API tools faq
paste
Guest User

Untitled

a guest
Nov 24th, 2025
93
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.24 KB | None | 0 0
raw download clone embed print report
  1. root@pve1:~# smartctl -a /dev/sde
  2. smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.17.2-1-pve] (local build)
  3. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: ST4000VN006-3CW104
  7. Serial Number: ZW63AGCC
  8. LU WWN Device Id: 5 000c50 0ea21a33e
  9. Firmware Version: SC60
  10. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 3.5 inches
  14. Device is: Not in smartctl database 7.3/5528
  15. ATA Version is: ACS-3 T13/2161-D revision 5
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is: Mon Nov 24 21:55:33 2025 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 0) seconds.
  33. Offline data collection
  34. capabilities: (0x73) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. No Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 463) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x70bd) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 078 065 006 Pre-fail Always - 68612736
  62. 3 Spin_Up_Time 0x0003 098 095 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 156
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000f 069 060 045 Pre-fail Always - 8811339
  66. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 167
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94
  69. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  70. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  71. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  72. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  73. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  74. 190 Airflow_Temperature_Cel 0x0022 067 058 040 Old_age Always - 33 (Min/Max 33/33)
  75. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  76. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 84
  77. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 907
  78. 194 Temperature_Celsius 0x0022 033 042 000 Old_age Always - 33 (0 25 0 0 0)
  79. 195 Hardware_ECC_Recovered 0x001a 078 065 000 Old_age Always - 68612736
  80. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  81. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  82. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  83. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 116 (59 110 0)
  84. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 25516380942
  85. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1850008576
  86.  
  87. SMART Error Log Version: 1
  88. No Errors Logged
  89.  
  90. SMART Self-test log structure revision number 1
  91. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  92. # 1 Short offline Completed without error 00% 144 -
  93. # 2 Short offline Completed without error 00% 0 -
  94.  
  95. SMART Selective self-test log data structure revision number 1
  96. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  97. 1 0 0 Not_testing
  98. 2 0 0 Not_testing
  99. 3 0 0 Not_testing
  100. 4 0 0 Not_testing
  101. 5 0 0 Not_testing
  102. Selective self-test flags (0x0):
  103. After scanning selected spans, do NOT read-scan remainder of disk.
  104. If Selective self-test is pending on power-up, resume after 0 minute delay.
  105.  
  106. The above only provides legacy SMART information - try 'smartctl -x' for more
  107.  
  108. root@pve1:~#
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!