Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
- Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.14 (AF)
- Device Model: ST3000DM001-1ER166
- Serial Number: Z502GAMY
- LU WWN Device Id: 5 000c50 087d7c12f
- Firmware Version: CC26
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.3/5319
- ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Jan 17 16:16:58 2024 EST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 36) The self-test routine was interrupted
- by the host with a hard or soft reset.
- Total time to complete Offline
- data collection: ( 80) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 309) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x1085) SCT Status supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 082 082 006 Pre-fail Always - 3588530
- 3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2902
- 5 Reallocated_Sector_Ct 0x0033 097 097 010 Pre-fail Always - 3144
- 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 4342115445
- 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10621
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 2795
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 026 026 000 Old_age Always - 74
- 188 Command_Timeout 0x0032 065 065 000 Old_age Always - 0 34 35
- 189 High_Fly_Writes 0x003a 027 027 000 Old_age Always - 73
- 190 Airflow_Temperature_Cel 0x0022 066 049 045 Old_age Always - 34 (Min/Max 32/37)
- 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 114
- 193 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 43356
- 194 Temperature_Celsius 0x0022 034 051 000 Old_age Always - 34 (0 15 0 0 0)
- 197 Current_Pending_Sector 0x0012 061 001 000 Old_age Always - 6424
- 198 Offline_Uncorrectable 0x0010 061 001 000 Old_age Offline - 6424
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7283h+06m+34.894s
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 22292928951
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 591056713664
- SMART Error Log Version: 1
- ATA Error Count: 74 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 74 occurred at disk power-on lifetime: 10608 hours (442 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 14d+13:11:39.689 READ DMA EXT
- 25 00 00 ff ff ff ef 00 14d+13:11:39.666 READ DMA EXT
- 35 00 00 ff ff ff ef 00 14d+13:11:39.665 WRITE DMA EXT
- c8 00 10 90 02 40 e0 00 14d+13:11:39.645 READ DMA
- 35 00 00 ff ff ff ef 00 14d+13:11:39.644 WRITE DMA EXT
- Error 73 occurred at disk power-on lifetime: 10608 hours (442 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 14d+13:11:35.674 READ DMA EXT
- 35 00 00 ff ff ff ef 00 14d+13:11:35.673 WRITE DMA EXT
- ec 00 00 00 00 00 a0 00 14d+13:11:35.671 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 14d+13:11:35.668 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 14d+13:11:35.666 IDENTIFY DEVICE
- Error 72 occurred at disk power-on lifetime: 10608 hours (442 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 14d+13:11:25.053 READ DMA EXT
- ec 00 00 00 00 00 a0 00 14d+13:11:25.050 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 14d+13:11:25.047 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 14d+13:11:25.045 IDENTIFY DEVICE
- 25 00 00 ff ff ff ef 00 14d+13:11:21.362 READ DMA EXT
- Error 71 occurred at disk power-on lifetime: 10608 hours (442 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 14d+13:11:21.362 READ DMA EXT
- ec 00 00 00 00 00 a0 00 14d+13:11:21.359 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 14d+13:11:21.357 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 14d+13:11:21.337 IDENTIFY DEVICE
- 00 00 00 00 00 00 00 04 14d+13:11:21.173 NOP [Abort queued commands]
- Error 70 occurred at disk power-on lifetime: 10608 hours (442 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 25 00 00 ff ff ff ef 00 14d+13:11:11.105 READ DMA EXT
- ec 00 00 00 00 00 a0 00 14d+13:11:11.102 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 14d+13:11:11.100 SET FEATURES [Set transfer mode]
- ec 00 00 00 00 00 a0 00 14d+13:11:11.080 IDENTIFY DEVICE
- 25 00 00 ff ff ff ef 00 14d+13:11:07.377 READ DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Interrupted (host reset) 00% 10608 -
- # 2 Short offline Completed without error 00% 10561 -
- # 3 Short offline Completed without error 00% 10393 -
- # 4 Extended offline Completed without error 00% 10272 -
- # 5 Short offline Completed without error 00% 10225 -
- # 6 Short offline Completed without error 00% 10153 -
- # 7 Short offline Completed without error 00% 9985 -
- # 8 Extended offline Completed without error 00% 9865 -
- # 9 Short offline Completed without error 00% 9817 -
- #10 Short offline Completed without error 00% 9649 -
- #11 Extended offline Completed without error 00% 9529 -
- #12 Short offline Completed without error 00% 9481 -
- #13 Short offline Completed without error 00% 9433 -
- #14 Short offline Completed without error 00% 9265 -
- #15 Extended offline Completed without error 00% 9145 -
- #16 Short offline Completed without error 00% 9097 -
- #17 Short offline Completed without error 00% 8935 -
- #18 Extended offline Completed without error 00% 8814 -
- #19 Short offline Completed without error 00% 8766 -
- #20 Short offline Completed without error 00% 8694 -
- #21 Short offline Completed without error 00% 8526 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
