SHARE
TWEET

Untitled

a guest Jul 29th, 2018 58 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Linux version 4.14.58+ (jenkins@vps01) (gcc version 4.9.2 ( 4.9.2-10)) #1 PREEMPT Wed Jul 25 20:21:30 CEST 2018
  3. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  4. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  5. [    0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2
  6. [    0.000000] Memory policy: Data cache writeback
  7. [    0.000000] cma: Reserved 8 MiB at 0x07400000
  8. [    0.000000] On node 0 totalpages: 32768
  9. [    0.000000] free_area_init_node: node 0, pgdat c0bbda98, node_mem_map c7eca100
  10. [    0.000000]   Normal zone: 288 pages used for memmap
  11. [    0.000000]   Normal zone: 0 pages reserved
  12. [    0.000000]   Normal zone: 32768 pages, LIFO batch:7
  13. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  14. [    0.000000] pcpu-alloc: [0] 0
  15. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
  16. [    0.000000] Kernel command line: bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0xec00000 vc_mem.mem_size=0x10000000  telnet zswap.enabled=1 zswap.compressor=lz4 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lzo rootfstype=btrfs rootwait logo.nologo quiet noswap loglevel=0 partswap startevent=mountall selinux=0 splash nohdparm net.ifnames=0 biosdevname=0 --startup-event mountall
  17. [    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  18. [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  19. [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  20. [    0.000000] Memory: 108676K/131072K available (8143K kernel code, 629K rwdata, 2192K rodata, 468K init, 694K bss, 14204K reserved, 8192K cma-reserved)
  21. [    0.000000] Virtual kernel memory layout:
  22.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  23.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  24.                    vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
  25.                    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
  26.                    modules : 0xbf000000 - 0xc0000000   (  16 MB)
  27.                      .text : 0xc0008000 - 0xc07fbf34   (8144 kB)
  28.                      .init : 0xc0ab7000 - 0xc0b2c000   ( 468 kB)
  29.                      .data : 0xc0b2c000 - 0xc0bc94dc   ( 630 kB)
  30.                       .bss : 0xc0bd0374 - 0xc0c7dc7c   ( 695 kB)
  31. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  32. [    0.000000] ftrace: allocating 26059 entries in 77 pages
  33. [    0.000000] Preemptible hierarchical RCU implementation.
  34. [    0.000000]  Tasks RCU enabled.
  35. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  36. [    0.000022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  37. [    0.000046] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  38. [    0.000109] bcm2835: system timer (irq = 27)
  39. [    0.000519] Console: colour dummy device 80x30
  40. [    0.000538] console [tty1] enabled
  41. [    0.000563] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
  42. [    0.040232] pid_max: default: 32768 minimum: 301
  43. [    0.040558] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [    0.040573] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [    0.041483] Disabling memory control group subsystem
  46. [    0.041591] CPU: Testing write buffer coherency: ok
  47. [    0.042453] Setting up static identity map for 0x8200 - 0x8238
  48. [    0.042621] Hierarchical SRCU implementation.
  49. [    0.043667] devtmpfs: initialized
  50. [    0.051214] random: get_random_u32 called from bucket_table_alloc+0x88/0x1c4 with crng_init=0
  51. [    0.052183] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  52. [    0.052481] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  53. [    0.052501] futex hash table entries: 256 (order: -1, 3072 bytes)
  54. [    0.053416] xor: measuring software checksum speed
  55. [    0.150513]    arm4regs  :  1388.400 MB/sec
  56. [    0.250642]    8regs     :   702.400 MB/sec
  57. [    0.350755]    32regs    :   855.600 MB/sec
  58. [    0.350766] xor: using function: arm4regs (1388.400 MB/sec)
  59. [    0.350781] pinctrl core: initialized pinctrl subsystem
  60. [    0.351782] NET: Registered protocol family 16
  61. [    0.354312] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  62. [    0.359604] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  63. [    0.359619] hw-breakpoint: maximum watchpoint size is 4 bytes.
  64. [    0.359707] Serial: AMBA PL011 UART driver
  65. [    0.362119] bcm2835-mbox 2000b880.mailbox: mailbox enabled
  66. [    0.561923] raid6: int32x1  gen()    80 MB/s
  67. [    0.732033] raid6: int32x1  xor()    57 MB/s
  68. [    0.902698] raid6: int32x2  gen()   111 MB/s
  69. [    1.072973] raid6: int32x2  xor()    79 MB/s
  70. [    1.242978] raid6: int32x4  gen()   144 MB/s
  71. [    1.413352] raid6: int32x4  xor()    96 MB/s
  72. [    1.584101] raid6: int32x8  gen()   150 MB/s
  73. [    1.754096] raid6: int32x8  xor()    91 MB/s
  74. [    1.754107] raid6: using algorithm int32x8 gen() 150 MB/s
  75. [    1.754113] raid6: .... xor() 91 MB/s, rmw enabled
  76. [    1.754118] raid6: using intx1 recovery algorithm
  77. [    1.754609] bcm2835-dma 20007000.dma: DMA legacy API manager at c880d000, dmachans=0x1
  78. [    1.756297] SCSI subsystem initialized
  79. [    1.756462] usbcore: registered new interface driver usbfs
  80. [    1.756532] usbcore: registered new interface driver hub
  81. [    1.756669] usbcore: registered new device driver usb
  82. [    1.764155] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-01-17 13:28
  83. [    1.766001] clocksource: Switched to clocksource timer
  84. [    1.848809] VFS: Disk quotas dquot_6.6.0
  85. [    1.848899] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  86. [    1.849121] FS-Cache: Loaded
  87. [    1.849364] CacheFiles: Loaded
  88. [    1.861812] NET: Registered protocol family 2
  89. [    1.862695] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  90. [    1.862721] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  91. [    1.862745] TCP: Hash tables configured (established 1024 bind 1024)
  92. [    1.862856] UDP hash table entries: 256 (order: 0, 4096 bytes)
  93. [    1.862877] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  94. [    1.863131] NET: Registered protocol family 1
  95. [    1.863653] RPC: Registered named UNIX socket transport module.
  96. [    1.863662] RPC: Registered udp transport module.
  97. [    1.863667] RPC: Registered tcp transport module.
  98. [    1.863672] RPC: Registered tcp NFSv4.1 backchannel transport module.
  99. [    1.864876] hw perfevents: no irqs for PMU, sampling events not supported
  100. [    1.864924] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
  101. [    1.868085] workingset: timestamp_bits=14 max_order=15 bucket_order=1
  102. [    1.877204] FS-Cache: Netfs 'nfs' registered for caching
  103. [    1.878174] NFS: Registering the id_resolver key type
  104. [    1.878220] Key type id_resolver registered
  105. [    1.878226] Key type id_legacy registered
  106. [    1.878246] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  107. [    1.883451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  108. [    1.883737] io scheduler noop registered
  109. [    1.883747] io scheduler deadline registered
  110. [    1.884148] io scheduler cfq registered (default)
  111. [    1.884159] io scheduler mq-deadline registered
  112. [    1.884165] io scheduler kyber registered
  113. [    1.885956] BCM2708FB: allocated DMA memory 47500000
  114. [    1.886158] BCM2708FB: allocated DMA channel 0 @ c880d000
  115. [    1.919647] Console: switching to colour frame buffer device 240x67
  116. [    1.950891] bcm2835-rng 20104000.rng: hwrng registered
  117. [    1.951068] vc-mem: phys_addr:0x00000000 mem_base=0x0ec00000 mem_size:0x10000000(256 MiB)
  118. [    1.951951] vc-sm: Videocore shared memory driver
  119. [    1.952438] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
  120. [    1.968051] brd: module loaded
  121. [    1.968073] Loading iSCSI transport class v2.0-870.
  122. [    1.968821] usbcore: registered new interface driver smsc95xx
  123. [    1.968848] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  124. [    1.996751] dwc_otg 20980000.usb: base=0xf0980000
  125. [    2.196850] Core Release: 2.80a
  126. [    2.196866] Setting default values for core params
  127. [    2.196896] Finished setting default values for core params
  128. [    2.386015] random: fast init done
  129. [    2.397113] Using Buffer DMA mode
  130. [    2.397123] Periodic Transfer Interrupt Enhancement - disabled
  131. [    2.397130] Multiprocessor Interrupt Enhancement - disabled
  132. [    2.397140] OTG VER PARAM: 0, OTG VER FLAG: 0
  133. [    2.397151] Dedicated Tx FIFOs mode
  134. [    2.397898] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xc7514000 dma = 0x47514000 len=9024
  135. [    2.397922] FIQ FSM acceleration enabled for :
  136.                Non-periodic Split Transactions
  137.                Periodic Split Transactions
  138.                High-Speed Isochronous Endpoints
  139.                Interrupt/Control Split Transaction hack enabled
  140. [    2.397931] dwc_otg: Microframe scheduler enabled
  141. [    2.398076] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc0637570
  142. [    2.398089] WARN::hcd_init_fiq:460: FIQ ASM at 0xc063784c length 36
  143. [    2.398110] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
  144. [    2.398182] dwc_otg 20980000.usb: DWC OTG Controller
  145. [    2.398254] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
  146. [    2.398320] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
  147. [    2.398371] Init: Port Power? op_state=1
  148. [    2.398377] Init: Power Port (0)
  149. [    2.398717] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  150. [    2.398732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  151. [    2.398741] usb usb1: Product: DWC OTG Controller
  152. [    2.398749] usb usb1: Manufacturer: Linux 4.14.58+ dwc_otg_hcd
  153. [    2.398759] usb usb1: SerialNumber: 20980000.usb
  154. [    2.399649] hub 1-0:1.0: USB hub found
  155. [    2.399733] hub 1-0:1.0: 1 port detected
  156. [    2.400548] dwc_otg: FIQ enabled
  157. [    2.400557] dwc_otg: NAK holdoff enabled
  158. [    2.400565] dwc_otg: FIQ split-transaction FSM enabled
  159. [    2.400580] Module dwc_common_port init
  160. [    2.400994] usbcore: registered new interface driver usb-storage
  161. [    2.401339] mousedev: PS/2 mouse device common for all mice
  162. [    2.401402] IR NEC protocol handler initialized
  163. [    2.401410] IR RC5(x/sz) protocol handler initialized
  164. [    2.401415] IR RC6 protocol handler initialized
  165. [    2.401419] IR JVC protocol handler initialized
  166. [    2.401425] IR Sony protocol handler initialized
  167. [    2.401430] IR SANYO protocol handler initialized
  168. [    2.401434] IR Sharp protocol handler initialized
  169. [    2.401439] IR MCE Keyboard/mouse protocol handler initialized
  170. [    2.401443] IR XMP protocol handler initialized
  171. [    2.402512] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
  172. [    2.402952] bcm2835-cpufreq: min=700000 max=1000000
  173. [    2.403484] sdhci: Secure Digital Host Controller Interface driver
  174. [    2.403492] sdhci: Copyright(c) Pierre Ossman
  175. [    2.403997] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
  176. [    2.404166] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
  177. [    2.404174] sdhci-pltfm: SDHCI platform and OF driver helper
  178. [    2.404601] ledtrig-cpu: registered to indicate activity on CPUs
  179. [    2.404706] hidraw: raw HID events driver (C) Jiri Kosina
  180. [    2.404921] usbcore: registered new interface driver usbhid
  181. [    2.404928] usbhid: USB HID core driver
  182. [    2.405632] vchiq: vchiq_init_state: slot_zero = c7580000, is_master = 0
  183. [    2.407343] [vc_sm_connected_init]: start
  184. [    2.416269] [vc_sm_connected_init]: end - returning 0
  185. [    2.417098] Initializing XFRM netlink socket
  186. [    2.417150] NET: Registered protocol family 17
  187. [    2.417282] Key type dns_resolver registered
  188. [    2.419082] registered taskstats version 1
  189. [    2.421200] Btrfs loaded, crc32c=crc32c-generic
  190. [    2.428611] uart-pl011 20201000.serial: cts_event_workaround enabled
  191. [    2.428728] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
  192. [    2.431453] sdhost: log_buf @ c7513000 (47513000)
  193. [    2.516143] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  194. [    2.518136] of_cfs_init
  195. [    2.518314] of_cfs_init: OK
  196. [    2.548521] Waiting for root device /dev/mmcblk0p2...
  197. [    2.616391] Indeed it is in host mode hprt0 = 00021501
  198. [    2.665949] mmc0: host does not support reading read-only switch, assuming write-enable
  199. [    2.670004] mmc0: new high speed SDHC card at address e624
  200. [    2.676232] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  201. [    2.716450]  mmcblk0: p1 p2 p3
  202. [    2.728707] BTRFS: device label xbian devid 1 transid 788482 /dev/root
  203. [    2.732659] BTRFS info (device mmcblk0p2): enabling auto defrag
  204. [    2.732722] BTRFS info (device mmcblk0p2): use lzo compression
  205. [    2.732738] BTRFS info (device mmcblk0p2): disk space caching is enabled
  206. [    2.732757] BTRFS info (device mmcblk0p2): has skinny extents
  207. [    2.819135] BTRFS info (device mmcblk0p2): enabling ssd optimizations
  208. [    2.841460] VFS: Mounted root (btrfs filesystem) readonly on device 0:15.
  209. [    2.845093] devtmpfs: mounted
  210. [    2.849706] Freeing unused kernel memory: 468K
  211. [    2.849723] This architecture does not have kernel memory protection.
  212. [    2.856269] usb 1-1: new high-speed USB device number 2 using dwc_otg
  213. [    2.856597] Indeed it is in host mode hprt0 = 00001101
  214. [    3.199457] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  215. [    3.199490] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  216. [    3.201226] hub 1-1:1.0: USB hub found
  217. [    3.201477] hub 1-1:1.0: 5 ports detected
  218. [    3.516244] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  219. [    3.647008] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  220. [    3.647046] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  221. [    3.650710] smsc95xx v1.0.6
  222. [    3.750472] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:7d:cc:9a
  223. [    3.846769] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  224. [    3.884365] random: init: uninitialized urandom read (12 bytes read)
  225. [    3.978559] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8178
  226. [    3.978590] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  227. [    3.978605] usb 1-1.2: Product: USB WLAN
  228. [    3.978619] usb 1-1.2: Manufacturer: Realtek
  229. [    3.978633] usb 1-1.2: SerialNumber: 00e04c000001
  230. [    4.076293] usb 1-1.3: new low-speed USB device number 5 using dwc_otg
  231. [    4.169567] init: progress-report (startingmountall) main process (83) terminated with status 1
  232. [    4.218328] usb 1-1.3: New USB device found, idVendor=1997, idProduct=0409
  233. [    4.218362] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  234. [    4.218376] usb 1-1.3: Product: Micro Keyboard
  235. [    4.218390] usb 1-1.3: Manufacturer: Riitek
  236. [    4.257743] input: Riitek Micro Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1997:0409.0001/input/input0
  237. [    4.327893] hid-generic 0003:1997:0409.0001: input,hidraw0: USB HID v1.11 Keyboard [Riitek Micro Keyboard] on usb-20980000.usb-1.3/input0
  238. [    4.345402] input: Riitek Micro Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:0409.0002/input/input1
  239. [    4.407310] hid-generic 0003:1997:0409.0002: input,hidraw1: USB HID v1.11 Mouse [Riitek Micro Keyboard] on usb-20980000.usb-1.3/input1
  240. [    5.344591] BTRFS info (device mmcblk0p2): disk space caching is enabled
  241. [    9.747806] init: xbian-failaccess main process (96) killed by TERM signal
  242. [   10.269653] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  243. [   11.322287] init: failsafe main process (266) killed by TERM signal
  244. [   15.443105] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  245. [   15.853904] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  246. [   17.956147] random: crng init done
  247. [   20.757255] init: network-interface (wlan0) pre-start process (594) terminated with status 1
  248. [   64.264942] lirc_dev: IR Remote Control driver registered, major 243
  249. [   64.268946] IR LIRC bridge handler initialized
  250. [   64.274300] Registered IR keymap rc-rc6-mce
  251. [   64.274572] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0
  252. [   64.274873] input: gpio_ir_recv as /devices/platform/ir-receiver@12/rc/rc0/input2
  253. [   64.280146] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input3
  254. [   64.280789] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
  255. [   69.719337] usbcore: registered new interface driver rtl8192cu
  256. [  185.418219] init: wait-for-state (xbmcxbmc-loaded) main process (1217) terminated with status 100
  257. [  194.731215] init: xbmc-failed-start main process (267) killed by TERM signal
  258. [  194.849946] init: wait-for-state (zram-swapxbmc-done) main process (1525) killed by TERM signal
  259. [  203.470514] zram: Added device: zram0
  260. [  203.477586] zram: Added device: zram1
  261. [  203.486564] zram: Added device: zram2
  262. [  203.487489] zram: Added device: zram3
  263. [  206.557743] init: xbmc post-start process (1210) terminated with status 1
  264. [  209.965629] zram0: detected capacity change from 0 to 29360128
  265. [  215.215125] init: xbmc main process (1209) killed by TERM signal
  266. [  216.698079] Adding 28668k swap on /dev/zram0.  Priority:20 extents:1 across:28668k SSFS
  267. [  218.849820] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:250876k SSFS
  268. [  221.443931] init: wait-for-state (kill-splashxbmc-exits) main process (1992) killed by TERM signal
  269. [  319.795898] systemd-logind[3585]: New seat seat0.
  270. [  319.897226] systemd-logind[3585]: Failed to start user service, ignoring: Unknown unit: user@0.service
  271. [  320.047391] systemd-logind[3585]: New session c1 of user root.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top