API tools faq
paste
xlazom00

Untitled

xlazom00
Oct 26th, 2020
215
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.23 KB | None | 0 0
raw download clone embed print report
  1. System Information
  2. ------------------
  3.  
  4. Raspberry Pi 4 Model B Rev 1.4
  5. PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
  6. NAME="Raspbian GNU/Linux"
  7. VERSION_ID="10"
  8. VERSION="10 (buster)"
  9.  
  10. Raspberry Pi reference 2020-08-20
  11. Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 9a3a10bf1019ebb2d59053564dc6b90068bad27d, stage2
  12.  
  13. Linux raspberrypi 5.4.72-v7l+ #1356 SMP Thu Oct 22 13:57:51 BST 2020 armv7l GNU/Linux
  14. Revision : d03114
  15. Serial : 10000000f76342fa
  16. Model : Raspberry Pi 4 Model B Rev 1.4
  17. Throttled flag : throttled=0x0
  18. Camera : supported=0 detected=0
  19.  
  20. Videocore information
  21. ---------------------
  22.  
  23. Oct 22 2020 13:59:27
  24. Copyright (c) 2012 Broadcom
  25. version 74e754ff8947c58d2773253f77f6f68a303188f8 (clean) (release) (start)
  26.  
  27. alloc failures: 0
  28. compactions: 0
  29. legacy block fails: 0
  30.  
  31. Filesystem information
  32. ----------------------
  33. Filesystem 1K-blocks Used Available Use% Mounted on
  34. /dev/root 61116684 1779620 56822800 4% /
  35. devtmpfs 3900372 0 3900372 0% /dev
  36. tmpfs 4032468 0 4032468 0% /dev/shm
  37. tmpfs 4032468 8664 4023804 1% /run
  38. tmpfs 5120 4 5116 1% /run/lock
  39. tmpfs 4032468 0 4032468 0% /sys/fs/cgroup
  40. /dev/mmcblk0p1 258095 55171 202925 22% /boot
  41. tmpfs 806492 16972 789520 3% /run/user/1000
  42.  
  43. Filename Type Size Used Priority
  44. /var/swap file 102396 0 -2
  45.  
  46. Package version information
  47. ---------------------------
  48. raspberrypi-ui-mods:
  49. Installed: (none)
  50. raspberrypi-sys-mods:
  51. Installed: 20200812
  52. openbox:
  53. Installed: (none)
  54. lxpanel:
  55. Installed: (none)
  56. pcmanfm:
  57. Installed: (none)
  58. rpd-plym-splash:
  59. Installed: (none)
  60.  
  61. Networking Information
  62. ----------------------
  63.  
  64. eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  65. inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
  66. inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
  67. ether m.m.m.m txqueuelen 1000 (Ethernet)
  68. RX packets 208 bytes 19871 (19.4 KiB)
  69. RX errors 0 dropped 0 overruns 0 frame 0
  70. TX packets 149 bytes 20979 (20.4 KiB)
  71. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  72.  
  73. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  74. inet x.x.x.x netmask x.x.x.x
  75. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  76. loop txqueuelen 1000 (Local Loopback)
  77. RX packets 0 bytes 0 (0.0 B)
  78. RX errors 0 dropped 0 overruns 0 frame 0
  79. TX packets 0 bytes 0 (0.0 B)
  80. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  81.  
  82.  
  83. USB Information
  84. ---------------
  85.  
  86. /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
  87. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
  88. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
  89. |__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
  90. |__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
  91. |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
  92.  
  93. config.txt
  94. ----------
  95.  
  96. arm_freq=1500
  97. audio_pwm_mode=514
  98. config_hdmi_boost=5
  99. core_freq=500
  100. core_freq_min=200
  101. disable_commandline_tags=2
  102. disable_l2cache=1
  103. disable_overscan=1
  104. display_hdmi_rotate=-1
  105. display_lcd_rotate=-1
  106. enable_gic=1
  107. force_eeprom_read=1
  108. force_pwm_open=1
  109. framebuffer_ignore_alpha=1
  110. framebuffer_swap=1
  111. gpu_freq=500
  112. gpu_freq_min=250
  113. init_uart_clock=0x2dc6c00
  114. lcd_framerate=60
  115. mask_gpu_interrupt0=1024
  116. mask_gpu_interrupt1=0x10000
  117. max_framebuffers=2
  118. over_voltage_avs=-30000
  119. pause_burst_frames=1
  120. program_serial_random=1
  121. total_mem=8192
  122. hdmi_force_cec_address:0=65535
  123. hdmi_force_cec_address:1=65535
  124. hdmi_pixel_freq_limit:0=0x11e1a300
  125. hdmi_pixel_freq_limit:1=0x11e1a300
  126. device_tree=-
  127. overlay_prefix=overlays/
  128. hdmi_cvt:0=
  129. hdmi_cvt:1=
  130. hdmi_edid_filename:0=
  131. hdmi_edid_filename:1=
  132. hdmi_timings:0=
  133. hdmi_timings:1=
  134.  
  135. cmdline.txt
  136. -----------
  137. coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:B6:00:1D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=342f7cb8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  138.  
  139. raspi-gpio settings
  140. -------------------
  141.  
  142. BANK0 (GPIO 0 to 27):
  143. GPIO 0: level=1 fsel=0 func=INPUT pull=UP
  144. GPIO 1: level=1 fsel=0 func=INPUT pull=UP
  145. GPIO 2: level=1 fsel=0 func=INPUT pull=UP
  146. GPIO 3: level=1 fsel=0 func=INPUT pull=UP
  147. GPIO 4: level=1 fsel=0 func=INPUT pull=UP
  148. GPIO 5: level=1 fsel=0 func=INPUT pull=UP
  149. GPIO 6: level=1 fsel=0 func=INPUT pull=UP
  150. GPIO 7: level=1 fsel=0 func=INPUT pull=UP
  151. GPIO 8: level=1 fsel=0 func=INPUT pull=UP
  152. GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
  153. GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
  154. GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
  155. GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
  156. GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
  157. GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
  158. GPIO 15: level=1 fsel=0 func=INPUT pull=UP
  159. GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
  160. GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
  161. GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
  162. GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
  163. GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
  164. GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
  165. GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
  166. GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
  167. GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
  168. GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
  169. GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
  170. GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
  171. BANK1 (GPIO 28 to 45):
  172. GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
  173. GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
  174. GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
  175. GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
  176. GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
  177. GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
  178. GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK pull=NONE
  179. GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
  180. GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
  181. GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
  182. GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
  183. GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
  184. GPIO 40: level=0 fsel=4 alt=0 func=PWM1_0 pull=NONE
  185. GPIO 41: level=0 fsel=4 alt=0 func=PWM1_1 pull=NONE
  186. GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
  187. GPIO 43: level=1 fsel=0 func=INPUT pull=UP
  188. GPIO 44: level=1 fsel=0 func=INPUT pull=UP
  189. GPIO 45: level=1 fsel=0 func=INPUT pull=UP
  190. BANK2 (GPIO 46 to 53):
  191. GPIO 46: level=0 fsel=0 func=INPUT pull=DOWN
  192. GPIO 47: level=0 fsel=0 func=INPUT pull=DOWN
  193. GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
  194. GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
  195. GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
  196. GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
  197. GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
  198. GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN
  199.  
  200. vcdbg log messages
  201. ------------------
  202.  
  203. 005240.882: arasan: arasan_emmc_open
  204. 005665.763: brfs: File read: /mfs/sd/config.txt
  205. 005666.559: brfs: File read: 1782 bytes
  206. 005756.595: brfs: File read: /mfs/sd/config.txt
  207. 005772.052: brfs: File read: 1782 bytes
  208. 006232.870: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
  209. 006235.328: *** Restart logging
  210. 006276.170: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  211. 006276.186: HDMI0: hdmi_pixel_encoding: 300000000
  212. 006276.198: HDMI1: hdmi_pixel_encoding: 300000000
  213. 006281.148: dtb_file 'bcm2711-rpi-4-b.dtb'
  214. 006285.879: brfs: File read: /mfs/sd/bcm2711-rpi-4-b.dtb
  215. 006285.894: Loading 'bcm2711-rpi-4-b.dtb' to 0x100 size 0xb99c
  216. 006298.012: brfs: File read: 47516 bytes
  217. 006308.302: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
  218. 006362.899: brfs: File read: 1463 bytes
  219. 006364.962: brfs: File read: /mfs/sd/config.txt
  220. 006365.468: dtparam: audio=on
  221. 006375.743: brfs: File read: 1782 bytes
  222. 006387.508: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo
  223. 006404.176: Loaded overlay 'vc4-fkms-v3d'
  224. 006437.738: brfs: File read: 1446 bytes
  225. 006438.501: brfs: File read: /mfs/sd/overlays/vc4-fkms-v3d.dtbo
  226. 006455.144: Loaded overlay 'vc4-fkms-v3d'
  227. 006534.192: brfs: File read: 1446 bytes
  228. 006536.377: brfs: File read: /mfs/sd/cmdline.txt
  229. 006536.446: Read command line from file 'cmdline.txt':
  230. 006536.472: 'console=serial0,115200 console=tty1 root=PARTUUID=342f7cb8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait'
  231. 007810.317: brfs: File read: 121 bytes
  232. 008993.022: brfs: File read: /mfs/sd/kernel7l.img
  233. 008993.065: Loading 'kernel7l.img' to 0x8000 size 0x5d92d8
  234. 008993.117: Device tree loaded to 0x2eff4100 (size 0xbef6)
  235. 009007.124: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  236. 014076.300: vchiq_core: vchiq_init_state: slot_zero = 0xded80000, is_master = 1
  237. 014080.161: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  238. 014087.730: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010
  239. 018232.358: TV service:host side not connected, dropping notification 0x00000008, 0x00000004, 0x00000000
  240. 043056.731: TV service:host side not connected, dropping notification 0x00000008, 0x00000004, 0x00000000
  241.  
  242. dmesg log
  243. ---------
  244.  
  245. [ 0.000000] Booting Linux on physical CPU 0x0
  246. [ 0.000000] Linux version 5.4.72-v7l+ (dom@buildbot) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #1356 SMP Thu Oct 22 13:57:51 BST 2020
  247. [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  248. [ 0.000000] CPU: div instructions available: patching division code
  249. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  250. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
  251. [ 0.000000] Memory policy: Data cache writealloc
  252. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
  253. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  254. [ 0.000000] On node 0 totalpages: 2061312
  255. [ 0.000000] DMA zone: 2304 pages used for memmap
  256. [ 0.000000] DMA zone: 0 pages reserved
  257. [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
  258. [ 0.000000] HighMem zone: 1864704 pages, LIFO batch:63
  259. [ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920
  260. [ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096
  261. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  262. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2059008
  263. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=342f7cb8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  264. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  265. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  266. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  267. [ 0.000000] software IO TLB: mapped [mem 0x14c00000-0x18c00000] (64MB)
  268. [ 0.000000] Memory: 7800748K/8245248K available (10240K kernel code, 745K rwdata, 2836K rodata, 2048K init, 856K bss, 182356K reserved, 262144K cma-reserved, 7458816K highmem)
  269. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  270. [ 0.000000] ftrace: allocating 31086 entries in 61 pages
  271. [ 0.000000] rcu: Hierarchical RCU implementation.
  272. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  273. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  274. [ 0.000000] GIC: Using split EOI/Deactivate mode
  275. [ 0.000000] random: get_random_bytes called from start_kernel+0x338/0x520 with crng_init=0
  276. [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  277. [ 0.000033] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  278. [ 0.000119] bcm2835: system timer (irq = 17)
  279. [ 0.000769] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  280. [ 0.000790] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  281. [ 0.000810] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  282. [ 0.000826] Switching to timer-based delay loop, resolution 18ns
  283. [ 0.001073] Console: colour dummy device 80x30
  284. [ 0.001582] printk: console [tty1] enabled
  285. [ 0.001646] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  286. [ 0.001689] pid_max: default: 32768 minimum: 301
  287. [ 0.001850] LSM: Security Framework initializing
  288. [ 0.002058] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  289. [ 0.002099] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  290. [ 0.003426] Disabling memory control group subsystem
  291. [ 0.003571] CPU: Testing write buffer coherency: ok
  292. [ 0.004124] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  293. [ 0.005070] Setting up static identity map for 0x200000 - 0x20003c
  294. [ 0.005302] rcu: Hierarchical SRCU implementation.
  295. [ 0.006010] smp: Bringing up secondary CPUs ...
  296. [ 0.007280] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  297. [ 0.008650] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  298. [ 0.009939] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  299. [ 0.010094] smp: Brought up 1 node, 4 CPUs
  300. [ 0.010175] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  301. [ 0.010202] CPU: All CPU(s) started in HYP mode.
  302. [ 0.010227] CPU: Virtualization extensions available.
  303. [ 0.011182] devtmpfs: initialized
  304. [ 0.024961] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  305. [ 0.025264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  306. [ 0.025318] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  307. [ 0.032403] pinctrl core: initialized pinctrl subsystem
  308. [ 0.033485] NET: Registered protocol family 16
  309. [ 0.037532] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  310. [ 0.038153] audit: initializing netlink subsys (disabled)
  311. [ 0.038434] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
  312. [ 0.039557] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  313. [ 0.039593] hw-breakpoint: maximum watchpoint size is 8 bytes.
  314. [ 0.039965] Serial: AMBA PL011 UART driver
  315. [ 0.043729] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  316. [ 0.060855] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-10-22 13:59, variant start
  317. [ 0.070868] raspberrypi-firmware soc:firmware: Firmware hash is 74e754ff8947c58d2773253f77f6f68a303188f8
  318. [ 0.125864] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  319. [ 0.131010] vgaarb: loaded
  320. [ 0.131501] SCSI subsystem initialized
  321. [ 0.131752] usbcore: registered new interface driver usbfs
  322. [ 0.131826] usbcore: registered new interface driver hub
  323. [ 0.131966] usbcore: registered new device driver usb
  324. [ 0.132320] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
  325. [ 0.134216] clocksource: Switched to clocksource arch_sys_counter
  326. [ 0.843093] VFS: Disk quotas dquot_6.6.0
  327. [ 0.843232] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  328. [ 0.843415] FS-Cache: Loaded
  329. [ 0.843622] CacheFiles: Loaded
  330. [ 0.844712] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes, mapped to 0x(ptrval)
  331. [ 0.844757] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
  332. [ 0.856244] Console: switching to colour frame buffer device 240x67
  333. [ 0.866489] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered!
  334. [ 0.877023] thermal_sys: Registered thermal governor 'step_wise'
  335. [ 0.877378] NET: Registered protocol family 2
  336. [ 0.878283] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  337. [ 0.878401] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  338. [ 0.878539] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  339. [ 0.878683] TCP: Hash tables configured (established 8192 bind 8192)
  340. [ 0.878910] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  341. [ 0.879016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  342. [ 0.879350] NET: Registered protocol family 1
  343. [ 0.880178] RPC: Registered named UNIX socket transport module.
  344. [ 0.880256] RPC: Registered udp transport module.
  345. [ 0.880320] RPC: Registered tcp transport module.
  346. [ 0.880382] RPC: Registered tcp NFSv4.1 backchannel transport module.
  347. [ 0.880470] PCI: CLS 0 bytes, default 64
  348. [ 0.882487] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  349. [ 0.884870] Initialise system trusted keyrings
  350. [ 0.885217] workingset: timestamp_bits=14 max_order=21 bucket_order=7
  351. [ 0.896374] FS-Cache: Netfs 'nfs' registered for caching
  352. [ 0.897230] NFS: Registering the id_resolver key type
  353. [ 0.897321] Key type id_resolver registered
  354. [ 0.897382] Key type id_legacy registered
  355. [ 0.897451] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  356. [ 0.898704] Key type asymmetric registered
  357. [ 0.898769] Asymmetric key parser 'x509' registered
  358. [ 0.899015] bounce: pool size: 64 pages
  359. [ 0.899100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  360. [ 0.899422] io scheduler mq-deadline registered
  361. [ 0.899488] io scheduler kyber registered
  362. [ 0.903699] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  363. [ 0.903804] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  364. [ 0.903964] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
  365. [ 0.907170] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
  366. [ 0.966335] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
  367. [ 0.969665] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  368. [ 0.972641] pci_bus 0000:00: root bus resource [bus 00-ff]
  369. [ 0.975649] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  370. [ 0.978667] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  371. [ 0.981930] pci 0000:00:00.0: PME# supported from D0 D3hot
  372. [ 0.988240] PCI: bus0: Fast back to back transfers disabled
  373. [ 0.991467] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  374. [ 0.994558] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  375. [ 0.997922] pci 0000:01:00.0: PME# supported from D0 D3hot
  376. [ 1.004098] PCI: bus1: Fast back to back transfers disabled
  377. [ 1.007086] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  378. [ 1.009999] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  379. [ 1.012953] pci 0000:00:00.0: PCI bridge to [bus 01]
  380. [ 1.015870] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  381. [ 1.019108] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  382. [ 1.022302] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
  383. [ 1.025720] pcieport 0000:00:00.0: AER: enabled with IRQ 55
  384. [ 1.028936] pci 0000:01:00.0: enabling device (0140 -> 0142)
  385. [ 1.082496] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x7dc took 52323 usecs
  386. [ 1.092461] iproc-rng200 fe104000.rng: hwrng registered
  387. [ 1.095688] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  388. [ 1.099286] vc-sm: Videocore shared memory driver
  389. [ 1.102813] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  390. [ 1.118326] brd: module loaded
  391. [ 1.134045] loop: module loaded
  392. [ 1.138521] Loading iSCSI transport class v2.0-870.
  393. [ 1.143435] libphy: Fixed MDIO Bus: probed
  394. [ 1.146976] bcmgenet fd580000.ethernet: failed to get enet clock
  395. [ 1.149828] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  396. [ 1.152662] bcmgenet fd580000.ethernet: failed to get enet-wol clock
  397. [ 1.155507] bcmgenet fd580000.ethernet: failed to get enet-eee clock
  398. [ 1.158279] bcmgenet: Skipping UMAC reset
  399. [ 1.174296] libphy: bcmgenet MII bus: probed
  400. [ 1.254329] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  401. [ 1.258154] usbcore: registered new interface driver r8152
  402. [ 1.260870] usbcore: registered new interface driver lan78xx
  403. [ 1.263590] usbcore: registered new interface driver smsc95xx
  404. [ 1.266752] xhci_hcd 0000:01:00.0: xHCI Host Controller
  405. [ 1.269425] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  406. [ 1.274645] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
  407. [ 1.278689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
  408. [ 1.281485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  409. [ 1.284254] usb usb1: Product: xHCI Host Controller
  410. [ 1.286975] usb usb1: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd
  411. [ 1.289667] usb usb1: SerialNumber: 0000:01:00.0
  412. [ 1.292945] hub 1-0:1.0: USB hub found
  413. [ 1.295691] hub 1-0:1.0: 1 port detected
  414. [ 1.298918] xhci_hcd 0000:01:00.0: xHCI Host Controller
  415. [ 1.301584] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  416. [ 1.304299] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  417. [ 1.307455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
  418. [ 1.310127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  419. [ 1.312802] usb usb2: Product: xHCI Host Controller
  420. [ 1.315509] usb usb2: Manufacturer: Linux 5.4.72-v7l+ xhci-hcd
  421. [ 1.318167] usb usb2: SerialNumber: 0000:01:00.0
  422. [ 1.321426] hub 2-0:1.0: USB hub found
  423. [ 1.324162] hub 2-0:1.0: 4 ports detected
  424. [ 1.328416] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  425. [ 1.331354] dwc_otg: FIQ enabled
  426. [ 1.331367] dwc_otg: NAK holdoff enabled
  427. [ 1.331379] dwc_otg: FIQ split-transaction FSM enabled
  428. [ 1.331395] Module dwc_common_port init
  429. [ 1.331879] usbcore: registered new interface driver uas
  430. [ 1.334654] usbcore: registered new interface driver usb-storage
  431. [ 1.337507] mousedev: PS/2 mouse device common for all mice
  432. [ 1.342072] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  433. [ 1.348336] sdhci: Secure Digital Host Controller Interface driver
  434. [ 1.351019] sdhci: Copyright(c) Pierre Ossman
  435. [ 1.354325] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  436. [ 1.357522] sdhci-pltfm: SDHCI platform and OF driver helper
  437. [ 1.364020] ledtrig-cpu: registered to indicate activity on CPUs
  438. [ 1.367022] hidraw: raw HID events driver (C) Jiri Kosina
  439. [ 1.369854] usbcore: registered new interface driver usbhid
  440. [ 1.372486] usbhid: USB HID core driver
  441. [ 1.376241] vchiq: vchiq_init_state: slot_zero = (ptrval)
  442. [ 1.380984] [vc_sm_connected_init]: start
  443. [ 1.391423] [vc_sm_connected_init]: end - returning 0
  444. [ 1.396379] Initializing XFRM netlink socket
  445. [ 1.399017] NET: Registered protocol family 17
  446. [ 1.401725] Key type dns_resolver registered
  447. [ 1.404943] Registering SWP/SWPB emulation handler
  448. [ 1.407863] registered taskstats version 1
  449. [ 1.410405] Loading compiled-in X.509 certificates
  450. [ 1.413561] Key type ._fscrypt registered
  451. [ 1.416161] Key type .fscrypt registered
  452. [ 1.429591] uart-pl011 fe201000.serial: cts_event_workaround enabled
  453. [ 1.432243] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
  454. [ 1.441924] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  455. [ 1.445550] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  456. [ 1.448116] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  457. [ 1.500634] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  458. [ 1.504891] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  459. [ 1.509082] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  460. [ 1.514508] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  461. [ 1.517988] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  462. [ 1.520128] of_cfs_init
  463. [ 1.522222] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  464. [ 1.523365] of_cfs_init: OK
  465. [ 1.529314] Waiting for root device PARTUUID=342f7cb8-02...
  466. [ 1.572107] random: fast init done
  467. [ 1.611284] mmc1: new high speed SDIO card at address 0001
  468. [ 1.639866] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
  469. [ 1.643439] mmcblk0: mmc0:aaaa SR64G 59.5 GiB
  470. [ 1.648340] mmcblk0: p1 p2
  471. [ 1.664267] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  472. [ 1.687189] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  473. [ 1.689925] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  474. [ 1.697749] devtmpfs: mounted
  475. [ 1.709369] Freeing unused kernel memory: 2048K
  476. [ 1.714536] Run /sbin/init as init process
  477. [ 1.846904] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  478. [ 1.849661] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  479. [ 1.852351] usb 1-1: Product: USB2.0 Hub
  480. [ 1.857582] hub 1-1:1.0: USB hub found
  481. [ 1.860694] hub 1-1:1.0: 4 ports detected
  482. [ 2.147942] systemd[1]: System time before build time, advancing clock.
  483. [ 2.184279] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd
  484. [ 2.254144] NET: Registered protocol family 10
  485. [ 2.258288] Segment Routing with IPv6
  486. [ 2.290892] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  487. [ 2.304365] systemd[1]: Detected architecture arm.
  488. [ 2.374934] systemd[1]: Set hostname to <raspberrypi>.
  489. [ 2.513641] usb 1-1.3: New USB device found, idVendor=1532, idProduct=0001, bcdDevice=23.00
  490. [ 2.517052] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  491. [ 2.520218] usb 1-1.3: Product: Razer 1600dpi Mouse
  492. [ 2.523411] usb 1-1.3: Manufacturer: Razer
  493. [ 2.549576] input: Razer Razer 1600dpi Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:1532:0001.0001/input/input0
  494. [ 2.554261] hid-generic 0003:1532:0001.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer 1600dpi Mouse] on usb-0000:01:00.0-1.3/input0
  495. [ 2.654296] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
  496. [ 2.803779] usb 1-1.4: New USB device found, idVendor=258a, idProduct=0001, bcdDevice= 1.00
  497. [ 2.807091] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  498. [ 2.810234] usb 1-1.4: Product: USB KEYBOARD
  499. [ 2.813347] usb 1-1.4: Manufacturer: SINO WEALTH
  500. [ 2.828356] input: SINO WEALTH USB KEYBOARD as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:258A:0001.0002/input/input1
  501. [ 2.895110] hid-generic 0003:258A:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:01:00.0-1.4/input0
  502. [ 2.909849] input: SINO WEALTH USB KEYBOARD System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:258A:0001.0003/input/input2
  503. [ 2.974663] input: SINO WEALTH USB KEYBOARD Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:258A:0001.0003/input/input3
  504. [ 2.978930] hid-generic 0003:258A:0001.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:01:00.0-1.4/input1
  505. [ 3.054448] random: systemd: uninitialized urandom read (16 bytes read)
  506. [ 3.068160] random: systemd: uninitialized urandom read (16 bytes read)
  507. [ 3.071930] systemd[1]: Reached target Swap.
  508. [ 3.081125] random: systemd: uninitialized urandom read (16 bytes read)
  509. [ 3.085235] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  510. [ 3.097201] systemd[1]: Created slice system-getty.slice.
  511. [ 3.107121] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  512. [ 3.116442] systemd[1]: Listening on udev Kernel Socket.
  513. [ 3.126368] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  514. [ 3.136068] systemd[1]: Listening on Journal Socket (/dev/log).
  515. [ 3.941272] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  516. [ 4.045243] systemd-journald[119]: Received request to flush runtime journal from PID 1
  517. [ 4.622006] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
  518. [ 4.622543] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
  519. [ 4.623033] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
  520. [ 4.623885] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
  521. [ 4.661502] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  522. [ 4.663660] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  523. [ 4.663684] [vc_sm_connected_init]: start
  524. [ 4.677362] [vc_sm_connected_init]: installed successfully
  525. [ 4.685473] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  526. [ 4.689553] mc: Linux media interface: v0.10
  527. [ 4.748964] videodev: Linux video capture interface: v2.00
  528. [ 4.813456] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  529. [ 4.818209] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  530. [ 4.829476] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  531. [ 4.833463] bcm2835_audio bcm2835_audio: card created with 4 channels
  532. [ 4.839940] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  533. [ 4.851250] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  534. [ 4.875994] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  535. [ 4.876041] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  536. [ 4.886825] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  537. [ 4.886894] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  538. [ 4.889003] bcm2835_audio bcm2835_audio: card created with 4 channels
  539. [ 4.911824] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  540. [ 4.911870] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  541. [ 4.912464] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  542. [ 4.916817] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  543. [ 4.917280] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  544. [ 4.918696] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  545. [ 4.918723] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  546. [ 4.918748] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  547. [ 4.918770] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  548. [ 4.918790] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  549. [ 4.919062] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  550. [ 5.189878] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
  551. [ 5.276045] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  552. [ 5.310619] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  553. [ 5.310641] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff)
  554. [ 5.310657] fb0: switching to vc4drmfb from simple
  555. [ 5.312907] Console: switching to colour dummy device 80x30
  556. [ 5.313198] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  557. [ 5.313211] [drm] No driver support for vblank timestamp query.
  558. [ 5.313224] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  559. [ 5.315061] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
  560. [ 5.397542] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  561. [ 5.490463] brcmfmac: F1 signature read @0x18000000=0x15264345
  562. [ 5.504919] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  563. [ 5.506805] usbcore: registered new interface driver brcmfmac
  564. [ 5.528120] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
  565. [ 5.553229] Console: switching to colour frame buffer device 240x67
  566. [ 5.580561] vc4-drm gpu: fb0: vc4drmfb frame buffer device
  567. [ 5.776508] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  568. [ 5.793435] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
  569. [ 7.140304] random: crng init done
  570. [ 7.140321] random: 7 urandom warning(s) missed due to ratelimiting
  571. [ 7.353291] uart-pl011 fe201000.serial: no DMA platform data
  572. [ 7.356189] 8021q: 802.1Q VLAN Support v1.8
  573. [ 7.654469] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:307200k SSFS
  574. [ 7.970286] bcmgenet: Skipping UMAC reset
  575. [ 7.972848] bcmgenet fd580000.ethernet: configuring instance for external RGMII
  576. [ 7.973215] bcmgenet fd580000.ethernet eth0: Link is Down
  577. [ 13.194499] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  578. [ 13.194548] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  579. [ 14.033072] Bluetooth: Core ver 2.22
  580. [ 14.033137] NET: Registered protocol family 31
  581. [ 14.033148] Bluetooth: HCI device and connection manager initialized
  582. [ 14.033170] Bluetooth: HCI socket layer initialized
  583. [ 14.033185] Bluetooth: L2CAP socket layer initialized
  584. [ 14.033210] Bluetooth: SCO socket layer initialized
  585. [ 14.041723] Bluetooth: HCI UART driver ver 2.3
  586. [ 14.041738] Bluetooth: HCI UART protocol H4 registered
  587. [ 14.041800] Bluetooth: HCI UART protocol Three-wire (H5) registered
  588. [ 14.042061] Bluetooth: HCI UART protocol Broadcom registered
  589. [ 14.225294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  590. [ 14.225303] Bluetooth: BNEP filters: protocol multicast
  591. [ 14.225316] Bluetooth: BNEP socket layer initialized
  592.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!