API tools faq
paste
Advertisement
bshurilla

Hictop Marlin Configuration.h

bshurilla
Jan 20th, 2021 (edited)
448
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 90.41 KB | None | 0 0
raw download clone embed print report
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <https://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23.  
  24. /**
  25. * Configuration.h
  26. *
  27. * Basic settings such as:
  28. *
  29. * - Type of electronics
  30. * - Type of temperature sensor
  31. * - Printer geometry
  32. * - Endstop configuration
  33. * - LCD controller
  34. * - Extra features
  35. *
  36. * Advanced settings can be found in Configuration_adv.h
  37. */
  38. #define CONFIGURATION_H_VERSION 020007
  39.  
  40. //===========================================================================
  41. //============================= Getting Started =============================
  42. //===========================================================================
  43.  
  44. /**
  45. * Here are some standard links for getting your machine calibrated:
  46. *
  47. * https://reprap.org/wiki/Calibration
  48. * https://youtu.be/wAL9d7FgInk
  49. * http://calculator.josefprusa.cz
  50. * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  51. * https://www.thingiverse.com/thing:5573
  52. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  53. * https://www.thingiverse.com/thing:298812
  54. */
  55.  
  56. //===========================================================================
  57. //============================= DELTA Printer ===============================
  58. //===========================================================================
  59. // For a Delta printer start with one of the configuration files in the
  60. // config/examples/delta directory and customize for your machine.
  61. //
  62.  
  63. //===========================================================================
  64. //============================= SCARA Printer ===============================
  65. //===========================================================================
  66. // For a SCARA printer start with the configuration files in
  67. // config/examples/SCARA and customize for your machine.
  68. //
  69.  
  70. // @section info
  71.  
  72. // Author info of this build printed to the host during boot and M115
  73. #define STRING_CONFIG_H_AUTHOR "*******" // Who made the changes.
  74. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
  75.  
  76. /**
  77. * *** VENDORS PLEASE READ ***
  78. *
  79. * Marlin allows you to add a custom boot image for Graphical LCDs.
  80. * With this option Marlin will first show your custom screen followed
  81. * by the standard Marlin logo with version number and web URL.
  82. *
  83. * We encourage you to take advantage of this new feature and we also
  84. * respectfully request that you retain the unmodified Marlin boot screen.
  85. */
  86.  
  87. // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
  88. #define SHOW_BOOTSCREEN
  89.  
  90. // Show the bitmap in Marlin/_Bootscreen.h on startup.
  91. //#define SHOW_CUSTOM_BOOTSCREEN
  92.  
  93. // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
  94. //#define CUSTOM_STATUS_SCREEN_IMAGE
  95.  
  96. // @section machine
  97.  
  98. /**
  99. * Select the serial port on the board to use for communication with the host.
  100. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  101. * Serial port -1 is the USB emulated serial port, if available.
  102. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  103. *
  104. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  105. */
  106. #define SERIAL_PORT -1
  107.  
  108. /**
  109. * Select a secondary serial port on the board to use for communication with the host.
  110. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  111. */
  112. //#define SERIAL_PORT_2 -1
  113.  
  114. /**
  115. * This setting determines the communication speed of the printer.
  116. *
  117. * 250000 works in most cases, but you might try a lower speed if
  118. * you commonly experience drop-outs during host printing.
  119. * You may try up to 1000000 to speed up SD file transfer.
  120. *
  121. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  122. */
  123. #define BAUDRATE 250000
  124.  
  125. // Enable the Bluetooth serial interface on AT90USB devices
  126. //#define BLUETOOTH
  127.  
  128. // Choose the name from boards.h that matches your setup
  129. #ifndef MOTHERBOARD
  130. #define MOTHERBOARD BOARD_BTT_SKR_V1_3
  131. #endif
  132.  
  133. // Name displayed in the LCD "Ready" message and Info menu
  134. #define CUSTOM_MACHINE_NAME "3D Printer"
  135.  
  136. // Printer's unique ID, used by some programs to differentiate between machines.
  137. // Choose your own or use a service like https://www.uuidgenerator.net/version4
  138. //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
  139.  
  140. // @section extruder
  141.  
  142. // This defines the number of extruders
  143. // :[0, 1, 2, 3, 4, 5, 6, 7, 8]
  144. #define EXTRUDERS 1
  145.  
  146. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  147. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  148.  
  149. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  150. //#define SINGLENOZZLE
  151.  
  152. // Save and restore temperature and fan speed on tool-change.
  153. // Set standby for the unselected tool with M104/106/109 T...
  154. #if ENABLED(SINGLENOZZLE)
  155. //#define SINGLENOZZLE_STANDBY_TEMP
  156. //#define SINGLENOZZLE_STANDBY_FAN
  157. #endif
  158.  
  159. /**
  160. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  161. *
  162. * This device allows one stepper driver on a control board to drive
  163. * two to eight stepper motors, one at a time, in a manner suitable
  164. * for extruders.
  165. *
  166. * This option only allows the multiplexer to switch on tool-change.
  167. * Additional options to configure custom E moves are pending.
  168. */
  169. //#define MK2_MULTIPLEXER
  170. #if ENABLED(MK2_MULTIPLEXER)
  171. // Override the default DIO selector pins here, if needed.
  172. // Some pins files may provide defaults for these pins.
  173. //#define E_MUX0_PIN 40 // Always Required
  174. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  175. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  176. #endif
  177.  
  178. /**
  179. * Průša Multi-Material Unit v2
  180. *
  181. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  182. * Requires EXTRUDERS = 5
  183. *
  184. * For additional configuration see Configuration_adv.h
  185. */
  186. //#define PRUSA_MMU2
  187.  
  188. // A dual extruder that uses a single stepper motor
  189. //#define SWITCHING_EXTRUDER
  190. #if ENABLED(SWITCHING_EXTRUDER)
  191. #define SWITCHING_EXTRUDER_SERVO_NR 0
  192. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  193. #if EXTRUDERS > 3
  194. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  195. #endif
  196. #endif
  197.  
  198. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  199. //#define SWITCHING_NOZZLE
  200. #if ENABLED(SWITCHING_NOZZLE)
  201. #define SWITCHING_NOZZLE_SERVO_NR 0
  202. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  203. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  204. #endif
  205.  
  206. /**
  207. * Two separate X-carriages with extruders that connect to a moving part
  208. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  209. */
  210. //#define PARKING_EXTRUDER
  211.  
  212. /**
  213. * Two separate X-carriages with extruders that connect to a moving part
  214. * via a magnetic docking mechanism using movements and no solenoid
  215. *
  216. * project : https://www.thingiverse.com/thing:3080893
  217. * movements : https://youtu.be/0xCEiG9VS3k
  218. * https://youtu.be/Bqbcs0CU2FE
  219. */
  220. //#define MAGNETIC_PARKING_EXTRUDER
  221.  
  222. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  223.  
  224. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  225. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  226. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  227.  
  228. #if ENABLED(PARKING_EXTRUDER)
  229.  
  230. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  231. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  232. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  233. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  234.  
  235. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  236.  
  237. #define MPE_FAST_SPEED 9000 // (mm/min) Speed for travel before last distance point
  238. #define MPE_SLOW_SPEED 4500 // (mm/min) Speed for last distance travel to park and couple
  239. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  240. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  241.  
  242. #endif
  243.  
  244. #endif
  245.  
  246. /**
  247. * Switching Toolhead
  248. *
  249. * Support for swappable and dockable toolheads, such as
  250. * the E3D Tool Changer. Toolheads are locked with a servo.
  251. */
  252. //#define SWITCHING_TOOLHEAD
  253.  
  254. /**
  255. * Magnetic Switching Toolhead
  256. *
  257. * Support swappable and dockable toolheads with a magnetic
  258. * docking mechanism using movement and no servo.
  259. */
  260. //#define MAGNETIC_SWITCHING_TOOLHEAD
  261.  
  262. /**
  263. * Electromagnetic Switching Toolhead
  264. *
  265. * Parking for CoreXY / HBot kinematics.
  266. * Toolheads are parked at one edge and held with an electromagnet.
  267. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  268. */
  269. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  270.  
  271. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  272. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  273. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  274. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  275. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  276. #if ENABLED(SWITCHING_TOOLHEAD)
  277. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  278. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  279. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  280. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  281. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  282. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  283. #if ENABLED(PRIME_BEFORE_REMOVE)
  284. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  285. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  286. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/min) Extruder prime feedrate
  287. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/min) Extruder retract feedrate
  288. #endif
  289. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  290. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  291. #endif
  292. #endif
  293.  
  294. /**
  295. * "Mixing Extruder"
  296. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  297. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  298. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  299. * - This implementation supports up to two mixing extruders.
  300. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  301. */
  302. //#define MIXING_EXTRUDER
  303. #if ENABLED(MIXING_EXTRUDER)
  304. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  305. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  306. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  307. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  308. #if ENABLED(GRADIENT_MIX)
  309. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  310. #endif
  311. #endif
  312.  
  313. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  314. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  315. // For the other hotends it is their distance from the extruder 0 hotend.
  316. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  317. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  318. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  319.  
  320. // @section machine
  321.  
  322. /**
  323. * Power Supply Control
  324. *
  325. * Enable and connect the power supply to the PS_ON_PIN.
  326. * Specify whether the power supply is active HIGH or active LOW.
  327. */
  328. //#define PSU_CONTROL
  329. //#define PSU_NAME "Power Supply"
  330.  
  331. #if ENABLED(PSU_CONTROL)
  332. #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box
  333.  
  334. //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80
  335. //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power
  336.  
  337. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  338. #if ENABLED(AUTO_POWER_CONTROL)
  339. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  340. #define AUTO_POWER_E_FANS
  341. #define AUTO_POWER_CONTROLLERFAN
  342. #define AUTO_POWER_CHAMBER_FAN
  343. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  344. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  345. #define POWER_TIMEOUT 30
  346. #endif
  347. #endif
  348.  
  349. //===========================================================================
  350. //============================= Thermal Settings ============================
  351. //===========================================================================
  352. // @section temperature
  353.  
