bananapi-m2-next-5.10.0-rc4-next-20201118

U-Boot SPL 2020.10 (Nov 18 2020 - 13:55:49 +0300)
DRAM: 1024 MiB
Trying to boot from MMC1


U-Boot 2020.10 (Nov 18 2020 - 13:55:49 +0300) Allwinner Technology

CPU:   Allwinner A31s (SUN6I)
Model: Sinovoip BPI-M2
DRAM:  1 GiB
MMC:   mmc@1c0f000: 0, mmc@1c11000: 1
Loading Environment from FAT... Unable to use mmc 0:1... EDID block 0: checksum error, retrying
EDID block 0: checksum error, retrying
EDID block 0: checksum error
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet@1c30000
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 2 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2104 bytes read in 3 ms (684.6 KiB/s)
## Executing script at 43100000
Boot script loaded from mmc
165 bytes read in 2 ms (80.1 KiB/s)
4920712 bytes read in 220 ms (21.3 MiB/s)
39476 bytes read in 4 ms (9.4 MiB/s)
3450 bytes read in 3 ms (1.1 MiB/s)
Applying kernel provided DT fixup script (sun6i-a31s-fixup.scr)
## Executing script at 43000000
## Flattened Device Tree blob at 46000000
   Booting using the fdt blob at 0x46000000
   Loading Device Tree to 49f8e000, end 49ffffff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.10.0-rc4-next-20201118-sunxi (sergey@hanni-desktop-ubuntu) (arm-linux-gnueabihf-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-20
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Sinovoip BPI-M2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 16 MiB at 0x7f000000
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x000000007fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 15 pages/cpu s31436 r8192 d21812 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 260608
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty1 net.ifnames=0 ipv6.disable=1  consoleblank=0 loglevel=7 earlyprintk rootfstype=ext4 rootwait panic=10 init=/
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1011392K/1048576K available (7168K kernel code, 900K rwdata, 1836K rodata, 1024K init, 277K bss, 20800K reserved, 16384K cma-reserved, 245760K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x364/0x4f8 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000019] Switching to timer-based delay loop, resolution 41ns
[    0.000303] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000494] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000878] Console: colour dummy device 80x30
[    0.001373] printk: console [tty1] enabled
[    0.001425] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001459] pid_max: default: 32768 minimum: 301
[    0.001605] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001639] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002309] CPU: Testing write buffer coherency: ok
[    0.002619] /cpus/cpu@0 missing clock-frequency property
[    0.002654] /cpus/cpu@1 missing clock-frequency property
[    0.002684] /cpus/cpu@2 missing clock-frequency property
[    0.002715] /cpus/cpu@3 missing clock-frequency property
[    0.002735] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003230] Setting up static identity map for 0x40100000 - 0x40100060
[    0.003358] rcu: Hierarchical SRCU implementation.
[    0.003810] smp: Bringing up secondary CPUs ...
[    0.014420] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.025100] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035727] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035814] smp: Brought up 1 node, 4 CPUs
[    0.035872] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035889] CPU: All CPU(s) started in HYP mode.
[    0.035903] CPU: Virtualization extensions available.
[    0.036436] devtmpfs: initialized
[    0.043419] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[    0.043666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.043704] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.044400] pinctrl core: initialized pinctrl subsystem
[    0.045356] NET: Registered protocol family 16
[    0.046657] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.047620] thermal_sys: Registered thermal governor 'step_wise'
[    0.048110] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.048152] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.068119] SCSI subsystem initialized
[    0.068488] usbcore: registered new interface driver usbfs
[    0.068546] usbcore: registered new interface driver hub
[    0.068605] usbcore: registered new device driver usb
[    0.068762] mc: Linux media interface: v0.10
[    0.068813] videodev: Linux video capture interface: v2.00
[    0.068870] pps_core: LinuxPPS API ver. 1 registered
[    0.068888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.068923] PTP clock support registered
[    0.069282] Advanced Linux Sound Architecture Driver Initialized.
[    0.070136] clocksource: Switched to clocksource arch_sys_counter
[    0.077064] NET: Registered protocol family 2
[    0.077545] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.077592] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.077695] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.077821] TCP: Hash tables configured (established 8192 bind 8192)
[    0.077939] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.078003] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.078185] NET: Registered protocol family 1
[    0.078701] RPC: Registered named UNIX socket transport module.
[    0.078727] RPC: Registered udp transport module.
[    0.078742] RPC: Registered tcp transport module.
[    0.078756] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.080071] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[    0.080427] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.081430] Initialise system trusted keyrings
[    0.081611] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    0.087262] NFS: Registering the id_resolver key type
[    0.087312] Key type id_resolver registered
[    0.087329] Key type id_legacy registered
[    0.087381] Key type asymmetric registered
[    0.087398] Asymmetric key parser 'x509' registered
[    0.087458] bounce: pool size: 64 pages
[    0.087507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.087532] io scheduler mq-deadline registered
[    0.087547] io scheduler kyber registered
[    0.093682] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.094018] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing
[    0.139831] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.141569] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
[    0.142342] printk: console [ttyS0] disabled
[    0.162543] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 55, base_baud = 1500000) is a U6_16550A
[    0.872221] printk: console [ttyS0] enabled
