SHARE
TWEET

Untitled

a guest Nov 7th, 2014 149 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. OpenELEC (official) Version: 4.95.1
  2. OpenELEC:~ # dmesg
  3. [    0.000000] Booting Linux on physical CPU 0x0
  4. [    0.000000] Linux version 3.17.2 (stephan@buildserver.fritz.box) (gcc version 4.9.2 (GCC) ) #1 PREEMPT Tue Nov 4 23:54:47 CET 2014
  5. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  7. [    0.000000] Machine: BCM2708
  8. [    0.000000] cma: Reserved 8 MiB at 17800000
  9. [    0.000000] Memory policy: Data cache writeback
  10. [    0.000000] On node 0 totalpages: 98304
  11. [    0.000000] free_area_init_node: node 0, pgdat c0a09c54, node_mem_map d74f4000
  12. [    0.000000]   Normal zone: 768 pages used for memmap
  13. [    0.000000]   Normal zone: 0 pages reserved
  14. [    0.000000]   Normal zone: 98304 pages, LIFO batch:31
  15. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  16. [    0.000000] pcpu-alloc: [0] 0
  17. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
  18. [    0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708.boardrev=0x1000010 bcm2708.serial=0x472f18d0 smsc95xx.macaddr=B8:27:EB:2F:18:D0 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
  19. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  20. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  21. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  22. [    0.000000] Memory: 370828K/393216K available (6475K kernel code, 266K rwdata, 1468K rodata, 2034K init, 378K bss, 22388K reserved)
  23. [    0.000000] Virtual kernel memory layout:
  24. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  25. [    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
  26. [    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
  27. [    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
  28. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  29. [    0.000000]       .text : 0xc0008000 - 0xc07c9f4c   (7944 kB)
  30. [    0.000000]       .init : 0xc07ca000 - 0xc09c69c4   (2035 kB)
  31. [    0.000000]       .data : 0xc09c8000 - 0xc0a0a888   ( 267 kB)
  32. [    0.000000]        .bss : 0xc0a0a888 - 0xc0a691b0   ( 379 kB)
  33. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [    0.000000] Preemptible hierarchical RCU implementation.
  35. [    0.000000]  Offload RCU callbacks from all CPUs
  36. [    0.000000]  Offload RCU callbacks from CPUs: 0.
  37. [    0.000000] NR_IRQS:394
  38. [    0.000022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  39. [    0.000064] Switching to timer-based delay loop, resolution 1000ns
  40. [    0.000284] Console: colour dummy device 80x30
  41. [    0.000481] console [tty0] enabled
  42. [    0.000505] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.08 BogoMIPS (lpj=3333)
  43. [    0.000527] pid_max: default: 32768 minimum: 301
  44. [    0.000687] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [    0.000710] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  46. [    0.001557] CPU: Testing write buffer coherency: ok
  47. [    0.001950] Setting up static identity map for 0x659198 - 0x6591d0
  48. [    0.004503] devtmpfs: initialized
  49. [    0.022088] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  50. [    0.023698] xor: measuring software checksum speed
  51. [    0.057085]    arm4regs  :   973.200 MB/sec
  52. [    0.090496]    8regs     :   492.000 MB/sec
  53. [    0.123905]    32regs    :   598.800 MB/sec
  54. [    0.123921] xor: using function: arm4regs (973.200 MB/sec)
  55. [    0.124383] regulator-dummy: no parameters
  56. [    0.125128] NET: Registered protocol family 16
  57. [    0.130582] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  58. [    0.131483] cpuidle: using governor ladder
  59. [    0.131516] cpuidle: using governor menu
  60. [    0.131959] bcm2708.uart_clock = 3000000
  61. [    0.134398] mailbox: Broadcom VideoCore Mailbox driver
  62. [    0.134502] bcm2708_vcio: mailbox at f200b880
  63. [    0.134621] bcm_power: Broadcom power driver
  64. [    0.134639] bcm_power_open() -> 0
  65. [    0.134650] bcm_power_request(0, 8)
  66. [    0.635357] bcm_mailbox_read -> 00000080, 0
  67. [    0.635375] bcm_power_request -> 0
  68. [    0.635523] Serial: AMBA PL011 UART driver
  69. [    0.635694] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  70. [    0.725867] raid6: int32x1     46 MB/s
  71. [    0.783025] raid6: int32x2     70 MB/s
  72. [    0.839653] raid6: int32x4     94 MB/s
  73. [    0.896538] raid6: int32x8     99 MB/s
  74. [    0.896557] raid6: using algorithm int32x8 (99 MB/s)
  75. [    0.896568] raid6: using intx1 recovery algorithm
  76. [    0.897342] SCSI subsystem initialized
  77. [    0.897815] usbcore: registered new interface driver usbfs
  78. [    0.897949] usbcore: registered new interface driver hub
  79. [    0.898180] usbcore: registered new device driver usb
  80. [    0.900184] Switched to clocksource stc
  81. [    0.914192] NET: Registered protocol family 2
  82. [    0.915507] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  83. [    0.915610] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  84. [    0.915709] TCP: Hash tables configured (established 4096 bind 4096)
  85. [    0.915790] TCP: reno registered
  86. [    0.915815] UDP hash table entries: 256 (order: 0, 4096 bytes)
  87. [    0.915847] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  88. [    0.916181] NET: Registered protocol family 1
  89. [    0.916684] RPC: Registered named UNIX socket transport module.
  90. [    0.916708] RPC: Registered udp transport module.
  91. [    0.916718] RPC: Registered tcp transport module.
  92. [    0.916727] RPC: Registered tcp NFSv4.1 backchannel transport module.
  93. [    1.099922] bcm2708_dma: DMA manager at f2007000
  94. [    1.100111] bcm2708_gpio: bcm2708_gpio_probe c09d4770
  95. [    1.100644] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  96. [    1.102060] futex hash table entries: 256 (order: -1, 3072 bytes)
  97. [    1.117713] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  98. [    1.120684] NFS: Registering the id_resolver key type
  99. [    1.120780] Key type id_resolver registered
  100. [    1.120796] Key type id_legacy registered
  101. [    1.120848] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  102. [    1.123248] JFS: nTxBlock = 2961, nTxLock = 23688
  103. [    1.124984] SGI XFS with security attributes, no debug enabled
  104. [    1.129137] msgmni has been set to 740
  105. [    1.132719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  106. [    1.132772] io scheduler noop registered (default)
  107. [    1.132801] io scheduler deadline registered
  108. [    1.132871] io scheduler cfq registered
  109. [    1.134452] BCM2708FB: allocated DMA memory 57c00000
  110. [    1.134519] BCM2708FB: allocated DMA channel 0 @ f2007000
  111. [    1.160419] Console: switching to colour frame buffer device 200x75
  112. [    1.181801] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  113. [    1.182171] uart-pl011 dev:f1: no DMA platform data
  114. [    1.182209] vc-cma: Videocore CMA driver
  115. [    1.182220] vc-cma: vc_cma_base      = 0x00000000
  116. [    1.182230] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  117. [    1.182240] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  118. [    1.192941] brd: module loaded
  119. [    1.193199] loop: module loaded
  120. [    1.193661] nbd: registered device at major 43
  121. [    1.204365] vchiq: vchiq_init_state: slot_zero = 0xd7800000, is_master = 0
  122. [    1.205426] Loading iSCSI transport class v2.0-870.
  123. [    1.206239] iscsi: registered transport (tcp)
  124. [    1.207487] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
  125. [    1.208390] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
  126. [    1.208552] tun: Universal TUN/TAP device driver, 1.6
  127. [    1.208568] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  128. [    1.209008] PPP generic driver version 2.4.2
  129. [    1.209668] usbcore: registered new interface driver smsc95xx
  130. [    1.209861] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  131. [    1.410097] Core Release: 2.80a
  132. [    1.410132] Setting default values for core params
  133. [    1.410235] Finished setting default values for core params
  134. [    1.610514] Using Buffer DMA mode
  135. [    1.610539] Periodic Transfer Interrupt Enhancement - disabled
  136. [    1.610552] Multiprocessor Interrupt Enhancement - disabled
  137. [    1.610564] OTG VER PARAM: 0, OTG VER FLAG: 0
  138. [    1.610580] Dedicated Tx FIFOs mode
  139. [    1.610977] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd7c14000 dma = 0x57c14000 len=9024
  140. [    1.611013] FIQ FSM acceleration enabled for :
  141. [    1.611013] Non-periodic Split Transactions
  142. [    1.611013] Periodic Split Transactions
  143. [    1.611013] High-Speed Isochronous Endpoints
  144. [    1.611041] dwc_otg: Microframe scheduler enabled
  145. [    1.611102] WARN::hcd_init:473: FIQ at 0xc04fdd1c
  146. [    1.611122] WARN::hcd_init:474: FIQ ASM at 0xc04fdff8 length 36
  147. [    1.611154] WARN::hcd_init:500: MPHI regs_base at 0xd89c4000
  148. [    1.611188] dwc_otg bcm2708_usb: DWC OTG Controller
  149. [    1.611246] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  150. [    1.611306] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  151. [    1.611348] Init: Port Power? op_state=1
  152. [    1.611359] Init: Power Port (0)
  153. [    1.611694] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  154. [    1.611719] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  155. [    1.611735] usb usb1: Product: DWC OTG Controller
  156. [    1.611749] usb usb1: Manufacturer: Linux 3.17.2 dwc_otg_hcd
  157. [    1.611762] usb usb1: SerialNumber: bcm2708_usb
  158. [    1.612697] hub 1-0:1.0: USB hub found
  159. [    1.612783] hub 1-0:1.0: 1 port detected
  160. [    1.613335] dwc_otg: FIQ enabled
  161. [    1.613353] dwc_otg: NAK holdoff enabled
  162. [    1.613363] dwc_otg: FIQ split-transaction FSM enabled
  163. [    1.613430] Module dwc_common_port init
  164. [    1.613944] usbcore: registered new interface driver uas
  165. [    1.614187] usbcore: registered new interface driver usb-storage
  166. [    1.614622] mousedev: PS/2 mouse device common for all mice
  167. [    1.614904] i2c /dev entries driver
  168. [    1.615099] bcm2708_i2c_init_pinmode(0,0)
  169. [    1.615116] bcm2708_i2c_init_pinmode(0,1)
  170. [    1.615511] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
  171. [    1.615582] bcm2708_i2c_init_pinmode(1,2)
  172. [    1.615596] bcm2708_i2c_init_pinmode(1,3)
  173. [    1.616361] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
  174. [    1.617483] bcm2835-cpufreq: min=700000 max=700000
  175. [    1.617956] sdhci: Secure Digital Host Controller Interface driver
  176. [    1.617975] sdhci: Copyright(c) Pierre Ossman
  177. [    1.618167] DMA channels allocated for the MMC driver
  178. [    1.643579] Load BCM2835 MMC driver
  179. [    1.643896] sdhci-pltfm: SDHCI platform and OF driver helper
  180. [    1.644419] hidraw: raw HID events driver (C) Jiri Kosina
  181. [    1.654359] usbcore: registered new interface driver usbhid
  182. [    1.654383] usbhid: USB HID core driver
  183. [    1.654805] TCP: cubic registered
  184. [    1.656267] NET: Registered protocol family 10
  185. [    1.662151] NET: Registered protocol family 17
  186. [    1.664501] Key type dns_resolver registered
  187. [    1.675961] Btrfs loaded
  188. [    1.684067] Freeing unused kernel memory: 2032K (c07ca000 - c09c6000)
  189. [    1.695397] mmc0: host does not support reading read-only switch. assuming write-enable.
  190. [    1.697628] mmc0: new high speed SDHC card at address 1234
  191. [    1.700480] mmcblk0: mmc0:1234 SA08G 7.21 GiB
  192. [    1.702869]  mmcblk0: p1 p2
  193. [    1.810411] Indeed it is in host mode hprt0 = 00021501
  194. [    2.020395] usb 1-1: new high-speed USB device number 2 using dwc_otg
  195. [    2.020602] Indeed it is in host mode hprt0 = 00001101
  196. [    2.244058] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  197. [    2.244112] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  198. [    2.245134] hub 1-1:1.0: USB hub found
  199. [    2.245301] hub 1-1:1.0: 5 ports detected
  200. [    2.523767] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  201. [    2.617399] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  202. [    2.617436] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  203. [    2.620558] smsc95xx v1.0.4
  204. [    2.668580] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2f:18:d0
  205. [    2.747129] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
  206. [    2.847153] usb 1-1.4: New USB device found, idVendor=046e, idProduct=5578
  207. [    2.847192] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  208. [    2.847209] usb 1-1.4: Product: USB MCE Cordless Remote Control.
  209. [    2.847223] usb 1-1.4: Manufacturer: BTC
  210. [    2.853074] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046E:5578.0001/input/input0
  211. [    2.857468] topseed 0003:046E:5578.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input0
  212. [    2.873831] input: BTC USB MCE Cordless Remote Control. as /devices/platform/bcm2708_usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046E:5578.0002/input/input1
  213. [    2.874971] topseed 0003:046E:5578.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [BTC USB MCE Cordless Remote Control.] on usb-bcm2708_usb-1.4/input1
  214. [    3.012040] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  215. [    3.013324] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  216. [    3.065808] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  217. [    3.553561] random: nonblocking pool is initialized
  218. [    4.107862] systemd[1]: Found ordering cycle on systemd-tmpfiles-setup.service/start
  219. [    4.107971] systemd[1]: Breaking ordering cycle by deleting job systemd-journal-flush.service/start
  220. [    4.108041] systemd[1]: Job systemd-journal-flush.service/start deleted to break ordering cycle starting with systemd-tmpfiles-setup.service/start
  221. [    4.837441] bcm2708_rng_init=d8a68000
  222. [    5.788526] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CPU DAI bcm2708-i2s.0 not registered
  223. [    5.793740] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  224. [    5.793812] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  225. [    5.834651] lirc_dev: IR Remote Control driver registered, major 248
  226. [    5.849533] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
  227. [    5.854698] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CPU DAI bcm2708-i2s.0 not registered
  228. [    5.854803] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  229. [    5.854853] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  230. [    6.747022] lirc_rpi: auto-detected active high receiver on GPIO pin 18
  231. [    6.747529] lirc_rpi lirc_rpi.0: lirc_dev: driver lirc_rpi registered at minor = 0
  232. [    6.747552] lirc_rpi: driver registered!
  233. [    8.439830] Console: switching to colour dummy device 80x30
  234. [    9.112745] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  235. [    9.112842] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  236. [    9.112890] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  237. [    9.163425] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  238. [    9.163683] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  239. [    9.163740] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  240. [    9.181045] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: ASoC: CODEC pcm512x.1-004d not registered
  241. [    9.181136] snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
  242. [    9.181249] platform snd-rpi-hifiberry-dacplus.0: Driver snd-rpi-hifiberry-dacplus requests probe deferral
  243. [    9.183442] pcm512x 1-004d: Failed to get supply 'AVDD': -517
  244. [    9.183478] pcm512x 1-004d: Failed to get supplies: -517
  245. [    9.200372] i2c 1-004d: Driver pcm512x requests probe deferral
  246. [    9.200682] pcm512x 1-004c: Failed to get supply 'AVDD': -517
  247. [    9.200706] pcm512x 1-004c: Failed to get supplies: -517
  248. [    9.200832] i2c 1-004c: Driver pcm512x requests probe deferral
  249. [   12.197070] input: eventlircd as /devices/virtual/input/input2
  250. [   14.170352] input: lircd as /devices/virtual/input/input4
  251. [   14.283982] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  252. [   14.284966] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  253. [   15.702947] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  254. [   15.730784] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top