msecs
- [ 1438.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.400000] [pm]platform wakeup finish
- [ 1438.400000] [sw_dmac_resume] enter
- [ 1438.400000] [NAND] nand_resume
- [ 1438.410000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:44
- [ 1438.410000] wakeup wake lock: alarm_rtc
- [ 1438.420000] [NAND] nand gpio_request
- [ 1438.420000] twi1, apb clock = 24000000
- [ 1438.420000] [i2c1] resume okay..
- [ 1438.430000] twi2, apb clock = 24000000
- [ 1438.430000] [i2c2] resume okay..
- [ 1438.430000] [sw_udc]: sw_udc_resume start
- [ 1438.440000] [sw_udc]: udc is disable, need not enter to resume
- [ 1438.440000] [sw_hcd0]: sw_hcd_resume start
- [ 1438.450000] wrn: hcd is disable, need not resume
- [ 1438.470000] wemac wemac.0: resetting device
- [ 1438.470000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1438.480000] [sw-ehci1]: open clock
- [ 1438.500000] [sw-ehci1]: Set USB Power ON
- [ 1438.500000] [sw-ehci1]: lost power, restarting
- [ 1438.510000] usb usb2: root hub lost power or was reset
- [ 1438.660000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1438.660000] [sw-ohci1]: open clock
- [ 1438.740000] usb usb3: root hub lost power or was reset
- [ 1438.980000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1438.980000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1438.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1438.990000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:44
- [ 1439.000000] val = 0xe,pre_rest_vol = 48,rest_vol = 48
- [ 1439.010000] [AXP]=======================val = 0x0
- [ 1439.010000] pmu_resume_chgcur = 300000
- [ 1439.020000] [audio codec]:resume start
- [ 1439.020000] codec_resume_events,1271
- [ 1439.020000] [audio codec]:resume end
- [ 1439.030000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1439.030000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1439.040000] [mmc_pm]: No sdio card, please check your config !!
- [ 1439.040000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1439.150000] [CSI]csi_resume
- [ 1439.150000] PM: resume of devices complete after 748.632 msecs
- [ 1439.150000] [pm]aw_pm_end!
- [ 1439.160000] PM: Finishing wakeup.
- [ 1439.160000] Restarting tasks ... done.
- [ 1439.230000] suspend: exit suspend, ret = 0 (2012-04-24 18:59:25.749907891 UTC)
- [ 1439.230000] active wake lock unknown_wakeups, time left 500
- [ 1439.670000] ====pa turn on===
- [ 1444.240000] [pm]valid
- [ 1444.240000] PM: Syncing filesystems ... done.
- [ 1444.240000] PM: Preparing system for mem sleep
- [ 1444.250000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1444.280000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1444.300000] PM: Entering mem sleep
- [ 1444.300000] [pm]3 state begin
- [ 1444.300000] [CSI]csi_suspend
- [ 1444.310000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1444.310000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1444.320000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1444.330000] [audio codec]:suspend start5000
- [ 1444.980000] [audio codec]:suspend end
- [ 1444.980000] pmu_suspend_chgcur = 1000000
- [ 1444.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1444.990000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:50
- [ 1445.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.000000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:50
- [ 1445.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.010000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:50
- [ 1445.020000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.030000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:50
- [ 1445.030000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.040000] sunxi-rtc sunxi-rtc: read time 2012-4-24 18:58:50
- [ 1445.040000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1445.050000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1445.050000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1445.060000] [sw-ohci1]: close clock
- [ 1445.060000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1445.070000] [sw-ehci1]: Set USB Power OFF
- [ 1445.070000] [sw-ehci1]: close clock
- [ 1445.080000] [sw_hcd0]: sw_hcd_suspend start
- [ 1445.080000] wrn: hcd is disable, need not enter to suspend
- [ 1445.090000] [sw_udc]: sw_udc_suspend start
- [ 1445.090000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1445.100000] [i2c2] suspend okay..
- [ 1445.100000] [i2c1] suspend okay..
- [ 1445.100000] [NAND] nand_suspend
- [ 1445.110000] [NAND] nand_suspend ok
- [ 1445.110000] [sw_dmac_suspend] enter
- [ 1445.110000] PM: suspend of devices complete after 808.504 msecs
- [ 1445.120000] [pm]prepare
- [ 1445.120000] PM: late suspend of devices complete after 0.256 msecs
- [ 1445.130000] [pm]prepare_late
- [ 1445.130000] [pm]enter state 3
- [ 1445.130000] [pm]platform wakeup, wakesource is:0x10
- [ 1445.140000] PM: early resume of devices complete after 0.153 msecs
- [ 1445.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.150000] [pm]platform wakeup finish
- [ 1445.150000] [sw_dmac_resume] enter
- [ 1445.160000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:21
- [ 1445.160000] wakeup wake lock: alarm_rtc
- [ 1445.170000] [NAND] nand_resume
- [ 1445.170000] [NAND] nand gpio_request
- [ 1445.170000] twi1, apb clock = 24000000
- [ 1445.180000] [i2c1] resume okay..
- [ 1445.180000] twi2, apb clock = 24000000
- [ 1445.180000] [i2c2] resume okay..
- [ 1445.190000] [sw_udc]: sw_udc_resume start
- [ 1445.190000] [sw_udc]: udc is disable, need not enter to resume
- [ 1445.200000] [sw_hcd0]: sw_hcd_resume start
- [ 1445.200000] wrn: hcd is disable, need not resume
- [ 1445.230000] wemac wemac.0: resetting device
- [ 1445.230000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1445.240000] [sw-ehci1]: open clock
- [ 1445.260000] [sw-ehci1]: Set USB Power ON
- [ 1445.260000] [sw-ehci1]: lost power, restarting
- [ 1445.270000] usb usb2: root hub lost power or was reset
- [ 1445.420000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1445.420000] [sw-ohci1]: open clock
- [ 1445.500000] usb usb3: root hub lost power or was reset
- [ 1445.740000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1445.740000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1445.750000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1445.750000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:21
- [ 1445.760000] val = 0x18,pre_rest_vol = 48,rest_vol = 48
- [ 1445.770000] [AXP]=======================val = 0x0
- [ 1445.770000] pmu_resume_chgcur = 300000
- [ 1445.780000] [audio codec]:resume start
- [ 1445.780000] codec_resume_events,1271
- [ 1445.780000] [audio codec]:resume end
- [ 1445.790000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1445.790000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1445.800000] [mmc_pm]: No sdio card, please check your config !!
- [ 1445.800000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1445.910000] [CSI]csi_resume
- [ 1445.910000] PM: resume of devices complete after 756.632 msecs
- [ 1445.910000] [pm]aw_pm_end!
- [ 1445.920000] PM: Finishing wakeup.
- [ 1445.920000] Restarting tasks ... done.
- [ 1445.950000] suspend: exit suspend, ret = 0 (2012-04-24 19:24:02.763521386 UTC)
- [ 1446.430000] ====pa turn on===
- [ 1450.970000] [pm]valid
- [ 1450.980000] PM: Syncing filesystems ... done.
- [ 1450.980000] PM: Preparing system for mem sleep
- [ 1450.980000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1451.020000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1451.040000] PM: Entering mem sleep
- [ 1451.040000] [pm]3 state begin
- [ 1451.040000] [CSI]csi_suspend
- [ 1451.050000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1451.050000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1451.060000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1451.070000] [audio codec]:suspend start5000
- [ 1451.720000] [audio codec]:suspend end
- [ 1451.720000] pmu_suspend_chgcur = 1000000
- [ 1451.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.730000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:27
- [ 1451.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.740000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:27
- [ 1451.750000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.750000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:27
- [ 1451.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.760000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:27
- [ 1451.770000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.770000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:23:27
- [ 1451.780000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1451.790000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1451.790000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1451.800000] [sw-ohci1]: close clock
- [ 1451.800000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1451.810000] [sw-ehci1]: Set USB Power OFF
- [ 1451.810000] [sw-ehci1]: close clock
- [ 1451.810000] [sw_hcd0]: sw_hcd_suspend start
- [ 1451.820000] wrn: hcd is disable, need not enter to suspend
- [ 1451.820000] [sw_udc]: sw_udc_suspend start
- [ 1451.830000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1451.830000] [i2c2] suspend okay..
- [ 1451.840000] [i2c1] suspend okay..
- [ 1451.840000] [NAND] nand_suspend
- [ 1451.840000] [NAND] nand_suspend ok
- [ 1451.850000] [sw_dmac_suspend] enter
- [ 1451.850000] PM: suspend of devices complete after 806.443 msecs
- [ 1451.860000] [pm]prepare
- [ 1451.860000] PM: late suspend of devices complete after 0.256 msecs
- [ 1451.870000] [pm]prepare_late
- [ 1451.870000] [pm]enter state 3
- [ 1451.870000] [pm]platform wakeup, wakesource is:0x10
- [ 1451.870000] PM: early resume of devices complete after 0.156 msecs
- [ 1451.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1451.890000] [pm]platform wakeup finish
- [ 1451.890000] [sw_dmac_resume] enter
- [ 1451.890000] [NAND] nand_resume
- [ 1451.900000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:44
- [ 1451.900000] wakeup wake lock: alarm_rtc
- [ 1451.910000] [NAND] nand gpio_request
- [ 1451.910000] twi1, apb clock = 24000000
- [ 1451.910000] [i2c1] resume okay..
- [ 1451.920000] twi2, apb clock = 24000000
- [ 1451.920000] [i2c2] resume okay..
- [ 1451.920000] [sw_udc]: sw_udc_resume start
- [ 1451.930000] [sw_udc]: udc is disable, need not enter to resume
- [ 1451.930000] [sw_hcd0]: sw_hcd_resume start
- [ 1451.940000] wrn: hcd is disable, need not resume
- [ 1451.960000] wemac wemac.0: resetting device
- [ 1451.960000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1451.970000] [sw-ehci1]: open clock
- [ 1451.990000] [sw-ehci1]: Set USB Power ON
- [ 1451.990000] [sw-ehci1]: lost power, restarting
- [ 1452.000000] usb usb2: root hub lost power or was reset
- [ 1452.150000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1452.150000] [sw-ohci1]: open clock
- [ 1452.230000] usb usb3: root hub lost power or was reset
- [ 1452.470000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1452.470000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1452.480000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1452.480000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:44
- [ 1452.490000] val = 0x1a,pre_rest_vol = 48,rest_vol = 48
- [ 1452.500000] [AXP]=======================val = 0x0
- [ 1452.500000] pmu_resume_chgcur = 300000
- [ 1452.510000] [audio codec]:resume start
- [ 1452.510000] codec_resume_events,1271
- [ 1452.510000] [audio codec]:resume end
- [ 1452.520000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1452.520000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1452.530000] [mmc_pm]: No sdio card, please check your config !!
- [ 1452.530000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1452.640000] [CSI]csi_resume
- [ 1452.640000] PM: resume of devices complete after 748.579 msecs
- [ 1452.640000] [pm]aw_pm_end!
- [ 1452.650000] PM: Finishing wakeup.
- [ 1452.650000] Restarting tasks ... done.
- [ 1452.710000] suspend: exit suspend, ret = 0 (2012-04-24 19:29:25.828535296 UTC)
- [ 1452.740000] active wake lock unknown_wakeups, time left 500
- [ 1453.160000] ====pa turn on===
- [ 1457.750000] [pm]valid
- [ 1457.750000] PM: Syncing filesystems ... done.
- [ 1457.750000] PM: Preparing system for mem sleep
- [ 1457.760000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1457.790000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1457.810000] PM: Entering mem sleep
- [ 1457.810000] [pm]3 state begin
- [ 1457.810000] [CSI]csi_suspend
- [ 1457.820000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1457.820000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1457.830000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1457.840000] [audio codec]:suspend start5000
- [ 1458.490000] [audio codec]:suspend end
- [ 1458.490000] pmu_suspend_chgcur = 1000000
- [ 1458.500000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.500000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:50
- [ 1458.510000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.510000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:50
- [ 1458.520000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.520000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:50
- [ 1458.530000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.530000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:50
- [ 1458.540000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.540000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:28:50
- [ 1458.550000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1458.560000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1458.560000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1458.570000] [sw-ohci1]: close clock
- [ 1458.570000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1458.580000] [sw-ehci1]: Set USB Power OFF
- [ 1458.580000] [sw-ehci1]: close clock
- [ 1458.580000] [sw_hcd0]: sw_hcd_suspend start
- [ 1458.590000] wrn: hcd is disable, need not enter to suspend
- [ 1458.590000] [sw_udc]: sw_udc_suspend start
- [ 1458.600000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1458.600000] [i2c2] suspend okay..
- [ 1458.610000] [i2c1] suspend okay..
- [ 1458.610000] [NAND] nand_suspend
- [ 1458.610000] [NAND] nand_suspend ok
- [ 1458.620000] [sw_dmac_suspend] enter
- [ 1458.620000] PM: suspend of devices complete after 806.405 msecs
- [ 1458.630000] [pm]prepare
- [ 1458.630000] PM: late suspend of devices complete after 0.255 msecs
- [ 1458.640000] [pm]prepare_late
- [ 1458.640000] [pm]enter state 3
- [ 1458.640000] [pm]platform wakeup, wakesource is:0x10
- [ 1458.640000] PM: early resume of devices complete after 0.153 msecs
- [ 1458.650000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1458.660000] [pm]platform wakeup finish
- [ 1458.660000] [sw_dmac_resume] enter
- [ 1458.660000] [NAND] nand_resume
- [ 1458.670000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:22
- [ 1458.670000] wakeup wake lock: alarm_rtc
- [ 1458.680000] [NAND] nand gpio_request
- [ 1458.680000] twi1, apb clock = 24000000
- [ 1458.680000] [i2c1] resume okay..
- [ 1458.690000] twi2, apb clock = 24000000
- [ 1458.690000] [i2c2] resume okay..
- [ 1458.690000] [sw_udc]: sw_udc_resume start
- [ 1458.700000] [sw_udc]: udc is disable, need not enter to resume
- [ 1458.700000] [sw_hcd0]: sw_hcd_resume start
- [ 1458.710000] wrn: hcd is disable, need not resume
- [ 1458.730000] wemac wemac.0: resetting device
- [ 1458.730000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1458.740000] [sw-ehci1]: open clock
- [ 1458.760000] [sw-ehci1]: Set USB Power ON
- [ 1458.760000] [sw-ehci1]: lost power, restarting
- [ 1458.770000] usb usb2: root hub lost power or was reset
- [ 1458.920000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1458.920000] [sw-ohci1]: open clock
- [ 1459.000000] usb usb3: root hub lost power or was reset
- [ 1459.240000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1459.240000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1459.250000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1459.250000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:22
- [ 1459.260000] val = 0x28,pre_rest_vol = 47,rest_vol = 47
- [ 1459.270000] [AXP]=======================val = 0x0
- [ 1459.270000] pmu_resume_chgcur = 300000
- [ 1459.280000] [audio codec]:resume start
- [ 1459.280000] codec_resume_events,1271
- [ 1459.280000] [audio codec]:resume end
- [ 1459.290000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1459.290000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1459.300000] [mmc_pm]: No sdio card, please check your config !!
- [ 1459.300000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1459.410000] [CSI]csi_resume
- [ 1459.410000] PM: resume of devices complete after 748.654 msecs
- [ 1459.410000] [pm]aw_pm_end!
- [ 1459.420000] PM: Finishing wakeup.
- [ 1459.420000] Restarting tasks ... done.
- [ 1459.480000] suspend: exit suspend, ret = 0 (2012-04-24 19:54:03.898081946 UTC)
- [ 1459.930000] ====pa turn on===
- [ 1464.510000] [pm]valid
- [ 1464.510000] PM: Syncing filesystems ... done.
- [ 1464.510000] PM: Preparing system for mem sleep
- [ 1464.520000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1464.550000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1464.570000] PM: Entering mem sleep
- [ 1464.570000] [pm]3 state begin
- [ 1464.570000] [CSI]csi_suspend
- [ 1464.580000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1464.580000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1464.590000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1464.600000] [audio codec]:suspend start5000
- [ 1465.250000] [audio codec]:suspend end
- [ 1465.250000] pmu_suspend_chgcur = 1000000
- [ 1465.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.260000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:28
- [ 1465.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.270000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:28
- [ 1465.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.280000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:28
- [ 1465.290000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.300000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:28
- [ 1465.300000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.310000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:53:28
- [ 1465.310000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1465.320000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1465.320000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1465.330000] [sw-ohci1]: close clock
- [ 1465.330000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1465.340000] [sw-ehci1]: Set USB Power OFF
- [ 1465.340000] [sw-ehci1]: close clock
- [ 1465.350000] [sw_hcd0]: sw_hcd_suspend start
- [ 1465.350000] wrn: hcd is disable, need not enter to suspend
- [ 1465.360000] [sw_udc]: sw_udc_suspend start
- [ 1465.360000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1465.370000] [i2c2] suspend okay..
- [ 1465.370000] [i2c1] suspend okay..
- [ 1465.370000] [NAND] nand_suspend
- [ 1465.380000] [NAND] nand_suspend ok
- [ 1465.380000] [sw_dmac_suspend] enter
- [ 1465.380000] PM: suspend of devices complete after 808.514 msecs
- [ 1465.390000] [pm]prepare
- [ 1465.390000] PM: late suspend of devices complete after 0.259 msecs
- [ 1465.400000] [pm]prepare_late
- [ 1465.400000] [pm]enter state 3
- [ 1465.400000] [pm]platform wakeup, wakesource is:0x10
- [ 1465.410000] PM: early resume of devices complete after 0.153 msecs
- [ 1465.410000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1465.420000] [pm]platform wakeup finish
- [ 1465.420000] [sw_dmac_resume] enter
- [ 1465.430000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:43
- [ 1465.430000] wakeup wake lock: alarm_rtc
- [ 1465.440000] [NAND] nand_resume
- [ 1465.440000] [NAND] nand gpio_request
- [ 1465.440000] twi1, apb clock = 24000000
- [ 1465.450000] [i2c1] resume okay..
- [ 1465.450000] twi2, apb clock = 24000000
- [ 1465.450000] [i2c2] resume okay..
- [ 1465.460000] [sw_udc]: sw_udc_resume start
- [ 1465.460000] [sw_udc]: udc is disable, need not enter to resume
- [ 1465.470000] [sw_hcd0]: sw_hcd_resume start
- [ 1465.470000] wrn: hcd is disable, need not resume
- [ 1465.500000] wemac wemac.0: resetting device
- [ 1465.500000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1465.510000] [sw-ehci1]: open clock
- [ 1465.530000] [sw-ehci1]: Set USB Power ON
- [ 1465.530000] [sw-ehci1]: lost power, restarting
- [ 1465.540000] usb usb2: root hub lost power or was reset
- [ 1465.690000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1465.690000] [sw-ohci1]: open clock
- [ 1465.770000] usb usb3: root hub lost power or was reset
- [ 1466.010000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1466.010000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1466.020000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1466.020000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:43
- [ 1466.030000] val = 0x2a,pre_rest_vol = 46,rest_vol = 46
- [ 1466.040000] [AXP]=======================val = 0x0
- [ 1466.040000] pmu_resume_chgcur = 300000
- [ 1466.050000] [audio codec]:resume start
- [ 1466.050000] codec_resume_events,1271
- [ 1466.050000] [audio codec]:resume end
- [ 1466.060000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1466.060000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1466.070000] [mmc_pm]: No sdio card, please check your config !!
- [ 1466.070000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1466.180000] [CSI]csi_resume
- [ 1466.180000] PM: resume of devices complete after 756.576 msecs
- [ 1466.180000] [pm]aw_pm_end!
- [ 1466.190000] PM: Finishing wakeup.
- [ 1466.190000] Restarting tasks ... done.
- [ 1466.250000] suspend: exit suspend, ret = 0 (2012-04-24 19:59:24.968780113 UTC)
- [ 1466.290000] active wake lock unknown_wakeups, time left 500
- [ 1466.700000] ====pa turn on===
- [ 1471.300000] [pm]valid
- [ 1471.300000] PM: Syncing filesystems ... done.
- [ 1471.300000] PM: Preparing system for mem sleep
- [ 1471.310000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1471.340000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1471.360000] PM: Entering mem sleep
- [ 1471.360000] [pm]3 state begin
- [ 1471.360000] [CSI]csi_suspend
- [ 1471.370000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1471.370000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1471.380000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1471.390000] [audio codec]:suspend start5000
- [ 1472.040000] [audio codec]:suspend end
- [ 1472.040000] pmu_suspend_chgcur = 1000000
- [ 1472.050000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.050000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:49
- [ 1472.060000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.060000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:49
- [ 1472.070000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.070000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:49
- [ 1472.080000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.080000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:49
- [ 1472.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.090000] sunxi-rtc sunxi-rtc: read time 2012-4-24 19:58:49
- [ 1472.100000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1472.110000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1472.110000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1472.120000] [sw-ohci1]: close clock
- [ 1472.120000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1472.130000] [sw-ehci1]: Set USB Power OFF
- [ 1472.130000] [sw-ehci1]: close clock
- [ 1472.130000] [sw_hcd0]: sw_hcd_suspend start
- [ 1472.140000] wrn: hcd is disable, need not enter to suspend
- [ 1472.140000] [sw_udc]: sw_udc_suspend start
- [ 1472.150000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1472.150000] [i2c2] suspend okay..
- [ 1472.160000] [i2c1] suspend okay..
- [ 1472.160000] [NAND] nand_suspend
- [ 1472.160000] [NAND] nand_suspend ok
- [ 1472.170000] [sw_dmac_suspend] enter
- [ 1472.170000] PM: suspend of devices complete after 806.387 msecs
- [ 1472.180000] [pm]prepare
- [ 1472.180000] PM: late suspend of devices complete after 0.259 msecs
- [ 1472.190000] [pm]prepare_late
- [ 1472.190000] [pm]enter state 3
- [ 1472.190000] [pm]platform wakeup, wakesource is:0x10
- [ 1472.190000] PM: early resume of devices complete after 0.155 msecs
- [ 1472.200000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.210000] [pm]platform wakeup finish
- [ 1472.210000] [sw_dmac_resume] enter
- [ 1472.210000] [NAND] nand_resume
- [ 1472.220000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:23
- [ 1472.220000] wakeup wake lock: alarm_rtc
- [ 1472.230000] [NAND] nand gpio_request
- [ 1472.230000] twi1, apb clock = 24000000
- [ 1472.230000] [i2c1] resume okay..
- [ 1472.240000] twi2, apb clock = 24000000
- [ 1472.240000] [i2c2] resume okay..
- [ 1472.240000] [sw_udc]: sw_udc_resume start
- [ 1472.250000] [sw_udc]: udc is disable, need not enter to resume
- [ 1472.250000] [sw_hcd0]: sw_hcd_resume start
- [ 1472.260000] wrn: hcd is disable, need not resume
- [ 1472.280000] wemac wemac.0: resetting device
- [ 1472.280000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1472.290000] [sw-ehci1]: open clock
- [ 1472.310000] [sw-ehci1]: Set USB Power ON
- [ 1472.310000] [sw-ehci1]: lost power, restarting
- [ 1472.320000] usb usb2: root hub lost power or was reset
- [ 1472.470000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1472.470000] [sw-ohci1]: open clock
- [ 1472.550000] usb usb3: root hub lost power or was reset
- [ 1472.790000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1472.790000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1472.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1472.800000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:23
- [ 1472.810000] val = 0x38,pre_rest_vol = 46,rest_vol = 56
- [ 1472.820000] battery vol change: 46->56
- [ 1472.820000] [AXP]=======================val = 0x0
- [ 1472.830000] pmu_resume_chgcur = 300000
- [ 1472.830000] [audio codec]:resume start
- [ 1472.830000] codec_resume_events,1271
- [ 1472.840000] [audio codec]:resume end
- [ 1472.840000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1472.850000] [mmc_pm]: No sdio card, please check your config !!
- [ 1472.850000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1472.860000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1472.960000] [CSI]csi_resume
- [ 1472.960000] PM: resume of devices complete after 748.644 msecs
- [ 1472.960000] [pm]aw_pm_end!
- [ 1472.970000] PM: Finishing wakeup.
- [ 1472.970000] Restarting tasks ... done.
- [ 1473.020000] suspend: exit suspend, ret = 0 (2012-04-24 20:24:05.043682848 UTC)
- [ 1473.500000] ====pa turn on===
- [ 1478.120000] [pm]valid
- [ 1478.130000] PM: Syncing filesystems ... done.
- [ 1478.130000] PM: Preparing system for mem sleep
- [ 1478.140000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1478.170000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1478.190000] PM: Entering mem sleep
- [ 1478.190000] [pm]3 state begin
- [ 1478.190000] [CSI]csi_suspend
- [ 1478.200000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1478.200000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1478.210000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1478.220000] [audio codec]:suspend start5000
- [ 1478.870000] [audio codec]:suspend end
- [ 1478.870000] pmu_suspend_chgcur = 1000000
- [ 1478.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1478.880000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:29
- [ 1478.890000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1478.890000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:29
- [ 1478.900000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1478.900000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:29
- [ 1478.910000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1478.910000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:29
- [ 1478.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1478.920000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:23:29
- [ 1478.930000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1478.940000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1478.940000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1478.950000] [sw-ohci1]: close clock
- [ 1478.950000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1478.960000] [sw-ehci1]: Set USB Power OFF
- [ 1478.960000] [sw-ehci1]: close clock
- [ 1478.960000] [sw_hcd0]: sw_hcd_suspend start
- [ 1478.970000] wrn: hcd is disable, need not enter to suspend
- [ 1478.970000] [sw_udc]: sw_udc_suspend start
- [ 1478.980000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1478.980000] [i2c2] suspend okay..
- [ 1478.990000] [i2c1] suspend okay..
- [ 1478.990000] [NAND] nand_suspend
- [ 1478.990000] [NAND] nand_suspend ok
- [ 1479.000000] [sw_dmac_suspend] enter
- [ 1479.000000] PM: suspend of devices complete after 806.480 msecs
- [ 1479.010000] [pm]prepare
- [ 1479.010000] PM: late suspend of devices complete after 0.256 msecs
- [ 1479.020000] [pm]prepare_late
- [ 1479.020000] [pm]enter state 3
- [ 1479.020000] [pm]platform wakeup, wakesource is:0x10
- [ 1479.020000] PM: early resume of devices complete after 0.154 msecs
- [ 1479.030000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1479.040000] [pm]platform wakeup finish
- [ 1479.040000] [sw_dmac_resume] enter
- [ 1479.040000] [NAND] nand_resume
- [ 1479.050000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:43
- [ 1479.050000] wakeup wake lock: alarm_rtc
- [ 1479.060000] [NAND] nand gpio_request
- [ 1479.060000] twi1, apb clock = 24000000
- [ 1479.060000] [i2c1] resume okay..
- [ 1479.070000] twi2, apb clock = 24000000
- [ 1479.070000] [i2c2] resume okay..
- [ 1479.070000] [sw_udc]: sw_udc_resume start
- [ 1479.080000] [sw_udc]: udc is disable, need not enter to resume
- [ 1479.080000] [sw_hcd0]: sw_hcd_resume start
- [ 1479.090000] wrn: hcd is disable, need not resume
- [ 1479.110000] wemac wemac.0: resetting device
- [ 1479.110000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1479.120000] [sw-ehci1]: open clock
- [ 1479.140000] [sw-ehci1]: Set USB Power ON
- [ 1479.140000] [sw-ehci1]: lost power, restarting
- [ 1479.150000] usb usb2: root hub lost power or was reset
- [ 1479.300000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1479.300000] [sw-ohci1]: open clock
- [ 1479.380000] usb usb3: root hub lost power or was reset
- [ 1479.620000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1479.620000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1479.630000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1479.630000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:43
- [ 1479.640000] val = 0x3a,pre_rest_vol = 56,rest_vol = 58
- [ 1479.650000] battery vol change: 56->58
- [ 1479.650000] [AXP]=======================val = 0x0
- [ 1479.660000] pmu_resume_chgcur = 300000
- [ 1479.660000] [audio codec]:resume start
- [ 1479.660000] codec_resume_events,1271
- [ 1479.670000] [audio codec]:resume end
- [ 1479.670000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1479.680000] [mmc_pm]: No sdio card, please check your config !!
- [ 1479.680000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1479.690000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1479.790000] [CSI]csi_resume
- [ 1479.790000] PM: resume of devices complete after 748.536 msecs
- [ 1479.790000] [pm]aw_pm_end!
- [ 1479.800000] PM: Finishing wakeup.
- [ 1479.800000] Restarting tasks ... done.
- [ 1479.850000] suspend: exit suspend, ret = 0 (2012-04-24 20:29:25.169483108 UTC)
- [ 1479.910000] active wake lock unknown_wakeups, time left 500
- [ 1480.330000] ====pa turn on===
- [ 1484.920000] [pm]valid
- [ 1484.920000] PM: Syncing filesystems ... done.
- [ 1484.920000] PM: Preparing system for mem sleep
- [ 1484.930000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1484.960000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1484.980000] PM: Entering mem sleep
- [ 1484.980000] [pm]3 state begin
- [ 1484.980000] [CSI]csi_suspend
- [ 1484.990000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1484.990000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1485.000000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1485.010000] [audio codec]:suspend start5000
- [ 1485.660000] [audio codec]:suspend end
- [ 1485.660000] pmu_suspend_chgcur = 1000000
- [ 1485.670000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.670000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:49
- [ 1485.680000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.680000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:49
- [ 1485.690000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.700000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:49
- [ 1485.700000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.710000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:49
- [ 1485.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.720000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:28:49
- [ 1485.720000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1485.730000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1485.730000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1485.740000] [sw-ohci1]: close clock
- [ 1485.740000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1485.750000] [sw-ehci1]: Set USB Power OFF
- [ 1485.750000] [sw-ehci1]: close clock
- [ 1485.760000] [sw_hcd0]: sw_hcd_suspend start
- [ 1485.760000] wrn: hcd is disable, need not enter to suspend
- [ 1485.770000] [sw_udc]: sw_udc_suspend start
- [ 1485.770000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1485.780000] [i2c2] suspend okay..
- [ 1485.780000] [i2c1] suspend okay..
- [ 1485.780000] [NAND] nand_suspend
- [ 1485.790000] [NAND] nand_suspend ok
- [ 1485.790000] [sw_dmac_suspend] enter
- [ 1485.790000] PM: suspend of devices complete after 808.539 msecs
- [ 1485.800000] [pm]prepare
- [ 1485.800000] PM: late suspend of devices complete after 0.257 msecs
- [ 1485.810000] [pm]prepare_late
- [ 1485.810000] [pm]enter state 3
- [ 1485.810000] [pm]platform wakeup, wakesource is:0x10
- [ 1485.820000] PM: early resume of devices complete after 0.155 msecs
- [ 1485.820000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1485.830000] [pm]platform wakeup finish
- [ 1485.830000] [sw_dmac_resume] enter
- [ 1485.840000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:42
- [ 1485.840000] wakeup wake lock: alarm_rtc
- [ 1485.850000] [NAND] nand_resume
- [ 1485.850000] [NAND] nand gpio_request
- [ 1485.850000] twi1, apb clock = 24000000
- [ 1485.860000] [i2c1] resume okay..
- [ 1485.860000] twi2, apb clock = 24000000
- [ 1485.860000] [i2c2] resume okay..
- [ 1485.870000] [sw_udc]: sw_udc_resume start
- [ 1485.870000] [sw_udc]: udc is disable, need not enter to resume
- [ 1485.880000] [sw_hcd0]: sw_hcd_resume start
- [ 1485.880000] wrn: hcd is disable, need not resume
- [ 1485.910000] wemac wemac.0: resetting device
- [ 1485.910000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1485.920000] [sw-ehci1]: open clock
- [ 1485.940000] [sw-ehci1]: Set USB Power ON
- [ 1485.940000] [sw-ehci1]: lost power, restarting
- [ 1485.950000] usb usb2: root hub lost power or was reset
- [ 1486.100000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1486.100000] [sw-ohci1]: open clock
- [ 1486.180000] usb usb3: root hub lost power or was reset
- [ 1486.420000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1486.420000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1486.430000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1486.430000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:42
- [ 1486.440000] val = 0x3f,pre_rest_vol = 58,rest_vol = 63
- [ 1486.450000] battery vol change: 58->63
- [ 1486.450000] [AXP]=======================val = 0x0
- [ 1486.460000] pmu_resume_chgcur = 300000
- [ 1486.460000] [audio codec]:resume start
- [ 1486.460000] codec_resume_events,1271
- [ 1486.470000] [audio codec]:resume end
- [ 1486.470000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1486.480000] [mmc_pm]: No sdio card, please check your config !!
- [ 1486.480000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1486.490000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1486.590000] [CSI]csi_resume
- [ 1486.590000] PM: resume of devices complete after 756.602 msecs
- [ 1486.590000] [pm]aw_pm_end!
- [ 1486.600000] PM: Finishing wakeup.
- [ 1486.600000] Restarting tasks ... done.
