Guest User

Untitled

a guest
Jul 27th, 2022
933
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.68 KB | None | 0 0
  1. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.14-zen1-1-zen] (local build)
  2. Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: WDC WD80EDAZ-11TA3A0
  6. Serial Number: VGGG3ETG
  7. LU WWN Device Id: 5 000cca 0bec66a20
  8. Firmware Version: 81.00A81
  9. User Capacity: 8,001,563,222,016 bytes [8.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 5400 rpm
  12. Form Factor: 3.5 inches
  13. Device is: Not in smartctl database 7.3/5319
  14. ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Wed Jul 27 14:03:25 2022 PDT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 87) seconds.
  32. Offline data collection
  33. capabilities: (0x5b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. No Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 855) minutes.
  50. SCT capabilities: (0x003d) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
  59. 2 Throughput_Performance 0x0004 127 127 054 Old_age Offline - 112
  60. 3 Spin_Up_Time 0x0007 244 244 024 Pre-fail Always - 190 (Average 476)
  61. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2222
  62. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
  63. 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0
  64. 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
  65. 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 6411
  66. 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1965
  68. 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3217
  69. 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3217
  70. 194 Temperature_Celsius 0x0002 116 116 000 Old_age Always - 56 (Min/Max 11/61)
  71. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
  72. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 2
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 2
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 2 occurred at disk power-on lifetime: 5666 hours (236 days + 2 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. 61 c0 58 40 95 4b 40 08 1d+02:23:41.599 WRITE FPDMA QUEUED
  104. 61 88 68 40 9d 4b 40 08 1d+02:23:41.590 WRITE FPDMA QUEUED
  105. 61 40 60 00 98 4b 40 08 1d+02:23:41.587 WRITE FPDMA QUEUED
  106. 61 40 50 00 90 4b 40 08 1d+02:23:41.583 WRITE FPDMA QUEUED
  107. 61 c0 48 40 8d 4b 40 08 1d+02:23:41.582 WRITE FPDMA QUEUED
  108.  
  109. Error 1 occurred at disk power-on lifetime: 4258 hours (177 days + 10 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. 60 00 28 10 38 54 40 00 17:18:06.564 READ FPDMA QUEUED
  121. 60 00 50 10 3d 54 40 00 17:18:06.564 READ FPDMA QUEUED
  122. 60 00 48 10 3c 54 40 00 17:18:06.564 READ FPDMA QUEUED
  123. 60 00 40 10 3b 54 40 00 17:18:06.564 READ FPDMA QUEUED
  124. 60 00 38 10 3a 54 40 00 17:18:06.564 READ FPDMA QUEUED
  125.  
  126. SMART Self-test log structure revision number 1
  127. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  128.  
  129. SMART Selective self-test log data structure revision number 1
  130. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  131. 1 0 0 Not_testing
  132. 2 0 0 Not_testing
  133. 3 0 0 Not_testing
  134. 4 0 0 Not_testing
  135. 5 0 0 Not_testing
  136. Selective self-test flags (0x0):
  137. After scanning selected spans, do NOT read-scan remainder of disk.
  138. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment