Kobra S1 Gcodes

; AI_START - standalone raw G/M start gcode
; Default mesh reload is intentionally omitted because the printer loads it at boot.

M117 homing
M104 S205 I1
M140 S60 I1
G28 X Y
M109 S205 I1
M190 S60 I1

; Move to wipe area
G90
G1 F8000
G1 Y250
G1 F8000
G1 X81
G1 Y273

; Wipe nozzle
G90
G1 F8000
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81
G1 X96
G1 X81

; Park on silicone rest
G90
G1 F8000
G1 X72
G1 X77
G1 X72
G1 X77
G1 X75

M106 S255
M109 S140
M106 S0
G28 Z
G1 Z30

; Return to rest after Z home
G90
G1 F36000
G1 Y250
G1 F8000
G1 X81
G1 Y273
G90
G1 F8000
G1 X72
G1 X77
G1 X72
G1 X77
G1 X75

M104 S205 I1
G1 Z30
M117 homed

M140 S[first_layer_bed_temperature]
M104 S[first_layer_temperature[initial_tool]]
M190 S[first_layer_bed_temperature]
M109 S[first_layer_temperature[initial_tool]]

G92 E0

M117 Printing
;START GCODE ENDING
; AI_END - standalone raw G/M end gcode












; END GCODE BEGIN
M83
G1 E-5 F5000
G90
{if max_layer_z < max_print_height-1}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F900 ; Move print head further up{endif}
M204 T15000 ; normal travel acceleration

; Move to wipe area
G90
G1 F36000
G1 Y250
G1 F8000
G1 X81
G1 Y273

; Park on silicone rest
G90
G1 F8000
G1 X72
G1 X77
G1 X72
G1 X77
G1 X75
M400

{if max_layer_z < 200}G1 Z200 F900 ; Lower platform to 200 mm if it is still higher{endif}
M117 cooldown
M104 S0
M140 S0
M106 S0
M106 P1 S0
M106 P2 S0
M106 P3 S0
M400
M84
; END GCODE END





; CHANGE_FILAMENT
T[next_extruder] ; change extruder
M109 S[new_filament_temp]
;END GCODE FILAMENT