API tools faq
paste
simhavcs

nx5_v5.2-nexus5-display

simhavcs
Oct 1st, 2019
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.35 KB | None | 0 0
raw download clone embed print report
  1. welcome to hammerhead bootloader
  2. [10] Power on reason 91
  3. [10] DDR: hynix
  4. [110] Loaded IMGDATA at 0x11000000
  5. [110] Display Init: Start
  6. [190] MDP GDSC already enabled
  7. [190] bpp 24
  8. [230] Config MIPI_CMD_PANEL.
  9. [230] display panel: ORISE
  10. [230] display panel: Default setting
  11. [360] Turn on MIPI_CMD_PANEL.
  12. [410] Display Init: Done
  13. [410] cable type from shared memory: 8
  14. [410] vibe
  15. [610] USB init ept @ 0xf96b000
  16. [630] secured device: 1
  17. [630] fastboot_init()
  18. [680] splash: fastboot_op
  19. FASTBOOT MODE
  20. PRODUCT_NAME - hammerhead
  21. VARIANT - hammerhead D821(H) 32GB
  22. HW VERSION - rev_11
  23. BOOTLOADER VERSION - HHZ20h
  24. BASEBAND VERSION - M8974A-2.0.50.2.30
  25. CARRIER INFO - None
  26. SERIAL NUMBER - 050afacd0a28b527
  27. SIGNING - production
  28. SECURE BOOT - enabled
  29. LOCK STATE - unlocked
  30. [790] splash: start
  31. [1820] Fastboot mode started
  32. [1820] udc_start()
  33. [2050] -- reset --
  34. [2060] -- portchange --
  35. [2130] -- reset --
  36. [2140] -- portchange --
  37. [2240] STALL GET_DESCRIPTOR 128 6 1536 0 10
  38. [2240] STALL GET_DESCRIPTOR 128 6 1536 0 10
  39. [2250] STALL GET_DESCRIPTOR 128 6 1536 0 10
  40. [2260] fastboot: processing commands
  41. [16330] fastboot: getvar:slot-count
  42. [16430] fastboot: getvar:slot-suffixes
  43. [16530] fastboot: download:007a2800
  44. downloading...
  45. [25990] fastboot: boot
  46. [25990] Found Appeneded Flattened Device tree
  47. [26000] DTB: not supported
  48. [26000] DTB: Use the first DTB (not found proper DTB)
  49. [26000] get_display_kcal = 0, 0, 0, x
  50. [26050] vibe
  51. [26150] splash: boot
  52. [26190] splash: unlocked
  53. [26230] cmdline: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lge.kcal=0|0|0|x lge.t
  54. [26260] Updating device tree: done
  55. [26260] booting linux @ 0x8000, ramdisk @ 0x2900000 (1757909), tags/device tree @ 0x2700000
  56. [26270] Turn off MIPI_CMD_PANEL.
  57. [26270] Continuous splash enabled, keeping panel alive.
  58. [ 0.000000] Booting Linux on physical CPU 0x0
  59. [ 0.000000] Linux version 5.2.0-02322-g33fee68163e5 (vinaysimha@vinaysimha-hpg6) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)9
  60. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d
  61. [ 0.000000] CPU: div instructions available: patching division code
  62. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  63. [ 0.000000] OF: fdt: Machine model: LGE MSM 8974 HAMMERHEAD
  64. [ 0.000000] Memory policy: Data cache writealloc
  65. [ 0.000000] cma: Reserved 256 MiB at 0x20000000
  66. [ 0.000000] percpu: Embedded 20 pages/cpu s52044 r8192 d21684 u81920
  67. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 490240
  68. [ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 console=tty0 rootwait PMOS_NO_OUTPUT_REDIRECT uart_console=enable gpt=enable lg1
  69. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  70. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  71. [ 0.000000] Memory: 1671652K/1967104K available (8192K kernel code, 835K rwdata, 3528K rodata, 1024K init, 267K bss, 33308K reserved, 2621)
  72. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  73. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  74. [ 0.000000] Tasks RCU enabled.
  75. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  76. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  77. [ 0.000000] random: get_random_bytes called from start_kernel+0x304/0x498 with crng_init=0
  78. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  79. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  80. [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  81. [ 0.000016] Switching to timer-based delay loop, resolution 52ns
  82. [ 0.000416] Console: colour dummy device 80x30
  83. [ 0.000778] printk: console [tty0] enabled
  84. [ 0.000813] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  85. [ 0.000844] pid_max: default: 32768 minimum: 301
  86. [ 0.000979] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  87. [ 0.001006] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  88. [ 0.001591] CPU: Testing write buffer coherency: ok
  89. [ 0.001852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  90. [ 0.059957] Setting up static identity map for 0x300000 - 0x300060
  91. [ 0.079956] rcu: Hierarchical SRCU implementation.
  92. [ 0.120032] smp: Bringing up secondary CPUs ...
  93. [ 0.200455] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  94. [ 0.280614] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  95. [ 0.360773] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  96. [ 0.360983] smp: Brought up 1 node, 4 CPUs
  97. [ 0.361046] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  98. [ 0.361066] CPU: All CPU(s) started in SVC mode.
  99. [ 0.362676] devtmpfs: initialized
  100. [ 0.372433] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  101. [ 0.372763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  102. [ 0.372802] futex hash table entries: 1024 (order: 4, 65536 bytes)
  103. [ 0.382633] pinctrl core: initialized pinctrl subsystem
  104. [ 0.383712] NET: Registered protocol family 16
  105. [ 0.385549] DMA: preallocated 256 KiB pool for atomic coherent allocations
  106. [ 0.386697] cpuidle: using governor menu
  107. [ 0.387323] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  108. [ 0.387350] hw-breakpoint: maximum watchpoint size is 8 bytes.
  109. [ 0.424920] vgaarb: loaded
  110. [ 0.425421] SCSI subsystem initialized
  111. [ 0.430985] usbcore: registered new interface driver usbfs
  112. [ 0.431059] usbcore: registered new interface driver hub
  113. [ 0.431139] usbcore: registered new device driver usb
  114. [ 0.432162] Advanced Linux Sound Architecture Driver Initialized.
  115. [ 0.433207] clocksource: Switched to clocksource arch_sys_counter
  116. [ 0.801934] NET: Registered protocol family 2
  117. [ 0.802404] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  118. [ 0.802444] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  119. [ 0.802510] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  120. [ 0.802600] TCP: Hash tables configured (established 8192 bind 8192)
  121. [ 0.802697] UDP hash table entries: 512 (order: 2, 16384 bytes)
  122. [ 0.802735] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  123. [ 0.802902] NET: Registered protocol family 1
  124. [ 0.803478] RPC: Registered named UNIX socket transport module.
  125. [ 0.803501] RPC: Registered udp transport module.
  126. [ 0.803520] RPC: Registered tcp transport module.
  127. [ 0.803538] RPC: Registered tcp NFSv4.1 backchannel transport module.
  128. [ 0.803563] PCI: CLS 0 bytes, default 64
  129. [ 0.803829] Trying to unpack rootfs image as initramfs...
  130. [ 0.885035] Freeing initrd memory: 1720K
  131. [ 0.885869] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available
  132. [ 0.887722] Initialise system trusted keyrings
  133. [ 0.887925] workingset: timestamp_bits=30 max_order=19 bucket_order=0
  134. [ 0.894665] NFS: Registering the id_resolver key type
  135. [ 0.894722] Key type id_resolver registered
  136. [ 0.894752] Key type id_legacy registered
  137. [ 0.895624] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  138. [ 0.896067] fuse: init (API version 7.31)
  139. [ 0.898796] Key type asymmetric registered
  140. [ 0.898829] Asymmetric key parser 'x509' registered
  141. [ 0.898927] bounce: pool size: 64 pages
  142. [ 0.899000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  143. [ 0.899039] io scheduler mq-deadline registered
  144. [ 0.899067] io scheduler kyber registered
  145. [ 0.930500] msm_serial f991d000.serial: msm_serial: detected port #0
  146. [ 0.930574] msm_serial f991d000.serial: uartclk = 7372800
  147. [ 0.930656] f991d000.serial: ttyMSM0 at MMIO 0xf991d000 (irq = 27, base_baud = 460800) is a MSM
  148. [ 0.930720] msm_serial: console setup on port #0
  149. [ 1.498869] printk: console [ttyMSM0] enabled
  150. [ 1.504144] msm_serial: driver initialized
  151. [ 1.529026] brd: module loaded
  152. [ 1.542044] loop: module loaded
  153. [ 1.542806] SCSI Media Changer driver v0.25
  154. [ 1.545643] spmi spmi-0: PMIC arbiter version v1 (0x20000002)
  155. [ 1.558728] GPIO line 360 (otg-gpio) hogged as output/high
  156. [ 1.564895] s1: supplied by regulator-dummy
  157. [ 1.565353] s2: supplied by regulator-dummy
  158. [ 1.568295] s3: supplied by regulator-dummy
  159. [ 1.572508] s4: Bringing 5100000uV into 5000000-5000000uV
  160. [ 1.576620] l1: supplied by regulator-dummy
  161. [ 1.582190] l2: supplied by regulator-dummy
  162. [ 1.586215] l3: supplied by regulator-dummy
  163. [ 1.590353] l4: supplied by regulator-dummy
  164. [ 1.594544] l5: supplied by regulator-dummy
  165. [ 1.598699] l6: supplied by regulator-dummy
  166. [ 1.602851] l7: supplied by regulator-dummy
  167. [ 1.607057] l8: supplied by regulator-dummy
  168. [ 1.611196] l9: supplied by regulator-dummy
  169. [ 1.615402] l10: supplied by regulator-dummy
  170. [ 1.619534] l11: supplied by regulator-dummy
  171. [ 1.624084] l12: supplied by regulator-dummy
  172. [ 1.628311] l13: supplied by regulator-dummy
  173. [ 1.632565] l14: supplied by regulator-dummy
  174. [ 1.636858] l15: supplied by regulator-dummy
  175. [ 1.641082] l16: supplied by regulator-dummy
  176. [ 1.645359] l17: supplied by regulator-dummy
  177. [ 1.649594] l18: supplied by regulator-dummy
  178. [ 1.653864] l19: supplied by regulator-dummy
  179. [ 1.658100] l20: supplied by regulator-dummy
  180. [ 1.662354] l21: supplied by regulator-dummy
  181. [ 1.666639] l22: supplied by regulator-dummy
  182. [ 1.670877] l23: supplied by regulator-dummy
  183. [ 1.675154] l24: supplied by regulator-dummy
  184. [ 1.679367] lvs1: supplied by regulator-dummy
  185. [ 1.683614] lvs2: supplied by regulator-dummy
  186. [ 1.687802] lvs3: supplied by regulator-dummy
  187. [ 1.692356] 5vs1: supplied by s4
  188. [ 1.696624] 5vs2: supplied by s4
  189. [ 1.701214] libphy: Fixed MDIO Bus: probed
  190. [ 1.702963] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  191. [ 1.706555] CSLIP: code copyright 1989 Regents of the University of California.
  192. [ 1.716270] usbcore: registered new interface driver ax88179_178a
  193. [ 1.723442] usbcore: registered new interface driver cdc_ether
  194. [ 1.729666] usbcore: registered new interface driver net1080
  195. [ 1.735427] usbcore: registered new interface driver cdc_subset
  196. [ 1.741245] usbcore: registered new interface driver cdc_ncm
  197. [ 1.747108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  198. [ 1.752723] ehci-pci: EHCI PCI platform driver
  199. [ 1.759199] usbcore: registered new interface driver cdc_acm
  200. [ 1.763500] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  201. [ 1.786040] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: registered as rtc0
  202. [ 1.786313] i2c /dev entries driver
  203. [ 1.792187] i2c_qup f9923000.i2c:
  204. [ 1.792187] tx channel not available
  205. [ 1.796268] i2c_qup f9924000.i2c:
  206. [ 1.796268] tx channel not available
  207. [ 1.803527] i2c_qup f9925000.i2c:
  208. [ 1.803527] tx channel not available
  209. [ 1.827907] lm3630a_bl 3-0038: LM3630A backlight register OK.
  210. [ 1.828312] i2c_qup f9968000.i2c:
  211. [ 1.828312] tx channel not available
  212. [ 1.834339] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3
  213. [ 1.843778] otg-vbus: supplied by 5vs1
  214. [ 1.848832] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  215. [ 1.851087] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  216. [ 1.858534] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  217. [ 1.865599] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations
  218. [ 1.873467] sdhci: Secure Digital Host Controller Interface driver
  219. [ 1.879957] sdhci: Copyright(c) Pierre Ossman
  220. [ 1.886236] sdhci-pltfm: SDHCI platform and OF driver helper
  221. [ 1.893782] usbcore: registered new interface driver usbhid
  222. [ 1.896362] usbhid: USB HID core driver
  223. [ 1.905861] oprofile: using timer interrupt.
  224. [ 1.906224] NET: Registered protocol family 17
  225. [ 1.910071] Key type dns_resolver registered
  226. [ 1.914783] Registering SWP/SWPB emulation handler
  227. [ 1.919884] Loading compiled-in X.509 certificates
  228. [ 2.019787] input: soc:gpio-keys as /devices/platform/soc/soc:gpio-keys/input/input0
  229. [ 2.020521] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-01-22T15:04:07 UTC (1868647)
  230. [ 2.027701] wl-reg: disabling
  231. [ 2.037815] ALSA device list:
  232. [ 2.039888] No soundcards found.
  233. [ 2.043869] Freeing unused kernel memory: 1024K
  234. [ 2.093456] Run /init as init process
  235. [ 2.103085] s1: supplied by regulator-dummy
  236. [ 2.103226] s1: Bringing 0uV into 675000-675000uV
  237. [ 2.106416] s2: supplied by regulator-dummy
  238. [ 2.111001] s2: Bringing 0uV into 500000-500000uV
  239. [ 2.115315] s3: supplied by regulator-dummy
  240. [ 2.119888] s3: Bringing 0uV into 1050000-1050000uV
  241. [ 2.124148] s4: supplied by regulator-dummy
  242. [ 2.128721] s4: Bringing 0uV into 815000-815000uV
  243. [ 2.133172] s5: supplied by regulator-dummy
  244. [ 2.138077] s6: supplied by regulator-dummy
  245. [ 2.142115] s7: supplied by regulator-dummy
  246. [ 2.146247] s8: supplied by regulator-dummy
  247. [ 2.150859] s1: supplied by regulator-dummy
  248. [ 2.154257] s1: Bringing 0uV into 1300000-1300000uV
  249. [ 2.161524] s2: supplied by regulator-dummy
  250. [ 2.163384] ocmem fdd00000.ocmem: 8 ports, 3 regions, 2048 macros, interleaved
  251. [ 2.168757] s2: Bringing 0uV into 2150000-2150000uV
  252. [ 2.175269] s3: supplied by regulator-dummy
  253. [ 2.179490] s3: Bringing 0uV into 1800000-1800000uV
  254. [ 2.186858] l1: supplied by s1
  255. [ 2.188527] l1: Bringing 0uV into 1225000-1225000uV
  256. [ 2.192715] l2: supplied by s3
  257. [ 2.196462] l2: Bringing 0uV into 1200000-1200000uV
  258. [ 2.199819] l3: supplied by s1
  259. [ 2.204539] l3: Bringing 0uV into 1225000-1225000uV
  260. [ 2.207721] l4: supplied by s1
  261. [ 2.212227] l4: Bringing 0uV into 1225000-1225000uV
  262. [ 2.215327] mmc0: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using ADMA
  263. [ 2.221791] l5: supplied by s2
  264. [ 2.227786] l5: Bringing 0uV into 1800000-1800000uV
  265. [ 2.230887] l6: supplied by s2
  266. [ 2.236419] l6: Bringing 0uV into 1800000-1800000uV
  267. [ 2.239519] l7: supplied by s2
  268. [ 2.243418] l7: Bringing 0uV into 1800000-1800000uV
  269. [ 2.246930] l8: supplied by vph-pwr
  270. [ 2.251290] l8: Bringing 0uV into 1800000-1800000uV
  271. [ 2.255025] l9: supplied by vreg-boost
  272. [ 2.259581] l9: Bringing 0uV into 1800000-1800000uV
  273. [ 2.263746] l10: supplied by vreg-boost
  274. [ 2.268153] l10: Bringing 0uV into 1800000-1800000uV
  275. [ 2.272470] l11: supplied by s1
  276. [ 2.277195] l11: Bringing 0uV into 1300000-1300000uV
  277. [ 2.280320] l12: supplied by s2
  278. [ 2.285427] l12: Bringing 0uV into 1800000-1800000uV
  279. [ 2.288730] l13: supplied by vreg-boost
  280. [ 2.293383] l13: Bringing 0uV into 1800000-1800000uV
  281. [ 2.297274] l14: supplied by s2
  282. [ 2.302118] l14: Bringing 0uV into 1800000-1800000uV
  283. [ 2.305376] l15: supplied by s2
  284. [ 2.310180] l15: Bringing 0uV into 2050000-2050000uV
  285. [ 2.313374] l16: supplied by vph-pwr
  286. [ 2.318290] l16: Bringing 0uV into 2700000-2700000uV
  287. [ 2.322299] l17: supplied by vreg-boost
  288. [ 2.326826] l17: Bringing 0uV into 2850000-2850000uV
  289. [ 2.330762] l18: supplied by vph-pwr
  290. [ 2.335563] l18: Bringing 0uV into 2850000-2850000uV
  291. [ 2.339420] l19: supplied by vph-pwr
  292. [ 2.344058] l19: Bringing 0uV into 3000000-3000000uV
  293. [ 2.347951] l20: supplied by vreg-boost
  294. [ 2.352541] l20: Bringing 0uV into 2950000-2950000uV
  295. [ 2.356819] l21: supplied by vreg-boost
  296. [ 2.361317] l21: Bringing 0uV into 2950000-2950000uV
  297. [ 2.365580] l22: supplied by vreg-boost
  298. [ 2.370742] l22: Bringing 0uV into 3000000-3000000uV
  299. [ 2.376140] random: fast init done
  300. [ 2.376240] l23: supplied by vreg-boost
  301. [ 2.382504] l23: Bringing 0uV into 3000000-3000000uV
  302. [ 2.387847] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  303. [ 2.391502] l24: supplied by vreg-boost
  304. [ 2.397327] l24: Bringing 0uV into 3075000-3075000uV
  305. [ 2.401655] lvs1: supplied by s3
  306. [ 2.406670] lvs2: supplied by s3
  307. [ 2.409871] lvs3: supplied by s3
  308. [ 2.413159] 5vs1: supplied by regulator-dummy
  309. [ 2.416372] 5vs2: supplied by regulator-dummy
  310. [ 2.463245] mmc1: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA
  311. [ 2.464567] [drm] using 192m VRAM carveout
  312. [ 2.532547] msm fd900000.mdss: [drm:msm_drm_bind] VRAM: 20100000->2c100000
  313. [ 2.532854] msm_mdp fd900100.mdp: [drm:mdp5_bind] MDP5 version v1.2
  314. [ 2.538426] msm fd900000.mdss: bound fd900100.mdp (ops mdp5_ops)
  315. [ 2.544742] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
  316. [ 2.551100] msm_dsi fd922800.dsi: fd922800.dsi supply gdsc not found, using dummy regulator
  317. [ 2.560163] panel-simple-dsi fd922800.dsi.0: fd922800.dsi.0 supply power not found, using dummy regulator
  318. [ 2.567406] msm fd900000.mdss: bound fd922800.dsi (ops dsi_ops)
  319. [ 2.577623] adreno fdb00000.adreno: fdb00000.adreno supply vdd not found, using dummy regulator
  320. [ 2.582969] adreno fdb00000.adreno: fdb00000.adreno supply vddcx not found, using dummy regulator
  321. [ 2.591457] msm fd900000.mdss: [drm:msm_gpu_init] A330: no IOMMU, fallback to VRAM carveout!
  322. [ 2.600806] msm fd900000.mdss: [drm:a3xx_gpu_init] *ERROR* No memory protection without IOMMU
  323. [ 2.608895] msm fd900000.mdss: bound fdb00000.adreno (ops a3xx_ops)
  324. [ 2.617998] mmc1: new HS200 MMC card at address 0001
  325. [ 2.624124] mmcblk1: mmc1:0001 SEM32G 29.1 GiB
  326. [ 2.628856] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
  327. [ 2.633103] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
  328. [ 2.652733] msm_mdp fd900100.mdp: [drm:mdp5_kms_init] no iommu, fallback to phys contig buffers for scanout
  329. [ 2.652806] msm fd900000.mdss: fall back to the other CTL category for INTF 1!
  330. [ 2.661579] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  331. [ 2.669407] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  332. [ 2.675917] [drm] Driver supports precise vblank timestamp query.
  333. [ 2.684037] [drm] Initialized msm 1.5.0 20130625 for fd900000.mdss on minor 0
  334. [ 2.688784] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29
  335. [ 2.769162] Console: switching to colour frame buffer device 135x120
  336. [ 2.837581] msm fd900000.mdss: fb0: msmdrmfb frame buffer device
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!