Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # wpa_supplicant -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlp2s0b1 -d
- wpa_supplicant v2.6
- random: Trying to read entropy from /dev/random
- Successfully initialized wpa_supplicant
- Initializing interface 'wlp2s0b1' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
- ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
- update_config=1
- Priority group 0
- id=0 ssid='o2-WLAN63'
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Supported cipher 00-0f-ac:10
- nl80211: Supported cipher 00-0f-ac:8
- nl80211: Supported cipher 00-0f-ac:9
- nl80211: Using driver-based off-channel TX
- nl80211: Driver-advertised extended capabilities (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
- nl80211: Driver-advertised extended capabilities mask (default) - hexdump(len=8): 00 00 00 00 00 00 00 40
- nl80211: interface wlp2s0b1 in phy phy0
- nl80211: Set mode ifindex 3 iftype 2 (STATION)
- nl80211: Subscribe to mgmt frames with non-AP handle 0x56162ae9b9f0
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0104
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=040a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=040b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=040c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=040d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=090a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=090b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=090c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=090d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0801
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0a07
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0a11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0a1a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=1101
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=1102
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0505
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x56162ae9b9f0 match=0500
- rfkill: initial event: idx=2 type=1 op=0 soft=0 hard=0
- netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
- Add interface wlp2s0b1 to a new radio phy0
- nl80211: Regulatory information - country=00
- nl80211: 2402-2472 @ 40 MHz 20 mBm
- nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
- nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
- nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
- nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
- nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
- nl80211: 57240-63720 @ 2160 MHz 0 mBm
- nl80211: Added 802.11b mode based on 802.11g information
- wlp2s0b1: Own MAC address: 68:94:23:3f:a5:5a
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
- wlp2s0b1: RSN: flushing PMKID list in the driver
- nl80211: Flush PMKIDs
- wlp2s0b1: Setting scan request: 0.100000 sec
- ENGINE: Loading dynamic engine
- ENGINE: Loading dynamic engine
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: Supplicant port status: Unauthorized
- nl80211: Skip set_supp_port(unauthorized) while not associated
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- ctrl_interface_group=10 (from group name 'wheel')
- wlp2s0b1: Added interface wlp2s0b1
- wlp2s0b1: State: DISCONNECTED -> DISCONNECTED
- nl80211: Set wlp2s0b1 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- random: Got 20/20 bytes from /dev/random
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp2s0b1: State: DISCONNECTED -> SCANNING
- wlp2s0b1: Starting AP scan for wildcard SSID
- wlp2s0b1: Add radio work 'scan'@0x56162aebf090
- wlp2s0b1: First radio work item in the queue - schedule start immediately
- wlp2s0b1: Starting radio work 'scan'@0x56162aebf090 after 0.000023 second wait
- wlp2s0b1: nl80211: scan request
- Scan requested (ret=0) - scan timeout 10 seconds
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp2s0b1
- wlp2s0b1: nl80211: Scan trigger
- wlp2s0b1: Event SCAN_STARTED (47) received
- wlp2s0b1: Own scan request started a scan in 0.000114 seconds
- EAPOL: disable timer tick
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp2s0b1
- wlp2s0b1: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp2s0b1: Event SCAN_RESULTS (3) received
- wlp2s0b1: Scan completed in 0.958674 seconds
- nl80211: Received scan results (23 BSSes)
- wlp2s0b1: BSS: Start scan result update 1
- wlp2s0b1: BSS: Add new id 0 BSSID 9c:80:df:03:2a:cc SSID 'EasyBox-032A18' freq 2437
- wlp2s0b1: BSS: Add new id 1 BSSID 38:10:d5:0c:c8:e6 SSID 'FRITZ!Box 7412 II' freq 2462
- wlp2s0b1: BSS: Add new id 2 BSSID e4:3e:d7:6f:10:2b SSID 'o2-WLAN40' freq 2462
- wlp2s0b1: BSS: Add new id 3 BSSID b0:ea:bc:88:cf:03 SSID 'o2-WLAN63' freq 2442
- wlp2s0b1: BSS: Add new id 4 BSSID 78:94:b4:0c:54:8c SSID 'KamerDou' freq 2412
- wlp2s0b1: BSS: Add new id 5 BSSID a8:d3:f7:2c:67:df SSID 'o2-WLAN40' freq 2437
- wlp2s0b1: BSS: Add new id 6 BSSID 84:16:f9:5b:3d:ae SSID 'TP-LINK_3DAE' freq 2442
- wlp2s0b1: BSS: Add new id 7 BSSID 00:24:fe:a1:ed:6e SSID 'w234' freq 2412
- wlp2s0b1: BSS: Add new id 8 BSSID b4:a5:ef:bc:05:ac SSID 'EasyBox-429969' freq 2412
- wlp2s0b1: BSS: Add new id 9 BSSID e4:3e:d7:69:bf:01 SSID 'o2-WLAN73' freq 2457
- wlp2s0b1: BSS: Add new id 10 BSSID d4:63:fe:30:9a:e4 SSID 'o2-WLAN86' freq 2417
- wlp2s0b1: BSS: Add new id 11 BSSID 38:10:d5:d3:49:6b SSID 'FRITZ!Box 7490' freq 2412
- wlp2s0b1: BSS: Add new id 12 BSSID e0:60:66:59:65:1d SSID 'FBAH' freq 2437
- wlp2s0b1: BSS: Add new id 13 BSSID e0:28:6d:0f:ad:50 SSID 'FRITZ!Box 7430 NE' freq 2412
- wlp2s0b1: BSS: Add new id 14 BSSID e0:60:66:22:fc:e9 SSID 'feufeufeu' freq 2462
- wlp2s0b1: BSS: Add new id 15 BSSID a0:64:8f:41:6b:e8 SSID 'Yuvabot' freq 2417
- wlp2s0b1: BSS: Add new id 16 BSSID f4:f2:6d:b0:4c:be SSID 'Sami Wifi' freq 2462
- wlp2s0b1: BSS: Add new id 17 BSSID e4:3e:d7:7b:58:5b SSID 'o2-WLAN27' freq 2457
- wlp2s0b1: BSS: Add new id 18 BSSID c8:d3:ff:c4:41:85 SSID 'DIRECT-84-HP ENVY 5640 series' freq 2412
- wlp2s0b1: BSS: Add new id 19 BSSID 78:94:b4:06:69:74 SSID 'NowISeeYou' freq 2412
- wlp2s0b1: BSS: Add new id 20 BSSID 5c:dc:96:a1:e0:29 SSID 'o2-WLAN61' freq 2432
- wlp2s0b1: BSS: Add new id 21 BSSID e0:60:66:59:65:1e SSID 'Telekom_FON' freq 2437
- wlp2s0b1: BSS: Add new id 22 BSSID 60:c5:a8:60:15:0f SSID 'WG_AP_60150F' freq 2437
- BSS: last_scan_res_used=23/32
- wlp2s0b1: New scan results available (own=1 ext=0)
- wlp2s0b1: Radio work 'scan'@0x56162aebf090 done in 0.959484 seconds
- wlp2s0b1: radio_work_free('scan'@0x56162aebf090: num_active_works --> 0
- wlp2s0b1: Selecting BSS from priority group 0
- wlp2s0b1: 0: 9c:80:df:03:2a:cc ssid='EasyBox-032A18' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-46 freq=2437
- wlp2s0b1: skip - SSID mismatch
- wlp2s0b1: 1: 38:10:d5:0c:c8:e6 ssid='FRITZ!Box 7412 II' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-54 freq=2462 wps
- wlp2s0b1: skip - SSID mismatch
- wlp2s0b1: 2: e4:3e:d7:6f:10:2b ssid='o2-WLAN40' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-55 freq=2462 wps
- wlp2s0b1: skip - SSID mismatch
- wlp2s0b1: 3: b0:ea:bc:88:cf:03 ssid='o2-WLAN63' wpa_ie_len=0 rsn_ie_len=26 caps=0x431 level=-57 freq=2442 wps
- wlp2s0b1: selected based on RSN IE
- wlp2s0b1: selected BSS b0:ea:bc:88:cf:03 ssid='o2-WLAN63'
- wlp2s0b1: Considering connect request: reassociate: 0 selected: b0:ea:bc:88:cf:03 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x56162ae9c020 current_ssid=(nil)
- wlp2s0b1: Request association with b0:ea:bc:88:cf:03
- wlp2s0b1: Add radio work 'sme-connect'@0x56162aebf090
- wlp2s0b1: First radio work item in the queue - schedule start immediately
- wlp2s0b1: Starting radio work 'sme-connect'@0x56162aebf090 after 0.000015 second wait
- wlp2s0b1: Automatic auth_alg selection: 0x1
- wlp2s0b1: Overriding auth_alg selection: 0x1
- RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
- RSN: Search for BSSID b0:ea:bc:88:cf:03
- RSN: No PMKSA cache entry found
- wlp2s0b1: RSN: using IEEE 802.11i/D9.0
- wlp2s0b1: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
- wlp2s0b1: WPA: Selected mgmt group cipher 32
- wlp2s0b1: WPA: clearing AP WPA IE
- WPA: set AP RSN IE - hexdump(len=28): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06
- wlp2s0b1: WPA: using GTK CCMP
- wlp2s0b1: WPA: using PTK CCMP
- wlp2s0b1: WPA: using KEY_MGMT WPA-PSK
- wlp2s0b1: WPA: not using MGMT group cipher
- WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
- FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
- RRM: Determining whether RRM can be used - device support: 0x10
- RRM: No RRM in network
- wlp2s0b1: Cancelling scan request
- wlp2s0b1: SME: Trying to authenticate with b0:ea:bc:88:cf:03 (SSID='o2-WLAN63' freq=2442 MHz)
- wlp2s0b1: State: SCANNING -> AUTHENTICATING
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - EAP fail=0
- EAPOL: External notification - portControl=Auto
- Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
- nl80211: Authenticate (ifindex=3)
- * bssid=b0:ea:bc:88:cf:03
- * freq=2442
- * SSID - hexdump_ascii(len=9):
- 6f 32 2d 57 4c 41 4e 36 33 o2-WLAN63
- * IEs - hexdump(len=0): [NULL]
- * Auth Type 0
- nl80211: Authentication request send successfully
- nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp2s0b1
- nl80211: New station b0:ea:bc:88:cf:03
- nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp2s0b1
- nl80211: Authenticate event
- wlp2s0b1: Event AUTH (11) received
- wlp2s0b1: SME: Authentication response: peer=b0:ea:bc:88:cf:03 auth_type=0 auth_transaction=2 status_code=0
- wlp2s0b1: Trying to associate with b0:ea:bc:88:cf:03 (SSID='o2-WLAN63' freq=2442 MHz)
- wlp2s0b1: State: AUTHENTICATING -> ASSOCIATING
- nl80211: Set wlp2s0b1 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
- nl80211: Associate (ifindex=3)
- * bssid=b0:ea:bc:88:cf:03
- * freq=2442
- * SSID - hexdump_ascii(len=9):
- 6f 32 2d 57 4c 41 4e 36 33 o2-WLAN63
- * IEs - hexdump(len=32): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 00 00 00 00 01 00 00 40
- * WPA Versions 0x2
- * pairwise=0xfac04
- * group=0xfac04
- * akm=0xfac02
- nl80211: Association request send successfully
- nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlp2s0b1
- nl80211: Associate event
- wlp2s0b1: Event ASSOC (0) received
- wlp2s0b1: Association info event
- resp_ies - hexdump(len=133): 01 08 12 24 48 6c 82 04 0b 16 32 04 0c 18 30 60 2d 1a 2c 00 1e ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3d 16 07 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 48 01 00 7f 01 01 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20 dd 05 00 09 86 00 00
- wlp2s0b1: freq=2442 MHz
- FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
- wlp2s0b1: State: ASSOCIATING -> ASSOCIATED
- nl80211: Set wlp2s0b1 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- wlp2s0b1: Associated to a new BSS: BSSID=b0:ea:bc:88:cf:03
- wlp2s0b1: Associated with b0:ea:bc:88:cf:03
- wlp2s0b1: WPA: Association event - clear replay counter
- wlp2s0b1: WPA: Clear old PTK
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- EAPOL: External notification - EAP success=0
- EAPOL: External notification - portEnabled=1
- EAPOL: SUPP_PAE entering state CONNECTING
- EAPOL: enable timer tick
- EAPOL: SUPP_BE entering state IDLE
- wlp2s0b1: Setting authentication timeout: 10 sec 0 usec
- wlp2s0b1: Cancelling scan request
- WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
- WMM AC: U-APSD queues=0x0
- WMM AC: Valid WMM association, WMM AC is enabled
- wlp2s0b1: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
- l2_packet_receive: src=b0:ea:bc:88:cf:03 len=99
- wlp2s0b1: RX EAPOL from b0:ea:bc:88:cf:03
- wlp2s0b1: Setting authentication timeout: 10 sec 0 usec
- wlp2s0b1: IEEE 802.1X RX: version=2 type=3 length=95
- wlp2s0b1: EAPOL-Key type=2
- wlp2s0b1: key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
- wlp2s0b1: key_length=16 key_data_length=0
- replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
- key_nonce - hexdump(len=32): 00 ec b0 62 44 7f 2a a5 ff fe df 4b 42 08 af 94 31 5e b7 c2 ff 9a 77 14 6d 4e 28 54 8c 1c b9 d0
- key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
- key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
- key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- wlp2s0b1: State: ASSOCIATED -> 4WAY_HANDSHAKE
- wlp2s0b1: WPA: RX message 1 of 4-Way Handshake from b0:ea:bc:88:cf:03 (ver=2)
- RSN: msg 1/4 key data - hexdump(len=0):
- WPA: Renewed SNonce - hexdump(len=32): 46 e1 ac ca d5 53 5c c1 06 f6 e2 43 56 24 4c 7f dc dc 39 25 7b 60 67 ba cc 4f 00 8f 61 fa 40 42
- WPA: PTK derivation - A1=68:94:23:3f:a5:5a A2=b0:ea:bc:88:cf:03
- WPA: Nonce1 - hexdump(len=32): 46 e1 ac ca d5 53 5c c1 06 f6 e2 43 56 24 4c 7f dc dc 39 25 7b 60 67 ba cc 4f 00 8f 61 fa 40 42
- WPA: Nonce2 - hexdump(len=32): 00 ec b0 62 44 7f 2a a5 ff fe df 4b 42 08 af 94 31 5e b7 c2 ff 9a 77 14 6d 4e 28 54 8c 1c b9 d0
- WPA: PMK - hexdump(len=32): [REMOVED]
- WPA: PTK - hexdump(len=48): [REMOVED]
- WPA: KCK - hexdump(len=16): [REMOVED]
- WPA: KEK - hexdump(len=16): [REMOVED]
- WPA: TK - hexdump(len=16): [REMOVED]
- WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
- WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
- wlp2s0b1: WPA: Sending EAPOL-Key 2/4
- WPA: KCK - hexdump(len=16): [REMOVED]
- WPA: Derived Key MIC - hexdump(len=16): b1 7b 2b c6 f6 4e fa 69 ff e7 a3 6c ec b1 26 e2
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
- nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlp2s0b1
- nl80211: Ignore connect event (cmd=46) when using userspace SME
- nl80211: Drv Event 36 (NL80211_CMD_REG_CHANGE) received for wlp2s0b1
- nl80211: Regulatory domain change
- * initiator=3
- * type=0
- * alpha2=DE
- wlp2s0b1: Event CHANNEL_LIST_CHANGED (28) received
- wlp2s0b1: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=DE
- wlp2s0b1: Updating hw mode
- nl80211: Regulatory information - country=DE (DFS-ETSI)
- nl80211: 2400-2483 @ 40 MHz 20 mBm
- nl80211: 5150-5250 @ 80 MHz 20 mBm (no outdoor)
- nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
- nl80211: 5470-5725 @ 160 MHz 26 mBm (DFS)
- nl80211: 5725-5875 @ 80 MHz 13 mBm
- nl80211: 57000-66000 @ 2160 MHz 40 mBm
- nl80211: Added 802.11b mode based on 802.11g information
- l2_packet_receive: src=b0:ea:bc:88:cf:03 len=163
- wlp2s0b1: RX EAPOL from b0:ea:bc:88:cf:03
- wlp2s0b1: IEEE 802.1X RX: version=2 type=3 length=159
- wlp2s0b1: EAPOL-Key type=2
- wlp2s0b1: key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
- wlp2s0b1: key_length=16 key_data_length=64
- replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
- key_nonce - hexdump(len=32): 00 ec b0 62 44 7f 2a a5 ff fe df 4b 42 08 af 94 31 5e b7 c2 ff 9a 77 14 6d 4e 28 54 8c 1c b9 d0
- key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- key_rsc - hexdump(len=8): 48 00 00 00 00 00 00 00
- key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
- key_mic - hexdump(len=16): c9 d5 39 cb 21 52 7f 0e 76 e2 2c c6 51 87 29 99
- RSN: encrypted key data - hexdump(len=64): 46 41 40 2e 74 0b bf f5 36 00 5e 27 4e d6 3a e2 86 81 01 59 eb 0c 3c e6 cd 63 1c 25 47 fc 5b 08 36 bc f7 07 20 6f 87 34 0c 90 ac f1 73 ae a8 a6 d4 4b 13 55 74 61 17 49 e6 06 09 6b 1d 9e b2 f7
- WPA: decrypted EAPOL-Key key data - hexdump(len=56): [REMOVED]
- wlp2s0b1: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
- wlp2s0b1: WPA: RX message 3 of 4-Way Handshake from b0:ea:bc:88:cf:03 (ver=2)
- WPA: IE KeyData - hexdump(len=56): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06 dd 16 00 0f ac 01 01 00 8e e2 92 d4 5b 5d 8f ed 4a 07 44 a4 55 fd 76 f6 dd 00 00 00
- WPA: RSN IE in EAPOL-Key - hexdump(len=28): 30 1a 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 80 00 00 00 00 0f ac 06
- WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
- wlp2s0b1: WPA: Sending EAPOL-Key 4/4
- WPA: KCK - hexdump(len=16): [REMOVED]
- WPA: Derived Key MIC - hexdump(len=16): 8b fb d7 c5 cb 82 4e 14 89 89 89 a8 b6 24 d7 91
- wlp2s0b1: WPA: Installing PTK to the driver
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=3 addr=0x56162ae9ca28 key_idx=0 set_tx=1 seq_len=6 key_len=16
- nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
- nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
- addr=b0:ea:bc:88:cf:03
- EAPOL: External notification - portValid=1
- wlp2s0b1: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
- RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
- WPA: Group Key - hexdump(len=16): [REMOVED]
- wlp2s0b1: WPA: Installing GTK to the driver (keyidx=1 tx=0 len=16)
- WPA: RSC - hexdump(len=6): 48 00 00 00 00 00
- wpa_driver_nl80211_set_key: ifindex=3 (wlp2s0b1) alg=3 addr=0x5616290d8f33 key_idx=1 set_tx=0 seq_len=6 key_len=16
- nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
- nl80211: KEY_SEQ - hexdump(len=6): 48 00 00 00 00 00
- broadcast key
- wlp2s0b1: WPA: Key negotiation completed with b0:ea:bc:88:cf:03 [PTK=CCMP GTK=CCMP]
- wlp2s0b1: Cancelling authentication timeout
- wlp2s0b1: State: GROUP_HANDSHAKE -> COMPLETED
- wlp2s0b1: Radio work 'sme-connect'@0x56162aebf090 done in 0.020752 seconds
- wlp2s0b1: radio_work_free('sme-connect'@0x56162aebf090: num_active_works --> 0
- wlp2s0b1: CTRL-EVENT-CONNECTED - Connection to b0:ea:bc:88:cf:03 completed [id=0 id_str=]
- nl80211: Set wlp2s0b1 operstate 0->1 (UP)
- netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
- EAPOL: External notification - portValid=1
- EAPOL: External notification - EAP success=1
- EAPOL: SUPP_PAE entering state AUTHENTICATING
- EAPOL: SUPP_BE entering state SUCCESS
- EAP: EAP entering state DISABLED
- EAPOL: SUPP_PAE entering state AUTHENTICATED
- EAPOL: Supplicant port status: Authorized
- nl80211: Set supplicant port authorized for b0:ea:bc:88:cf:03
- EAPOL: SUPP_BE entering state IDLE
- EAPOL authentication completed - result=SUCCESS
- nl80211: Set rekey offload
- nl80211: Driver does not support rekey offload
- RTM_NEWLINK: ifi_index=3 ifname=wlp2s0b1 operstate=6 linkmode=1 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
- EAPOL: startWhen --> 0
- EAPOL: disable timer tick
- # ip a
- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
- link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
- valid_lft forever preferred_lft forever
- inet6 ::1/128 scope host
- valid_lft forever preferred_lft forever
- 2: enp12s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
- link/ether d4:be:d9:6a:41:c0 brd ff:ff:ff:ff:ff:ff
- 3: wlp2s0b1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
- link/ether 68:94:23:3f:a5:5a brd ff:ff:ff:ff:ff:ff
- inet6 2a01:c22:3415:3200:6a94:23ff:fe3f:a55a/64 scope global dynamic mngtmpaddr
- valid_lft 245603sec preferred_lft 159203sec
- inet6 fe80::6a94:23ff:fe3f:a55a/64 scope link
- valid_lft forever preferred_lft forever
- # ip r
- 127.0.0.0/8 via 127.0.0.1 dev lo
- # rc-status --all
- Runlevel: sysinit
- sysfs [ started ]
- devfs [ started ]
- dmesg [ started ]
- udev [ started ]
- opentmpfiles-dev [ started ]
- udev-trigger [ started ]
- Runlevel: boot
- hwclock [ started ]
- modules [ started ]
- fsck [ started ]
- root [ started ]
- swap [ started ]
- localmount [ started ]
- opentmpfiles-setup [ started ]
- hostname [ started ]
- urandom [ started ]
- sysctl [ started ]
- bootmisc [ started ]
- dbus [ started ]
- syslog-ng [ started ]
- consolekit [ started ]
- termencoding [ started ]
- consolefont [ started ]
- fbcondecor [ started ]
- loopback [ started ]
- procfs [ started ]
- keymaps [ started ]
- binfmt [ started ]
- net.lo [ started ]
- xdm [ started ]
- Runlevel: single
- Runlevel: default
- wpa_supplicant [ stopped ]
- netmount [ scheduled ]
- sshd [ started ]
- acpid [ started ]
- laptop_mode [ started ]
- lm_sensors [ started ]
- bluetooth [ started ]
- cupsd [ started ]
- ntp-client [ stopped ]
- vixie-cron [ started ]
- alsasound [ started ]
- numlock [ started ]
- fuse [ started ]
- local [ started ]
- Runlevel: nonetwork
- local [ started ]
- Runlevel: shutdown
- savecache [ stopped ]
- killprocs [ stopped ]
- mount-ro [ stopped ]
- Dynamic Runlevel: hotplugged
- net.wlp2s0b1 [ inactive ]
- Dynamic Runlevel: needed/wanted
- xdm-setup [ started ]
- modules-load [ started ]
- Dynamic Runlevel: manual
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement