Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- I/RIL ( 1011): Opening tty device /dev/ttyspi0
- D/RIL ( 1011): mainLoop 1. Current errno: Unknown error: 0
- D/RIL ( 1011): lge-ril: main loop routine start
- D/RIL ( 1011): mainLoop 2. Current errno: Unknown error: 0
- D/RIL ( 1011): mainLoop 3. Current errno: Unknown error: 0
- E/RIL ( 1011): fd of /dev/ttyspi0 is 12
- D/RIL ( 1011): mainLoop 3. Current errno: Unknown error: 0
- D/RIL ( 1011): mainLoop 3.1 Current errno: Unknown error: 0
- D/RIL ( 1011): mainLoop 3.2 Current errno: Unknown error: 0
- D/RIL ( 1011): mainLoop 3.3 Current errno: Unknown error: 0, err:0
- D/RIL ( 1011): lge-ril: Device path = /dev/ttyspi0
- D/RIL ( 1011): end of if ( fd > 0 )...
- D/RIL ( 1011): mainLoop 6. Current errno: Unknown error: 0
- D/RIL ( 1011): end of if (s_device_path != NULL)...
- D/RIL ( 1011): end of while (fd < 0)...
- D/RIL ( 1011): mainLoop 7.Current errno: Unknown error: 0
- D/RIL ( 1011): ainLoop: RAT is set to WCDMA
- D/RIL ( 1011): lge_ril: RIL_STATE_NEEDS_INITIALIZATION
- D/RIL ( 1011): initializeVendorRIL START
- D/RIL ( 1011): initializeVendorRIL: product RAT = 1
- D/RIL ( 1011): lge_ril: RIL_STATE_INITIALIZATION
- D/RIL ( 1011): initializeVendorRIL: USE_ONE_DLC NOT DEFINED
- D/RIL ( 1011): lge-ril: mainLoop: Opening DLC devices...
- D/RIL ( 1011): Device is opened (dlc:1, pts:/dev/pts1, fd:13)
- D/RIL ( 1011): Device is opened (dlc:2, pts:/dev/pts2, fd:14)
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts3 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts4 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts5 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts6 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts7 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts8 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts9 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts10 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts11 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts12 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): Device is opened (dlc:13, pts:/dev/pts13, fd:15)
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts14 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts15 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts16 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts17 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts18 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts19 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): Device is opened (dlc:20, pts:/dev/pts20, fd:16)
- D/RIL ( 1011): Device is opened (dlc:22, pts:/dev/pts22, fd:18)
- D/RIL ( 1011): Device is opened (dlc:24, pts:/dev/pts24, fd:20)
- D/RIL ( 1011): Device is opened (dlc:26, pts:/dev/pts26, fd:22)
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts28 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts29 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts30 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: openDLCDevices: /dev/pts31 is not configured in device table and not Data channel. Ignoring.
- D/RIL ( 1011): lge-ril: mainLoop: Opening DLC devices end; allDevicesOpened = 0
- D/RIL ( 1011): lge-ril: using static DLC mapping
- D/RIL ( 1011): lge-ril: opening at channels start
- D/RIL ( 1011): lge-ril: MAX_DLC_CHANNELS_DATA = 7
- D/RIL ( 1011): lge-ril: opening at channels end
- D/RIL ( 1011): Current errno: Try again
- D/RIL ( 1011): initializeVendorRIL END
- D/AT ( 1011): AT[2]< $RSSI: 14, 255
- D/AT ( 1017): AT> ATE0Q0V1
- D/AT ( 1017): AT< ATE0Q0V1
- D/AT ( 1017): AT< OK
- D/AT ( 1017): AT> ATE0Q0V1
- D/AT ( 1017): AT< OK
- D/AT ( 1017): AT> ATS0=0
- D/AT ( 1017): AT< ERROR
- D/AT ( 1017): AT> AT+CMEE=1
- D/AT ( 1017): AT< OK
- D/AT ( 1017): AT> AT+CFUN?
- D/AT ( 1017): AT< +CFUN: 1
- D/AT ( 1017): AT< OK
- D/AT ( 1011): AT[2]< $RSSI: 15, 255
- D/RIL ( 1011): setRadioState 1. Current errno: Bad file number
- D/RILC ( 1011): [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED {RADIO_OFF}
- D/RIL ( 1011): setRadioState 2. Current errno: Bad file number
- D/RIL ( 1011): setRadioState 5. Current errno: Unknown error: 0
- D/RIL ( 1011): initializeCallback 1.Current errno: Unknown error: 0
- D/RIL ( 1011): lge-ril: initializeCallback start
- D/RIL ( 1011): Init Loop .Current errno: Unknown error: 0
- D/RIL ( 1011): lge-ril: Initialization of DLC 1 START
- D/RIL ( 1011): lge-ril: product RAT = 1
- D/AT ( 1011): AT[1]> ATE0Q0V1
- D/AT ( 1011): AT[1]< OK
- D/AT ( 1011): AT[1]> ATE0Q0V1
- D/AT ( 1011): AT[1]< OK
- D/AT ( 1011): AT[1]> ATS0=0
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CMEE=1
- D/AT ( 1011): AT[1]< OK
- D/AT ( 1011): AT[1]> AT+CREG=2
- D/AT ( 1011): AT[1]< ERROR
- D/RIL ( 1011): initializeCallbackRoutine - CREG p_response success = 0
- D/RIL ( 1011): initializeCallbackRoutine - CREG p_response finalResponse= ERROR
- D/RIL ( 1011): initializeCallbackRoutine - response is ERROR, g_internalReconf = 1
- D/AT ( 1011): AT[1]> AT+CREG=1
- D/AT ( 1011): AT[1]< ERROR
- D/RIL ( 1011): Before request BD Address
- D/RIL ( 1011): Start to send AT Command
- D/AT ( 1011): AT[1]> AT+BDADDR
- D/AT ( 1011): AT[1]< +BDADDR:74A722BF53EE
- D/AT ( 1011): AT[1]< OK
- D/RIL ( 1011): +BDADDR:74A722BF53EE
- D/RIL ( 1011): BDAddr: +BDADDR:74A722BF53EE
- D/RIL ( 1011): BDAddr2: 74A722BF53EE
- D/RIL ( 1011): /bdaddr_if sysfs was successfully opened and now will be closed
- D/RIL ( 1011): Before request BD Address
- D/RIL ( 1011): Start to send AT Command
- D/AT ( 1011): AT[1]> AT+WIFIADDR
- D/AT ( 1011): AT[1]< FFFFFFFFFFFF
- D/RIL ( 1011): GprsEngineeringInfoIntermediate
- D/AT ( 1011): AT[1]< OK
- E/RIL ( 1011): request BD Address error
- D/AT ( 1011): AT[1]> AT+XMER=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CRC=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CNAP=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CR=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CGREG=2
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CCWA=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CMOD=0
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CSSN=1,1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+COLP=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CSCS="UCS2"
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CUSD=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CGEREP=1,0
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CMGF=0
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CTZU=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CSDH=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CPMS="SM","SM","SM"
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+XNOTIFYDUNSTATUS=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+XCALLSTAT=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CSMS=1
- D/AT ( 1011): AT[1]< ERROR
- D/AT ( 1011): AT[1]> AT+CNMI=1,2,2,1,0
- D/AT ( 1011): AT[1]< ERROR
- D/RIL ( 1011): initializeCallbackRoutine - CNMI p_response success = 0
- D/RIL ( 1011): initializeCallbackRoutine - CNMI p_response finalResponse= ERROR
- D/RIL ( 1011): initializeCallbackRoutine - response is ERROR, g_internalReconf = 2
- D/RIL ( 1011): lge-ril: Initialization of DLC 1 END
- D/RIL ( 1011): Init Loop .Current errno: Unknown error: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement