API tools faq
paste
Advertisement
Guest User

Netgear

a guest
Apr 19th, 2018
76
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.88 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:~# dmesg
  2. [ 0.000000] Linux version 3.10.49 (bb@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r42625) ) #3 Wed Oct 1 14:00:51 CEST 2014
  3. [ 0.000000] MyLoader: sysp=f0b0f3d6, boardp=71e2ddf5, parts=6030f3d4
  4. [ 0.000000] bootconsole [early0] enabled
  5. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  6. [ 0.000000] SoC: Atheros AR7240 rev 2
  7. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000MHz
  8. [ 0.000000] Determined physical RAM map:
  9. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  10. [ 0.000000] Initrd not found or empty - disabling initrd
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  16. [ 0.000000] On node 0 totalpages: 8192
  17. [ 0.000000] free_area_init_node: node 0, pgdat 80334b60, node_mem_map 81000000
  18. [ 0.000000] Normal zone: 64 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  21. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  22. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  26. [ 0.000000] Kernel command line: board=WNR612V2 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd
  27. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 28588k/32768k available (2369k kernel code, 4180k reserved, 621k data, 272k init, 0k highmem)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS:51
  35. [ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  36. [ 0.080000] pid_max: default: 32768 minimum: 301
  37. [ 0.080000] Mount-cache hash table entries: 512
  38. [ 0.090000] NET: Registered protocol family 16
  39. [ 0.100000] MIPS: machine is NETGEAR WNR612 V2
  40. [ 0.100000] ar71xx: using random MAC address for eth0
  41. [ 0.500000] registering PCI controller with io_map_base unset
  42. [ 0.510000] bio: create slab <bio-0> at 0
  43. [ 0.520000] PCI host bridge to bus 0000:00
  44. [ 0.520000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  45. [ 0.530000] pci_bus 0000:00: root bus resource [io 0x0000]
  46. [ 0.530000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  47. [ 0.540000] pci 0000:00:00.0: [168c:002b] type 00 class 0x028000
  48. [ 0.540000] pci 0000:00:00.0: fixup device configuration
  49. [ 0.540000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x0000ffff 64bit]
  50. [ 0.540000] pci 0000:00:00.0: supports D1
  51. [ 0.540000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  52. [ 0.540000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  53. [ 0.540000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit]
  54. [ 0.550000] pci 0000:00:00.0: using irq 40 for pin 1
  55. [ 0.550000] Switching to clocksource MIPS
  56. [ 0.560000] NET: Registered protocol family 2
  57. [ 0.560000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  58. [ 0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  59. [ 0.580000] TCP: Hash tables configured (established 512 bind 512)
  60. [ 0.580000] TCP: reno registered
  61. [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  62. [ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  63. [ 0.600000] NET: Registered protocol family 1
  64. [ 0.600000] PCI: CLS 0 bytes, default 32
  65. [ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  66. [ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  67. [ 0.640000] msgmni has been set to 55
  68. [ 0.650000] io scheduler noop registered
  69. [ 0.650000] io scheduler deadline registered (default)
  70. [ 0.660000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  71. [ 0.690000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
  72. [ 0.700000] console [ttyS0] enabled, bootconsole disabled
  73. [ 0.710000] ath79-spi ath79-spi: master is unqueued, this is deprecated
  74. [ 0.720000] m25p80 spi0.0: found mx25l3205d, expected m25p80
  75. [ 0.720000] m25p80 spi0.0: mx25l3205d (4096 Kbytes)
  76. [ 0.730000] 4 cmdlinepart partitions found on MTD device spi0.0
  77. [ 0.740000] Creating 4 MTD partitions on "spi0.0":
  78. [ 0.740000] 0x000000000000-0x000000040000 : "u-boot"
  79. [ 0.750000] 0x000000040000-0x000000050000 : "u-boot-env"
  80. [ 0.750000] 0x000000050000-0x0000003f0000 : "firmware"
  81. [ 0.760000] 2 netgear-fw partitions found on MTD device firmware
  82. [ 0.770000] 0x000000050000-0x000000162440 : "kernel"
  83. [ 0.770000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  84. [ 0.790000] 0x000000162440-0x0000003f0000 : "rootfs"
  85. [ 0.790000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  86. [ 0.810000] mtd: device 4 (rootfs) set to be root filesystem
  87. [ 0.810000] 1 squashfs-split partitions found on MTD device rootfs
  88. [ 0.820000] 0x000000390000-0x0000003f0000 : "rootfs_data"
  89. [ 0.830000] 0x0000003f0000-0x000000400000 : "art"
  90. [ 0.940000] libphy: ag71xx_mdio: probed
  91. [ 1.520000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Generic PHY]
  92. [ 1.530000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
  93. [ 2.100000] ag71xx-mdio.0: Found an AR7240/AR9330 built-in switch
  94. [ 3.130000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
  95. [ 3.130000] TCP: cubic registered
  96. [ 3.140000] NET: Registered protocol family 17
  97. [ 3.140000] Bridge firewalling registered
  98. [ 3.150000] 8021q: 802.1Q VLAN Support v1.8
  99. [ 3.160000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  100. [ 3.170000] Freeing unused kernel memory: 272K (8034c000 - 80390000)
  101. [ 6.060000] usbcore: registered new interface driver usbfs
  102. [ 6.070000] usbcore: registered new interface driver hub
  103. [ 6.070000] usbcore: registered new device driver usb
  104. [ 6.080000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  105. [ 6.090000] ehci-platform: EHCI generic platform driver
  106. [ 6.100000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  107. [ 8.680000] eth1: link up (1000Mbps/Full duplex)
  108. [ 10.890000] jffs2: notice: (318) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 17 of xref (0 dead, 3 orphan) found.
  109. [ 10.930000] eth1: link down
  110. [ 12.550000] NET: Registered protocol family 10
  111. [ 12.570000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
  112. [ 12.580000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  113. [ 12.600000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
  114. [ 12.610000] Backport generated by backports.git backports-20140320-37-g5c33da0
  115. [ 12.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
  116. [ 12.680000] xt_time: kernel timezone is -0000
  117. [ 12.710000] cfg80211: Calling CRDA to update world regulatory domain
  118. [ 12.710000] cfg80211: World regulatory domain updated:
  119. [ 12.720000] cfg80211: DFS Master region: unset
  120. [ 12.720000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  121. [ 12.730000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  122. [ 12.740000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  123. [ 12.750000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  124. [ 12.760000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
  125. [ 12.760000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  126. [ 12.770000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  127. [ 12.780000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  128. [ 12.790000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  129. [ 12.860000] PPP generic driver version 2.4.2
  130. [ 12.880000] NET: Registered protocol family 24
  131. [ 12.930000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  132. [ 12.950000] ath: phy0: Enable LNA combining
  133. [ 12.950000] ath: EEPROM regdomain: 0x0
  134. [ 12.950000] ath: EEPROM indicates default country code should be used
  135. [ 12.950000] ath: doing EEPROM country->regdmn map search
  136. [ 12.950000] ath: country maps to regdmn code: 0x3a
  137. [ 12.950000] ath: Country alpha2 being used: US
  138. [ 12.950000] ath: Regpair used: 0x3a
  139. [ 12.970000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  140. [ 12.980000] cfg80211: Calling CRDA for country: US
  141. [ 12.990000] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40
  142. [ 13.000000] cfg80211: Regulatory domain changed to country: US
  143. [ 13.000000] cfg80211: DFS Master region: FCC
  144. [ 13.010000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  145. [ 13.020000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  146. [ 13.020000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
  147. [ 13.030000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
  148. [ 13.040000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  149. [ 13.050000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  150. [ 24.620000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  151. [ 24.620000] device eth1 entered promiscuous mode
  152. [ 24.630000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  153. [ 24.650000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  154. [ 25.720000] eth1: link up (1000Mbps/Full duplex)
  155. [ 25.720000] br-lan: port 1(eth1) entered forwarding state
  156. [ 25.730000] br-lan: port 1(eth1) entered forwarding state
  157. [ 25.730000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  158. [ 25.760000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  159. [ 26.380000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  160. [ 26.400000] device wlan0 entered promiscuous mode
  161. [ 26.400000] br-lan: port 2(wlan0) entered forwarding state
  162. [ 26.410000] br-lan: port 2(wlan0) entered forwarding state
  163. [ 26.440000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  164. [ 27.730000] br-lan: port 1(eth1) entered forwarding state
  165. [ 28.410000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!