  354. /**
  355. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  356. *
  357. * Temperature sensors available:
  358. *
  359. * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1)
  360. * -3 : thermocouple with MAX31855 (only for sensors 0-1)
  361. * -2 : thermocouple with MAX6675 (only for sensors 0-1)
  362. * -4 : thermocouple with AD8495
  363. * -1 : thermocouple with AD595
  364. * 0 : not used
  365. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  366. * 331 : (3.3V scaled thermistor 1 table for MEGA)
  367. * 332 : (3.3V scaled thermistor 1 table for DUE)
  368. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  369. * 202 : 200k thermistor - Copymaster 3D
  370. * 3 : Mendel-parts thermistor (4.7k pullup)
  371. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  372. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan, J-Head, and E3D) (4.7k pullup)
  373. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  374. * 502 : 100K Zonestar Thermistor used by hot bed in Zonestar Průša P802M
  375. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  376. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  377. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  378. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  379. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  380. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  381. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  382. * 11 : 100k beta 3950 1% thermistor (Used in Keenovo AC silicone mats and most Wanhao i3 machines) (4.7k pullup)
  383. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  384. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  385. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  386. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  387. * 20 : Pt100 with circuit in the Ultimainboard V2.x with 5v excitation (AVR)
  388. * 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
  389. * 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB)
  390. * 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB)
  391. * 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)
  392. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  393. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  394. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  395. * 66 : 4.7M High Temperature thermistor from Dyze Design
  396. * 67 : 450C thermistor from SliceEngineering
  397. * 70 : the 100K thermistor found in the bq Hephestos 2
  398. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  399. * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines)
  400. *
  401. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  402. * (but gives greater accuracy and more stable PID)
  403. * 51 : 100k thermistor - EPCOS (1k pullup)
  404. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  405. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  406. *
  407. * 1047 : Pt1000 with 4k7 pullup (E3D)
  408. * 1010 : Pt1000 with 1k pullup (non standard)
  409. * 147 : Pt100 with 4k7 pullup
  410. * 110 : Pt100 with 1k pullup (non standard)
  411. *
  412. * 1000 : Custom - Specify parameters in Configuration_adv.h
  413. *
  414. * Use these for Testing or Development purposes. NEVER for production machine.
  415. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  416. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  417. */
  418. #define TEMP_SENSOR_0 3
  419. #define TEMP_SENSOR_1 0
  420. #define TEMP_SENSOR_2 0
  421. #define TEMP_SENSOR_3 0
  422. #define TEMP_SENSOR_4 0
  423. #define TEMP_SENSOR_5 0
  424. #define TEMP_SENSOR_6 0
  425. #define TEMP_SENSOR_7 0
  426. #define TEMP_SENSOR_BED 3
  427. #define TEMP_SENSOR_PROBE 0
  428. #define TEMP_SENSOR_CHAMBER 0
  429.  
  430. // Dummy thermistor constant temperature readings, for use with 998 and 999
  431. #define DUMMY_THERMISTOR_998_VALUE 25
  432. #define DUMMY_THERMISTOR_999_VALUE 100
  433.  
  434. // Resistor values when using a MAX31865 (sensor -5)
  435. // Sensor value is typically 100 (PT100) or 1000 (PT1000)
  436. // Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
  437. //#define MAX31865_SENSOR_OHMS 100
  438. //#define MAX31865_CALIBRATION_OHMS 430
  439.  
  440. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  441. // from the two sensors differ too much the print will be aborted.
  442. //#define TEMP_SENSOR_1_AS_REDUNDANT
  443. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  444.  
  445. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  446. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  447. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  448.  
  449. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  450. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  451. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  452.  
  453. // Below this temperature the heater will be switched off
  454. // because it probably indicates a broken thermistor wire.
  455. #define HEATER_0_MINTEMP 5
  456. #define HEATER_1_MINTEMP 5
  457. #define HEATER_2_MINTEMP 5
  458. #define HEATER_3_MINTEMP 5
  459. #define HEATER_4_MINTEMP 5
  460. #define HEATER_5_MINTEMP 5
  461. #define HEATER_6_MINTEMP 5
  462. #define HEATER_7_MINTEMP 5
  463. #define BED_MINTEMP 5
  464.  
  465. // Above this temperature the heater will be switched off.
  466. // This can protect components from overheating, but NOT from shorts and failures.
  467. // (Use MINTEMP for thermistor short/failure protection.)
  468. #define HEATER_0_MAXTEMP 275
  469. #define HEATER_1_MAXTEMP 275
  470. #define HEATER_2_MAXTEMP 275
  471. #define HEATER_3_MAXTEMP 275
  472. #define HEATER_4_MAXTEMP 275
  473. #define HEATER_5_MAXTEMP 275
  474. #define HEATER_6_MAXTEMP 275
  475. #define HEATER_7_MAXTEMP 275
  476. #define BED_MAXTEMP 150
  477.  
  478. //===========================================================================
  479. //============================= PID Settings ================================
  480. //===========================================================================
  481. // PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
  482.  
  483. // Comment the following line to disable PID and enable bang-bang.
  484. #define PIDTEMP
  485. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  486. #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  487. #define PID_K1 0.95 // Smoothing factor within any PID loop
  488.  
  489. #if ENABLED(PIDTEMP)
  490. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  491. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  492. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  493. // Set/get with gcode: M301 E[extruder number, 0-2]
  494.  
  495. #if ENABLED(PID_PARAMS_PER_HOTEND)
  496. // Specify between 1 and HOTENDS values per array.
  497. // If fewer than EXTRUDER values are provided, the last element will be repeated.
  498. #define DEFAULT_Kp_LIST { 22.20, 22.20 }
  499. #define DEFAULT_Ki_LIST { 1.08, 1.08 }
  500. #define DEFAULT_Kd_LIST { 114.00, 114.00 }
  501. #else
  502. #define DEFAULT_Kp 22.20
  503. #define DEFAULT_Ki 1.08
  504. #define DEFAULT_Kd 114.00
  505. #endif
  506. #endif // PIDTEMP
  507.  
  508. //===========================================================================
  509. //====================== PID > Bed Temperature Control ======================
  510. //===========================================================================
  511.  
  512. /**
  513. * PID Bed Heating
  514. *
  515. * If this option is enabled set PID constants below.
  516. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  517. *
  518. * The PID frequency will be the same as the extruder PWM.
  519. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  520. * which is fine for driving a square wave into a resistive load and does not significantly
  521. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  522. * heater. If your configuration is significantly different than this and you don't understand
  523. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  524. */
  525. //#define PIDTEMPBED
  526.  
  527. //#define BED_LIMIT_SWITCHING
  528.  
  529. /**
  530. * Max Bed Power
  531. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  532. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  533. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  534. */
  535. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  536.  
  537. #if ENABLED(PIDTEMPBED)
  538. //#define MIN_BED_POWER 0
  539. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  540.  
  541. // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  542. // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  543. #define DEFAULT_bedKp 10.00
  544. #define DEFAULT_bedKi .023
  545. #define DEFAULT_bedKd 305.4
  546.  
  547. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  548. #endif // PIDTEMPBED
  549.  
  550. #if EITHER(PIDTEMP, PIDTEMPBED)
  551. //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
  552. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  553. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  554. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  555. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  556. #endif
  557.  
  558. // @section extruder
  559.  
  560. /**
  561. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  562. * Add M302 to set the minimum extrusion temperature and/or turn
  563. * cold extrusion prevention on and off.
  564. *
  565. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  566. */
  567. #define PREVENT_COLD_EXTRUSION
  568. #define EXTRUDE_MINTEMP 170
  569.  
  570. /**
  571. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  572. * Note: For Bowden Extruders make this large enough to allow load/unload.
  573. */
  574. #define PREVENT_LENGTHY_EXTRUDE
  575. #define EXTRUDE_MAXLENGTH 200
  576.  
  577. //===========================================================================
  578. //======================== Thermal Runaway Protection =======================
  579. //===========================================================================
  580.  
  581. /**
  582. * Thermal Protection provides additional protection to your printer from damage
  583. * and fire. Marlin always includes safe min and max temperature ranges which
  584. * protect against a broken or disconnected thermistor wire.
  585. *
  586. * The issue: If a thermistor falls out, it will report the much lower
  587. * temperature of the air in the room, and the the firmware will keep
  588. * the heater on.
  589. *
  590. * If you get "Thermal Runaway" or "Heating failed" errors the
  591. * details can be tuned in Configuration_adv.h
  592. */
  593.  
  594. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  595. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  596. #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  597.  
  598. //===========================================================================
  599. //============================= Mechanical Settings =========================
  600. //===========================================================================
  601.  
  602. // @section machine
  603.  
  604. // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
  605. // either in the usual order or reversed
  606. //#define COREXY
  607. //#define COREXZ
  608. //#define COREYZ
  609. //#define COREYX
  610. //#define COREZX
  611. //#define COREZY
  612. //#define MARKFORGED_XY // MarkForged. See https://reprap.org/forum/read.php?152,504042
  613.  
  614. //===========================================================================
  615. //============================== Endstop Settings ===========================
  616. //===========================================================================
  617.  
  618. // @section homing
  619.  
  620. // Specify here all the endstop connectors that are connected to any endstop or probe.
  621. // Almost all printers will be using one per axis. Probes will use one or more of the
  622. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  623. #define USE_XMIN_PLUG
  624. #define USE_YMIN_PLUG
  625. #define USE_ZMIN_PLUG
  626. //#define USE_XMAX_PLUG
  627. //#define USE_YMAX_PLUG
  628. //#define USE_ZMAX_PLUG
  629.  
  630. // Enable pullup for all endstops to prevent a floating state
  631. #define ENDSTOPPULLUPS
  632. #if DISABLED(ENDSTOPPULLUPS)
  633. // Disable ENDSTOPPULLUPS to set pullups individually
  634. //#define ENDSTOPPULLUP_XMAX
  635. //#define ENDSTOPPULLUP_YMAX
  636. //#define ENDSTOPPULLUP_ZMAX
  637. //#define ENDSTOPPULLUP_XMIN
  638. //#define ENDSTOPPULLUP_YMIN
  639. //#define ENDSTOPPULLUP_ZMIN
  640. //#define ENDSTOPPULLUP_ZMIN_PROBE
  641. #endif
  642.  
  643. // Enable pulldown for all endstops to prevent a floating state
  644. //#define ENDSTOPPULLDOWNS
  645. #if DISABLED(ENDSTOPPULLDOWNS)
  646. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  647. //#define ENDSTOPPULLDOWN_XMAX
  648. //#define ENDSTOPPULLDOWN_YMAX
  649. //#define ENDSTOPPULLDOWN_ZMAX
  650. //#define ENDSTOPPULLDOWN_XMIN
  651. //#define ENDSTOPPULLDOWN_YMIN
  652. //#define ENDSTOPPULLDOWN_ZMIN
  653. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  654. #endif
  655.  
  656. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  657. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  658. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  659. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  660. #define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  661. #define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  662. #define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  663. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
  664.  
  665. /**
  666. * Stepper Drivers
  667. *
  668. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  669. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  670. *
  671. * A4988 is assumed for unspecified drivers.
  672. *
  673. * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01,
  674. * TB6560, TB6600, TMC2100,
  675. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  676. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  677. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  678. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  679. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  680. */
  681. #define X_DRIVER_TYPE TMC2208
  682. #define Y_DRIVER_TYPE TMC2208
  683. #define Z_DRIVER_TYPE TMC2208
  684. //#define X2_DRIVER_TYPE A4988
  685. //#define Y2_DRIVER_TYPE A4988
  686. //#define Z2_DRIVER_TYPE A4988
  687. //#define Z3_DRIVER_TYPE A4988
  688. //#define Z4_DRIVER_TYPE A4988
  689. #define E0_DRIVER_TYPE TMC2208
  690. //#define E1_DRIVER_TYPE A4988
  691. //#define E2_DRIVER_TYPE A4988
  692. //#define E3_DRIVER_TYPE A4988
  693. //#define E4_DRIVER_TYPE A4988
  694. //#define E5_DRIVER_TYPE A4988
  695. //#define E6_DRIVER_TYPE A4988
  696. //#define E7_DRIVER_TYPE A4988
  697.  
  698. // Enable this feature if all enabled endstop pins are interrupt-capable.
  699. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  700. //#define ENDSTOP_INTERRUPTS_FEATURE
  701.  
  702. /**
  703. * Endstop Noise Threshold
  704. *
  705. * Enable if your probe or endstops falsely trigger due to noise.
  706. *
  707. * - Higher values may affect repeatability or accuracy of some bed probes.
  708. * - To fix noise install a 100nF ceramic capacitor in parallel with the switch.
  709. * - This feature is not required for common micro-switches mounted on PCBs
  710. * based on the Makerbot design, which already have the 100nF capacitor.
  711. *
  712. * :[2,3,4,5,6,7]
  713. */
  714. //#define ENDSTOP_NOISE_THRESHOLD 2
  715.  
  716. // Check for stuck or disconnected endstops during homing moves.
  717. //#define DETECT_BROKEN_ENDSTOP
  718.  
  719. //=============================================================================
  720. //============================== Movement Settings ============================
  721. //=============================================================================
  722. // @section motion
  723.  
  724. /**
  725. * Default Settings
  726. *
  727. * These settings can be reset by M502
  728. *
  729. * Note that if EEPROM is enabled, saved values will override these.
  730. */
  731.  
  732. /**
  733. * With this option each E stepper can have its own factors for the
  734. * following movement settings. If fewer factors are given than the
  735. * total number of extruders, the last value applies to the rest.
  736. */
  737. //#define DISTINCT_E_FACTORS
  738.  
  739. /**
  740. * Default Axis Steps Per Unit (steps/mm)
  741. * Override with M92
  742. * X, Y, Z, E0 [, E1[, E2...]]
  743. */
  744. #define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,398,94.4962144}
  745.  
  746. /**
  747. * Default Max Feed Rate (mm/s)
  748. * Override with M203
  749. * X, Y, Z, E0 [, E1[, E2...]]
  750. */
  751. #define DEFAULT_MAX_FEEDRATE { 250, 250, 5, 25 }
  752.  
  753. //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
  754. #if ENABLED(LIMITED_MAX_FR_EDITING)
  755. #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
  756. #endif
  757.  
  758. /**
  759. * Default Max Acceleration (change/s) change = mm/s
  760. * (Maximum start speed for accelerated moves)
  761. * Override with M201
  762. * X, Y, Z, E0 [, E1[, E2...]]
  763. */
  764. #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
  765.  
  766. //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
  767. #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
  768. #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
  769. #endif
  770.  
  771. /**
  772. * Default Acceleration (change/s) change = mm/s
  773. * Override with M204
  774. *
  775. * M204 P Acceleration
  776. * M204 R Retract Acceleration
  777. * M204 T Travel Acceleration
  778. */
  779. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
  780. #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
  781. #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
  782.  
  783. /**
  784. * Default Jerk limits (mm/s)
  785. * Override with M205 X Y Z E
  786. *
  787. * "Jerk" specifies the minimum speed change that requires acceleration.
  788. * When changing speed and direction, if the difference is less than the
  789. * value set here, it may happen instantaneously.
  790. */
  791. //#define CLASSIC_JERK
  792. #if ENABLED(CLASSIC_JERK)
  793. #define DEFAULT_XJERK 10.0
  794. #define DEFAULT_YJERK 10.0
  795. #define DEFAULT_ZJERK 0.3
  796.  
  797. //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
  798.  
  799. //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
  800. #if ENABLED(LIMITED_JERK_EDITING)
  801. #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits
  802. #endif
  803. #endif
  804.  
  805. #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
  806.  
  807. /**
  808. * Junction Deviation Factor
  809. *
  810. * See:
  811. * https://reprap.org/forum/read.php?1,739819
  812. * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  813. */
  814. #if DISABLED(CLASSIC_JERK)
  815. #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
  816. #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
  817. // for small segments (< 1mm) with large junction angles (> 135°).
  818. #endif
  819.  
  820. /**
  821. * S-Curve Acceleration
  822. *
  823. * This option eliminates vibration during printing by fitting a Bézier
  824. * curve to move acceleration, producing much smoother direction changes.
  825. *
  826. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  827. */
  828. #define S_CURVE_ACCELERATION
  829.  
  830. //===========================================================================
  831. //============================= Z Probe Options =============================
  832. //===========================================================================
  833. // @section probes
  834.  
  835. //
  836. // See https://marlinfw.org/docs/configuration/probes.html
  837. //
  838.  
  839. /**
  840. * Enable this option for a probe connected to the Z-MIN pin.
  841. * The probe replaces the Z-MIN endstop and is used for Z homing.
  842. * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  843. */
  844. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  845.  
  846. // Force the use of the probe for Z-axis homing
  847. //#define USE_PROBE_FOR_Z_HOMING
  848.  
  849. /**
  850. * Z_MIN_PROBE_PIN
  851. *
  852. * Define this pin if the probe is not connected to Z_MIN_PIN.
  853. * If not defined the default pin for the selected MOTHERBOARD
  854. * will be used. Most of the time the default is what you want.
  855. *
  856. * - The simplest option is to use a free endstop connector.
  857. * - Use 5V for powered (usually inductive) sensors.
  858. *
  859. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  860. * - For simple switches connect...
  861. * - normally-closed switches to GND and D32.
  862. * - normally-open switches to 5V and D32.
  863. */
  864. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  865.  
  866. /**
  867. * Probe Type
  868. *
  869. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  870. * Activate one of these to use Auto Bed Leveling below.
  871. */
  872.  
  873. /**
  874. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  875. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  876. * or (with LCD_BED_LEVELING) the LCD controller.
  877. */
  878. //#define PROBE_MANUALLY
  879. //#define MANUAL_PROBE_START_Z 0.2
  880.  
  881. /**
  882. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  883. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  884. */
  885. #define FIX_MOUNTED_PROBE
  886.  
  887. /**
  888. * Use the nozzle as the probe, as with a conductive
  889. * nozzle system or a piezo-electric smart effector.
  890. */
  891. //#define NOZZLE_AS_PROBE
  892.  
  893. /**
  894. * Z Servo Probe, such as an endstop switch on a rotating arm.
  895. */
  896. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  897. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  898.  
  899. /**
  900. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  901. */
  902. //#define BLTOUCH
  903.  
  904. /**
  905. * Pressure sensor with a BLTouch-like interface
  906. */
  907. //#define CREALITY_TOUCH
  908.  
  909. /**
  910. * Touch-MI Probe by hotends.fr
  911. *
  912. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  913. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  914. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  915. *
  916. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  917. * and a minimum Z_HOMING_HEIGHT of 10.
  918. */
  919. //#define TOUCH_MI_PROBE
  920. #if ENABLED(TOUCH_MI_PROBE)
  921. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  922. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  923. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  924. #endif
  925.  
  926. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  927. //#define SOLENOID_PROBE
  928.  
  929. // A sled-mounted probe like those designed by Charles Bell.
  930. //#define Z_PROBE_SLED
  931. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  932.  
  933. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  934. //#define RACK_AND_PINION_PROBE
  935. #if ENABLED(RACK_AND_PINION_PROBE)
  936. #define Z_PROBE_DEPLOY_X X_MIN_POS
  937. #define Z_PROBE_RETRACT_X X_MAX_POS
  938. #endif
  939.  
  940. // Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J
  941. // When the pin is defined you can use M672 to set/reset the probe sensivity.
  942. //#define DUET_SMART_EFFECTOR
  943. #if ENABLED(DUET_SMART_EFFECTOR)
  944. #define SMART_EFFECTOR_MOD_PIN -1 // Connect a GPIO pin to the Smart Effector MOD pin
  945. #endif
  946.  
  947. /**
  948. * Use StallGuard2 to probe the bed with the nozzle.
  949. * Requires stallGuard-capable Trinamic stepper drivers.
  950. * CAUTION: This can damage machines with Z lead screws.
  951. * Take extreme care when setting up this feature.
  952. */
  953. //#define SENSORLESS_PROBING
  954.  
  955. //
  956. // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
  957. //
  958.  
  959. /**
  960. * Nozzle-to-Probe offsets { X, Y, Z }
  961. *
  962. * - Use a caliper or ruler to measure the distance from the tip of
  963. * the Nozzle to the center-point of the Probe in the X and Y axes.
  964. * - For the Z offset use your best known value and adjust at runtime.
  965. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
  966. *
  967. * Assuming the typical work area orientation:
  968. * - Probe to RIGHT of the Nozzle has a Positive X offset
  969. * - Probe to LEFT of the Nozzle has a Negative X offset
  970. * - Probe in BACK of the Nozzle has a Positive Y offset
  971. * - Probe in FRONT of the Nozzle has a Negative Y offset
  972. *
  973. * Some examples:
  974. * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, -1 } // Example "1"
  975. * #define NOZZLE_TO_PROBE_OFFSET {-10, 5, -1 } // Example "2"
  976. * #define NOZZLE_TO_PROBE_OFFSET { 5, -5, -1 } // Example "3"
  977. * #define NOZZLE_TO_PROBE_OFFSET {-15,-10, -1 } // Example "4"
  978. *
  979. * +-- BACK ---+
  980. * | [+] |
  981. * L | 1 | R <-- Example "1" (right+, back+)
  982. * E | 2 | I <-- Example "2" ( left-, back+)
  983. * F |[-] N [+]| G <-- Nozzle
  984. * T | 3 | H <-- Example "3" (right+, front-)
  985. * | 4 | T <-- Example "4" ( left-, front-)
  986. * | [-] |
  987. * O-- FRONT --+
  988. */
  989. #define NOZZLE_TO_PROBE_OFFSET { 10, 63, -0.5 }
  990.  
  991. // Most probes should stay away from the edges of the bed, but
  992. // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
  993. #define PROBING_MARGIN 10
  994.  
  995. // X and Y axis travel speed (mm/min) between probes
  996. #define XY_PROBE_SPEED (133*60)
  997.  
  998. // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  999. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  1000.  
  1001. // Feedrate (mm/min) for the "accurate" probe of each point
  1002. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  1003.  
  1004. /**
  1005. * Multiple Probing
  1006. *
  1007. * You may get improved results by probing 2 or more times.
  1008. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  1009. *
  1010. * A total of 2 does fast/slow probes with a weighted average.
  1011. * A total of 3 or more adds more slow probes, taking the average.
  1012. */
  1013. //#define MULTIPLE_PROBING 2
  1014. //#define EXTRA_PROBING 1
  1015.  
  1016. /**
  1017. * Z probes require clearance when deploying, stowing, and moving between
  1018. * probe points to avoid hitting the bed and other hardware.
  1019. * Servo-mounted probes require extra space for the arm to rotate.
  1020. * Inductive probes need space to keep from triggering early.
  1021. *
  1022. * Use these settings to specify the distance (mm) to raise the probe (or
  1023. * lower the bed). The values set here apply over and above any (negative)
  1024. * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
  1025. * Only integer values >= 1 are valid here.
  1026. *
  1027. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  1028. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  1029. */
  1030. #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow
  1031. #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
  1032. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  1033. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  1034.  
  1035. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  1036.  
  1037. // For M851 give a range for adjusting the Z probe offset
  1038. #define Z_PROBE_OFFSET_RANGE_MIN -20
  1039. #define Z_PROBE_OFFSET_RANGE_MAX 20
  1040.  
  1041. // Enable the M48 repeatability test to test probe accuracy
  1042. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  1043.  
  1044. // Before deploy/stow pause for user confirmation
  1045. //#define PAUSE_BEFORE_DEPLOY_STOW
  1046. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  1047. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  1048. #endif
  1049.  
  1050. /**
  1051. * Enable one or more of the following if probing seems unreliable.
  1052. * Heaters and/or fans can be disabled during probing to minimize electrical
  1053. * noise. A delay can also be added to allow noise and vibration to settle.
  1054. * These options are most useful for the BLTouch probe, but may also improve
  1055. * readings with inductive probes and piezo sensors.
  1056. */
  1057. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  1058. #if ENABLED(PROBING_HEATERS_OFF)
  1059. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  1060. #endif
  1061. //#define PROBING_FANS_OFF // Turn fans off when probing
  1062. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  1063. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  1064.  
  1065. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  1066. // :{ 0:'Low', 1:'High' }
  1067. #define X_ENABLE_ON 0
  1068. #define Y_ENABLE_ON 0
  1069. #define Z_ENABLE_ON 0
  1070. #define E_ENABLE_ON 0 // For all extruders
  1071.  
  1072. // Disable axis steppers immediately when they're not being stepped.
  1073. // WARNING: When motors turn off there is a chance of losing position accuracy!
  1074. #define DISABLE_X false
  1075. #define DISABLE_Y false
  1076. #define DISABLE_Z false
  1077.  
  1078. // Turn off the display blinking that warns about possible accuracy reduction
  1079. //#define DISABLE_REDUCED_ACCURACY_WARNING
  1080.  
  1081. // @section extruder
  1082.  
  1083. #define DISABLE_E false // Disable the extruder when not stepping
  1084. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  1085.  
  1086. // @section machine
  1087.  
  1088. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  1089. #define INVERT_X_DIR true
  1090. #define INVERT_Y_DIR true
  1091. #define INVERT_Z_DIR false
  1092.  
  1093. // @section extruder
  1094.  
  1095. // For direct drive extruder v9 set to true, for geared extruder set to false.
  1096. #define INVERT_E0_DIR false
  1097. #define INVERT_E1_DIR false
  1098. #define INVERT_E2_DIR false
  1099. #define INVERT_E3_DIR false
  1100. #define INVERT_E4_DIR false
  1101. #define INVERT_E5_DIR false
  1102. #define INVERT_E6_DIR false
  1103. #define INVERT_E7_DIR false
  1104.  
  1105. // @section homing
  1106.  
  1107. //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  1108.  
  1109. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  1110.  
  1111. //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  1112. // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
  1113.  
  1114. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
  1115.  
  1116. // Direction of endstops when homing; 1=MAX, -1=MIN
  1117. // :[-1,1]
  1118. #define X_HOME_DIR -1
  1119. #define Y_HOME_DIR -1
  1120. #define Z_HOME_DIR -1
  1121.  
  1122. // @section machine
  1123.  
  1124. // The size of the print bed
  1125. #define X_BED_SIZE 210
  1126. #define Y_BED_SIZE 270
  1127.  
  1128. // Travel limits (mm) after homing, corresponding to endstop positions.
  1129. #define X_MIN_POS 0
  1130. #define Y_MIN_POS 0
  1131. #define Z_MIN_POS 0
  1132. #define X_MAX_POS X_BED_SIZE
  1133. #define Y_MAX_POS Y_BED_SIZE
  1134. #define Z_MAX_POS 200
  1135.  
  1136. /**
  1137. * Software Endstops
  1138. *
  1139. * - Prevent moves outside the set machine bounds.
  1140. * - Individual axes can be disabled, if desired.
  1141. * - X and Y only apply to Cartesian robots.
  1142. * - Use 'M211' to set software endstops on/off or report current state
  1143. */
  1144.  
  1145. // Min software endstops constrain movement within minimum coordinate bounds
  1146. #define MIN_SOFTWARE_ENDSTOPS
  1147. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  1148. #define MIN_SOFTWARE_ENDSTOP_X
  1149. #define MIN_SOFTWARE_ENDSTOP_Y
  1150. #define MIN_SOFTWARE_ENDSTOP_Z
  1151. #endif
  1152.  
  1153. // Max software endstops constrain movement within maximum coordinate bounds
  1154. #define MAX_SOFTWARE_ENDSTOPS
  1155. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  1156. #define MAX_SOFTWARE_ENDSTOP_X
  1157. #define MAX_SOFTWARE_ENDSTOP_Y
  1158. #define MAX_SOFTWARE_ENDSTOP_Z
  1159. #endif
  1160.  
  1161. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  1162. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  1163. #endif
  1164.  
  1165. /**
  1166. * Filament Runout Sensors
  1167. * Mechanical or opto endstops are used to check for the presence of filament.
  1168. *
  1169. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  1170. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  1171. */
  1172. //#define FILAMENT_RUNOUT_SENSOR
  1173. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  1174. #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
  1175. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  1176. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
  1177. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  1178. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
  1179.  
  1180. // Set one or more commands to execute on filament runout.
  1181. // (After 'M412 H' Marlin will ask the host to handle the process.)
  1182. #define FILAMENT_RUNOUT_SCRIPT "M600"
  1183.  
  1184. // After a runout is detected, continue printing this length of filament
  1185. // before executing the runout script. Useful for a sensor at the end of
  1186. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  1187. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  1188.  
  1189. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  1190. // Enable this option to use an encoder disc that toggles the runout pin
  1191. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  1192. // large enough to avoid false positives.)
  1193. //#define FILAMENT_MOTION_SENSOR
  1194. #endif
  1195. #endif
  1196.  
  1197. //===========================================================================
  1198. //=============================== Bed Leveling ==============================
  1199. //===========================================================================
  1200. // @section calibrate
  1201.  
  1202. /**
  1203. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  1204. * and behavior of G29 will change depending on your selection.
  1205. *
  1206. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  1207. *
  1208. * - AUTO_BED_LEVELING_3POINT
  1209. * Probe 3 arbitrary points on the bed (that aren't collinear)
  1210. * You specify the XY coordinates of all 3 points.
  1211. * The result is a single tilted plane. Best for a flat bed.
  1212. *
  1213. * - AUTO_BED_LEVELING_LINEAR
  1214. * Probe several points in a grid.
  1215. * You specify the rectangle and the density of sample points.
  1216. * The result is a single tilted plane. Best for a flat bed.
  1217. *
  1218. * - AUTO_BED_LEVELING_BILINEAR
  1219. * Probe several points in a grid.
  1220. * You specify the rectangle and the density of sample points.
  1221. * The result is a mesh, best for large or uneven beds.
  1222. *
  1223. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  1224. * A comprehensive bed leveling system combining the features and benefits
  1225. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  1226. * Validation and Mesh Editing systems.
  1227. *
  1228. * - MESH_BED_LEVELING
  1229. * Probe a grid manually
  1230. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  1231. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  1232. * leveling in steps so you can manually adjust the Z height at each grid-point.
  1233. * With an LCD controller the process is guided step-by-step.
  1234. */
  1235. //#define AUTO_BED_LEVELING_3POINT
  1236. //#define AUTO_BED_LEVELING_LINEAR
  1237. #define AUTO_BED_LEVELING_BILINEAR
  1238. //#define AUTO_BED_LEVELING_UBL
  1239. //#define MESH_BED_LEVELING
  1240.  
