Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.5-arch1-1-ARCH] (local build)
- Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Samsung SpinPoint M9T
- Device Model: ST2000LM003 HN-M201RAD
- Serial Number: S34RJ9DG123622
- LU WWN Device Id: 5 0004cf 20ef437d8
- Firmware Version: 2BC10007
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue Apr 2 23:21:04 2019 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (23040) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 384) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 3121
- 2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
- 3 Spin_Up_Time 0x0023 086 082 025 Pre-fail Always - 4268
- 4 Start_Stop_Count 0x0032 078 078 000 Old_age Always - 22608
- 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
- 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13221
- 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1435
- 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 258
- 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0002 064 046 000 Old_age Always - 23 (Min/Max 18/54)
- 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 107
- 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 33
- 225 Load_Cycle_Count 0x0032 069 069 000 Old_age Always - 317068
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 13221 -
- # 2 Short offline Completed: read failure 10% 9721 1684224048
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Completed [00% left] (0-65535)
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement