Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.1.10-TripNDroid-nvtegra-3.1.10 (noeri@noeri-VirtualBox) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #24 SMP PREEMPT Sat Jun 2 19:18:45 CEST 2012
- [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: endeavoru
- [ 0.000000] Ignoring unrecognised tag 0x41000801
- [ 0.000000] Ignoring unrecognised tag 0x41000801
- [ 0.000000] parse_tag_als_calibration: als_kadc = 0x6da512b2
- [ 0.000000] parse_tag_ps_calibration: ps_kparam1 = 0x50530306, ps_kparam2 = 0xffff0a14
- [ 0.000000] Ignoring unrecognised tag 0x4e540000
- [ 0.000000] Ignoring unrecognised tag 0x54410100
- [ 0.000000] Ignoring unrecognised tag 0x54410110
- [ 0.000000] Ignoring unrecognised tag 0x4d534d70
- [ 0.000000] Ignoring unrecognised tag 0x41000801
- [ 0.000000] Ignoring unrecognised tag 0x41000801
- [ 0.000000] kmemleak: Kernel memory leak detector disabled
- [ 0.000000] Found tegra_fbmem: 00384b40@bc0ab000
- [ 0.000000] Tegra reserved memory:
- [ 0.000000] LP0: bc0a8000 - bc0a9fff
- [ 0.000000] Bootloader framebuffer: bc0ab000 - bc42ffff
- [ 0.000000] Framebuffer: bec00000 - beffffff
- [ 0.000000] 2nd Framebuffer: bf000000 - bf7fffff
- [ 0.000000] Carveout: 00000000 - 00000000
- [ 0.000000] Vpr: 00000000 - 00000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] fuse_speedo_calib: ATE prog ver 3.4
- [ 0.000000] Tegra3: CPU Speedo ID 4, Soc Speedo ID 1
- [ 0.000000] Tegra Revision: A03 SKU: 0x81 CPU Process: 1 Core Process: 0
- [ 0.000000] tegra: PLLP fixed rate: 408000000
- [ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
- [ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
- [ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
- [ 0.000000] Lowering vde maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering mpe maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering 2d maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering epp maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering 3d maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering 3d2 maximum rate from 600000000 to 416000000
- [ 0.000000] Lowering se maximum rate from 625000000 to 416000000
- [ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
- [ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
- [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
- [ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
- [ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
- [ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
- [ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
- [ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1500000000
- [ 0.000000] tegra dvfs: VDD_CPU nominal 1200mV, scaling enabled
- [ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
- [ 0.000000] L310 cache controller enabled
- [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1337000 s6272 r8192 d14208 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254482
- [ 0.000000] Kernel command line: tegraid=30.1.3.0.0 mem=1016M@2048M vmalloc=668M video=tegrafb zygote_oneshot=off kmemleak=off androidboot.lb=1 androidboot.carrier=HTC-Dutch led=1 androidboot.keycaps=qwerty console=none debug_uartport=lsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbc0a8000 nvdumper_reserved=0xbf7ff000 tegra_fbmem=3689280@0xbc0ab000 panel_id=0x294000f tegraboot=sdmmc gpt gpt_sector=61063167 androidboot.mode=normal batt_V=1048575 batt_I=1048575 batt_T=1048575 modem_id=0 androidboot.baseband=0.120201.21.10 androidboot.emmc=true androidboot.cid=HTC__E11 androidboot.mid=PJ4610000 androidboot.serialno=HT23PW122123 androidboot.mb_serialno=419G223F25861 androidboot.bootloader=0.94.0000 last_off_event=pmu_poweroff start_on_event=none hw_rst_reason=0x0 sw_rst_reason=0x77665500 project_phase=UNKNOWN radioflag=0x0
- [ 0.000000] board_bootloader_setup: 0.94.0000
- [ 0.000000] board_bootloader_setup: SHIP BUILD
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 1003MB = 1003MB total
- [ 0.000000] Memory: 1003168k/1003168k available, 37216k reserved, 789988K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xce800000 - 0xf8000000 ( 664 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xce400000 ( 228 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0809dcc (8200 kB)
- [ 0.000000] .init : 0xc080a000 - 0xc0848880 ( 251 kB)
- [ 0.000000] .data : 0xc084a000 - 0xc0908540 ( 762 kB)
- [ 0.000000] .bss : 0xc0908564 - 0xc0a40698 (1249 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:800
- [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- [ 0.000416] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
- [ 0.040073] pid_max: default: 32768 minimum: 301
- [ 0.040548] Mount-cache hash table entries: 512
- [ 0.041613] Initializing cgroup subsys debug
- [ 0.041625] Initializing cgroup subsys cpuacct
- [ 0.041682] Initializing cgroup subsys freezer
- [ 0.041750] CPU: Testing write buffer coherency: ok
- [ 0.172781] CPU1: Booted secondary processor
- [ 0.242734] CPU2: Booted secondary processor
- [ 0.312744] CPU3: Booted secondary processor
- [ 0.332042] Brought up 4 CPUs
- [ 0.332055] SMP: Total of 4 processors activated (3984.58 BogoMIPS).
- [ 0.339338] print_constraints: dummy:
- [ 0.339738] NET: Registered protocol family 16
- [ 0.341168] host1x bus init
- [ 0.341383] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.452534] [BOOT_LOG] Entering <machine>.init_machine
- [ 0.452545] [hTC info] project phase: <Latest HW phase> (id=128)
- [ 0.453693] The pingroup LCD_PWR1 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453748] The pingroup LCD_DC1 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453803] The pingroup LCD_D8 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453837] The pingroup LCD_D14 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453850] The pingroup LCD_D15 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453863] The pingroup GMI_AD0 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453876] The pingroup GMI_AD1 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453889] The pingroup GMI_AD2 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453902] The pingroup GMI_AD3 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453914] The pingroup GMI_AD4 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453927] The pingroup GMI_AD5 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453940] The pingroup GMI_AD6 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453952] The pingroup GMI_AD7 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453969] The pingroup GMI_AD9 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453987] The pingroup GMI_AD11 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.453999] The pingroup GMI_AD12 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454012] The pingroup GMI_AD13 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454025] The pingroup GMI_AD14 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454042] The pingroup GMI_WR_N was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454055] The pingroup GMI_OE_N was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454067] The pingroup GMI_DQS was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454097] The pingroup GMI_WAIT was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454119] The pingroup GMI_CS1_N was configured to RSVD1 instead of <UNKNOWN>
- [ 0.454144] The pingroup GMI_ADV_N was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454157] The pingroup GMI_CLK was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454170] The pingroup GMI_CS4_N was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454183] The pingroup GMI_CS2_N was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454195] The pingroup GMI_CS3_N was configured to RSVD1 instead of <UNKNOWN>
- [ 0.454229] The pingroup LCD_D18 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454250] The pingroup LCD_D21 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454263] The pingroup LCD_D22 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454275] The pingroup LCD_D23 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454380] The pingroup DAP4_DOUT was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454393] The pingroup DAP4_SCLK was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454440] The pingroup KB_ROW2 was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454453] The pingroup KB_ROW3 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454466] The pingroup KB_ROW4 was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454522] The pingroup GPIO_PU0 was configured to RSVD1 instead of <UNKNOWN>
- [ 0.454534] The pingroup GPIO_PU1 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454547] The pingroup GPIO_PU2 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454560] The pingroup GPIO_PU3 was configured to RSVD1 instead of <UNKNOWN>
- [ 0.454616] The pingroup CRT_VSYNC was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454629] The pingroup LCD_CS1_N was configured to RSVD2 instead of RSVD1
- [ 0.454655] The pingroup CLK1_OUT was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454667] The pingroup CLK2_OUT was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454718] The pingroup SPI1_MISO was configured to RSVD3 instead of <UNKNOWN>
- [ 0.454748] The pingroup SDMMC1_DAT1 was configured to RSVD1 instead of <UNKNOWN>
- [ 0.454841] The pingroup GPIO_PBB0 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454885] The pingroup GPIO_PBB7 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454902] The pingroup GPIO_PCC1 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.454927] The pingroup CLK2_REQ was configured to RSVD3 instead of <UNKNOWN>
- [ 0.455041] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
- [ 0.455054] The pingroup KB_ROW3 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.455067] The pingroup KB_ROW4 was configured to RSVD3 instead of <UNKNOWN>
- [ 0.455084] The pingroup CLK3_REQ was configured to RSVD3 instead of <UNKNOWN>
- [ 0.455101] The pingroup LCD_D19 was configured to RSVD2 instead of <UNKNOWN>
- [ 0.455682] Selecting UARTA as the debug console
- [ 0.455698] The debug console clock name is uarta_dbg
- [ 0.456015] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
- [ 0.482726] [USBPHY] tegra_usb_phy_init
- [ 0.485074] ram_console: got buffer at beb00000, size 100000
- [ 0.485187] ram_console: found existing buffer, size 170562, start 170562
- [ 1.036308] console [ram-1] enabled
- [ 1.036951] enterprise_edp_init: CPU regulator 0 mA
- [ 1.037121] Registering gpio keys
- [ 1.052054] enterprise_modem_init: enable baseband gpio(s)
- [ 1.052560] enterprise_modem_init: gpio config for sim_det#.
- [ 1.052768] enterprise_modem_init: gpio config for core dump when radio fatal error.
- [ 1.053148] [DISP]enterprise_panel_init(2818) IN
- [ 1.053325] [DISP]enterprise_panel_init(2834) panel id 0x0
- [ 1.068225] [DISP]enterprise_panel_init(3022) OUTinit 533MHz Timing table
- [ 1.068756] tegra: validated EMC DFS table
- [ 1.068921] [PS][cm3629]psensor_init ps_type = 1
- [ 1.069014] [GSNR] g-sensor irq_start...
- [ 1.069102] [GSNR] g-sensor irq end...
- [ 1.069263] [GYRO] gyro diag_start...
- [ 1.069351] [GYRO] gyro diag irq end...
- [ 1.069440] [GYRO] mog sleep pin...
- [ 1.073495] [BOOT_LOG] Leaving <machine>.init_machine
- [ 1.074959] tegra_iovmm_register: added iovmm-smmu
- [ 1.098631] bio: create slab <bio-0> at 0
- [ 1.100021] vgaarb: loaded
- [ 1.100266] i2c-core: driver [tps6591x] using legacy suspend method
- [ 1.100427] i2c-core: driver [tps6591x] using legacy resume method
- [ 1.100593] i2c-core: driver [tps80031] using legacy suspend method
- [ 1.100753] i2c-core: driver [tps80031] using legacy resume method
- [ 1.101673] SCSI subsystem initialized
- [ 1.103782] usbcore: registered new interface driver usbfs
- [ 1.104061] usbcore: registered new interface driver hub
- [ 1.104390] usbcore: registered new device driver usb
- [ 1.104579] tegra-otg tegra-otg: otg transceiver registered
- [ 1.106575] tps80031 4-004a: Jtag version 0x01 and Eeprom version 0x70
- [ 1.112680] Wake18 for irq=118
- [ 1.112772] Enabling wake18
- [ 1.121432] print_constraints: tps80031_VIO: 607 <--> 2100 mV at 1800 mV normal standby
- [ 1.128423] print_constraints: tps80031_SMPS1: 607 <--> 2100 mV at 1038 mV normal standby
- [ 1.135105] print_constraints: tps80031_SMPS2: 607 <--> 2100 mV at 1202 mV normal standby
- [ 1.138915] print_constraints: tps80031_SMPS3: 607 <--> 2100 mV at 1202 mV normal standby
- [ 1.142696] print_constraints: tps80031_SMPS4: 1852 <--> 2199 mV at 2817 mV normal standby
- [ 1.145479] print_constraints: tps80031_LDO1: 1000 <--> 3300 mV at 1200 mV normal standby
- [ 1.145660] set_supply: tps80031_LDO1: supplied by tps80031_VIO
- [ 1.150508] print_constraints: tps80031_LDO2: 1000 <--> 1287 mV at 1000 mV normal standby
- [ 1.153304] print_constraints: tps80031_LDO3: 1000 <--> 3300 mV at 1300 mV normal standby
- [ 1.156186] print_constraints: tps80031_LDO4: 1000 <--> 3300 mV at 3000 mV normal standby
- [ 1.159047] print_constraints: tps80031_LDO5: 1000 <--> 3300 mV at 2800 mV normal standby
- [ 1.163945] print_constraints: tps80031_LDO6: 1000 <--> 3300 mV at 2800 mV normal standby
- [ 1.168896] print_constraints: tps80031_LDO7: 1000 <--> 3300 mV at 1100 mV normal standby
- [ 1.169094] set_supply: tps80031_LDO7: supplied by tps80031_VIO
- [ 1.174097] print_constraints: tps80031_LDOLN: 1000 <--> 3300 mV at 1000 mV normal standby
- [ 1.174277] set_supply: tps80031_LDOLN: supplied by tps80031_SMPS3
- [ 1.178028] print_constraints: tps80031_LDOUSB: 1000 <--> 3300 mV at 3300 mV normal standby
- [ 1.179889] print_constraints: tps80031_VANA: 1000 <--> 3300 mV at 2100 mV normal standby
- [ 1.181975] print_constraints: tps80031_VBUS: normal standby
- [ 1.191588] Error: Driver 'tegra_smmu' is already registered, aborting...
- [ 1.191798] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 1.192803] Bluetooth: Core ver 2.16
- [ 1.193007] NET: Registered protocol family 31
- [ 1.193099] Bluetooth: HCI device and connection manager initialized
- [ 1.193190] Bluetooth: HCI socket layer initialized
- [ 1.193279] Bluetooth: L2CAP socket layer initialized
- [ 1.193465] Bluetooth: SCO socket layer initialized
- [ 1.195667] print_constraints: gpio-switch-led_3v3_en: 3300 mV normal standby
- [ 1.196083] print_constraints: gpio-switch-vib_3v_en: 3000 mV normal standby
- [ 1.196488] print_constraints: gpio-switch-srio_1v8_en: 1800 mV normal standby
- [ 1.196779] print_constraints: gpio-switch-aud_a1v8_en: 1800 mV normal standby
- [ 1.197141] print_constraints: gpio-switch-aud_3v3_en: 3300 mV normal standby
- [ 1.197362] create_regulator: tps80031_VIO: Failed to create debugfs directory
- [ 1.197597] print_constraints: gpio-switch-lcmio_1v8_en: 1800 mV normal standby
- [ 1.197953] print_constraints: gpio-switch-lcm_3v3_en: 3300 mV normal standby
- [ 1.198114] gpio_request: gpio-194 (gpio-switch-mhl_3v3_en) status -16
- [ 1.198281] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 194
- [ 1.198444] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-mhl_3v3_en
- [ 1.198605] gpio_request: gpio-36 (gpio-switch-mhl_1v2_en) status -16
- [ 1.198695] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 36
- [ 1.198856] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-mhl_1v2_en
- [ 1.199017] gpio_request: gpio-103 (gpio-switch-cam_vcm_2v85_en) status -16
- [ 1.199105] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 103
- [ 1.199264] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_vcm_2v85_en
- [ 1.199439] create_regulator: tps80031_VIO: Failed to create debugfs directory
- [ 1.199598] gpio_request: gpio-46 (gpio-switch-cam2_d1v2_en) status -16
- [ 1.199686] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 46
- [ 1.199848] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam2_d1v2_en
- [ 1.200015] create_regulator: tps80031_VIO: Failed to create debugfs directory
- [ 1.200106] gpio_request: gpio-45 (gpio-switch-cam_d1v2_en) status -16
- [ 1.200267] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 45
- [ 1.200430] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_d1v2_en
- [ 1.200520] gpio_request: gpio-220 (gpio-switch-camio_1v8_en) status -16
- [ 1.200675] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 220
- [ 1.200835] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-camio_1v8_en
- [ 1.200995] gpio_request: gpio-35 (gpio-switch-cam_a2v85_en) status -16
- [ 1.201082] gpio-switch-regulator gpio-switch-regulator: Unable to request gpio 35
- [ 1.201244] gpio-switch-regulator gpio-switch-regulator: Unable to register regulator gpio-switch-cam_a2v85_en
- [ 1.201540] print_constraints: gpio-switch-sdmmc_2v85_en: 2850 mV normal standby
- [ 1.201791] tegra: failed to map regulator to power detect cell pwrdet_nand(-19)
- [ 1.202291] tegra: failed to map regulator to power detect cell pwrdet_mipi(-19)
- [ 1.202523] tegra: failed to map regulator to power detect cell pwrdet_pex_ctl(-19)
- [ 1.202688] tegra: failed to map regulator to power detect cell pwrdet_sdmmc3(-19)
- [ 1.202909] tegra: failed regulators mapping - io power detection is left always on
- [ 1.203076] Switching to clocksource timer_us
- [ 1.203581] nvmap_page_pool_init: nvmap uc page pool size=31349 pages
- [ 1.212083] Switched to NOHz mode on CPU #0
- [ 1.212776] Switched to NOHz mode on CPU #2
- [ 1.212785] Switched to NOHz mode on CPU #3
- [ 1.212822] Switched to NOHz mode on CPU #1
- [ 1.316595] nvmap_page_pool_init: nvmap wc page pool size=31349 pages
- [ 1.429107] nvmap_page_pool_init: nvmap iwb page pool size=31349 pages
- [ 1.542376] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
- [ 1.544714] [BATT][tps65200] init chg_int interrupt.