- [ 1486.650000] suspend: exit suspend, ret = 0 (2012-04-24 20:37:24.262492857 UTC)
- [ 1487.130000] ====pa turn on===
- [ 1491.670000] [pm]valid
- [ 1491.670000] PM: Syncing filesystems ... done.
- [ 1491.670000] PM: Preparing system for mem sleep
- [ 1491.680000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1491.710000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1491.730000] PM: Entering mem sleep
- [ 1491.730000] [pm]3 state begin
- [ 1491.730000] [CSI]csi_suspend
- [ 1491.740000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1491.740000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1491.750000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1491.760000] [audio codec]:suspend start5000
- [ 1492.410000] [audio codec]:suspend end
- [ 1492.410000] pmu_suspend_chgcur = 1000000
- [ 1492.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.420000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:48
- [ 1492.430000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.430000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:48
- [ 1492.440000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.440000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:48
- [ 1492.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.450000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:48
- [ 1492.460000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.460000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:36:48
- [ 1492.470000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1492.480000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1492.480000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1492.490000] [sw-ohci1]: close clock
- [ 1492.490000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1492.500000] [sw-ehci1]: Set USB Power OFF
- [ 1492.500000] [sw-ehci1]: close clock
- [ 1492.500000] [sw_hcd0]: sw_hcd_suspend start
- [ 1492.510000] wrn: hcd is disable, need not enter to suspend
- [ 1492.510000] [sw_udc]: sw_udc_suspend start
- [ 1492.520000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1492.520000] [i2c2] suspend okay..
- [ 1492.530000] [i2c1] suspend okay..
- [ 1492.530000] [NAND] nand_suspend
- [ 1492.530000] [NAND] nand_suspend ok
- [ 1492.540000] [sw_dmac_suspend] enter
- [ 1492.540000] PM: suspend of devices complete after 806.379 msecs
- [ 1492.550000] [pm]prepare
- [ 1492.550000] PM: late suspend of devices complete after 0.253 msecs
- [ 1492.560000] [pm]prepare_late
- [ 1492.560000] [pm]enter state 3
- [ 1492.560000] [pm]platform wakeup, wakesource is:0x10
- [ 1492.560000] PM: early resume of devices complete after 0.155 msecs
- [ 1492.570000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1492.580000] [pm]platform wakeup finish
- [ 1492.580000] [sw_dmac_resume] enter
- [ 1492.580000] [NAND] nand_resume
- [ 1492.590000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:24
- [ 1492.590000] wakeup wake lock: alarm_rtc
- [ 1492.600000] [NAND] nand gpio_request
- [ 1492.600000] twi1, apb clock = 24000000
- [ 1492.600000] [i2c1] resume okay..
- [ 1492.610000] twi2, apb clock = 24000000
- [ 1492.610000] [i2c2] resume okay..
- [ 1492.610000] [sw_udc]: sw_udc_resume start
- [ 1492.620000] [sw_udc]: udc is disable, need not enter to resume
- [ 1492.620000] [sw_hcd0]: sw_hcd_resume start
- [ 1492.630000] wrn: hcd is disable, need not resume
- [ 1492.650000] wemac wemac.0: resetting device
- [ 1492.650000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1492.660000] [sw-ehci1]: open clock
- [ 1492.680000] [sw-ehci1]: Set USB Power ON
- [ 1492.680000] [sw-ehci1]: lost power, restarting
- [ 1492.690000] usb usb2: root hub lost power or was reset
- [ 1492.840000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1492.840000] [sw-ohci1]: open clock
- [ 1492.920000] usb usb3: root hub lost power or was reset
- [ 1493.160000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1493.160000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1493.170000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1493.170000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:24
- [ 1493.180000] val = 0x49,pre_rest_vol = 63,rest_vol = 73
- [ 1493.190000] battery vol change: 63->73
- [ 1493.190000] [AXP]=======================val = 0x0
- [ 1493.200000] pmu_resume_chgcur = 300000
- [ 1493.200000] [audio codec]:resume start
- [ 1493.200000] codec_resume_events,1271
- [ 1493.210000] [audio codec]:resume end
- [ 1493.210000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1493.220000] [mmc_pm]: No sdio card, please check your config !!
- [ 1493.220000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1493.230000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1493.330000] [CSI]csi_resume
- [ 1493.330000] PM: resume of devices complete after 748.639 msecs
- [ 1493.330000] [pm]aw_pm_end!
- [ 1493.340000] PM: Finishing wakeup.
- [ 1493.340000] Restarting tasks ... done.
- [ 1493.380000] suspend: exit suspend, ret = 0 (2012-04-24 20:54:06.302094860 UTC)
- [ 1493.870000] ====pa turn on===
- [ 1498.510000] [pm]valid
- [ 1498.510000] PM: Syncing filesystems ... done.
- [ 1498.520000] PM: Preparing system for mem sleep
- [ 1498.520000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1498.550000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1498.570000] PM: Entering mem sleep
- [ 1498.570000] [pm]3 state begin
- [ 1498.570000] [CSI]csi_suspend
- [ 1498.580000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1498.580000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1498.590000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1498.600000] [audio codec]:suspend start5000
- [ 1499.250000] [audio codec]:suspend end
- [ 1499.250000] pmu_suspend_chgcur = 1000000
- [ 1499.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.260000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:30
- [ 1499.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.270000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:30
- [ 1499.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.280000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:30
- [ 1499.290000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.300000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:30
- [ 1499.300000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.310000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:53:30
- [ 1499.310000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1499.320000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1499.320000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1499.330000] [sw-ohci1]: close clock
- [ 1499.330000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1499.340000] [sw-ehci1]: Set USB Power OFF
- [ 1499.340000] [sw-ehci1]: close clock
- [ 1499.350000] [sw_hcd0]: sw_hcd_suspend start
- [ 1499.350000] wrn: hcd is disable, need not enter to suspend
- [ 1499.350000] [sw_udc]: sw_udc_suspend start
- [ 1499.360000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1499.370000] [i2c2] suspend okay..
- [ 1499.370000] [i2c1] suspend okay..
- [ 1499.370000] [NAND] nand_suspend
- [ 1499.380000] [NAND] nand_suspend ok
- [ 1499.380000] [sw_dmac_suspend] enter
- [ 1499.380000] PM: suspend of devices complete after 807.554 msecs
- [ 1499.390000] [pm]prepare
- [ 1499.390000] PM: late suspend of devices complete after 0.254 msecs
- [ 1499.400000] [pm]prepare_late
- [ 1499.400000] [pm]enter state 3
- [ 1499.400000] [pm]platform wakeup, wakesource is:0x10
- [ 1499.410000] PM: early resume of devices complete after 0.155 msecs
- [ 1499.410000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1499.420000] [pm]platform wakeup finish
- [ 1499.420000] [sw_dmac_resume] enter
- [ 1499.430000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:43
- [ 1499.430000] wakeup wake lock: alarm_rtc
- [ 1499.430000] [NAND] nand_resume
- [ 1499.440000] [NAND] nand gpio_request
- [ 1499.440000] twi1, apb clock = 24000000
- [ 1499.450000] [i2c1] resume okay..
- [ 1499.450000] twi2, apb clock = 24000000
- [ 1499.450000] [i2c2] resume okay..
- [ 1499.460000] [sw_udc]: sw_udc_resume start
- [ 1499.460000] [sw_udc]: udc is disable, need not enter to resume
- [ 1499.470000] [sw_hcd0]: sw_hcd_resume start
- [ 1499.470000] wrn: hcd is disable, need not resume
- [ 1499.490000] wemac wemac.0: resetting device
- [ 1499.490000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1499.500000] [sw-ehci1]: open clock
- [ 1499.520000] [sw-ehci1]: Set USB Power ON
- [ 1499.520000] [sw-ehci1]: lost power, restarting
- [ 1499.530000] usb usb2: root hub lost power or was reset
- [ 1499.680000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1499.680000] [sw-ohci1]: open clock
- [ 1499.760000] usb usb3: root hub lost power or was reset
- [ 1500.000000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1500.000000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1500.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1500.010000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:43
- [ 1500.020000] val = 0x4c,pre_rest_vol = 73,rest_vol = 76
- [ 1500.030000] battery vol change: 73->76
- [ 1500.030000] [AXP]=======================val = 0x0
- [ 1500.040000] pmu_resume_chgcur = 300000
- [ 1500.040000] [audio codec]:resume start
- [ 1500.040000] codec_resume_events,1271
- [ 1500.050000] [audio codec]:resume end
- [ 1500.050000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1500.060000] [mmc_pm]: No sdio card, please check your config !!
- [ 1500.060000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1500.070000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1500.170000] [CSI]csi_resume
- [ 1500.170000] PM: resume of devices complete after 747.607 msecs
- [ 1500.170000] [pm]aw_pm_end!
- [ 1500.180000] PM: Finishing wakeup.
- [ 1500.180000] Restarting tasks ... done.
- [ 1500.210000] suspend: exit suspend, ret = 0 (2012-04-24 20:59:25.426752408 UTC)
- [ 1500.710000] ====pa turn on===
- [ 1505.220000] [pm]valid
- [ 1505.220000] PM: Syncing filesystems ... done.
- [ 1505.220000] PM: Preparing system for mem sleep
- [ 1505.240000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 1505.260000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1505.280000] PM: Entering mem sleep
- [ 1505.280000] [pm]3 state begin
- [ 1505.290000] [CSI]csi_suspend
- [ 1505.290000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1505.290000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1505.300000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1505.310000] [audio codec]:suspend start5000
- [ 1505.960000] [audio codec]:suspend end
- [ 1505.960000] pmu_suspend_chgcur = 1000000
- [ 1505.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1505.970000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:49
- [ 1505.980000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1505.980000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:49
- [ 1505.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1505.990000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:49
- [ 1506.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1506.010000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:49
- [ 1506.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1506.020000] sunxi-rtc sunxi-rtc: read time 2012-4-24 20:58:49
- [ 1506.020000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1506.030000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1506.030000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1506.040000] [sw-ohci1]: close clock
- [ 1506.040000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1506.050000] [sw-ehci1]: Set USB Power OFF
- [ 1506.050000] [sw-ehci1]: close clock
- [ 1506.060000] [sw_hcd0]: sw_hcd_suspend start
- [ 1506.060000] wrn: hcd is disable, need not enter to suspend
- [ 1506.070000] [sw_udc]: sw_udc_suspend start
- [ 1506.070000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1506.080000] [i2c2] suspend okay..
- [ 1506.080000] [i2c1] suspend okay..
- [ 1506.080000] [NAND] nand_suspend
- [ 1506.090000] [NAND] nand_suspend ok
- [ 1506.090000] [sw_dmac_suspend] enter
- [ 1506.090000] PM: suspend of devices complete after 806.805 msecs
- [ 1506.100000] [pm]prepare
- [ 1506.100000] PM: late suspend of devices complete after 0.253 msecs
- [ 1506.110000] [pm]prepare_late
- [ 1506.110000] [pm]enter state 3
- [ 1506.110000] [pm]platform wakeup, wakesource is:0x10
- [ 1506.120000] PM: early resume of devices complete after 0.157 msecs
- [ 1506.120000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1506.130000] [pm]platform wakeup finish
- [ 1506.130000] [sw_dmac_resume] enter
- [ 1506.140000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:25
- [ 1506.140000] wakeup wake lock: alarm_rtc
- [ 1506.150000] [NAND] nand_resume
- [ 1506.150000] [NAND] nand gpio_request
- [ 1506.150000] twi1, apb clock = 24000000
- [ 1506.160000] [i2c1] resume okay..
- [ 1506.160000] twi2, apb clock = 24000000
- [ 1506.160000] [i2c2] resume okay..
- [ 1506.170000] [sw_udc]: sw_udc_resume start
- [ 1506.170000] [sw_udc]: udc is disable, need not enter to resume
- [ 1506.180000] [sw_hcd0]: sw_hcd_resume start
- [ 1506.180000] wrn: hcd is disable, need not resume
- [ 1506.210000] wemac wemac.0: resetting device
- [ 1506.210000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1506.220000] [sw-ehci1]: open clock
- [ 1506.240000] [sw-ehci1]: Set USB Power ON
- [ 1506.240000] [sw-ehci1]: lost power, restarting
- [ 1506.250000] usb usb2: root hub lost power or was reset
- [ 1506.400000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1506.400000] [sw-ohci1]: open clock
- [ 1506.480000] usb usb3: root hub lost power or was reset
- [ 1506.720000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1506.720000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1506.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1506.730000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:25
- [ 1506.740000] val = 0x5a,pre_rest_vol = 76,rest_vol = 90
- [ 1506.750000] battery vol change: 76->90
- [ 1506.750000] [AXP]=======================val = 0x0
- [ 1506.760000] pmu_resume_chgcur = 300000
- [ 1506.760000] [audio codec]:resume start
- [ 1506.760000] codec_resume_events,1271
- [ 1506.770000] [audio codec]:resume end
- [ 1506.770000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1506.780000] [mmc_pm]: No sdio card, please check your config !!
- [ 1506.780000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1506.790000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1506.890000] [CSI]csi_resume
- [ 1506.890000] PM: resume of devices complete after 756.634 msecs
- [ 1506.890000] [pm]aw_pm_end!
- [ 1506.900000] PM: Finishing wakeup.
- [ 1506.900000] Restarting tasks ... done.
- [ 1506.950000] suspend: exit suspend, ret = 0 (2012-04-24 21:24:07.466376071 UTC)
- [ 1507.430000] ====pa turn on===
- [ 1512.040000] [pm]valid
- [ 1512.040000] PM: Syncing filesystems ... done.
- [ 1512.050000] PM: Preparing system for mem sleep
- [ 1512.050000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1512.080000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1512.100000] PM: Entering mem sleep
- [ 1512.100000] [pm]3 state begin
- [ 1512.100000] [CSI]csi_suspend
- [ 1512.110000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1512.110000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1512.120000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1512.130000] [audio codec]:suspend start5000
- [ 1512.780000] [audio codec]:suspend end
- [ 1512.780000] pmu_suspend_chgcur = 1000000
- [ 1512.790000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.790000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:31
- [ 1512.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.800000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:31
- [ 1512.810000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.810000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:31
- [ 1512.820000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.820000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:31
- [ 1512.830000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.830000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:23:31
- [ 1512.840000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1512.850000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1512.850000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1512.860000] [sw-ohci1]: close clock
- [ 1512.860000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1512.870000] [sw-ehci1]: Set USB Power OFF
- [ 1512.870000] [sw-ehci1]: close clock
- [ 1512.870000] [sw_hcd0]: sw_hcd_suspend start
- [ 1512.880000] wrn: hcd is disable, need not enter to suspend
- [ 1512.880000] [sw_udc]: sw_udc_suspend start
- [ 1512.890000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1512.890000] [i2c2] suspend okay..
- [ 1512.900000] [i2c1] suspend okay..
- [ 1512.900000] [NAND] nand_suspend
- [ 1512.900000] [NAND] nand_suspend ok
- [ 1512.910000] [sw_dmac_suspend] enter
- [ 1512.910000] PM: suspend of devices complete after 806.389 msecs
- [ 1512.920000] [pm]prepare
- [ 1512.920000] PM: late suspend of devices complete after 0.248 msecs
- [ 1512.930000] [pm]prepare_late
- [ 1512.930000] [pm]enter state 3
- [ 1512.930000] [pm]platform wakeup, wakesource is:0x10
- [ 1512.930000] PM: early resume of devices complete after 0.152 msecs
- [ 1512.940000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1512.950000] [pm]platform wakeup finish
- [ 1512.950000] [sw_dmac_resume] enter
- [ 1512.950000] [NAND] nand_resume
- [ 1512.960000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:43
- [ 1512.960000] wakeup wake lock: alarm_rtc
- [ 1512.970000] [NAND] nand gpio_request
- [ 1512.970000] twi1, apb clock = 24000000
- [ 1512.970000] [i2c1] resume okay..
- [ 1512.980000] twi2, apb clock = 24000000
- [ 1512.980000] [i2c2] resume okay..
- [ 1512.980000] [sw_udc]: sw_udc_resume start
- [ 1512.990000] [sw_udc]: udc is disable, need not enter to resume
- [ 1512.990000] [sw_hcd0]: sw_hcd_resume start
- [ 1513.000000] wrn: hcd is disable, need not resume
- [ 1513.020000] wemac wemac.0: resetting device
- [ 1513.020000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1513.030000] [sw-ehci1]: open clock
- [ 1513.050000] [sw-ehci1]: Set USB Power ON
- [ 1513.050000] [sw-ehci1]: lost power, restarting
- [ 1513.060000] usb usb2: root hub lost power or was reset
- [ 1513.210000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1513.210000] [sw-ohci1]: open clock
- [ 1513.290000] usb usb3: root hub lost power or was reset
- [ 1513.530000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1513.530000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1513.540000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1513.540000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:43
- [ 1513.550000] val = 0x5b,pre_rest_vol = 90,rest_vol = 91
- [ 1513.560000] battery vol change: 90->91
- [ 1513.560000] [AXP]=======================val = 0x0
- [ 1513.570000] pmu_resume_chgcur = 300000
- [ 1513.570000] [audio codec]:resume start
- [ 1513.570000] codec_resume_events,1271
- [ 1513.580000] [audio codec]:resume end
- [ 1513.580000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1513.590000] [mmc_pm]: No sdio card, please check your config !!
- [ 1513.590000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1513.600000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1513.700000] [CSI]csi_resume
- [ 1513.700000] PM: resume of devices complete after 748.636 msecs
- [ 1513.700000] [pm]aw_pm_end!
- [ 1513.710000] PM: Finishing wakeup.
- [ 1513.710000] Restarting tasks ... done.
- [ 1513.750000] suspend: exit suspend, ret = 0 (2012-04-24 21:29:25.566534251 UTC)
- [ 1513.810000] active wake lock unknown_wakeups, time left 500
- [ 1514.240000] ====pa turn on===
- [ 1518.820000] [pm]valid
- [ 1518.820000] PM: Syncing filesystems ... done.
- [ 1518.820000] PM: Preparing system for mem sleep
- [ 1518.830000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1518.860000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1518.880000] PM: Entering mem sleep
- [ 1518.880000] [pm]3 state begin
- [ 1518.880000] [CSI]csi_suspend
- [ 1518.890000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1518.890000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1518.900000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1518.910000] [audio codec]:suspend start5000
- [ 1519.560000] [audio codec]:suspend end
- [ 1519.560000] pmu_suspend_chgcur = 1000000
- [ 1519.570000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.570000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:49
- [ 1519.580000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.580000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:49
- [ 1519.590000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.590000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:49
- [ 1519.600000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.610000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:49
- [ 1519.610000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.620000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:28:49
- [ 1519.620000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1519.630000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1519.630000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1519.640000] [sw-ohci1]: close clock
- [ 1519.640000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1519.650000] [sw-ehci1]: Set USB Power OFF
- [ 1519.650000] [sw-ehci1]: close clock
- [ 1519.660000] [sw_hcd0]: sw_hcd_suspend start
- [ 1519.660000] wrn: hcd is disable, need not enter to suspend
- [ 1519.670000] [sw_udc]: sw_udc_suspend start
- [ 1519.670000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1519.680000] [i2c2] suspend okay..
- [ 1519.680000] [i2c1] suspend okay..
- [ 1519.680000] [NAND] nand_suspend
- [ 1519.690000] [NAND] nand_suspend ok
- [ 1519.690000] [sw_dmac_suspend] enter
- [ 1519.690000] PM: suspend of devices complete after 808.537 msecs
- [ 1519.700000] [pm]prepare
- [ 1519.700000] PM: late suspend of devices complete after 0.259 msecs
- [ 1519.710000] [pm]prepare_late
- [ 1519.710000] [pm]enter state 3
- [ 1519.710000] [pm]platform wakeup, wakesource is:0x10
- [ 1519.720000] PM: early resume of devices complete after 0.156 msecs
- [ 1519.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1519.730000] [pm]platform wakeup finish
- [ 1519.730000] [sw_dmac_resume] enter
- [ 1519.740000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:26
- [ 1519.740000] wakeup wake lock: alarm_rtc
- [ 1519.750000] [NAND] nand_resume
- [ 1519.750000] [NAND] nand gpio_request
- [ 1519.750000] twi1, apb clock = 24000000
- [ 1519.760000] [i2c1] resume okay..
- [ 1519.760000] twi2, apb clock = 24000000
- [ 1519.760000] [i2c2] resume okay..
- [ 1519.770000] [sw_udc]: sw_udc_resume start
- [ 1519.770000] [sw_udc]: udc is disable, need not enter to resume
- [ 1519.780000] [sw_hcd0]: sw_hcd_resume start
- [ 1519.780000] wrn: hcd is disable, need not resume
- [ 1519.810000] wemac wemac.0: resetting device
- [ 1519.810000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1519.820000] [sw-ehci1]: open clock
- [ 1519.840000] [sw-ehci1]: Set USB Power ON
- [ 1519.840000] [sw-ehci1]: lost power, restarting
- [ 1519.850000] usb usb2: root hub lost power or was reset
- [ 1520.000000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1520.000000] [sw-ohci1]: open clock
- [ 1520.080000] usb usb3: root hub lost power or was reset
- [ 1520.320000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1520.320000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1520.330000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1520.330000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:26
- [ 1520.340000] val = 0x5f,pre_rest_vol = 91,rest_vol = 95
- [ 1520.350000] battery vol change: 91->95
- [ 1520.350000] [AXP]=======================val = 0x0
- [ 1520.360000] pmu_resume_chgcur = 300000
- [ 1520.360000] [audio codec]:resume start
- [ 1520.360000] codec_resume_events,1271
- [ 1520.370000] [audio codec]:resume end
- [ 1520.370000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1520.380000] [mmc_pm]: No sdio card, please check your config !!
- [ 1520.380000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1520.390000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1520.490000] [CSI]csi_resume
- [ 1520.490000] PM: resume of devices complete after 756.600 msecs
- [ 1520.490000] [pm]aw_pm_end!
- [ 1520.500000] PM: Finishing wakeup.
- [ 1520.500000] Restarting tasks ... done.
- [ 1520.550000] suspend: exit suspend, ret = 0 (2012-04-24 21:54:08.657755320 UTC)
- [ 1521.030000] ====pa turn on===
- [ 1525.590000] [pm]valid
- [ 1525.590000] PM: Syncing filesystems ... done.
- [ 1525.590000] PM: Preparing system for mem sleep
- [ 1525.600000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1525.630000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1525.650000] PM: Entering mem sleep
- [ 1525.650000] [pm]3 state begin
- [ 1525.650000] [CSI]csi_suspend
- [ 1525.660000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1525.660000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1525.670000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1525.680000] [audio codec]:suspend start5000
- [ 1526.330000] [audio codec]:suspend end
- [ 1526.330000] pmu_suspend_chgcur = 1000000
- [ 1526.340000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.340000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:32
- [ 1526.350000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.350000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:32
- [ 1526.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.360000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:32
- [ 1526.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.370000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:32
- [ 1526.380000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.380000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:53:32
- [ 1526.390000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1526.400000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1526.400000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1526.410000] [sw-ohci1]: close clock
- [ 1526.410000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1526.420000] [sw-ehci1]: Set USB Power OFF
- [ 1526.420000] [sw-ehci1]: close clock
- [ 1526.420000] [sw_hcd0]: sw_hcd_suspend start
- [ 1526.430000] wrn: hcd is disable, need not enter to suspend
- [ 1526.430000] [sw_udc]: sw_udc_suspend start
- [ 1526.440000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1526.440000] [i2c2] suspend okay..
- [ 1526.450000] [i2c1] suspend okay..
- [ 1526.450000] [NAND] nand_suspend
- [ 1526.450000] [NAND] nand_suspend ok
- [ 1526.460000] [sw_dmac_suspend] enter
- [ 1526.460000] PM: suspend of devices complete after 806.433 msecs
- [ 1526.470000] [pm]prepare
- [ 1526.470000] PM: late suspend of devices complete after 0.260 msecs
- [ 1526.480000] [pm]prepare_late
- [ 1526.480000] [pm]enter state 3
- [ 1526.480000] [pm]platform wakeup, wakesource is:0x10
- [ 1526.480000] PM: early resume of devices complete after 0.156 msecs
- [ 1526.490000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1526.500000] [pm]platform wakeup finish
- [ 1526.500000] [sw_dmac_resume] enter
- [ 1526.500000] [NAND] nand_resume
- [ 1526.510000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:43
- [ 1526.510000] wakeup wake lock: alarm_rtc
- [ 1526.520000] [NAND] nand gpio_request
- [ 1526.520000] twi1, apb clock = 24000000
- [ 1526.520000] [i2c1] resume okay..
- [ 1526.530000] twi2, apb clock = 24000000
- [ 1526.530000] [i2c2] resume okay..
- [ 1526.530000] [sw_udc]: sw_udc_resume start
- [ 1526.540000] [sw_udc]: udc is disable, need not enter to resume
- [ 1526.540000] [sw_hcd0]: sw_hcd_resume start
- [ 1526.550000] wrn: hcd is disable, need not resume
- [ 1526.570000] wemac wemac.0: resetting device
- [ 1526.570000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1526.580000] [sw-ehci1]: open clock
- [ 1526.600000] [sw-ehci1]: Set USB Power ON
- [ 1526.600000] [sw-ehci1]: lost power, restarting
- [ 1526.610000] usb usb2: root hub lost power or was reset
- [ 1526.760000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1526.760000] [sw-ohci1]: open clock
- [ 1526.840000] usb usb3: root hub lost power or was reset
- [ 1527.080000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1527.080000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1527.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1527.090000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:43
- [ 1527.100000] val = 0x60,pre_rest_vol = 95,rest_vol = 96
- [ 1527.110000] battery vol change: 95->96
- [ 1527.110000] [AXP]=======================val = 0x0
- [ 1527.120000] pmu_resume_chgcur = 300000
- [ 1527.120000] [audio codec]:resume start
- [ 1527.120000] codec_resume_events,1271
- [ 1527.130000] [audio codec]:resume end
- [ 1527.130000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1527.140000] [mmc_pm]: No sdio card, please check your config !!
- [ 1527.140000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1527.150000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1527.250000] [CSI]csi_resume
- [ 1527.250000] PM: resume of devices complete after 748.594 msecs
- [ 1527.250000] [pm]aw_pm_end!
- [ 1527.260000] PM: Finishing wakeup.
- [ 1527.260000] Restarting tasks ... done.
- [ 1527.290000] suspend: exit suspend, ret = 0 (2012-04-24 21:59:25.706345847 UTC)
- [ 1527.350000] active wake lock unknown_wakeups, time left 500
- [ 1527.790000] ====pa turn on===
- [ 1532.360000] [pm]valid
- [ 1532.360000] PM: Syncing filesystems ... done.
- [ 1532.360000] PM: Preparing system for mem sleep
- [ 1532.370000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1532.400000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1532.420000] PM: Entering mem sleep
- [ 1532.420000] [pm]3 state begin
- [ 1532.420000] [CSI]csi_suspend
- [ 1532.430000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1532.430000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1532.440000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1532.450000] [audio codec]:suspend start5000
- [ 1533.100000] [audio codec]:suspend end
- [ 1533.100000] pmu_suspend_chgcur = 1000000
- [ 1533.110000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.110000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:49
- [ 1533.120000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.120000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:49
- [ 1533.130000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.130000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:49
- [ 1533.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.140000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:49
- [ 1533.150000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.150000] sunxi-rtc sunxi-rtc: read time 2012-4-24 21:58:49
- [ 1533.160000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1533.170000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1533.170000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1533.180000] [sw-ohci1]: close clock
- [ 1533.180000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1533.190000] [sw-ehci1]: Set USB Power OFF
- [ 1533.190000] [sw-ehci1]: close clock
- [ 1533.190000] [sw_hcd0]: sw_hcd_suspend start
- [ 1533.200000] wrn: hcd is disable, need not enter to suspend
- [ 1533.200000] [sw_udc]: sw_udc_suspend start
- [ 1533.210000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1533.210000] [i2c2] suspend okay..
- [ 1533.220000] [i2c1] suspend okay..
- [ 1533.220000] [NAND] nand_suspend
- [ 1533.220000] [NAND] nand_suspend ok
- [ 1533.230000] [sw_dmac_suspend] enter
- [ 1533.230000] PM: suspend of devices complete after 806.409 msecs
- [ 1533.240000] [pm]prepare
- [ 1533.240000] PM: late suspend of devices complete after 0.254 msecs
- [ 1533.250000] [pm]prepare_late
- [ 1533.250000] [pm]enter state 3
- [ 1533.250000] [pm]platform wakeup, wakesource is:0x10
- [ 1533.250000] PM: early resume of devices complete after 0.158 msecs
- [ 1533.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.270000] [pm]platform wakeup finish
- [ 1533.270000] [sw_dmac_resume] enter
- [ 1533.270000] [NAND] nand_resume
- [ 1533.280000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:27
- [ 1533.280000] wakeup wake lock: alarm_rtc
- [ 1533.290000] [NAND] nand gpio_request
- [ 1533.290000] twi1, apb clock = 24000000
- [ 1533.290000] [i2c1] resume okay..
- [ 1533.300000] twi2, apb clock = 24000000
- [ 1533.300000] [i2c2] resume okay..
- [ 1533.300000] [sw_udc]: sw_udc_resume start
- [ 1533.310000] [sw_udc]: udc is disable, need not enter to resume
- [ 1533.310000] [sw_hcd0]: sw_hcd_resume start
- [ 1533.320000] wrn: hcd is disable, need not resume
- [ 1533.340000] wemac wemac.0: resetting device
- [ 1533.340000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1533.350000] [sw-ehci1]: open clock
- [ 1533.370000] [sw-ehci1]: Set USB Power ON
- [ 1533.370000] [sw-ehci1]: lost power, restarting
- [ 1533.380000] usb usb2: root hub lost power or was reset
- [ 1533.530000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1533.530000] [sw-ohci1]: open clock
- [ 1533.610000] usb usb3: root hub lost power or was reset
- [ 1533.850000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1533.850000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1533.860000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1533.860000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:27
- [ 1533.870000] [AXP]battery state change
- [ 1533.880000] charger->usb_valid = 0
- [ 1533.880000] set usb vol-lim to 4000 mV, cur-lim to 0 mA
- [ 1533.890000] val = 0x62,pre_rest_vol = 96,rest_vol = 98
- [ 1533.890000] battery vol change: 96->100
- [ 1533.900000] [AXP]event = 0x400
- [ 1533.900000] [AXP]=======================val = 0x0
- [ 1533.910000] pmu_resume_chgcur = 300000
- [ 1533.910000] [audio codec]:resume start
- [ 1533.910000] codec_resume_events,1271
- [ 1533.920000] [audio codec]:resume end
- [ 1533.920000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1533.930000] [mmc_pm]: No sdio card, please check your config !!
- [ 1533.930000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1533.940000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1534.040000] [CSI]csi_resume
- [ 1534.040000] PM: resume of devices complete after 768.615 msecs
- [ 1534.040000] [pm]aw_pm_end!
- [ 1534.050000] PM: Finishing wakeup.
- [ 1534.050000] Restarting tasks ... done.
- [ 1534.100000] suspend: exit suspend, ret = 0 (2012-04-24 22:24:09.816935401 UTC)
- [ 1534.580000] ====pa turn on===
- [ 1539.200000] [pm]valid
- [ 1539.200000] PM: Syncing filesystems ... done.
- [ 1539.210000] PM: Preparing system for mem sleep
- [ 1539.210000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 1539.240000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1539.260000] PM: Entering mem sleep
- [ 1539.260000] [pm]3 state begin
- [ 1539.260000] [CSI]csi_suspend
- [ 1539.270000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1539.270000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1539.280000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1539.290000] [audio codec]:suspend start5000
- [ 1539.940000] [audio codec]:suspend end
- [ 1539.940000] pmu_suspend_chgcur = 1000000
- [ 1539.950000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1539.950000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:33
- [ 1539.960000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1539.960000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:33
- [ 1539.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1539.970000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:33
- [ 1539.980000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1539.990000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:33
- [ 1539.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1540.000000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:23:33
- [ 1540.000000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1540.010000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1540.010000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1540.020000] [sw-ohci1]: close clock
- [ 1540.020000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1540.030000] [sw-ehci1]: Set USB Power OFF
- [ 1540.030000] [sw-ehci1]: close clock
- [ 1540.040000] [sw_hcd0]: sw_hcd_suspend start
- [ 1540.040000] wrn: hcd is disable, need not enter to suspend
- [ 1540.050000] [sw_udc]: sw_udc_suspend start
- [ 1540.050000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1540.060000] [i2c2] suspend okay..
- [ 1540.060000] [i2c1] suspend okay..
- [ 1540.060000] [NAND] nand_suspend
- [ 1540.070000] [NAND] nand_suspend ok
- [ 1540.070000] [sw_dmac_suspend] enter
- [ 1540.070000] PM: suspend of devices complete after 808.549 msecs
- [ 1540.080000] [pm]prepare
- [ 1540.080000] PM: late suspend of devices complete after 0.255 msecs
- [ 1540.090000] [pm]prepare_late
- [ 1540.090000] [pm]enter state 3
- [ 1540.090000] [pm]platform wakeup, wakesource is:0x10
- [ 1540.100000] PM: early resume of devices complete after 0.157 msecs
- [ 1540.100000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1540.110000] [pm]platform wakeup finish
- [ 1540.110000] [sw_dmac_resume] enter
- [ 1540.120000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:42
- [ 1540.120000] wakeup wake lock: alarm_rtc
- [ 1540.130000] [NAND] nand_resume
- [ 1540.130000] [NAND] nand gpio_request
- [ 1540.130000] twi1, apb clock = 24000000
- [ 1540.140000] [i2c1] resume okay..
- [ 1540.140000] twi2, apb clock = 24000000
- [ 1540.140000] [i2c2] resume okay..
- [ 1540.150000] [sw_udc]: sw_udc_resume start
- [ 1540.150000] [sw_udc]: udc is disable, need not enter to resume
- [ 1540.160000] [sw_hcd0]: sw_hcd_resume start
- [ 1540.160000] wrn: hcd is disable, need not resume
- [ 1540.190000] wemac wemac.0: resetting device
- [ 1540.190000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1540.200000] [sw-ehci1]: open clock
- [ 1540.220000] [sw-ehci1]: Set USB Power ON
- [ 1540.220000] [sw-ehci1]: lost power, restarting
- [ 1540.230000] usb usb2: root hub lost power or was reset
- [ 1540.380000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1540.380000] [sw-ohci1]: open clock
- [ 1540.460000] usb usb3: root hub lost power or was reset
- [ 1540.700000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1540.700000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1540.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1540.710000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:42
- [ 1540.720000] val = 0x62,pre_rest_vol = 99,rest_vol = 99
- [ 1540.730000] battery vol change: 99->100
- [ 1540.730000] [AXP]=======================val = 0x0
- [ 1540.740000] pmu_resume_chgcur = 300000
- [ 1540.740000] [audio codec]:resume start
- [ 1540.740000] codec_resume_events,1271
- [ 1540.750000] [audio codec]:resume end
- [ 1540.750000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1540.760000] [mmc_pm]: No sdio card, please check your config !!
- [ 1540.760000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1540.770000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1540.870000] [CSI]csi_resume
- [ 1540.870000] PM: resume of devices complete after 756.594 msecs
- [ 1540.870000] [pm]aw_pm_end!
- [ 1540.880000] PM: Finishing wakeup.
- [ 1540.880000] Restarting tasks ... done.
- [ 1540.910000] suspend: exit suspend, ret = 0 (2012-04-24 22:29:24.917924665 UTC)
- [ 1540.960000] active wake lock unknown_wakeups, time left 500
- [ 1541.410000] ====pa turn on===
- [ 1545.970000] [pm]valid
- [ 1545.970000] PM: Syncing filesystems ... done.
- [ 1545.970000] PM: Preparing system for mem sleep
- [ 1545.980000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1546.010000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1546.030000] PM: Entering mem sleep
- [ 1546.030000] [pm]3 state begin
- [ 1546.030000] [CSI]csi_suspend
- [ 1546.040000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1546.040000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1546.050000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1546.060000] [audio codec]:suspend start5000
- [ 1546.710000] [audio codec]:suspend end
- [ 1546.710000] pmu_suspend_chgcur = 1000000
- [ 1546.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.720000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:48
- [ 1546.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.730000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:48
- [ 1546.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.740000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:48
- [ 1546.750000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.750000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:48
- [ 1546.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.760000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:28:48
- [ 1546.770000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1546.780000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1546.780000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1546.790000] [sw-ohci1]: close clock
- [ 1546.790000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1546.800000] [sw-ehci1]: Set USB Power OFF
- [ 1546.800000] [sw-ehci1]: close clock
- [ 1546.800000] [sw_hcd0]: sw_hcd_suspend start
- [ 1546.810000] wrn: hcd is disable, need not enter to suspend
- [ 1546.810000] [sw_udc]: sw_udc_suspend start
- [ 1546.820000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1546.820000] [i2c2] suspend okay..
- [ 1546.830000] [i2c1] suspend okay..
- [ 1546.830000] [NAND] nand_suspend
- [ 1546.830000] [NAND] nand_suspend ok
- [ 1546.840000] [sw_dmac_suspend] enter
- [ 1546.840000] PM: suspend of devices complete after 806.415 msecs
- [ 1546.850000] [pm]prepare
- [ 1546.850000] PM: late suspend of devices complete after 0.257 msecs
- [ 1546.860000] [pm]prepare_late
- [ 1546.860000] [pm]enter state 3
- [ 1546.860000] [pm]platform wakeup, wakesource is:0x10
- [ 1546.860000] PM: early resume of devices complete after 0.154 msecs
- [ 1546.870000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1546.880000] [pm]platform wakeup finish
- [ 1546.880000] [sw_dmac_resume] enter
- [ 1546.880000] [NAND] nand_resume
- [ 1546.890000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:28
- [ 1546.890000] wakeup wake lock: alarm_rtc
- [ 1546.900000] [NAND] nand gpio_request
- [ 1546.900000] twi1, apb clock = 24000000
- [ 1546.900000] [i2c1] resume okay..
- [ 1546.910000] twi2, apb clock = 24000000
- [ 1546.910000] [i2c2] resume okay..
- [ 1546.910000] [sw_udc]: sw_udc_resume start
- [ 1546.920000] [sw_udc]: udc is disable, need not enter to resume
- [ 1546.920000] [sw_hcd0]: sw_hcd_resume start
- [ 1546.930000] wrn: hcd is disable, need not resume
- [ 1546.950000] wemac wemac.0: resetting device
- [ 1546.950000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1546.960000] [sw-ehci1]: open clock
- [ 1546.980000] [sw-ehci1]: Set USB Power ON
- [ 1546.980000] [sw-ehci1]: lost power, restarting
- [ 1546.990000] usb usb2: root hub lost power or was reset
- [ 1547.140000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1547.140000] [sw-ohci1]: open clock
- [ 1547.220000] usb usb3: root hub lost power or was reset
- [ 1547.460000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1547.460000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1547.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1547.470000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:28
- [ 1547.480000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1547.490000] battery vol change: 99->100
- [ 1547.490000] [AXP]=======================val = 0x0
- [ 1547.500000] pmu_resume_chgcur = 300000
- [ 1547.500000] [audio codec]:resume start
- [ 1547.500000] codec_resume_events,1271
- [ 1547.510000] [audio codec]:resume end
- [ 1547.510000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1547.520000] [mmc_pm]: No sdio card, please check your config !!
- [ 1547.520000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1547.530000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1547.630000] [CSI]csi_resume
- [ 1547.630000] PM: resume of devices complete after 748.628 msecs
- [ 1547.630000] [pm]aw_pm_end!
- [ 1547.640000] PM: Finishing wakeup.
- [ 1547.640000] Restarting tasks ... done.
- [ 1547.680000] suspend: exit suspend, ret = 0 (2012-04-24 22:54:10.991417259 UTC)
- [ 1548.170000] ====pa turn on===
- [ 1552.800000] [pm]valid
- [ 1552.800000] PM: Syncing filesystems ... done.
- [ 1552.810000] PM: Preparing system for mem sleep
- [ 1552.810000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 1552.840000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1552.860000] PM: Entering mem sleep
- [ 1552.860000] [pm]3 state begin
- [ 1552.860000] [CSI]csi_suspend
- [ 1552.870000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1552.870000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1552.880000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1552.890000] [audio codec]:suspend start5000
- [ 1553.540000] [audio codec]:suspend end
- [ 1553.540000] pmu_suspend_chgcur = 1000000
- [ 1553.550000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.550000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:34
- [ 1553.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.560000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:34
- [ 1553.570000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.570000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:34
- [ 1553.580000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.580000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:34
- [ 1553.590000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.590000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:53:34
- [ 1553.600000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1553.610000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1553.610000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1553.620000] [sw-ohci1]: close clock
- [ 1553.620000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1553.620000] [sw-ehci1]: Set USB Power OFF
- [ 1553.630000] [sw-ehci1]: close clock
- [ 1553.630000] [sw_hcd0]: sw_hcd_suspend start
- [ 1553.640000] wrn: hcd is disable, need not enter to suspend
- [ 1553.640000] [sw_udc]: sw_udc_suspend start
- [ 1553.650000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1553.650000] [i2c2] suspend okay..
- [ 1553.660000] [i2c1] suspend okay..
- [ 1553.660000] [NAND] nand_suspend
- [ 1553.660000] [NAND] nand_suspend ok
- [ 1553.670000] [sw_dmac_suspend] enter
- [ 1553.670000] PM: suspend of devices complete after 806.977 msecs
- [ 1553.680000] [pm]prepare
- [ 1553.680000] PM: late suspend of devices complete after 0.257 msecs
- [ 1553.690000] [pm]prepare_late
- [ 1553.690000] [pm]enter state 3
- [ 1553.690000] [pm]platform wakeup, wakesource is:0x10
- [ 1553.690000] PM: early resume of devices complete after 0.153 msecs
- [ 1553.700000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1553.710000] [pm]platform wakeup finish
- [ 1553.710000] [sw_dmac_resume] enter
- [ 1553.710000] [NAND] nand_resume
- [ 1553.720000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:42
- [ 1553.720000] wakeup wake lock: alarm_rtc
- [ 1553.730000] [NAND] nand gpio_request
- [ 1553.730000] twi1, apb clock = 24000000
- [ 1553.730000] [i2c1] resume okay..
- [ 1553.740000] twi2, apb clock = 24000000
- [ 1553.740000] [i2c2] resume okay..
- [ 1553.750000] [sw_udc]: sw_udc_resume start
- [ 1553.750000] [sw_udc]: udc is disable, need not enter to resume
- [ 1553.760000] [sw_hcd0]: sw_hcd_resume start
- [ 1553.760000] wrn: hcd is disable, need not resume
- [ 1553.780000] wemac wemac.0: resetting device
- [ 1553.780000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1553.790000] [sw-ehci1]: open clock
- [ 1553.810000] [sw-ehci1]: Set USB Power ON
- [ 1553.810000] [sw-ehci1]: lost power, restarting
- [ 1553.820000] usb usb2: root hub lost power or was reset
- [ 1553.970000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1553.970000] [sw-ohci1]: open clock
- [ 1554.050000] usb usb3: root hub lost power or was reset
- [ 1554.290000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1554.290000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1554.300000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1554.300000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:42
- [ 1554.310000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1554.320000] battery vol change: 99->100
- [ 1554.320000] [AXP]=======================val = 0x0
- [ 1554.330000] pmu_resume_chgcur = 300000
- [ 1554.330000] [audio codec]:resume start
- [ 1554.330000] codec_resume_events,1271
- [ 1554.340000] [audio codec]:resume end
- [ 1554.340000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1554.350000] [mmc_pm]: No sdio card, please check your config !!
- [ 1554.350000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1554.360000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1554.460000] [CSI]csi_resume
- [ 1554.460000] PM: resume of devices complete after 748.183 msecs
- [ 1554.460000] [pm]aw_pm_end!
- [ 1554.470000] PM: Finishing wakeup.
- [ 1554.470000] Restarting tasks ... done.
- [ 1554.510000] suspend: exit suspend, ret = 0 (2012-04-24 22:59:25.122555058 UTC)
- [ 1554.570000] active wake lock unknown_wakeups, time left 500
- [ 1555.000000] ====pa turn on===
- [ 1559.580000] [pm]valid
- [ 1559.580000] PM: Syncing filesystems ... done.
- [ 1559.580000] PM: Preparing system for mem sleep
- [ 1559.590000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1559.620000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1559.640000] PM: Entering mem sleep
- [ 1559.640000] [pm]3 state begin
- [ 1559.640000] [CSI]csi_suspend
- [ 1559.650000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1559.650000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1559.660000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1559.670000] [audio codec]:suspend start5000
- [ 1560.320000] [audio codec]:suspend end
- [ 1560.320000] pmu_suspend_chgcur = 1000000
- [ 1560.330000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.330000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:48
- [ 1560.340000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.340000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:48
- [ 1560.350000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.360000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:48
- [ 1560.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.370000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:48
- [ 1560.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.380000] sunxi-rtc sunxi-rtc: read time 2012-4-24 22:58:48
- [ 1560.380000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1560.390000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1560.390000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1560.400000] [sw-ohci1]: close clock
- [ 1560.400000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1560.410000] [sw-ehci1]: Set USB Power OFF
- [ 1560.410000] [sw-ehci1]: close clock
- [ 1560.420000] [sw_hcd0]: sw_hcd_suspend start
- [ 1560.420000] wrn: hcd is disable, need not enter to suspend
- [ 1560.430000] [sw_udc]: sw_udc_suspend start
- [ 1560.430000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1560.440000] [i2c2] suspend okay..
- [ 1560.440000] [i2c1] suspend okay..
- [ 1560.440000] [NAND] nand_suspend
- [ 1560.450000] [NAND] nand_suspend ok
- [ 1560.450000] [sw_dmac_suspend] enter
- [ 1560.450000] PM: suspend of devices complete after 808.517 msecs
- [ 1560.460000] [pm]prepare
- [ 1560.460000] PM: late suspend of devices complete after 0.259 msecs
- [ 1560.470000] [pm]prepare_late
- [ 1560.470000] [pm]enter state 3
- [ 1560.470000] [pm]platform wakeup, wakesource is:0x10
- [ 1560.480000] PM: early resume of devices complete after 0.157 msecs
- [ 1560.480000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1560.490000] [pm]platform wakeup finish
- [ 1560.490000] [sw_dmac_resume] enter
- [ 1560.500000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:29
- [ 1560.500000] wakeup wake lock: alarm_rtc
- [ 1560.510000] [NAND] nand_resume
- [ 1560.510000] [NAND] nand gpio_request
- [ 1560.510000] twi1, apb clock = 24000000
- [ 1560.520000] [i2c1] resume okay..
- [ 1560.520000] twi2, apb clock = 24000000
- [ 1560.520000] [i2c2] resume okay..
- [ 1560.530000] [sw_udc]: sw_udc_resume start
- [ 1560.530000] [sw_udc]: udc is disable, need not enter to resume
- [ 1560.540000] [sw_hcd0]: sw_hcd_resume start
- [ 1560.540000] wrn: hcd is disable, need not resume
- [ 1560.570000] wemac wemac.0: resetting device
- [ 1560.570000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1560.580000] [sw-ehci1]: open clock
- [ 1560.600000] [sw-ehci1]: Set USB Power ON
- [ 1560.600000] [sw-ehci1]: lost power, restarting
- [ 1560.610000] usb usb2: root hub lost power or was reset
- [ 1560.760000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1560.760000] [sw-ohci1]: open clock
- [ 1560.840000] usb usb3: root hub lost power or was reset
- [ 1561.080000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1561.080000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1561.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1561.090000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:29
- [ 1561.100000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1561.110000] battery vol change: 99->100
- [ 1561.110000] [AXP]=======================val = 0x0
- [ 1561.120000] pmu_resume_chgcur = 300000
- [ 1561.120000] [audio codec]:resume start
- [ 1561.120000] codec_resume_events,1271
- [ 1561.130000] [audio codec]:resume end
- [ 1561.130000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1561.140000] [mmc_pm]: No sdio card, please check your config !!
- [ 1561.140000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1561.150000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1561.250000] [CSI]csi_resume
- [ 1561.250000] PM: resume of devices complete after 756.570 msecs
- [ 1561.250000] [pm]aw_pm_end!
- [ 1561.260000] PM: Finishing wakeup.
- [ 1561.260000] Restarting tasks ... done.
- [ 1561.320000] suspend: exit suspend, ret = 0 (2012-04-24 23:24:12.232679720 UTC)
- [ 1561.790000] ====pa turn on===
- [ 1566.380000] [pm]valid
- [ 1566.390000] PM: Syncing filesystems ... done.
- [ 1566.390000] PM: Preparing system for mem sleep
- [ 1566.400000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1566.430000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1566.450000] PM: Entering mem sleep
- [ 1566.450000] [pm]3 state begin
- [ 1566.450000] [CSI]csi_suspend
- [ 1566.460000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1566.460000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1566.470000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1566.480000] [audio codec]:suspend start5000
- [ 1567.130000] [audio codec]:suspend end
- [ 1567.130000] pmu_suspend_chgcur = 1000000
- [ 1567.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.140000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:35
- [ 1567.150000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.150000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:35
- [ 1567.160000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.160000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:35
- [ 1567.170000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.170000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:35
- [ 1567.180000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.180000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:23:35
- [ 1567.190000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1567.200000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1567.200000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1567.210000] [sw-ohci1]: close clock
- [ 1567.210000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1567.220000] [sw-ehci1]: Set USB Power OFF
- [ 1567.220000] [sw-ehci1]: close clock
- [ 1567.220000] [sw_hcd0]: sw_hcd_suspend start
- [ 1567.230000] wrn: hcd is disable, need not enter to suspend
- [ 1567.230000] [sw_udc]: sw_udc_suspend start
- [ 1567.240000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1567.240000] [i2c2] suspend okay..
- [ 1567.250000] [i2c1] suspend okay..
- [ 1567.250000] [NAND] nand_suspend
- [ 1567.250000] [NAND] nand_suspend ok
- [ 1567.260000] [sw_dmac_suspend] enter
- [ 1567.260000] PM: suspend of devices complete after 806.391 msecs
- [ 1567.270000] [pm]prepare
- [ 1567.270000] PM: late suspend of devices complete after 0.256 msecs
- [ 1567.280000] [pm]prepare_late
- [ 1567.280000] [pm]enter state 3
- [ 1567.280000] [pm]platform wakeup, wakesource is:0x10
- [ 1567.280000] PM: early resume of devices complete after 0.154 msecs
- [ 1567.290000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.300000] [pm]platform wakeup finish
- [ 1567.300000] [sw_dmac_resume] enter
- [ 1567.300000] [NAND] nand_resume
- [ 1567.310000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:42
- [ 1567.310000] wakeup wake lock: alarm_rtc
- [ 1567.320000] [NAND] nand gpio_request
- [ 1567.320000] twi1, apb clock = 24000000
- [ 1567.320000] [i2c1] resume okay..
- [ 1567.330000] twi2, apb clock = 24000000
- [ 1567.330000] [i2c2] resume okay..
- [ 1567.330000] [sw_udc]: sw_udc_resume start
- [ 1567.340000] [sw_udc]: udc is disable, need not enter to resume
- [ 1567.340000] [sw_hcd0]: sw_hcd_resume start
- [ 1567.350000] wrn: hcd is disable, need not resume
- [ 1567.370000] wemac wemac.0: resetting device
- [ 1567.370000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1567.380000] [sw-ehci1]: open clock
- [ 1567.400000] [sw-ehci1]: Set USB Power ON
- [ 1567.400000] [sw-ehci1]: lost power, restarting
- [ 1567.410000] usb usb2: root hub lost power or was reset
- [ 1567.560000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1567.560000] [sw-ohci1]: open clock
- [ 1567.640000] usb usb3: root hub lost power or was reset
- [ 1567.880000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1567.880000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1567.890000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1567.890000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:42
- [ 1567.900000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1567.910000] battery vol change: 99->100
- [ 1567.910000] [AXP]=======================val = 0x0
- [ 1567.920000] pmu_resume_chgcur = 300000
- [ 1567.920000] [audio codec]:resume start
- [ 1567.920000] codec_resume_events,1271
- [ 1567.930000] [audio codec]:resume end
- [ 1567.930000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1567.940000] [mmc_pm]: No sdio card, please check your config !!
- [ 1567.940000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1567.950000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1568.050000] [CSI]csi_resume
- [ 1568.050000] PM: resume of devices complete after 748.634 msecs
- [ 1568.050000] [pm]aw_pm_end!
- [ 1568.060000] PM: Finishing wakeup.
- [ 1568.060000] Restarting tasks ... done.
- [ 1568.090000] suspend: exit suspend, ret = 0 (2012-04-24 23:29:25.297402494 UTC)
- [ 1568.590000] ====pa turn on===
- [ 1573.100000] [pm]valid
- [ 1573.100000] PM: Syncing filesystems ... done.
- [ 1573.100000] PM: Preparing system for mem sleep
- [ 1573.110000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1573.140000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1573.160000] PM: Entering mem sleep
- [ 1573.160000] [pm]3 state begin
- [ 1573.160000] [CSI]csi_suspend
- [ 1573.170000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1573.170000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1573.180000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1573.190000] [audio codec]:suspend start5000
- [ 1573.840000] [audio codec]:suspend end
- [ 1573.840000] pmu_suspend_chgcur = 1000000
- [ 1573.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1573.850000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:48
- [ 1573.860000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1573.860000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:48
- [ 1573.870000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1573.870000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:48
- [ 1573.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1573.890000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:48
- [ 1573.890000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1573.900000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:28:48
- [ 1573.900000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1573.910000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1573.910000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1573.920000] [sw-ohci1]: close clock
- [ 1573.920000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1573.930000] [sw-ehci1]: Set USB Power OFF
- [ 1573.930000] [sw-ehci1]: close clock
- [ 1573.940000] [sw_hcd0]: sw_hcd_suspend start
- [ 1573.940000] wrn: hcd is disable, need not enter to suspend
- [ 1573.950000] [sw_udc]: sw_udc_suspend start
- [ 1573.950000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1573.960000] [i2c2] suspend okay..
- [ 1573.960000] [i2c1] suspend okay..
- [ 1573.960000] [NAND] nand_suspend
- [ 1573.970000] [NAND] nand_suspend ok
- [ 1573.970000] [sw_dmac_suspend] enter
- [ 1573.970000] PM: suspend of devices complete after 808.544 msecs
- [ 1573.980000] [pm]prepare
- [ 1573.980000] PM: late suspend of devices complete after 0.254 msecs
- [ 1573.990000] [pm]prepare_late
- [ 1573.990000] [pm]enter state 3
- [ 1573.990000] [pm]platform wakeup, wakesource is:0x10
- [ 1574.000000] PM: early resume of devices complete after 0.153 msecs
- [ 1574.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1574.010000] [pm]platform wakeup finish
- [ 1574.010000] [sw_dmac_resume] enter
- [ 1574.020000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:30
- [ 1574.020000] wakeup wake lock: alarm_rtc
- [ 1574.030000] [NAND] nand_resume
- [ 1574.030000] [NAND] nand gpio_request
- [ 1574.030000] twi1, apb clock = 24000000
- [ 1574.040000] [i2c1] resume okay..
- [ 1574.040000] twi2, apb clock = 24000000
- [ 1574.040000] [i2c2] resume okay..
- [ 1574.050000] [sw_udc]: sw_udc_resume start
- [ 1574.050000] [sw_udc]: udc is disable, need not enter to resume
- [ 1574.060000] [sw_hcd0]: sw_hcd_resume start
- [ 1574.060000] wrn: hcd is disable, need not resume
- [ 1574.090000] wemac wemac.0: resetting device
- [ 1574.090000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1574.100000] [sw-ehci1]: open clock
- [ 1574.120000] [sw-ehci1]: Set USB Power ON
- [ 1574.120000] [sw-ehci1]: lost power, restarting
- [ 1574.130000] usb usb2: root hub lost power or was reset
- [ 1574.280000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1574.280000] [sw-ohci1]: open clock
- [ 1574.360000] usb usb3: root hub lost power or was reset
- [ 1574.600000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1574.600000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1574.610000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1574.610000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:30
- [ 1574.620000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1574.630000] battery vol change: 99->100
- [ 1574.630000] [AXP]=======================val = 0x0
- [ 1574.640000] pmu_resume_chgcur = 300000
- [ 1574.640000] [audio codec]:resume start
- [ 1574.640000] codec_resume_events,1271
- [ 1574.650000] [audio codec]:resume end
- [ 1574.650000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1574.660000] [mmc_pm]: No sdio card, please check your config !!
- [ 1574.660000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1574.670000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1574.770000] [CSI]csi_resume
- [ 1574.770000] PM: resume of devices complete after 756.578 msecs
- [ 1574.770000] [pm]aw_pm_end!
- [ 1574.780000] PM: Finishing wakeup.
- [ 1574.780000] Restarting tasks ... done.
- [ 1574.840000] suspend: exit suspend, ret = 0 (2012-04-24 23:54:13.344908298 UTC)
- [ 1575.310000] ====pa turn on===
- [ 1579.950000] [pm]valid
- [ 1579.950000] PM: Syncing filesystems ... done.
- [ 1579.950000] PM: Preparing system for mem sleep
- [ 1579.960000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1579.990000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1580.010000] PM: Entering mem sleep
- [ 1580.010000] [pm]3 state begin
- [ 1580.010000] [CSI]csi_suspend
- [ 1580.020000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1580.020000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1580.030000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1580.040000] [audio codec]:suspend start5000
- [ 1580.690000] [audio codec]:suspend end
- [ 1580.690000] pmu_suspend_chgcur = 1000000
- [ 1580.700000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.700000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:36
- [ 1580.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.710000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:36
- [ 1580.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.720000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:36
- [ 1580.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.730000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:36
- [ 1580.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.740000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:53:36
- [ 1580.750000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1580.760000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1580.760000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1580.770000] [sw-ohci1]: close clock
- [ 1580.770000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1580.780000] [sw-ehci1]: Set USB Power OFF
- [ 1580.780000] [sw-ehci1]: close clock
- [ 1580.780000] [sw_hcd0]: sw_hcd_suspend start
- [ 1580.790000] wrn: hcd is disable, need not enter to suspend
- [ 1580.790000] [sw_udc]: sw_udc_suspend start
- [ 1580.800000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1580.800000] [i2c2] suspend okay..
- [ 1580.810000] [i2c1] suspend okay..
- [ 1580.810000] [NAND] nand_suspend
- [ 1580.810000] [NAND] nand_suspend ok
- [ 1580.820000] [sw_dmac_suspend] enter
- [ 1580.820000] PM: suspend of devices complete after 806.397 msecs
- [ 1580.830000] [pm]prepare
- [ 1580.830000] PM: late suspend of devices complete after 0.258 msecs
- [ 1580.840000] [pm]prepare_late
- [ 1580.840000] [pm]enter state 3
- [ 1580.840000] [pm]platform wakeup, wakesource is:0x10
- [ 1580.840000] PM: early resume of devices complete after 0.155 msecs
- [ 1580.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1580.860000] [pm]platform wakeup finish
- [ 1580.860000] [sw_dmac_resume] enter
- [ 1580.860000] [NAND] nand_resume
- [ 1580.870000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:42
- [ 1580.870000] wakeup wake lock: alarm_rtc
- [ 1580.880000] [NAND] nand gpio_request
- [ 1580.880000] twi1, apb clock = 24000000
- [ 1580.880000] [i2c1] resume okay..
- [ 1580.890000] twi2, apb clock = 24000000
- [ 1580.890000] [i2c2] resume okay..
- [ 1580.890000] [sw_udc]: sw_udc_resume start
- [ 1580.900000] [sw_udc]: udc is disable, need not enter to resume
- [ 1580.900000] [sw_hcd0]: sw_hcd_resume start
- [ 1580.910000] wrn: hcd is disable, need not resume
- [ 1580.930000] wemac wemac.0: resetting device
- [ 1580.930000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1580.940000] [sw-ehci1]: open clock
- [ 1580.960000] [sw-ehci1]: Set USB Power ON
- [ 1580.960000] [sw-ehci1]: lost power, restarting
- [ 1580.970000] usb usb2: root hub lost power or was reset
- [ 1581.120000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1581.120000] [sw-ohci1]: open clock
- [ 1581.200000] usb usb3: root hub lost power or was reset
- [ 1581.440000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1581.440000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1581.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1581.450000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:42
- [ 1581.460000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1581.470000] battery vol change: 99->100
- [ 1581.470000] [AXP]=======================val = 0x0
- [ 1581.480000] pmu_resume_chgcur = 300000
- [ 1581.480000] [audio codec]:resume start
- [ 1581.480000] codec_resume_events,1271
- [ 1581.490000] [audio codec]:resume end
- [ 1581.490000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1581.500000] [mmc_pm]: No sdio card, please check your config !!
- [ 1581.500000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1581.510000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1581.610000] [CSI]csi_resume
- [ 1581.610000] PM: resume of devices complete after 748.639 msecs
- [ 1581.610000] [pm]aw_pm_end!
- [ 1581.620000] PM: Finishing wakeup.
- [ 1581.620000] Restarting tasks ... done.
- [ 1581.670000] suspend: exit suspend, ret = 0 (2012-04-24 23:59:25.476888645 UTC)
- [ 1581.710000] active wake lock unknown_wakeups, time left 500
- [ 1582.150000] ====pa turn on===
- [ 1586.720000] [pm]valid
- [ 1586.720000] PM: Syncing filesystems ... done.
- [ 1586.720000] PM: Preparing system for mem sleep
- [ 1586.730000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1586.760000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1586.780000] PM: Entering mem sleep
- [ 1586.780000] [pm]3 state begin
- [ 1586.780000] [CSI]csi_suspend
- [ 1586.790000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1586.790000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1586.800000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1586.810000] [audio codec]:suspend start5000
- [ 1587.460000] [audio codec]:suspend end
- [ 1587.460000] pmu_suspend_chgcur = 1000000
- [ 1587.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.470000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:48
- [ 1587.480000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.480000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:48
- [ 1587.490000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.490000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:48
- [ 1587.500000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.500000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:48
- [ 1587.510000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.510000] sunxi-rtc sunxi-rtc: read time 2012-4-24 23:58:48
- [ 1587.520000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1587.530000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1587.530000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1587.540000] [sw-ohci1]: close clock
- [ 1587.540000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1587.550000] [sw-ehci1]: Set USB Power OFF
- [ 1587.550000] [sw-ehci1]: close clock
- [ 1587.550000] [sw_hcd0]: sw_hcd_suspend start
- [ 1587.560000] wrn: hcd is disable, need not enter to suspend
- [ 1587.560000] [sw_udc]: sw_udc_suspend start
- [ 1587.570000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1587.570000] [i2c2] suspend okay..
- [ 1587.580000] [i2c1] suspend okay..
- [ 1587.580000] [NAND] nand_suspend
- [ 1587.580000] [NAND] nand_suspend ok
- [ 1587.590000] [sw_dmac_suspend] enter
- [ 1587.590000] PM: suspend of devices complete after 806.356 msecs
- [ 1587.600000] [pm]prepare
- [ 1587.600000] PM: late suspend of devices complete after 0.252 msecs
- [ 1587.610000] [pm]prepare_late
- [ 1587.610000] [pm]enter state 3
- [ 1587.610000] [pm]platform wakeup, wakesource is:0x10
- [ 1587.610000] PM: early resume of devices complete after 0.154 msecs
- [ 1587.620000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1587.630000] [pm]platform wakeup finish
- [ 1587.630000] [sw_dmac_resume] enter
- [ 1587.630000] [NAND] nand_resume
- [ 1587.640000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:31
- [ 1587.640000] wakeup wake lock: alarm_rtc
- [ 1587.650000] [NAND] nand gpio_request
- [ 1587.650000] twi1, apb clock = 24000000
- [ 1587.650000] [i2c1] resume okay..
- [ 1587.660000] twi2, apb clock = 24000000
- [ 1587.660000] [i2c2] resume okay..
- [ 1587.660000] [sw_udc]: sw_udc_resume start
- [ 1587.670000] [sw_udc]: udc is disable, need not enter to resume
- [ 1587.670000] [sw_hcd0]: sw_hcd_resume start
- [ 1587.680000] wrn: hcd is disable, need not resume
- [ 1587.700000] wemac wemac.0: resetting device
- [ 1587.700000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1587.710000] [sw-ehci1]: open clock
- [ 1587.730000] [sw-ehci1]: Set USB Power ON
- [ 1587.730000] [sw-ehci1]: lost power, restarting
- [ 1587.740000] usb usb2: root hub lost power or was reset
- [ 1587.890000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1587.890000] [sw-ohci1]: open clock
- [ 1587.970000] usb usb3: root hub lost power or was reset
- [ 1588.210000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1588.210000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1588.220000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1588.220000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:31
- [ 1588.230000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1588.240000] battery vol change: 99->100
- [ 1588.240000] [AXP]=======================val = 0x0
- [ 1588.250000] pmu_resume_chgcur = 300000
- [ 1588.250000] [audio codec]:resume start
- [ 1588.250000] codec_resume_events,1271
- [ 1588.260000] [audio codec]:resume end
- [ 1588.260000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1588.270000] [mmc_pm]: No sdio card, please check your config !!
- [ 1588.270000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1588.280000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1588.380000] [CSI]csi_resume
- [ 1588.380000] PM: resume of devices complete after 748.658 msecs
- [ 1588.380000] [pm]aw_pm_end!
- [ 1588.390000] PM: Finishing wakeup.
- [ 1588.390000] Restarting tasks ... done.
- [ 1588.450000] suspend: exit suspend, ret = 0 (2012-04-25 00:24:14.554381070 UTC)
- [ 1588.920000] ====pa turn on===
- [ 1593.480000] [pm]valid
- [ 1593.490000] PM: Syncing filesystems ... done.
- [ 1593.490000] PM: Preparing system for mem sleep
- [ 1593.500000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1593.530000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1593.550000] PM: Entering mem sleep
- [ 1593.550000] [pm]3 state begin
- [ 1593.550000] [CSI]csi_suspend
- [ 1593.560000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1593.560000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1593.570000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1593.580000] [audio codec]:suspend start5000
- [ 1594.230000] [audio codec]:suspend end
- [ 1594.230000] pmu_suspend_chgcur = 1000000
- [ 1594.240000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.240000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:37
- [ 1594.250000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.250000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:37
- [ 1594.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.260000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:37
- [ 1594.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.280000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:37
- [ 1594.280000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.290000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:23:37
- [ 1594.290000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1594.300000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1594.300000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1594.310000] [sw-ohci1]: close clock
- [ 1594.310000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1594.320000] [sw-ehci1]: Set USB Power OFF
- [ 1594.320000] [sw-ehci1]: close clock
- [ 1594.330000] [sw_hcd0]: sw_hcd_suspend start
- [ 1594.330000] wrn: hcd is disable, need not enter to suspend
- [ 1594.330000] [sw_udc]: sw_udc_suspend start
- [ 1594.340000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1594.350000] [i2c2] suspend okay..
- [ 1594.350000] [i2c1] suspend okay..
- [ 1594.350000] [NAND] nand_suspend
- [ 1594.360000] [NAND] nand_suspend ok
- [ 1594.360000] [sw_dmac_suspend] enter
- [ 1594.360000] PM: suspend of devices complete after 807.560 msecs
- [ 1594.370000] [pm]prepare
- [ 1594.370000] PM: late suspend of devices complete after 0.261 msecs
- [ 1594.380000] [pm]prepare_late
- [ 1594.380000] [pm]enter state 3
- [ 1594.380000] [pm]platform wakeup, wakesource is:0x10
- [ 1594.390000] PM: early resume of devices complete after 0.155 msecs
- [ 1594.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.400000] [pm]platform wakeup finish
- [ 1594.400000] [sw_dmac_resume] enter
- [ 1594.410000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:42
- [ 1594.410000] wakeup wake lock: alarm_rtc
- [ 1594.410000] [NAND] nand_resume
- [ 1594.420000] [NAND] nand gpio_request
- [ 1594.420000] twi1, apb clock = 24000000
- [ 1594.430000] [i2c1] resume okay..
- [ 1594.430000] twi2, apb clock = 24000000
- [ 1594.430000] [i2c2] resume okay..
- [ 1594.440000] [sw_udc]: sw_udc_resume start
- [ 1594.440000] [sw_udc]: udc is disable, need not enter to resume
- [ 1594.450000] [sw_hcd0]: sw_hcd_resume start
- [ 1594.450000] wrn: hcd is disable, need not resume
- [ 1594.470000] wemac wemac.0: resetting device
- [ 1594.470000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1594.480000] [sw-ehci1]: open clock
- [ 1594.500000] [sw-ehci1]: Set USB Power ON
- [ 1594.500000] [sw-ehci1]: lost power, restarting
- [ 1594.510000] usb usb2: root hub lost power or was reset
- [ 1594.660000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1594.660000] [sw-ohci1]: open clock
- [ 1594.740000] usb usb3: root hub lost power or was reset
- [ 1594.980000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1594.980000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1594.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1594.990000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:42
- [ 1595.000000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1595.010000] battery vol change: 99->100
- [ 1595.010000] [AXP]=======================val = 0x0
- [ 1595.020000] pmu_resume_chgcur = 300000
- [ 1595.020000] [audio codec]:resume start
- [ 1595.020000] codec_resume_events,1271
- [ 1595.030000] [audio codec]:resume end
- [ 1595.030000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1595.040000] [mmc_pm]: No sdio card, please check your config !!
- [ 1595.040000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1595.050000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1595.150000] [CSI]csi_resume
- [ 1595.150000] PM: resume of devices complete after 747.554 msecs
- [ 1595.150000] [pm]aw_pm_end!
- [ 1595.160000] PM: Finishing wakeup.
- [ 1595.160000] Restarting tasks ... done.
- [ 1595.210000] suspend: exit suspend, ret = 0 (2012-04-25 00:29:25.621382033 UTC)
- [ 1595.250000] active wake lock unknown_wakeups, time left 500
- [ 1595.690000] ====pa turn on===
- [ 1600.260000] [pm]valid
- [ 1600.260000] PM: Syncing filesystems ... done.
- [ 1600.260000] PM: Preparing system for mem sleep
- [ 1600.270000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1600.300000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1600.320000] PM: Entering mem sleep
- [ 1600.320000] [pm]3 state begin
- [ 1600.320000] [CSI]csi_suspend
- [ 1600.330000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1600.330000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1600.340000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1600.350000] [audio codec]:suspend start5000
- [ 1601.000000] [audio codec]:suspend end
- [ 1601.000000] pmu_suspend_chgcur = 1000000
- [ 1601.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.010000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:48
- [ 1601.020000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.020000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:48
- [ 1601.030000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.030000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:48
- [ 1601.040000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.040000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:48
- [ 1601.050000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.050000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:28:48
- [ 1601.060000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1601.070000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1601.070000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1601.080000] [sw-ohci1]: close clock
- [ 1601.080000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1601.090000] [sw-ehci1]: Set USB Power OFF
- [ 1601.090000] [sw-ehci1]: close clock
- [ 1601.090000] [sw_hcd0]: sw_hcd_suspend start
- [ 1601.100000] wrn: hcd is disable, need not enter to suspend
- [ 1601.100000] [sw_udc]: sw_udc_suspend start
- [ 1601.110000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1601.110000] [i2c2] suspend okay..
- [ 1601.120000] [i2c1] suspend okay..
- [ 1601.120000] [NAND] nand_suspend
- [ 1601.120000] [NAND] nand_suspend ok
- [ 1601.130000] [sw_dmac_suspend] enter
- [ 1601.130000] PM: suspend of devices complete after 806.383 msecs
- [ 1601.140000] [pm]prepare
- [ 1601.140000] PM: late suspend of devices complete after 0.257 msecs
- [ 1601.150000] [pm]prepare_late
- [ 1601.150000] [pm]enter state 3
- [ 1601.150000] [pm]platform wakeup, wakesource is:0x10
- [ 1601.150000] PM: early resume of devices complete after 0.154 msecs
- [ 1601.160000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.170000] [pm]platform wakeup finish
- [ 1601.170000] [sw_dmac_resume] enter
- [ 1601.170000] [NAND] nand_resume
- [ 1601.180000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:32
- [ 1601.180000] wakeup wake lock: alarm_rtc
- [ 1601.190000] [NAND] nand gpio_request
- [ 1601.190000] twi1, apb clock = 24000000
- [ 1601.190000] [i2c1] resume okay..
- [ 1601.200000] twi2, apb clock = 24000000
- [ 1601.200000] [i2c2] resume okay..
- [ 1601.200000] [sw_udc]: sw_udc_resume start
- [ 1601.210000] [sw_udc]: udc is disable, need not enter to resume
- [ 1601.210000] [sw_hcd0]: sw_hcd_resume start
- [ 1601.220000] wrn: hcd is disable, need not resume
- [ 1601.240000] wemac wemac.0: resetting device
- [ 1601.240000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1601.250000] [sw-ehci1]: open clock
- [ 1601.270000] [sw-ehci1]: Set USB Power ON
- [ 1601.270000] [sw-ehci1]: lost power, restarting
- [ 1601.280000] usb usb2: root hub lost power or was reset
- [ 1601.430000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1601.430000] [sw-ohci1]: open clock
- [ 1601.510000] usb usb3: root hub lost power or was reset
- [ 1601.750000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1601.750000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1601.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1601.760000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:32
- [ 1601.770000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1601.780000] battery vol change: 99->100
- [ 1601.780000] [AXP]=======================val = 0x0
- [ 1601.790000] pmu_resume_chgcur = 300000
- [ 1601.790000] [audio codec]:resume start
- [ 1601.790000] codec_resume_events,1271
- [ 1601.800000] [audio codec]:resume end
- [ 1601.800000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1601.810000] [mmc_pm]: No sdio card, please check your config !!
- [ 1601.810000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1601.820000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1601.920000] [CSI]csi_resume
- [ 1601.920000] PM: resume of devices complete after 748.668 msecs
- [ 1601.920000] [pm]aw_pm_end!
- [ 1601.930000] PM: Finishing wakeup.
- [ 1601.930000] Restarting tasks ... done.
- [ 1601.990000] suspend: exit suspend, ret = 0 (2012-04-25 00:54:15.700104833 UTC)
- [ 1602.460000] ====pa turn on===
- [ 1607.020000] [pm]valid
- [ 1607.020000] PM: Syncing filesystems ... done.
- [ 1607.030000] PM: Preparing system for mem sleep
- [ 1607.030000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 1607.060000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1607.080000] PM: Entering mem sleep
- [ 1607.080000] [pm]3 state begin
- [ 1607.080000] [CSI]csi_suspend
- [ 1607.090000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1607.090000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1607.100000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1607.110000] [audio codec]:suspend start5000
- [ 1607.760000] [audio codec]:suspend end
- [ 1607.760000] pmu_suspend_chgcur = 1000000
- [ 1607.770000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.770000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:38
- [ 1607.780000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.780000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:38
- [ 1607.790000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.790000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:38
- [ 1607.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.800000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:38
- [ 1607.810000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.810000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:53:38
- [ 1607.820000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1607.830000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1607.830000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1607.840000] [sw-ohci1]: close clock
- [ 1607.840000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1607.850000] [sw-ehci1]: Set USB Power OFF
- [ 1607.850000] [sw-ehci1]: close clock
- [ 1607.850000] [sw_hcd0]: sw_hcd_suspend start
- [ 1607.860000] wrn: hcd is disable, need not enter to suspend
- [ 1607.860000] [sw_udc]: sw_udc_suspend start
- [ 1607.870000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1607.870000] [i2c2] suspend okay..
- [ 1607.880000] [i2c1] suspend okay..
- [ 1607.880000] [NAND] nand_suspend
- [ 1607.880000] [NAND] nand_suspend ok
- [ 1607.890000] [sw_dmac_suspend] enter
- [ 1607.890000] PM: suspend of devices complete after 806.424 msecs
- [ 1607.900000] [pm]prepare
- [ 1607.900000] PM: late suspend of devices complete after 0.257 msecs
- [ 1607.910000] [pm]prepare_late
- [ 1607.910000] [pm]enter state 3
- [ 1607.910000] [pm]platform wakeup, wakesource is:0x10
- [ 1607.910000] PM: early resume of devices complete after 0.152 msecs
- [ 1607.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1607.930000] [pm]platform wakeup finish
- [ 1607.930000] [sw_dmac_resume] enter
- [ 1607.930000] [NAND] nand_resume
- [ 1607.940000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:42
- [ 1607.940000] wakeup wake lock: alarm_rtc
- [ 1607.950000] [NAND] nand gpio_request
- [ 1607.950000] twi1, apb clock = 24000000
- [ 1607.950000] [i2c1] resume okay..
- [ 1607.960000] twi2, apb clock = 24000000
- [ 1607.960000] [i2c2] resume okay..
- [ 1607.960000] [sw_udc]: sw_udc_resume start
- [ 1607.970000] [sw_udc]: udc is disable, need not enter to resume
- [ 1607.970000] [sw_hcd0]: sw_hcd_resume start
- [ 1607.980000] wrn: hcd is disable, need not resume
- [ 1608.000000] wemac wemac.0: resetting device
- [ 1608.000000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1608.010000] [sw-ehci1]: open clock
- [ 1608.030000] [sw-ehci1]: Set USB Power ON
- [ 1608.030000] [sw-ehci1]: lost power, restarting
- [ 1608.040000] usb usb2: root hub lost power or was reset
- [ 1608.190000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1608.190000] [sw-ohci1]: open clock
- [ 1608.270000] usb usb3: root hub lost power or was reset
- [ 1608.510000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1608.510000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1608.520000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1608.520000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:42
- [ 1608.530000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1608.540000] battery vol change: 99->100
- [ 1608.540000] [AXP]=======================val = 0x0
- [ 1608.550000] pmu_resume_chgcur = 300000
- [ 1608.550000] [audio codec]:resume start
- [ 1608.550000] codec_resume_events,1271
- [ 1608.560000] [audio codec]:resume end
- [ 1608.560000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1608.570000] [mmc_pm]: No sdio card, please check your config !!
- [ 1608.570000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1608.580000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1608.680000] [CSI]csi_resume
- [ 1608.680000] PM: resume of devices complete after 748.567 msecs
- [ 1608.680000] [pm]aw_pm_end!
- [ 1608.690000] PM: Finishing wakeup.
- [ 1608.690000] Restarting tasks ... done.
- [ 1608.730000] suspend: exit suspend, ret = 0 (2012-04-25 00:59:25.745144999 UTC)
- [ 1608.800000] active wake lock PowerManagerService
- [ 1608.800000] active wake lock unknown_wakeups, time left 500
- [ 1609.220000] ====pa turn on===
- [ 1613.810000] [pm]valid
- [ 1613.810000] PM: Syncing filesystems ... done.
- [ 1613.810000] PM: Preparing system for mem sleep
- [ 1613.820000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1613.850000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1613.870000] PM: Entering mem sleep
- [ 1613.870000] [pm]3 state begin
- [ 1613.870000] [CSI]csi_suspend
- [ 1613.880000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1613.880000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1613.890000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1613.900000] [audio codec]:suspend start5000
- [ 1614.550000] [audio codec]:suspend end
- [ 1614.550000] pmu_suspend_chgcur = 1000000
- [ 1614.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.560000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:48
- [ 1614.570000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.570000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:48
- [ 1614.580000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.580000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:48
- [ 1614.590000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.600000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:48
- [ 1614.600000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 0:58:48
- [ 1614.610000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1614.620000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1614.620000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1614.630000] [sw-ohci1]: close clock
- [ 1614.630000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1614.640000] [sw-ehci1]: Set USB Power OFF
- [ 1614.640000] [sw-ehci1]: close clock
- [ 1614.650000] [sw_hcd0]: sw_hcd_suspend start
- [ 1614.650000] wrn: hcd is disable, need not enter to suspend
- [ 1614.650000] [sw_udc]: sw_udc_suspend start
- [ 1614.660000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1614.670000] [i2c2] suspend okay..
- [ 1614.670000] [i2c1] suspend okay..
- [ 1614.670000] [NAND] nand_suspend
- [ 1614.680000] [NAND] nand_suspend ok
- [ 1614.680000] [sw_dmac_suspend] enter
- [ 1614.680000] PM: suspend of devices complete after 807.518 msecs
- [ 1614.690000] [pm]prepare
- [ 1614.690000] PM: late suspend of devices complete after 0.258 msecs
- [ 1614.700000] [pm]prepare_late
- [ 1614.700000] [pm]enter state 3
- [ 1614.700000] [pm]platform wakeup, wakesource is:0x10
- [ 1614.710000] PM: early resume of devices complete after 0.154 msecs
- [ 1614.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1614.720000] [pm]platform wakeup finish
- [ 1614.720000] [sw_dmac_resume] enter
- [ 1614.730000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:33
- [ 1614.730000] wakeup wake lock: alarm_rtc
- [ 1614.730000] [NAND] nand_resume
- [ 1614.740000] [NAND] nand gpio_request
- [ 1614.740000] twi1, apb clock = 24000000
- [ 1614.750000] [i2c1] resume okay..
- [ 1614.750000] twi2, apb clock = 24000000
- [ 1614.750000] [i2c2] resume okay..
- [ 1614.760000] [sw_udc]: sw_udc_resume start
- [ 1614.760000] [sw_udc]: udc is disable, need not enter to resume
- [ 1614.770000] [sw_hcd0]: sw_hcd_resume start
- [ 1614.770000] wrn: hcd is disable, need not resume
- [ 1614.790000] wemac wemac.0: resetting device
- [ 1614.790000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1614.800000] [sw-ehci1]: open clock
- [ 1614.820000] [sw-ehci1]: Set USB Power ON
- [ 1614.820000] [sw-ehci1]: lost power, restarting
- [ 1614.830000] usb usb2: root hub lost power or was reset
- [ 1614.980000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1614.980000] [sw-ohci1]: open clock
- [ 1615.060000] usb usb3: root hub lost power or was reset
- [ 1615.300000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1615.300000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1615.310000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1615.310000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:33
- [ 1615.320000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1615.330000] battery vol change: 99->100
- [ 1615.330000] [AXP]=======================val = 0x0
- [ 1615.340000] pmu_resume_chgcur = 300000
- [ 1615.340000] [audio codec]:resume start
- [ 1615.340000] codec_resume_events,1271
- [ 1615.350000] [audio codec]:resume end
- [ 1615.350000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1615.360000] [mmc_pm]: No sdio card, please check your config !!
- [ 1615.360000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1615.370000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1615.470000] [CSI]csi_resume
- [ 1615.470000] PM: resume of devices complete after 747.611 msecs
- [ 1615.470000] [pm]aw_pm_end!
- [ 1615.480000] PM: Finishing wakeup.
- [ 1615.480000] Restarting tasks ... done.
- [ 1615.510000] suspend: exit suspend, ret = 0 (2012-04-25 01:24:16.829988055 UTC)
- [ 1616.010000] ====pa turn on===
- [ 1620.620000] [pm]valid
- [ 1620.630000] PM: Syncing filesystems ... done.
- [ 1620.630000] PM: Preparing system for mem sleep
- [ 1620.640000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1620.670000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1620.690000] PM: Entering mem sleep
- [ 1620.690000] [pm]3 state begin
- [ 1620.690000] [CSI]csi_suspend
- [ 1620.700000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1620.700000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1620.710000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1620.720000] [audio codec]:suspend start5000
- [ 1621.370000] [audio codec]:suspend end
- [ 1621.370000] pmu_suspend_chgcur = 1000000
- [ 1621.380000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.380000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:39
- [ 1621.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.390000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:39
- [ 1621.400000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.400000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:39
- [ 1621.410000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.410000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:39
- [ 1621.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.420000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:23:39
- [ 1621.430000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1621.440000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1621.440000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1621.450000] [sw-ohci1]: close clock
- [ 1621.450000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1621.460000] [sw-ehci1]: Set USB Power OFF
- [ 1621.460000] [sw-ehci1]: close clock
- [ 1621.460000] [sw_hcd0]: sw_hcd_suspend start
- [ 1621.470000] wrn: hcd is disable, need not enter to suspend
- [ 1621.470000] [sw_udc]: sw_udc_suspend start
- [ 1621.480000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1621.480000] [i2c2] suspend okay..
- [ 1621.490000] [i2c1] suspend okay..
- [ 1621.490000] [NAND] nand_suspend
- [ 1621.490000] [NAND] nand_suspend ok
- [ 1621.500000] [sw_dmac_suspend] enter
- [ 1621.500000] PM: suspend of devices complete after 806.469 msecs
- [ 1621.510000] [pm]prepare
- [ 1621.510000] PM: late suspend of devices complete after 0.256 msecs
- [ 1621.520000] [pm]prepare_late
- [ 1621.520000] [pm]enter state 3
- [ 1621.520000] [pm]platform wakeup, wakesource is:0x10
- [ 1621.520000] PM: early resume of devices complete after 0.153 msecs
- [ 1621.530000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1621.540000] [pm]platform wakeup finish
- [ 1621.540000] [sw_dmac_resume] enter
- [ 1621.540000] [NAND] nand_resume
- [ 1621.550000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:41
- [ 1621.550000] wakeup wake lock: alarm_rtc
- [ 1621.560000] [NAND] nand gpio_request
- [ 1621.560000] twi1, apb clock = 24000000
- [ 1621.560000] [i2c1] resume okay..
- [ 1621.570000] twi2, apb clock = 24000000
- [ 1621.570000] [i2c2] resume okay..
- [ 1621.570000] [sw_udc]: sw_udc_resume start
- [ 1621.580000] [sw_udc]: udc is disable, need not enter to resume
- [ 1621.580000] [sw_hcd0]: sw_hcd_resume start
- [ 1621.590000] wrn: hcd is disable, need not resume
- [ 1621.610000] wemac wemac.0: resetting device
- [ 1621.610000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1621.620000] [sw-ehci1]: open clock
- [ 1621.640000] [sw-ehci1]: Set USB Power ON
- [ 1621.640000] [sw-ehci1]: lost power, restarting
- [ 1621.650000] usb usb2: root hub lost power or was reset
- [ 1621.800000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1621.800000] [sw-ohci1]: open clock
- [ 1621.880000] usb usb3: root hub lost power or was reset
- [ 1622.120000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1622.120000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1622.130000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1622.130000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:41
- [ 1622.140000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1622.150000] battery vol change: 99->100
- [ 1622.150000] [AXP]=======================val = 0x0
- [ 1622.160000] pmu_resume_chgcur = 300000
- [ 1622.160000] [audio codec]:resume start
- [ 1622.160000] codec_resume_events,1271
- [ 1622.170000] [audio codec]:resume end
- [ 1622.170000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1622.180000] [mmc_pm]: No sdio card, please check your config !!
- [ 1622.180000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1622.190000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1622.290000] [CSI]csi_resume
- [ 1622.290000] PM: resume of devices complete after 748.550 msecs
- [ 1622.290000] [pm]aw_pm_end!
- [ 1622.300000] PM: Finishing wakeup.
- [ 1622.300000] Restarting tasks ... done.
- [ 1622.330000] suspend: exit suspend, ret = 0 (2012-04-25 01:29:24.947177735 UTC)
- [ 1622.830000] ====pa turn on===
- [ 1627.350000] [pm]valid
- [ 1627.350000] PM: Syncing filesystems ... done.
- [ 1627.350000] PM: Preparing system for mem sleep
- [ 1627.360000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1627.390000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1627.410000] PM: Entering mem sleep
- [ 1627.410000] [pm]3 state begin
- [ 1627.410000] [CSI]csi_suspend
- [ 1627.420000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1627.420000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1627.430000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1627.440000] [audio codec]:suspend start5000
- [ 1628.090000] [audio codec]:suspend end
- [ 1628.090000] pmu_suspend_chgcur = 1000000
- [ 1628.100000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:47
- [ 1628.110000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.110000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:47
- [ 1628.120000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.120000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:47
- [ 1628.130000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.130000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:47
- [ 1628.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.140000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:28:47
- [ 1628.150000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1628.160000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1628.160000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1628.170000] [sw-ohci1]: close clock
- [ 1628.170000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1628.170000] [sw-ehci1]: Set USB Power OFF
- [ 1628.180000] [sw-ehci1]: close clock
- [ 1628.180000] [sw_hcd0]: sw_hcd_suspend start
- [ 1628.190000] wrn: hcd is disable, need not enter to suspend
- [ 1628.190000] [sw_udc]: sw_udc_suspend start
- [ 1628.200000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1628.200000] [i2c2] suspend okay..
- [ 1628.210000] [i2c1] suspend okay..
- [ 1628.210000] [NAND] nand_suspend
- [ 1628.210000] [NAND] nand_suspend ok
- [ 1628.220000] [sw_dmac_suspend] enter
- [ 1628.220000] PM: suspend of devices complete after 806.974 msecs
- [ 1628.230000] [pm]prepare
- [ 1628.230000] PM: late suspend of devices complete after 0.262 msecs
- [ 1628.240000] [pm]prepare_late
- [ 1628.240000] [pm]enter state 3
- [ 1628.240000] [pm]platform wakeup, wakesource is:0x10
- [ 1628.240000] PM: early resume of devices complete after 0.151 msecs
- [ 1628.250000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.260000] [pm]platform wakeup finish
- [ 1628.260000] [sw_dmac_resume] enter
- [ 1628.260000] [NAND] nand_resume
- [ 1628.270000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:34
- [ 1628.270000] wakeup wake lock: alarm_rtc
- [ 1628.280000] [NAND] nand gpio_request
- [ 1628.280000] twi1, apb clock = 24000000
- [ 1628.280000] [i2c1] resume okay..
- [ 1628.290000] twi2, apb clock = 24000000
- [ 1628.290000] [i2c2] resume okay..
- [ 1628.300000] [sw_udc]: sw_udc_resume start
- [ 1628.300000] [sw_udc]: udc is disable, need not enter to resume
- [ 1628.310000] [sw_hcd0]: sw_hcd_resume start
- [ 1628.310000] wrn: hcd is disable, need not resume
- [ 1628.330000] wemac wemac.0: resetting device
- [ 1628.330000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1628.340000] [sw-ehci1]: open clock
- [ 1628.360000] [sw-ehci1]: Set USB Power ON
- [ 1628.360000] [sw-ehci1]: lost power, restarting
- [ 1628.370000] usb usb2: root hub lost power or was reset
- [ 1628.520000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1628.520000] [sw-ohci1]: open clock
- [ 1628.600000] usb usb3: root hub lost power or was reset
- [ 1628.840000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1628.840000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1628.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1628.850000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:34
- [ 1628.860000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1628.870000] battery vol change: 99->100
- [ 1628.870000] [AXP]=======================val = 0x0
- [ 1628.880000] pmu_resume_chgcur = 300000
- [ 1628.880000] [audio codec]:resume start
- [ 1628.880000] codec_resume_events,1271
- [ 1628.890000] [audio codec]:resume end
- [ 1628.890000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1628.900000] [mmc_pm]: No sdio card, please check your config !!
- [ 1628.900000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1628.910000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1629.010000] [CSI]csi_resume
- [ 1629.010000] PM: resume of devices complete after 748.183 msecs
- [ 1629.010000] [pm]aw_pm_end!
- [ 1629.020000] PM: Finishing wakeup.
- [ 1629.020000] Restarting tasks ... done.
- [ 1629.050000] suspend: exit suspend, ret = 0 (2012-04-25 01:54:17.972963578 UTC)
- [ 1629.550000] ====pa turn on===
- [ 1634.160000] [pm]valid
- [ 1634.170000] PM: Syncing filesystems ... done.
- [ 1634.170000] PM: Preparing system for mem sleep
- [ 1634.180000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1634.210000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1634.230000] PM: Entering mem sleep
- [ 1634.230000] [pm]3 state begin
- [ 1634.230000] [CSI]csi_suspend
- [ 1634.240000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1634.240000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1634.250000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1634.260000] [audio codec]:suspend start5000
- [ 1634.910000] [audio codec]:suspend end
- [ 1634.910000] pmu_suspend_chgcur = 1000000
- [ 1634.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1634.920000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:40
- [ 1634.930000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1634.930000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:40
- [ 1634.940000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1634.940000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:40
- [ 1634.950000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1634.950000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:40
- [ 1634.960000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1634.960000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:53:40
- [ 1634.970000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1634.980000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1634.980000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1634.990000] [sw-ohci1]: close clock
- [ 1634.990000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1635.000000] [sw-ehci1]: Set USB Power OFF
- [ 1635.000000] [sw-ehci1]: close clock
- [ 1635.000000] [sw_hcd0]: sw_hcd_suspend start
- [ 1635.010000] wrn: hcd is disable, need not enter to suspend
- [ 1635.010000] [sw_udc]: sw_udc_suspend start
- [ 1635.020000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1635.020000] [i2c2] suspend okay..
- [ 1635.030000] [i2c1] suspend okay..
- [ 1635.030000] [NAND] nand_suspend
- [ 1635.030000] [NAND] nand_suspend ok
- [ 1635.040000] [sw_dmac_suspend] enter
- [ 1635.040000] PM: suspend of devices complete after 806.376 msecs
- [ 1635.050000] [pm]prepare
- [ 1635.050000] PM: late suspend of devices complete after 0.254 msecs
- [ 1635.060000] [pm]prepare_late
- [ 1635.060000] [pm]enter state 3
- [ 1635.060000] [pm]platform wakeup, wakesource is:0x10
- [ 1635.060000] PM: early resume of devices complete after 0.151 msecs
- [ 1635.070000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1635.080000] [pm]platform wakeup finish
- [ 1635.080000] [sw_dmac_resume] enter
- [ 1635.080000] [NAND] nand_resume
- [ 1635.090000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:41
- [ 1635.090000] wakeup wake lock: alarm_rtc
- [ 1635.100000] [NAND] nand gpio_request
- [ 1635.100000] twi1, apb clock = 24000000
- [ 1635.100000] [i2c1] resume okay..
- [ 1635.110000] twi2, apb clock = 24000000
- [ 1635.110000] [i2c2] resume okay..
- [ 1635.110000] [sw_udc]: sw_udc_resume start
- [ 1635.120000] [sw_udc]: udc is disable, need not enter to resume
- [ 1635.120000] [sw_hcd0]: sw_hcd_resume start
- [ 1635.130000] wrn: hcd is disable, need not resume
- [ 1635.150000] wemac wemac.0: resetting device
- [ 1635.150000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1635.160000] [sw-ehci1]: open clock
- [ 1635.180000] [sw-ehci1]: Set USB Power ON
- [ 1635.180000] [sw-ehci1]: lost power, restarting
- [ 1635.190000] usb usb2: root hub lost power or was reset
- [ 1635.340000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1635.340000] [sw-ohci1]: open clock
- [ 1635.420000] usb usb3: root hub lost power or was reset
- [ 1635.660000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1635.660000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1635.670000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1635.670000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:41
- [ 1635.680000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1635.690000] battery vol change: 99->100
- [ 1635.690000] [AXP]=======================val = 0x0
- [ 1635.700000] pmu_resume_chgcur = 300000
- [ 1635.700000] [audio codec]:resume start
- [ 1635.700000] codec_resume_events,1271
- [ 1635.710000] [audio codec]:resume end
- [ 1635.710000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1635.720000] [mmc_pm]: No sdio card, please check your config !!
- [ 1635.720000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1635.730000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1635.830000] [CSI]csi_resume
- [ 1635.830000] PM: resume of devices complete after 748.606 msecs
- [ 1635.830000] [pm]aw_pm_end!
- [ 1635.840000] PM: Finishing wakeup.
- [ 1635.840000] Restarting tasks ... done.
- [ 1635.890000] suspend: exit suspend, ret = 0 (2012-04-25 01:59:25.114923128 UTC)
- [ 1635.940000] active wake lock unknown_wakeups, time left 500
- [ 1636.370000] ====pa turn on===
- [ 1640.950000] [pm]valid
- [ 1640.950000] PM: Syncing filesystems ... done.
- [ 1640.950000] PM: Preparing system for mem sleep
- [ 1640.960000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1640.990000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1641.010000] PM: Entering mem sleep
- [ 1641.010000] [pm]3 state begin
- [ 1641.010000] [CSI]csi_suspend
- [ 1641.020000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1641.020000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1641.030000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1641.040000] [audio codec]:suspend start5000
- [ 1641.690000] [audio codec]:suspend end
- [ 1641.690000] pmu_suspend_chgcur = 1000000
- [ 1641.700000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.700000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:47
- [ 1641.710000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.710000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:47
- [ 1641.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.720000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:47
- [ 1641.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.730000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:47
- [ 1641.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.740000] sunxi-rtc sunxi-rtc: read time 2012-4-25 1:58:47
- [ 1641.750000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1641.760000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1641.760000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1641.770000] [sw-ohci1]: close clock
- [ 1641.770000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1641.780000] [sw-ehci1]: Set USB Power OFF
- [ 1641.780000] [sw-ehci1]: close clock
- [ 1641.780000] [sw_hcd0]: sw_hcd_suspend start
- [ 1641.790000] wrn: hcd is disable, need not enter to suspend
- [ 1641.790000] [sw_udc]: sw_udc_suspend start
- [ 1641.800000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1641.800000] [i2c2] suspend okay..
- [ 1641.810000] [i2c1] suspend okay..
- [ 1641.810000] [NAND] nand_suspend
- [ 1641.810000] [NAND] nand_suspend ok
- [ 1641.820000] [sw_dmac_suspend] enter
- [ 1641.820000] PM: suspend of devices complete after 806.389 msecs
- [ 1641.830000] [pm]prepare
- [ 1641.830000] PM: late suspend of devices complete after 0.255 msecs
- [ 1641.840000] [pm]prepare_late
- [ 1641.840000] [pm]enter state 3
- [ 1641.840000] [pm]platform wakeup, wakesource is:0x10
- [ 1641.840000] PM: early resume of devices complete after 0.157 msecs
- [ 1641.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1641.860000] [pm]platform wakeup finish
- [ 1641.860000] [sw_dmac_resume] enter
- [ 1641.860000] [NAND] nand_resume
- [ 1641.870000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:18:45
- [ 1641.870000] wakeup wake lock: alarm_rtc
- [ 1641.880000] [NAND] nand gpio_request
- [ 1641.880000] twi1, apb clock = 24000000
- [ 1641.880000] [i2c1] resume okay..
- [ 1641.890000] twi2, apb clock = 24000000
- [ 1641.890000] [i2c2] resume okay..
- [ 1641.890000] [sw_udc]: sw_udc_resume start
- [ 1641.900000] [sw_udc]: udc is disable, need not enter to resume
- [ 1641.900000] [sw_hcd0]: sw_hcd_resume start
- [ 1641.910000] wrn: hcd is disable, need not resume
- [ 1641.930000] wemac wemac.0: resetting device
- [ 1641.930000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1641.940000] [sw-ehci1]: open clock
- [ 1641.960000] [sw-ehci1]: Set USB Power ON
- [ 1641.960000] [sw-ehci1]: lost power, restarting
- [ 1641.970000] usb usb2: root hub lost power or was reset
- [ 1642.120000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1642.120000] [sw-ohci1]: open clock
- [ 1642.200000] usb usb3: root hub lost power or was reset
- [ 1642.440000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1642.440000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1642.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1642.450000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:18:45
- [ 1642.460000] val = 0x61,pre_rest_vol = 99,rest_vol = 99
- [ 1642.470000] battery vol change: 99->100
- [ 1642.470000] [AXP]=======================val = 0x0
- [ 1642.480000] pmu_resume_chgcur = 300000
- [ 1642.480000] [audio codec]:resume start
- [ 1642.480000] codec_resume_events,1271
- [ 1642.490000] [audio codec]:resume end
- [ 1642.490000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1642.500000] [mmc_pm]: No sdio card, please check your config !!
- [ 1642.500000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1642.510000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1642.610000] [CSI]csi_resume
- [ 1642.610000] PM: resume of devices complete after 748.646 msecs
- [ 1642.610000] [pm]aw_pm_end!
- [ 1642.620000] PM: Finishing wakeup.
- [ 1642.620000] Restarting tasks ... done.
- [ 1642.650000] suspend: exit suspend, ret = 0 (2012-04-25 02:19:29.177015467 UTC)
- [ 1643.150000] ====pa turn on===
- [ 1762.950000] [pm]valid
- [ 1762.950000] PM: Syncing filesystems ... done.
- [ 1762.970000] PM: Preparing system for mem sleep
- [ 1762.990000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 1763.060000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1763.080000] PM: Entering mem sleep
- [ 1763.080000] [pm]3 state begin
- [ 1763.090000] [CSI]csi_suspend
- [ 1763.090000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1763.100000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1763.110000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1763.110000] [audio codec]:suspend start5000
- [ 1763.780000] [audio codec]:suspend end
- [ 1763.780000] pmu_suspend_chgcur = 1000000
- [ 1763.790000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1763.800000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:20:47
- [ 1763.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1763.810000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:20:47
- [ 1763.810000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1763.820000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:20:47
- [ 1763.820000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1763.830000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:20:47
- [ 1763.840000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1763.840000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:20:47
- [ 1763.850000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1763.850000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1763.860000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1763.870000] [sw-ohci1]: close clock
- [ 1763.870000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1763.880000] [sw-ehci1]: Set USB Power OFF
- [ 1763.880000] [sw-ehci1]: close clock
- [ 1763.890000] [sw_hcd0]: sw_hcd_suspend start
- [ 1763.890000] wrn: hcd is disable, need not enter to suspend
- [ 1763.900000] [sw_udc]: sw_udc_suspend start
- [ 1763.900000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1763.910000] [i2c2] suspend okay..
- [ 1763.920000] [i2c1] suspend okay..
- [ 1763.920000] [NAND] nand_suspend
- [ 1763.920000] [NAND] nand_suspend ok
- [ 1763.930000] [sw_dmac_suspend] enter
- [ 1763.930000] PM: suspend of devices complete after 841.160 msecs
- [ 1763.940000] [pm]prepare
- [ 1763.940000] PM: late suspend of devices complete after 2.102 msecs
- [ 1763.950000] [pm]prepare_late
- [ 1763.950000] [pm]enter state 3
- [ 1763.950000] [pm]platform wakeup, wakesource is:0x1
- [ 1763.960000] PM: early resume of devices complete after 1.336 msecs
- [ 1763.970000] [pm]platform wakeup finish
- [ 1763.980000] [sw_dmac_resume] enter
- [ 1763.980000] [NAND] nand_resume
- [ 1763.980000] [NAND] nand gpio_request
- [ 1763.990000] twi1, apb clock = 24000000
- [ 1763.990000] [i2c1] resume okay..
- [ 1763.990000] twi2, apb clock = 24000000
- [ 1764.000000] [i2c2] resume okay..
- [ 1764.000000] [sw_udc]: sw_udc_resume start
- [ 1764.000000] [sw_udc]: udc is disable, need not enter to resume
- [ 1764.010000] [sw_hcd0]: sw_hcd_resume start
- [ 1764.010000] wrn: hcd is disable, need not resume
- [ 1764.040000] wemac wemac.0: resetting device
- [ 1764.040000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1764.050000] [sw-ehci1]: open clock
- [ 1764.070000] [sw-ehci1]: Set USB Power ON
- [ 1764.070000] [sw-ehci1]: lost power, restarting
- [ 1764.080000] usb usb2: root hub lost power or was reset
- [ 1764.230000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1764.230000] [sw-ohci1]: open clock
- [ 1764.310000] usb usb3: root hub lost power or was reset
- [ 1764.550000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1764.550000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1764.560000] wakeup wake lock: event0-148
- [ 1764.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1764.570000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:48
- [ 1764.570000] [AXP]battery state change
- [ 1764.580000] charger->usb_valid = 0
- [ 1764.580000] set usb vol-lim to 4000 mV, cur-lim to 0 mA
- [ 1764.590000] val = 0x64,pre_rest_vol = 100,rest_vol = 100
- [ 1764.600000] [AXP]=======================val = 0x0
- [ 1764.600000] [AXP]event = 0x20
- [ 1764.610000] pmu_resume_chgcur = 300000
- [ 1764.610000] [audio codec]:resume start
- [ 1764.610000] codec_resume_events,1271
- [ 1764.620000] [audio codec]:resume end
- [ 1764.620000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1764.630000] [mmc_pm]: No sdio card, please check your config !!
- [ 1764.630000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1764.640000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1764.740000] [CSI]csi_resume
- [ 1764.740000] PM: resume of devices complete after 761.900 msecs
- [ 1764.740000] [pm]aw_pm_end!
- [ 1764.750000] PM: Finishing wakeup.
- [ 1764.750000] Restarting tasks ... done.
- [ 1764.800000] suspend: exit suspend, ret = 0 (2012-04-25 02:23:31.609370856 UTC)
- [ 1765.280000] ====pa turn on===
- [ 1769.810000] [pm]valid
- [ 1769.810000] PM: Syncing filesystems ... done.
- [ 1769.810000] PM: Preparing system for mem sleep
- [ 1769.820000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1769.850000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1769.870000] PM: Entering mem sleep
- [ 1769.870000] [pm]3 state begin
- [ 1769.870000] [CSI]csi_suspend
- [ 1769.880000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1769.880000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1769.890000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1769.900000] [audio codec]:suspend start5000
- [ 1769.960000] [AXP]press short
- [ 1770.090000] [AXP]event = 0x20000
- [ 1770.550000] [audio codec]:suspend end
- [ 1770.560000] pmu_suspend_chgcur = 1000000
- [ 1770.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1770.570000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1770.570000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1770.580000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1770.580000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1770.590000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1770.600000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1770.600000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1770.610000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1770.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1770.620000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1770.620000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1770.630000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1770.630000] [sw-ohci1]: close clock
- [ 1770.640000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1770.640000] [sw-ehci1]: Set USB Power OFF
- [ 1770.650000] [sw-ehci1]: close clock
- [ 1770.650000] [sw_hcd0]: sw_hcd_suspend start
- [ 1770.650000] wrn: hcd is disable, need not enter to suspend
- [ 1770.660000] [sw_udc]: sw_udc_suspend start
- [ 1770.660000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1770.670000] [i2c2] suspend okay..
- [ 1770.670000] [i2c1] suspend okay..
- [ 1770.680000] [NAND] nand_suspend
- [ 1770.680000] [NAND] nand_suspend ok
- [ 1770.680000] [sw_dmac_suspend] enter
- [ 1770.690000] PM: suspend of devices complete after 812.277 msecs
- [ 1770.690000] [pm]prepare
- [ 1770.700000] active wake lock event1-148, time left 439
- [ 1770.700000] pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
- [ 1770.710000] PM: Device power.0 failed to suspend late: error -11
- [ 1770.710000] PM: early resume of devices complete after 0.098 msecs
- [ 1770.720000] PM: Some devices failed to power down
- [ 1770.720000] [pm]platform wakeup finish
- [ 1770.730000] [sw_dmac_resume] enter
- [ 1770.730000] [NAND] nand_resume
- [ 1770.740000] [NAND] nand gpio_request
- [ 1770.740000] twi1, apb clock = 24000000
- [ 1770.740000] [i2c1] resume okay..
- [ 1770.750000] twi2, apb clock = 24000000
- [ 1770.750000] [i2c2] resume okay..
- [ 1770.750000] [sw_udc]: sw_udc_resume start
- [ 1770.760000] [sw_udc]: udc is disable, need not enter to resume
- [ 1770.760000] [sw_hcd0]: sw_hcd_resume start
- [ 1770.770000] wrn: hcd is disable, need not resume
- [ 1770.790000] wemac wemac.0: resetting device
- [ 1770.790000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1770.800000] [sw-ehci1]: open clock
- [ 1770.820000] [sw-ehci1]: Set USB Power ON
- [ 1770.820000] [sw-ehci1]: lost power, restarting
- [ 1770.830000] usb usb2: root hub lost power or was reset
- [ 1770.980000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1770.980000] [sw-ohci1]: open clock
- [ 1771.060000] usb usb3: root hub lost power or was reset
- [ 1771.300000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1771.300000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1771.310000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1771.310000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:22:54
- [ 1771.320000] [AXP]=======================val = 0x0
- [ 1771.330000] pmu_resume_chgcur = 300000
- [ 1771.330000] [audio codec]:resume start
- [ 1771.330000] codec_resume_events,1271
- [ 1771.340000] [audio codec]:resume end
- [ 1771.340000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1771.350000] [mmc_pm]: No sdio card, please check your config !!
- [ 1771.350000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1771.360000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1771.460000] [CSI]csi_resume
- [ 1771.460000] PM: resume of devices complete after 729.652 msecs
- [ 1771.460000] [pm]aw_pm_end!
- [ 1771.470000] PM: Finishing wakeup.
- [ 1771.470000] Restarting tasks ...
- [ 1771.480000] request_suspend_state: wakeup (3->0) at 1771488094993 (2012-04-25 02:23:38.295428407 UTC)
- [ 1771.500000] done.
- [ 1771.510000] suspend: exit suspend, ret = -11 (2012-04-25 02:23:38.318766383 UTC)
- [ 1771.510000] =======goodix_ts_late_resume========
- [ 1771.650000] display late resume enter: backlight_late_resume
- [ 1772.000000] ====pa turn on===
- [ 1772.230000] display late resume done: backlight_late_resume
- [ 1772.230000] enter laterresume: sun4i_keyboard_resume.
- [ 1772.240000] [AXP]======late resume=======
- [ 1772.250000] mma7660 late resume
- [ 1773.970000] [AXP]press short
- [ 1774.080000] [AXP]event = 0x20000
- [ 1774.380000] [pm]valid
- [ 1774.380000] request_suspend_state: sleep (0->3) at 1774382444101 (2012-04-25 02:23:41.189778099 UTC)
- [ 1774.390000] mma7660 early suspend
- [ 1774.390000] [AXP]======early suspend=======
- [ 1774.400000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 1774.400000] display early suspend: backlight_early_suspend
- [ 1775.450000] =======goodix_ts_early_suspend========
- [ 1775.450000] Goodix-TS 2-005d: Send suspend cmd
- [ 1779.390000] [pm]valid
- [ 1779.390000] PM: Syncing filesystems ... done.
- [ 1779.390000] PM: Preparing system for mem sleep
- [ 1779.400000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1779.430000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1779.450000] PM: Entering mem sleep
- [ 1779.450000] [pm]3 state begin
- [ 1779.450000] [CSI]csi_suspend
- [ 1779.460000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1779.460000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1779.470000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1779.480000] [audio codec]:suspend start5000
- [ 1780.130000] [audio codec]:suspend end
- [ 1780.130000] pmu_suspend_chgcur = 1000000
- [ 1780.140000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.140000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:3
- [ 1780.150000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.150000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:3
- [ 1780.160000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.160000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:3
- [ 1780.170000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.170000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:3
- [ 1780.180000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.180000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:3
- [ 1780.190000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1780.200000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1780.200000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1780.210000] [sw-ohci1]: close clock
- [ 1780.210000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1780.210000] [sw-ehci1]: Set USB Power OFF
- [ 1780.220000] [sw-ehci1]: close clock
- [ 1780.220000] [sw_hcd0]: sw_hcd_suspend start
- [ 1780.230000] wrn: hcd is disable, need not enter to suspend
- [ 1780.230000] [sw_udc]: sw_udc_suspend start
- [ 1780.240000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1780.240000] [i2c2] suspend okay..
- [ 1780.250000] [i2c1] suspend okay..
- [ 1780.250000] [NAND] nand_suspend
- [ 1780.250000] [NAND] nand_suspend ok
- [ 1780.260000] [sw_dmac_suspend] enter
- [ 1780.260000] PM: suspend of devices complete after 805.464 msecs
- [ 1780.270000] [pm]prepare
- [ 1780.270000] PM: late suspend of devices complete after 0.249 msecs
- [ 1780.280000] [pm]prepare_late
- [ 1780.280000] [pm]enter state 3
- [ 1780.280000] [pm]platform wakeup, wakesource is:0x10
- [ 1780.280000] PM: early resume of devices complete after 0.155 msecs
- [ 1780.290000] [pm]platform wakeup finish
- [ 1780.290000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.300000] [sw_dmac_resume] enter
- [ 1780.300000] [NAND] nand_resume
- [ 1780.310000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:35
- [ 1780.310000] wakeup wake lock: alarm_rtc
- [ 1780.320000] [NAND] nand gpio_request
- [ 1780.320000] twi1, apb clock = 24000000
- [ 1780.320000] [i2c1] resume okay..
- [ 1780.330000] twi2, apb clock = 24000000
- [ 1780.330000] [i2c2] resume okay..
- [ 1780.330000] [sw_udc]: sw_udc_resume start
- [ 1780.340000] [sw_udc]: udc is disable, need not enter to resume
- [ 1780.340000] [sw_hcd0]: sw_hcd_resume start
- [ 1780.350000] wrn: hcd is disable, need not resume
- [ 1780.370000] wemac wemac.0: resetting device
- [ 1780.370000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1780.380000] [sw-ehci1]: open clock
- [ 1780.400000] [sw-ehci1]: Set USB Power ON
- [ 1780.400000] [sw-ehci1]: lost power, restarting
- [ 1780.410000] usb usb2: root hub lost power or was reset
- [ 1780.560000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1780.560000] [sw-ohci1]: open clock
- [ 1780.640000] usb usb3: root hub lost power or was reset
- [ 1780.880000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1780.880000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1780.890000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1780.890000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:35
- [ 1780.900000] [AXP]=======================val = 0x0
- [ 1780.910000] pmu_resume_chgcur = 300000
- [ 1780.910000] [audio codec]:resume start
- [ 1780.910000] codec_resume_events,1271
- [ 1780.920000] [audio codec]:resume end
- [ 1780.920000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1780.930000] [mmc_pm]: No sdio card, please check your config !!
- [ 1780.930000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1780.940000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1781.040000] [CSI]csi_resume
- [ 1781.040000] PM: resume of devices complete after 738.368 msecs
- [ 1781.040000] [pm]aw_pm_end!
- [ 1781.050000] PM: Finishing wakeup.
- [ 1781.050000] Restarting tasks ... done.
- [ 1781.090000] suspend: exit suspend, ret = 0 (2012-04-25 02:24:19.200457411 UTC)
- [ 1781.580000] ====pa turn on===
- [ 1786.110000] [pm]valid
- [ 1786.110000] PM: Syncing filesystems ... done.
- [ 1786.110000] PM: Preparing system for mem sleep
- [ 1786.120000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1786.150000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1786.170000] PM: Entering mem sleep
- [ 1786.170000] [pm]3 state begin
- [ 1786.170000] [CSI]csi_suspend
- [ 1786.180000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1786.180000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1786.190000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1786.200000] [audio codec]:suspend start5000
- [ 1786.850000] [audio codec]:suspend end
- [ 1786.850000] pmu_suspend_chgcur = 1000000
- [ 1786.860000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1786.860000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:41
- [ 1786.870000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1786.870000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:41
- [ 1786.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1786.880000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:41
- [ 1786.890000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1786.900000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:41
- [ 1786.900000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1786.910000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:23:41
- [ 1786.910000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1786.920000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1786.920000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1786.930000] [sw-ohci1]: close clock
- [ 1786.930000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1786.940000] [sw-ehci1]: Set USB Power OFF
- [ 1786.940000] [sw-ehci1]: close clock
- [ 1786.950000] [sw_hcd0]: sw_hcd_suspend start
- [ 1786.950000] wrn: hcd is disable, need not enter to suspend
- [ 1786.950000] [sw_udc]: sw_udc_suspend start
- [ 1786.960000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1786.970000] [i2c2] suspend okay..
- [ 1786.970000] [i2c1] suspend okay..
- [ 1786.970000] [NAND] nand_suspend
- [ 1786.980000] [NAND] nand_suspend ok
- [ 1786.980000] [sw_dmac_suspend] enter
- [ 1786.980000] PM: suspend of devices complete after 807.540 msecs
- [ 1786.990000] [pm]prepare
- [ 1786.990000] PM: late suspend of devices complete after 0.262 msecs
- [ 1787.000000] [pm]prepare_late
- [ 1787.000000] [pm]enter state 3
- [ 1787.000000] [pm]platform wakeup, wakesource is:0x10
- [ 1787.010000] PM: early resume of devices complete after 0.157 msecs
- [ 1787.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1787.020000] [pm]platform wakeup finish
- [ 1787.020000] [sw_dmac_resume] enter
- [ 1787.030000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:41
- [ 1787.030000] wakeup wake lock: alarm_rtc
- [ 1787.030000] [NAND] nand_resume
- [ 1787.040000] [NAND] nand gpio_request
- [ 1787.040000] twi1, apb clock = 24000000
- [ 1787.050000] [i2c1] resume okay..
- [ 1787.050000] twi2, apb clock = 24000000
- [ 1787.050000] [i2c2] resume okay..
- [ 1787.060000] [sw_udc]: sw_udc_resume start
- [ 1787.060000] [sw_udc]: udc is disable, need not enter to resume
- [ 1787.070000] [sw_hcd0]: sw_hcd_resume start
- [ 1787.070000] wrn: hcd is disable, need not resume
- [ 1787.090000] wemac wemac.0: resetting device
- [ 1787.090000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1787.100000] [sw-ehci1]: open clock
- [ 1787.120000] [sw-ehci1]: Set USB Power ON
- [ 1787.120000] [sw-ehci1]: lost power, restarting
- [ 1787.130000] usb usb2: root hub lost power or was reset
- [ 1787.280000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1787.280000] [sw-ohci1]: open clock
- [ 1787.360000] usb usb3: root hub lost power or was reset
- [ 1787.600000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1787.600000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1787.610000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1787.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:41
- [ 1787.620000] val = 0x63,pre_rest_vol = 99,rest_vol = 99
- [ 1787.630000] [AXP]=======================val = 0x0
- [ 1787.630000] pmu_resume_chgcur = 300000
- [ 1787.640000] [audio codec]:resume start
- [ 1787.640000] codec_resume_events,1271
- [ 1787.640000] [audio codec]:resume end
- [ 1787.650000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1787.650000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1787.660000] [mmc_pm]: No sdio card, please check your config !!
- [ 1787.660000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1787.770000] [CSI]csi_resume
- [ 1787.770000] PM: resume of devices complete after 747.622 msecs
- [ 1787.770000] [pm]aw_pm_end!
- [ 1787.780000] PM: Finishing wakeup.
- [ 1787.780000] Restarting tasks ... done.
- [ 1787.830000] suspend: exit suspend, ret = 0 (2012-04-25 02:29:25.249334351 UTC)
- [ 1787.860000] active wake lock unknown_wakeups, time left 500
- [ 1788.290000] ====pa turn on===
- [ 1792.860000] [pm]valid
- [ 1792.860000] PM: Syncing filesystems ... done.
- [ 1792.860000] PM: Preparing system for mem sleep
- [ 1792.870000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1792.900000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1792.920000] PM: Entering mem sleep
- [ 1792.920000] [pm]3 state begin
- [ 1792.920000] [CSI]csi_suspend
- [ 1792.930000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1792.930000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1792.940000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1792.950000] [audio codec]:suspend start5000
- [ 1793.600000] [audio codec]:suspend end
- [ 1793.600000] pmu_suspend_chgcur = 1000000
- [ 1793.610000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:47
- [ 1793.620000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.620000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:47
- [ 1793.630000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.630000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:47
- [ 1793.640000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.640000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:47
- [ 1793.650000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.650000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:28:47
- [ 1793.660000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1793.670000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1793.670000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1793.680000] [sw-ohci1]: close clock
- [ 1793.680000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1793.690000] [sw-ehci1]: Set USB Power OFF
- [ 1793.690000] [sw-ehci1]: close clock
- [ 1793.690000] [sw_hcd0]: sw_hcd_suspend start
- [ 1793.700000] wrn: hcd is disable, need not enter to suspend
- [ 1793.700000] [sw_udc]: sw_udc_suspend start
- [ 1793.710000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1793.710000] [i2c2] suspend okay..
- [ 1793.720000] [i2c1] suspend okay..
- [ 1793.720000] [NAND] nand_suspend
- [ 1793.720000] [NAND] nand_suspend ok
- [ 1793.730000] [sw_dmac_suspend] enter
- [ 1793.730000] PM: suspend of devices complete after 806.430 msecs
- [ 1793.740000] [pm]prepare
- [ 1793.740000] PM: late suspend of devices complete after 0.244 msecs
- [ 1793.750000] [pm]prepare_late
- [ 1793.750000] [pm]enter state 3
- [ 1793.750000] [pm]platform wakeup, wakesource is:0x10
- [ 1793.750000] PM: early resume of devices complete after 0.148 msecs
- [ 1793.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1793.770000] [pm]platform wakeup finish
- [ 1793.770000] [sw_dmac_resume] enter
- [ 1793.770000] [NAND] nand_resume
- [ 1793.780000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:36
- [ 1793.780000] wakeup wake lock: alarm_rtc
- [ 1793.790000] [NAND] nand gpio_request
- [ 1793.790000] twi1, apb clock = 24000000
- [ 1793.790000] [i2c1] resume okay..
- [ 1793.800000] twi2, apb clock = 24000000
- [ 1793.800000] [i2c2] resume okay..
- [ 1793.800000] [sw_udc]: sw_udc_resume start
- [ 1793.810000] [sw_udc]: udc is disable, need not enter to resume
- [ 1793.810000] [sw_hcd0]: sw_hcd_resume start
- [ 1793.820000] wrn: hcd is disable, need not resume
- [ 1793.840000] wemac wemac.0: resetting device
- [ 1793.840000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1793.850000] [sw-ehci1]: open clock
- [ 1793.870000] [sw-ehci1]: Set USB Power ON
- [ 1793.870000] [sw-ehci1]: lost power, restarting
- [ 1793.880000] usb usb2: root hub lost power or was reset
- [ 1794.030000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1794.030000] [sw-ohci1]: open clock
- [ 1794.110000] usb usb3: root hub lost power or was reset
- [ 1794.350000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1794.350000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1794.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1794.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:36
- [ 1794.370000] val = 0x63,pre_rest_vol = 99,rest_vol = 99
- [ 1794.380000] [AXP]=======================val = 0x0
- [ 1794.380000] pmu_resume_chgcur = 300000
- [ 1794.390000] [audio codec]:resume start
- [ 1794.390000] codec_resume_events,1271
- [ 1794.390000] [audio codec]:resume end
- [ 1794.400000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1794.400000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1794.410000] [mmc_pm]: No sdio card, please check your config !!
- [ 1794.410000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1794.520000] [CSI]csi_resume
- [ 1794.520000] PM: resume of devices complete after 748.631 msecs
- [ 1794.520000] [pm]aw_pm_end!
- [ 1794.530000] PM: Finishing wakeup.
- [ 1794.530000] Restarting tasks ... done.
- [ 1794.560000] suspend: exit suspend, ret = 0 (2012-04-25 02:54:20.275449735 UTC)
- [ 1795.040000] ====pa turn on===
- [ 1799.600000] [pm]valid
- [ 1799.600000] PM: Syncing filesystems ... done.
- [ 1799.600000] PM: Preparing system for mem sleep
- [ 1799.610000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 1799.640000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1799.660000] PM: Entering mem sleep
- [ 1799.660000] [pm]3 state begin
- [ 1799.660000] [CSI]csi_suspend
- [ 1799.670000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1799.670000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1799.680000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1799.690000] [audio codec]:suspend start5000
- [ 1800.340000] [audio codec]:suspend end
- [ 1800.340000] pmu_suspend_chgcur = 1000000
- [ 1800.350000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.350000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:42
- [ 1800.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:42
- [ 1800.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.370000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:42
- [ 1800.380000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.380000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:42
- [ 1800.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.390000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:53:42
- [ 1800.400000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1800.410000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1800.410000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1800.420000] [sw-ohci1]: close clock
- [ 1800.420000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1800.420000] [sw-ehci1]: Set USB Power OFF
- [ 1800.430000] [sw-ehci1]: close clock
- [ 1800.430000] [sw_hcd0]: sw_hcd_suspend start
- [ 1800.440000] wrn: hcd is disable, need not enter to suspend
- [ 1800.440000] [sw_udc]: sw_udc_suspend start
- [ 1800.450000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1800.450000] [i2c2] suspend okay..
- [ 1800.460000] [i2c1] suspend okay..
- [ 1800.460000] [NAND] nand_suspend
- [ 1800.460000] [NAND] nand_suspend ok
- [ 1800.470000] [sw_dmac_suspend] enter
- [ 1800.470000] PM: suspend of devices complete after 805.317 msecs
- [ 1800.480000] [pm]prepare
- [ 1800.480000] PM: late suspend of devices complete after 0.211 msecs
- [ 1800.480000] [pm]prepare_late
- [ 1800.490000] [pm]enter state 3
- [ 1800.490000] [pm]platform wakeup, wakesource is:0x10
- [ 1800.490000] PM: early resume of devices complete after 0.124 msecs
- [ 1800.500000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1800.500000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:58:41
- [ 1800.510000] [pm]platform wakeup finish
- [ 1800.510000] [sw_dmac_resume] enter
- [ 1800.520000] wakeup wake lock: alarm_rtc
- [ 1800.520000] [NAND] nand_resume
- [ 1800.520000] [NAND] nand gpio_request
- [ 1800.530000] twi1, apb clock = 24000000
- [ 1800.530000] [i2c1] resume okay..
- [ 1800.530000] twi2, apb clock = 24000000
- [ 1800.540000] [i2c2] resume okay..
- [ 1800.540000] [sw_udc]: sw_udc_resume start
- [ 1800.550000] [sw_udc]: udc is disable, need not enter to resume
- [ 1800.550000] [sw_hcd0]: sw_hcd_resume start
- [ 1800.560000] wrn: hcd is disable, need not resume
- [ 1800.580000] wemac wemac.0: resetting device
- [ 1800.580000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1800.590000] [sw-ehci1]: open clock
- [ 1800.610000] [sw-ehci1]: Set USB Power ON
- [ 1800.610000] [sw-ehci1]: lost power, restarting
- [ 1800.620000] usb usb2: root hub lost power or was reset
- [ 1800.770000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1800.770000] [sw-ohci1]: open clock
- [ 1800.850000] usb usb3: root hub lost power or was reset
- [ 1801.090000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1801.090000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1801.100000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1801.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 2:58:41
- [ 1801.110000] val = 0x63,pre_rest_vol = 99,rest_vol = 99
- [ 1801.120000] [AXP]=======================val = 0x0
- [ 1801.120000] pmu_resume_chgcur = 300000
- [ 1801.130000] [audio codec]:resume start
- [ 1801.130000] codec_resume_events,1271
- [ 1801.130000] [audio codec]:resume end
- [ 1801.140000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1801.140000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1801.150000] [mmc_pm]: No sdio card, please check your config !!
- [ 1801.150000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1801.260000] [CSI]csi_resume
- [ 1801.260000] PM: resume of devices complete after 744.710 msecs
- [ 1801.260000] [pm]aw_pm_end!
- [ 1801.270000] PM: Finishing wakeup.
- [ 1801.270000] Restarting tasks ... done.
- [ 1801.330000] suspend: exit suspend, ret = 0 (2012-04-25 02:59:25.345880095 UTC)
- [ 1801.780000] ====pa turn on===
- [ 1891.450000] battery vol change: 99->98
- [ 1924.130000] [pm]valid
- [ 1924.130000] PM: Syncing filesystems ... done.
- [ 1924.150000] PM: Preparing system for mem sleep
- [ 1924.170000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 1924.240000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 1924.260000] PM: Entering mem sleep
- [ 1924.260000] [pm]3 state begin
- [ 1924.270000] [CSI]csi_suspend
- [ 1924.270000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 1924.280000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 1924.290000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 1924.290000] [audio codec]:suspend start5000
- [ 1924.960000] [audio codec]:suspend end
- [ 1924.960000] pmu_suspend_chgcur = 1000000
- [ 1924.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1924.980000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:0:45
- [ 1924.980000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1924.990000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:0:45
- [ 1924.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1925.000000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:0:45
- [ 1925.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1925.010000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:0:45
- [ 1925.020000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1925.020000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:0:45
- [ 1925.030000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1925.030000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1925.040000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 1925.050000] [sw-ohci1]: close clock
- [ 1925.050000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 1925.060000] [sw-ehci1]: Set USB Power OFF
- [ 1925.060000] [sw-ehci1]: close clock
- [ 1925.070000] [sw_hcd0]: sw_hcd_suspend start
- [ 1925.070000] wrn: hcd is disable, need not enter to suspend
- [ 1925.080000] [sw_udc]: sw_udc_suspend start
- [ 1925.080000] [sw_udc]: udc is disable, need not enter to suspend
- [ 1925.090000] [i2c2] suspend okay..
- [ 1925.100000] [i2c1] suspend okay..
- [ 1925.100000] [NAND] nand_suspend
- [ 1925.100000] [NAND] nand_suspend ok
- [ 1925.110000] [sw_dmac_suspend] enter
- [ 1925.110000] PM: suspend of devices complete after 840.813 msecs
- [ 1925.120000] [pm]prepare
- [ 1925.120000] PM: late suspend of devices complete after 2.096 msecs
- [ 1925.130000] [pm]prepare_late
- [ 1925.130000] [pm]enter state 3
- [ 1925.130000] [pm]platform wakeup, wakesource is:0x10
- [ 1925.140000] PM: early resume of devices complete after 1.348 msecs
- [ 1925.150000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1925.160000] [pm]platform wakeup finish
- [ 1925.160000] [sw_dmac_resume] enter
- [ 1925.160000] [NAND] nand_resume
- [ 1925.170000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:18:44
- [ 1925.170000] wakeup wake lock: alarm_rtc
- [ 1925.180000] [NAND] nand gpio_request
- [ 1925.180000] twi1, apb clock = 24000000
- [ 1925.190000] [i2c1] resume okay..
- [ 1925.190000] twi2, apb clock = 24000000
- [ 1925.190000] [i2c2] resume okay..
- [ 1925.200000] [sw_udc]: sw_udc_resume start
- [ 1925.200000] [sw_udc]: udc is disable, need not enter to resume
- [ 1925.210000] [sw_hcd0]: sw_hcd_resume start
- [ 1925.210000] wrn: hcd is disable, need not resume
- [ 1925.230000] wemac wemac.0: resetting device
- [ 1925.230000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 1925.240000] [sw-ehci1]: open clock
- [ 1925.260000] [sw-ehci1]: Set USB Power ON
- [ 1925.260000] [sw-ehci1]: lost power, restarting
- [ 1925.270000] usb usb2: root hub lost power or was reset
- [ 1925.420000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 1925.420000] [sw-ohci1]: open clock
- [ 1925.500000] usb usb3: root hub lost power or was reset
- [ 1925.740000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 1925.740000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 1925.750000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 1925.750000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:18:44
- [ 1925.760000] val = 0x62,pre_rest_vol = 98,rest_vol = 98
- [ 1925.770000] [AXP]=======================val = 0x0
- [ 1925.770000] pmu_resume_chgcur = 300000
- [ 1925.780000] [audio codec]:resume start
- [ 1925.780000] codec_resume_events,1271
- [ 1925.780000] [audio codec]:resume end
- [ 1925.790000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 1925.790000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 1925.800000] [mmc_pm]: No sdio card, please check your config !!
- [ 1925.800000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 1925.910000] [CSI]csi_resume
- [ 1925.910000] PM: resume of devices complete after 746.577 msecs
- [ 1925.910000] [pm]aw_pm_end!
- [ 1925.920000] PM: Finishing wakeup.
- [ 1925.920000] Restarting tasks ... done.
- [ 1925.950000] suspend: exit suspend, ret = 0 (2012-04-25 03:19:28.249134900 UTC)
- [ 1926.430000] ====pa turn on===
- [ 2036.170000] battery vol change: 98->97
- [ 2046.120000] [pm]valid
- [ 2046.120000] PM: Syncing filesystems ... done.
- [ 2046.130000] PM: Preparing system for mem sleep
- [ 2046.140000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 2046.210000] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 2046.240000] PM: Entering mem sleep
- [ 2046.240000] [pm]3 state begin
- [ 2046.250000] [CSI]csi_suspend
- [ 2046.250000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2046.260000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2046.270000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2046.270000] [audio codec]:suspend start5000
- [ 2046.940000] [audio codec]:suspend end
- [ 2046.940000] pmu_suspend_chgcur = 1000000
- [ 2046.950000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2046.960000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:20:45
- [ 2046.960000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2046.970000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:20:45
- [ 2046.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2046.980000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:20:45
- [ 2046.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2046.990000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:20:45
- [ 2047.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2047.000000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:20:45
- [ 2047.010000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2047.010000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2047.020000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2047.030000] [sw-ohci1]: close clock
- [ 2047.030000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2047.040000] [sw-ehci1]: Set USB Power OFF
- [ 2047.040000] [sw-ehci1]: close clock
- [ 2047.050000] [sw_hcd0]: sw_hcd_suspend start
- [ 2047.050000] wrn: hcd is disable, need not enter to suspend
- [ 2047.060000] [sw_udc]: sw_udc_suspend start
- [ 2047.060000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2047.070000] [i2c2] suspend okay..
- [ 2047.080000] [i2c1] suspend okay..
- [ 2047.080000] [NAND] nand_suspend
- [ 2047.080000] [NAND] nand_suspend ok
- [ 2047.090000] [sw_dmac_suspend] enter
- [ 2047.090000] PM: suspend of devices complete after 841.961 msecs
- [ 2047.100000] [pm]prepare
- [ 2047.100000] PM: late suspend of devices complete after 2.110 msecs
- [ 2047.110000] [pm]prepare_late
- [ 2047.110000] [pm]enter state 3
- [ 2047.110000] [pm]platform wakeup, wakesource is:0x10
- [ 2047.120000] PM: early resume of devices complete after 1.347 msecs
- [ 2047.130000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2047.140000] [pm]platform wakeup finish
- [ 2047.140000] [sw_dmac_resume] enter
- [ 2047.150000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:37
- [ 2047.150000] wakeup wake lock: alarm_rtc
- [ 2047.160000] [NAND] nand_resume
- [ 2047.160000] [NAND] nand gpio_request
- [ 2047.160000] twi1, apb clock = 24000000
- [ 2047.170000] [i2c1] resume okay..
- [ 2047.170000] twi2, apb clock = 24000000
- [ 2047.170000] [i2c2] resume okay..
- [ 2047.180000] [sw_udc]: sw_udc_resume start
- [ 2047.180000] [sw_udc]: udc is disable, need not enter to resume
- [ 2047.190000] [sw_hcd0]: sw_hcd_resume start
- [ 2047.190000] wrn: hcd is disable, need not resume
- [ 2047.220000] wemac wemac.0: resetting device
- [ 2047.220000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2047.230000] [sw-ehci1]: open clock
- [ 2047.250000] [sw-ehci1]: Set USB Power ON
- [ 2047.250000] [sw-ehci1]: lost power, restarting
- [ 2047.260000] usb usb2: root hub lost power or was reset
- [ 2047.410000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2047.410000] [sw-ohci1]: open clock
- [ 2047.490000] usb usb3: root hub lost power or was reset
- [ 2047.730000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2047.730000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2047.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2047.740000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:37
- [ 2047.750000] val = 0x62,pre_rest_vol = 97,rest_vol = 97
- [ 2047.760000] [AXP]=======================val = 0x0
- [ 2047.760000] pmu_resume_chgcur = 300000
- [ 2047.770000] [audio codec]:resume start
- [ 2047.770000] codec_resume_events,1271
- [ 2047.770000] [audio codec]:resume end
- [ 2047.780000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2047.780000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2047.790000] [mmc_pm]: No sdio card, please check your config !!
- [ 2047.790000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2047.900000] [CSI]csi_resume
- [ 2047.900000] PM: resume of devices complete after 755.769 msecs
- [ 2047.900000] [pm]aw_pm_end!
- [ 2047.910000] PM: Finishing wakeup.
- [ 2047.910000] Restarting tasks ... done.
- [ 2047.940000] suspend: exit suspend, ret = 0 (2012-04-25 03:24:21.504196880 UTC)
- [ 2048.420000] ====pa turn on===
- [ 2052.970000] [pm]valid
- [ 2052.970000] PM: Syncing filesystems ... done.
- [ 2052.980000] PM: Preparing system for mem sleep
- [ 2052.980000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 2053.010000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2053.030000] PM: Entering mem sleep
- [ 2053.030000] [pm]3 state begin
- [ 2053.030000] [CSI]csi_suspend
- [ 2053.040000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2053.040000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2053.050000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2053.060000] [audio codec]:suspend start5000
- [ 2053.710000] [audio codec]:suspend end
- [ 2053.710000] pmu_suspend_chgcur = 1000000
- [ 2053.720000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.720000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:43
- [ 2053.730000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.730000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:43
- [ 2053.740000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.740000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:43
- [ 2053.750000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.750000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:43
- [ 2053.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.760000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:23:43
- [ 2053.770000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2053.780000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2053.780000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2053.790000] [sw-ohci1]: close clock
- [ 2053.790000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2053.800000] [sw-ehci1]: Set USB Power OFF
- [ 2053.800000] [sw-ehci1]: close clock
- [ 2053.800000] [sw_hcd0]: sw_hcd_suspend start
- [ 2053.810000] wrn: hcd is disable, need not enter to suspend
- [ 2053.810000] [sw_udc]: sw_udc_suspend start
- [ 2053.820000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2053.820000] [i2c2] suspend okay..
- [ 2053.830000] [i2c1] suspend okay..
- [ 2053.830000] [NAND] nand_suspend
- [ 2053.830000] [NAND] nand_suspend ok
- [ 2053.840000] [sw_dmac_suspend] enter
- [ 2053.840000] PM: suspend of devices complete after 806.372 msecs
- [ 2053.850000] [pm]prepare
- [ 2053.850000] PM: late suspend of devices complete after 0.255 msecs
- [ 2053.860000] [pm]prepare_late
- [ 2053.860000] [pm]enter state 3
- [ 2053.860000] [pm]platform wakeup, wakesource is:0x10
- [ 2053.860000] PM: early resume of devices complete after 0.156 msecs
- [ 2053.870000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2053.880000] [pm]platform wakeup finish
- [ 2053.880000] [sw_dmac_resume] enter
- [ 2053.880000] [NAND] nand_resume
- [ 2053.890000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:41
- [ 2053.890000] wakeup wake lock: alarm_rtc
- [ 2053.900000] [NAND] nand gpio_request
- [ 2053.900000] twi1, apb clock = 24000000
- [ 2053.900000] [i2c1] resume okay..
- [ 2053.910000] twi2, apb clock = 24000000
- [ 2053.910000] [i2c2] resume okay..
- [ 2053.910000] [sw_udc]: sw_udc_resume start
- [ 2053.920000] [sw_udc]: udc is disable, need not enter to resume
- [ 2053.920000] [sw_hcd0]: sw_hcd_resume start
- [ 2053.930000] wrn: hcd is disable, need not resume
- [ 2053.950000] wemac wemac.0: resetting device
- [ 2053.950000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2053.960000] [sw-ehci1]: open clock
- [ 2053.980000] [sw-ehci1]: Set USB Power ON
- [ 2053.980000] [sw-ehci1]: lost power, restarting
- [ 2053.990000] usb usb2: root hub lost power or was reset
- [ 2054.140000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2054.140000] [sw-ohci1]: open clock
- [ 2054.220000] usb usb3: root hub lost power or was reset
- [ 2054.460000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2054.460000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2054.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2054.470000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:41
- [ 2054.480000] val = 0x62,pre_rest_vol = 97,rest_vol = 97
- [ 2054.490000] [AXP]=======================val = 0x0
- [ 2054.490000] pmu_resume_chgcur = 300000
- [ 2054.500000] [audio codec]:resume start
- [ 2054.500000] codec_resume_events,1271
- [ 2054.500000] [audio codec]:resume end
- [ 2054.510000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2054.510000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2054.520000] [mmc_pm]: No sdio card, please check your config !!
- [ 2054.520000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2054.630000] [CSI]csi_resume
- [ 2054.630000] PM: resume of devices complete after 748.664 msecs
- [ 2054.630000] [pm]aw_pm_end!
- [ 2054.640000] PM: Finishing wakeup.
- [ 2054.640000] Restarting tasks ... done.
- [ 2054.690000] suspend: exit suspend, ret = 0 (2012-04-25 03:29:25.557167268 UTC)
- [ 2055.150000] ====pa turn on===
- [ 2059.690000] [pm]valid
- [ 2059.690000] PM: Syncing filesystems ... done.
- [ 2059.690000] PM: Preparing system for mem sleep
- [ 2059.700000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2059.730000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2059.750000] PM: Entering mem sleep
- [ 2059.750000] [pm]3 state begin
- [ 2059.750000] [CSI]csi_suspend
- [ 2059.760000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2059.760000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2059.770000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2059.780000] [audio codec]:suspend start5000
- [ 2060.430000] [audio codec]:suspend end
- [ 2060.430000] pmu_suspend_chgcur = 1000000
- [ 2060.440000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.440000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:47
- [ 2060.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.450000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:47
- [ 2060.460000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.460000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:47
- [ 2060.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.470000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:47
- [ 2060.480000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.480000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:28:47
- [ 2060.490000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2060.500000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2060.500000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2060.510000] [sw-ohci1]: close clock
- [ 2060.510000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2060.520000] [sw-ehci1]: Set USB Power OFF
- [ 2060.520000] [sw-ehci1]: close clock
- [ 2060.520000] [sw_hcd0]: sw_hcd_suspend start
- [ 2060.530000] wrn: hcd is disable, need not enter to suspend
- [ 2060.530000] [sw_udc]: sw_udc_suspend start
- [ 2060.540000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2060.540000] [i2c2] suspend okay..
- [ 2060.550000] [i2c1] suspend okay..
- [ 2060.550000] [NAND] nand_suspend
- [ 2060.550000] [NAND] nand_suspend ok
- [ 2060.560000] [sw_dmac_suspend] enter
- [ 2060.560000] PM: suspend of devices complete after 806.438 msecs
- [ 2060.570000] [pm]prepare
- [ 2060.570000] PM: late suspend of devices complete after 0.249 msecs
- [ 2060.580000] [pm]prepare_late
- [ 2060.580000] [pm]enter state 3
- [ 2060.580000] [pm]platform wakeup, wakesource is:0x10
- [ 2060.580000] PM: early resume of devices complete after 0.151 msecs
- [ 2060.590000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2060.600000] [pm]platform wakeup finish
- [ 2060.600000] [sw_dmac_resume] enter
- [ 2060.600000] [NAND] nand_resume
- [ 2060.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:38:44
- [ 2060.610000] wakeup wake lock: alarm_rtc
- [ 2060.620000] [NAND] nand gpio_request
- [ 2060.620000] twi1, apb clock = 24000000
- [ 2060.620000] [i2c1] resume okay..
- [ 2060.630000] twi2, apb clock = 24000000
- [ 2060.630000] [i2c2] resume okay..
- [ 2060.630000] [sw_udc]: sw_udc_resume start
- [ 2060.640000] [sw_udc]: udc is disable, need not enter to resume
- [ 2060.640000] [sw_hcd0]: sw_hcd_resume start
- [ 2060.650000] wrn: hcd is disable, need not resume
- [ 2060.670000] wemac wemac.0: resetting device
- [ 2060.670000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2060.680000] [sw-ehci1]: open clock
- [ 2060.700000] [sw-ehci1]: Set USB Power ON
- [ 2060.700000] [sw-ehci1]: lost power, restarting
- [ 2060.710000] usb usb2: root hub lost power or was reset
- [ 2060.860000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2060.860000] [sw-ohci1]: open clock
- [ 2060.940000] usb usb3: root hub lost power or was reset
- [ 2061.180000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2061.180000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2061.190000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2061.190000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:38:44
- [ 2061.200000] val = 0x62,pre_rest_vol = 97,rest_vol = 97
- [ 2061.210000] [AXP]=======================val = 0x0
- [ 2061.210000] pmu_resume_chgcur = 300000
- [ 2061.220000] [audio codec]:resume start
- [ 2061.220000] codec_resume_events,1271
- [ 2061.220000] [audio codec]:resume end
- [ 2061.230000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2061.230000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2061.240000] [mmc_pm]: No sdio card, please check your config !!
- [ 2061.240000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2061.350000] [CSI]csi_resume
- [ 2061.350000] PM: resume of devices complete after 748.594 msecs
- [ 2061.350000] [pm]aw_pm_end!
- [ 2061.360000] PM: Finishing wakeup.
- [ 2061.360000] Restarting tasks ... done.
- [ 2061.420000] suspend: exit suspend, ret = 0 (2012-04-25 03:39:28.593768696 UTC)
- [ 2061.870000] ====pa turn on===
- [ 2181.540000] [pm]valid
- [ 2181.540000] PM: Syncing filesystems ... done.
- [ 2181.580000] PM: Preparing system for mem sleep
- [ 2181.580000] Freezing user space processes ... battery vol change: 97->96
- [ 2181.660000] (elapsed 0.06 seconds) done.
- [ 2181.660000] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 2181.690000] PM: Entering mem sleep
- [ 2181.690000] [pm]3 state begin
- [ 2181.700000] [CSI]csi_suspend
- [ 2181.700000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2181.710000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2181.720000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2181.720000] [audio codec]:suspend start5000
- [ 2182.390000] [audio codec]:suspend end
- [ 2182.390000] pmu_suspend_chgcur = 1000000
- [ 2182.400000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.410000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:40:45
- [ 2182.410000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.420000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:40:45
- [ 2182.420000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.430000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:40:45
- [ 2182.430000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.440000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:40:45
- [ 2182.450000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.450000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:40:45
- [ 2182.460000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2182.460000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2182.470000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2182.480000] [sw-ohci1]: close clock
- [ 2182.480000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2182.490000] [sw-ehci1]: Set USB Power OFF
- [ 2182.490000] [sw-ehci1]: close clock
- [ 2182.500000] [sw_hcd0]: sw_hcd_suspend start
- [ 2182.500000] wrn: hcd is disable, need not enter to suspend
- [ 2182.510000] [sw_udc]: sw_udc_suspend start
- [ 2182.510000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2182.520000] [i2c2] suspend okay..
- [ 2182.530000] [i2c1] suspend okay..
- [ 2182.530000] [NAND] nand_suspend
- [ 2182.530000] [NAND] nand_suspend ok
- [ 2182.540000] [sw_dmac_suspend] enter
- [ 2182.540000] PM: suspend of devices complete after 840.990 msecs
- [ 2182.550000] [pm]prepare
- [ 2182.550000] PM: late suspend of devices complete after 2.098 msecs
- [ 2182.560000] [pm]prepare_late
- [ 2182.560000] [pm]enter state 3
- [ 2182.560000] [pm]platform wakeup, wakesource is:0x10
- [ 2182.570000] PM: early resume of devices complete after 1.341 msecs
- [ 2182.580000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2182.590000] [pm]platform wakeup finish
- [ 2182.590000] [sw_dmac_resume] enter
- [ 2182.590000] [NAND] nand_resume
- [ 2182.600000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:38
- [ 2182.600000] wakeup wake lock: alarm_rtc
- [ 2182.610000] [NAND] nand gpio_request
- [ 2182.610000] twi1, apb clock = 24000000
- [ 2182.610000] [i2c1] resume okay..
- [ 2182.620000] twi2, apb clock = 24000000
- [ 2182.620000] [i2c2] resume okay..
- [ 2182.630000] [sw_udc]: sw_udc_resume start
- [ 2182.630000] [sw_udc]: udc is disable, need not enter to resume
- [ 2182.640000] [sw_hcd0]: sw_hcd_resume start
- [ 2182.640000] wrn: hcd is disable, need not resume
- [ 2182.660000] wemac wemac.0: resetting device
- [ 2182.660000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2182.670000] [sw-ehci1]: open clock
- [ 2182.690000] [sw-ehci1]: Set USB Power ON
- [ 2182.690000] [sw-ehci1]: lost power, restarting
- [ 2182.700000] usb usb2: root hub lost power or was reset
- [ 2182.850000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2182.850000] [sw-ohci1]: open clock
- [ 2182.930000] usb usb3: root hub lost power or was reset
- [ 2183.170000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2183.170000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2183.180000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2183.180000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:38
- [ 2183.190000] val = 0x62,pre_rest_vol = 96,rest_vol = 96
- [ 2183.200000] [AXP]=======================val = 0x0
- [ 2183.200000] pmu_resume_chgcur = 300000
- [ 2183.210000] [audio codec]:resume start
- [ 2183.210000] codec_resume_events,1271
- [ 2183.210000] [audio codec]:resume end
- [ 2183.220000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2183.220000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2183.230000] [mmc_pm]: No sdio card, please check your config !!
- [ 2183.230000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2183.340000] [CSI]csi_resume
- [ 2183.340000] PM: resume of devices complete after 746.892 msecs
- [ 2183.340000] [pm]aw_pm_end!
- [ 2183.350000] PM: Finishing wakeup.
- [ 2183.350000] Restarting tasks ... done.
- [ 2183.390000] suspend: exit suspend, ret = 0 (2012-04-25 03:54:22.839187264 UTC)
- [ 2183.390000] active wake lock PowerManagerService
- [ 2183.390000] active wake lock unknown_wakeups, time left 500
- [ 2183.860000] ====pa turn on===
- [ 2188.410000] [pm]valid
- [ 2188.420000] PM: Syncing filesystems ... done.
- [ 2188.420000] PM: Preparing system for mem sleep
- [ 2188.430000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2188.460000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2188.480000] PM: Entering mem sleep
- [ 2188.480000] [pm]3 state begin
- [ 2188.480000] [CSI]csi_suspend
- [ 2188.490000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2188.490000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2188.500000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2188.510000] [audio codec]:suspend start5000
- [ 2189.160000] [audio codec]:suspend end
- [ 2189.160000] pmu_suspend_chgcur = 1000000
- [ 2189.170000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.170000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:44
- [ 2189.180000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.180000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:44
- [ 2189.190000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.190000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:44
- [ 2189.200000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.210000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:44
- [ 2189.210000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.220000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:53:44
- [ 2189.220000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2189.230000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2189.230000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2189.240000] [sw-ohci1]: close clock
- [ 2189.240000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2189.250000] [sw-ehci1]: Set USB Power OFF
- [ 2189.250000] [sw-ehci1]: close clock
- [ 2189.260000] [sw_hcd0]: sw_hcd_suspend start
- [ 2189.260000] wrn: hcd is disable, need not enter to suspend
- [ 2189.260000] [sw_udc]: sw_udc_suspend start
- [ 2189.270000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2189.280000] [i2c2] suspend okay..
- [ 2189.280000] [i2c1] suspend okay..
- [ 2189.280000] [NAND] nand_suspend
- [ 2189.290000] [NAND] nand_suspend ok
- [ 2189.290000] [sw_dmac_suspend] enter
- [ 2189.290000] PM: suspend of devices complete after 807.586 msecs
- [ 2189.300000] [pm]prepare
- [ 2189.300000] PM: late suspend of devices complete after 0.259 msecs
- [ 2189.310000] [pm]prepare_late
- [ 2189.310000] [pm]enter state 3
- [ 2189.310000] [pm]platform wakeup, wakesource is:0x10
- [ 2189.320000] PM: early resume of devices complete after 0.157 msecs
- [ 2189.320000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.330000] [pm]platform wakeup finish
- [ 2189.330000] [sw_dmac_resume] enter
- [ 2189.340000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:41
- [ 2189.340000] wakeup wake lock: alarm_rtc
- [ 2189.340000] [NAND] nand_resume
- [ 2189.350000] [NAND] nand gpio_request
- [ 2189.350000] twi1, apb clock = 24000000
- [ 2189.360000] [i2c1] resume okay..
- [ 2189.360000] twi2, apb clock = 24000000
- [ 2189.360000] [i2c2] resume okay..
- [ 2189.370000] [sw_udc]: sw_udc_resume start
- [ 2189.370000] [sw_udc]: udc is disable, need not enter to resume
- [ 2189.380000] [sw_hcd0]: sw_hcd_resume start
- [ 2189.380000] wrn: hcd is disable, need not resume
- [ 2189.400000] wemac wemac.0: resetting device
- [ 2189.400000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2189.410000] [sw-ehci1]: open clock
- [ 2189.430000] [sw-ehci1]: Set USB Power ON
- [ 2189.430000] [sw-ehci1]: lost power, restarting
- [ 2189.440000] usb usb2: root hub lost power or was reset
- [ 2189.590000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2189.590000] [sw-ohci1]: open clock
- [ 2189.670000] usb usb3: root hub lost power or was reset
- [ 2189.910000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2189.910000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2189.920000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2189.920000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:41
- [ 2189.930000] val = 0x61,pre_rest_vol = 96,rest_vol = 96
- [ 2189.940000] [AXP]=======================val = 0x0
- [ 2189.940000] pmu_resume_chgcur = 300000
- [ 2189.950000] [audio codec]:resume start
- [ 2189.950000] codec_resume_events,1271
- [ 2189.950000] [audio codec]:resume end
- [ 2189.960000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2189.960000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2189.970000] [mmc_pm]: No sdio card, please check your config !!
- [ 2189.970000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2190.080000] [CSI]csi_resume
- [ 2190.080000] PM: resume of devices complete after 747.564 msecs
- [ 2190.080000] [pm]aw_pm_end!
- [ 2190.090000] PM: Finishing wakeup.
- [ 2190.090000] Restarting tasks ... done.
- [ 2190.150000] suspend: exit suspend, ret = 0 (2012-04-25 03:59:25.907386772 UTC)
- [ 2190.180000] active wake lock unknown_wakeups, time left 499
- [ 2190.600000] ====pa turn on===
- [ 2195.180000] [pm]valid
- [ 2195.180000] PM: Syncing filesystems ... done.
- [ 2195.180000] PM: Preparing system for mem sleep
- [ 2195.190000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2195.220000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2195.240000] PM: Entering mem sleep
- [ 2195.240000] [pm]3 state begin
- [ 2195.240000] [CSI]csi_suspend
- [ 2195.250000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2195.250000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2195.260000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2195.270000] [audio codec]:suspend start5000
- [ 2195.920000] [audio codec]:suspend end
- [ 2195.920000] pmu_suspend_chgcur = 1000000
- [ 2195.930000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2195.930000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:47
- [ 2195.940000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2195.940000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:47
- [ 2195.950000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2195.950000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:47
- [ 2195.960000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2195.960000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:47
- [ 2195.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2195.970000] sunxi-rtc sunxi-rtc: read time 2012-4-25 3:58:47
- [ 2195.980000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2195.990000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2195.990000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2196.000000] [sw-ohci1]: close clock
- [ 2196.000000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2196.010000] [sw-ehci1]: Set USB Power OFF
- [ 2196.010000] [sw-ehci1]: close clock
- [ 2196.010000] [sw_hcd0]: sw_hcd_suspend start
- [ 2196.020000] wrn: hcd is disable, need not enter to suspend
- [ 2196.020000] [sw_udc]: sw_udc_suspend start
- [ 2196.030000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2196.030000] [i2c2] suspend okay..
- [ 2196.040000] [i2c1] suspend okay..
- [ 2196.040000] [NAND] nand_suspend
- [ 2196.040000] [NAND] nand_suspend ok
- [ 2196.050000] [sw_dmac_suspend] enter
- [ 2196.050000] PM: suspend of devices complete after 806.375 msecs
- [ 2196.060000] [pm]prepare
- [ 2196.060000] PM: late suspend of devices complete after 0.249 msecs
- [ 2196.070000] [pm]prepare_late
- [ 2196.070000] [pm]enter state 3
- [ 2196.070000] [pm]platform wakeup, wakesource is:0x10
- [ 2196.070000] PM: early resume of devices complete after 0.153 msecs
- [ 2196.080000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2196.090000] [pm]platform wakeup finish
- [ 2196.090000] [sw_dmac_resume] enter
- [ 2196.090000] [NAND] nand_resume
- [ 2196.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:18:44
- [ 2196.100000] wakeup wake lock: alarm_rtc
- [ 2196.110000] [NAND] nand gpio_request
- [ 2196.110000] twi1, apb clock = 24000000
- [ 2196.110000] [i2c1] resume okay..
- [ 2196.120000] twi2, apb clock = 24000000
- [ 2196.120000] [i2c2] resume okay..
- [ 2196.120000] [sw_udc]: sw_udc_resume start
- [ 2196.130000] [sw_udc]: udc is disable, need not enter to resume
- [ 2196.130000] [sw_hcd0]: sw_hcd_resume start
- [ 2196.140000] wrn: hcd is disable, need not resume
- [ 2196.160000] wemac wemac.0: resetting device
- [ 2196.160000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2196.170000] [sw-ehci1]: open clock
- [ 2196.190000] [sw-ehci1]: Set USB Power ON
- [ 2196.190000] [sw-ehci1]: lost power, restarting
- [ 2196.200000] usb usb2: root hub lost power or was reset
- [ 2196.350000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2196.350000] [sw-ohci1]: open clock
- [ 2196.430000] usb usb3: root hub lost power or was reset
- [ 2196.670000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2196.670000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2196.680000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2196.680000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:18:44
- [ 2196.690000] val = 0x62,pre_rest_vol = 96,rest_vol = 98
- [ 2196.700000] battery vol change: 96->98
- [ 2196.700000] [AXP]=======================val = 0x0
- [ 2196.710000] pmu_resume_chgcur = 300000
- [ 2196.710000] [audio codec]:resume start
- [ 2196.710000] codec_resume_events,1271
- [ 2196.720000] [audio codec]:resume end
- [ 2196.720000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2196.730000] [mmc_pm]: No sdio card, please check your config !!
- [ 2196.730000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2196.740000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2196.840000] [CSI]csi_resume
- [ 2196.840000] PM: resume of devices complete after 748.672 msecs
- [ 2196.840000] [pm]aw_pm_end!
- [ 2196.850000] PM: Finishing wakeup.
- [ 2196.850000] Restarting tasks ... done.
- [ 2196.910000] suspend: exit suspend, ret = 0 (2012-04-25 04:19:28.964088645 UTC)
- [ 2197.380000] ====pa turn on===
- [ 2256.890000] battery vol change: 98->97
- [ 2297.050000] battery vol change: 97->96
- [ 2317.140000] [pm]valid
- [ 2317.140000] PM: Syncing filesystems ... done.
- [ 2317.160000] PM: Preparing system for mem sleep
- [ 2317.170000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 2317.240000] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 2317.270000] PM: Entering mem sleep
- [ 2317.270000] [pm]3 state begin
- [ 2317.280000] [CSI]csi_suspend
- [ 2317.280000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2317.290000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2317.300000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2317.300000] [audio codec]:suspend start5000
- [ 2317.970000] [audio codec]:suspend end
- [ 2317.970000] pmu_suspend_chgcur = 1000000
- [ 2317.980000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2317.990000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:20:45
- [ 2317.990000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.000000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:20:46
- [ 2318.000000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.010000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:20:46
- [ 2318.010000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.020000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:20:46
- [ 2318.030000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.030000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:20:46
- [ 2318.040000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2318.040000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2318.050000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2318.060000] [sw-ohci1]: close clock
- [ 2318.060000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2318.070000] [sw-ehci1]: Set USB Power OFF
- [ 2318.070000] [sw-ehci1]: close clock
- [ 2318.080000] [sw_hcd0]: sw_hcd_suspend start
- [ 2318.080000] wrn: hcd is disable, need not enter to suspend
- [ 2318.090000] [sw_udc]: sw_udc_suspend start
- [ 2318.090000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2318.100000] [i2c2] suspend okay..
- [ 2318.110000] [i2c1] suspend okay..
- [ 2318.110000] [NAND] nand_suspend
- [ 2318.110000] [NAND] nand_suspend ok
- [ 2318.120000] [sw_dmac_suspend] enter
- [ 2318.120000] PM: suspend of devices complete after 841.328 msecs
- [ 2318.130000] [pm]prepare
- [ 2318.130000] PM: late suspend of devices complete after 2.097 msecs
- [ 2318.140000] [pm]prepare_late
- [ 2318.140000] [pm]enter state 3
- [ 2318.140000] [pm]platform wakeup, wakesource is:0x10
- [ 2318.150000] PM: early resume of devices complete after 1.353 msecs
- [ 2318.160000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.170000] [pm]platform wakeup finish
- [ 2318.170000] [sw_dmac_resume] enter
- [ 2318.180000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:38
- [ 2318.180000] wakeup wake lock: alarm_rtc
- [ 2318.180000] [NAND] nand_resume
- [ 2318.190000] [NAND] nand gpio_request
- [ 2318.190000] twi1, apb clock = 24000000
- [ 2318.200000] [i2c1] resume okay..
- [ 2318.200000] twi2, apb clock = 24000000
- [ 2318.200000] [i2c2] resume okay..
- [ 2318.210000] [sw_udc]: sw_udc_resume start
- [ 2318.210000] [sw_udc]: udc is disable, need not enter to resume
- [ 2318.220000] [sw_hcd0]: sw_hcd_resume start
- [ 2318.220000] wrn: hcd is disable, need not resume
- [ 2318.240000] wemac wemac.0: resetting device
- [ 2318.240000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2318.250000] [sw-ehci1]: open clock
- [ 2318.270000] [sw-ehci1]: Set USB Power ON
- [ 2318.270000] [sw-ehci1]: lost power, restarting
- [ 2318.280000] usb usb2: root hub lost power or was reset
- [ 2318.430000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2318.430000] [sw-ohci1]: open clock
- [ 2318.510000] usb usb3: root hub lost power or was reset
- [ 2318.750000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2318.750000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2318.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2318.760000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:38
- [ 2318.770000] val = 0x61,pre_rest_vol = 96,rest_vol = 96
- [ 2318.780000] [AXP]=======================val = 0x0
- [ 2318.780000] pmu_resume_chgcur = 300000
- [ 2318.790000] [audio codec]:resume start
- [ 2318.790000] codec_resume_events,1271
- [ 2318.790000] [audio codec]:resume end
- [ 2318.800000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2318.800000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2318.810000] [mmc_pm]: No sdio card, please check your config !!
- [ 2318.810000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2318.920000] [CSI]csi_resume
- [ 2318.920000] PM: resume of devices complete after 746.486 msecs
- [ 2318.920000] [pm]aw_pm_end!
- [ 2318.930000] PM: Finishing wakeup.
- [ 2318.930000] Restarting tasks ... done.
- [ 2318.980000] suspend: exit suspend, ret = 0 (2012-04-25 04:24:22.312317998 UTC)
- [ 2319.440000] ====pa turn on===
- [ 2324.010000] [pm]valid
- [ 2324.010000] PM: Syncing filesystems ... done.
- [ 2324.020000] PM: Preparing system for mem sleep
- [ 2324.020000] Freezing user space processes ... (elapsed 0.01 seconds) done.
- [ 2324.050000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2324.070000] PM: Entering mem sleep
- [ 2324.070000] [pm]3 state begin
- [ 2324.070000] [CSI]csi_suspend
- [ 2324.080000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2324.080000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2324.090000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2324.100000] [audio codec]:suspend start5000
- [ 2324.750000] [audio codec]:suspend end
- [ 2324.750000] pmu_suspend_chgcur = 1000000
- [ 2324.760000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.760000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:44
- [ 2324.770000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.770000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:44
- [ 2324.780000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.780000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:44
- [ 2324.790000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.790000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:44
- [ 2324.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.800000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:23:44
- [ 2324.810000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2324.820000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2324.820000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2324.830000] [sw-ohci1]: close clock
- [ 2324.830000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2324.840000] [sw-ehci1]: Set USB Power OFF
- [ 2324.840000] [sw-ehci1]: close clock
- [ 2324.840000] [sw_hcd0]: sw_hcd_suspend start
- [ 2324.850000] wrn: hcd is disable, need not enter to suspend
- [ 2324.850000] [sw_udc]: sw_udc_suspend start
- [ 2324.860000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2324.860000] [i2c2] suspend okay..
- [ 2324.870000] [i2c1] suspend okay..
- [ 2324.870000] [NAND] nand_suspend
- [ 2324.870000] [NAND] nand_suspend ok
- [ 2324.880000] [sw_dmac_suspend] enter
- [ 2324.880000] PM: suspend of devices complete after 806.397 msecs
- [ 2324.890000] [pm]prepare
- [ 2324.890000] PM: late suspend of devices complete after 0.256 msecs
- [ 2324.900000] [pm]prepare_late
- [ 2324.900000] [pm]enter state 3
- [ 2324.900000] [pm]platform wakeup, wakesource is:0x10
- [ 2324.900000] PM: early resume of devices complete after 0.154 msecs
- [ 2324.910000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2324.920000] [pm]platform wakeup finish
- [ 2324.920000] [sw_dmac_resume] enter
- [ 2324.920000] [NAND] nand_resume
- [ 2324.930000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:41
- [ 2324.930000] wakeup wake lock: alarm_rtc
- [ 2324.940000] [NAND] nand gpio_request
- [ 2324.940000] twi1, apb clock = 24000000
- [ 2324.940000] [i2c1] resume okay..
- [ 2324.950000] twi2, apb clock = 24000000
- [ 2324.950000] [i2c2] resume okay..
- [ 2324.950000] [sw_udc]: sw_udc_resume start
- [ 2324.960000] [sw_udc]: udc is disable, need not enter to resume
- [ 2324.960000] [sw_hcd0]: sw_hcd_resume start
- [ 2324.970000] wrn: hcd is disable, need not resume
- [ 2324.990000] wemac wemac.0: resetting device
- [ 2324.990000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2325.000000] [sw-ehci1]: open clock
- [ 2325.020000] [sw-ehci1]: Set USB Power ON
- [ 2325.020000] [sw-ehci1]: lost power, restarting
- [ 2325.030000] usb usb2: root hub lost power or was reset
- [ 2325.180000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2325.180000] [sw-ohci1]: open clock
- [ 2325.260000] usb usb3: root hub lost power or was reset
- [ 2325.500000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2325.500000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2325.510000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2325.510000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:41
- [ 2325.520000] val = 0x61,pre_rest_vol = 96,rest_vol = 96
- [ 2325.530000] [AXP]=======================val = 0x0
- [ 2325.530000] pmu_resume_chgcur = 300000
- [ 2325.540000] [audio codec]:resume start
- [ 2325.540000] codec_resume_events,1271
- [ 2325.540000] [audio codec]:resume end
- [ 2325.550000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2325.550000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2325.560000] [mmc_pm]: No sdio card, please check your config !!
- [ 2325.560000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2325.670000] [CSI]csi_resume
- [ 2325.670000] PM: resume of devices complete after 748.655 msecs
- [ 2325.670000] [pm]aw_pm_end!
- [ 2325.680000] PM: Finishing wakeup.
- [ 2325.680000] Restarting tasks ... done.
- [ 2325.730000] suspend: exit suspend, ret = 0 (2012-04-25 04:29:25.368726912 UTC)
- [ 2325.760000] active wake lock unknown_wakeups, time left 500
- [ 2326.190000] ====pa turn on===
- [ 2330.760000] [pm]valid
- [ 2330.760000] PM: Syncing filesystems ... done.
- [ 2330.760000] PM: Preparing system for mem sleep
- [ 2330.770000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2330.800000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2330.820000] PM: Entering mem sleep
- [ 2330.820000] [pm]3 state begin
- [ 2330.820000] [CSI]csi_suspend
- [ 2330.830000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2330.830000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2330.840000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2330.850000] [audio codec]:suspend start5000
- [ 2331.500000] [audio codec]:suspend end
- [ 2331.500000] pmu_suspend_chgcur = 1000000
- [ 2331.510000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.510000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:47
- [ 2331.520000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.520000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:47
- [ 2331.530000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.530000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:47
- [ 2331.540000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.550000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:47
- [ 2331.550000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.560000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:28:47
- [ 2331.560000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2331.570000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2331.570000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2331.580000] [sw-ohci1]: close clock
- [ 2331.580000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2331.590000] [sw-ehci1]: Set USB Power OFF
- [ 2331.590000] [sw-ehci1]: close clock
- [ 2331.600000] [sw_hcd0]: sw_hcd_suspend start
- [ 2331.600000] wrn: hcd is disable, need not enter to suspend
- [ 2331.600000] [sw_udc]: sw_udc_suspend start
- [ 2331.610000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2331.620000] [i2c2] suspend okay..
- [ 2331.620000] [i2c1] suspend okay..
- [ 2331.620000] [NAND] nand_suspend
- [ 2331.630000] [NAND] nand_suspend ok
- [ 2331.630000] [sw_dmac_suspend] enter
- [ 2331.630000] PM: suspend of devices complete after 807.526 msecs
- [ 2331.640000] [pm]prepare
- [ 2331.640000] PM: late suspend of devices complete after 0.255 msecs
- [ 2331.650000] [pm]prepare_late
- [ 2331.650000] [pm]enter state 3
- [ 2331.650000] [pm]platform wakeup, wakesource is:0x10
- [ 2331.660000] PM: early resume of devices complete after 0.155 msecs
- [ 2331.660000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2331.670000] [pm]platform wakeup finish
- [ 2331.670000] [sw_dmac_resume] enter
- [ 2331.680000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:39
- [ 2331.680000] wakeup wake lock: alarm_rtc
- [ 2331.680000] [NAND] nand_resume
- [ 2331.690000] [NAND] nand gpio_request
- [ 2331.690000] twi1, apb clock = 24000000
- [ 2331.700000] [i2c1] resume okay..
- [ 2331.700000] twi2, apb clock = 24000000
- [ 2331.700000] [i2c2] resume okay..
- [ 2331.710000] [sw_udc]: sw_udc_resume start
- [ 2331.710000] [sw_udc]: udc is disable, need not enter to resume
- [ 2331.720000] [sw_hcd0]: sw_hcd_resume start
- [ 2331.720000] wrn: hcd is disable, need not resume
- [ 2331.740000] wemac wemac.0: resetting device
- [ 2331.740000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2331.750000] [sw-ehci1]: open clock
- [ 2331.770000] [sw-ehci1]: Set USB Power ON
- [ 2331.770000] [sw-ehci1]: lost power, restarting
- [ 2331.780000] usb usb2: root hub lost power or was reset
- [ 2331.930000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2331.930000] [sw-ohci1]: open clock
- [ 2332.010000] usb usb3: root hub lost power or was reset
- [ 2332.250000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2332.250000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2332.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2332.260000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:39
- [ 2332.270000] val = 0x60,pre_rest_vol = 96,rest_vol = 96
- [ 2332.280000] [AXP]=======================val = 0x0
- [ 2332.280000] pmu_resume_chgcur = 300000
- [ 2332.290000] [audio codec]:resume start
- [ 2332.290000] codec_resume_events,1271
- [ 2332.290000] [audio codec]:resume end
- [ 2332.300000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2332.300000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2332.310000] [mmc_pm]: No sdio card, please check your config !!
- [ 2332.310000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2332.420000] [CSI]csi_resume
- [ 2332.420000] PM: resume of devices complete after 747.599 msecs
- [ 2332.420000] [pm]aw_pm_end!
- [ 2332.430000] PM: Finishing wakeup.
- [ 2332.430000] Restarting tasks ... done.
- [ 2332.500000] suspend: exit suspend, ret = 0 (2012-04-25 04:54:23.444306151 UTC)
- [ 2332.940000] ====pa turn on===
- [ 2337.570000] [pm]valid
- [ 2337.570000] PM: Syncing filesystems ... done.
- [ 2337.580000] PM: Preparing system for mem sleep
- [ 2337.580000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2337.610000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2337.630000] PM: Entering mem sleep
- [ 2337.630000] [pm]3 state begin
- [ 2337.630000] [CSI]csi_suspend
- [ 2337.640000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2337.640000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2337.650000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2337.660000] [audio codec]:suspend start5000
- [ 2338.310000] [audio codec]:suspend end
- [ 2338.310000] pmu_suspend_chgcur = 1000000
- [ 2338.320000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.320000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:45
- [ 2338.330000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.330000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:45
- [ 2338.340000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.340000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:45
- [ 2338.350000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.350000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:45
- [ 2338.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:53:45
- [ 2338.370000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2338.380000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2338.380000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2338.390000] [sw-ohci1]: close clock
- [ 2338.390000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2338.400000] [sw-ehci1]: Set USB Power OFF
- [ 2338.400000] [sw-ehci1]: close clock
- [ 2338.400000] [sw_hcd0]: sw_hcd_suspend start
- [ 2338.410000] wrn: hcd is disable, need not enter to suspend
- [ 2338.410000] [sw_udc]: sw_udc_suspend start
- [ 2338.420000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2338.420000] [i2c2] suspend okay..
- [ 2338.430000] [i2c1] suspend okay..
- [ 2338.430000] [NAND] nand_suspend
- [ 2338.430000] [NAND] nand_suspend ok
- [ 2338.440000] [sw_dmac_suspend] enter
- [ 2338.440000] PM: suspend of devices complete after 806.388 msecs
- [ 2338.450000] [pm]prepare
- [ 2338.450000] PM: late suspend of devices complete after 0.260 msecs
- [ 2338.460000] [pm]prepare_late
- [ 2338.460000] [pm]enter state 3
- [ 2338.460000] [pm]platform wakeup, wakesource is:0x10
- [ 2338.460000] PM: early resume of devices complete after 0.156 msecs
- [ 2338.470000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2338.480000] [pm]platform wakeup finish
- [ 2338.480000] [sw_dmac_resume] enter
- [ 2338.480000] [NAND] nand_resume
- [ 2338.490000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:58:41
- [ 2338.490000] wakeup wake lock: alarm_rtc
- [ 2338.500000] [NAND] nand gpio_request
- [ 2338.500000] twi1, apb clock = 24000000
- [ 2338.500000] [i2c1] resume okay..
- [ 2338.510000] twi2, apb clock = 24000000
- [ 2338.510000] [i2c2] resume okay..
- [ 2338.510000] [sw_udc]: sw_udc_resume start
- [ 2338.520000] [sw_udc]: udc is disable, need not enter to resume
- [ 2338.520000] [sw_hcd0]: sw_hcd_resume start
- [ 2338.530000] wrn: hcd is disable, need not resume
- [ 2338.550000] wemac wemac.0: resetting device
- [ 2338.550000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2338.560000] [sw-ehci1]: open clock
- [ 2338.580000] [sw-ehci1]: Set USB Power ON
- [ 2338.580000] [sw-ehci1]: lost power, restarting
- [ 2338.590000] usb usb2: root hub lost power or was reset
- [ 2338.740000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2338.740000] [sw-ohci1]: open clock
- [ 2338.820000] usb usb3: root hub lost power or was reset
- [ 2339.060000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2339.060000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2339.070000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2339.070000] sunxi-rtc sunxi-rtc: read time 2012-4-25 4:58:41
- [ 2339.080000] val = 0x61,pre_rest_vol = 96,rest_vol = 96
- [ 2339.090000] [AXP]=======================val = 0x0
- [ 2339.090000] pmu_resume_chgcur = 300000
- [ 2339.100000] [audio codec]:resume start
- [ 2339.100000] codec_resume_events,1271
- [ 2339.100000] [audio codec]:resume end
- [ 2339.110000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2339.110000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2339.120000] [mmc_pm]: No sdio card, please check your config !!
- [ 2339.120000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2339.230000] [CSI]csi_resume
- [ 2339.230000] PM: resume of devices complete after 748.644 msecs
- [ 2339.230000] [pm]aw_pm_end!
- [ 2339.240000] PM: Finishing wakeup.
- [ 2339.240000] Restarting tasks ... done.
- [ 2339.300000] suspend: exit suspend, ret = 0 (2012-04-25 04:59:25.539282624 UTC)
- [ 2339.750000] ====pa turn on===
- [ 2419.370000] battery vol change: 96->95
- [ 2461.930000] [pm]valid
- [ 2461.930000] PM: Syncing filesystems ... done.
- [ 2461.950000] PM: Preparing system for mem sleep
- [ 2461.970000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 2462.040000] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- [ 2462.070000] PM: Entering mem sleep
- [ 2462.070000] [pm]3 state begin
- [ 2462.080000] [CSI]csi_suspend
- [ 2462.080000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2462.090000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2462.100000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2462.100000] [audio codec]:suspend start5000
- [ 2462.770000] [audio codec]:suspend end
- [ 2462.770000] pmu_suspend_chgcur = 1000000
- [ 2462.780000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.790000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:0:45
- [ 2462.790000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.800000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:0:45
- [ 2462.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.810000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:0:45
- [ 2462.820000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.820000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:0:45
- [ 2462.830000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.830000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:0:45
- [ 2462.840000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2462.840000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2462.850000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2462.860000] [sw-ohci1]: close clock
- [ 2462.860000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2462.870000] [sw-ehci1]: Set USB Power OFF
- [ 2462.870000] [sw-ehci1]: close clock
- [ 2462.880000] [sw_hcd0]: sw_hcd_suspend start
- [ 2462.880000] wrn: hcd is disable, need not enter to suspend
- [ 2462.890000] [sw_udc]: sw_udc_suspend start
- [ 2462.890000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2462.900000] [i2c2] suspend okay..
- [ 2462.910000] [i2c1] suspend okay..
- [ 2462.910000] [NAND] nand_suspend
- [ 2462.910000] [NAND] nand_suspend ok
- [ 2462.920000] [sw_dmac_suspend] enter
- [ 2462.920000] PM: suspend of devices complete after 841.064 msecs
- [ 2462.930000] [pm]prepare
- [ 2462.930000] PM: late suspend of devices complete after 2.112 msecs
- [ 2462.940000] [pm]prepare_late
- [ 2462.940000] [pm]enter state 3
- [ 2462.940000] [pm]platform wakeup, wakesource is:0x10
- [ 2462.950000] PM: early resume of devices complete after 1.341 msecs
- [ 2462.960000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2462.970000] [pm]platform wakeup finish
- [ 2462.970000] [sw_dmac_resume] enter
- [ 2462.970000] [NAND] nand_resume
- [ 2462.980000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:18:44
- [ 2462.980000] wakeup wake lock: alarm_rtc
- [ 2462.990000] [NAND] nand gpio_request
- [ 2462.990000] twi1, apb clock = 24000000
- [ 2462.990000] [i2c1] resume okay..
- [ 2463.000000] twi2, apb clock = 24000000
- [ 2463.000000] [i2c2] resume okay..
- [ 2463.010000] [sw_udc]: sw_udc_resume start
- [ 2463.010000] [sw_udc]: udc is disable, need not enter to resume
- [ 2463.020000] [sw_hcd0]: sw_hcd_resume start
- [ 2463.020000] wrn: hcd is disable, need not resume
- [ 2463.040000] wemac wemac.0: resetting device
- [ 2463.040000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2463.050000] [sw-ehci1]: open clock
- [ 2463.070000] [sw-ehci1]: Set USB Power ON
- [ 2463.070000] [sw-ehci1]: lost power, restarting
- [ 2463.080000] usb usb2: root hub lost power or was reset
- [ 2463.230000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2463.230000] [sw-ohci1]: open clock
- [ 2463.310000] usb usb3: root hub lost power or was reset
- [ 2463.550000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2463.550000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2463.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2463.560000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:18:44
- [ 2463.570000] val = 0x60,pre_rest_vol = 95,rest_vol = 96
- [ 2463.580000] battery vol change: 95->96
- [ 2463.580000] [AXP]=======================val = 0x0
- [ 2463.590000] pmu_resume_chgcur = 300000
- [ 2463.590000] [audio codec]:resume start
- [ 2463.590000] codec_resume_events,1271
- [ 2463.600000] [audio codec]:resume end
- [ 2463.600000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2463.610000] [mmc_pm]: No sdio card, please check your config !!
- [ 2463.610000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2463.620000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2463.720000] [CSI]csi_resume
- [ 2463.720000] PM: resume of devices complete after 746.995 msecs
- [ 2463.720000] [pm]aw_pm_end!
- [ 2463.730000] PM: Finishing wakeup.
- [ 2463.730000] Restarting tasks ... done.
- [ 2463.770000] suspend: exit suspend, ret = 0 (2012-04-25 05:19:28.290997989 UTC)
- [ 2464.260000] ====pa turn on===
- [ 2533.810000] battery vol change: 96->95
- [ 2583.980000] [pm]valid
- [ 2583.980000] PM: Syncing filesystems ... done.
- [ 2584.010000] PM: Preparing system for mem sleep
- [ 2584.020000] Freezing user space processes ... (elapsed 0.07 seconds) done.
- [ 2584.100000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2584.120000] PM: Entering mem sleep
- [ 2584.120000] [pm]3 state begin
- [ 2584.130000] [CSI]csi_suspend
- [ 2584.130000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2584.140000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2584.150000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2584.150000] [audio codec]:suspend start5000
- [ 2584.820000] [audio codec]:suspend end
- [ 2584.820000] pmu_suspend_chgcur = 1000000
- [ 2584.830000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2584.840000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:20:45
- [ 2584.840000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2584.850000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:20:45
- [ 2584.850000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2584.860000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:20:45
- [ 2584.860000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2584.870000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:20:46
- [ 2584.880000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2584.880000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:20:46
- [ 2584.890000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2584.890000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2584.900000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2584.910000] [sw-ohci1]: close clock
- [ 2584.910000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2584.920000] [sw-ehci1]: Set USB Power OFF
- [ 2584.920000] [sw-ehci1]: close clock
- [ 2584.930000] [sw_hcd0]: sw_hcd_suspend start
- [ 2584.930000] wrn: hcd is disable, need not enter to suspend
- [ 2584.940000] [sw_udc]: sw_udc_suspend start
- [ 2584.940000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2584.950000] [i2c2] suspend okay..
- [ 2584.960000] [i2c1] suspend okay..
- [ 2584.960000] [NAND] nand_suspend
- [ 2584.960000] [NAND] nand_suspend ok
- [ 2584.970000] [sw_dmac_suspend] enter
- [ 2584.970000] PM: suspend of devices complete after 841.388 msecs
- [ 2584.980000] [pm]prepare
- [ 2584.980000] PM: late suspend of devices complete after 2.100 msecs
- [ 2584.990000] [pm]prepare_late
- [ 2584.990000] [pm]enter state 3
- [ 2584.990000] [pm]platform wakeup, wakesource is:0x1
- [ 2585.000000] PM: early resume of devices complete after 1.340 msecs
- [ 2585.010000] [pm]platform wakeup finish
- [ 2585.020000] [sw_dmac_resume] enter
- [ 2585.020000] [NAND] nand_resume
- [ 2585.020000] [NAND] nand gpio_request
- [ 2585.030000] twi1, apb clock = 24000000
- [ 2585.030000] [i2c1] resume okay..
- [ 2585.030000] twi2, apb clock = 24000000
- [ 2585.040000] [i2c2] resume okay..
- [ 2585.040000] [sw_udc]: sw_udc_resume start
- [ 2585.050000] [sw_udc]: udc is disable, need not enter to resume
- [ 2585.050000] [sw_hcd0]: sw_hcd_resume start
- [ 2585.060000] wrn: hcd is disable, need not resume
- [ 2585.080000] wemac wemac.0: resetting device
- [ 2585.080000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2585.090000] [sw-ehci1]: open clock
- [ 2585.110000] [sw-ehci1]: Set USB Power ON
- [ 2585.110000] [sw-ehci1]: lost power, restarting
- [ 2585.120000] usb usb2: root hub lost power or was reset
- [ 2585.270000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2585.270000] [sw-ohci1]: open clock
- [ 2585.350000] usb usb3: root hub lost power or was reset
- [ 2585.590000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2585.590000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2585.600000] wakeup wake lock: event0-148
- [ 2585.600000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2585.610000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:21:6
- [ 2585.610000] [AXP]press short
- [ 2585.620000] [AXP]=======================val = 0x0
- [ 2585.620000] pmu_resume_chgcur = 300000
- [ 2585.630000] [audio codec]:resume start
- [ 2585.630000] codec_resume_events,1271
- [ 2585.640000] [audio codec]:resume end
- [ 2585.640000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2585.640000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2585.650000] [mmc_pm]: No sdio card, please check your config !!
- [ 2585.660000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2585.730000] [AXP]event = 0x20000
- [ 2585.770000] [CSI]csi_resume
- [ 2585.770000] PM: resume of devices complete after 751.293 msecs
- [ 2585.770000] [pm]aw_pm_end!
- [ 2585.780000] PM: Finishing wakeup.
- [ 2585.780000] Restarting tasks ...
- [ 2585.790000] request_suspend_state: wakeup (3->0) at 2585799171778 (2012-04-25 05:21:49.602536470 UTC)
- [ 2585.800000] done.
- [ 2585.850000] suspend: exit suspend, ret = 0 (2012-04-25 05:21:49.657467901 UTC)
- [ 2585.860000] =======goodix_ts_late_resume========
- [ 2585.950000] display late resume enter: backlight_late_resume
- [ 2586.310000] ====pa turn on===
- [ 2586.530000] display late resume done: backlight_late_resume
- [ 2586.530000] enter laterresume: sun4i_keyboard_resume.
- [ 2586.540000] [AXP]======late resume=======
- [ 2586.560000] mma7660 late resume
- [ 2756.480000] [AXP]press short
- [ 2756.600000] [AXP]event = 0x20000
- [ 2756.900000] [pm]valid
- [ 2756.900000] request_suspend_state: sleep (0->3) at 2756902425803 (2012-04-25 05:24:40.705790828 UTC)
- [ 2756.910000] mma7660 early suspend
- [ 2756.910000] [AXP]======early suspend=======
- [ 2756.920000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 2756.920000] display early suspend: backlight_early_suspend
- [ 2757.990000] =======goodix_ts_early_suspend========
- [ 2757.990000] Goodix-TS 2-005d: Send suspend cmd
- [ 2761.900000] [pm]valid
- [ 2761.900000] PM: Syncing filesystems ... done.
- [ 2761.900000] PM: Preparing system for mem sleep
- [ 2761.910000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2761.940000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2761.960000] PM: Entering mem sleep
- [ 2761.960000] [pm]3 state begin
- [ 2761.960000] [CSI]csi_suspend
- [ 2761.970000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2761.970000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2761.980000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2761.990000] [audio codec]:suspend start5000
- [ 2762.640000] [audio codec]:suspend end
- [ 2762.640000] pmu_suspend_chgcur = 1000000
- [ 2762.650000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.650000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:3
- [ 2762.660000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.660000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:3
- [ 2762.670000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.670000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:3
- [ 2762.680000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.680000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:3
- [ 2762.690000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.690000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:3
- [ 2762.700000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2762.710000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2762.710000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2762.720000] [sw-ohci1]: close clock
- [ 2762.720000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2762.720000] [sw-ehci1]: Set USB Power OFF
- [ 2762.730000] [sw-ehci1]: close clock
- [ 2762.730000] [sw_hcd0]: sw_hcd_suspend start
- [ 2762.740000] wrn: hcd is disable, need not enter to suspend
- [ 2762.740000] [sw_udc]: sw_udc_suspend start
- [ 2762.750000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2762.750000] [i2c2] suspend okay..
- [ 2762.760000] [i2c1] suspend okay..
- [ 2762.760000] [NAND] nand_suspend
- [ 2762.760000] [NAND] nand_suspend ok
- [ 2762.770000] [sw_dmac_suspend] enter
- [ 2762.770000] PM: suspend of devices complete after 805.726 msecs
- [ 2762.780000] [pm]prepare
- [ 2762.780000] PM: late suspend of devices complete after 0.257 msecs
- [ 2762.790000] [pm]prepare_late
- [ 2762.790000] [pm]enter state 3
- [ 2762.790000] [pm]platform wakeup, wakesource is:0x10
- [ 2762.790000] PM: early resume of devices complete after 0.154 msecs
- [ 2762.800000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2762.800000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:28
- [ 2762.810000] [pm]platform wakeup finish
- [ 2762.820000] [sw_dmac_resume] enter
- [ 2762.820000] [NAND] nand_resume
- [ 2762.820000] [NAND] nand gpio_request
- [ 2762.830000] wakeup wake lock: alarm_rtc
- [ 2762.830000] twi1, apb clock = 24000000
- [ 2762.830000] [i2c1] resume okay..
- [ 2762.840000] twi2, apb clock = 24000000
- [ 2762.840000] [i2c2] resume okay..
- [ 2762.840000] [sw_udc]: sw_udc_resume start
- [ 2762.850000] [sw_udc]: udc is disable, need not enter to resume
- [ 2762.850000] [sw_hcd0]: sw_hcd_resume start
- [ 2762.860000] wrn: hcd is disable, need not resume
- [ 2762.880000] wemac wemac.0: resetting device
- [ 2762.880000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2762.890000] [sw-ehci1]: open clock
- [ 2762.910000] [sw-ehci1]: Set USB Power ON
- [ 2762.910000] [sw-ehci1]: lost power, restarting
- [ 2762.920000] usb usb2: root hub lost power or was reset
- [ 2763.070000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2763.070000] [sw-ohci1]: open clock
- [ 2763.150000] usb usb3: root hub lost power or was reset
- [ 2763.390000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2763.390000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2763.400000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2763.400000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:28
- [ 2763.410000] [AXP]=======================val = 0x0
- [ 2763.420000] pmu_resume_chgcur = 300000
- [ 2763.420000] [audio codec]:resume start
- [ 2763.420000] codec_resume_events,1271
- [ 2763.430000] [audio codec]:resume end
- [ 2763.430000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2763.440000] [mmc_pm]: No sdio card, please check your config !!
- [ 2763.440000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2763.450000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2763.550000] [CSI]csi_resume
- [ 2763.550000] PM: resume of devices complete after 732.505 msecs
- [ 2763.550000] [pm]aw_pm_end!
- [ 2763.560000] PM: Finishing wakeup.
- [ 2763.560000] Restarting tasks ... done.
- [ 2763.590000] suspend: exit suspend, ret = 0 (2012-04-25 05:25:11.695875332 UTC)
- [ 2764.090000] ====pa turn on===
- [ 2768.610000] [pm]valid
- [ 2768.610000] PM: Syncing filesystems ... done.
- [ 2768.610000] PM: Preparing system for mem sleep
- [ 2768.620000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2768.650000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2768.670000] PM: Entering mem sleep
- [ 2768.670000] [pm]3 state begin
- [ 2768.670000] [CSI]csi_suspend
- [ 2768.680000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2768.680000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2768.690000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2768.700000] [audio codec]:suspend start5000
- [ 2769.350000] [audio codec]:suspend end
- [ 2769.350000] pmu_suspend_chgcur = 1000000
- [ 2769.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:34
- [ 2769.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.370000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:34
- [ 2769.380000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.380000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:34
- [ 2769.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.390000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:34
- [ 2769.400000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.410000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:24:34
- [ 2769.410000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2769.420000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2769.420000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2769.430000] [sw-ohci1]: close clock
- [ 2769.430000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2769.440000] [sw-ehci1]: Set USB Power OFF
- [ 2769.440000] [sw-ehci1]: close clock
- [ 2769.450000] [sw_hcd0]: sw_hcd_suspend start
- [ 2769.450000] wrn: hcd is disable, need not enter to suspend
- [ 2769.450000] [sw_udc]: sw_udc_suspend start
- [ 2769.460000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2769.470000] [i2c2] suspend okay..
- [ 2769.470000] [i2c1] suspend okay..
- [ 2769.470000] [NAND] nand_suspend
- [ 2769.480000] [NAND] nand_suspend ok
- [ 2769.480000] [sw_dmac_suspend] enter
- [ 2769.480000] PM: suspend of devices complete after 807.566 msecs
- [ 2769.490000] [pm]prepare
- [ 2769.490000] PM: late suspend of devices complete after 0.262 msecs
- [ 2769.500000] [pm]prepare_late
- [ 2769.500000] [pm]enter state 3
- [ 2769.500000] [pm]platform wakeup, wakesource is:0x10
- [ 2769.510000] PM: early resume of devices complete after 0.159 msecs
- [ 2769.510000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2769.520000] [pm]platform wakeup finish
- [ 2769.520000] [sw_dmac_resume] enter
- [ 2769.530000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:42
- [ 2769.530000] wakeup wake lock: alarm_rtc
- [ 2769.530000] [NAND] nand_resume
- [ 2769.540000] [NAND] nand gpio_request
- [ 2769.540000] twi1, apb clock = 24000000
- [ 2769.550000] [i2c1] resume okay..
- [ 2769.550000] twi2, apb clock = 24000000
- [ 2769.550000] [i2c2] resume okay..
- [ 2769.560000] [sw_udc]: sw_udc_resume start
- [ 2769.560000] [sw_udc]: udc is disable, need not enter to resume
- [ 2769.570000] [sw_hcd0]: sw_hcd_resume start
- [ 2769.570000] wrn: hcd is disable, need not resume
- [ 2769.590000] wemac wemac.0: resetting device
- [ 2769.590000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2769.600000] [sw-ehci1]: open clock
- [ 2769.620000] [sw-ehci1]: Set USB Power ON
- [ 2769.620000] [sw-ehci1]: lost power, restarting
- [ 2769.630000] usb usb2: root hub lost power or was reset
- [ 2769.780000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2769.780000] [sw-ohci1]: open clock
- [ 2769.860000] usb usb3: root hub lost power or was reset
- [ 2770.100000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2770.100000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2770.110000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2770.110000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:42
- [ 2770.120000] val = 0x5f,pre_rest_vol = 95,rest_vol = 95
- [ 2770.130000] [AXP]=======================val = 0x0
- [ 2770.130000] pmu_resume_chgcur = 300000
- [ 2770.140000] [audio codec]:resume start
- [ 2770.140000] codec_resume_events,1271
- [ 2770.140000] [audio codec]:resume end
- [ 2770.150000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2770.150000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2770.160000] [mmc_pm]: No sdio card, please check your config !!
- [ 2770.160000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2770.270000] [CSI]csi_resume
- [ 2770.270000] PM: resume of devices complete after 747.549 msecs
- [ 2770.270000] [pm]aw_pm_end!
- [ 2770.280000] PM: Finishing wakeup.
- [ 2770.280000] Restarting tasks ... done.
- [ 2770.340000] suspend: exit suspend, ret = 0 (2012-04-25 05:29:25.748667885 UTC)
- [ 2770.790000] ====pa turn on===
- [ 2775.340000] [pm]valid
- [ 2775.340000] PM: Syncing filesystems ... done.
- [ 2775.340000] PM: Preparing system for mem sleep
- [ 2775.350000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 2775.380000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2775.400000] PM: Entering mem sleep
- [ 2775.400000] [pm]3 state begin
- [ 2775.400000] [CSI]csi_suspend
- [ 2775.410000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2775.410000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2775.420000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2775.430000] [audio codec]:suspend start5000
- [ 2776.080000] [audio codec]:suspend end
- [ 2776.080000] pmu_suspend_chgcur = 1000000
- [ 2776.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.090000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:48
- [ 2776.100000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:48
- [ 2776.110000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.110000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:48
- [ 2776.120000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.120000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:48
- [ 2776.130000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.130000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:28:48
- [ 2776.140000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2776.150000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2776.150000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2776.160000] [sw-ohci1]: close clock
- [ 2776.160000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2776.170000] [sw-ehci1]: Set USB Power OFF
- [ 2776.170000] [sw-ehci1]: close clock
- [ 2776.170000] [sw_hcd0]: sw_hcd_suspend start
- [ 2776.180000] wrn: hcd is disable, need not enter to suspend
- [ 2776.180000] [sw_udc]: sw_udc_suspend start
- [ 2776.190000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2776.190000] [i2c2] suspend okay..
- [ 2776.200000] [i2c1] suspend okay..
- [ 2776.200000] [NAND] nand_suspend
- [ 2776.200000] [NAND] nand_suspend ok
- [ 2776.210000] [sw_dmac_suspend] enter
- [ 2776.210000] PM: suspend of devices complete after 806.377 msecs
- [ 2776.220000] [pm]prepare
- [ 2776.220000] PM: late suspend of devices complete after 0.255 msecs
- [ 2776.230000] [pm]prepare_late
- [ 2776.230000] [pm]enter state 3
- [ 2776.230000] [pm]platform wakeup, wakesource is:0x10
- [ 2776.230000] PM: early resume of devices complete after 0.153 msecs
- [ 2776.240000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.250000] [pm]platform wakeup finish
- [ 2776.250000] [sw_dmac_resume] enter
- [ 2776.250000] [NAND] nand_resume
- [ 2776.260000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:38:45
- [ 2776.260000] wakeup wake lock: alarm_rtc
- [ 2776.270000] [NAND] nand gpio_request
- [ 2776.270000] twi1, apb clock = 24000000
- [ 2776.270000] [i2c1] resume okay..
- [ 2776.280000] twi2, apb clock = 24000000
- [ 2776.280000] [i2c2] resume okay..
- [ 2776.280000] [sw_udc]: sw_udc_resume start
- [ 2776.290000] [sw_udc]: udc is disable, need not enter to resume
- [ 2776.290000] [sw_hcd0]: sw_hcd_resume start
- [ 2776.300000] wrn: hcd is disable, need not resume
- [ 2776.320000] wemac wemac.0: resetting device
- [ 2776.320000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2776.330000] [sw-ehci1]: open clock
- [ 2776.350000] [sw-ehci1]: Set USB Power ON
- [ 2776.350000] [sw-ehci1]: lost power, restarting
- [ 2776.360000] usb usb2: root hub lost power or was reset
- [ 2776.510000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2776.510000] [sw-ohci1]: open clock
- [ 2776.590000] usb usb3: root hub lost power or was reset
- [ 2776.830000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2776.830000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2776.840000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2776.840000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:38:45
- [ 2776.850000] val = 0x5f,pre_rest_vol = 95,rest_vol = 95
- [ 2776.860000] [AXP]=======================val = 0x0
- [ 2776.860000] pmu_resume_chgcur = 300000
- [ 2776.870000] [audio codec]:resume start
- [ 2776.870000] codec_resume_events,1271
- [ 2776.870000] [audio codec]:resume end
- [ 2776.880000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2776.880000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2776.890000] [mmc_pm]: No sdio card, please check your config !!
- [ 2776.890000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2777.000000] [CSI]csi_resume
- [ 2777.000000] PM: resume of devices complete after 748.687 msecs
- [ 2777.000000] [pm]aw_pm_end!
- [ 2777.010000] PM: Finishing wakeup.
- [ 2777.010000] Restarting tasks ... done.
- [ 2777.070000] suspend: exit suspend, ret = 0 (2012-04-25 05:39:28.781789864 UTC)
- [ 2777.520000] ====pa turn on===
- [ 2847.090000] battery vol change: 95->94
- [ 2897.260000] [pm]valid
- [ 2897.260000] PM: Syncing filesystems ... done.
- [ 2897.290000] PM: Preparing system for mem sleep
- [ 2897.300000] battery vol change: 94->93
- [ 2897.310000] Freezing user space processes ...
- [ 2897.360000] active wake lock power-supply
- [ 2897.360000]
- [ 2897.370000] Freezing of user space aborted
- [ 2897.370000]
- [ 2897.380000] Restarting tasks ... done.
- [ 2897.460000] suspend: exit suspend, ret = -16 (2012-04-25 05:41:29.179920777 UTC)
- [ 2897.490000] active wake lock unknown_wakeups, time left 500
- [ 2902.500000] [pm]valid
- [ 2902.500000] PM: Syncing filesystems ... done.
- [ 2902.510000] PM: Preparing system for mem sleep
- [ 2902.520000] Freezing user space processes ... (elapsed 0.06 seconds) done.
- [ 2902.590000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 2902.610000] PM: Entering mem sleep
- [ 2902.610000] [pm]3 state begin
- [ 2902.620000] [CSI]csi_suspend
- [ 2902.620000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 2902.630000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 2902.640000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 2902.640000] [audio codec]:suspend start5000
- [ 2903.310000] [audio codec]:suspend end
- [ 2903.310000] pmu_suspend_chgcur = 1000000
- [ 2903.320000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2903.330000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:40:52
- [ 2903.330000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2903.340000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:40:52
- [ 2903.340000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2903.350000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:40:52
- [ 2903.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2903.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:40:52
- [ 2903.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2903.370000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:40:52
- [ 2903.380000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2903.380000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2903.390000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 2903.400000] [sw-ohci1]: close clock
- [ 2903.400000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 2903.410000] [sw-ehci1]: Set USB Power OFF
- [ 2903.410000] [sw-ehci1]: close clock
- [ 2903.420000] [sw_hcd0]: sw_hcd_suspend start
- [ 2903.420000] wrn: hcd is disable, need not enter to suspend
- [ 2903.430000] [sw_udc]: sw_udc_suspend start
- [ 2903.430000] [sw_udc]: udc is disable, need not enter to suspend
- [ 2903.440000] [i2c2] suspend okay..
- [ 2903.450000] [i2c1] suspend okay..
- [ 2903.450000] [NAND] nand_suspend
- [ 2903.450000] [NAND] nand_suspend ok
- [ 2903.460000] [sw_dmac_suspend] enter
- [ 2903.460000] PM: suspend of devices complete after 840.985 msecs
- [ 2903.470000] [pm]prepare
- [ 2903.470000] PM: late suspend of devices complete after 2.115 msecs
- [ 2903.480000] [pm]prepare_late
- [ 2903.480000] [pm]enter state 3
- [ 2903.480000] [pm]platform wakeup, wakesource is:0x1
- [ 2903.490000] PM: early resume of devices complete after 1.339 msecs
- [ 2903.500000] [pm]platform wakeup finish
- [ 2903.510000] [sw_dmac_resume] enter
- [ 2903.510000] [NAND] nand_resume
- [ 2903.510000] [NAND] nand gpio_request
- [ 2903.520000] twi1, apb clock = 24000000
- [ 2903.520000] [i2c1] resume okay..
- [ 2903.520000] twi2, apb clock = 24000000
- [ 2903.530000] [i2c2] resume okay..
- [ 2903.530000] [sw_udc]: sw_udc_resume start
- [ 2903.540000] [sw_udc]: udc is disable, need not enter to resume
- [ 2903.540000] [sw_hcd0]: sw_hcd_resume start
- [ 2903.550000] wrn: hcd is disable, need not resume
- [ 2903.570000] wemac wemac.0: resetting device
- [ 2903.570000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 2903.580000] [sw-ehci1]: open clock
- [ 2903.600000] [sw-ehci1]: Set USB Power ON
- [ 2903.600000] [sw-ehci1]: lost power, restarting
- [ 2903.610000] usb usb2: root hub lost power or was reset
- [ 2903.760000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 2903.760000] [sw-ohci1]: open clock
- [ 2903.840000] usb usb3: root hub lost power or was reset
- [ 2904.080000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 2904.080000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 2904.090000] wakeup wake lock: event0-148
- [ 2904.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 2904.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:45:10
- [ 2904.100000] [AXP]press short
- [ 2904.110000] val = 0x5f,pre_rest_vol = 93,rest_vol = 93
- [ 2904.110000] [AXP]=======================val = 0x0
- [ 2904.120000] pmu_resume_chgcur = 300000
- [ 2904.120000] [audio codec]:resume start
- [ 2904.130000] codec_resume_events,1271
- [ 2904.130000] [audio codec]:resume end
- [ 2904.130000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 2904.140000] [mmc_pm]: No sdio card, please check your config !!
- [ 2904.150000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 2904.150000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 2904.220000] [AXP]event = 0x20000
- [ 2904.270000] [CSI]csi_resume
- [ 2904.270000] PM: resume of devices complete after 761.720 msecs
- [ 2904.270000] [pm]aw_pm_end!
- [ 2904.280000] PM: Finishing wakeup.
- [ 2904.280000] Restarting tasks ...
- [ 2904.300000] request_suspend_state: wakeup (3->0) at 2904300569964 (2012-04-25 05:45:53.296406753 UTC)
- [ 2904.330000] done.
- [ 2904.340000] suspend: exit suspend, ret = 0 (2012-04-25 05:45:53.336785944 UTC)
- [ 2904.340000] =======goodix_ts_late_resume========
- [ 2904.470000] display late resume enter: backlight_late_resume
- [ 2904.780000] ====pa turn on===
- [ 2905.050000] display late resume done: backlight_late_resume
- [ 2905.050000] enter laterresume: sun4i_keyboard_resume.
- [ 2905.060000] [AXP]======late resume=======
- [ 2905.070000] mma7660 late resume
- [ 3127.360000] [AXP]press short
- [ 3127.470000] [AXP]event = 0x20000
- [ 3127.770000] [pm]valid
- [ 3127.770000] request_suspend_state: sleep (0->3) at 3127772478834 (2012-04-25 05:49:36.768316039 UTC)
- [ 3127.780000] mma7660 early suspend
- [ 3127.780000] [AXP]======early suspend=======
- [ 3127.820000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 3127.880000] display early suspend: backlight_early_suspend
- [ 3128.900000] =======goodix_ts_early_suspend========
- [ 3128.900000] Goodix-TS 2-005d: Send suspend cmd
- [ 3132.770000] [pm]valid
- [ 3132.770000] PM: Syncing filesystems ... done.
- [ 3132.770000] PM: Preparing system for mem sleep
- [ 3132.780000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 3132.810000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 3132.830000] PM: Entering mem sleep
- [ 3132.830000] [pm]3 state begin
- [ 3132.830000] [CSI]csi_suspend
- [ 3132.840000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 3132.840000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 3132.850000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 3132.860000] [audio codec]:suspend start5000
- [ 3133.510000] [audio codec]:suspend end
- [ 3133.510000] pmu_suspend_chgcur = 1000000
- [ 3133.520000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.520000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:48:59
- [ 3133.530000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.530000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:48:59
- [ 3133.540000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.540000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:48:59
- [ 3133.550000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.550000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:48:59
- [ 3133.560000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.570000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:48:59
- [ 3133.570000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3133.580000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3133.580000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 3133.590000] [sw-ohci1]: close clock
- [ 3133.590000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 3133.600000] [sw-ehci1]: Set USB Power OFF
- [ 3133.600000] [sw-ehci1]: close clock
- [ 3133.600000] [sw_hcd0]: sw_hcd_suspend start
- [ 3133.610000] wrn: hcd is disable, need not enter to suspend
- [ 3133.610000] [sw_udc]: sw_udc_suspend start
- [ 3133.620000] [sw_udc]: udc is disable, need not enter to suspend
- [ 3133.630000] [i2c2] suspend okay..
- [ 3133.630000] [i2c1] suspend okay..
- [ 3133.630000] [NAND] nand_suspend
- [ 3133.640000] [NAND] nand_suspend ok
- [ 3133.640000] [sw_dmac_suspend] enter
- [ 3133.640000] PM: suspend of devices complete after 807.519 msecs
- [ 3133.650000] [pm]prepare
- [ 3133.650000] PM: late suspend of devices complete after 0.325 msecs
- [ 3133.660000] [pm]prepare_late
- [ 3133.660000] [pm]enter state 3
- [ 3133.660000] [pm]platform wakeup, wakesource is:0x10
- [ 3133.670000] PM: early resume of devices complete after 0.198 msecs
- [ 3133.670000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3133.680000] [pm]platform wakeup finish
- [ 3133.680000] [sw_dmac_resume] enter
- [ 3133.690000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:24
- [ 3133.690000] wakeup wake lock: alarm_rtc
- [ 3133.700000] [NAND] nand_resume
- [ 3133.700000] [NAND] nand gpio_request
- [ 3133.700000] twi1, apb clock = 24000000
- [ 3133.710000] [i2c1] resume okay..
- [ 3133.710000] twi2, apb clock = 24000000
- [ 3133.710000] [i2c2] resume okay..
- [ 3133.720000] [sw_udc]: sw_udc_resume start
- [ 3133.720000] [sw_udc]: udc is disable, need not enter to resume
- [ 3133.730000] [sw_hcd0]: sw_hcd_resume start
- [ 3133.730000] wrn: hcd is disable, need not resume
- [ 3133.750000] wemac wemac.0: resetting device
- [ 3133.750000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 3133.760000] [sw-ehci1]: open clock
- [ 3133.780000] [sw-ehci1]: Set USB Power ON
- [ 3133.780000] [sw-ehci1]: lost power, restarting
- [ 3133.790000] usb usb2: root hub lost power or was reset
- [ 3133.940000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 3133.940000] [sw-ohci1]: open clock
- [ 3134.020000] usb usb3: root hub lost power or was reset
- [ 3134.260000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3134.260000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3134.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3134.270000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:24
- [ 3134.280000] [AXP]=======================val = 0x0
- [ 3134.290000] pmu_resume_chgcur = 300000
- [ 3134.290000] [audio codec]:resume start
- [ 3134.290000] codec_resume_events,1271
- [ 3134.300000] [audio codec]:resume end
- [ 3134.300000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 3134.310000] [mmc_pm]: No sdio card, please check your config !!
- [ 3134.310000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 3134.320000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 3134.420000] [CSI]csi_resume
- [ 3134.420000] PM: resume of devices complete after 735.972 msecs
- [ 3134.420000] [pm]aw_pm_end!
- [ 3134.430000] PM: Finishing wakeup.
- [ 3134.430000] Restarting tasks ... done.
- [ 3134.470000] suspend: exit suspend, ret = 0 (2012-04-25 05:50:07.768903542 UTC)
- [ 3134.960000] ====pa turn on===
- [ 3139.480000] [pm]valid
- [ 3139.480000] PM: Syncing filesystems ... done.
- [ 3139.480000] PM: Preparing system for mem sleep
- [ 3139.490000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 3139.520000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 3139.540000] PM: Entering mem sleep
- [ 3139.540000] [pm]3 state begin
- [ 3139.540000] [CSI]csi_suspend
- [ 3139.550000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 3139.550000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 3139.560000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 3139.570000] [audio codec]:suspend start5000
- [ 3140.220000] [audio codec]:suspend end
- [ 3140.220000] pmu_suspend_chgcur = 1000000
- [ 3140.230000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.230000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:30
- [ 3140.240000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.240000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:30
- [ 3140.250000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.250000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:30
- [ 3140.260000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.270000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:30
- [ 3140.270000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.280000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:30
- [ 3140.280000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3140.290000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3140.290000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 3140.300000] [sw-ohci1]: close clock
- [ 3140.300000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 3140.310000] [sw-ehci1]: Set USB Power OFF
- [ 3140.310000] [sw-ehci1]: close clock
- [ 3140.320000] [sw_hcd0]: sw_hcd_suspend start
- [ 3140.320000] wrn: hcd is disable, need not enter to suspend
- [ 3140.320000] [sw_udc]: sw_udc_suspend start
- [ 3140.330000] [sw_udc]: udc is disable, need not enter to suspend
- [ 3140.340000] [i2c2] suspend okay..
- [ 3140.340000] [i2c1] suspend okay..
- [ 3140.340000] [NAND] nand_suspend
- [ 3140.350000] [NAND] nand_suspend ok
- [ 3140.350000] [sw_dmac_suspend] enter
- [ 3140.350000] PM: suspend of devices complete after 807.516 msecs
- [ 3140.360000] [pm]prepare
- [ 3140.360000] PM: late suspend of devices complete after 0.257 msecs
- [ 3140.370000] [pm]prepare_late
- [ 3140.370000] [pm]enter state 3
- [ 3140.370000] [pm]platform wakeup, wakesource is:0x1
- [ 3140.380000] PM: early resume of devices complete after 0.188 msecs
- [ 3140.380000] [pm]platform wakeup finish
- [ 3140.390000] [sw_dmac_resume] enter
- [ 3140.390000] [NAND] nand_resume
- [ 3140.390000] [NAND] nand gpio_request
- [ 3140.400000] twi1, apb clock = 24000000
- [ 3140.400000] [i2c1] resume okay..
- [ 3140.400000] twi2, apb clock = 24000000
- [ 3140.410000] [i2c2] resume okay..
- [ 3140.410000] [sw_udc]: sw_udc_resume start
- [ 3140.420000] [sw_udc]: udc is disable, need not enter to resume
- [ 3140.420000] [sw_hcd0]: sw_hcd_resume start
- [ 3140.430000] wrn: hcd is disable, need not resume
- [ 3140.450000] wemac wemac.0: resetting device
- [ 3140.450000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 3140.460000] [sw-ehci1]: open clock
- [ 3140.480000] [sw-ehci1]: Set USB Power ON
- [ 3140.480000] [sw-ehci1]: lost power, restarting
- [ 3140.490000] usb usb2: root hub lost power or was reset
- [ 3140.640000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 3140.640000] [sw-ohci1]: open clock
- [ 3140.720000] usb usb3: root hub lost power or was reset
- [ 3140.960000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3140.960000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3140.970000] wakeup wake lock: event0-148
- [ 3140.970000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3140.980000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:49:58
- [ 3140.980000] [AXP]press short
- [ 3140.990000] [AXP]=======================val = 0x0
- [ 3140.990000] pmu_resume_chgcur = 300000
- [ 3141.000000] [audio codec]:resume start
- [ 3141.000000] codec_resume_events,1271
- [ 3141.010000] [audio codec]:resume end
- [ 3141.010000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 3141.010000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 3141.020000] [mmc_pm]: No sdio card, please check your config !!
- [ 3141.030000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 3141.100000] [AXP]event = 0x20000
- [ 3141.140000] [CSI]csi_resume
- [ 3141.140000] PM: resume of devices complete after 752.577 msecs
- [ 3141.140000] [pm]aw_pm_end!
- [ 3141.150000] PM: Finishing wakeup.
- [ 3141.150000] Restarting tasks ...
- [ 3141.160000] request_suspend_state: wakeup (3->0) at 3141168398985 (2012-04-25 05:50:41.776643783 UTC)
- [ 3141.170000] done.
- [ 3141.220000] suspend: exit suspend, ret = 0 (2012-04-25 05:50:41.834308986 UTC)
- [ 3141.230000] =======goodix_ts_late_resume========
- [ 3141.320000] display late resume enter: backlight_late_resume
- [ 3141.680000] ====pa turn on===
- [ 3141.900000] display late resume done: backlight_late_resume
- [ 3141.900000] enter laterresume: sun4i_keyboard_resume.
- [ 3141.910000] [AXP]======late resume=======
- [ 3141.920000] mma7660 late resume
- [ 3142.060000] [AXP]press short
- [ 3142.170000] [AXP]event = 0x20000
- [ 3142.470000] [pm]valid
- [ 3142.470000] request_suspend_state: sleep (0->3) at 3142472459660 (2012-04-25 05:50:43.080704457 UTC)
- [ 3142.480000] mma7660 early suspend
- [ 3142.480000] [AXP]======early suspend=======
- [ 3142.490000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 3142.520000] display early suspend: backlight_early_suspend
- [ 3143.270000] [AXP]press short
- [ 3143.270000] request_suspend_state: wakeup (3->0) at 3143277088504 (2012-04-25 05:50:43.885333384 UTC)
- [ 3143.380000] [AXP]event = 0x20000
- [ 3143.560000] =======goodix_ts_early_suspend========
- [ 3143.560000] Goodix-TS 2-005d: Send suspend cmd
- [ 3143.570000] =======goodix_ts_late_resume========
- [ 3143.670000] display late resume enter: backlight_late_resume
- [ 3144.250000] display late resume done: backlight_late_resume
- [ 3144.250000] enter laterresume: sun4i_keyboard_resume.
- [ 3144.260000] [AXP]======late resume=======
- [ 3144.270000] mma7660 late resume
- [ 3199.190000] [AXP]press short
- [ 3199.300000] [AXP]event = 0x20000
- [ 3199.600000] [pm]valid
- [ 3199.600000] request_suspend_state: sleep (0->3) at 3199602457212 (2012-04-25 05:51:40.210702718 UTC)
- [ 3199.610000] mma7660 early suspend
- [ 3199.610000] [AXP]======early suspend=======
- [ 3199.630000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 3199.670000] display early suspend: backlight_early_suspend
- [ 3200.690000] =======goodix_ts_early_suspend========
- [ 3200.690000] Goodix-TS 2-005d: Send suspend cmd
- [ 3204.600000] [pm]valid
- [ 3204.600000] PM: Syncing filesystems ... done.
- [ 3204.600000] PM: Preparing system for mem sleep
- [ 3204.610000] Freezing user space processes ... (elapsed 0.02 seconds) done.
- [ 3204.640000] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
- [ 3204.660000] PM: Entering mem sleep
- [ 3204.660000] [pm]3 state begin
- [ 3204.660000] [CSI]csi_suspend
- [ 3204.670000] [HDMIAUDIO]Entered sun4i_hdmiaudio_suspend
- [ 3204.670000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x21, line= 506
- [ 3204.680000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x30000, line = 507
- [ 3204.690000] [audio codec]:suspend start5000
- [ 3205.340000] [audio codec]:suspend end
- [ 3205.340000] pmu_suspend_chgcur = 1000000
- [ 3205.350000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3205.350000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:3
- [ 3205.360000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3205.360000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:3
- [ 3205.370000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3205.370000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:3
- [ 3205.380000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3205.380000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:3
- [ 3205.390000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3205.390000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:3
- [ 3205.400000] WRN:L546(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3205.410000] WRN:L620(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3205.410000] [sw-ohci1]: sw_ohci_hcd_suspend
- [ 3205.420000] [sw-ohci1]: close clock
- [ 3205.420000] [sw-ehci1]: sw_ehci_hcd_suspend
- [ 3205.420000] [sw-ehci1]: Set USB Power OFF
- [ 3205.430000] [sw-ehci1]: close clock
- [ 3205.430000] [sw_hcd0]: sw_hcd_suspend start
- [ 3205.440000] wrn: hcd is disable, need not enter to suspend
- [ 3205.440000] [sw_udc]: sw_udc_suspend start
- [ 3205.450000] [sw_udc]: udc is disable, need not enter to suspend
- [ 3205.450000] [i2c2] suspend okay..
- [ 3205.460000] [i2c1] suspend okay..
- [ 3205.460000] [NAND] nand_suspend
- [ 3205.460000] [NAND] nand_suspend ok
- [ 3205.470000] [sw_dmac_suspend] enter
- [ 3205.470000] PM: suspend of devices complete after 805.848 msecs
- [ 3205.480000] [pm]prepare
- [ 3205.480000] PM: late suspend of devices complete after 0.256 msecs
- [ 3205.490000] [pm]prepare_late
- [ 3205.490000] [pm]enter state 3
- [ 3205.490000] [pm]platform wakeup, wakesource is:0x1
- [ 3205.490000] PM: early resume of devices complete after 0.155 msecs
- [ 3205.500000] [pm]platform wakeup finish
- [ 3205.510000] [sw_dmac_resume] enter
- [ 3205.510000] [NAND] nand_resume
- [ 3205.510000] [NAND] nand gpio_request
- [ 3205.520000] twi1, apb clock = 24000000
- [ 3205.520000] [i2c1] resume okay..
- [ 3205.520000] twi2, apb clock = 24000000
- [ 3205.530000] [i2c2] resume okay..
- [ 3205.530000] [sw_udc]: sw_udc_resume start
- [ 3205.530000] [sw_udc]: udc is disable, need not enter to resume
- [ 3205.540000] [sw_hcd0]: sw_hcd_resume start
- [ 3205.540000] wrn: hcd is disable, need not resume
- [ 3205.570000] wemac wemac.0: resetting device
- [ 3205.570000] [sw-ehci1]: sw_ehci_hcd_resume
- [ 3205.580000] [sw-ehci1]: open clock
- [ 3205.600000] [sw-ehci1]: Set USB Power ON
- [ 3205.600000] [sw-ehci1]: lost power, restarting
- [ 3205.610000] usb usb2: root hub lost power or was reset
- [ 3205.760000] [sw-ohci1]: sw_ohci_hcd_resume
- [ 3205.760000] [sw-ohci1]: open clock
- [ 3205.840000] usb usb3: root hub lost power or was reset
- [ 3206.080000] WRN:L688(drivers/usb/host/ehci_sun4i.c):ERR: hcd is null
- [ 3206.080000] WRN:L622(drivers/usb/host/ohci_sun4i.c):ERR: hcd is null
- [ 3206.090000] wakeup wake lock: event0-148
- [ 3206.090000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
- [ 3206.100000] sunxi-rtc sunxi-rtc: read time 2012-4-25 5:51:4
- [ 3206.100000] [AXP]battery state change
- [ 3206.110000] charger->usb_valid = 1
- [ 3206.110000] [AXP]event = 0x408
- [ 3206.120000] [AXP]=======================val = 0x0
- [ 3206.120000] pmu_resume_chgcur = 300000
- [ 3206.130000] [audio codec]:resume start
- [ 3206.130000] codec_resume_events,1271
- [ 3206.140000] [audio codec]:resume end
- [ 3206.140000] [HDMIAUDIO]Entered sun4i_hdmiaudio_resume
- [ 3206.140000] [HDMIAUDIO]SPECIAL CLK 0x01c20068 = 0x29, line= 531
- [ 3206.150000] [mmc_pm]: No sdio card, please check your config !!
- [ 3206.160000] [HDMIAUDIO]SPECIAL CLK 0x01c200B8 = 0x80030000, line = 532
- [ 3206.270000] [CSI]csi_resume
- [ 3206.270000] PM: resume of devices complete after 764.333 msecs
- [ 3206.270000] [pm]aw_pm_end!
- [ 3206.280000] PM: Finishing wakeup.
- [ 3206.280000] Restarting tasks ... done.
- [ 3206.310000] suspend: exit suspend, ret = 0 (2012-04-25 05:51:47.235051417 UTC)
- [ 3206.330000] request_suspend_state: wakeup (3->0) at 3206335383544 (2012-04-25 05:51:47.251268294 UTC)
- [ 3206.390000] active wake lock PowerManagerService
- [ 3206.390000] active wake lock main
- [ 3206.390000] active wake lock unknown_wakeups, time left 500
- [ 3206.400000] =======goodix_ts_late_resume========
- [ 3206.530000] display late resume enter: backlight_late_resume
- [ 3206.810000] ====pa turn on===
- [ 3207.110000] display late resume done: backlight_late_resume
- [ 3207.110000] enter laterresume: sun4i_keyboard_resume.
- [ 3207.120000] [AXP]======late resume=======
- [ 3207.130000] mma7660 late resume
- [ 3207.860000]
- [ 3207.860000]
- [ 3207.860000] insmod_device_driver
- [ 3207.860000]
- [ 3207.860000] [sw_udc]: sw_usb_device_enable start
- [ 3207.870000] [sw_udc]: usb_vbase = 0xf1c13000
- [ 3207.880000] [sw_udc]: sram_vbase = 0xf1c00000
- [ 3207.890000] [sw_udc]: open_usb_clock
- [ 3207.920000] [sw_udc]: usbd_stop_work
- [ 3207.920000] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
- [ 3207.930000] [sw_udc]: usbd_start_work
- [ 3207.940000] [sw_udc]: usbd_start_work
- [ 3207.940000] [sw_udc]: sw_usb_device_enable end
- [ 3207.990000] [sw_udc]: IRQ: suspend
- [ 3207.990000] [sw_udc]: ERR: usb speed is unkown
- [ 3208.090000] [sw_udc]: IRQ: reset
- [ 3208.090000] [sw_udc]: irq: reset happen, throw away all urb
- [ 3208.190000] [sw_udc]:
- [ 3208.190000] +++++++++++++++++++++++++++++++++++++
- [ 3208.190000] [sw_udc]: usb enter high speed.
- [ 3208.190000] [sw_udc]:
- [ 3208.190000] +++++++++++++++++++++++++++++++++++++
- [ 3208.210000] android_work: sent uevent USB_STATE=CONNECTED
- [ 3208.220000] [sw_udc]: IRQ: reset
- [ 3208.220000] [sw_udc]: irq: reset happen, throw away all urb
- [ 3208.310000] [sw_udc]: Set address 29
- [ 3208.330000] android_usb gadget: high speed config #1: android
- [ 3208.330000] [sw_udc]: ep enable: ep3(0xc0799be0, ep3-bulk, 128, 512)
- [ 3208.330000] [sw_udc]: ep enable: ep4(0xc0799c20, ep4-bulk, 0, 512)
- [ 3208.350000] [sw_udc]: ep enable: ep1(0xc0799b60, ep1-bulk, 128, 512)
- [ 3208.350000] [sw_udc]: ep enable: ep2(0xc0799ba0, ep2-bulk, 0, 512)
- [ 3208.360000] android_work: sent uevent USB_STATE=CONFIGURED
- [ 3208.400000] [sw_udc]: alloc request: ep(0xc0799b60, ep1-bulk, 512), req(0xe68d1e00)
- [ 3208.410000] [sw_udc]: alloc request: ep(0xc0799ba0, ep2-bulk, 512), req(0xe68d1b80)
- [ 3208.430000] [sw_udc]: alloc request: ep(0xc0799b60, ep1-bulk, 512), req(0xe68d1200)
- [ 3208.490000] [sw_udc]: alloc request: ep(0xc0799ba0, ep2-bulk, 512), req(0xe68d05c0)
- [ 3213.350000] WRN:L1364(drivers/usb/sun4i_usb/udc/sw_udc.c):handle_ep0: ep0 setup end
- [ 3218.310000] [AXP]press short
- [ 3218.420000] [AXP]event = 0x20000
- [ 3218.720000] [pm]valid
- [ 3218.720000] request_suspend_state: sleep (0->3) at 3218722545190 (2012-04-25 05:51:59.638430274 UTC)
- [ 3218.730000] mma7660 early suspend
- [ 3218.730000] [AXP]======early suspend=======
- [ 3218.750000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 3218.790000] display early suspend: backlight_early_suspend
- [ 3219.830000] =======goodix_ts_early_suspend========
- [ 3219.830000] Goodix-TS 2-005d: Send suspend cmd
- [ 3256.240000] battery vol change: 93->94
- [ 3296.320000] battery vol change: 94->93
- [ 3336.400000] battery vol change: 93->92
- [ 3376.480000] battery vol change: 92->91
- [ 3416.560000] battery vol change: 91->90
- [ 3456.640000] battery vol change: 90->89
- [ 3639.140000] EXT4-fs (nandd): re-mounted. Opts: (null)
- [ 4353.040000] [AXP]press short
- [ 4353.040000] request_suspend_state: wakeup (3->0) at 4353047730445 (2012-04-25 06:10:53.963615862 UTC)
- [ 4353.050000] =======goodix_ts_late_resume========
- [ 4353.150000] [AXP]event = 0x20000
- [ 4353.180000] display late resume enter: backlight_late_resume
- [ 4353.760000] display late resume done: backlight_late_resume
- [ 4353.760000] enter laterresume: sun4i_keyboard_resume.
- [ 4353.770000] [AXP]======late resume=======
- [ 4353.780000] mma7660 late resume
- [ 4369.330000] init: starting 'dhcpcd_eth0'
- [ 4369.360000] wemac wemac.0: enabling eth0
- [ 4369.410000] wemac wemac.0: WARNING: no IRQ resource flags set.
- [ 4369.440000] wemac wemac.0: resetting device
- [ 4369.440000] wemac wemac.0: eth0: link down
- [ 4369.470000] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 4385.510000] [AXP]press short
- [ 4385.630000] [AXP]event = 0x20000
- [ 4385.930000] [pm]valid
- [ 4385.930000] request_suspend_state: sleep (0->3) at 4385932393590 (2012-04-25 06:11:26.848279090 UTC)
- [ 4385.940000] mma7660 early suspend
- [ 4385.940000] [AXP]======early suspend=======
- [ 4385.960000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 4385.980000] display early suspend: backlight_early_suspend
- [ 4387.000000] =======goodix_ts_early_suspend========
- [ 4387.000000] Goodix-TS 2-005d: Send suspend cmd
- [ 4388.500000] battery vol change: 89->90
- [ 4399.540000] init: waitpid returned pid 2492, status = 00000100
- [ 4399.550000] init: process 'dhcpcd_eth0', pid 2492 exited
- [ 4428.580000] battery vol change: 90->91
- [ 4498.720000] battery vol change: 91->90
- [ 4538.800000] battery vol change: 90->89
- [ 5086.830000] [AXP]press short
- [ 5086.830000] request_suspend_state: wakeup (3->0) at 5086834300166 (2012-04-25 06:23:07.750182624 UTC)
- [ 5086.840000] =======goodix_ts_late_resume========
- [ 5086.930000] display late resume enter: backlight_late_resume
- [ 5086.940000] [AXP]event = 0x20000
- [ 5087.510000] display late resume done: backlight_late_resume
- [ 5087.510000] enter laterresume: sun4i_keyboard_resume.
- [ 5087.520000] [AXP]======late resume=======
- [ 5087.530000] mma7660 late resume
- [ 5106.690000] [AXP]press short
- [ 5106.800000] [AXP]event = 0x20000
- [ 5107.100000] [pm]valid
- [ 5107.100000] request_suspend_state: sleep (0->3) at 5107102410417 (2012-04-25 06:23:28.018295667 UTC)
- [ 5107.110000] mma7660 early suspend
- [ 5107.110000] [AXP]======early suspend=======
- [ 5107.120000] enter earlysuspend: sun4i_keyboard_suspend.
- [ 5107.120000] display early suspend: backlight_early_suspend
- [ 5108.170000] =======goodix_ts_early_suspend========
- [ 5108.170000] Goodix-TS 2-005d: Send suspend cmd
- [ 5119.980000] battery vol change: 89->90
- [ 5160.060000] battery vol change: 90->91
- [ 5230.200000] battery vol change: 91->90
- [ 5270.280000] battery vol change: 90->89
- [ 5290.170000] init: waitpid returned pid 83, status = 00000009
- [ 5290.170000] init: process 'debuggerd', pid 83 exited
- [ 5290.180000] init: process 'debuggerd' killing any children in process group
- [ 5290.190000] init: starting 'debuggerd'
- [ 5423.920000] init: waitpid returned pid 2582, status = 00000009
- [ 5423.930000] init: process 'debuggerd', pid 2582 exited
- [ 5423.930000] init: process 'debuggerd' killing any children in process group
- [ 5423.940000] init: starting 'debuggerd'
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement