Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.49-unRAID] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD30EFRX-68EUZN0
- Serial Number: WD-WMC4N1716391
- LU WWN Device Id: 5 0014ee 6aee192a2
- Firmware Version: 80.00A80
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Sat Aug 4 21:22:24 2018 CST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 113) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (40860) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 410) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x703d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 18
- 3 Spin_Up_Time POS--K 179 177 021 - 6041
- 4 Start_Stop_Count -O--CK 100 100 000 - 95
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 058 058 000 - 31074
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 95
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 43
- 193 Load_Cycle_Count -O--CK 185 185 000 - 47431
- 194 Temperature_Celsius -O---K 118 112 000 - 32
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 1
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 3
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 13
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 13 [12] occurred at disk power-on lifetime: 31050 hours (1293 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 89 27 e0 e0 00 Error: UNC 1344 sectors at LBA = 0x14f8927e0 = 5629356000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 89 25 68 e0 08 1d+21:23:25.688 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 20 28 e0 08 1d+21:23:25.678 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 1a e8 e0 08 1d+21:23:25.676 READ DMA EXT
- 25 00 00 01 80 00 01 4f 89 19 68 e0 08 1d+21:23:25.658 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 14 28 e0 08 1d+21:23:25.656 READ DMA EXT
- Error 12 [11] occurred at disk power-on lifetime: 31050 hours (1293 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 61 ac a8 e0 00 Error: UNC 1344 sectors at LBA = 0x14f61aca8 = 5626768552
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 61 a8 28 e0 08 1d+21:23:03.184 READ DMA EXT
- 25 00 00 01 80 00 01 4f 61 a6 a8 e0 08 1d+21:23:03.169 READ DMA EXT
- 25 00 00 05 40 00 01 4f 61 a1 68 e0 08 1d+21:23:03.167 READ DMA EXT
- 25 00 00 05 40 00 01 4f 61 9c 28 e0 08 1d+21:23:03.164 READ DMA EXT
- 25 00 00 01 80 00 01 4f 61 9a a8 e0 08 1d+21:23:03.150 READ DMA EXT
- Error 11 [10] occurred at disk power-on lifetime: 31050 hours (1293 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 4c 48 48 e0 00 Error: UNC 1344 sectors at LBA = 0x14f4c4848 = 5625366600
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 4c 45 e8 e0 08 1d+21:22:49.469 READ DMA EXT
- 25 00 00 05 40 00 01 4f 4c 40 a8 e0 08 1d+21:22:49.467 READ DMA EXT
- 25 00 00 01 80 00 01 4f 4c 3f 28 e0 08 1d+21:22:49.451 READ DMA EXT
- 25 00 00 05 40 00 01 4f 4c 39 e8 e0 08 1d+21:22:49.448 READ DMA EXT
- 25 00 00 05 40 00 01 4f 4c 34 a8 e0 08 1d+21:22:49.438 READ DMA EXT
- Error 10 [9] occurred at disk power-on lifetime: 31050 hours (1293 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 0d eb 88 e0 00 Error: UNC 1344 sectors at LBA = 0x14f0deb88 = 5621279624
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 0d e7 28 e0 08 1d+21:22:14.851 READ DMA EXT
- 25 00 00 01 80 00 01 4f 0d e5 a8 e0 08 1d+21:22:14.834 READ DMA EXT
- 25 00 00 05 40 00 01 4f 0d e0 68 e0 08 1d+21:22:14.831 READ DMA EXT
- 25 00 00 05 40 00 01 4f 0d db 28 e0 08 1d+21:22:14.828 READ DMA EXT
- 25 00 00 01 80 00 01 4f 0d d9 a8 e0 08 1d+21:22:14.812 READ DMA EXT
- Error 9 [8] occurred at disk power-on lifetime: 31004 hours (1291 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 01 80 00 01 4f 89 27 e0 e0 00 Error: UNC 384 sectors at LBA = 0x14f8927e0 = 5629356000
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 01 80 00 01 4f 89 27 48 e0 08 3d+18:22:07.956 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 22 08 e0 08 3d+18:22:07.953 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 1c c8 e0 08 3d+18:22:07.951 READ DMA EXT
- 25 00 00 01 80 00 01 4f 89 1b 48 e0 08 3d+18:22:07.860 READ DMA EXT
- 25 00 00 05 40 00 01 4f 89 16 08 e0 08 3d+18:22:07.857 READ DMA EXT
- Error 8 [7] occurred at disk power-on lifetime: 31004 hours (1291 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 61 ac a8 e0 00 Error: UNC 1344 sectors at LBA = 0x14f61aca8 = 5626768552
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 61 aa c8 e0 08 3d+18:21:16.064 READ DMA EXT
- 25 00 00 01 80 00 01 4f 61 a9 48 e0 08 3d+18:21:16.040 READ DMA EXT
- 25 00 00 05 40 00 01 4f 61 a4 08 e0 08 3d+18:21:16.022 READ DMA EXT
- 25 00 00 05 40 00 01 4f 61 9e c8 e0 08 3d+18:21:16.013 READ DMA EXT
- 25 00 00 05 40 00 01 4f 61 99 88 e0 08 3d+18:21:16.010 READ DMA EXT
- Error 7 [6] occurred at disk power-on lifetime: 31004 hours (1291 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 4c 48 48 e0 00 Error: UNC 1344 sectors at LBA = 0x14f4c4848 = 5625366600
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 4c 43 48 e0 08 3d+18:20:47.763 READ DMA EXT
- 25 00 00 01 80 00 01 4f 4c 41 c8 e0 08 3d+18:20:47.678 READ DMA EXT
- 25 00 00 05 40 00 01 4f 4c 3c 88 e0 08 3d+18:20:47.676 READ DMA EXT
- 25 00 00 05 40 00 01 4f 4c 37 48 e0 08 3d+18:20:47.673 READ DMA EXT
- 25 00 00 01 80 00 01 4f 4c 35 c8 e0 08 3d+18:20:47.637 READ DMA EXT
- Error 6 [5] occurred at disk power-on lifetime: 31004 hours (1291 days + 20 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 05 40 00 01 4f 0e 77 30 e0 00 Error: UNC 1344 sectors at LBA = 0x14f0e7730 = 5621315376
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 25 00 00 05 40 00 01 4f 0e 74 88 e0 08 3d+18:19:36.427 READ DMA EXT
- 25 00 00 05 40 00 01 4f 0e 6f 48 e0 08 3d+18:19:36.424 READ DMA EXT
- 25 00 00 01 80 00 01 4f 0e 6d c8 e0 08 3d+18:19:36.409 READ DMA EXT
- 25 00 00 05 40 00 01 4f 0e 68 88 e0 08 3d+18:19:36.406 READ DMA EXT
- 25 00 00 05 40 00 01 4f 0e 63 48 e0 08 3d+18:19:36.399 READ DMA EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed: read failure 10% 31073 5621315376
- # 2 Extended offline Completed: read failure 10% 31061 5621315376
- # 3 Short offline Completed without error 00% 1365 -
- # 4 Short offline Completed without error 00% 1365 -
- # 5 Short offline Completed without error 00% 1365 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 32 Celsius
- Power Cycle Min/Max Temperature: 28/36 Celsius
- Lifetime Min/Max Temperature: 12/40 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (383)
- Index Estimated Time Temperature Celsius
- 384 2018-08-04 13:25 34 ***************
- ... ..(347 skipped). .. ***************
- 254 2018-08-04 19:13 34 ***************
- 255 2018-08-04 19:14 33 **************
- ... ..( 40 skipped). .. **************
- 296 2018-08-04 19:55 33 **************
- 297 2018-08-04 19:56 32 *************
- ... ..( 51 skipped). .. *************
- 349 2018-08-04 20:48 32 *************
- 350 2018-08-04 20:49 34 ***************
- ... ..( 32 skipped). .. ***************
- 383 2018-08-04 21:22 34 ***************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 250950 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement