Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
- S - IMAGE_VARIANT_STRING=SDM845LA
- S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
- S - Boot Interface: UFS
- S - Secure Boot: Off
- S - Boot Config @ 0x00786070 = 0x000000c1
- S - JTAG ID @ 0x00786130 = 0x2008e0e1
- S - OEM ID @ 0x00786138 = 0x00000000
- S - Serial Number @ 0x00784138 = 0x6808ced7
- S - OEM Config Row 0 @ 0x00784188 = 0x0000000400000000
- S - OEM Config Row 1 @ 0x00784190 = 0x0000000000000000
- S - Feature Config Row 0 @ 0x007841a0 = 0x0050200080000400
- S - Feature Config Row 1 @ 0x007841a8 = 0xe000ffff00007fff
- S - Core 0 Frequency, 1516 MHz
- S - PBL Patch Ver: 1
- S - PBL freq: 600 MHZ
- B - 94 - PBL, Start
- B - 5276 - bootable_media_detect_entry
- B - 44018 - bootable_media_detect_success
- B - 44393 - elf_loader_entry
- B - 45019 - auth_hash_seg_entry
- B - 45218 - auth_hash_seg_exit
- B - 51197 - elf_segs_hash_verify_entry
- B - 57932 - elf_segs_hash_verify_exit
- B - 58557 - auth_xbl_sec_hash_seg_entry
- B - 65932 - auth_xbl_sec_hash_seg_exit
- B - 65933 - xbl_sec_segs_hash_verify_entry
- B - 66690 - xbl_sec_segs_hash_verify_exit
- B - 66716 - PBL, End
- B - 81953 - SBL1, Start
- B - 204655 - boot_flash_init, Start
- D - 0 - boot_flash_init, Delta
- B - 208650 - xblconfig_init, Start
- D - 519 - Auth Metadata
- D - 150212 - xblconfig_init, Delta
- B - 363834 - sbl1_ddr_set_default_params, Start
- D - 1494 - sbl1_ddr_set_default_params, Delta
- B - 371825 - boot_config_data_table_init, Start
- B - 376461 - CDT not programmed, using default
- D - 4575 - boot_config_data_table_init, Delta - (54 Bytes)
- B - 391010 - CDT Version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
- B - 396713 - pm_device_init, Start
- B - 1476322 - PM: PON REASON: PM0=0x400008000000040:0x0 PM1=0x400008000000020
- B - 1536254 - PM: SET_VAL:Skip
- D - 1140090 - pm_device_init, Delta
- B - 1539243 - pm_driver_init, Start
- D - 5307 - pm_driver_init, Delta
- B - 1548088 - PM: Trigger FG IMA Reset
- B - 1551657 - PM: Trigger FG IMA Reset.Completed
- B - 1560837 - PM: EntryVbat: 4224; EntrySOC: -1
- B - 1560868 - PM: ADSP result: 8
- B - 1565321 - PM: APSD in progress
- B - 1568554 - PM: BATT TEMP: 25 DegC
- B - 1572000 - vsense_init, Start
- D - 0 - vsense_init, Delta
- B - 1607624 - sbl1_ddr_set_params, Start
- B - 1609454 - Pre_DDR_clock_init, Start
- D - 61 - Pre_DDR_clock_init, Delta
- D - 7656 - sbl1_ddr_set_params, Delta
- B - 1619031 - sbl1_ddr_init, Start
- D - 16073 - sbl1_ddr_init, Delta
- B - 1639009 - DSF version = 253.10, DSF SHRM version = 173.3
- B - 1642333 - Manufacturer ID = 1, Device Type = 7
- B - 1647945 - Rank 0 size = 4096 MB, Rank 1 size = 0 MB
- B - 1652886 - do_ddr_training, Start
- B - 1659474 - Frequency = 1355 MHz
- D - 3599 - do_ddr_training, Delta
- B - 1667953 - pImem Init Start
- D - 9729 - pImem Init End, Delta
- B - 1679543 - clock_init, Start
- D - 213 - clock_init, Delta
- B - 1684576 - Image Load, Start
- D - 2897 - APDP Image Loaded, Delta - (0 Bytes)
- B - 1690676 - usb: UFS Serial - 5e0813e3
- B - 1695312 - usb: fedl, vbus_low
- B - 1699673 - PM: 0: PON=0x40:CBLPWR_N: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
- B - 1708030 - PM: 1: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
- B - 1715137 - PM: 2: PON=0x20:PON1: ON=0x80:PON_SEQ: OFF=0x4:RAW_XVDD_SHD
- B - 1721847 - PM: SMEM Chgr Info Write Success
- B - 1728038 - Image Load, Start
- D - 396 - Auth Metadata
- D - 10096 - Segments hash check
- D - 19612 - AOP Image Loaded, Delta - (178808 Bytes)
- B - 1750913 - Image Load, Start
- D - 397 - Auth Metadata
- D - 274 - Segments hash check
- D - 10858 - QSEE Dev Config Image Loaded, Delta - (33720 Bytes)
- B - 1770616 - Image Load, Start
- D - 3873 - Auth Metadata
- D - 10614 - Segments hash check
- D - 34130 - QSEE Image Loaded, Delta - (2035952 Bytes)
- B - 1808009 - Image Load, Start
- D - 122 - SEC Image Loaded, Delta - (4096 Bytes)
- B - 1816397 - Image Load, Start
- D - 427 - Auth Metadata
- D - 2409 - Segments hash check
- D - 17324 - QHEE Image Loaded, Delta - (380480 Bytes)
- B - 1837137 - Image Load, Start
- D - 5002 - STI Image Loaded, Delta - (0 Bytes)
- B - 1845402 - Image Load, Start
- D - 396 - Auth Metadata
- D - 762 - Segments hash check
- D - 10218 - ABL Image Loaded, Delta - (146000 Bytes)
- B - 1859005 - Image Load, Start
- D - 458 - Auth Metadata
- D - 9181 - Segments hash check
- D - 33062 - APPSBL Image Loaded, Delta - (2097152 Bytes)
- B - 1932571 - SBL1, End
- D - 1850618 - SBL1, Delta
- S - Flash Throughput, 121000 KB/s (4948646 Bytes, 40890 us)
- S - DDR Frequency, 1353 MHz
- UEFI Start [ 2277] SEC
- ASLR : On
- DEP : On
- Timer Delta : +1 mS
- RAM Entry 0 : Base 0x0000000080000000 Size 0x00000000FDFA0000
- UEFI Ver : 5.0.190528.BOOT.XF.2.0-00371-SDM845LZB-1
- Build Info : 64b May 28 2019 11:21:44
- Boot Device : UFS
- PROD Mode : TRUE
- Retail : TRUE
- PM0: 20, PM1: 21, PM2: 24,
- MDDPlatform DDC No Ack or Abitration lost
- not panel detected, use defualt panel !
- DisplayDxe: Resolution 1920x1080 (1 intf)
- Render Splash [ 3156]
- -----------------------------
- Platform Init [ 3223] BDS
- Platform : MTP
- Chip Name : SDA845
- Chip Ver : 2.1
- Core 0 Freq: 1612 MHz
- -----------------------------
- UEFI Total : 2649 ms
- POST Time [ 4926] OS Loader
- Loader Build Info: Nov 5 2019 15:15:06
- VB: RWDeviceState: Succeed using devinfo!
- Press <Down> to enter fastboot, <Up> to enter recovery, or <ESC> to enter EmergD
- Active Slot _a is bootable, retry count 7
- Loading Image Start : 4937 ms
- Loading Image Done : 4937 ms
- Total Image Read size : 4096 Bytes
- Loading Image Start : 4937 ms
- Loading Image Done : 4969 ms
- Total Image Read size : 16609280 Bytes
- Loading Image Start : 4971 ms
- No dtbo partition is found, Skip dtbo
- No Ffbm cookie found, ignore: Not Found
- Memory Base Address: 0x80000000
- Decompressing kernel image start: 4975 ms
- Decompressing kernel image done: 5184 ms
- dtbo partition does not exit
- Cmdline: root=PARTLABEL=rootfs console=tty0 console=ttyMSM0,115200n8 clk_ignore:
- BootLinux: failed to get dtbo image
- DTB offset is incorrect, kernel image does not have appended DTB
- RAM Partitions
- Add Base: 0x0000000080000000 Available Length: 0x00000000FDFA0000
- WARNING: Could not find mem-offline node.
- ERROR: Could not get splash memory region node
- kaslr-Seed is added to chosen node
- Shutting Down UEFI Boot Services: 5192 ms
- BDS: LogFs sync skipped, Unsupported
- App Log Flush : 50 ms
- Exit BS [ 5246] UEFI End
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
- [ 0.000000] Linux version 5.2.0-qcomlt-arm64 (abuild@worksonarm) (gcc versio9
- [ 0.000000] Machine model: Thundercomm Dragonboard 845c
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017df9fff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x17d7c6840-0x17d7c7fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000017df9ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000856fffff]
- [ 0.000000] node 0: [mem 0x0000000085d00000-0x0000000085dfffff]
- [ 0.000000] node 0: [mem 0x0000000085f00000-0x0000000085fbffff]
- [ 0.000000] node 0: [mem 0x0000000089100000-0x000000008aafffff]
- [ 0.000000] node 0: [mem 0x000000008c417000-0x000000008c4fffff]
- [ 0.000000] node 0: [mem 0x0000000097c00000-0x000000017df9ffff]
- [ 0.000000] Zeroed struct page in unavailable ranges: 512 pages
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017df9ffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] psci: OSI mode supported.
- [ 0.000000] percpu: Embedded 23 pages/cpu s57304 r8192 d28712 u94208
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.000000] CPU features: detected: Hardware dirty bit management
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 957419
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=PARTLABEL=rootfs console=tty0 console=:
- [ 0.000000] software IO TLB: mapped [mem 0xfa000000-0xfe000000] (64MB)
- [ 0.000000] Memory: 3686280K/3890468K available (13372K kernel code, 2194K r)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2c0/0x468 wi0
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/vir.
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
- [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398s
- [ 0.000312] Console: colour dummy device 80x25
- [ 0.000625] printk: console [tty0] enabled
- [ 0.000731] Calibrating delay loop (skipped), value calculated using timer f)
- [ 0.000750] pid_max: default: 32768 minimum: 301
- [ 0.000809] LSM: Security Framework initializing
- [ 0.001911] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
- [ 0.002489] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.002564] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.002605] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.027191] ASID allocator initialised with 32768 entries
- [ 0.035181] rcu: Hierarchical SRCU implementation.
- [ 0.047665] EFI services will not be available.
- [ 0.055684] smp: Bringing up secondary CPUs ...
- [ 0.089027] Detected VIPT I-cache on CPU1
- [ 0.089070] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
- [ 0.089129] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
- [ 0.121017] Detected VIPT I-cache on CPU2
- [ 0.121046] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
- [ 0.121092] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
- [ 0.153197] Detected VIPT I-cache on CPU3
- [ 0.153220] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
- [ 0.153259] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
- [ 0.185885] Detected VIPT I-cache on CPU4
- [ 0.185912] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
- [ 0.185954] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
- [ 0.217690] Detected VIPT I-cache on CPU5
- [ 0.217718] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
- [ 0.217761] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
- [ 0.249908] Detected VIPT I-cache on CPU6
- [ 0.249937] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
- [ 0.249980] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
- [ 0.282138] Detected VIPT I-cache on CPU7
- [ 0.282169] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
- [ 0.282213] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
- [ 0.282298] smp: Brought up 1 node, 8 CPUs
- [ 0.282420] SMP: Total of 8 processors activated.
- [ 0.282429] CPU features: detected: Privileged Access Never
- [ 0.282436] CPU features: detected: LSE atomic instructions
- [ 0.282443] CPU features: detected: User Access Override
- [ 0.282451] CPU features: detected: 32-bit EL0 Support
- [ 0.282458] CPU features: detected: Common not Private translations
- [ 0.282465] CPU features: detected: RAS Extension Support
- [ 0.282472] CPU features: detected: Data cache clean to the PoU not requirede
- [ 0.282482] CPU features: detected: CRC32 instructions
- [ 1.101732] CPU: All CPU(s) started at EL1
- [ 1.101777] alternatives: patching kernel code
- [ 1.107089] devtmpfs: initialized
- [ 1.116263] Registered cp15_barrier emulation handler
- [ 1.116295] Registered setend emulation handler
- [ 1.116570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
- [ 1.116620] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 1.117474] pinctrl core: initialized pinctrl subsystem
- [ 1.118651] DMI not present or invalid.
- [ 1.118937] NET: Registered protocol family 16
- [ 1.119399] audit: initializing netlink subsys (disabled)
- [ 1.119538] audit: type=2000 audit(0.300:1): state=initialized audit_enabled1
- [ 1.120676] cpuidle: using governor menu
- [ 1.120969] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 1.121689] DMA: preallocated 256 KiB pool for atomic allocations
- [ 1.122807] Serial: AMBA PL011 UART driver
- [ 1.145948] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 1.145961] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 1.145970] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 1.145979] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 1.148102] cryptd: max_cpu_qlen set to 1000
- [ 1.152070] ACPI: Interpreter disabled.
- [ 1.169675] VBAT: supplied by DC12V
- [ 1.169857] VBAT_SOM: supplied by DC12V
- [ 1.169960] PCIE0_1.05V: supplied by VBAT
- [ 1.169999] VLDO_3V3: supplied by VBAT
- [ 1.170099] VDC_3V3: supplied by DC12V
- [ 1.170263] VDC_5V: supplied by DC12V
- [ 1.170368] LT9611_3V3: supplied by VDC_3V3
- [ 1.170535] LT9611_1V8: supplied by VDC_5V
- [ 1.170571] V5P0_HDMIOUT: supplied by VDC_5V
- [ 1.170662] vph_pwr: supplied by VBAT_SOM
- [ 1.171284] vgaarb: loaded
- [ 1.171481] SCSI subsystem initialized
- [ 1.171827] usbcore: registered new interface driver usbfs
- [ 1.171859] usbcore: registered new interface driver hub
- [ 1.171925] usbcore: registered new device driver usb
- [ 1.172512] pps_core: LinuxPPS API ver. 1 registered
- [ 1.172522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
- [ 1.172539] PTP clock support registered
- [ 1.172637] EDAC MC: Ver: 3.0.0
- [ 1.173837] FPGA manager framework
- [ 1.173904] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.174771] clocksource: Switched to clocksource arch_sys_counter
- [ 1.174873] VFS: Disk quotas dquot_6.6.0
- [ 1.174922] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.175066] pnp: PnP ACPI: disabled
- [ 1.181606] NET: Registered protocol family 2
- [ 1.182093] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 327)
- [ 1.182175] TCP established hash table entries: 32768 (order: 6, 262144 byte)
- [ 1.182387] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 1.182828] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.182931] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.182999] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 1.183143] NET: Registered protocol family 1
- [ 1.183501] RPC: Registered named UNIX socket transport module.
- [ 1.183513] RPC: Registered udp transport module.
- [ 1.183521] RPC: Registered tcp transport module.
- [ 1.183528] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.183864] PCI: CLS 0 bytes, default 64
- [ 1.184006] Unpacking initramfs...
- [ 1.430213] Freeing initrd memory: 6036K
- [ 1.431277] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters ae
- [ 1.431575] kvm [1]: HYP mode not available
- [ 1.536903] Initialise system trusted keyrings
- [ 1.537037] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 1.541345] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.541803] NFS: Registering the id_resolver key type
- [ 1.541826] Key type id_resolver registered
- [ 1.541834] Key type id_legacy registered
- [ 1.541851] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.542000] 9p: Installing v9fs 9p2000 file system support
- [ 1.547526] Key type asymmetric registered
- [ 1.547539] Asymmetric key parser 'x509' registered
- [ 1.547570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
- [ 1.547582] io scheduler mq-deadline registered
- [ 1.547591] io scheduler kyber registered
- [ 1.557310] EINJ: ACPI disabled.
- [ 2.583009] smps3: supplied by vph_pwr
- [ 2.583075] smps3: Setting 1352000-1352000uV
- [ 2.583219] smps5: supplied by vph_pwr
- [ 2.583249] smps5: Setting 1904000-2040000uV
- [ 2.583352] smps7: supplied by vph_pwr
- [ 2.583380] smps7: Setting 900000-1028000uV
- [ 2.583487] ldo1: supplied by smps7
- [ 2.583527] ldo1: Setting 880000-880000uV
- [ 2.583688] ldo5: supplied by smps7
- [ 2.583715] ldo5: Setting 800000-800000uV
- [ 2.583860] ldo12: supplied by smps5
- [ 2.583890] ldo12: Setting 1800000-1800000uV
- [ 2.584053] ldo7: supplied by smps5
- [ 2.584090] ldo7: Setting 1800000-1800000uV
- [ 2.584237] ldo13: Setting 1800000-2960000uV
- [ 2.584391] ldo17: supplied by smps3
- [ 2.584423] ldo17: Setting 1304000-1304000uV
- [ 2.584574] ldo20: Setting 2960000-2968000uV
- [ 2.584737] ldo21: Setting 2960000-2968000uV
- [ 2.584905] ldo24: Setting 3088000-3088000uV
- [ 2.585088] ldo25: Setting 3300000-3312000uV
- [ 2.585265] ldo26: supplied by smps3
- [ 2.585292] ldo26: Setting 1200000-1200000uV
- [ 2.585508] bob: supplied by vph_pwr
- [ 2.585535] bob: Setting 3312000-3600000uV
- [ 2.589387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.591139] SuperH (H)SCI(F) driver initialized
- [ 2.591661] msm_serial: driver initialized
- [ 2.591950] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 128, base_baud = 0M
- [ 2.592170] serial serial0: tty port ttyHS0 registered
- [ 2.592326] a84000.serial: ttyMSM0 at MMIO 0xa84000 (irq = 129, base_baud = M
- [ 3.736316] printk: console [ttyMSM0] enabled
- [ 3.741497] arm-smmu 5040000.iommu: probing hardware configuration...
- [ 3.748024] arm-smmu 5040000.iommu: SMMUv2 with:
- [ 3.752746] arm-smmu 5040000.iommu: stage 1 translation
- [ 3.758135] arm-smmu 5040000.iommu: address translation ops
- [ 3.763863] arm-smmu 5040000.iommu: non-coherent table walk
- [ 3.769587] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configurati)
- [ 3.776983] arm-smmu 5040000.iommu: stream matching with 5 register groups
- [ 3.784054] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only)
- [ 3.790602] arm-smmu 5040000.iommu: Supported page sizes: 0x63315000
- [ 3.797124] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
- [ 3.805346] arm-smmu 15000000.iommu: option qcom,smmu-500-fw-impl-errata
- [ 3.812487] arm-smmu 15000000.iommu: probing hardware configuration...
- [ 3.819090] arm-smmu 15000000.iommu: SMMUv2 with:
- [ 3.823882] arm-smmu 15000000.iommu: stage 1 translation
- [ 3.829349] arm-smmu 15000000.iommu: non-coherent table walk
- [ 3.835168] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW con)
- [ 3.842647] arm-smmu 15000000.iommu: stream matching with 76 registes
- [ 3.849879] arm-smmu 15000000.iommu: 45 context banks (0 stage-2 onl)
- [ 3.856588] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
- [ 3.863191] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
- [ 3.884079] loop: module loaded
- [ 3.888305] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 0
- [ 3.894630] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 3.905445] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 3.915991] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 3.926799] ldo20: supplied by bob
- [ 3.930632] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. h7
- [ 3.940221] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom7
- [ 3.949345] ufshcd-qcom 1d84000.ufshc: Initialization failed
- [ 3.955168] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
- [ 3.964803] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
- [ 3.981025] libphy: Fixed MDIO Bus: probed
- [ 3.985380] tun: Universal TUN/TAP device driver, 1.6
- [ 3.991261] thunder_xcv, ver 1.0
- [ 3.994559] thunder_bgx, ver 1.0
- [ 3.997864] nicpf, ver 1.0
- [ 4.001195] hclge is initializing
- [ 4.004571] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - versin
- [ 4.011881] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 4.017292] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 4.023202] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 4.029218] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 4.036252] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 4.041921] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
- [ 4.049843] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 4.056124] sky2: driver version 1.30
- [ 4.060419] usbcore: registered new interface driver rtl8150
- [ 4.066173] usbcore: registered new interface driver r8152
- [ 4.071754] usbcore: registered new interface driver asix
- [ 4.077240] usbcore: registered new interface driver ax88179_178a
- [ 4.083513] VFIO - User Level meta-driver version: 0.3
- [ 4.091976] dwc3 a600000.dwc3: Adding to iommu group 1
- [ 4.097358] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
- [ 4.105437] dwc3 a800000.dwc3: Adding to iommu group 2
- [ 4.110812] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
- [ 4.117219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.123852] ehci-pci: EHCI PCI platform driver
- [ 4.128382] ehci-platform: EHCI generic platform driver
- [ 4.133812] ehci-orion: EHCI orion driver
- [ 4.137978] ehci-exynos: EHCI EXYNOS driver
- [ 4.142299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.148563] ohci-pci: OHCI PCI platform driver
- [ 4.153091] ohci-platform: OHCI generic platform driver
- [ 4.158499] ohci-exynos: OHCI EXYNOS driver
- [ 4.162863] usbcore: registered new interface driver usb-storage
- [ 4.168989] usbcore: registered new interface driver usbserial_generic
- [ 4.175605] usbserial: USB Serial support registered for generic
- [ 4.184138] i2c /dev entries driver
- [ 4.198086] sdhci: Secure Digital Host Controller Interface driver
- [ 4.204371] sdhci: Copyright(c) Pierre Ossman
- [ 4.208931] Synopsys Designware Multimedia Card Interface Driver
- [ 4.215326] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.221618] sdhci_msm 8804000.sdhci: Adding to iommu group 3
- [ 4.227479] sdhci_msm 8804000.sdhci: Got CD GPIO
- [ 4.232218] sdhci_msm 8804000.sdhci: TCXO clk not present (-2)
- [ 4.238351] ldo21: supplied by bob
- [ 4.241842] ldo13: supplied by bob
- [ 4.277898] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADt
- [ 4.286861] ledtrig-cpu: registered to indicate activity on CPUs
- [ 4.293381] usbcore: registered new interface driver usbhid
- [ 4.299012] usbhid: USB HID core driver
- [ 4.304440] usbcore: registered new interface driver snd-usb-audio
- [ 4.311404] NET: Registered protocol family 10
- [ 4.316480] Segment Routing with IPv6
- [ 4.320210] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 4.326386] NET: Registered protocol family 17
- [ 4.330947] 9pnet: Installing 9P2000 support
- [ 4.335293] Key type dns_resolver registered
- [ 4.339885] registered taskstats version 1
- [ 4.344041] Loading compiled-in X.509 certificates
- [ 4.353176] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
- [ 4.359194] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
- [ 4.365219] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
- [ 4.371232] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
- [ 4.377158] ldo24: supplied by bob
- [ 4.380681] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
- [ 4.386970] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
- [ 4.393511] qcom-pcie 1c00000.pci: 1c00000.pci supply vdda not found, using r
- [ 4.403724] qcom-pcie 1c00000.pci: host bridge /soc/pci@1c00000 ranges:
- [ 4.410414] qcom-pcie 1c00000.pci: IO 0x60200000..0x602fffff -> 0x60200000
- [ 4.417619] qcom-pcie 1c00000.pci: MEM 0x60300000..0x60ffffff -> 0x60300000
- [ 4.544354] qcom-pcie 1c00000.pci: Link up
- [ 4.548557] qcom-pcie 1c00000.pci: PCI host bridge to bus 0000:00
- [ 4.554720] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 4.560271] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus add)
- [ 4.569920] pci_bus 0000:00: root bus resource [mem 0x60300000-0x60ffffff]
- [ 4.576879] pci 0000:00:00.0: [17cb:0106] type 01 class 0x060400
- [ 4.582969] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- [ 4.589875] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 4.597640] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
- [ 4.603896] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
- [ 4.611453] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 4.627933] pci 0000:00:00.0: BAR 14: assigned [mem 0x60300000-0x603fffff]
- [ 4.634877] pci 0000:00:00.0: BAR 0: assigned [mem 0x60400000-0x60400fff 64b]
- [ 4.642259] pci 0000:01:00.0: BAR 0: assigned [mem 0x60300000-0x60301fff 64b]
- [ 4.649701] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 4.654981] pci 0000:00:00.0: bridge window [mem 0x60300000-0x603fffff]
- [ 4.662021] pcieport 0000:00:00.0: Adding to iommu group 4
- [ 4.668116] pcieport 0000:00:00.0: PME: Signaling with IRQ 139
- [ 4.674191] pcieport 0000:00:00.0: AER: enabled with IRQ 139
- [ 4.679993] pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 4.686161] bam-dma-engine 17184000.bamdma: Adding to iommu group 5
- [ 4.693507] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 4.704315] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 4.714843] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find d
- [ 4.726363] scsi host0: ufshcd
- [ 4.743178] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
- [ 4.751963] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
- [ 4.759365] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=0
- [ 4.760938] PM: genpd: Not disabling unused power domains
- [ 4.778391] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 4.785303] hctosys: unable to open rtc device (rtc0)
- [ 4.790659] cfg80211: Loading compiled-in X.509 certificates for regulatory e
- [ 4.805274] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 4.811945] platform regulatory.0: Direct firmware load for regulatory.db fa2
- [ 4.817947] clk: Not disabling unused clocks
- [ 4.820652] cfg80211: failed to load regulatory.db
- [ 4.825005] ldo25: supplied by bob
- [ 4.827840] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=2
- [ 4.828023] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level:0
- [ 4.832816] scsi 0:0:0:49488: Well-known LUN SKhynix H28S7Q302BMR A06
- [ 4.833322] LT9611_1V8: disabling
- [ 4.852252] scsi 0:0:0:49476: Well-known LUN SKhynix H28S7Q302BMR A06
- [ 4.856614] LT9611_3V3: disabling
- [ 4.856616] PCIE0_1.05V: disabling
- [ 4.856618] V5P0_HDMIOUT: disabling
- [ 4.856626] ldo5: disabling
- [ 4.865221] ldo7: disabling
- [ 4.869218] scsi 0:0:0:49456: Well-known LUN SKhynix H28S7Q302BMR A06
- [ 4.877142] ldo17: disabling
- [ 4.881084] scsi 0:0:0:0: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 4.883946] ldo25: disabling
- [ 4.888005] scsi 0:0:0:1: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 4.888182] sd 0:0:0:0: [sda] 14145536 4096-byte logical blocks: (57.9 GB/54)
- [ 4.888245] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.888372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supA
- [ 4.888438] sd 0:0:0:0: [sda] Optimal transfer size 786432 bytes
- [ 4.890410] sda: sda1
- [ 4.890656] ALSA device list:
- [ 4.890662] No soundcards found.
- [ 4.893640] scsi 0:0:0:2: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 4.893963] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 M)
- [ 4.894026] sd 0:0:0:1: [sdb] Write Protect is off
- [ 4.894141] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supA
- [ 4.894196] sd 0:0:0:1: [sdb] Optimal transfer size 786432 bytes
- [ 4.895587] sdb: sdb1 sdb2
- [ 4.896609] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 4.902565] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.905019] scsi 0:0:0:3: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 4.905230] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 M)
- [ 4.905290] sd 0:0:0:2: [sdc] Write Protect is off
- [ 4.905407] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supA
- [ 4.905463] sd 0:0:0:2: [sdc] Optimal transfer size 786432 bytes
- [ 4.906808] sdc: sdc1 sdc2
- [ 4.907797] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 5.050128] scsi 0:0:0:4: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 5.050176] random: fast init done
- [ 5.061904] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 Mi)
- [ 5.062216] scsi 0:0:0:5: Direct-Access SKhynix H28S7Q302BMR A002 P6
- [ 5.062431] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.0)
- [ 5.062488] sd 0:0:0:4: [sde] Write Protect is off
- [ 5.062603] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supA
- [ 5.062662] sd 0:0:0:4: [sde] Optimal transfer size 786432 bytes
- [ 5.064404] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 s8
- [ 5.067076] sd 0:0:0:4: [sde] Attached SCSI disk
- [ 5.069264] sd 0:0:0:3: [sdd] Write Protect is off
- [ 5.078046] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50)
- [ 5.089913] sd 0:0:0:5: [sdf] Write Protect is off
- [ 5.098572] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supA
- [ 5.130936] sd 0:0:0:3: [sdd] Optimal transfer size 786432 bytes
- [ 5.135674] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supA
- [ 5.141891] sdd: sdd1 sdd2 sdd3
- [ 5.148020] sd 0:0:0:5: [sdf] Optimal transfer size 786432 bytes
- [ 5.153834] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 5.162909] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
- [ 5.197207] sd 0:0:0:5: [sdf] Attached SCSI disk
- [ 5.202079] Freeing unused kernel memory: 1472K
- [ 5.218821] Run /init as init process
- Loading, please wait...
- Starting version 241
- [ 5.369324] xhci_hcd 0000:01:00.0: Adding to iommu group 4
- [ 5.375192] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 5.380525] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numb1
- [ 5.382068] geni_i2c a8c000.i2c: Bus frequency not specified, default to 100.
- [ 5.388057] xhci_hcd 0000:01:00.0: Zeroing 64bit base registers, expecting ft
- [ 5.389279] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.389287] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n2
- [ 5.389477] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110
- [ 5.389515] xhci-hcd xhci-hcd.0.auto: irq 137, io mem 0x0a800000
- [ 5.395738] hub 2-0:1.0: USB hub found
- [ 5.396230] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: registered as rtc0
- [ 5.396989] geni_i2c a98000.i2c: Bus frequency not specified, default to 100.
- [ 5.424578] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 q0
- [ 5.426475] hub 2-0:1.0: 1 port detected
- [ 5.463254] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 5.463585] hub 1-0:1.0: USB hub found
- [ 5.473946] hub 1-0:1.0: 4 ports detected
- [ 5.478958] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n3
- [ 5.478988] xhci_hcd 0000:01:00.0: xHCI Host Controller
- [ 5.486722] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 5.493011] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numb4
- [ 5.498624] usb usb3: We don't know the algorithms for LPM for this host, di.
- [ 5.506165] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
- [ 5.514949] hub 3-0:1.0: USB hub found
- [ 5.524387] hub 3-0:1.0: 1 port detected
- [ 5.528537] usb usb4: We don't know the algorithms for LPM for this host, di.
- [ 5.536948] hub 4-0:1.0: USB hub found
- [ 5.540768] hub 4-0:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck no[ 5.723636] EXT4-fs (sda1): INFO: recot present, so sk[ 5m
- [ 5.797388] EXT4-fs (sda1): recovery complete
- [ 5.802488] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 5.925789] systemd[1]: System time before build time, advancing clock.
- Welcome to Debian GNU/Linux 10 (buster)!
- Failed to bump fs.file-max, ignoring: Invalid argument
- File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall .
- Proceeding WITHOUT firewalling in effect! (This warning is only shown for the f)
- Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Pl)
- [ OK 6.082438] random: systemd: uninitialized urandom read (16 bytes read)
- m] Started Forward Password R��…uests to Wall Directory Watch.
- [ OK ] Set up automount Arbitrary��…s File System Automount Point.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Created slice 6.163101] EXT4-fs (sda1): re-mounted. Opts: data=ordd
- ;1;39msystem-getty.slice.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket.
- Starting Nameserver information manager...
- Mounting Huge Pages File System...
- Mounting POSIX Message Queue File System...
- Mounting Kernel Debug File System...
- Starting File System Check on Root Device...
- Starting Load Kernel Modules...
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Reached target Slices.
- Starting Set the console keyboard layout...
- Starting Create list of re��…odes for the current kernel...
- [ OK ] Started Dispatch Password ��…ts to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Create list of req��… nodes for the current kernel.
- [ OK ] Started File System Check Daemon to report status.
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- [ OK ] Started Nameserver information manager.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started File System Check on Root Device.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Started Journal Service.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Remount Root and Kernel File Systems.
- Starting Load/Save Random Seed...
- Starting Create System Users...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- Starting Helper to synchronize boot up for ifupdown...
- [ 6.575854] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ 6.631488] systemd-journald[340]: Received request to flush runtime journal1
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Raise network interfaces...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started Set console font and keymap.
- [ 6.787414] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply cx not four
- Starting 6.797805] qcom_q6v5_pas remoteproc-adsp: re9mCreate Volat.
- [ 6.813540] ath10k_snoc 18800000.wifi: Adding to iommu group 6
- [ 6.819923] qcom,slim-ngd-ctrl 171c0000.slim: Adding to iommu group 5
- [ 6.827000] NET: Registered protocol family 42
- [ 6.827205] qcom,slim-ngd qcom,slim-ngd.1: DMA mask not set
- [ 6.832230] remoteproc remoteproc0: remoteproc-adsp is available
- [ OK 6.844474] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp sum] Starte.
- [ 6.887449] remoteproc remoteproc0: powering up remoteproc-adsp
- [ 6.887488] remoteproc remoteproc2: powering up remoteproc-cdsp
- [ 6.894239] remoteproc remoteproc0: Booting fw image qcom/sdm845/adsp.mdt, s2
- [ 6.900217] remoteproc remoteproc2: Booting fw image qcom/sdm845/cdsp.mdt, s2
- Starting Update UTMP about System Boot/Shutdown...
- [ 6.938139] media: Linux media interface: v0.10
- [ 6.952731] videodev: Linux video capture interface: v2.00
- Starting Network Time Synchronization...
- [ 6.967774] ax88179_178a 4-3:1.0 eth0: register 'ax88179_178a' at usb-0000:01
- [ 6.985759] qcom-venus aa00000.video-codec: Adding to iommu group 7
- [ 6.994993] remoteproc remoteproc2: remote processor remoteproc-cdsp is now p
- [ 7.002551] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@1:8
- [ 7.002683] msm-snd-sdm845 sound: error getting cpu dai name
- [ 7.017549] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@2:9
- [ 7.018508] msm-snd-sdm845 sound: Error parsing OF data
- [ 7.024442] adreno 5000000.gpu: Adding to iommu group 10
- [ 7.034879] msm ae00000.mdss: Adding to iommu group 11
- [ OK ] Started 7.044751] qcom,fastrpc-cb remotep39mNetwork Time [ 7.04.
- [ 7.070834] msm_dsi_manager_register: failed to register mipi dsi host for D0
- [ 7.078546] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm])7
- [ 7.086936] msm ae00000.mdss: master bind failed: -517
- [ 7.092383] remoteproc remoteproc0: remote processor remoteproc-adsp is now p
- [ 7.097363] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@4:3
- [ 7.101202] Bluetooth: Core ver 2.22
- [[ 7.113154] NET: Registered protocol family 31
- OK 7.117963] Bluetooth: HCI device and connectionm] Started 7.129414.
- [ 7.161090] Bluetooth: HCI UART driver ver 2.3
- [ 7.165824] Bluetooth: HCI UART protocol H4 registered
- [ 7.171184] Bluetooth: HCI UART protocol BCSP registered
- [ 7.171555] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@5:4
- [ 7.176613] Bluetooth: HCI UART protocol LL registered
- [ 7.176627] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 7.176836] Bluetooth: HCI UART protocol Broadcom registered
- [ 7.192026] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@6:5
- [ 7.197861] Bluetooth: HCI UART protocol QCA registered
- [ 7.199429] Bluetooth: hci0: setting up wcn3990
- [ 7.213715] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@7:6
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ 7.239534] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@8:7
- [ 7.259530] msm-snd-sdm845 sound: error getting cpu dai name
- [ 7.265325] msm-snd-sdm845 sound: Error parsing OF data
- [ OK ] Found device /dev/ttyMSM0.
- [ 7.283832] usb 4-4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
- [ 7.286927] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.298131] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dur
- [ 7.309414] msm_dsi_manager_register: failed to register mipi dsi host for D0
- [ 7.317771] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm])7
- [ 7.326994] usb 4-4: config 1 has an invalid interface number: 8 but max is 3
- [ 7.327135] msm ae00000.mdss: master bind failed: -517
- [ 7.334215] usb 4-4: config 1 has no interface number 1
- [ 7.344878] lt9611 10-003b: LT9611 revsion: 0xe1
- [ 7.357731] msm-snd-sdm845 sound: error getting cpu dai name
- [ 7.364419] msm-snd-sdm845 sound: Error parsing OF data
- [ 7.384898] qcom,fastrpc-cb remoteproc-adsp:glink-edge:fastrpc:compute-cb@3:8
- [ 7.396474] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.408410] usbcore: registered new interface driver qcserial
- [ 7.410130] qcom,fastrpc-cb remoteproc-adsp:glink-edge:fastrpc:compute-cb@4:9
- [ 7.414260] usbserial: USB Serial support registered for Qualcomm USB modem
- [ 7.431640] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dur
- [ 7.433267] ax88179_178a 4-3:1.0 enx000ec6817901: renamed from eth0
- [ 7.441865] qcserial 4-4:1.0: Qualcomm USB modem converter detected
- [ 7.442999] msm ae00000.mdss: bound ae94000.dsi (ops dsi_ops [msm])
- [ 7.445539] adreno 5000000.gpu: 5000000.gpu supply vdd not found, using dummr
- [ 7.445977] adreno 5000000.gpu: 5000000.gpu supply vddcx not found, using dur
- [ 7.447068] msm ae00000.mdss: [drm:msm_gpu_init [msm]] A630: using IOMMU
- [ 7.453374] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB0
- [ 7.466327] platform 506a000.gmu: Adding to iommu group 20
- [ 7.498742] qcserial 4-4:1.2: Qualcomm USB modem converter detected
- [ 7.499456] msm ae00000.mdss: bound 5000000.gpu (ops a3xx_ops [msm])
- [ 7.505480] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB1
- [ 7.512476] msm_dpu ae01000.mdp: [drm:msm_ioremap [msm]] *ERROR* failed to gt
- [ 7.528237] msm_dpu ae01000.mdp: [drm:msm_ioremap [msm]] *ERROR* failed to ga
- [ 7.537846] [drm:dpu_kms_hw_init:856] dpu hardware revision:0x40000000
- [ 7.549056] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 7.555811] qcserial 4-4:1.3: Qualcomm USB modem converter detected
- [ 7.556027] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB2
- [ 7.562219] [drm] No driver support for vblank timestamp query.
- [ 7.581986] [drm] Initialized msm 1.5.0 20130625 for ae00000.mdss on minor 0
- [ 7.590241] [drm] Cannot find any crtc or sizes
- [ 7.605784] msm-snd-sdm845 sound: error getting cpu dai name
- [ 7.607009] Bluetooth: hci0: QCA controller version 0x02140201
- [ 7.611675] msm-snd-sdm845 sound: Error parsing OF data
- [ 7.617467] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
- [ 7.622962] bluetooth hci0: Direct firmware load for qca/crbtfw21.tlv failed2
- [ 7.622971] Bluetooth: hci0: QCA Failed to request file: qca/crbtfw21.tlv (-)
- [ 7.622974] Bluetooth: hci0: QCA Failed to download patch (-2)
- [ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Trigger anacron every hour.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily apt download activities.
- [ OK ] Reached target Basic System.
- [ OK ] Started D-Bus System Message Bus.
- Starting Bluetooth service...
- [ OK ] Started QIPCRTR Name Service.
- [ 8.160712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 8.166127] Bluetooth: BNEP filters: protocol multicast
- [ 8.166141] Bluetooth: BNEP socket layer initialized
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started Run anacron jobs.
- Starting Network Manager...
- Starting LSB: Load kernel ��…d to enable cpufreq scaling...
- Starting System Logging Service...
- [ OK ] Started Qualcomm PD mapper service.
- [ OK ] Started QRTR TFTP service.
- Starting Login Service...
- Starting Initialize hardware monitoring sensors...
- Starting WPA supplicant...
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Started Qualcomm remotefs service.
- [ 8.394479] remoteproc remoteproc1: powering up 4080000.remoteproc
- [ 8.403140] remoteproc remoteproc1: Booting fw image qcom/sdm845/mba.mbn, si0
- [ OK ] Started System Logging Service.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Started Initialize hardware monitoring sensors.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ 8.478793] qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss
- Starting Hostname Service...
- [ OK ] Started Bluetooth service.
- [ OK ] Started Login Service.
- [ OK ] Started Network Manager.
- [ OK ] Started WPA supplicant.
- [ OK ] Started LSB: Load kernel m��…ded to enable cpufreq scaling.
- [ OK ] Started Hostname Service.
- [ 8.624716] [drm] Cannot find any crtc or sizes
- Starting Network Manager Script Dispatcher Service...
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Reached target Network.
- Starting Permit User Sessions...
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [ 8.724393] remoteproc remoteproc1: remote processor 4080000.remoteproc is np
- [ 8.734967] msm-snd-sdm845 sound: error getting cpu dai name
- [ 8.741436] msm-snd-sdm845 sound: Error parsing OF data
- [ 8.754075] msm-snd-sdm845 sound: error getting cpu dai name
- Starting 8.760457] msm-snd-sdm845 sound: E9mOpenBSD Secure Shell server...
- Starting /etc/rc.local Compatibility...
- [ OK ] Reached target Bluetooth.
- [ OK ] Started Permit User Sessions.
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started Serial Getty on ttyMSM0.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [ 10.119138] ath10k_snoc 18800000.wifi: msa info req rejected: 90
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- Debian GNU/Linux 10 linaro-developer ttyMSM0
- linaro-developer login: root (automatic login)
- Last login: Thu Feb 14 10:12:06 UTC 2019 on ttyMSM0
- Linux linaro-developer 5.2.0-qcomlt-arm64 #71 SMP PREEMPT Thu Nov 14 00:56:03 U4
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Stopped Advanced IEEE 802.��…1X/WPA/WPA2/EAP Authenticator.
- Starting Advanced IEEE 802��…/WPA/WPA2/EAP Authenticator...
- [FAILED] Failed to start Advanced I��…1X/WPA/WPA2/EAP Authenticator.
- See 'systemctl status hostapd.service' for details.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
Add Comment
Please, Sign In to add comment