  1241. /**
  1242. * Normally G28 leaves leveling disabled on completion. Enable
  1243. * this option to have G28 restore the prior leveling state.
  1244. */
  1245. //#define RESTORE_LEVELING_AFTER_G28
  1246.  
  1247. /**
  1248. * Enable detailed logging of G28, G29, M48, etc.
  1249. * Turn on with the command 'M111 S32'.
  1250. * NOTE: Requires a lot of PROGMEM!
  1251. */
  1252. //#define DEBUG_LEVELING_FEATURE
  1253.  
  1254. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1255. // Gradually reduce leveling correction until a set height is reached,
  1256. // at which point movement will be level to the machine's XY plane.
  1257. // The height can be set with M420 Z<height>
  1258. #define ENABLE_LEVELING_FADE_HEIGHT
  1259.  
  1260. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1261. // split up moves into short segments like a Delta. This follows the
  1262. // contours of the bed more closely than edge-to-edge straight moves.
  1263. #define SEGMENT_LEVELED_MOVES
  1264. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1265.  
  1266. /**
  1267. * Enable the G26 Mesh Validation Pattern tool.
  1268. */
  1269. //#define G26_MESH_VALIDATION
  1270. #if ENABLED(G26_MESH_VALIDATION)
  1271. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1272. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1273. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1274. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
  1275. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1276. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements.
  1277. #endif
  1278.  
  1279. #endif
  1280.  
  1281. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1282.  
  1283. // Set the number of grid points per dimension.
  1284. #define GRID_MAX_POINTS_X 6
  1285. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1286.  
  1287. // Probe along the Y axis, advancing X after each column
  1288. //#define PROBE_Y_FIRST
  1289.  
  1290. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1291.  
  1292. // Beyond the probed grid, continue the implied tilt?
  1293. // Default is to maintain the height of the nearest edge.
  1294. //#define EXTRAPOLATE_BEYOND_GRID
  1295.  
  1296. //
  1297. // Experimental Subdivision of the grid by Catmull-Rom method.
  1298. // Synthesizes intermediate points to produce a more detailed mesh.
  1299. //
  1300. //#define ABL_BILINEAR_SUBDIVISION
  1301. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1302. // Number of subdivisions between probe points
  1303. #define BILINEAR_SUBDIVISIONS 3
  1304. #endif
  1305.  
  1306. #endif
  1307.  
  1308. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1309.  
  1310. //===========================================================================
  1311. //========================= Unified Bed Leveling ============================
  1312. //===========================================================================
  1313.  
  1314. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1315.  
  1316. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1317. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1318. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1319.  
  1320. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1321. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1322.  
  1323. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1324. // as the Z-Height correction value.
  1325.  
  1326. #elif ENABLED(MESH_BED_LEVELING)
  1327.  
  1328. //===========================================================================
  1329. //=================================== Mesh ==================================
  1330. //===========================================================================
  1331.  
  1332. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1333. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1334. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1335.  
  1336. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1337.  
  1338. #endif // BED_LEVELING
  1339.  
  1340. /**
  1341. * Add a bed leveling sub-menu for ABL or MBL.
  1342. * Include a guided procedure if manual probing is enabled.
  1343. */
  1344. //#define LCD_BED_LEVELING
  1345.  
  1346. #if ENABLED(LCD_BED_LEVELING)
  1347. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1348. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1349. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1350. #endif
  1351.  
  1352. // Add a menu item to move between bed corners for manual bed adjustment
  1353. //#define LEVEL_BED_CORNERS
  1354.  
  1355. #if ENABLED(LEVEL_BED_CORNERS)
  1356. #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
  1357. #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
  1358. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
  1359. //#define LEVEL_CENTER_TOO // Move to the center after the last corner
  1360. #endif
  1361.  
  1362. /**
  1363. * Commands to execute at the end of G29 probing.
  1364. * Useful to retract or move the Z probe out of the way.
  1365. */
  1366. //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
  1367.  
  1368. // @section homing
  1369.  
  1370. // The center of the bed is at (X=0, Y=0)
  1371. //#define BED_CENTER_AT_0_0
  1372.  
  1373. // Manually set the home position. Leave these undefined for automatic settings.
  1374. // For DELTA this is the top-center of the Cartesian print volume.
  1375. //#define MANUAL_X_HOME_POS 0
  1376. //#define MANUAL_Y_HOME_POS 0
  1377. //#define MANUAL_Z_HOME_POS 0
  1378.  
  1379. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1380. //
  1381. // With this feature enabled:
  1382. //
  1383. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1384. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1385. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing.
  1386. // - Prevent Z homing when the Z probe is outside bed area.
  1387. //
  1388. #define Z_SAFE_HOMING
  1389.  
  1390. #if ENABLED(Z_SAFE_HOMING)
  1391. #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
  1392. #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing
  1393. #endif
  1394.  
  1395. // Homing speeds (mm/min)
  1396. #define HOMING_FEEDRATE_XY (50*60)
  1397. #define HOMING_FEEDRATE_Z (4*60)
  1398.  
  1399. // Validate that endstops are triggered on homing moves
  1400. #define VALIDATE_HOMING_ENDSTOPS
  1401.  
  1402. // @section calibrate
  1403.  
  1404. /**
  1405. * Bed Skew Compensation
  1406. *
  1407. * This feature corrects for misalignment in the XYZ axes.
  1408. *
  1409. * Take the following steps to get the bed skew in the XY plane:
  1410. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1411. * 2. For XY_DIAG_AC measure the diagonal A to C
  1412. * 3. For XY_DIAG_BD measure the diagonal B to D
  1413. * 4. For XY_SIDE_AD measure the edge A to D
  1414. *
  1415. * Marlin automatically computes skew factors from these measurements.
  1416. * Skew factors may also be computed and set manually:
  1417. *
  1418. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1419. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1420. *
  1421. * If desired, follow the same procedure for XZ and YZ.
  1422. * Use these diagrams for reference:
  1423. *
  1424. * Y Z Z
  1425. * ^ B-------C ^ B-------C ^ B-------C
  1426. * | / / | / / | / /
  1427. * | / / | / / | / /
  1428. * | A-------D | A-------D | A-------D
  1429. * +-------------->X +-------------->X +-------------->Y
  1430. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1431. */
  1432. //#define SKEW_CORRECTION
  1433.  
  1434. #if ENABLED(SKEW_CORRECTION)
  1435. // Input all length measurements here:
  1436. #define XY_DIAG_AC 282.8427124746
  1437. #define XY_DIAG_BD 282.8427124746
  1438. #define XY_SIDE_AD 200
  1439.  
  1440. // Or, set the default skew factors directly here
  1441. // to override the above measurements:
  1442. #define XY_SKEW_FACTOR 0.0
  1443.  
  1444. //#define SKEW_CORRECTION_FOR_Z
  1445. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1446. #define XZ_DIAG_AC 282.8427124746
  1447. #define XZ_DIAG_BD 282.8427124746
  1448. #define YZ_DIAG_AC 282.8427124746
  1449. #define YZ_DIAG_BD 282.8427124746
  1450. #define YZ_SIDE_AD 200
  1451. #define XZ_SKEW_FACTOR 0.0
  1452. #define YZ_SKEW_FACTOR 0.0
  1453. #endif
  1454.  
  1455. // Enable this option for M852 to set skew at runtime
  1456. //#define SKEW_CORRECTION_GCODE
  1457. #endif
  1458.  
  1459. //=============================================================================
  1460. //============================= Additional Features ===========================
  1461. //=============================================================================
  1462.  
  1463. // @section extras
  1464.  
  1465. /**
  1466. * EEPROM
  1467. *
  1468. * Persistent storage to preserve configurable settings across reboots.
  1469. *
  1470. * M500 - Store settings to EEPROM.
  1471. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1472. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1473. */
  1474. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1475. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1476. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1477. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
  1478. #if ENABLED(EEPROM_SETTINGS)
  1479. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1480. #endif
  1481.  
  1482. //
  1483. // Host Keepalive
  1484. //
  1485. // When enabled Marlin will send a busy status message to the host
  1486. // every couple of seconds when it can't accept commands.
  1487. //
  1488. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1489. #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
  1490. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1491.  
  1492. //
  1493. // G20/G21 Inch mode support
  1494. //
  1495. //#define INCH_MODE_SUPPORT
  1496.  
  1497. //
  1498. // M149 Set temperature units support
  1499. //
  1500. //#define TEMPERATURE_UNITS_SUPPORT
  1501.  
  1502. // @section temperature
  1503.  
  1504. // Preheat Constants
  1505. #define PREHEAT_1_LABEL "PLA"
  1506. #define PREHEAT_1_TEMP_HOTEND 180
  1507. #define PREHEAT_1_TEMP_BED 70
  1508. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  1509.  
  1510. #define PREHEAT_2_LABEL "ABS"
  1511. #define PREHEAT_2_TEMP_HOTEND 240
  1512. #define PREHEAT_2_TEMP_BED 110
  1513. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  1514.  
  1515. /**
  1516. * Nozzle Park
  1517. *
  1518. * Park the nozzle at the given XYZ position on idle or G27.
  1519. *
  1520. * The "P" parameter controls the action applied to the Z axis:
  1521. *
  1522. * P0 (Default) If Z is below park Z raise the nozzle.
  1523. * P1 Raise the nozzle always to Z-park height.
  1524. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1525. */
  1526. //#define NOZZLE_PARK_FEATURE
  1527.  
  1528. #if ENABLED(NOZZLE_PARK_FEATURE)
  1529. // Specify a park position as { X, Y, Z_raise }
  1530. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  1531. //#define NOZZLE_PARK_X_ONLY // X move only is required to park
  1532. //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
  1533. #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
  1534. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1535. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1536. #endif
  1537.  
  1538. /**
  1539. * Clean Nozzle Feature -- EXPERIMENTAL
  1540. *
  1541. * Adds the G12 command to perform a nozzle cleaning process.
  1542. *
  1543. * Parameters:
  1544. * P Pattern
  1545. * S Strokes / Repetitions
  1546. * T Triangles (P1 only)
  1547. *
  1548. * Patterns:
  1549. * P0 Straight line (default). This process requires a sponge type material
  1550. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1551. * between the start / end points.
