BMW E46- VIN 858


2017-06-16 17:41:22  ★ Richard Hawkins would walk to the lift controls as he then places his right hand on the controlpad and
2017-06-16 17:41:42  ★ pushes his finger down on a small black button, making the center of the lift to raise,      ((Richard Hawkins))
2017-06-16 17:41:55  ★ racing the car up from the rocker panels.      ((Richard Hawkins))
2017-06-16 17:42:21  ★ Richard Hawkins would keep ahold of the button until all four wheels are off the ground.
2017-06-16 17:42:55  ★ Richard Hawkins would then release the button, walking to the air compressor, turning it on as he'd then
2017-06-16 17:43:45  ★ pull the pressure hose behind him as he walks to the drawers, reaching for the      ((Richard Hawkins))
2017-06-16 17:44:16  ★ air impact wrench and connects it to the hose as he then grabs onto the 19mm socket and      ((Richard Hawkins))
2017-06-16 17:44:47  ★ connects it to the impact wrench, as he'd then walk over to the blue BMW and kneels down to      ((Richard Hawkins))
2017-06-16 17:45:26  ★ the rear right wheel, using the impact wrench on the all 5 lugnuts to loosen them and      ((Richard Hawkins))
2017-06-16 17:45:41  ★ pockets the lugnuts, leaving the rim sit on the wheelhub.      ((Richard Hawkins))
2017-06-16 17:46:14  ★ Richard Hawkins would then walk to the front right of the car, kneeling down and uses the impact gun  to
2017-06-16 17:46:34  ★ loosen up and remove the lugnuts, pocketing them and walks around to the left rear of the      ((Richard Hawkins))
2017-06-16 17:46:55  ★ car, kneeling down and uses the impact gun to loosen up and remove the lugnuts, pocketing      ((Richard Hawkins))
2017-06-16 17:47:25  ★ them once again, leaving the wheel hanging on the wheelhub as he then walks to the front      ((Richard Hawkins))
2017-06-16 17:47:56  ★ left of the car, kneeling down and loosening the last five lugnuts and pockets them as      ((Richard Hawkins))
2017-06-16 17:48:27  ★ he places the impact gun on the floor and moves his hands to the rim and pulls on the rim,      ((Richard Hawkins))
2017-06-16 17:48:58  ★ pulling the wheel off of the wheelhub and sets it on its side under the table behind him.      ((Richard Hawkins))
2017-06-16 17:49:35  ★ Richard Hawkins would then walk to the rear left of the car, bending over and moves his hands to the
2017-06-16 17:49:51  ★ wheel, pulling it off the wheelhub and sets it on its side behind him.      ((Richard Hawkins))
2017-06-16 17:50:15  ★ Richard Hawkins would then walk to the rear right  of the car, bending over.
2017-06-16 18:36:48  ★ as he'd then grab ahold of the wheels with his hands and pulls the wheel off of the wheelhub      ((Richard Hawkins))
2017-06-16 18:37:31  ★ setting the wheel down on its side behind him as he 'd then stand up straight again and      ((Richard Hawkins))
2017-06-16 18:37:53  ★ walks to the front right of the car, bending down and moves his right hand to the wheel,      ((Richard Hawkins))
2017-06-16 18:38:11  ★ pulling the wheel off of the wheelhub as he then sets it down on its side behind him.      ((Richard Hawkins))
2017-06-16 18:38:30  ★ Richard Hawkins would then straighten his back and walks around the car to the driverside door, reaching
2017-06-16 18:38:52  ★ for the handle and pulls from it as he then reaches into the car, pulling on a lever as the      ((Richard Hawkins))
2017-06-16 18:38:57  ★ hood would then pop open.      ((Richard Hawkins))
2017-06-16 18:41:28  ★ Richard Hawkins would then stand back up straight, shutting the door and walking to the front of the car,