- [ 1.545673] [BATT][tps65200] [TPS65200]: Driver registration done
- [ 1.547583] [PMU_ADC]tps80032_adc_probe:GPADC eanbled, then check calibration with map 0x7f
- [ 1.550821] NET: Registered protocol family 2
- [ 1.551234] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 1.552054] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 1.552726] TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
- [ 1.553461] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.553550] TCP reno registered
- [ 1.553712] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 1.553890] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 1.554489] NET: Registered protocol family 1
- [ 1.555299] RPC: Registered named UNIX socket transport module.
- [ 1.555459] RPC: Registered udp transport module.
- [ 1.555545] RPC: Registered tcp transport module.
- [ 1.555699] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.555790] PCI: CLS 0 bytes, default 32
- [ 1.556811] Unpacking initramfs...
- [ 1.574332] Freeing initrd memory: 284K
- [ 1.575345] host1x host1x: initialized
- [ 1.575571] PMU: registered new PMU device of type 0
- [ 1.576483] Tegra auto-hotplug initialized: disabled
- [ 1.576581] cpu-tegra: init EDP limit: 1350 MHz
- [ 1.577948] [FLT][PROBE] flashlight driver probe +++
- [ 1.578173] config_enterprise_flashlight_gpios: start...config_enterprise_flashlight_gpios: end...
- [ 1.578831] Registered led device: flashlight
- [ 1.579006] [FLT]flashlight_probe: led_count = 0
- [ 1.579164] [FLT][PROBE] flashlight driver probe ---, led_count = 1
- [ 1.579332] baseband_xmm_power_init - host_dbg_flag=0x0
- [ 1.579494] baseband_xmm_power_init:VP adding pm qos request
- [ 1.579631] [XMM_v10]baseband_xmm_power_driver_probe 0316 hr_sleep and jiffe - CPU Freq.
- [ 1.579794] [XMM_v10]enum_delay_ms=0x000003e8
- [ 1.579880] [XMM_v10]htcpcbid=128
- [ 1.580795] baseband_xmm_power_driver_probe: request enable irq wake SIM det to wakeup source
- [ 1.580922] Wake23 for irq=293
- [ 1.581081] Enabling wake23
- [ 1.581168] gpio bank wake found: wake23 for irq=66
- [ 1.581252] Enabling wake23
- [ 1.581547] delay work version htc_simhotswap_probe
- [ 1.581888] htc_simhotswap_probe(): finish SIM init status=0
- [ 1.581989] Wake23 for irq=293
- [ 1.585415] [PMU_VSYS]tps80032_vsys_alarm_register_notifier:set_irq_wake failed irq 738
- [ 1.585539] [BATT] htc_battery_probe(): finish at 1582345003 (1970-01-01 00:00:17.187341003 UTC)
- [ 1.585789] nvdumper: nvdumper_reserved:0x00000000
- [ 1.585948] nvdumper: not configured
- [ 1.604095] highmem bounce pool size: 64 pages
- [ 1.604489] ashmem: initialized
- [ 1.606052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.607176] NTFS driver 2.1.30 [Flags: R/W].
- [ 1.607523] fuse init (API version 7.17)
- [ 1.607865] Registering char device tf_driver (122:0)
- [ 1.611581] io scheduler noop registered
- [ 1.611746] io scheduler deadline registered
- [ 1.611934] io scheduler cfq registered (default)
- [ 1.613064] mpe mpe: initialized
- [ 1.614466] gr3d gr3d: initialized
- [ 1.614906] dsi dsi: initialized
- [ 1.615925] gr2d gr2d: initialized
- [ 1.616443] isp isp: initialized
- [ 1.616877] vi vi: initialized
- [ 1.617651] tegradc tegradc.0: DSI: Failed to get chip info
- [ 1.617815] tegradc tegradc.0: DSI: HS clock rate is 417000
- [ 1.770260] tegradc tegradc.0: dsi: HsTrail mipi range violated
- [ 1.770422] tegradc tegradc.0: dsi: mipi range violated
- [ 1.770579] tegradc tegradc.0: probed
- [ 1.771046] tegradc tegradc.0: probed
- [ 2.763546] Wake4 for irq=335
- [ 2.764398] nvhdcp: using "always on" policy.
- [ 2.765017] tegradc tegradc.1: probed
- [ 2.765598] tegradc tegradc.1: probed
- [ 2.765948] [DISP]mhl_sii_power(215) IN
- [ 2.781058] [DISP]mhl_sii_power(248) OUT
- [ 2.781217] gpio_request: gpio-38 (mhl_sii9234_gpio_reset) status -16
- [ 2.781307] gpio_request: gpio-23 (mhl_sii9234_gpio_intr) status -16
- [ 2.781467] [DISP]MhlTx: SiiMhlTxInitialize
- [ 2.787057] [DISP]Drv: SiiMhlTxChipInitialize: 9244
- [ 2.788530] [DISP]SiI 9234
- [ 2.788617] [DISP]Drv: WriteInitialRegisterValues
- [ 2.817668] [DISP]Drv: MHL 1.0 Compliant Clock
- [ 2.854404] [DISP]Drv: InitCBusRegs
- [ 2.868762] [DISP]Drv: Switch To D3: pinAllowD3 = 1
- [ 2.926896] Wake8 for irq=247
- [ 2.927714] input: rcp_events as /devices/virtual/input/input0
- [ 2.927829] input_set_abs_params: mix_x 941, max_x 31664, min_y 417, max_y 32053
- [ 2.928212] input: tv-touchscreen as /devices/virtual/input/input1
- [ 2.928305] [DISP]sii9234_probe: Probe success!
- [ 2.928542] i2c-core: driver [sii9234] using legacy resume method
- [ 2.929237] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
- [ 3.013222] Registered UART port ttyHS1
- [ 3.013402] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
- [ 3.043391] tegra-i2c tegra-i2c.3: I2c error status 0x00000008
- [ 3.043481] tegra-i2c tegra-i2c.3: no acknowledge from address 0x50
- [ 3.043644] tegra-i2c tegra-i2c.3: Packet status 0x00010009
- [ 3.043973] tegradc tegradc.1: error reading edid
- [ 3.173226] Registered UART port ttyHS2
- [ 3.173411] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
- [ 3.333225] Registered UART port ttyHS3
- [ 3.333403] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
- [ 3.493226] Registered UART port ttyHS4
- [ 3.493456] Initialized tegra uart driver
- [ 3.498296] loop: module loaded
- [ 3.498575] i2c-core: driver [apds9802als] using legacy suspend method
- [ 3.498666] i2c-core: driver [apds9802als] using legacy resume method
- [ 3.498906] nct1008 4-004c: Error [-19] ingetting the regulator handle for vdd of 4-004c
- [ 3.504604] nct1008 4-004c: nct1008_probe: initialized
- [ 3.511279] i2c-core: driver [nct1008] using legacy suspend method
- [ 3.511440] i2c-core: driver [nct1008] using legacy resume method
- [ 3.511748] i2c-core: driver [mpu3050] using legacy suspend method
- [ 3.511905] i2c-core: driver [mpu3050] using legacy resume method
- [ 3.512000] mpu_init
- [ 3.512344] [VIB][PROBE] vibrator_probe +++
- [ 3.512829] [VIB][PROBE] vibrator_probe ---
- [ 3.513056] [CABLE] tegra_usb_dpdn_switch: Set USB path
- [ 3.513255] [DISP]sii9234_change_usb_owner(0)
- [ 3.513629] Wake9 for irq=370
- [ 3.513778] [CABLE] usb_id_detect_init: ID=146, IRQ=0x172
- [ 3.513933] [CABLE] cable_detect_probe: Done
- [ 3.514757] PPP generic driver version 2.4.2
- [ 3.515148] PPP Deflate Compression module registered
- [ 3.515239] PPP BSD Compression module registered
- [ 3.516178] PPP MPPE Compression module registered
- [ 3.516338] NET: Registered protocol family 24
- [ 3.517116] tun: Universal TUN/TAP device driver, 1.6
- [ 3.517276] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.517731] usbcore: registered new interface driver cdc_ether
- [ 3.517993] usbcore: registered new interface driver smsc95xx
- [ 3.518167] usbcore: registered new interface driver cdc_subset
- [ 3.518336] cdc_ncm: 04-Aug-2011
- [ 3.518508] usbcore: registered new interface driver cdc_ncm
- [ 3.518674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.519090] usbcore: registered new interface driver cdc_wdm
- [ 3.519251] Initializing USB Mass Storage driver...
- [ 3.519439] usbcore: registered new interface driver usb-storage
- [ 3.519599] USB Mass Storage support registered.