  1552. *
  1553. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1554. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1555. * Zig-zags are done in whichever is the narrower dimension.
  1556. * For example, "G12 P1 S1 T3" will execute:
  1557. *
  1558. * --
  1559. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1560. * | | / \ / \ / \ |
  1561. * A | | / \ / \ / \ |
  1562. * | | / \ / \ / \ |
  1563. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1564. * -- +--------------------------------+
  1565. * |________|_________|_________|
  1566. * T1 T2 T3
  1567. *
  1568. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1569. * "R" specifies the radius. "S" specifies the stroke count.
  1570. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1571. *
  1572. * Caveats: The ending Z should be the same as starting Z.
  1573. * Attention: EXPERIMENTAL. G-code arguments may change.
  1574. */
  1575. //#define NOZZLE_CLEAN_FEATURE
  1576.  
  1577. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1578. // Default number of pattern repetitions
  1579. #define NOZZLE_CLEAN_STROKES 12
  1580.  
  1581. // Default number of triangles
  1582. #define NOZZLE_CLEAN_TRIANGLES 3
  1583.  
  1584. // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } }
  1585. // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }}
  1586. #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } }
  1587. #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } }
  1588.  
  1589. // Circular pattern radius
  1590. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1591. // Circular pattern circle fragments number
  1592. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1593. // Middle point of circle
  1594. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1595.  
  1596. // Move the nozzle to the initial position after cleaning
  1597. #define NOZZLE_CLEAN_GOBACK
  1598.  
  1599. // For a purge/clean station that's always at the gantry height (thus no Z move)
  1600. //#define NOZZLE_CLEAN_NO_Z
  1601.  
  1602. // For a purge/clean station mounted on the X axis
  1603. //#define NOZZLE_CLEAN_NO_Y
  1604.  
  1605. // Explicit wipe G-code script applies to a G12 with no arguments.
  1606. //#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
  1607.  
  1608. #endif
  1609.  
  1610. /**
  1611. * Print Job Timer
  1612. *
  1613. * Automatically start and stop the print job timer on M104/M109/M190.
  1614. *
  1615. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1616. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1617. * M190 (bed, wait) - high temp = start timer, low temp = none
  1618. *
  1619. * The timer can also be controlled with the following commands:
  1620. *
  1621. * M75 - Start the print job timer
  1622. * M76 - Pause the print job timer
  1623. * M77 - Stop the print job timer
  1624. */
  1625. #define PRINTJOB_TIMER_AUTOSTART
  1626.  
  1627. /**
  1628. * Print Counter
  1629. *
  1630. * Track statistical data such as:
  1631. *
  1632. * - Total print jobs
  1633. * - Total successful print jobs
  1634. * - Total failed print jobs
  1635. * - Total time printing
  1636. *
  1637. * View the current statistics with M78.
  1638. */
  1639. //#define PRINTCOUNTER
  1640.  
  1641. /**
  1642. * Password
  1643. *
  1644. * Set a numerical password for the printer which can be requested:
  1645. *
  1646. * - When the printer boots up
  1647. * - Upon opening the 'Print from Media' Menu
  1648. * - When SD printing is completed or aborted
  1649. *
  1650. * The following G-codes can be used:
  1651. *
  1652. * M510 - Lock Printer. Blocks all commands except M511.
  1653. * M511 - Unlock Printer.
  1654. * M512 - Set, Change and Remove Password.
  1655. *
  1656. * If you forget the password and get locked out you'll need to re-flash
  1657. * the firmware with the feature disabled, reset EEPROM, and (optionally)
  1658. * re-flash the firmware again with this feature enabled.
  1659. */
  1660. //#define PASSWORD_FEATURE
  1661. #if ENABLED(PASSWORD_FEATURE)
  1662. #define PASSWORD_LENGTH 4 // (#) Number of digits (1-9). 3 or 4 is recommended
  1663. #define PASSWORD_ON_STARTUP
  1664. #define PASSWORD_UNLOCK_GCODE // Unlock with the M511 P<password> command. Disable to prevent brute-force attack.
  1665. #define PASSWORD_CHANGE_GCODE // Change the password with M512 P<old> S<new>.
  1666. //#define PASSWORD_ON_SD_PRINT_MENU // This does not prevent gcodes from running
  1667. //#define PASSWORD_AFTER_SD_PRINT_END
  1668. //#define PASSWORD_AFTER_SD_PRINT_ABORT
  1669. //#include "Configuration_Secure.h" // External file with PASSWORD_DEFAULT_VALUE
  1670. #endif
  1671.  
  1672. //=============================================================================
  1673. //============================= LCD and SD support ============================
  1674. //=============================================================================
  1675.  
  1676. // @section lcd
  1677.  
  1678. /**
  1679. * LCD LANGUAGE
  1680. *
  1681. * Select the language to display on the LCD. These languages are available:
  1682. *
  1683. * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, hu, it,
  1684. * jp_kana, ko_KR, nl, pl, pt, pt_br, ro, ru, sk, tr, uk, vi, zh_CN, zh_TW, test
  1685. *
  1686. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'hu':'Hungarian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ro':'Romanian', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1687. */
  1688. #define LCD_LANGUAGE en
  1689.  
  1690. /**
  1691. * LCD Character Set
  1692. *
  1693. * Note: This option is NOT applicable to Graphical Displays.
  1694. *
  1695. * All character-based LCDs provide ASCII plus one of these
  1696. * language extensions:
  1697. *
  1698. * - JAPANESE ... the most common
  1699. * - WESTERN ... with more accented characters
  1700. * - CYRILLIC ... for the Russian language
  1701. *
  1702. * To determine the language extension installed on your controller:
  1703. *
  1704. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1705. * - Click the controller to view the LCD menu
  1706. * - The LCD will display Japanese, Western, or Cyrillic text
  1707. *
  1708. * See https://marlinfw.org/docs/development/lcd_language.html
  1709. *
  1710. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1711. */
  1712. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1713.  
  1714. /**
  1715. * Info Screen Style (0:Classic, 1:Průša)
  1716. *
  1717. * :[0:'Classic', 1:'Průša']
  1718. */
  1719. #define LCD_INFO_SCREEN_STYLE 0
  1720.  
  1721. /**
  1722. * SD CARD
  1723. *
  1724. * SD Card support is disabled by default. If your controller has an SD slot,
  1725. * you must uncomment the following option or it won't work.
  1726. */
  1727. //#define SDSUPPORT
  1728.  
  1729. /**
  1730. * SD CARD: SPI SPEED
  1731. *
  1732. * Enable one of the following items for a slower SPI transfer speed.
  1733. * This may be required to resolve "volume init" errors.
  1734. */
  1735. //#define SPI_SPEED SPI_HALF_SPEED
  1736. //#define SPI_SPEED SPI_QUARTER_SPEED
  1737. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1738.  
  1739. /**
  1740. * SD CARD: ENABLE CRC
  1741. *
  1742. * Use CRC checks and retries on the SD communication.
  1743. */
  1744. //#define SD_CHECK_AND_RETRY
  1745.  
  1746. /**
  1747. * LCD Menu Items
  1748. *
  1749. * Disable all menus and only display the Status Screen, or
  1750. * just remove some extraneous menu items to recover space.
  1751. */
  1752. //#define NO_LCD_MENUS
  1753. //#define SLIM_LCD_MENUS
  1754.  
  1755. //
  1756. // ENCODER SETTINGS
  1757. //
  1758. // This option overrides the default number of encoder pulses needed to
  1759. // produce one step. Should be increased for high-resolution encoders.
  1760. //
  1761. //#define ENCODER_PULSES_PER_STEP 4
  1762.  
  1763. //
  1764. // Use this option to override the number of step signals required to
  1765. // move between next/prev menu items.
  1766. //
  1767. //#define ENCODER_STEPS_PER_MENU_ITEM 1
  1768.  
  1769. /**
  1770. * Encoder Direction Options
  1771. *
  1772. * Test your encoder's behavior first with both options disabled.
  1773. *
  1774. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1775. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1776. * Reversed Value Editing only? Enable BOTH options.
  1777. */
  1778.  
  1779. //
  1780. // This option reverses the encoder direction everywhere.
  1781. //
  1782. // Set this option if CLOCKWISE causes values to DECREASE
  1783. //
  1784. //#define REVERSE_ENCODER_DIRECTION
  1785.  
  1786. //
  1787. // This option reverses the encoder direction for navigating LCD menus.
  1788. //
  1789. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1790. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1791. //
  1792. //#define REVERSE_MENU_DIRECTION
  1793.  
  1794. //
  1795. // This option reverses the encoder direction for Select Screen.
  1796. //
  1797. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1798. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1799. //
  1800. //#define REVERSE_SELECT_DIRECTION
  1801.  
  1802. //
  1803. // Individual Axis Homing
  1804. //
  1805. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1806. //
  1807. //#define INDIVIDUAL_AXIS_HOMING_MENU
  1808.  
  1809. //
  1810. // SPEAKER/BUZZER
  1811. //
  1812. // If you have a speaker that can produce tones, enable it here.
  1813. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1814. //
  1815. //#define SPEAKER
  1816.  
  1817. //
  1818. // The duration and frequency for the UI feedback sound.
  1819. // Set these to 0 to disable audio feedback in the LCD menus.
  1820. //
  1821. // Note: Test audio output with the G-Code:
  1822. // M300 S<frequency Hz> P<duration ms>
  1823. //
  1824. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  1825. //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
  1826.  
  1827. //=============================================================================
  1828. //======================== LCD / Controller Selection =========================
  1829. //======================== (Character-based LCDs) =========================
  1830. //=============================================================================
  1831.  
  1832. //
  1833. // RepRapDiscount Smart Controller.
  1834. // https://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1835. //
  1836. // Note: Usually sold with a white PCB.
  1837. //
  1838. #define REPRAP_DISCOUNT_SMART_CONTROLLER
  1839.  
  1840. //
  1841. // Original RADDS LCD Display+Encoder+SDCardReader
  1842. // http://doku.radds.org/dokumentation/lcd-display/
  1843. //
  1844. //#define RADDS_DISPLAY
  1845.  
  1846. //
  1847. // ULTIMAKER Controller.
  1848. //
  1849. //#define ULTIMAKERCONTROLLER
  1850.  
  1851. //
  1852. // ULTIPANEL as seen on Thingiverse.
  1853. //
  1854. //#define ULTIPANEL
  1855.  
  1856. //
  1857. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1858. // https://reprap.org/wiki/PanelOne
  1859. //
  1860. //#define PANEL_ONE
  1861.  
  1862. //
  1863. // GADGETS3D G3D LCD/SD Controller
  1864. // https://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1865. //
  1866. // Note: Usually sold with a blue PCB.
  1867. //
  1868. //#define G3D_PANEL
  1869.  
  1870. //
  1871. // RigidBot Panel V1.0
  1872. // http://www.inventapart.com/
  1873. //
  1874. //#define RIGIDBOT_PANEL
  1875.  
  1876. //
  1877. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1878. // https://www.aliexpress.com/item/32765887917.html
  1879. //
  1880. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1881.  
  1882. //
  1883. // ANET and Tronxy 20x4 Controller
  1884. //
  1885. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1886. // This LCD is known to be susceptible to electrical interference
  1887. // which scrambles the display. Pressing any button clears it up.
  1888. // This is a LCD2004 display with 5 analog buttons.
  1889.  
  1890. //
  1891. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1892. //
  1893. //#define ULTRA_LCD
  1894.  
  1895. //=============================================================================
  1896. //======================== LCD / Controller Selection =========================
  1897. //===================== (I2C and Shift-Register LCDs) =====================
  1898. //=============================================================================
  1899.  
  1900. //
  1901. // CONTROLLER TYPE: I2C
  1902. //
  1903. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1904. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1905. //
  1906.  
  1907. //
  1908. // Elefu RA Board Control Panel
  1909. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1910. //
  1911. //#define RA_CONTROL_PANEL
  1912.  
  1913. //
  1914. // Sainsmart (YwRobot) LCD Displays
  1915. //
  1916. // These require F.Malpartida's LiquidCrystal_I2C library
  1917. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1918. //
  1919. //#define LCD_SAINSMART_I2C_1602
  1920. //#define LCD_SAINSMART_I2C_2004
  1921.  
  1922. //
  1923. // Generic LCM1602 LCD adapter
  1924. //
  1925. //#define LCM1602
  1926.  
  1927. //
  1928. // PANELOLU2 LCD with status LEDs,
  1929. // separate encoder and click inputs.
  1930. //
  1931. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1932. // For more info: https://github.com/lincomatic/LiquidTWI2
  1933. //
  1934. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1935. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1936. //
  1937. //#define LCD_I2C_PANELOLU2
  1938.  
  1939. //
  1940. // Panucatt VIKI LCD with status LEDs,
  1941. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1942. //
  1943. //#define LCD_I2C_VIKI
  1944.  
  1945. //
  1946. // CONTROLLER TYPE: Shift register panels
  1947. //
  1948.  
  1949. //
  1950. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1951. // LCD configuration: https://reprap.org/wiki/SAV_3D_LCD
  1952. //
  1953. //#define SAV_3DLCD
  1954.  
  1955. //
  1956. // 3-wire SR LCD with strobe using 74HC4094
  1957. // https://github.com/mikeshub/SailfishLCD
  1958. // Uses the code directly from Sailfish
  1959. //
  1960. //#define FF_INTERFACEBOARD
  1961.  
  1962. //
  1963. // TFT GLCD Panel with Marlin UI
  1964. // Panel connected to main board by SPI or I2C interface.
  1965. // See https://github.com/Serhiy-K/TFTGLCDAdapter
  1966. //
  1967. //#define TFTGLCD_PANEL_SPI
  1968. //#define TFTGLCD_PANEL_I2C
  1969.  
  1970. //=============================================================================
  1971. //======================= LCD / Controller Selection =======================
  1972. //========================= (Graphical LCDs) ========================
  1973. //=============================================================================
  1974.  
  1975. //
  1976. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1977. //
  1978. // IMPORTANT: The U8glib library is required for Graphical Display!
  1979. // https://github.com/olikraus/U8glib_Arduino
  1980. //
  1981. // NOTE: If the LCD is unresponsive you may need to reverse the plugs.
  1982. //
  1983.  
  1984. //
  1985. // RepRapDiscount FULL GRAPHIC Smart Controller
  1986. // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1987. //
  1988. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1989.  
  1990. //
  1991. // ReprapWorld Graphical LCD
  1992. // https://reprapworld.com/?products_details&products_id/1218
  1993. //
  1994. //#define REPRAPWORLD_GRAPHICAL_LCD
  1995.  
  1996. //
  1997. // Activate one of these if you have a Panucatt Devices
  1998. // Viki 2.0 or mini Viki with Graphic LCD
  1999. // https://www.panucatt.com
  2000. //
  2001. //#define VIKI2
  2002. //#define miniVIKI
  2003.  
  2004. //
  2005. // MakerLab Mini Panel with graphic
  2006. // controller and SD support - https://reprap.org/wiki/Mini_panel
  2007. //
  2008. //#define MINIPANEL
  2009.  
  2010. //
  2011. // MaKr3d Makr-Panel with graphic controller and SD support.
  2012. // https://reprap.org/wiki/MaKr3d_MaKrPanel
  2013. //
  2014. //#define MAKRPANEL
  2015.  
  2016. //
  2017. // Adafruit ST7565 Full Graphic Controller.
  2018. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  2019. //
  2020. //#define ELB_FULL_GRAPHIC_CONTROLLER
  2021.  
  2022. //
  2023. // BQ LCD Smart Controller shipped by
  2024. // default with the BQ Hephestos 2 and Witbox 2.
  2025. //
  2026. //#define BQ_LCD_SMART_CONTROLLER
  2027.  
  2028. //
  2029. // Cartesio UI
  2030. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  2031. //
  2032. //#define CARTESIO_UI
  2033.  
  2034. //
  2035. // LCD for Melzi Card with Graphical LCD
  2036. //
  2037. //#define LCD_FOR_MELZI
  2038.  
  2039. //
  2040. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  2041. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  2042. //
  2043. //#define ULTI_CONTROLLER
  2044.  
  2045. //
  2046. // MKS MINI12864 with graphic controller and SD support
  2047. // https://reprap.org/wiki/MKS_MINI_12864
  2048. //
  2049. //#define MKS_MINI_12864
  2050.  
  2051. //
  2052. // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout.
  2053. // https://www.aliexpress.com/item/33018110072.html
  2054. //
  2055. //#define MKS_LCD12864
  2056.  
  2057. //
  2058. // FYSETC variant of the MINI12864 graphic controller with SD support
  2059. // https://wiki.fysetc.com/Mini12864_Panel/
  2060. //
  2061. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  2062. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  2063. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  2064. //#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight
  2065. //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
  2066.  
  2067. //
  2068. // Factory display for Creality CR-10
  2069. // https://www.aliexpress.com/item/32833148327.html
  2070. //
  2071. // This is RAMPS-compatible using a single 10-pin connector.
  2072. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  2073. //
  2074. //#define CR10_STOCKDISPLAY
  2075.  
  2076. //
  2077. // Ender-2 OEM display, a variant of the MKS_MINI_12864
  2078. //
  2079. //#define ENDER2_STOCKDISPLAY
  2080.  
  2081. //
  2082. // ANET and Tronxy Graphical Controller
  2083. //
  2084. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  2085. // A clone of the RepRapDiscount full graphics display but with
  2086. // different pins/wiring (see pins_ANET_10.h).
  2087. //
  2088. //#define ANET_FULL_GRAPHICS_LCD
  2089.  
  2090. //
  2091. // AZSMZ 12864 LCD with SD
  2092. // https://www.aliexpress.com/item/32837222770.html
  2093. //
  2094. //#define AZSMZ_12864
  2095.  
  2096. //
  2097. // Silvergate GLCD controller
  2098. // https://github.com/android444/Silvergate
  2099. //
  2100. //#define SILVER_GATE_GLCD_CONTROLLER
  2101.  
  2102. //=============================================================================
  2103. //============================== OLED Displays ==============================
  2104. //=============================================================================
  2105.  
  2106. //
  2107. // SSD1306 OLED full graphics generic display
  2108. //
  2109. //#define U8GLIB_SSD1306
  2110.  
  2111. //
  2112. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  2113. //
  2114. //#define SAV_3DGLCD
  2115. #if ENABLED(SAV_3DGLCD)
  2116. #define U8GLIB_SSD1306
  2117. //#define U8GLIB_SH1106
  2118. #endif
  2119.  
  2120. //
  2121. // TinyBoy2 128x64 OLED / Encoder Panel
  2122. //
  2123. //#define OLED_PANEL_TINYBOY2
  2124.  
  2125. //
  2126. // MKS OLED 1.3" 128×64 FULL GRAPHICS CONTROLLER
  2127. // https://reprap.org/wiki/MKS_12864OLED
  2128. //
  2129. // Tiny, but very sharp OLED display
  2130. //
  2131. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  2132. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  2133.  
  2134. //
  2135. // Zonestar OLED 128×64 FULL GRAPHICS CONTROLLER
  2136. //
  2137. //#define ZONESTAR_12864LCD // Graphical (DOGM) with ST7920 controller
  2138. //#define ZONESTAR_12864OLED // 1.3" OLED with SH1106 controller (default)
  2139. //#define ZONESTAR_12864OLED_SSD1306 // 0.96" OLED with SSD1306 controller
  2140.  
  2141. //
  2142. // Einstart S OLED SSD1306
  2143. //
  2144. //#define U8GLIB_SH1106_EINSTART
  2145.  
  2146. //
  2147. // Overlord OLED display/controller with i2c buzzer and LEDs
  2148. //
  2149. //#define OVERLORD_OLED
  2150.  
  2151. //
  2152. // FYSETC OLED 2.42" 128×64 FULL GRAPHICS CONTROLLER with WS2812 RGB
  2153. // Where to find : https://www.aliexpress.com/item/4000345255731.html
  2154. //#define FYSETC_242_OLED_12864 // Uses the SSD1309 controller
  2155.  
  2156. //=============================================================================
  2157. //========================== Extensible UI Displays ===========================
  2158. //=============================================================================
  2159.  
  2160. //
  2161. // DGUS Touch Display with DWIN OS. (Choose one.)
  2162. // ORIGIN : https://www.aliexpress.com/item/32993409517.html
  2163. // FYSETC : https://www.aliexpress.com/item/32961471929.html
  2164. //
  2165. //#define DGUS_LCD_UI_ORIGIN
  2166. //#define DGUS_LCD_UI_FYSETC
  2167. //#define DGUS_LCD_UI_HIPRECY
  2168.  
  2169. //
  2170. // Touch-screen LCD for Malyan M200/M300 printers
  2171. //
  2172. //#define MALYAN_LCD
  2173. #if ENABLED(MALYAN_LCD)
  2174. #define LCD_SERIAL_PORT 1 // Default is 1 for Malyan M200
  2175. #endif
  2176.  
  2177. //
  2178. // Touch UI for FTDI EVE (FT800/FT810) displays
  2179. // See Configuration_adv.h for all configuration options.
  2180. //
  2181. //#define TOUCH_UI_FTDI_EVE
  2182.  
  2183. //
  2184. // Touch-screen LCD for Anycubic printers
  2185. //
  2186. //#define ANYCUBIC_LCD_I3MEGA
  2187. //#define ANYCUBIC_LCD_CHIRON
  2188. #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
  2189. #define LCD_SERIAL_PORT 3 // Default is 3 for Anycubic
  2190. //#define ANYCUBIC_LCD_DEBUG
  2191. #endif
  2192.  
  2193. //
  2194. // Third-party or vendor-customized controller interfaces.
  2195. // Sources should be installed in 'src/lcd/extensible_ui'.
  2196. //
  2197. //#define EXTENSIBLE_UI
  2198.  
  2199. #if ENABLED(EXTENSIBLE_UI)
  2200. //#define EXTUI_LOCAL_BEEPER // Enables use of local Beeper pin with external display
  2201. #endif
  2202.  
  2203. //=============================================================================
  2204. //=============================== Graphical TFTs ==============================
  2205. //=============================================================================
  2206.  
  2207. /**
  2208. * TFT Type - Select your Display type
  2209. *
  2210. * Available options are:
  2211. * MKS_TS35_V2_0,
  2212. * MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35,
  2213. * MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R
  2214. * TFT_TRONXY_X5SA, ANYCUBIC_TFT35, LONGER_LK_TFT28
  2215. * TFT_GENERIC
  2216. *
  2217. * For TFT_GENERIC, you need to configure these 3 options:
  2218. * Driver: TFT_DRIVER
  2219. * Current Drivers are: AUTO, ST7735, ST7789, ST7796, R61505, ILI9328, ILI9341, ILI9488
  2220. * Resolution: TFT_WIDTH and TFT_HEIGHT
  2221. * Interface: TFT_INTERFACE_FSMC or TFT_INTERFACE_SPI
  2222. */
  2223. //#define TFT_GENERIC
  2224.  
  2225. /**
  2226. * TFT UI - User Interface Selection. Enable one of the following options:
  2227. *
  2228. * TFT_CLASSIC_UI - Emulated DOGM - 128x64 Upscaled
  2229. * TFT_COLOR_UI - Marlin Default Menus, Touch Friendly, using full TFT capabilities
  2230. * TFT_LVGL_UI - A Modern UI using LVGL
  2231. *
  2232. * For LVGL_UI also copy the 'assets' folder from the build directory to the
  2233. * root of your SD card, together with the compiled firmware.
  2234. */
  2235. //#define TFT_CLASSIC_UI
  2236. //#define TFT_COLOR_UI
  2237. //#define TFT_LVGL_UI
  2238.  
  2239. /**
  2240. * TFT Rotation. Set to one of the following values:
  2241. *
  2242. * TFT_ROTATE_90, TFT_ROTATE_90_MIRROR_X, TFT_ROTATE_90_MIRROR_Y,
  2243. * TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  2244. * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  2245. * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
  2246. */
  2247. //#define TFT_ROTATION TFT_NO_ROTATION
  2248.  
  2249. //=============================================================================
  2250. //============================ Other Controllers ============================
  2251. //=============================================================================
  2252.  
  2253. //
  2254. // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder.
  2255. //
  2256. //#define DWIN_CREALITY_LCD
  2257.  
  2258. //
  2259. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  2260. //
  2261. //#define TOUCH_SCREEN
  2262. #if ENABLED(TOUCH_SCREEN)
  2263. #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens
  2264. #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus
  2265.  
  2266. #define TOUCH_SCREEN_CALIBRATION
  2267.  
  2268. //#define XPT2046_X_CALIBRATION 12316
  2269. //#define XPT2046_Y_CALIBRATION -8981
  2270. //#define XPT2046_X_OFFSET -43
  2271. //#define XPT2046_Y_OFFSET 257
  2272. #endif
  2273.  
  2274. //
  2275. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  2276. // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/
  2277. //
  2278. //#define REPRAPWORLD_KEYPAD
  2279. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
  2280.  
  2281. //=============================================================================
  2282. //=============================== Extra Features ==============================
  2283. //=============================================================================
  2284.  
  2285. // @section extras
  2286.  
  2287. // Set number of user-controlled fans. Disable to use all board-defined fans.
  2288. // :[1,2,3,4,5,6,7,8]
  2289. //#define NUM_M106_FANS 1
  2290.  
  2291. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  2292. //#define FAST_PWM_FAN
  2293.  
  2294. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  2295. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  2296. // is too low, you should also increment SOFT_PWM_SCALE.
  2297. //#define FAN_SOFT_PWM
  2298.  
  2299. // Incrementing this by 1 will double the software PWM frequency,
  2300. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  2301. // However, control resolution will be halved for each increment;
  2302. // at zero value, there are 128 effective control positions.
  2303. // :[0,1,2,3,4,5,6,7]
  2304. #define SOFT_PWM_SCALE 0
  2305.  
  2306. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  2307. // be used to mitigate the associated resolution loss. If enabled,
  2308. // some of the PWM cycles are stretched so on average the desired
  2309. // duty cycle is attained.
  2310. //#define SOFT_PWM_DITHER
  2311.  
  2312. // Temperature status LEDs that display the hotend and bed temperature.
  2313. // If all hotends, bed temperature, and target temperature are under 54C
  2314. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  2315. //#define TEMP_STAT_LEDS
  2316.  
  2317. // Support for the BariCUDA Paste Extruder
  2318. //#define BARICUDA
  2319.  
  2320. // Support for BlinkM/CyzRgb
  2321. //#define BLINKM
  2322.  
  2323. // Support for PCA9632 PWM LED driver
  2324. //#define PCA9632
  2325.  
  2326. // Support for PCA9533 PWM LED driver
  2327. //#define PCA9533
  2328.  
  2329. /**
  2330. * RGB LED / LED Strip Control
  2331. *
  2332. * Enable support for an RGB LED connected to 5V digital pins, or
  2333. * an RGB Strip connected to MOSFETs controlled by digital pins.
  2334. *
  2335. * Adds the M150 command to set the LED (or LED strip) color.
  2336. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  2337. * luminance values can be set from 0 to 255.
  2338. * For NeoPixel LED an overall brightness parameter is also available.
  2339. *
  2340. * *** CAUTION ***
  2341. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  2342. * as the Arduino cannot handle the current the LEDs will require.
  2343. * Failure to follow this precaution can destroy your Arduino!
  2344. * NOTE: A separate 5V power supply is required! The NeoPixel LED needs
  2345. * more current than the Arduino 5V linear regulator can produce.
  2346. * *** CAUTION ***
  2347. *
  2348. * LED Type. Enable only one of the following two options.
  2349. */
  2350. //#define RGB_LED
  2351. //#define RGBW_LED
  2352.  
  2353. #if EITHER(RGB_LED, RGBW_LED)
  2354. //#define RGB_LED_R_PIN 34
  2355. //#define RGB_LED_G_PIN 43
  2356. //#define RGB_LED_B_PIN 35
  2357. //#define RGB_LED_W_PIN -1
  2358. #endif
  2359.  
  2360. // Support for Adafruit NeoPixel LED driver
  2361. //#define NEOPIXEL_LED
  2362. #if ENABLED(NEOPIXEL_LED)
  2363. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  2364. #define NEOPIXEL_PIN 4 // LED driving pin
  2365. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  2366. //#define NEOPIXEL2_PIN 5
  2367. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
  2368. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  2369. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  2370. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  2371.  
  2372. // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
  2373. //#define NEOPIXEL2_SEPARATE
  2374. #if ENABLED(NEOPIXEL2_SEPARATE)
  2375. #define NEOPIXEL2_PIXELS 15 // Number of LEDs in the second strip
  2376. #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255)
  2377. #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup
  2378. #else
  2379. //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel
  2380. #endif
  2381.  
  2382. // Use a single NeoPixel LED for static (background) lighting
  2383. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  2384. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  2385. #endif
  2386.  
  2387. /**
  2388. * Printer Event LEDs
  2389. *
  2390. * During printing, the LEDs will reflect the printer status:
  2391. *
  2392. * - Gradually change from blue to violet as the heated bed gets to target temp
  2393. * - Gradually change from violet to red as the hotend gets to temperature
  2394. * - Change to white to illuminate work surface
  2395. * - Change to green once print has finished
  2396. * - Turn off after the print has finished and the user has pushed a button
  2397. */
  2398. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  2399. #define PRINTER_EVENT_LEDS
  2400. #endif
  2401.  
  2402. /**
  2403. * Number of servos
  2404. *
  2405. * For some servo-related options NUM_SERVOS will be set automatically.
  2406. * Set this manually if there are extra servos needing manual control.
  2407. * Set to 0 to turn off servo support.
  2408. */
  2409. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  2410.  
  2411. // (ms) Delay before the next move will start, to give the servo time to reach its target angle.
  2412. // 300ms is a good value but you can try less delay.
  2413. // If the servo can't reach the requested position, increase it.
  2414. #define SERVO_DELAY { 300 }
  2415.  
  2416. // Only power servos during movement, otherwise leave off to prevent jitter
  2417. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  2418.  
  2419. // Edit servo angles with M281 and save to EEPROM with M500
  2420. //#define EDITABLE_SERVO_ANGLES
  2421.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!