2017-06-16 18:41:44  ★ moving his hands under the hood, flicking a lever as he'd then lift the hood up.      ((Richard Hawkins))
2017-06-16 18:44:13  ★ Richard Hawkins would then walk to the rear of the car and reaches for the trunk , pulling on a handle as
2017-06-16 18:44:26  ★ he'd then lift the trunk open, smiling to himself.      ((Richard Hawkins))
2017-06-16 18:46:33  ★ Richard Hawkins would then walk to the toolbox, opening it and reaches for the socket wrench and a 17 mm
2017-06-16 18:47:05  ★ socket as he'd then connect the two and walks to the rear right of the BMW and kneels down      ((Richard Hawkins))
2017-06-16 18:47:31  ★ on the floor as he then starts to undo the lower shock absorber nut, spinning the      ((Richard Hawkins))
2017-06-16 18:48:04  ★ socetwrench counter clockwise and keeps on going until the nut comes off the bolt, as      ((Richard Hawkins))
2017-06-16 18:48:26  ★ he'd then place the nut on the lift and moves his right hand to the shock absorber, pushing      ((Richard Hawkins))
2017-06-16 18:49:10  ★ on it as it'd then slide off of the bolt, letting the rear axle drop a little as he'd then      ((Richard Hawkins))
2017-06-16 18:49:33  ★ grab the socket wrench again and walks to the left rear of the car and kneels down as      ((Richard Hawkins))
2017-06-16 18:50:01  ★ he'd then start to undo the same nut on the other side of the car and pushes the shock      ((Richard Hawkins))
2017-06-16 18:50:22  ★ absorber off the bolt, letting the rear axle drop a little more.      ((Richard Hawkins))
2017-06-16 18:50:51  ★ Richard Hawkins would then reach for the spring of the car, pulling it off of the car and throws it onto
2017-06-16 18:51:16  ★ the wheel behind him as he'd then walk to the right side of the car and reaches for that      ((Richard Hawkins))
2017-06-16 18:51:35  ★ sides spring, pulling it off of the car and putting it on the old rim.      ((Richard Hawkins))
2017-06-16 18:52:56  ★ Richard Hawkins would then walk to the impact gun and disconnects the 17mm socket from the socket wrench,
2017-06-16 18:53:38  ★ pocketing the socket wrench and crouches down to then take off the 19mm socket from the      ((Richard Hawkins))
2017-06-16 18:54:04  ★ impact gun, pocketing it and connects the 17mm soocket to it as he then moves to the      ((Richard Hawkins))
2017-06-16 18:54:31  ★ front right wheel well and uses the impact gun to loosen up the nut on the sway bar      ((Richard Hawkins))
2017-06-16 18:55:16  ★ end links as he'd then drop the nuts down on the floor and places the impact gun down on the      ((Richard Hawkins))
2017-06-16 18:55:49  ★ ground as he then pushes on the sway bar end link, disconnecting it from the sway bac from      ((Richard Hawkins))
2017-06-16 18:55:54  ★ the shock absorber.      ((Richard Hawkins))
2017-06-16 18:56:23  ★ Richard Hawkins would then reach for the impact gun and starts to loosen up the twoo nuts holding the shock
2017-06-16 18:56:28  ★ to the wheelhub.      ((Richard Hawkins))
2017-06-16 18:57:10  ★ Richard Hawkins would then pull on the bolts, pulling them off and pocketing them, releasing the shock from
2017-06-16 18:57:38  ★ the wheelhub as he then raises up to his feet with the impact gun and moves it to      ((Richard Hawkins))
2017-06-16 18:58:14  ★ the engine bay , using the impact gun to loosen up and remove the top two nuts holding the      ((Richard Hawkins))
2017-06-16 18:58:42  ★ shock to the chassis as a clunk could then be heard due to the shock absorber      ((Richard Hawkins))
2017-06-16 18:58:53  ★ dropping down onto the wheelhub as it's fully released.      ((Richard Hawkins))
2017-06-16 19:00:46  ★ Richard Hawkins would then rest the impact gun on the enginebay as he kneels down and reaches for
2017-06-16 19:01:09  ★ the shock absorber, pulling it away from the wheelhub and drops it on the floor as he then      ((Richard Hawkins))
2017-06-16 19:01:33  ★ walks to the left side of the car, reaching for the impact gun, pulling the hose over the      ((Richard Hawkins))
2017-06-16 19:02:01  ★ engine bay and kneels down as he'd then use the impact gun to undo the nuts from the      ((Richard Hawkins))
2017-06-16 19:02:29  ★ sway bar end links and from the wheelhub, placing the impact gun onto the engine bay and      ((Richard Hawkins))
2017-06-16 19:03:55  ★ kneels back down as he then uses his hands to disconnect the sway bar end link from the sway      ((Richard Hawkins))
2017-06-16 19:04:57  ★ bar and reaches for the bolts, pulling them off and pckets them as the shock would      ((Richard Hawkins))
2017-06-16 19:05:19  ★ be then disconnected from the wheelhub, as he'd then stand back up and reaches for the      ((Richard Hawkins))
2017-06-16 19:06:14  ★ impact gun and uses it to the loosen up and remove the two nuts of the top mount of the shoc      ((Richard Hawkins))
2017-06-16 19:07:32  ★ releasing it from the chassis, letting it drop down onto the wheelhub, as he'd then carry i      ((Richard Hawkins))
2017-06-16 19:08:00  ★ it over to the rear of the car, placing the impact gun into the trunk of the car and walks      ((Richard Hawkins))
2017-06-16 19:08:55  ★ back to the left of the car as he then kneels down and pulls the shock out of the wheel well      ((Richard Hawkins))
2017-06-16 19:09:14  ★ , placing it down on the ground as he then walks to the rear of the car, picking up the      ((Richard Hawkins))
2017-06-16 19:09:46  ★ impact gun and uses it to release the four nuts that hold both of the rear shocks in place.      ((Richard Hawkins))
2017-06-16 19:10:10  ★ clunks could be heard one after another as the shock absorbers drop down onto the floor.      ((Richard Hawkins))
2017-06-16 19:17:46  ★ Richard Hawkins then carry the impact gun to the left  front of the car and lowers it down on the  floor as
2017-06-16 19:18:06  ★ he'd then walk to the rear of the car, reaching under the car, pulling out the shock abosrbe      ((Richard Hawkins))
2017-06-16 19:18:12  ★ rs from under the car.      ((Richard Hawkins))
2017-06-16 19:21:56  ★ Richard Hawkins would then stand up and walks to the toolbox, carrying it to the front left of the car,
2017-06-16 19:24:40  ★ lowering it down to the ground as he kneels down and insects the brake system in front.      ((Richard Hawkins))
2017-06-16 19:25:19  ★ Richard Hawkins would then reach for the socket wrench and connects a 13mm socket to it as he'd then use it
2017-06-16 19:25:51  ★ to loosen up and remove the slider bolts from the brake calipers as he'd then use his hands      ((Richard Hawkins))
2017-06-16 19:26:24  ★ to pull on the brake caliper, forcing all the brakefluid back to its reservoir.      ((Richard Hawkins))
2017-06-16 19:28:07  ★ Richard Hawkins would then lift the leave the loose caliper to its place and places the socket wrench
2017-06-16 19:28:30  ★ down as he then reaches for the 8mm wrench and uses it to disconnect the brake line from the      ((Richard Hawkins))
2017-06-16 19:28:35  ★ caliper.      ((Richard Hawkins))
2017-06-16 19:29:00  ★ Richard Hawkins would then lift the old caliper off of its place, placing it down on the ground.
2017-06-16 19:30:34  ★ Richard Hawkins would then reach for the brake pads , pulling them off of their slots and drops them on the
2017-06-16 19:31:00  ★ floor as he then reaches for the socket wrench, using it to loosen up and remove the bolts      ((Richard Hawkins))
2017-06-16 19:31:13  ★ from the bracket that holds the calipers in place.      ((Richard Hawkins))
2017-06-16 19:34:03  ★ Richard Hawkins would then pocket the screws and places the bracket down on the floor and reaches for the
2017-06-16 19:34:30  ★ brake disc, pulling it off of the car as he then lowers it down on the ground and stands up      ((Richard Hawkins))
2017-06-16 19:35:13  ★ straight as he then walks to the shelf in the garage reaching for the cardboard box, opening      ((Richard Hawkins))
2017-06-16 19:35:36  ★ it and reaches into it to crab ahold of a caliper, disc and brakepads and walks back to the      ((Richard Hawkins))
2017-06-16 19:35:40  ★ left of the car.      ((Richard Hawkins))
2017-06-16 19:36:10  ★ Richard Hawkins would then kneel down  and places the items down on the ground, except the brake disc,
2017-06-16 19:36:18  ★ that would go straight to the wheelhub.      ((Richard Hawkins))
2017-06-16 19:37:57  ★ Richard Hawkins would then push on it with both his hands as he then reaches for the bracket and places it
2017-06-16 19:38:31  ★ in its place as he then reaches into his pocket and grabs the two bolts for the bracket.      ((Richard Hawkins))
2017-06-16 19:38:52  ★ Richard Hawkins would then handtighten the bolts as he'd then use the socketwrench to do the final tightenin
2017-06-16 19:39:55  ★ Richard Hawkins would then reach for the brake pads and takes them out of their packaging, placing them on
2017-06-16 19:40:08  ★ the slots on the bracket.      ((Richard Hawkins))
2017-06-16 19:40:26  ★ Richard Hawkins would then reach for the new caliper and 8mm wrench as he'd then connect the brake
2017-06-16 19:41:00  ★ line to the caliper and places the caliper on its slot.      ((Richard Hawkins))
2017-06-16 19:41:19  ★ Richard Hawkins would then reach for the slider bolts as he'd then handtighten the m.
2017-06-16 19:41:40  ★ Richard Hawkins would then reach for his wrench and tightens the caliper to the bracket as he then collects
2017-06-16 19:41:58  ★ all the tools that he used for brake swap and walks to the right side of the car.      ((Richard Hawkins))
2017-06-16 19:43:47  ★ Richard Hawkins would then kneel down and places his tools down on the ground as he then reaches
2017-06-16 19:44:08  ★ for the socket wrench and uses it to loosen up and remove the slider bolts, pocketing them      ((Richard Hawkins))
2017-06-16 19:44:27  ★ and reaches for the caliper after he has placed the socket wrench down on the ground,      ((Richard Hawkins))
2017-06-16 19:44:52  ★ pulling on the caliper, forcing all of the fluid into the reservoir.      ((Richard Hawkins))
2017-06-16 19:45:26  ★ Richard Hawkins would then reach for the 8mm wrench and disconnects the brakeline from the caliper
2017-06-16 19:45:35  ★ as he then places the caliper down on the ground.      ((Richard Hawkins))
2017-06-16 19:45:49  ★ Richard Hawkins would then reach for the socket wrench and uses it to loosen up and remove the bolts
2017-06-16 19:46:08  ★ from the bracket, lowering the bracket down on the floor with the bolts.      ((Richard Hawkins))
2017-06-16 19:46:26  ★ Richard Hawkins would then pull on the brake disc with both his hand, pulling the brake disc off of the
2017-06-16 19:46:37  ★ weelhub, dropping it on the ground as he'd then walk to the      ((Richard Hawkins))
2017-06-16 19:47:09  ★ shelf in the garage reaching into the previously opened cardboard box, taking out a new      ((Richard Hawkins))
2017-06-16 19:47:33  ★ bracket, caliper, disc and brakepads as he then carries them back to the BMW,      ((Richard Hawkins))
2017-06-16 19:47:59  ★ lowering the items to the floor as he kneels down, on the floor, taking out the brake      ((Richard Hawkins))
2017-06-16 19:48:21  ★ disc from the packaging as he then lifts it up onto the wheelhub with both his hands.      ((Richard Hawkins))
2017-06-16 19:49:50  ★ Richard Hawkins would then smile and reaches for the new bracket, unpacking it and reaches for
2017-06-16 19:50:16  ★ the new bolts as he'd then align the bolt holes with the wheelhub as he'd then handtighten      ((Richard Hawkins))
2017-06-16 19:50:37  ★ the bracket to the wheelhub, using the wrench afterwards , tightening the bolts.      ((Richard Hawkins))
2017-06-16 19:53:04  ★ Richard Hawkins would then reach for the brake pads, unpackaging them and sliding them on their slots.
2017-06-16 19:54:04  ★ Richard Hawkins would then reach for the caliper, unpacking it and reaches for the 8mm wrench as
2017-06-16 19:54:49  ★ he'd then use it to connect the brakeline to the new caliper.      ((Richard Hawkins))
2017-06-16 19:55:22  ★ Richard Hawkins would then place the brakecaliper onto the bracket and uses the sliding bolts as he then
2017-06-16 19:56:03  ★ handtightens them and uses the socketwrench afterwards , tightening the bolts .      ((Richard Hawkins))
2017-06-16 19:57:11  ★ Richard Hawkins would then stand up and walks to the impact wrench, disconnecting the pressure hose from it
2017-06-16 19:57:26  ★ as he then pulls the pressure hose to the front right of the car.      ((Richard Hawkins))
2017-06-16 19:58:16  ★ Richard Hawkins would then release it and walks tot he shelf in the garage as he then reaches for the
2017-06-16 19:58:40  ★ vacuum bleeder, carrying it over to the right of the car, connecting the pressure hose to it      ((Richard Hawkins))
2017-06-16 19:59:12  ★ as he then reaches for the 8mm wrench, placing it over the bleeder valve as he then reaches      ((Richard Hawkins))
2017-06-16 19:59:30  ★ for the nozzle of the bleeder and slides it over the bleeder valve.      ((Richard Hawkins))
★ Richard Hawkins would then hold down the trigger on the vacuum bleeder and twists the wrench counter
2017-06-16 20:00:32  ★ clockwise as the vacuum bleeder would then start to suck the brake fluid into the brake      ((Richard Hawkins))
2017-06-16 20:00:35  ★ caliper.      ((Richard Hawkins))
2017-06-16 20:00:54  ★ Richard Hawkins would eye the brake flud reservoir to make sure the brake fluid aint running low.
2017-06-16 20:01:09  ★ after he sees no more bubbles coming from the caliper he.      ((Richard Hawkins))
2017-06-16 20:01:48  ★ tightens the bleeding valve and releases the trigger as he'd then carry the      ((Richard Hawkins))
2017-06-16 20:02:13  ★ vacuum bleeder over to the left side of the car, placing it down on the floor as he then      ((Richard Hawkins))
2017-06-16 20:02:34  ★ walks to the shelf in the garage, grabbing onto the brake fluid container and carries it      ((Richard Hawkins))
2017-06-16 20:02:59  ★ over to the car as he thentwists off the cap from the brake reservoir and fills it up with      ((Richard Hawkins))
2017-06-16 20:03:06  ★ the brake fluid .      ((Richard Hawkins))
2017-06-16 20:03:38  ★ Richard Hawkins would then lower the canister down on the ground.
2017-06-16 20:04:05  ★ Richard Hawkins would then kneel down and places the 8mm wrench over the bleeder valve and
2017-06-16 20:04:17  ★ pushes the nozzle over the bleeder valve aswell as he then      ((Richard Hawkins))
2017-06-16 20:05:24  ★ holds down the trigger and loosens up the bleeding valve.      ((Richard Hawkins))
2017-06-16 20:05:39  ★ Richard Hawkins would then eye the brake reservoir and the hose at the same time.
2017-06-16 20:05:58  ★ Richard Hawkins would then tighten the bleeding valve after he sees no more airbubbles coming through the
2017-06-16 20:06:00  ★ hose.      ((Richard Hawkins))
2017-06-16 20:06:29  ★ Richard Hawkins would then pull the nozzle off the bleeder valve and disconnects the vacuum bleeder from the
2017-06-16 20:06:43  ★ presure hose and takes it over to the shelf in the garage.      ((Richard Hawkins))
2017-06-16 20:07:06  ★ Richard Hawkins would then walk back to the car and fills up the brake reservoir as he'd then twist the cap
2017-06-16 20:07:21  ★ on it and takes the brake fluid container back to the shelf in the garage.      ((Richard Hawkins))
2017-06-16 20:11:49  ★ Richard Hawkins would then open one of the cardboard boxes in the shelf, as it'd contain the new coilover
2017-06-16 20:11:56  ★ s.      ((Richard Hawkins))
2017-06-16 20:12:30  ★ Richard Hawkins would then reach for one of the front coilovers and new  sway bar end link as he'd then
2017-06-16 20:12:50  ★ carry it over to the right of the car along with the bag of new bolts and nuts.      ((Richard Hawkins))
2017-06-16 20:14:16  ★ Richard Hawkins would then kneel down, lowering the new stuff infront of his knees as he then unpacks the
2017-06-16 20:14:43  ★ new coilover and opens the bag with nuts, grabbing ahold of couple of nuts.      ((Richard Hawkins))
2017-06-16 20:15:12  ★ Richard Hawkins would then grab the coilover with his left hand lifting it to the car and aligns the top
2017-06-16 20:15:31  ★ bolts with the holes in the chassis , keepin coilover in place      ((Richard Hawkins))
2017-06-16 20:16:06  ★ as he'd handtighten the nuts onto the top bolts, allowing the coilover to rest on the chassi      ((Richard Hawkins))
2017-06-16 20:16:38  ★ Richard Hawkins would then reach for the couple of bolts as he'd then slide them into their holes, connectin
2017-06-16 20:16:50  ★ g the wheelhub to the coilover.      ((Richard Hawkins))
2017-06-16 20:19:20  ★ Richard Hawkins would then handtighten the nuts on the bolts and reaches for the sway bar end link
2017-06-16 20:19:29  ★ and connects it to the sway bar and the coilover.      ((Richard Hawkins))
2017-06-16 20:20:00  ★ Richard Hawkins would then walk to the rear of the car, connecting the impact gun to the pressure hose as
2017-06-16 20:20:30  ★ he then walks back to the right front of the car and uses the impact gun to tighten all of      ((Richard Hawkins))
2017-06-16 20:20:41  ★ the nuts, securing the coilover to the car.      ((Richard Hawkins))
2017-06-16 20:22:30  ★ Richard Hawkins would then carry the tools over to the other side of the car as he then walks over to
2017-06-16 20:22:35  ★ the shelf again.      ((Richard Hawkins))
2017-06-16 20:23:59  ★ Richard Hawkins would then grab ahold of the second front coilover and the sway bar end link and
2017-06-16 20:24:07  ★ carries it over to the car after      ((Richard Hawkins))
2017-06-16 20:24:20  ★ he has unpacked them, kneeling down to the left front of the car.      ((Richard Hawkins))
2017-06-16 20:25:36  ★ Richard Hawkins would then reach for couple of new nuts from the bag and moves his left hand to the coilover
2017-06-16 20:25:57  ★ moving it to its place as he'd then use his right hand to handtighten the top nuts.      ((Richard Hawkins))
2017-06-16 20:26:26  ★ Richard Hawkins would then reach for couple of bolts, sliding them to their slots, connecting the
2017-06-16 20:26:52  ★ the coilover to the wheelhub as he'd then twist some nuts on the bolts, handtightening them.      ((Richard Hawkins))
2017-06-16 20:27:14  ★ Richard Hawkins would then connect the sway bar end link the same manner he did with the last one as he then
2017-06-16 20:27:45  ★ reaches for the impact gun, tightening all of the nuts, securing the coilover to the chassis      ((Richard Hawkins))
2017-06-16 20:27:48  ★ and wheelhub.      ((Richard Hawkins))
2017-06-16 20:29:40  ★ Richard Hawkins would then carry the impact gun to the rear of the car, setting it into the trunk.
2017-06-16 20:30:13  ★ Richard Hawkins would then walk to the shelf and reaches for one of the rear coilovers, unpacking them and
2017-06-16 20:30:34  ★ and grabs the bag with nuts with him aswell, carrying them to the rear of the car.      ((Richard Hawkins))
2017-06-16 20:31:15  ★ Richard Hawkins would then crouch down to the rear right of the car, sliding the top mount of the coilover
2017-06-16 20:31:49  ★ in its place as he then stands up and walks to the rear of the car, handtightening two nuts      ((Richard Hawkins))
2017-06-16 20:32:03  ★ , somewhat securing the coilover to the chassis.      ((Richard Hawkins))
2017-06-16 20:32:35  ★ Richard Hawkins would then use the impact gun as he then tightens the two nuts, as he then places it back in
2017-06-16 20:33:13  ★ the trunk and walks back to the shelf , grabbing ahold of the last coilover and unpacks it a      ((Richard Hawkins))
2017-06-16 20:33:38  ★ and carries it back to the car, kneeling down to the rear left of the car, aligning the top      ((Richard Hawkins))
2017-06-16 20:34:01  ★ mounts of the coilover as he then walks to the rear of the car, reaching into the trunk,      ((Richard Hawkins))
2017-06-16 20:34:23  ★ handtightening the two nuts as he then uses the impact gun to secure the coilover      ((Richard Hawkins))
2017-06-16 20:34:31  ★ to the chassis of the car.      ((Richard Hawkins))
2017-06-16 20:34:51  ★ Richard Hawkins would then walk to the right of the car, carrying the impact gun with him and pulls the
2017-06-16 20:35:14  ★ the coilover to its place on the rear axle as he then handtightens then nut on it, using      ((Richard Hawkins))
2017-06-16 20:35:38  ★ the impact gun to tighten the nut and walks over to the other side, pulling that      ((Richard Hawkins))
2017-06-16 20:36:01  ★ coilovers lower mount to its position, tightening the nut with the impact gun.      ((Richard Hawkins))
2017-06-16 20:36:56  ★ Richard Hawkins would then stand back up and starts to clean up everything except the impact wrench,
2017-06-16 20:37:06  ★ connecting the 19mm socket to the impact gun.      ((Richard Hawkins))
2017-06-16 20:38:10  ★ Richard Hawkins would then walk over to the wall in the garage and grabs onto the two new wheels and
2017-06-16 20:38:40  ★ rims, rolling two of them over to the right of the car, as he'd then lean one of the on the      ((Richard Hawkins))
2017-06-16 20:39:00  ★ front wheelhub and rolls the second one to the rear as he then lifts it up onto the wheelhub      ((Richard Hawkins))
2017-06-16 20:39:20  ★ as he then walks to the front one, lifting that on the wheelhub aswell as he then walks back      ((Richard Hawkins))
2017-06-16 20:39:46  ★ to the other two tires, rolling them to the left of the car and lifts them onto the wheelhub      ((Richard Hawkins))
2017-06-16 20:39:54  ★ s of front and back of the car.      ((Richard Hawkins))
2017-06-16 20:40:41  ★ Richard Hawkins would then walk over to the impact gun and starts tightening the lugnuts to secure
2017-06-16 20:40:56  ★ all four wheels to the car, making sure not to damage the rims as he does so.      ((Richard Hawkins))
2017-06-16 20:41:15  ★ Richard Hawkins would then disconnect the impact gun from the pressure hose, placing everything back to its
2017-06-16 20:41:37  ★ place as he then walks to the controlpad of the lift and      ((Richard Hawkins))
2017-06-16 20:41:53  ★ moves his right hand up, pressing one a button, lowering the car down on its wheels.      ((Richard Hawkins))
2017-06-16 20:42:53  ★ Richard Hawkins would then walk to the sink in the garage as he'd then proceed to wash his hands,
2017-06-16 20:43:19  ★ walking back to the car afterwards, pulling open the drivers side door and turns on the      ((Richard Hawkins))
2017-06-16 20:43:50  ★ ignition as he sits in the car, turning the engine on as he then reaches for his phone      ((Richard Hawkins))
2017-06-16 20:44:05  ★ and starts to google how to disable traction control in E46 M3's      ((Richard Hawkins))
2017-06-16 20:44:27  ★ Richard Hawkins would then open a forum page and reads it a little  as he then afterwards  pushes down
2017-06-16 20:44:52  ★ on the DSC button for about four seconds waiting for a yellow triangle to flash on the dash.      ((Richard Hawkins))