daily pastebin goal
49%
SHARE
TWEET

Untitled

a guest Oct 3rd, 2017 457 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. net usershare' returned error 255: net usershare add: cannot convert name "Everyone" to a SID. Access denied.
  2.    
  3. # Sample configuration file for the Samba suite for Debian GNU/Linux.
  4. #
  5. #
  6. # This is the main Samba configuration file. You should read the
  7. # smb.conf(5) manual page in order to understand the options listed
  8. # here. Samba has a huge number of configurable options most of which
  9. # are not shown in this example
  10. #
  11. # Some options that are often worth tuning have been included as
  12. # commented-out examples in this file.
  13. #  - When such options are commented with ";", the proposed setting
  14. #    differs from the default Samba behaviour
  15. #  - When commented with "#", the proposed setting is the default
  16. #    behaviour of Samba but the option is considered important
  17. #    enough to be mentioned here
  18. #
  19. # NOTE: Whenever you modify this file you should run the command
  20. # "testparm" to check that you have not made any basic syntactic
  21. # errors.
  22. #======================= Global Settings =======================
  23. [global]
  24. ## Browsing/Identification ###
  25. # Change this to the workgroup/NT-domain name your Samba server will part of
  26.     workgroup = workgroup
  27. # server string is the equivalent of the NT Description field
  28.     server string = %h server (Samba, Ubuntu)
  29. # Windows Internet Name Serving Support Section:
  30. # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
  31. #   wins support = no
  32. # WINS Server - Tells the NMBD components of Samba to be a WINS Client
  33. # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
  34. ;   wins server = w.x.y.z
  35. # This will prevent nmbd to search for NetBIOS names through DNS.
  36.     dns proxy = no
  37.     force user = arka
  38.     force group = arka
  39. #### Networking ####
  40. # The specific set of interfaces / networks to bind to
  41. # This can be either the interface name or an IP address/netmask;
  42. # interface names are normally preferred
  43. ;   interfaces = 127.0.0.0/8 eth0
  44. # Only bind to the named interfaces and/or networks; you must use the
  45. # 'interfaces' option above to use this.
  46. # It is recommended that you enable this feature if your Samba machine is
  47. # not protected by a firewall or is a firewall itself.  However, this
  48. # option cannot handle dynamic or non-broadcast interfaces correctly.
  49. ;   bind interfaces only = yes
  50. #### Debugging/Accounting ####
  51. # This tells Samba to use a separate log file for each machine
  52. # that connects
  53.     log file = /var/log/samba/log.%m
  54. # Cap the size of the individual log files (in KiB).
  55.     max log size = 1000
  56. # If you want Samba to only log through syslog then set the following
  57. # parameter to 'yes'.
  58. #   syslog only = no
  59. # We want Samba to log a minimum amount of information to syslog. Everything
  60. # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
  61. # through syslog you should set the following parameter to something higher.
  62.     syslog = 0
  63. # Do something sensible when Samba crashes: mail the admin a backtrace
  64.     panic action = /usr/share/samba/panic-action %d
  65. ####### Authentication #######
  66. # Server role. Defines in which mode Samba will operate. Possible
  67. # values are "standalone server", "member server", "classic primary
  68. # domain controller", "classic backup domain controller", "active
  69. # directory domain controller".
  70. #
  71. # Most people will want "standalone sever" or "member server".
  72. # Running as "active directory domain controller" will require first
  73. # running "samba-tool domain provision" to wipe databases and create a
  74. # new domain.
  75.     server role = standalone server
  76. # If you are using encrypted passwords, Samba will need to know what
  77. # password database type you are using.
  78. ;    passdb backend = tdbsam
  79.     obey pam restrictions = yes
  80. # This boolean parameter controls whether Samba attempts to sync the Unix
  81. # password with the SMB password when the encrypted SMB password in the
  82. # passdb is changed.
  83.     unix password sync = yes
  84. # For Unix password sync to work on a Debian GNU/Linux system, the following
  85. # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
  86. # sending the correct chat script for the passwd program in Debian Sarge).
  87.     passwd program = /usr/bin/passwd %u
  88.     passwd chat = *Entersnews*spassword:* %nn *Retypesnews*spassword:* %nn *passwordsupdatedssuccessfully* .
  89. # This boolean controls whether PAM will be used for password changes
  90. # when requested by an SMB client instead of the program listed in
  91. # 'passwd program'. The default is 'no'.
  92.     pam password change = yes
  93. # This option controls how unsuccessful authentication attempts are mapped
  94. # to anonymous connections
  95.     map to guest = bad user
  96. ########## Domains ###########
  97. #
  98. # The following settings only takes effect if 'server role = primary
  99. # classic domain controller', 'server role = backup domain controller'
  100. # or 'domain logons' is set
  101. #
  102. # It specifies the location of the user's
  103. # profile directory from the client point of view) The following
  104. # required a [profiles] share to be setup on the samba server (see
  105. # below)
  106. ;   logon path = \%Nprofiles%U
  107. # Another common choice is storing the profile in the user's home directory
  108. # (this is Samba's default)
  109. #   logon path = \%N%Uprofile
  110. # The following setting only takes effect if 'domain logons' is set
  111. # It specifies the location of a user's home directory (from the client
  112. # point of view)
  113. ;   logon drive = H:
  114. #   logon home = \%N%U
  115. # The following setting only takes effect if 'domain logons' is set
  116. # It specifies the script to run during logon. The script must be stored
  117. # in the [netlogon] share
  118. # NOTE: Must be store in 'DOS' file format convention
  119. ;   logon script = logon.cmd
  120. # This allows Unix users to be created on the domain controller via the SAMR
  121. # RPC pipe.  The example command creates a user account with a disabled Unix
  122. # password; please adapt to your needs
  123. ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
  124. # This allows machine accounts to be created on the domain controller via the
  125. # SAMR RPC pipe.
  126. # The following assumes a "machines" group exists on the system
  127. ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
  128. # This allows Unix groups to be created on the domain controller via the SAMR
  129. # RPC pipe.
  130. ; add group script = /usr/sbin/addgroup --force-badname %g
  131. ############ Misc ############
  132. # Using the following line enables you to customise your configuration
  133. # on a per machine basis. The %m gets replaced with the netbios name
  134. # of the machine that is connecting
  135. ;   include = /home/samba/etc/smb.conf.%m
  136. # Some defaults for winbind (make sure you're not using the ranges
  137. # for something else.)
  138. ;   idmap uid = 10000-20000
  139. ;   idmap gid = 10000-20000
  140. ;   template shell = /bin/bash
  141. # Setup usershare options to enable non-root users to share folders
  142. # with the net usershare command.
  143. # Maximum number of usershare. 0 (default) means that usershare is disabled.
  144. ;    usershare max shares = 100
  145. # Allow users who've been granted usershare privileges to create
  146. # public shares, not just authenticated ones
  147. ;    usershare allow guests = no
  148. #======================= Share Definitions =======================
  149. # Un-comment the following (and tweak the other settings below to suit)
  150. # to enable the default home directory shares. This will share each
  151. # user's home directory as \serverusername
  152. ;[homes]
  153. ;   comment = Home Directories
  154. ;   browseable = no
  155. # By default, the home directories are exported read-only. Change the
  156. # next parameter to 'no' if you want to be able to write to them.
  157. ;   read only = yes
  158. # File creation mask is set to 0700 for security reasons. If you want to
  159. # create files with group=rw permissions, set next parameter to 0775.
  160.     create mask = 0777
  161. # Directory creation mask is set to 0700 for security reasons. If you want to
  162. # create dirs. with group=rw permissions, set next parameter to 0775.
  163.     directory mask = 0777
  164. # By default, \serverusername shares can be connected to by anyone
  165. # with access to the samba server.
  166. # Un-comment the following parameter to make sure that only "username"
  167. # can connect to \serverusername
  168. # This might need tweaking when using external authentication schemes
  169.     valid users = "asantra"
  170.     username map = /etc/samba/smbusers
  171.     security = user
  172. ;    encrypt passwords = yes
  173.     guest ok = yes
  174. ;    encrypt passwords = yes
  175. ;    guest account = nobody
  176. ;    encrypt passwords = yes
  177. ;    guest account = nobody
  178. ;    encrypt passwords = yes
  179. ;    guest account = nobody
  180. # Un-comment the following and create the netlogon directory for Domain Logons
  181. # (you need to configure Samba to act as a domain controller too.)
  182. ;[netlogon]
  183. ;   comment = Network Logon Service
  184. ;   path = /home/samba/netlogon
  185. ;   guest ok = yes
  186. ;   read only = yes
  187. # Un-comment the following and create the profiles directory to store
  188. # users profiles (see the "logon path" option above)
  189. # (you need to configure Samba to act as a domain controller too.)
  190. # The path below should be writable by all users so that their
  191. # profile directory may be created the first time they log on
  192. ;[profiles]
  193. ;   comment = Users profiles
  194. ;   path = /home/samba/profiles
  195. ;   guest ok = no
  196. ;   browseable = no
  197. ;   create mask = 0600
  198. ;   directory mask = 0700
  199. # Share
  200. ;[arka_laptop]
  201. ;    path = /home/arka/arka
  202. ;    valid users = "asantra"
  203. ;    read only = No
  204. ;    create mask = 0777
  205. ;    directory mask = 0777
  206. ;    guest ok = no
  207. ;[Shares_1]
  208. ;    path = /home/arka/Shares
  209. ;    valid users = "asantra"
  210. ;    read only = No
  211. ;    create mask = 0777
  212. ;    directory mask = 0777
  213. ;    guest ok = no
  214. ;
  215. ;[lmg5]
  216. ;    path = /home/arka/LatestMadGraph5
  217. ;    valid users = "asantra"
  218. ;    read only = No
  219. ;    create mask = 0777
  220. ;    directory mask = 0777
  221. ;    guest ok = no
  222. [printers]
  223.     comment = All Printers
  224.     browseable = no
  225.     path = /var/spool/samba
  226.     printable = yes
  227. ;    guest ok = no
  228. ;    read only = yes
  229.     create mask = 0700
  230. # Windows clients look for this share name as a source of downloadable
  231. # printer drivers
  232. [print$]
  233.     comment = Printer Drivers
  234.     path = /var/lib/samba/printers
  235. ;    browseable = yes
  236. ;    read only = yes
  237. ;    guest ok = no
  238. # Uncomment to allow remote administration of Windows print drivers.
  239. # You may need to replace 'lpadmin' with the name of the group your
  240. # admin users are members of.
  241. # Please note that you also need to set appropriate Unix permissions
  242. # to the drivers directory for these users to have write rights in it
  243. ;   write list = root, @lpadmin
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top