[    0.886829] libphy: Fixed MDIO Bus: probed
[    0.891426] CAN device driver interface
[    0.895686] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    0.904376] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
[    0.910755] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
[    0.916754] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
[    0.923112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.929636] ehci-platform: EHCI generic platform driver
[    0.935100] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.940725] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.948769] ehci-platform 1c1a000.usb: irq 42, io mem 0x01c1a000
[    0.980144] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    0.986925] hub 1-0:1.0: USB hub found
[    0.990733] hub 1-0:1.0: 1 port detected
[    0.995141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.001353] ohci-platform: OHCI generic platform driver
[    1.006792] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.013448] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    1.021399] ohci-platform 1c1a400.usb: irq 43, io mem 0x01c1a400
[    1.094736] hub 2-0:1.0: USB hub found
[    1.098527] hub 2-0:1.0: 1 port detected
[    1.104587] sun6i-rtc 1f00000.rtc: registered as rtc0
[    1.109685] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:13 UTC (13)
[    1.117717] sun6i-rtc 1f00000.rtc: RTC enabled
[    1.122388] i2c /dev entries driver
[    1.127131] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.135857] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.135877] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.135907] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
[    1.136522] sun4i-ss 1c15000.crypto-engine: Die ID 5
[    1.146252] usbcore: registered new interface driver usbhid
[    1.172070] usbhid: USB HID core driver
[    1.177277] NET: Registered protocol family 17
[    1.181777] can: controller area network core
[    1.186201] NET: Registered protocol family 29
[    1.190673] can: raw protocol
[    1.193646] can: broadcast manager protocol
[    1.197837] can: netlink gateway - max_hops=1
[    1.202409] Key type dns_resolver registered
[    1.206900] Registering SWP/SWPB emulation handler
[    1.211774] Loading compiled-in X.509 certificates
[    1.230601] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    1.238375] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    1.247151] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
[    1.253532] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
[    1.259541] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
[    1.265818] sun6i-a31-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
[    1.275907] axp20x-i2c 0-0068: AXP20x variant AXP221 found
[    1.291478] input: axp20x-pek as /devices/platform/soc/1f03400.i2c/i2c-0/0-0068/axp221-pek/input/input0
[    1.315504] vdd-3v0: supplied by regulator-dummy
[    1.320924] vdd-gpu: supplied by regulator-dummy
[    1.326319] vdd-cpu: supplied by regulator-dummy
[    1.331711] vdd-sys-dll: supplied by regulator-dummy
[    1.337463] vcc-dram: supplied by regulator-dummy
[    1.342391] dc1sw: supplied by vdd-3v0
[    1.346925] vdd-cpus: supplied by vcc-dram
[    1.351822] vcc-wifi: supplied by regulator-dummy
[    1.357152] vcc-gmac: Bringing 1800000uV into 2500000-2500000uV
[    1.360152] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.370224] vcc-gmac: supplied by regulator-dummy
[    1.376258] avcc: supplied by regulator-dummy
[    1.381266] vdd-csi: Bringing 700000uV into 1800000-1800000uV
[    1.388265] vdd-csi: supplied by vdd-3v0
[    1.392963] eldo2: supplied by vdd-3v0
[    1.397462] eldo3: supplied by vdd-3v0
[    1.402011] vcc-mac: supplied by regulator-dummy
[    1.407255] avdd-csi: Bringing 700000uV into 2800000-2800000uV
[    1.413850] avdd-csi: supplied by regulator-dummy
[    1.419185] vcc-pb: Bringing 700000uV into 3300000-3300000uV
[    1.426180] vcc-pb: supplied by regulator-dummy
[    1.431530] dldo4: supplied by regulator-dummy
[    1.436198] rtc_ldo: supplied by regulator-dummy
[    1.441605] ldo_io0: supplied by regulator-dummy
[    1.446855] vcc-pm-cpus: Bringing 3800000uV into 1800000-1800000uV
[    1.454907] vcc-pm-cpus: supplied by regulator-dummy
[    1.460642] axp20x-i2c 0-0068: Supply for drivevbus (drivevbus) resolved to itself
[    1.468217] drivevbus: supplied by regulator-dummy
[    1.473418] axp20x-adc axp22x-adc: DMA mask not set
[    1.479755] axp20x-i2c 0-0068: AXP20X driver loaded
[    1.486918] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
[    1.486998] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    1.487043] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
[    1.487853] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
[    1.496092] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
[    1.504143] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
[    1.512566] debugfs: Directory '1c20800.pinctrl-vcc-pa' with parent 'reg-dummy-regulator-dummy' already present!
[    1.513092] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
[    1.517787] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
[    1.526340] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.529277] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.530788] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.532290] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.532754] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
[    1.534990] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.549380] random: fast init done
[    1.591401] sun7i-dwmac 1c30000.ethernet: Version ID not available
[    1.591491] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.592052] mmc0: new high speed SDIO card at address 0001
[    1.597596] sun7i-dwmac 1c30000.ethernet:    DWMAC1000
[    1.615029] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported
[    1.621327] hub 1-1:1.0: USB hub found
[    1.622266] sun7i-dwmac 1c30000.ethernet: Normal descriptors
[    1.626204] hub 1-1:1.0: 4 ports detected
[    1.631675] sun7i-dwmac 1c30000.ethernet: Ring mode enabled
[    1.632179] libphy: stmmac: probed
[    1.641838] mmc1: host does not support reading read-only switch, assuming write-enable
[    1.654566] mmc1: new high speed SDHC card at address 0001
[    1.660719] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
[    1.667224]  mmcblk1: p1
[    1.738973] ALSA device list:
[    1.741979]   No soundcards found.
[    1.745557] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.750270] Waiting for root device PARTUUID=a09ef512-7f29-47b8-8e9a-db5d1d58d8be...
[   31.840160] vdd-gpu: disabling
[   31.843826] dc1sw: disabling