Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@pve1:~# smartctl -a /dev/sdd
- smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.17.2-1-pve] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate IronWolf Pro
- Device Model: ST4000NE001-2MA101
- Serial Number: WJG1J7BT
- LU WWN Device Id: 5 000c50 0d03327ae
- Firmware Version: EN01
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5528
- ATA Version is: ACS-4 (minor revision not indicated)
- SATA Version is: SATA 3.3, 6.0 Gb/s (current: 1.5 Gb/s)
- Local Time is: Mon Nov 24 21:55:10 2025 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 575) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 389) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x50bd) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 077 064 044 Pre-fail Always - 49711968
- 3 Spin_Up_Time 0x0003 098 091 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 037 037 020 Old_age Always - 65535
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000f 085 060 045 Pre-fail Always - 348457059
- 9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28245
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 052 052 020 Old_age Always - 49196
- 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 75
- 190 Airflow_Temperature_Cel 0x0022 067 054 040 Old_age Always - 33 (Min/Max 33/33)
- 192 Power-Off_Retract_Count 0x0032 095 095 000 Old_age Always - 10517
- 193 Load_Cycle_Count 0x0032 066 066 000 Old_age Always - 68761
- 194 Temperature_Celsius 0x0022 033 046 000 Old_age Always - 33 (0 15 0 0 0)
- 195 Hardware_ECC_Recovered 0x001a 077 064 000 Old_age Always - 49711968
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 26780h+17m+11.281s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25154866506
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 427214627554
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Interrupted (host reset) 00% 27440 -
- # 2 Short offline Interrupted (host reset) 00% 27435 -
- # 3 Short offline Completed without error 00% 26263 -
- # 4 Short offline Completed without error 00% 26109 -
- # 5 Short offline Completed without error 00% 25437 -
- # 6 Short offline Completed without error 00% 24693 -
- # 7 Short offline Completed without error 00% 23949 -
- # 8 Short offline Completed without error 00% 23229 -
- # 9 Short offline Completed without error 00% 22485 -
- #10 Short offline Completed without error 00% 21764 -
- #11 Short offline Completed without error 00% 21020 -
- #12 Short offline Completed without error 00% 20276 -
- #13 Short offline Completed without error 00% 19556 -
- #14 Short offline Completed without error 00% 18812 -
- #15 Short offline Completed without error 00% 18092 -
- #16 Short offline Completed without error 00% 17363 -
- #17 Short offline Completed without error 00% 16759 -
- #18 Short offline Completed without error 00% 16116 -
- #19 Short offline Completed without error 00% 15469 -
- #20 Short offline Completed without error 00% 14854 -
- #21 Short offline Completed without error 00% 14197 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- The above only provides legacy SMART information - try 'smartctl -x' for more
- root@pve1:~#
Advertisement
Add Comment
Please, Sign In to add comment
