[2018-11-21 18:26:27] [Output] : ★ Riley Baxter picks up the keypad, along with a packet of screws, a screwdriver and a drill.
[2018-11-21 18:26:32] [Output] : ★ Riley Baxter sets it all down on the counter.
[2018-11-21 18:26:44] [Output] : ADVERT: Rainer Lounge | Open now behind the Santa Maria Pay'N Spray | #-
[2018-11-21 18:26:49] [Output] : ★ Riley Baxter picks up the drill and keypad, setting it to the wall.
[2018-11-21 18:26:55] [Output] : ★ Riley Baxter would begin drilling two holes into the wall.
[2018-11-21 18:27:00] [Output] : ★ the holes would be drilled.      ((Riley Baxter))
[2018-11-21 18:27:15] [Output] : ★ Riley Baxter sets the drill down, threading two screws through the keypad, into the wall.
[2018-11-21 18:27:26] [Output] : ★ Riley Baxter picks up the screwdriver, beginning to tighten the first screw.
[2018-11-21 18:27:31] [Output] : ★ the first screw would tighten.      ((Riley Baxter))
[2018-11-21 18:27:37] [Output] : ★ Riley Baxter begins tightening the second screw.
[2018-11-21 18:27:42] [Output] : ★ the second screw would tighten.      ((Riley Baxter))
[2018-11-21 18:27:51] [Output] : ★ the keypad would attach to the wall.      ((Riley Baxter))
[2018-11-21 18:29:00] [Output] : ★ Riley Baxter attaches a wire to the keyfob,  connecting the other side to the smarthub.
[2018-11-21 18:29:20] [Output] : ★ Riley Baxter picks up a few cable clamps and begins threading the wire around the wall to
[2018-11-21 18:29:21] [Output] : ★ the hub.      ((Riley Baxter))
[2018-11-21 18:29:43] [Output] : ★ Riley Baxter would hammer down the clamps one by one until the cable was tied around the wall.
[2018-11-21 18:30:19] [Output] : ★ Riley Baxter connects the batteries into the keypad.
[2018-11-21 18:30:47] [Output] : ★ Riley Baxter would pick up the drill, screwdriver and smoke detector now.
[2018-11-21 18:31:16] [Output] : ★ Riley Baxter would use the hydraulic lift to raise herself to the ceiling.
[2018-11-21 18:31:30] [Output] : ★ Riley Baxter would pick the drill up, aiming it up towards the wall, along with the smoke detector.
[2018-11-21 18:31:43] [Output] : ★ Riley Baxter takes the front cover from the smoke detector, adding a battery to it.
[2018-11-21 18:31:55] [Output] : ★ Riley Baxter would line it against the ceiling, using the drill to drill two holes into the ceiling.
[2018-11-21 18:32:00] [Output] : ★ the holes would be drilled in.      ((Riley Baxter))
[2018-11-21 18:32:45] [Output] : ★ Riley Baxter sets the drill down, picking up the screwdriver and threading two screws into the ceiling.
[2018-11-21 18:32:51] [Output] : ★ Riley Baxter would begin tightening the first screw.
[2018-11-21 18:32:56] [Output] : ★ the first screw would tighten.      ((Riley Baxter))
[2018-11-21 18:33:04] [Output] : ★ Riley Baxter begins tightening the second screw with the screwdriver.
[2018-11-21 18:33:16] [Output] : ★ the second screw would tighten and hold the smoke detector to the ceiling.      ((Riley Baxter))
[2018-11-21 18:33:26] [Output] : ★ Riley Baxter picks the front cover up, attaching it to the ceiling.
[2018-11-21 18:34:05] [Output] : ★ Riley Baxter picks up the door contact, walking towards the front door.
[2018-11-21 18:35:24] [Output] : ★ Riley Baxter opens the front door, picking up a screwdriver and screws.
[2018-11-21 18:35:48] [Output] : ★ Riley Baxter sets the door contact against the hinge of the door, setting it against the frame.
[2018-11-21 18:36:01] [Output] : ★ Riley Baxter picks up the drill, aiming it to the two screw holes and using it to creates holes.
[2018-11-21 18:36:09] [Output] : ★ the drill would drill two holes through the doorframe.      ((Riley Baxter))
[2018-11-21 18:36:18] [Output] : ★ Riley Baxter sets the drill down, picking up screws and a screwdriver.
[2018-11-21 18:36:26] [Output] : ★ Riley Baxter begins tightening in the first screw.
[2018-11-21 18:36:30] [Output] : ★ the first screw would tighten.      ((Riley Baxter))
[2018-11-21 18:36:37] [Output] : ★ Riley Baxter would begin tightening the second screw.
[2018-11-21 18:37:07] [Output] : ★ the second screw would tighten and hold the door contact to the frame.      ((Riley Baxter))
[2018-11-21 18:37:25] [Output] : ★ Riley Baxter would run a wire from the contact to the smarthub.
[2018-11-21 18:37:41] [Output] : ★ Riley Baxter would use a hammer and wire clamps to conceal the wire along the wall.
[2018-11-21 18:38:29] [Output] : ★ Riley Baxter now picks up the panic button, moving to the first floor.
[2018-11-21 18:38:53] [Output] : ★ Riley Baxter would conceal it under the TV stand, using the adhesive pads to stick it in place.
[2018-11-21 18:40:19] [Output] : ★ Riley Baxter would now pick the first PIR motion sensor up, walking to the corner of the wall.
[2018-11-21 18:40:34] [Output] : ★ Riley Baxter would reach up, picking a drill up and setting the bracket towards the wall, drilling in fou
[2018-11-21 18:40:37] [Output] : ★ screw holes.      ((Riley Baxter))
[2018-11-21 18:40:43] [Output] : ★ the drill would drill the holes into the wall.      ((Riley Baxter))
[2018-11-21 18:40:47] [Output] : * Dean Baxter looks at their Watch. *
[2018-11-21 18:41:36] [Output] : ★ Riley Baxter would set the drill down, picking up a packet of screws and a screwdriver.
[2018-11-21 18:41:44] [Output] : ★ Riley Baxter threads the screws into the wall to hold the bracket.
[2018-11-21 18:41:54] [Output] : ★ Riley Baxter uses the screwdriver to tighten the first screw.
[2018-11-21 18:41:59] [Output] : ★ the first screw would tighten.      ((Riley Baxter))
[2018-11-21 18:42:06] [Output] : ★ Riley Baxter begins tightening the second screw.
[2018-11-21 18:42:10] [Output] : ★ it would also tighten.      ((Riley Baxter))
[2018-11-21 18:42:18] [Output] : ★ Riley Baxter tightens the third screw with the screwdriver.
[2018-11-21 18:42:23] [Output] : ★ that would also tighten.      ((Riley Baxter))
[2018-11-21 18:42:41] [Output] : ★ Riley Baxter tightens the last screw, using the screwdriver.
[2018-11-21 18:42:50] [Output] : ★ the last screw would tighten and hold the bracket to the wall.      ((Riley Baxter))
[2018-11-21 18:42:58] [Output] : ★ Riley Baxter attaches the motion sensor to the bracket, locking it in place.
[2018-11-21 18:48:11] [Output] : ★ Riley Baxter connects a wire to the motion sensor, lowering it down to an outlet and connecting it.
[2018-11-21 18:48:50] [Output] : ★ Riley Baxter picks up the keyfob, unpacking it and connecting it to her keys.
[2018-11-21 18:49:13] [Output] : ★ Riley Baxter would turn it on.
[2018-11-21 18:49:28] [Output] : ★ Riley Baxter would pick up the external siren and a drill with a long drill bit on the end.
[2018-11-21 18:49:32] [Output] : You try to move the door handle, but you notice that the door is locked.
[2018-11-21 18:49:33] [Output] : * Riley Baxter puts the key in the door to unlock it. *
[2018-11-21 18:49:34] [Output] : * Riley Baxter puts the key in the door to lock it. *
[2018-11-21 18:50:03] [Output] : ★ Riley Baxter sets it down outside, walking back inside and picking up a ladder, screwdriver and a packet
[2018-11-21 18:50:05] [Output] : ★ of screws.      ((Riley Baxter))
[2018-11-21 18:50:22] [Output] : ★ Riley Baxter walks back outside, setting the ladder up and climbing up.
[2018-11-21 18:50:34] [Output] : ★ Riley Baxter sets the siren against the wall of the second floor, on the side of the house.
[2018-11-21 18:50:46] [Output] : ★ Riley Baxter would pick up a drill, finding the four screw holes, beginning to drill them.
[2018-11-21 18:50:58] [Output] : ★ the drill would drill four holes into the wall, using the siren as a stencil.      ((Riley Baxter))
[2018-11-21 18:51:10] [Output] : ★ Riley Baxter sets the drill down, threading four screws into the holes.
[2018-11-21 18:51:23] [Output] : ★ Riley Baxter would use the screwdriver to tighten down the siren to the wall.
[2018-11-21 18:51:53] [Output] : ★ Riley Baxter places a battery into the siren, adding the front panel back on.
[2018-11-21 18:52:03] [Output] : ★ Riley Baxter would tighten the front panel back on with screws.
[2018-11-21 18:52:15] [Output] : ★ Riley Baxter lowers down the ladder, moving her tools back into the house.
[2018-11-21 18:52:34] [Output] : ★ Riley Baxter walks over to the smart hub, connecting it to an outlet and concealing it.
[2018-11-21 18:52:47] [Output] : ★ Riley Baxter uses a wire to connect the smart hub to the home router.
[2018-11-21 18:53:06] [Output] : ★ Riley Baxter would take out her phone, downloading the Yale app and connecting to the yale smart hub.
[2018-11-21 18:53:14] [Output] : ★ it'd show that the hub would need a first time setup.      ((Riley Baxter))
[2018-11-21 18:53:23] [Output] : ★ Riley Baxter would run through the setup and register with yale.
[2018-11-21 18:53:38] [Output] : ★ Riley Baxter checks the connections on the items through her app.
[2018-11-21 18:53:57] [Output] : ★ The door contact, keypad, siren and one motion sensor would show, all with full battery.      ((Riley Baxter))
[2018-11-21 18:54:22] [Output] : ★ Riley Baxter would register number to the smart hub, if ever it would detect, the smart hub
[2018-11-21 18:54:31] [Output] : ★ would give Riley's phone a notification.      ((Riley Baxter))
[2018-11-21 18:54:44] [Output] : ★ Riley Baxter would test the security.
[2018-11-21 18:54:58] [Output] : ★ the motion detector would sense Riley's movement and set the alarm off instantly.      ((Riley Baxter))
[2018-11-21 18:55:10] [Output] : ★ Riley Baxter uses the keyfob to disarm the alarm system.