HELLO! BOOT0 is starting!
boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f

boot0 version : 4.0.0
set pll start
set pll end
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
DRAM driver version: V1.1
rsb_send_initseq: rsb clk 400Khz -> 3Mhz
PMU: AXP81X
ddr voltage = 1500 mv
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM clk = 672 MHz
DRAM zq value: 003b3bbb
DRAM single rank full DQ OK
DRAM size = 1024 MB
DRAM init ok
dram size =1024
card boot number = 0, boot0 copy = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-05-08 20:06
[mmc]: sdc0 spd mode error, 2
[mmc]: Wrong media type 0x00000000
[mmc]: ***Try SD card 0***
[mmc]: HSSDR52/SDR25 4 bit
[mmc]: 50000000 Hz
[mmc]: 15180 MB
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000e8000.
sum=d8f203f5
src_sum=d8f203f5
Succeed in loading uboot from sdmmc flash.
boot0: start load other image
boot0: Loading BL3-1
Loading file 0 at address 0x40000000,size 0x0000a200 success
boot0: Loading scp
Loading file 2 at address 0x00040000,size 0x00019a00 success
set arisc reset to de-assert state
Ready to disable icache.
�  Configuring SPC Controller
NOTICE:  BL3-1: v1.0(debug):3cdc5c3
NOTICE:  BL3-1: Built : 19:43:44, Oct 23 2017
INFO:    BL3-1: Initializing runtime services
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x4a000000
INFO:    BL3-1: Next image spsr = 0x1d3


U-Boot 2014.07 (Nov 16 2017 - 02:53:08) Allwinner Technology

uboot commit : 6f37e5cf6a65b0b10455d12dbd631effabe765ec

rsb: secure monitor exist
[      0.363]pmbus:   ready
[      0.365][ARISC] :arisc initialize
[      0.695][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :arisc_para size:1a8
[SCP] :arisc version: [v0.1.76]
[SCP] :sunxi-arisc driver v1.10 is starting
[      0.824][ARISC] :sunxi-arisc driver startup succeeded
[      0.857]PMU: AXP81X
[      0.859]PMU: AXP81X found
bat_vol=259, ratio=100
[      0.866]PMU: dcdc2 1100
[      0.869]PMU: cpux 1008 Mhz,AXI=336 Mhz
PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
device_type = 3253, onoff=1
dcdc1_vol = 3300, onoff=1
dcdc2_vol = 1100, onoff=1
dcdc6_vol = 1100, onoff=1
aldo1_vol = 2800, onoff=0
aldo2_vol = 1800, onoff=1
aldo3_vol = 3000, onoff=1
dldo1_vol = 3300, onoff=0
dldo2_vol = 3300, onoff=0
dldo3_vol = 2800, onoff=0
dldo4_vol = 3300, onoff=1
eldo1_vol = 1800, onoff=1
eldo2_vol = 1800, onoff=0
eldo3_vol = 1800, onoff=0
fldo1_vol = 1200, onoff=0
fldo2_vol = 1100, onoff=1
gpio0_vol = 3100, onoff=0
vbus not exist
no battery, limit to dc
run key detect
no key found
no uart input
DRAM:  1008 MiB
fdt addr: 0x76ebcf00
Relocation Offset is: 35f0f000
In:    serial
Out:   serial
Err:   serial
gic: sec monitor mode
[      1.679]start
drv_disp_init
init_clocks: finish init_clocks.
enable power vcc-hdmi-33, ret=0
drv_disp_init finish
boot_disp.output_disp=0
boot_disp.output_type=3
boot_disp.output_mode=10
fetch script data boot_disp.auto_hpd fail
disp0 device type(4) enable
attched ok, mgr0<-->device1, type=4, mode=10
plugin
[      2.718]end
workmode = 0,storage type = 1
[      2.722]MMC:        0
[mmc]: mmc driver ver 2015-06-03 13:50:00
SUNXI SD/MMC: 0
[mmc]: start mmc_calibrate_delay_unit, don't access device...
[mmc]: delay chain cal done, sample: 192(ps)
[mmc]: media type 0x0
[mmc]: Wrong media type 0x0
[mmc]: ************Try SD card 0************
[mmc]: host caps: 0x27
[mmc]: MID 15 PSN 65a87943
[mmc]: PNM NCard -- 0x4e-43-61-72-64
[mmc]: PRV 1.0
[mmc]: MDT m-12 y-2016
[mmc]: speed mode     : HSSDR52/SDR25
[mmc]: clock          : 50000000 Hz
[mmc]: bus_width      : 4 bit
[mmc]: user capacity  : 15180 MB
[mmc]: ************SD/MMC 0 init OK!!!************
[mmc]: erase_grp_size      : 0x1WrBlk*0x200=0x200 Byte
[mmc]: secure_feature      : 0x0
[mmc]: secure_removal_type : 0x0
[      2.910]sunxi flash init ok

** Unable to use mmc 0:1 for loading the env **
Using default environment

--------fastboot partitions--------
mbr not exist
base bootcmd=run mmcbootcmd
bootcmd set setargs_mmc
key 0
recovery key high 12, low 10
fastboot key high 6, low 4
no misc partition is found
to be run cmd=run mmcbootcmd
update dtb dram start
update dtb dram  end
serial is: 840051900800480f01cb
check for ANX9807
get Pine64 model from DRAM size
DRAM >512M
Pine64 model: pine64-plus
no battery exist
sunxi bmp: unable to open file /boot/bootlogo.bmp
[      3.171]inter uboot shell
autoboot in 3 seconds, Press s or <Esc><Esc> to abort
4707 bytes read in 14 ms (328.1 KiB/s)
Booting with script ...
## Executing script at 41000000
166 bytes read in 11 ms (14.6 KiB/s)
68724 bytes read in 18 ms (3.6 MiB/s)
3830065 bytes read in 218 ms (16.8 MiB/s)
12655640 bytes read in 666 ms (18.1 MiB/s)
Image lacks image_size field, assuming 16MiB
## Loading init Ramdisk from Legacy Image at 45300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    3830001 Bytes = 3.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 45000000
   Booting using the fdt blob at 0x45000000
   reserving fdt memory region: addr=41010000 size=10000
   reserving fdt memory region: addr=41020000 size=800
   reserving fdt memory region: addr=40100000 size=4000
   reserving fdt memory region: addr=40104000 size=1000
   reserving fdt memory region: addr=40105000 size=1000
   reserving fdt memory region: addr=45000000 size=11000
   Loading Ramdisk to 76b0f000, end 76eb60f1 ... OK
   Loading Device Tree to 44feb000, end 44ffefff ... OK

Starting kernel ...

[mmc]: MMC Device 2 not found
[mmc]: mmc 2 not find, so not exit
INFO:    BL3-1: Next image address = 0x41080000
INFO:    BL3-1: Next image spsr = 0x3c9
Loading, please wait...
starting version 232
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1: clean, 106894/215568 files, 628209/861184 blocks
done.
[   37.048947] BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:1:35]
[   37.057550] Call trace:
[   37.060315] Call trace:
[   37.063069] Call trace:
[   37.065837] Call trace:
[   37.068599] Call trace:
[   37.071360] Call trace:
[   37.074118] Call trace:
[   37.076876] Call trace:
[   37.079634] Call trace:
[   37.082394] Call trace:
[   37.085159] Call trace:
[   37.087917] Call trace:
[   37.090675] Call trace:
[   37.093433] Call trace:
[   37.096190] Call trace:
[   37.098948] Call trace:
[   37.101706] Call trace:
[   37.104466] Call trace:
[   37.107227] Call trace:
[   37.109985] Call trace:
[   37.112742] Call trace:
[   37.115500] Call trace:
[   37.118258] Call trace:
[   37.121018] Call trace:
[   37.123778] Call trace:
[   37.126536] Call trace:
[   37.129293] Call trace:
[   37.132051] Call trace:
[   37.134809] Call trace:
[   37.137569] Call trace:
[   37.140329] Call trace:
[   37.143090] Call trace:
[   37.145849] Call trace:
[   37.148610] Call trace:
[   37.151377] Call trace:
[   37.154479] Call trace:
[   37.157283] Call trace:
[   37.160043] Call trace:
[   37.162804] Call trace:
[   37.165565] Call trace:
[   37.168325] Call trace:
[   37.171085] Call trace:
[   37.173845] Call trace:
[   37.176604] Call trace:
[   37.180076] Call trace:
[   37.183438] Call trace:
[   37.186796] Call trace:
[   37.190293] Call trace:
[   37.193654] Call trace:
[   37.197013] Call trace:
[   37.200377] Call trace:
[   37.203738] Call trace:
[   37.207100] Call trace:
[   37.210462] Call trace:
[   37.213828] Call trace:
[   37.217194] Call trace:
[   37.220557] Call trace:
[   37.223919] Call trace:
[   37.227289] Call trace:
[   37.230681] Call trace:
[   37.234045] Call trace:
[   37.237402] Call trace:
[   37.240763] Call trace:
[   37.244125] Call trace:
[   37.247488] Call trace:
[   37.250847] Call trace:
[   37.254209] Call trace:
[   37.257575] Call trace:
[   37.260938] Call trace:
[   37.264302] Call trace:
[   37.267667] Call trace:
[   37.271046] Call trace:
[   37.274411] Call trace:
[   37.277779] Call trace:
[   37.281147] Call trace:
[   37.284527] Call trace:
[   37.287893] Call trace:
[   64.600944] BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:1:35]
[   64.610233] Call trace:
[   64.613805] Call trace:
[   64.617368] Call trace:
[   64.620944] Call trace:
[   64.624517] Call trace:

...
Endless loop