- [ 3.519789] usbcore: registered new interface driver libusual
- [ 3.520198] usbcore: registered new interface driver usbserial
- [ 3.520287] usbserial: USB Serial Driver core
- [ 3.520453] USB Serial support registered for GSM modem (1-port)
- [ 3.520714] usbcore: registered new interface driver option
- [ 3.520803] option: v0.7.2:USB Driver for GSM modems
- [ 3.521057] USB Serial support registered for pl2303
- [ 3.521244] usbcore: registered new interface driver pl2303
- [ 3.521400] pl2303: Prolific PL2303 USB to serial adaptor driver
- [ 3.521488] [USBUDC] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- [ 3.521858] [USBPHY] tegra_usb_phy_open 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 3.522221] [USBPHY] tegra_usb_phy_open regulator_get(NULL, "avdd_usb")
- [ 3.523863] [USBPHY] tegra_usb_phy_power_on 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 3.524028] [USBPHY] hssync_start_delay = 0x9
- [ 3.527693] Wake19 for irq=52
- [ 3.527848] Enabling wake19
- [ 3.527935] Wake19 for irq=52
- [ 3.528018] Enabling wake19
- [ 3.528105] Wake19 for irq=52
- [ 3.528490] [USBUDC] fsl_udc_clk_suspend is_dpd:0
- [ 3.528580] [USBPHY] tegra_usb_phy_power_off 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 3.568841] utmi_phy_clk_disable: timeout waiting for phy to stabilize
- [ 3.569027] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
- [ 3.569184] [USBUDC] tegra_usb_set_vbus_state on
- [ 3.569273] [USBUDC] fsl_udc_clk_resume is_dpd:0
- [ 3.569479] [USBPHY] tegra_usb_phy_power_on 0(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 3.569570] [USBPHY] hssync_start_delay = 0x9
- [ 3.573257] [USBUDC] online = on udc->flags 2
- [ 3.573365] [USBUDC] usb_do_work 0 2
- [ 3.574138] [USB] android_init_functions rndis init
- [ 3.574584] [USB] android_init_functions accessory init
- [ 3.575011] [USB] android_init_functions mtp init
- [ 3.575285] [USB] android_init_functions ptp init
- [ 3.576859] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.577021] android_usb gadget: Number of LUNs=1
- [ 3.577143] lun0: LUN: removable file: (no medium)
- [ 3.577246] [USB] android_init_functions mass_storage init
- [ 3.577670] [USB] android_init_functions adb init
- [ 3.577901] [USB] android_init_functions cdc_ethernet init
- [ 3.578182] [USB] android_init_functions serial init
- [ 3.578663] [USB] android_init_functions projector init
- [ 3.578826] Gadget Android: controller 'fsl-tegra-udc' not recognized
- [ 3.579038] android_usb gadget: android_usb ready
- [ 3.579199] [USBUDC] fsl-tegra-udc: bind to driver android_usb
- [ 3.579836] usbcore: registered new interface driver xpad
- [ 3.580045] [TP] synaptics_ts_probe: enter
- [ 3.583236] [USBUDC] usb_do_work 0 1
- [ 3.583406] [USBUDC] tegra udc: IDLE -> ONLINE vbus:1
- [ 3.603220] [USBUDC] Charger :USB [portsc:4]
- [ 3.674510] [TP] syn_pdt_scan: memory allocate success. ptr: cdfcab20
- [ 3.674674] [TP] synaptics: 4 function supported
- [ 3.675141] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
- [ 3.675578] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
- [ 3.675941] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
- [ 3.676478] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
- [ 3.676959] [TP] syn_get_version: package_id: 3202
- [ 3.677246] [TP] syn_get_version: panel_version: 3330
- [ 3.677678] [TP] syn_get_version: packrat_number: 1100755
- [ 3.677989] [TP] syn_get_version: config version: 35443038
- [ 3.703960] [TP] synaptics: 2 function supported
- [ 3.704320] Query: 7F, Command: 0000, Control: 4B, Data: 0, INTR: 1, Funtion: 34
- [ 3.704751] Query: 88, Command: 007D, Control: 4F, Data: 13, INTR: 2, Funtion: 1
- [ 3.705580] [TP] A3:1 A5:1, A7:1
- [ 3.743371] [TP] Disable flash programming success! F01_data: 81
- [ 3.744441] [TP] synaptics: 4 function supported
- [ 3.744972] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
- [ 3.745337] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
- [ 3.745774] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
- [ 3.746309] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
- [ 3.746399] [TP] synaptics_ts_probe: pdata->version = 3330, pdata->packrat_number = 0
- [ 3.746561] [TP] CRC = AA2F9390
- [ 3.773962] [TP] synaptics: 2 function supported
- [ 3.774391] Query: 7F, Command: 0000, Control: 4B, Data: 0, INTR: 1, Funtion: 34
- [ 3.774753] Query: 88, Command: 007D, Control: 4F, Data: 13, INTR: 2, Funtion: 1
- [ 3.813377] [TP] Disable flash programming success! F01_data: 81
- [ 3.813533] [TP] syn_config_update: the same config version and CRC
- [ 3.814600] [TP] synaptics: 4 function supported
- [ 3.815136] Query: A2, Command: 0000, Control: 58, Data: 0, INTR: 1, Funtion: 34
- [ 3.815500] Query: AB, Command: 00A0, Control: 5C, Data: 13, INTR: 2, Funtion: 1
- [ 3.815934] Query: C5, Command: 00A1, Control: 62, Data: 15, INTR: 4, Funtion: 11
- [ 3.816468] Query: 1C3, Command: 01C2, Control: 10B, Data: 100, INTR: 8, Funtion: 54
- [ 3.816810] [TP] Loads customer register
- [ 3.817124] [TP] syn_get_information: finger_support: 10
- [ 3.817437] [TP] syn_get_information: max_x: 1100, max_y: 1909
- [ 3.819083] [TP] syn_get_information: X: 12, Y: 22
- [ 3.819343] [TP] syn_get_information: ts->relaxation: 255
- [ 3.819689] [TP] input_set_abs_params: mix_x 0, max_x 1100, min_y 0, max_y 1770
- [ 3.820073] input: synaptics-rmi-touchscreen as /devices/virtual/input/input2
- [ 3.820457] Wake1 for irq=393
- [ 3.820791] [TP] synaptics_ts_probe: interrupt enable: 3f
- [ 3.821229] [TP]synaptics_touch_sysfs_init: Exported GPIO 169.
- [ 3.821322] Major number of rmi_char_dev: 249
- [ 3.821727] [TP] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
- [ 3.826440] using rtc device, rtc_tps80031, for alarms
- [ 3.826629] rtc_tps80031 rtc_tps80031.0: rtc core: registered rtc_tps80031 as rtc0
- [ 3.831036] i2c /dev entries driver
- [ 3.832140] [NFC] pn544_dev_init: Loading pn544 driver
- [ 3.832283] [NFC] pn544_probe:
- [ 3.832378] config_nfc_gpios
- [ 3.832667] [NFC] pn544_probe : requesting IRQ 422
- [ 3.832759] Wake13 for irq=422
- [ 3.833185] i2c-core: driver [pn544] using legacy suspend method
- [ 3.833385] i2c-core: driver [pn544] using legacy resume method
- [ 3.833481] BMA250 G-sensor driver: init
- [ 3.833671] bma250 probe start
- [ 3.833760] BMA250 G-sensor I2C driver: gs_kvalue = 0x67FDEE07
- [ 3.834201] [GSNR][BMA250] BMA_Init: bma250_RANGE_SEL_REG++: range = 0x03, bw = 0x1f
- [ 3.834707] [GSNR][BMA250] BMA_Init: bma250_RANGE_SEL_REG--: range = 0x03, bw = 0x0a
- [ 3.835222] [GSNR][BMA250] bma250_probe:OK
- [ 3.835309] mog bma250 probe end
- [ 3.835466] i2c-core: driver [bma250] using legacy suspend method
- [ 3.835624] i2c-core: driver [bma250] using legacy resume method
- [ 3.835790] [COMP][AKM8975] AKM8975 compass driver for pana gyro: init
- [ 3.835912] [COMP][AKM8975] akm8975_probe:
- [ 3.836781] Wake15 for irq=298
- [ 3.836991] [COMP][AKM8975] akm8975_probe:OK
- [ 3.837152] i2c-core: driver [akm8975] using legacy suspend method
- [ 3.837312] i2c-core: driver [akm8975] using legacy resume method
- [ 3.837444] [GYRO][PANASONIC]
- [ 3.837448] Enter ewtzmu_i2c_probe!!
- [ 3.853971] [GYRO][PANASONIC] Register input device!
- [ 3.854310] input: compass as /devices/virtual/input/input3
- [ 3.855089] input: ewtzmu2_gyroscope as /devices/virtual/input/input4
- [ 3.873223] [GYRO][PANASONIC] PANA:GYRO:probe success
- [ 3.873460] i2c-core: driver [ewtzmu2] using legacy suspend method
- [ 3.873548] i2c-core: driver [ewtzmu2] using legacy resume method
- [ 3.873845] [PS][cm3629] cm3629_probe
- [ 3.903237] [USBUDC] send connect type 1
- [ 3.903332] [USBUDC] wake_lock
- [ 3.903499] [BATT] cable USB at 3900306003 (1970-01-01 00:00:19.505304003 UTC)
- [ 3.913407] [PS][cm3629] cm3629_read_chip_id, chip_id value = 0x82, 0xc0, ret 0
- [ 3.913568] [PS][cm3629]cm3629_probe: lp_info->ls_cmd = 0x84!
- [ 3.913727] [PS][cm3629] cm3629_probe: ls_cmd 0x84, ps1_adc_offset=0x00, ps2_adc_offset=0x00, ps_debounce=0x0
- [ 3.914071] input: lightsensor-level as /devices/virtual/input/input5
- [ 3.914731] input: proximity as /devices/virtual/input/input6
- [ 3.915158] [LS][cm3629] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da512b2
- [ 3.915249] [LS][cm3629] lightsensor_set_kvalue: als_kadc=0x12b2, als_gadc=0x13ef
- [ 3.915406] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[0], b
- [ 3.915564] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[1], d
- [ 3.915651] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[2], f
- [ 3.915807] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[3], a5
- [ 3.915966] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[4], 152
- [ 3.916052] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[5], f46
- [ 3.916212] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[6], 193e
- [ 3.916369] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[7], 2365
- [ 3.916454] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[8], 2d8c
- [ 3.916610] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[9], ffff
- [ 3.916888] [PS][cm3629] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0xFFFF0A14
- [ 3.917055] [PS][cm3629] psensor_set_kvalue: PS calibrated inte_ps1_canc = 0x14, inte_ps2_canc = 0x0A, ((ps_kparam2 >> 16) & 0xFF) = 0xFF
- [ 3.917547] [LS][cm3629] ls_initial_cmd, cmd[0] = 0x85, cmd[1] = 0x0
- [ 3.918317] [PS][cm3629] psensor_initial_cmd, finish
- [ 3.918759] Wake34 for irq=306
- [ 3.919265] [PS][cm3629] cm3629_probe: Probe success!
- [ 3.919440] Linux video capture interface: v2.00
- [ 3.919776] usbcore: registered new interface driver uvcvideo
- [ 3.919863] USB Video Class driver (1.1.1)
- [ 3.920155] trpc_sema_init: registered misc dev 10:38
- [ 3.920382] trpc_node_register: Adding 'local' to node list
- [ 3.920629] __tegra_rawchip_probe
- [ 3.920719] tegra_rawchip_init:735]
- [ 3.920805] [CAM]rawchip_spi_init
- [ 3.920987] [CAM]:spi_rawchip_probe
- [ 3.921369] tegra_rawchip_init rawchip: success
- [ 3.921458] [CAM] rawchip_open_init
- [ 3.922824] nvavp nvavp: allocated IOVM at ff00000 for AVP os
- [ 3.923246] [TP] Device Status = 0
- [ 3.923467] tegra_camera tegra_camera: tegra_camera_probe
- [ 3.924059] ar0832_init: ++
- [ 3.924249] ov5650 sensor driver loading
- [ 3.924514] ov9726 sensor driver loading
- [ 3.924762] ov2710 sensor driver loading
- [ 3.925304] i2c-core: driver [bq20z75-battery] using legacy suspend method
- [ 3.925466] i2c-core: driver [bq20z75-battery] using legacy resume method
- [ 3.926597] device-mapper: uevent: version 1.0.3
- [ 3.927008] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
- [ 3.927147] Bluetooth: HCI UART driver ver 2.2
- [ 3.927238] Bluetooth: HCI H4 protocol initialized
- [ 3.927326] Bluetooth: HCILL protocol initialized
- [ 3.928474] cpuidle: using governor ladder
- [ 3.929664] cpuidle: using governor menu
- [ 3.930122] sdhci: Secure Digital Host Controller Interface driver
- [ 3.930284] sdhci: Copyright(c) Pierre Ossman
- [ 3.930530] sdhci sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
- [ 3.931725] mmc0: Invalid maximum block size, assuming 512 bytes
- [ 3.933064] Registered led device: mmc0::
- [ 3.933366] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
- [ 3.934587] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
- [ 3.934617] mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 3.934918] sdhci sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
- [ 3.936110] mmc1: Invalid maximum block size, assuming 512 bytes
- [ 3.937374] Registered led device: mmc1::
- [ 3.937625] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
- [ 3.938850] mmc1: SDHCI controller on platform [sdhci-tegra.2] using ADMA
- [ 3.939168] [LED][PROBE] led driver probe +++
- [ 3.939635] Registered led device: amber
- [ 3.939855] Registered led device: green
- [ 3.940140] Registered led device: button-backlight
- [ 3.941355] tegra-i2c tegra-i2c.1: I2c error status 0x00000008
- [ 3.941514] tegra-i2c tegra-i2c.1: no acknowledge from address 0x32
- [ 3.941603] tegra-i2c tegra-i2c.1: Packet status 0x00010009
- [ 3.953231] LP5521-LED 1-0032: [LED] i2c_write_block retry over 1 times
- [ 3.953245] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 3.954033] [LED][PROBE] led driver probe ---
- [ 3.955824] tegra-se tegra-se: tegra_se_probe: complete
- [ 3.960661] usbcore: registered new interface driver usbhid
- [ 3.960829] usbhid: USB HID core driver
- [ 3.961457] logger: created 256K log 'log_main'
- [ 3.961690] logger: created 256K log 'log_events'
- [ 3.961982] logger: created 256K log 'log_radio'
- [ 3.962263] logger: created 256K log 'log_system'
- [ 3.962488] zram: num_devices not specified. Using default: 1
- [ 3.962649] zram: Creating 1 devices ...
- [ 3.977940] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 ddr 0
- [ 3.980281] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 4.013821] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
- [ 4.013923] mmc0: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 7 width 0 timing 0 ddr 0
- [ 4.016258] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
- [ 4.034406] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
- [ 4.049937] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1 ddr 0
- [ 4.050039] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 1 ddr 0
- [ 4.051305] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 1 ddr 0
- [ 4.052544] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 5 ddr 0
- [ 4.052716] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 3 timing 5 ddr 0
- [ 4.052827] mmc0: new high speed DDR MMC card at address 0001
- [ 4.053602] mmcblk0: mmc0:0001 K2U00M 29.1 GiB
- [ 4.056557] Primary GPT is invalid, using alternate GPT.
- [ 4.056799] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20
- [ 4.060881] mmc1: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 4.061082] enterprise_wifi_power: Powering on wifi
- [ 4.093233] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 4.117910] mmc1: clock 400000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0 timing 0 ddr 0
- [ 4.120249] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 ddr 0
- [ 4.124086] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 4.124180] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
- [ 4.124998] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 0 ddr 0
- [ 4.133999] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2 ddr 0
- [ 4.134170] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 0 timing 2 ddr 0
- [ 4.134330] mmc1: clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 7 width 2 timing 2 ddr 0
- [ 4.135486] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 4.136581] mmc1: new high speed SDIO card at address 0001
- [ 4.136858] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0 ddr 0
- [ 4.138030] enterprise_wifi_power: Powering off wifi
- [ 4.473227] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 4.514256] [AUD] SPI control for AIC3008 started successfully...
- [ 4.516157] ALSA device list:
- [ 4.516318] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- [ 4.516693] GACT probability NOT on
- [ 4.516785] Mirror/redirect action on
- [ 4.516941] u32 classifier
- [ 4.517024] Actions configured
- [ 4.517111] Netfilter messages via NETLINK v0.30.
- [ 4.517338] nf_conntrack version 0.5.0 (15678 buckets, 62712 max)
- [ 4.520199] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 4.520359] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 4.520839] xt_time: kernel timezone is -0000
- [ 4.521224] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.521750] arp_tables: (C) 2002 David S. Miller
- [ 4.522029] TCP cubic registered
- [ 4.522114] Initializing XFRM netlink socket
- [ 4.522487] NET: Registered protocol family 10
- [ 4.524033] Mobile IPv6
- [ 4.524158] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 4.524646] IPv6 over IPv4 tunneling driver
- [ 4.526409] NET: Registered protocol family 17
- [ 4.526526] NET: Registered protocol family 15
- [ 4.526792] Bluetooth: RFCOMM socket layer initialized
- [ 4.526953] Bluetooth: RFCOMM ver 1.11
- [ 4.527040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.527203] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.527443] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 4.527723] Registering SWP/SWPB emulation handler
- [ 4.545061] Disabling clocks left on by bootloader:
- [ 4.545231] audio_2x
- [ 4.545323] audio4_2x
- [ 4.545415] audio3_2x
- [ 4.545502] audio2_2x
- [ 4.545664] audio1_2x
- [ 4.545754] audio0_2x
- [ 4.545841] audio
- [ 4.545926] audio4
- [ 4.546010] audio3
- [ 4.546168] audio2
- [ 4.546252] audio1
- [ 4.546338] audio0
- [ 4.546493] uarta
- [ 4.546603] fuse_burn
- [ 4.546769] cclk_lp
- [ 4.546857] pll_x_out0
- [ 4.546943] pll_d2_out0
- [ 4.547028] pll_p_out2
- [ 4.547118] pll_c_out1
- [ 4.547384] CPU rate: 1000 MHz
- [ 4.547564] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
- [ 4.548764] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
- [ 4.548961] tegra dvfs: tegra sysfs cap interface is initialized
- [ 4.549448] tegra_actmon.emc: Completed initialization (0)
- [ 4.549662] tegra_actmon.avp: Completed initialization (0)
- [ 4.550418] gpio_request: gpio-171 (GPIO_PV3) status -16
- [ 4.550510] [GPIO_SETUP] force to obtain requested gpio: 171 (GPIO_PV3)
- [ 4.551356] [HS_MGR] (htc_headset_mgr_init) INIT
- [ 4.551548] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
- [ 4.552435] input: h2w headset as /devices/virtual/input/input7
- [ 4.552715] using input dev h2w headset for key reset
- [ 4.553451] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready
- [ 4.553757] [HS_MGR] (htc_headset_mgr_probe) --------------------
- [ 4.554023] [HS_GPIO] (htc_headset_gpio_init) INIT
- [ 4.554232] [HS_PMIC] (htc_headset_pmic_init) INIT
- [ 4.554454] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
- [ 4.554858] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
- [ 4.555020] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
- [ 4.555106] [HS_MGR] (headset_notifier_register) Register RPC_KEY notifier
- [ 4.555261] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- [ 4.555419] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
- [ 4.555676] [HS_GPIO] (htc_headset_gpio_probe) ++++++++++++++++++++
- [ 4.556064] Wake12 for irq=402
- [ 4.556260] Wake12 for irq=402
- [ 4.556349] Enabling wake12
- [ 4.556436] gpio bank wake found: wake12 for irq=119
- [ 4.556595] Enabling wake12
- [ 4.556684] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
- [ 4.556839] [HS_MGR] (hs_notify_driver_ready) HS_GPIO ready
- [ 4.556924] [HS_GPIO] (htc_headset_gpio_probe) --------------------
- [ 4.557083] [HS_PMIC] (htc_headset_pmic_probe) --------------------
- [ 4.558620] brightness orig = 255, transformed=255
- [ 4.558873] regulator_init_complete: gpio-switch-sdmmc_2v85_en: incomplete constraints, leaving on
- [ 4.559035] regulator_init_complete: gpio-switch-lcm_3v3_en: incomplete constraints, leaving on
- [ 4.559128] regulator_init_complete: gpio-switch-lcmio_1v8_en: incomplete constraints, leaving on
- [ 4.560344] regulator_init_complete: tps80031_VANA: incomplete constraints, leaving on
- [ 4.560508] regulator_init_complete: tps80031_LDOLN: incomplete constraints, leaving on
- [ 4.560598] regulator_init_complete: tps80031_LDO7: incomplete constraints, leaving on
- [ 4.560687] regulator_init_complete: tps80031_LDO6: incomplete constraints, leaving on
- [ 4.560846] regulator_init_complete: tps80031_LDO5: incomplete constraints, leaving on
- [ 4.561006] regulator_init_complete: tps80031_LDO4: incomplete constraints, leaving on
- [ 4.561096] regulator_init_complete: tps80031_LDO1: incomplete constraints, leaving on
- [ 4.561256] regulator_init_complete: tps80031_SMPS2: incomplete constraints, leaving on
- [ 4.561413] regulator_init_complete: tps80031_SMPS1: incomplete constraints, leaving on
- [ 4.561824] gpio_set_debounce: gpio-166 status -22
- [ 4.561991] Wake7 for irq=390
- [ 4.562139] gpio_set_debounce: gpio-144 status -22
- [ 4.562300] Wake27 for irq=368
- [ 4.562436] gpio_set_debounce: gpio-179 status -22
- [ 4.562526] Wake11 for irq=403
- [ 4.562901] input: gpio-keys as /devices/platform/gpio-keys.0/input/input8
- [ 4.563259] using input dev gpio-keys for key reset
- [ 4.565147] rtc_tps80031 rtc_tps80031.0: setting system clock to 2012-06-02 17:19:59 UTC (1338657599)
- [ 4.565416] Warning: unable to open an initial console.
- [ 4.565873] Freeing init memory: 248K
- [ 4.568456] init: could not import file /system/etc/init.local.rc
- [ 4.570648] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 4.573280] [USB] android_enable_function: mass_storage enabled
- [ 4.573467] [USB] android_bind_enabled_functions bind name: mass_storage
- [ 4.573652] [USB] android_usb_init_work: ret: 0
- [ 4.576665] [USBUDC] SUSPEND packet
- [ 4.683253] [USBUDC] RESET packet
- [ 4.795592] keychord: using input dev h2w headset for fevent
- [ 4.795691] keychord: using input dev gpio-keys for fevent
- [ 4.795929] init: console_init_action(): console open failed: -1, retrying...
- [ 4.843349] [USBUDC] RESET packet
- [ 4.896164] init: console_init_action(): console open failed: -1, retrying...
- [ 4.996462] init: console_init_action(): console open failed: -1, retrying...
- [ 5.076759] android_usb gadget: high speed config #1: android
- [ 5.077104] [USB] set usb_connect2pc = 1
- [ 5.096763] init: console_init_action(): console open failed: -1, retrying...
- [ 5.196986] init: console_init_action(): console open failed: -1, retrying...
- [ 5.297277] init: console_init_action(): console open failed: -1, retrying...
- [ 5.397508] init: console_init_action(): console open failed: -1, retrying...
- [ 5.497798] init: console_init_action(): console open failed: -1, retrying...
- [ 5.598087] init: console_init_action(): console open failed: -1, retrying...
- [ 5.698306] init: console_init_action(): console open failed: -1, retrying...
- [ 5.798601] init: console_init_action(): console open failed: -1, retrying...
- [ 5.898888] init: console_init_action(): console open failed: -1, retrying...
- [ 5.999110] init: console_init_action(): console open failed: -1, retrying...
- [ 6.099412] init: console_init_action(): console open failed: -1, retrying...
- [ 6.199708] init: console_init_action(): console open failed: -1, retrying...
- [ 6.299926] init: console_init_action(): console open failed: -1, retrying...
- [ 6.400217] init: console_init_action(): console open failed: -1, retrying...
- [ 6.500437] init: console_init_action(): console open failed: -1, retrying...
- [ 6.600730] init: console_init_action(): console open failed: -1, retrying...
- [ 6.697496] [BATT] First level read at 6694300002 (2012-06-02 17:20:01.632361000 UTC)
- [ 6.701021] init: console_init_action(): console open failed: -1, retrying...
- [ 7.064550] [USB] iSerial_store: HT23PW122123
- [ 7.073191] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 7.081140] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 7.089128] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 7.094117] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.107004] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: (null)
- [ 7.114104] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
- [ 7.933270] [DISP]init_complete_handler()
- [ 8.286074] [USB] iManufacturer_store: HTC
- [ 8.286506] [USB] iProduct_store: HTC One X
- [ 8.357432] [BATT] htc_batt_open: open misc device driver. at 8354227002 (2012-06-02 17:20:03.275840001 UTC)
- [ 8.358407] [BATT]get_reboot_battery_level:the reboot_battery_first_level:0x0
- [ 8.358837] [BATT] do charger control = 1 at 8355642002 (2012-06-02 17:20:03.277257001 UTC)
- [ 8.361996] [BATT][tps65200] regh 0x00=2a, regh 0x01=29, regh 0x02=63, regh 0x03=83
- [ 8.363140] [BATT][tps65200] regh 0x06=27
- [ 8.365982] [BATT][tps65200] Switch charger ON (SLOW): regh 0x03=83, regh 0x02=63
- [ 8.468584] [COMP][AKM8975] akmd_open:
- [ 8.471192] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 8.609190] [BATT] ioctl: battery level update: 79 at 8605987002 (2012-06-02 17:20:03.527602001 UTC)
- [ 8.609374] [BATT] capacity=79%, ID=1, vol=3982, temp=360, curr=0, dis_curr=56, chg_src=1, chg_en=1, over_vchg=0, batt_state=1, batt_ol=0 at 8606175002 (2012-06-02 17:20:03.527790001 UTC)
- [ 8.609557] [BATT] power_supply_changed: battery at 8606363002 (2012-06-02 17:20:03.527979001 UTC)
- [ 8.609724] [BATT] power_supply_changed: usb at 8606532002 (2012-06-02 17:20:03.528148001 UTC)
- [ 9.562382] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 9.567934] nvavp nvavp: read firmware from 'nvavp_os_0ff00000.bin' (15212 bytes)
- [ 9.585542] nvavp nvavp: entry=00000094 control=00004930 debug=00005130 size=15188
- [ 9.585889] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 9.590623] nvavp nvavp: read ucode firmware from 'nvavp_vid_ucode.bin' (41956 bytes)
- [ 9.647386] CPU1: shutdown
- [ 9.662068] CPU2: shutdown
- [ 9.680520] CPU3: shutdown
- [ 9.689812] [USB] android_switch_function: 3, before 1
- [ 9.691502] [USB] # mass_storage
- [ 9.691667] [USB] # adb
- [ 9.692452] [USB] android_switch_function: vendor_id=0xbb4, product_id=0xcd6
- [ 9.693413] [USB] android_bind_enabled_functions bind name: mass_storage
- [ 9.693727] [USB] android_bind_enabled_functions bind name: adb
- [ 9.695757] [USBF] adb_bind_config
- [ 9.696727] [USB] adb_count_set: count(0) -> 0
- [ 9.696888] [USB] adb_function_bind: done
- [ 9.748250] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 9.748657] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 9.938735] [USBUDC] SUSPEND packet
- [ 9.943317] [USB] adb_open: adbd(parent:init): tgid=395 (0)
- [ 10.045281] [USBUDC] RESET packet
- [ 10.206325] [USBUDC] RESET packet
- [ 10.431742] android_usb gadget: high speed config #1: android
- [ 12.434555] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- [ 12.584946] [LS][cm3629] lightsensor_open
- [ 12.585027] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_GET_ENABLED, enabled 0
- [ 12.585149] [LS][cm3629] lightsensor_release
- [ 12.625197] [PS][cm3629] psensor_open
- [ 12.625622] [PS][cm3629] psensor_ioctl cmd 1
- [ 12.745923] [COMP] Compass enable
- [ 12.747928] [COMP][AKM8975] [COMP] Compass disable
- [ 12.824775] [PS][cm3629] psensor_ioctl cmd 2
- [ 12.824850] [PS][cm3629] psensor_disable
- [ 12.824972] [PS][cm3629] psensor_disable: already disabled
- [ 12.825040] [PS][cm3629] psensor_release
- [ 12.825105] [PS][cm3629] psensor_disable
- [ 12.825223] [PS][cm3629] psensor_disable: already disabled
- [ 13.262633] [COMP][AKM8975] akmd_release:
- [ 13.262763] [COMP][AKM8975] AKECS_CloseDone:
- [ 13.287134] [COMP][AKM8975] akmd_open:
- [ 13.289969] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 13.599317] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 13.599537] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 13.638842] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 13.639063] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 15.103928] [LED] lp5521_amber_on +++
- [ 15.115335] [LED] lp5521_amber_on ---
- [ 15.115678] [LED] lp5521_led_blink_store +++, val = 1
- [ 15.115747] [LED] lp5521_amber_blink +++
- [ 15.137618] [LED] lp5521_amber_blink ---
- [ 15.173891] request_suspend_state: wakeup (3->0) at 15170695002 (2012-06-02 17:20:10.092309001 UTC)
- [ 15.176266] brightness orig = 102, transformed=60
- [ 15.216167] [COMP] Compass enable
- [ 15.217094] [GYRO][PANASONIC] sample_rate_state=3
- [ 15.217216] [GYRO][PANASONIC] Dont set sample_rate_state=3, when gyro sleep
- [ 15.416408] [GYRO][PANASONIC] sample_rate_state=2
- [ 15.416541] [GYRO][PANASONIC] Dont set sample_rate_state=2, when gyro sleep
- [ 15.629291] binder: send failed reply for transaction 216 to 416:459
- [ 15.686636] [COMP][AKM8975] akmd_release:
- [ 15.686711] [COMP][AKM8975] AKECS_CloseDone:
- [ 18.728422] [COMP][AKM8975] akmd_open:
- [ 18.734578] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 18.861516] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 18.861734] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 18.881066] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 18.881285] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 19.292403] [COMP][AKM8975] akmd_release:
- [ 19.292477] [COMP][AKM8975] AKECS_CloseDone:
- [ 19.995725] binder: send failed reply for transaction 444 to 416:459
- [ 24.022091] [COMP][AKM8975] akmd_open:
- [ 24.035718] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 24.200350] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 24.200626] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 24.218211] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 24.218482] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 24.237326] trpc_connect: can't connect to eaaaaaaa+, closed
- [ 24.237452] local_rpc_ioctl: can't connect to 'eaaaaaaa+' (-104)
- [ 24.237520] tegra_rpc: pid=500 ioctl=80047222/ea60 (22) ret=-104
- [ 24.608449] [COMP][AKM8975] akmd_release:
- [ 24.608523] [COMP][AKM8975] AKECS_CloseDone:
- [ 28.347716] [COMP][AKM8975] akmd_open:
- [ 28.363380] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 28.480569] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 28.480902] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 28.499569] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- [ 28.499786] nvavp nvavp: AVP os at vaddr=ceb01000 paddr=ff00000 reset_addr=0ff00094
- [ 28.519819] trpc_connect: can't connect to faaaaaaa+, closed
- [ 28.519892] local_rpc_ioctl: can't connect to 'faaaaaaa+' (-104)
- [ 28.520014] tegra_rpc: pid=513 ioctl=80047222/ea60 (22) ret=-104
- [ 28.854765] [COMP][AKM8975] akmd_release:
- [ 28.854894] [COMP][AKM8975] AKECS_CloseDone:
- [ 29.483950] acc_open
- [ 29.484201] acc_release
- [ 29.658756] [LS][cm3629] lightsensor_open
- [ 29.658842] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
- [ 29.658964] [LS][cm3629] lightsensor_enable
- [ 29.666536] [VIB] vibrator_enable, vibration start and duration time = 1 ms
- [ 29.667709] [VIB] vib_timer_func, vibration stop
- [ 29.687930] [VIB] vibrator_enable, vibration start and duration time = 21 ms
- [ 29.709102] [VIB] vib_timer_func, vibration stop
- [ 29.763296] [LS][cm3629] get_ls_adc_value:resume 1
- [ 29.768209] [LS][cm3629] report_lsensor_input_event: ADC=0x4B8, Level=5, l_thd = 0x153, h_thd = 0xf46
- [ 29.770560] [LED] lp5521_backlight_on +++
- [ 29.943495] [LED] lp5521_backlight_on ---
- [ 30.345735] brightness orig = 103, transformed=61
- [ 30.667758] brightness orig = 104, transformed=61
- [ 31.003818] brightness orig = 105, transformed=62
- [ 32.498002] [NFC] pn544_dev_open : major=10, minor=47
- [ 32.498242] [NFC] pn544_dev_ioctl power on
- [ 32.498311] [NFC] pn544_Enable: gpio=101 set_value=0
- [ 32.553269] [NFC] pn544_dev_ioctl power off
- [ 32.553401] [NFC] pn544_Disable: gpio=101 set_value=1
- [ 32.663298] [NFC] pn544_dev_ioctl power on
- [ 32.663429] [NFC] pn544_Enable: gpio=101 set_value=0
- [ 33.397963] [COMP][AKM8975] akmd_open:
- [ 33.413620] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 34.124518] [COMP][AKM8975] akmd_release:
- [ 34.124594] [COMP][AKM8975] AKECS_CloseDone:
- [ 35.002195] [USBPHY] tegra_usb_phy_open 3(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 35.002281] gpio_request: gpio--1 (uhsic_enable) status -22
- [ 35.002400] gpio_request: gpio--1 (uhsic_reset) status -22
- [ 35.005473] [USBPHY] tegra_usb_phy_power_on 3(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 35.005594] [USBPHY] uhsic_phy_power_on 3(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 35.016508] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
- [ 35.016722] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- [ 35.043845] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
- [ 35.063572] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
- [ 35.063817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 35.063886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 35.064006] usb usb1: Product: Tegra EHCI Host Controller
- [ 35.064071] usb usb1: Manufacturer: Linux 3.1.10-TripNDroid-nvtegra-3.1.10 ehci_hcd
- [ 35.064189] usb usb1: SerialNumber: tegra-ehci.1
- [ 35.066487] hub 1-0:1.0: USB hub found
- [ 35.066626] hub 1-0:1.0: 1 port detected
- [ 35.066711] [USBPHY] tegra_usb_phy_bus_connect
- [ 35.066782] [USBPHY] tegra_usb_phy_bus_connect(2983) - val=0x144f8e
- [ 35.066903] [USBPHY] tegra_usb_phy_bus_connect(2988) - val=0x14cf8e
- [ 35.067022] [USBPHY] tegra_usb_phy_bus_connect(2996) - val=0x81
- [ 35.067087] cardu_usb_hsic_phy_ready
- [ 35.067152] [XMM_v10]baseband_xmm_set_power_status{ status=2
- [ 35.067270] L0
- [ 35.067333] baseband_xmm_set_power_status: wake_lock [baseband_xmm_power] in L0
- [ 35.067455] L0 Get current gpio_get_value(ipc_hsic_active)=1
- [ 35.067519] baseband_modem_power_on VP: 03/08 22.52{
- [ 35.150782] baseband_modem_power_on }
- [ 35.150904] baseband_modem_power_on:VP pm qos request CPU 1.5GHz
- [ 35.150991] [XMM_v10]baseband_xmm_set_power_status } baseband_xmm_powerstate = 2
- [ 35.169720] [USBPHY] tegra_usb_phy_bus_connect complete
- [ 35.205683] baseband_xmm_device_add_handler
- [ 35.205844] Wake40 for irq=53
- [ 35.205912] Enabling wake40
- [ 35.205984] baseband_xmm_power_on: before enable irq wake
- [ 35.206104] Wake33 for irq=296
- [ 35.206168] Enabling wake33
- [ 35.206232] baseband_xmm_power_on: before enable irq wake Radio fatal
- [ 35.206350] Wake30 for irq=330
- [ 35.206412] Enabling wake30
- [ 35.206530] gpio bank wake found: wake30 for irq=67
- [ 35.206594] Enabling wake30
- [ 35.403594] [USBPHY] tegra_usb_phy_bus_reset patch for late 5sec
- [ 35.458793] [USBPHY] tegra_usb_phy_bus_reset, complete
- [ 35.573566] usb 1-1: new high speed USB device number 2 using tegra-ehci
- [ 35.609407] usb 1-1: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
- [ 35.609548] usb 1-1: New USB device found, idVendor=058b, idProduct=0041
- [ 35.609615] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 35.614140] baseband_xmm_device_add_handler
- [ 38.615348] [BATT] tps80032 VBUS_DETECT:1 OPA_MODE:0 BOOST_HW_PWR:0 at 38612148001 (2012-06-02 17:20:33.532789000 UTC)
- [ 38.624055] [BATT] ioctl: battery level update: 79 at 38620856001 (2012-06-02 17:20:33.542470000 UTC)
- [ 38.624195] [BATT] capacity=79%, ID=1, vol=3946, temp=366, curr=0, dis_curr=260, chg_src=1, chg_en=1, over_vchg=0, batt_state=1, batt_ol=0 at 38620999001 (2012-06-02 17:20:33.542615000 UTC)
- [ 38.625377] [BATT] power_supply_changed: battery at 38622183001 (2012-06-02 17:20:33.543798000 UTC)
- [ 39.007470] [COMP][AKM8975] akmd_open:
- [ 39.023110] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 39.586515] [COMP][AKM8975] akmd_release:
- [ 39.586591] [COMP][AKM8975] AKECS_CloseDone:
- [ 42.324148] Tegra auto-hotplug enabled
- [ 42.479351] tegra CPU: force EDP limit 1400000 kHz
- [ 42.481424] CPU1: Booted secondary processor
- [ 42.483236] Switched to NOHz mode on CPU #1
- [ 42.558461] CPU2: Booted secondary processor
- [ 42.563286] Switched to NOHz mode on CPU #2
- [ 42.648327] CPU3: Booted secondary processor
- [ 42.653243] Switched to NOHz mode on CPU #3
- [ 44.973426] [COMP][AKM8975] akmd_open:
- [ 44.976062] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 45.524255] [COMP][AKM8975] akmd_release:
- [ 45.524335] [COMP][AKM8975] AKECS_CloseDone:
- [ 49.533716] [COMP][AKM8975] akmd_open:
- [ 49.536631] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 50.079882] [COMP][AKM8975] akmd_release:
- [ 50.079966] [COMP][AKM8975] AKECS_CloseDone:
- [ 54.099047] [COMP][AKM8975] akmd_open:
- [ 54.101580] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 54.636849] [COMP][AKM8975] akmd_release:
- [ 54.636985] [COMP][AKM8975] AKECS_CloseDone:
- [ 59.651522] [COMP][AKM8975] akmd_open:
- [ 59.654102] [COMP][AKM8975] AKECS_GetOpenStatus:
- [ 60.190517] [COMP][AKM8975] akmd_release:
- [ 60.190595] [COMP][AKM8975] AKECS_CloseDone:
- [ 68.757677] [BATT] tps80032 VBUS_DETECT:1 OPA_MODE:0 BOOST_HW_PWR:0 at 68754477002 (2012-06-02 17:21:03.674935001 UTC)
- [ 68.760266] [BATT] ioctl: battery level update: 79 at 68757071002 (2012-06-02 17:21:03.678686001 UTC)
- [ 68.760355] [BATT] capacity=79%, ID=1, vol=3936, temp=373, curr=0, dis_curr=261, chg_src=1, chg_en=1, over_vchg=0, batt_state=1, batt_ol=0 at 68757159002 (2012-06-02 17:21:03.678775001 UTC)
- [ 68.760835] [BATT] power_supply_changed: battery at 68757642002 (2012-06-02 17:21:03.679257001 UTC)
- [ 75.449518] [TP] S1@538, 1847
- [ 75.554478] [TP] E1@538, 1844
- [ 98.919005] [BATT] tps80032 VBUS_DETECT:1 OPA_MODE:0 BOOST_HW_PWR:0 at 98915807003 (2012-06-02 17:21:33.836447002 UTC)
- [ 98.921595] [BATT] ioctl: battery level update: 79 at 98918399003 (2012-06-02 17:21:33.840014002 UTC)
- [ 98.921742] [BATT] capacity=79%, ID=1, vol=3941, temp=375, curr=0, dis_curr=242, chg_src=1, chg_en=1, over_vchg=0, batt_state=1, batt_ol=1 at 98918545003 (2012-06-02 17:21:33.840161002 UTC)
- [ 98.922201] [BATT] power_supply_changed: battery at 98919008003 (2012-06-02 17:21:33.840623002 UTC)
- [ 100.466670] request_suspend_state: sleep (0->3) at 100463473003 (2012-06-02 17:21:35.385087002 UTC)
- [ 100.466915] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 0
- [ 100.467041] [LS][cm3629] lightsensor_disable
- [ 100.467459] [LS][cm3629] lightsensor_release
- [ 100.467892] [LED] lp5521_backlight_off +++
- [ 100.467988] [FLT] flashlight_early_suspend start
- [ 100.468058] [FLT] flashlight_early_suspend end
- [ 100.468182] [LED][SUSPEND] lp5521_led_early_suspend +++
- [ 100.468250] [LED][SUSPEND] lp5521_led_early_suspend ---
- [ 100.468378] LS][cm3629] cm3629_early_suspend
- [ 100.468448] [TP] synaptics_ts_suspend: enter
- [ 100.468877] [TP] touch suspend, fast relasxation: ff[TP] disable palm supression
- [ 100.469670] [TP] synaptics_ts_suspend: leave
- [ 100.471425] [DISP]sii9234_early_suspend(isMHL=0, g_bGotUsbBus=0)
- [ 100.471556] [DISP]enterprise_panel_early_suspend(2737) IN
- [ 100.683226] [LED] lp5521_backlight_off ---
- [ 100.687944] [COMP][AKM8975] [COMP] Compass disable
- [ 100.713423] SysRq : Emergency Remount R/O
- [ 100.720087] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
- [ 100.768610] EXT4-fs (mmcblk0p15): re-mounted. Opts: (null)
- [ 100.777838] EXT4-fs (mmcblk0p13): re-mounted. Opts: (null)
- [ 100.782472] EXT4-fs (mmcblk0p18): re-mounted. Opts: (null)
- [ 100.783770] EXT4-fs (mmcblk0p19): re-mounted. Opts: (null)
- [ 100.783970] Emergency Remount complete
- [ 100.817104] [USBPHY] tegra_usb_phy_power_off 3(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 100.817239] [USBPHY] uhsic_phy_power_off 3(0:utmi, 1:ulpi, 2:null, 3:hsic)
- [ 100.817364] cardu_usb_hsic_phy_off
- [ 100.817431] [XMM_v10]baseband_xmm_set_power_status{ status=7
- [ 100.817498] L3
- [ 100.817564] L3 --- wake_unlock[baseband_xmm_power]
- [ 100.817689] Set gpio host active low->
- [ 100.817756] [XMM_v10]baseband_xmm_set_power_status } baseband_xmm_powerstate = 7
- [ 100.818115] [BATT][tps65200] TPS65200 shutdown
- [ 100.819071] dummy 4-0048: reset PMU
- [ 100.819629] Restarting system with command 'bootloader'.
- No errors detected
- PMIC status: start_on_event=none, last_off_event=pmu_poweroff
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement