API tools faq
paste
Advertisement
Bullet64

0.7.13_2

Bullet64
Mar 4th, 2019
200
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 66.70 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Willkommen zu minicom 2.7
  3.  
  4. Optionen: I18n
  5. Übersetzt am Apr 22 2017, 09:14:19.
  6. Port /dev/ttyUSB0, 10:12:55
  7.  
  8. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  9. DDR Version 1.13 20180801
  10. In
  11. Channel 0: LPDDR4,50MHz
  12. CS = 0
  13. MR0=0x98
  14. MR4=0x3
  15. MR5=0xFF
  16. MR8=0x8
  17. MR12=0x4D
  18. MR14=0x4D
  19. MR18=0x0
  20. MR19=0x0
  21. MR24=0x8
  22. MR25=0x0
  23. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  24. Channel 1: LPDDR4,50MHz
  25. CS = 0
  26. MR0=0x98
  27. MR4=0x3
  28. MR5=0xFF
  29. MR8=0x8
  30. MR12=0x4D
  31. MR14=0x4D
  32. MR18=0x0
  33. MR19=0x0
  34. MR24=0x8
  35. MR25=0x0
  36. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  37. 256B stride
  38. channel 0
  39. CS = 0
  40. MR0=0x98
  41. MR4=0x81
  42. MR5=0xFF
  43. MR8=0x8
  44. MR12=0x72
  45. MR14=0x72
  46. MR18=0x0
  47. MR19=0x0
  48. MR24=0x8
  49. MR25=0x0
  50. channel 1
  51. CS = 0
  52. MR0=0x98
  53. MR4=0x81
  54. MR5=0xFF
  55. MR8=0x8
  56. MR12=0x72
  57. MR14=0x72
  58. MR18=0x0
  59. MR19=0x0
  60. MR24=0x8
  61. MR25=0x0
  62. channel 0 training pass!
  63. channel 1 training pass!
  64. change freq to 400MHz 0,1
  65. channel 0
  66. CS = 0
  67. MR0=0x98
  68. MR4=0x1
  69. MR5=0xFF
  70. MR8=0x8
  71. MR12=0x72
  72. MR14=0x72
  73. MR18=0x0
  74. MR19=0x0
  75. MR24=0x8
  76. MR25=0x0
  77. channel 1
  78. CS = 0
  79. MR0=0x98
  80. MR4=0x1
  81. MR5=0xFF
  82. MR8=0x8
  83. MR12=0x72
  84. MR14=0x72
  85. MR18=0x0
  86. MR19=0x0
  87. MR24=0x8
  88. MR25=0x0
  89. channel 0 training pass!
  90. channel 1 training pass!
  91. change freq to 800MHz 1,0
  92. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  93. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  94. pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
  95. OUT
  96. U-Boot SPL board init
  97.  
  98. U-Boot SPL 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:09)
  99. booted from SD
  100. Trying to boot from MMC2
  101. NOTICE: BL31: v1.3(debug):65aa5ce
  102. NOTICE: BL31: Built : 10:47:37, Jun 19 2018
  103. NOTICE: BL31: Rockchip release version: v1.1
  104. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  105. INFO: Using opteed sec cpu_context!
  106. INFO: boot cpu mask: 0
  107. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  108. INFO: BL31: Initializing runtime services
  109. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
  110. ERROR: Error initializing runtime service opteed_fast
  111. INFO: BL31: Preparing for EL3 exit to normal world
  112. INFO: Entry point address = 0x200000
  113. INFO: SPSR = 0x3c9
  114.  
  115.  
  116. U-Boot 2017.09-rockchip-ayufan-1035-gd646df03ac (Oct 26 2018 - 08:36:24 +0000)
  117.  
  118. Model: Pine64 RockPro64
  119. DRAM: 2 GiB
  120. DCDC_REG1@vdd_center: ; enabling
  121. DCDC_REG2@vdd_cpu_l: ; enabling
  122. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  123. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  124. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  125. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  126. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  127. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  128. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  129. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  130. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  131. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  132. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  133. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  134. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  135. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  136. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  137. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  138. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  139. vdd-log@vdd_log: ; enabling (ret: -38)
  140. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  141. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  142. *** Warning - bad CRC, using default environment
  143.  
  144. In: serial@ff1a0000
  145. Out: serial@ff1a0000
  146. Err: serial@ff1a0000
  147. Model: Pine64 RockPro64
  148. Net: eth0: ethernet@fe300000
  149. Hit any key to stop autoboot: 0
  150. Card did not respond to voltage select!
  151. mmc_init: -95, time 19
  152. switch to partitions #0, OK
  153. mmc1 is current device
  154. Scanning mmc 1:7...
  155. Found /boot/extlinux/extlinux.conf
  156. Retrieving file: /boot/extlinux/extlinux.conf
  157. 1055 bytes read in 19 ms (53.7 KiB/s)
  158. select kernel
  159. 1: kernel-4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b
  160. 2: kernel-4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b-memtest
  161. Enter choice: 1: kernel-4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b
  162. Retrieving file: /boot/initrd.img-4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b
  163. 6524710 bytes read in 711 ms (8.8 MiB/s)
  164. Retrieving file: /boot/vmlinuz-4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b
  165. 19986440 bytes read in 2132 ms (8.9 MiB/s)
  166. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  167. Retrieving file: /boot/dtbs/4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b/rockchipb
  168. 88022 bytes read in 105 ms (818.4 KiB/s)
  169. ## Flattened Device Tree blob at 01f00000
  170. Booting using the fdt blob at 0x1f00000
  171. Loading Ramdisk to 7d8c9000, end 7df01f26 ... OK
  172. Loading Device Tree to 000000007d8b0000, end 000000007d8c87d5 ... OK
  173.  
  174. Starting kernel ...
  175.  
  176. [ 0.000000] Booting Linux on physical CPU 0x0
  177. [ 0.000000] Initializing cgroup subsys cpuset
  178. [ 0.000000] Initializing cgroup subsys cpu
  179. [ 0.000000] Initializing cgroup subsys cpuacct
  180. [ 0.000000] Linux version 4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b (root@r9
  181. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  182. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  183. [ 0.000000] bootconsole [uart0] enabled
  184. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  185. [ 0.000000] psci: probing for conduit method from DT.
  186. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  187. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  188. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  189. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef2000 s46248 r8192 d316
  190. [ 0.000000] Detected VIPT I-cache on CPU0
  191. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  192. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  193. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  194. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  195. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  196. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  197. [ 0.000000] software IO TLB [mem 0x7feaa000-0x7feea000] (0MB) mapped at [fff]
  198. [ 0.000000] Memory: 2031080K/2095104K available (12158K kernel code, 1726K r)
  199. [ 0.000000] Virtual kernel memory layout:
  200. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  201. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  202. [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 )
  203. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 )
  204. [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 )
  205. [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 )
  206. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  207. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  208. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  209. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  210. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  211. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  212. [ 0.000000] Hierarchical RCU implementation.
  213. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  214. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  215. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  216. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  217. [ 0.000000] GIC: Using split EOI/Deactivate mode
  218. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  219. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  220. [ 0.000000] ITS: using cache flushing for cmd queue
  221. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  222. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  223. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  224. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  225. [ 0.000000] GIC: using cache flushing for LPI property table
  226. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  227. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  228. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  229. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  230. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  231. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  232. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  233. [ 0.002060] Console: colour dummy device 80x25
  234. [ 0.002484] console [tty0] enabled
  235. [ 0.002811] bootconsole [uart0] disabled
  236. [ 0.000000] Booting Linux on physical CPU 0x0
  237. [ 0.000000] Initializing cgroup subsys cpuset
  238. [ 0.000000] Initializing cgroup subsys cpu
  239. [ 0.000000] Initializing cgroup subsys cpuacct
  240. [ 0.000000] Linux version 4.4.154-1134-rockchip-ayufan-g0d09c8d7de9b (root@r9
  241. [ 0.000000] Boot CPU: AArch64 Processor [410fd034]
  242. [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  243. [ 0.000000] bootconsole [uart0] enabled
  244. [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
  245. [ 0.000000] psci: probing for conduit method from DT.
  246. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  247. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  248. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  249. [ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef2000 s46248 r8192 d316
  250. [ 0.000000] Detected VIPT I-cache on CPU0
  251. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  252. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
  253. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb4
  254. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  255. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  256. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  257. [ 0.000000] software IO TLB [mem 0x7feaa000-0x7feea000] (0MB) mapped at [fff]
  258. [ 0.000000] Memory: 2031080K/2095104K available (12158K kernel code, 1726K r)
  259. [ 0.000000] Virtual kernel memory layout:
  260. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
  261. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
  262. [ 0.000000] .init : 0xffffff80090b0000 - 0xffffff80091e0000 ( 1216 )
  263. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008c60000 ( 12160 )
  264. [ 0.000000] .rodata : 0xffffff8008c60000 - 0xffffff80090b0000 ( 4416 )
  265. [ 0.000000] .data : 0xffffff80091e0000 - 0xffffff800938f808 ( 1727 )
  266. [ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 )
  267. [ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 )
  268. [ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 )
  269. [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
  270. [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 )
  271. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  272. [ 0.000000] Hierarchical RCU implementation.
  273. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  274. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  275. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  276. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  277. [ 0.000000] GIC: Using split EOI/Deactivate mode
  278. [ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  279. [ 0.000000] ITS: allocated 65536 Devices @7cd00000 (psz 64K, shr 0)
  280. [ 0.000000] ITS: using cache flushing for cmd queue
  281. [ 0.000000] GIC: using LPI property table @0x000000007cc90000
  282. [ 0.000000] ITS: Allocated 1792 chunks for LPIs
  283. [ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  284. [ 0.000000] CPU0: using LPI pending table @0x000000007cca0000
  285. [ 0.000000] GIC: using cache flushing for LPI property table
  286. [ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cp}
  287. [ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /}
  288. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frack
  289. [ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frack
  290. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  291. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  292. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  293. [ 0.002060] Console: colour dummy device 80x25
  294. [ 0.002484] console [tty0] enabled
  295. [ 0.002811] bootconsole [uart0] disabled
  296. [ 0.003197] Calibrating delay loop (skipped), value calculated using timer f)
  297. [ 0.003224] pid_max: default: 32768 minimum: 301
  298. [ 0.003342] Security Framework initialized
  299. [ 0.003357] Yama: becoming mindful.
  300. [ 0.003387] AppArmor: AppArmor disabled by boot time parameter
  301. [ 0.003450] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  302. [ 0.003470] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  303. [ 0.004161] Initializing cgroup subsys io
  304. [ 0.004186] Initializing cgroup subsys memory
  305. [ 0.004223] Initializing cgroup subsys devices
  306. [ 0.004242] Initializing cgroup subsys freezer
  307. [ 0.004261] Initializing cgroup subsys net_cls
  308. [ 0.004279] Initializing cgroup subsys perf_event
  309. [ 0.004299] Initializing cgroup subsys net_prio
  310. [ 0.004322] Initializing cgroup subsys hugetlb
  311. [ 0.004338] Initializing cgroup subsys pids
  312. [ 0.004384] ftrace: allocating 45079 entries in 177 pages
  313. [ 0.110816] sched-energy: Sched-energy-costs installed from DT
  314. [ 0.110843] CPU0: update cpu_capacity 401
  315. [ 0.110905] ASID allocator initialised with 32768 entries
  316. [ 0.113925] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  317. [ 0.114381] Platform MSI: /interrupt-controller@fee00000/interrupt-controlled
  318. [ 0.115669] Detected VIPT I-cache on CPU1
  319. [ 0.115698] CPU1: found redistributor 1 region 0:0x00000000fef20000
  320. [ 0.115723] CPU1: using LPI pending table @0x000000007cf30000
  321. [ 0.115767] CPU1: update cpu_capacity 401
  322. [ 0.115770] CPU1: Booted secondary processor [410fd034]
  323. [ 0.116296] Detected VIPT I-cache on CPU2
  324. [ 0.116316] CPU2: found redistributor 2 region 0:0x00000000fef40000
  325. [ 0.116339] CPU2: using LPI pending table @0x000000007cf60000
  326. [ 0.116366] CPU2: update cpu_capacity 401
  327. [ 0.116369] CPU2: Booted secondary processor [410fd034]
  328. [ 0.116882] Detected VIPT I-cache on CPU3
  329. [ 0.116902] CPU3: found redistributor 3 region 0:0x00000000fef60000
  330. [ 0.116924] CPU3: using LPI pending table @0x000000007cfb0000
  331. [ 0.116951] CPU3: update cpu_capacity 401
  332. [ 0.116954] CPU3: Booted secondary processor [410fd034]
  333. [ 0.117467] Detected PIPT I-cache on CPU4
  334. [ 0.117491] CPU4: found redistributor 100 region 0:0x00000000fef80000
  335. [ 0.117525] CPU4: using LPI pending table @0x000000007cfe0000
  336. [ 0.117561] CPU4: update cpu_capacity 1024
  337. [ 0.117565] CPU4: Booted secondary processor [410fd082]
  338. [ 0.118137] Detected PIPT I-cache on CPU5
  339. [ 0.118155] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  340. [ 0.118188] CPU5: using LPI pending table @0x000000007c420000
  341. [ 0.118215] CPU5: update cpu_capacity 1024
  342. [ 0.118218] CPU5: Booted secondary processor [410fd082]
  343. [ 0.118300] Brought up 6 CPUs
  344. [ 0.118977] SMP: Total of 6 processors activated.
  345. [ 0.119008] CPU features: detected feature: GIC system register CPU interface
  346. [ 0.119046] CPU: All CPU(s) started at EL2
  347. [ 0.119111] alternatives: patching kernel code
  348. [ 0.120496] devtmpfs: initialized
  349. [ 0.136031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  350. [ 0.136087] futex hash table entries: 2048 (order: 5, 131072 bytes)
  351. [ 0.136565] xor: measuring software checksum speed
  352. [ 0.173912] 8regs : 2874.000 MB/sec
  353. [ 0.213972] 8regs_prefetch: 2570.000 MB/sec
  354. [ 0.254033] 32regs : 3243.000 MB/sec
  355. [ 0.294094] 32regs_prefetch: 2865.000 MB/sec
  356. [ 0.294114] xor: using function: 32regs (3243.000 MB/sec)
  357. [ 0.294145] pinctrl core: initialized pinctrl subsystem
  358. [ 0.295731] Failed to find legacy iommu devices
  359. [ 0.296121] NET: Registered protocol family 16
  360. [ 0.306461] cpuidle: using governor ladder
  361. [ 0.318485] cpuidle: using governor menu
  362. [ 0.318812] vdso: 2 pages (1 code @ ffffff8008c66000, 1 data @ ffffff80091e4)
  363. [ 0.318866] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  364. [ 0.319300] DMA: preallocated 1024 KiB pool for atomic allocations
  365. [ 0.426402] raid6: int64x1 gen() 474 MB/s
  366. [ 0.494429] raid6: int64x1 xor() 404 MB/s
  367. [ 0.562521] raid6: int64x2 gen() 655 MB/s
  368. [ 0.630646] raid6: int64x2 xor() 594 MB/s
  369. [ 0.698774] raid6: int64x4 gen() 1011 MB/s
  370. [ 0.766826] raid6: int64x4 xor() 666 MB/s
  371. [ 0.834977] raid6: int64x8 gen() 753 MB/s
  372. [ 0.903030] raid6: int64x8 xor() 631 MB/s
  373. [ 0.971155] raid6: neonx1 gen() 994 MB/s
  374. [ 1.039251] raid6: neonx1 xor() 670 MB/s
  375. [ 1.107380] raid6: neonx2 gen() 1330 MB/s
  376. [ 1.175477] raid6: neonx2 xor() 1006 MB/s
  377. [ 1.243580] raid6: neonx4 gen() 1802 MB/s
  378. [ 1.311680] raid6: neonx4 xor() 1225 MB/s
  379. [ 1.379760] raid6: neonx8 gen() 1695 MB/s
  380. [ 1.447877] raid6: neonx8 xor() 1267 MB/s
  381. [ 1.447896] raid6: using algorithm neonx4 gen() 1802 MB/s
  382. [ 1.447914] raid6: .... xor() 1225 MB/s, rmw enabled
  383. [ 1.447933] raid6: using intx1 recovery algorithm
  384. [ 1.449498] vcc3v3_pcie: supplied by dc_12v
  385. [ 1.450048] vcc_sys: supplied by dc_12v
  386. [ 1.450558] vcc3v3_sys: supplied by vcc_sys
  387. [ 1.451670] iommu: Adding device ff8f0000.vop to group 0
  388. [ 1.451771] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  389. [ 1.451791] iommu: Removing device ff8f0000.vop from group 0
  390. [ 1.451867] iommu: Adding device ff900000.vop to group 0
  391. [ 1.453075] SCSI subsystem initialized
  392. [ 1.453434] usbcore: registered new interface driver usbfs
  393. [ 1.453491] usbcore: registered new interface driver hub
  394. [ 1.453585] usbcore: registered new device driver usb
  395. [ 1.453692] media: Linux media interface: v0.10
  396. [ 1.453740] Linux video capture interface: v2.00
  397. [ 1.453815] pps_core: LinuxPPS API ver. 1 registered
  398. [ 1.453834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  399. [ 1.453876] PTP clock support registered
  400. [ 1.454935] Advanced Linux Sound Architecture Driver Initialized.
  401. [ 1.455454] Bluetooth: Core ver 2.21
  402. [ 1.455493] NET: Registered protocol family 31
  403. [ 1.455512] Bluetooth: HCI device and connection manager initialized
  404. [ 1.455537] Bluetooth: HCI socket layer initialized
  405. [ 1.455559] Bluetooth: L2CAP socket layer initialized
  406. [ 1.455595] Bluetooth: SCO socket layer initialized
  407. [ 1.456000] NetLabel: Initializing
  408. [ 1.456020] NetLabel: domain hash size = 128
  409. [ 1.456037] NetLabel: protocols = UNLABELED CIPSOv4
  410. [ 1.456087] NetLabel: unlabeled traffic allowed by default
  411. [ 1.456883] clocksource: Switched to clocksource arch_sys_counter
  412. [ 1.520163] thermal thermal_zone1: power_allocator: sustainable_power will bd
  413. [ 1.520404] NET: Registered protocol family 2
  414. [ 1.520848] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  415. [ 1.521014] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  416. [ 1.521424] TCP: Hash tables configured (established 16384 bind 16384)
  417. [ 1.521523] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  418. [ 1.521620] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  419. [ 1.521905] NET: Registered protocol family 1
  420. [ 1.522210] RPC: Registered named UNIX socket transport module.
  421. [ 1.522232] RPC: Registered udp transport module.
  422. [ 1.522251] RPC: Registered tcp transport module.
  423. [ 1.522269] RPC: Registered tcp NFSv4.1 backchannel transport module.
  424. [ 1.522962] Trying to unpack rootfs image as initramfs...
  425. [ 1.837373] Freeing initrd memory: 6368K
  426. [ 1.837959] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  427. [ 1.838075] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  428. [ 1.839180] kvm [1]: 8-bit VMID
  429. [ 1.839201] kvm [1]: Hyp mode initialized successfully
  430. [ 1.839338] kvm [1]: interrupt-controller@fff20000 IRQ10
  431. [ 1.839548] kvm [1]: timer IRQ12
  432. [ 1.842539] audit: initializing netlink subsys (disabled)
  433. [ 1.842605] audit: type=2000 audit(1.776:1): initialized
  434. [ 1.843325] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  435. [ 1.850658] VFS: Disk quotas dquot_6.6.0
  436. [ 1.850829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  437. [ 1.852239] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  438. [ 1.853435] NFS: Registering the id_resolver key type
  439. [ 1.853481] Key type id_resolver registered
  440. [ 1.853499] Key type id_legacy registered
  441. [ 1.853530] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  442. [ 1.854198] fuse init (API version 7.23)
  443. [ 1.854925] JFS: nTxBlock = 8192, nTxLock = 65536
  444. [ 1.860196] SGI XFS with ACLs, security attributes, realtime, no debug enabld
  445. [ 1.862369] Key type big_key registered
  446. [ 1.862445]
  447. [ 1.862445] TEE Core Framework initialization (ver 1:0.1)
  448. [ 1.862488] TEE armv7 Driver initialization
  449. [ 1.862886] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  450. [ 1.862910] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  451. [ 1.863116] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  452. [ 1.867060] NET: Registered protocol family 38
  453. [ 1.867106] Key type asymmetric registered
  454. [ 1.867131] Asymmetric key parser 'x509' registered
  455. [ 1.867325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  456. [ 1.867495] io scheduler noop registered
  457. [ 1.867522] io scheduler deadline registered (default)
  458. [ 1.867572] io scheduler cfq registered
  459. [ 1.869098] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS suppr
  460. [ 1.874625] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  461. [ 1.874666] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  462. [ 1.876128] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  463. [ 1.876164] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  464. [ 1.877369] pwm-regulator: supplied by vcc_sys
  465. [ 1.878008] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  466. [ 1.879673] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud =A
  467. [ 1.880277] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud =A
  468. [ 1.997231] console [ttyS2] enabled
  469. [ 1.998613] [drm] Initialized drm 1.1.0 20060810
  470. [ 2.002734] [drm] Rockchip DRM driver version: v1.0.1
  471. [ 2.003682] usbcore: registered new interface driver udl
  472. [ 2.005460] Unable to detect cache hierarchy for CPU 0
  473. [ 2.006677] brd: module loaded
  474. [ 2.012439] loop: module loaded
  475. [ 2.012769] lkdtm: No crash points registered, enable through debugfs
  476. [ 2.014785] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  477. [ 2.015391] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  478. [ 2.015990] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  479. [ 2.017136] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  480. [ 2.017627] 3 ofpart partitions found on MTD device spi32766.0
  481. [ 2.018157] Creating 3 MTD partitions on "spi32766.0":
  482. [ 2.018631] 0x000000000000-0x0000003f8000 : "loader"
  483. [ 2.019981] 0x0000003f8000-0x000000400000 : "env"
  484. [ 2.021277] 0x0000007c0000-0x000000800000 : "vendor"
  485. [ 2.023994] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  486. [ 2.024714] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  487. [ 2.025374] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  488. [ 2.025892] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  489. [ 2.026423] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  490. [ 2.027158] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  491. [ 2.027787] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  492. [ 2.033344] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  493. [ 2.033971] stmmac - user ID: 0x10, Synopsys ID: 0x35
  494. [ 2.034431] Ring mode enabled
  495. [ 2.034716] DMA HW capability register supported
  496. [ 2.035119] Normal descriptors
  497. [ 2.035439] RX Checksum Offload Engine supported (type 2)
  498. [ 2.035936] Wake-Up On Lan supported
  499. [ 2.036304] Enable RX Mitigation via HW Watchdog Timer
  500. [ 2.115854] libphy: stmmac: probed
  501. [ 2.116200] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  502. [ 2.116794] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  503. [ 2.119396] Rockchip WiFi SYS interface (V1.00) ...
  504. [ 2.119945] usbcore: registered new interface driver cdc_ether
  505. [ 2.120511] usbcore: registered new interface driver rndis_host
  506. [ 2.122434] rockchip-dwc3 usb0: failed to get drvdata dwc3
  507. [ 2.128169] rockchip-dwc3 usb1: fail to get drvdata hcd
  508. [ 2.130280] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  509. [ 2.130934] ehci-pci: EHCI PCI platform driver
  510. [ 2.131433] ehci-platform: EHCI generic platform driver
  511. [ 2.135984] ehci-platform fe3c0000.usb: EHCI Host Controller
  512. [ 2.136682] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus1
  513. [ 2.137509] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
  514. [ 2.148927] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  515. [ 2.149787] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  516. [ 2.150416] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
  517. [ 2.151098] usb usb1: Product: EHCI Host Controller
  518. [ 2.151558] usb usb1: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  519. [ 2.152354] usb usb1: SerialNumber: fe3c0000.usb
  520. [ 2.153447] hub 1-0:1.0: USB hub found
  521. [ 2.153836] hub 1-0:1.0: 1 port detected
  522. [ 2.155051] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  523. [ 2.155640] ohci-platform: OHCI generic platform driver
  524. [ 2.156805] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  525. [ 2.157641] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus2
  526. [ 2.158429] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
  527. [ 2.217055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  528. [ 2.217672] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
  529. [ 2.218335] usb usb2: Product: Generic Platform OHCI controller
  530. [ 2.218871] usb usb2: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  531. [ 2.219645] usb usb2: SerialNumber: fe3e0000.usb
  532. [ 2.220612] hub 2-0:1.0: USB hub found
  533. [ 2.221022] hub 2-0:1.0: 1 port detected
  534. [ 2.223763] usbcore: registered new interface driver iforce
  535. [ 2.224358] usbcore: registered new interface driver xpad
  536. [ 2.225334] usbcore: registered new interface driver usbtouchscreen
  537. [ 2.226253] .. rk pwm remotectl v1.1 init
  538. [ 2.226949] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/inpu0
  539. [ 2.228433] i2c /dev entries driver
  540. [ 2.229988] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  541. [ 2.230727] fan53555-reg: supplied by vcc_sys
  542. [ 2.233824] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  543. [ 2.234529] fan53555-reg: supplied by vcc_sys
  544. [ 2.237764] rk808 0-001b: Pmic Chip id: 0x0
  545. [ 2.241689] rk808-regulator rk808-regulator: there is no dvs0 gpio
  546. [ 2.242327] rk808-regulator rk808-regulator: there is no dvs1 gpio
  547. [ 2.243012] DCDC_REG1: supplied by vcc_sys
  548. [ 2.244292] DCDC_REG2: supplied by vcc_sys
  549. [ 2.245419] DCDC_REG3: supplied by vcc_sys
  550. [ 2.246204] DCDC_REG4: supplied by vcc_sys
  551. [ 2.247147] LDO_REG1: supplied by vcc_sys
  552. [ 2.248781] LDO_REG2: supplied by vcc_sys
  553. [ 2.250287] LDO_REG3: supplied by vcc_sys
  554. [ 2.251786] LDO_REG4: supplied by vcc_sys
  555. [ 2.253296] LDO_REG5: supplied by vcc_sys
  556. [ 2.254806] LDO_REG6: supplied by vcc_sys
  557. [ 2.256293] LDO_REG7: supplied by vcc_sys
  558. [ 2.257782] LDO_REG8: supplied by vcc_sys
  559. [ 2.259249] SWITCH_REG1: supplied by vcc3v3_sys
  560. [ 2.260098] SWITCH_REG2: supplied by vcc3v3_sys
  561. [ 2.264437] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  562. [ 2.265537] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  563. [ 2.267073] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  564. [ 2.269338] fusb302 4-0022: Can't get property of role, set role to default P
  565. [ 2.278439] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, trE
  566. [ 2.279296] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800940
  567. [ 2.281477] IR NEC protocol handler initialized
  568. [ 2.281912] IR RC5(x/sz) protocol handler initialized
  569. [ 2.282391] IR RC6 protocol handler initialized
  570. [ 2.282824] IR JVC protocol handler initialized
  571. [ 2.283255] IR Sony protocol handler initialized
  572. [ 2.283695] IR SANYO protocol handler initialized
  573. [ 2.284143] IR Sharp protocol handler initialized
  574. [ 2.284591] IR MCE Keyboard/mouse protocol handler initialized
  575. [ 2.285165] IR XMP protocol handler initialized
  576. [ 2.286473] usbcore: registered new interface driver uvcvideo
  577. [ 2.287004] USB Video Class driver (1.1.1)
  578. [ 2.291569] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, te7
  579. [ 2.292604] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  580. [ 2.294808] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-m
  581. [ 2.295604] Bluetooth: Virtual HCI driver ver 1.5
  582. [ 2.296219] Bluetooth: HCI UART driver ver 2.3
  583. [ 2.296642] Bluetooth: HCI UART protocol H4 registered
  584. [ 2.297145] Bluetooth: HCI UART protocol LL registered
  585. [ 2.297623] Bluetooth: HCI UART protocol ATH3K registered
  586. [ 2.298202] usbcore: registered new interface driver bfusb
  587. [ 2.298794] usbcore: registered new interface driver btusb
  588. [ 2.299869] cpu cpu0: Failed to get leakage
  589. [ 2.300379] cpu cpu0: Failed to get pvtm
  590. [ 2.301136] cpu cpu4: Failed to get leakage
  591. [ 2.301622] cpu cpu4: Failed to get pvtm
  592. [ 2.307585] sdhci: Secure Digital Host Controller Interface driver
  593. [ 2.308162] sdhci: Copyright(c) Pierre Ossman
  594. [ 2.308576] Synopsys Designware Multimedia Card Interface Driver
  595. [ 2.310312] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  596. [ 2.312293] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  597. [ 2.313079] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  598. [ 2.313713] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  599. [ 2.314299] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bio
  600. [ 2.315218] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was.
  601. [ 2.316121] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  602. [ 2.317068] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  603. [ 2.317779] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  604. [ 2.332955] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  605. [ 2.350055] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  606. [ 2.353165] sdhci-pltfm: SDHCI platform and OF driver helper
  607. [ 2.358218] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  608. [ 2.358778] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  609. [ 2.393040] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  610. [ 2.397239] hidraw: raw HID events driver (C) Jiri Kosina
  611. [ 2.402331] usbcore: registered new interface driver usbhid
  612. [ 2.402855] usbhid: USB HID core driver
  613. [ 2.407269] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000e
  614. [ 2.408281] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000e
  615. [ 2.409453] usbcore: registered new interface driver snd-usb-audio
  616. [ 2.411183] es8316 1-0010: Can not read property spk_ctl_gpio
  617. [ 2.420176] u32 classifier
  618. [ 2.420474] Netfilter messages via NETLINK v0.30.
  619. [ 2.421029] ip_set: protocol 6
  620. [ 2.421566] Initializing XFRM netlink socket
  621. [ 2.422631] NET: Registered protocol family 10
  622. [ 2.424090] NET: Registered protocol family 17
  623. [ 2.424526] NET: Registered protocol family 15
  624. [ 2.424994] bridge: automatic filtering via arp/ip/ip6tables has been deprec.
  625. [ 2.426162] Bridge firewalling registered
  626. [ 2.426776] Bluetooth: RFCOMM socket layer initialized
  627. [ 2.427271] Bluetooth: RFCOMM ver 1.11
  628. [ 2.427636] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  629. [ 2.428184] Bluetooth: HIDP socket layer initialized
  630. [ 2.428712] 8021q: 802.1Q VLAN Support v1.8
  631. [ 2.429144] [WLAN_RFKILL]: Enter rfkill_wlan_init
  632. [ 2.429981] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  633. [ 2.430495] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  634. [ 2.431121] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  635. [ 2.431769] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by g.
  636. [ 2.432535] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_w.
  637. [ 2.433387] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not foun!
  638. [ 2.434065] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  639. [ 2.434548] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  640. [ 2.435053] [BT_RFKILL]: Enter rfkill_rk_init
  641. [ 2.435996] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts.
  642. [ 2.436783] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset.
  643. [ 2.437450] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000)
  644. [ 2.438467] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  645. [ 2.439226] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_.
  646. [ 2.440617] [BT_RFKILL]: Request irq for bt wakeup host
  647. [ 2.441181] [BT_RFKILL]: ** disable irq
  648. [ 2.441708] [BT_RFKILL]: bt_default device registered.
  649. [ 2.442278] Key type dns_resolver registered
  650. [ 2.443324] Registered cp15_barrier emulation handler
  651. [ 2.443899] Registered setend emulation handler
  652. [ 2.446957] registered taskstats version 1
  653. [ 2.449402] Btrfs loaded, integrity-checker=on
  654. [ 2.449893] BTRFS: selftest: Running btrfs free space cache tests
  655. [ 2.450461] BTRFS: selftest: Running extent only tests
  656. [ 2.450944] BTRFS: selftest: Running bitmap only tests
  657. [ 2.451427] BTRFS: selftest: Running bitmap and extent tests
  658. [ 2.451962] BTRFS: selftest: Running space stealing from bitmap to extent
  659. [ 2.453467] BTRFS: selftest: Free space cache tests finished
  660. [ 2.453982] BTRFS: selftest: Running extent buffer operation tests
  661. [ 2.454514] BTRFS: selftest: Running btrfs_split_item tests
  662. [ 2.455088] BTRFS: selftest: Running find delalloc tests
  663. [ 2.667635] BTRFS: selftest: Running btrfs_get_extent tests
  664. [ 2.668289] BTRFS: selftest: Running hole first btrfs_get_extent test
  665. [ 2.668916] BTRFS: selftest: Running outstanding_extents tests
  666. [ 2.669469] BTRFS: selftest: Running qgroup tests
  667. [ 2.669889] BTRFS: selftest: Qgroup basic add
  668. [ 2.670314] BTRFS: selftest: Qgroup multiple refs test
  669. [ 2.699698] Key type encrypted registered
  670. [ 2.701360] phy phy-ff770000.syscon:usb2-phy@e450.6: Failed to get VBUS suppr
  671. [ 2.703405] rockchip-drm display-subsystem: devfreq is not set
  672. [ 2.704101] rockchip-vop ff900000.vop: missing rockchip,grf property
  673. [ 2.704815] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff)
  674. [ 2.705626] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  675. [ 2.706289] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff)
  676. [ 2.707627] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  677. [ 2.708364] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bur
  678. [ 2.709607] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11)
  679. [ 2.710969] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 243
  680. [ 2.711663] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
  681. [ 2.715135] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xfffff)
  682. [ 2.717218] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  683. [ 2.718683] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  684. [ 2.720040] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8)
  685. [ 2.720839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  686. [ 2.721526] [drm] No driver support for vblank timestamp query.
  687. [ 2.722505] rockchip-drm display-subsystem: failed to parse loader memory
  688. [ 2.723201] rockchip-drm display-subsystem: No connectors reported connecteds
  689. [ 2.724011] [drm] Cannot find any crtc or sizes - going 1024x768
  690. [ 2.729259] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  691. [ 2.735961] GPT:Primary header thinks Alt. header is not at the end of the d.
  692. [ 2.736711] GPT:4188159 != 62333951
  693. [ 2.737113] GPT:Alternate GPT header not at the end of the disk.
  694. [ 2.737715] GPT:4188159 != 62333951
  695. [ 2.737719] GPT: Use GNU Parted to correct GPT errors.
  696. [ 2.737803] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  697. [ 2.745234] Console: switching to colour frame buffer device 128x48
  698. [ 2.754626] rockchip-drm display-subsystem: fb0: frame buffer device
  699. [ 2.771087] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  700. [ 2.772019] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus n3
  701. [ 2.773049] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110
  702. [ 2.774061] xhci-hcd xhci-hcd.5.auto: irq 225, io mem 0xfe800000
  703. [ 2.774900] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  704. [ 2.775659] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  705. [ 2.776463] usb usb3: Product: xHCI Host Controller
  706. [ 2.777064] usb usb3: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  707. [ 2.778010] usb usb3: SerialNumber: xhci-hcd.5.auto
  708. [ 2.779183] hub 3-0:1.0: USB hub found
  709. [ 2.779634] hub 3-0:1.0: 1 port detected
  710. [ 2.780392] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  711. [ 2.781356] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus n4
  712. [ 2.782270] usb usb4: We don't know the algorithms for LPM for this host, di.
  713. [ 2.783270] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  714. [ 2.784029] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  715. [ 2.784831] usb usb4: Product: xHCI Host Controller
  716. [ 2.785394] usb usb4: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  717. [ 2.786340] usb usb4: SerialNumber: xhci-hcd.5.auto
  718. [ 2.793588] hub 4-0:1.0: USB hub found
  719. [ 2.807829] hub 4-0:1.0: 1 port detected
  720. [ 2.816461] xhci-hcd xhci-hcd.5.auto: remove, state 1
  721. [ 2.822365] usb usb4: USB disconnect, device number 1
  722. [ 2.849373] xhci-hcd xhci-hcd.5.auto: Host not halted after 16000 microsecon.
  723. [ 2.854567] xhci-hcd xhci-hcd.5.auto: Host controller not halted, aborting r.
  724. [ 2.859756] xhci-hcd xhci-hcd.5.auto: USB bus 4 deregistered
  725. [ 2.864748] xhci-hcd xhci-hcd.5.auto: remove, state 1
  726. [ 2.868931] usb usb3: USB disconnect, device number 1
  727. [ 2.873968] xhci-hcd xhci-hcd.5.auto: USB bus 3 deregistered
  728. [ 2.883477] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  729. [ 2.888070] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus n3
  730. [ 2.895393] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110
  731. [ 2.902645] xhci-hcd xhci-hcd.6.auto: irq 226, io mem 0xfe900000
  732. [ 2.909713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  733. [ 2.916673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber1
  734. [ 2.923645] usb usb3: Product: xHCI Host Controller
  735. [ 2.928213] usb usb3: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  736. [ 2.932129] usb usb3: SerialNumber: xhci-hcd.6.auto
  737. [ 2.936159] hub 3-0:1.0: USB hub found
  738. [ 2.939615] hub 3-0:1.0: 1 port detected
  739. [ 2.943286] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  740. [ 2.946985] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus n4
  741. [ 2.950795] usb usb4: We don't know the algorithms for LPM for this host, di.
  742. [ 2.954725] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  743. [ 2.958454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber1
  744. [ 2.962242] usb usb4: Product: xHCI Host Controller
  745. [ 2.965502] usb usb4: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  746. [ 2.968809] usb usb4: SerialNumber: xhci-hcd.6.auto
  747. [ 2.972138] hub 4-0:1.0: USB hub found
  748. [ 2.975028] hub 4-0:1.0: 1 port detected
  749. [ 2.981970] ehci-platform fe380000.usb: EHCI Host Controller
  750. [ 2.985124] ehci-platform fe380000.usb: new USB bus registered, assigned bus5
  751. [ 2.988408] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
  752. [ 3.001040] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  753. [ 3.004219] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  754. [ 3.007282] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber1
  755. [ 3.010361] usb usb5: Product: EHCI Host Controller
  756. [ 3.013222] usb usb5: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  757. [ 3.016483] usb usb5: SerialNumber: fe380000.usb
  758. [ 3.019814] hub 5-0:1.0: USB hub found
  759. [ 3.022709] hub 5-0:1.0: 1 port detected
  760. [ 3.026113] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  761. [ 3.028920] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus6
  762. [ 3.031755] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
  763. [ 3.093706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  764. [ 3.106432] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber1
  765. [ 3.119042] usb usb6: Product: Generic Platform OHCI controller
  766. [ 3.131555] usb usb6: Manufacturer: Linux 4.4.154-1134-rockchip-ayufan-g0d09d
  767. [ 3.144683] usb usb6: SerialNumber: fe3a0000.usb
  768. [ 3.159577] hub 6-0:1.0: USB hub found
  769. [ 3.164970] hub 6-0:1.0: 1 port detected
  770. [ 3.171658] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  771. [ 3.284664] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mappk
  772. [ 3.298237] asoc-simple-card es8316-sound: ASoC: no source widget found for 1
  773. [ 3.311842] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIASk
  774. [ 3.325665] asoc-simple-card es8316-sound: ASoC: no sink widget found for INP
  775. [ 3.339266] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic JacP
  776. [ 3.353952] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  777. [ 3.367836] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  778. [ 3.381679] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  779. [ 3.387508] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  780. [ 3.393259] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  781. [ 3.398958] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  782. [ 3.409477] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  783. [ 3.414323] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  784. [ 3.419062] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.sp2
  785. [ 3.424021] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -2
  786. [ 3.429070] asoc-simple-card: probe of spdif-sound failed with error -22
  787. [ 3.435667] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  788. [ 3.443125] rk808-rtc rk808-rtc: setting system clock to 2019-03-04 09:25:50)
  789. [ 3.450548] of_cfs_init
  790. [ 3.457216] of_cfs_init: OK
  791. [ 3.488076] vcc3v3_pcie: disabling
  792. [ 3.492138] rk-keypad rockchip-key: no io-channels defined
  793. [ 3.496046] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  794. [ 3.500675] ALSA device list:
  795. [ 3.503554] #0: rockchip,es8316-codec
  796. [ 3.503786] dwmmc_rockchip fe310000.dwmmc: deferring for a max of 2000ms whi.
  797. [ 3.510276] ttyS2 - failed to request DMA, use interrupt mode
  798. [ 3.514011] Freeing unused kernel memory: 1216K
  799. Loading, please wait...
  800. starting version 237
  801. [ 3.737011] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin f2
  802. [ 3.772636] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already pt
  803. [ 3.778139] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to add EL6
  804. [ 3.781817] mali ff9a0000.gpu: Failed to get leakage
  805. [ 3.781868] mali ff9a0000.gpu: Failed to get pvtm
  806. [ 3.782868] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  807. [ 3.783206] mali ff9a0000.gpu: Protected mode not available
  808. [ 3.790002] mali ff9a0000.gpu: Using configured power model mali-simple-powel
  809. [ 3.790185] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devf.
  810. [ 3.794280] mali ff9a0000.gpu: Probed as mali0
  811. [ 3.826759] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mappk
  812. [ 3.831768] hdmi-audio-codec hdmi-audio-codec.4.auto: ASoC: Failed to createe
  813. [ 3.839554] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  814. [ 3.844414] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  815. [ 3.849191] rockchip-pcie f8000000.pcie: invalid power supply
  816. [ 3.909674] PCI host bridge /pcie@f8000000 ranges:
  817. [ 3.919712] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  818. Begin: Loading essential drivers ... done.
  819. Begin: Running /scripts/init-premount ... done.
  820. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  821. [ 3.935938] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  822. Begin: Running /scripts/local-premount ... [ 3.942410] rockchip-pcie f8000000
  823. done.
  824. [ 3.948595] pci_bus 0000:00: root bus resource [bus 00-1f]
  825. [ 3.954653] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  826. [ 3.959902] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
  827. [ 3.966383] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reg
  828. Warning: fsck not present, so skipping root file system
  829. [ 3.981020] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
  830. [ 3.986334] pci 0000:01:00.0: BAR 0: assigned [mem 0xfa000000-0xfa003fff 64b]
  831. [ 3.991619] pci 0000:00:00.0: PCI bridge to [bus 01]
  832. [ 3.996667] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  833. [ 4.002092] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  834. [ 4.006294] EXT4-fs (mmcblk0p7): recovery complete
  835. [ 4.006314] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode)
  836. done.
  837. [ 4.018964] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  838. [ 4.025034] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  839. [ 4.030493] nvme 0000:01:00.0: enabling device (0000 -> 0002)
  840. [ 4.034956] dwmmc_rockchip fe310000.dwmmc: detected pcie initialized, contin.
  841. [ 4.035171] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mod.
  842. [ 4.035228] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  843. [ 4.035249] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  844. [ 4.035332] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bio
  845. [ 4.035364] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was.
  846. [ 4.035478] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
  847. [ 4.035485] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
  848. [ 4.035969] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  849. Begin: Running /scripts/local-bottom ... done.
  850. Begin: Running /scripts/init-bottom ... [ 4.049201] mmc_host mmc2: Bus speed)
  851. [ 4.069073] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!